Agent Maya Series Issues Two Through Four

Issues Two through Four available now, $1.99 each, full color, 24 pages (Two) 25 pages (Three and Four). Ten page previews here:
http://www.lulu.com/shop/erik-kreffel/maya-and-the-vestal-doll/ebook/product-22208637.html
http://www.lulu.com/shop/erik-kreffel/maya-and-the-clash-on-titan/ebook/product-22208657.html
http://www.lulu.com/shop/erik-kreffel/maya-and-the-don-of-venus/ebook/product-22208696.html
2155-56. Humanity has spread across the vast reaches of the Solar System, exploring, colonizing, mining and traversing its eight major planets and the zones therein. Despite this grand adventure, humans are just as criminal, and that's where the InterPlantery Tax Police, the IPTP,—represented by Agent Maya—enter. When crime syndicates, outer moons terrorist fronts and egregious corporations bent on chaos and conquest cause trouble, it's the little things that matter to bring them all to justice; because somebody's got to make them pay their taxes!

This is a follow up post after 6 months of use on the Kanex iAdapt 51.
This product is a piece of junk. It no longer stays connected to my computer. It loses the signal and stops working after a few minutes no matter if I am booting the computer or waking it from sleep.
I'm pretty computer savvy and after screwing around with all of the settings on the TV and computer, nothing worked. I have determined that it is fact the Kanex connection. I'm pretty sure the product has degraded to the point of not working at all now.
I would suggest not buying this product.
After attempting to working with Kanex, I found out that none of their contact forms or emails work so you can forget any support help too.
I am going to order the NewerTech version that offers the exact same connection:
http://www.newertech.com/products/tcblmdphdmid.php
I'll post back to this thread once I figure out how it works.

Similar Messages

SERIES ISSUE (Manual Number)

Dear Experts
We are using 2007 B PL 10.
We are entered AR Invoice using manual number (eg 15). When I entered AR invoice using numbering Series that particular number skip to another number (eg document created no 16).
How can i stop this? that is very series issue.
Pls sugges me ASAP
regards

Hi Gordon,
I want to upload Sales Order through DTW but in the Manual Series.
in which column i have to update the doc number.
Please Help..!!
Thanks
Saurabh

Issuing two outputs at a time.

For a given invoice,we have to issue ouput(Smartform) to Bill-to-party with BP Address.
Also we need to check the buying group(KNB1-EKVBD) of sold-to-party with that of Bill-to-party. If the buying group of SP and BP is different,then we need to issue output also to Payer with PY Address(instead of BP Address).So in this case we need to issue two outputs : one for SP and another for PY with different addresses.
How can we achieve this? All suggestions are welcome.

Hi Nikhil,
You will need some steps. First create an additional output type with exactly the same settings as RD00.
This output type should have a requirement that should only be processed in case the buying group differs.
Then in the smartform you should copy the address-node and both adress nodes should have a Condition: one to be processed in case of output type RD00 (regular invoice) and one with the condition to be processed in case of your newly defined output type.
Regards,
John.

Issues transfering through hdmi to tv

Issues transfering through hdmi to tv. Is there a way to troubleshoot adapter?

Hi,
Please look at "Sounds" on your machine:
Right click speaker ion,
Select "Playback devices",
Enable HDMI sound.
If it's not there what do you have ?
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

NI TestStand Advanced Architecture Series Has Two New Articles!

The NI TestStand Advanced Architecture Series consists of documents covering topics of interest to advanced NI TestStand developers. The series' authors are NI TestStand architects and developers who provide insightful content that goes beyond basic documentation by offering best practices for large and complex projects. The series will release new documents quarterly so check back to see what's new in a few months!
The NI TestStand Advanced Architecture Series has two new documents offering best practices for large and complex projects.
Best Practices for Improving NI TestStand System Performance discusses best practices for optimizing the performance of test stations developed with National Instruments TestStand software.
Best Practices for NI TestStand User Interface Development explains the best practices to design and develop your TestStand User Interface.
Both articles can be found in the NI TestStand Advanced Architecture Series.
Josh W.
Certified TestStand Architect
Formerly blue

I like the download price!
I've shared this doc with some friends already, thanks for the good work!
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

The Vita Lounge e-magazine issue two available now!

Hey everyone!
Over at The Vita Lounge we have amassed nearly 4000 news posts and 300 Vita game reviews as we continue to build a hub for Vita enthusiasts to learn more about the handheld. we are always looking at new ways to enage with the Vita audience, and despite the constant negativity, we continue to feel that the system has a lot to offer and make it our mission to bring this to you, the Vita owner! Inspired by a lifelong love of gaming magazines as well as the OPC's own community magazine, we have now launched our first issue of The Vita Lounge Magazine!
This first issue has 48 pages and is filled with 20 reviews from the first quarter, an interview with the bafta award-winning Roll 7, a recap of what has been on PlayStation Plus, community features for Minecraft and a chat with the fabulous GadgetGirlKylie from Youtube! If you are a Vita owner and have a few minutes free then we would really appreciate it if you could have have a read!
TVL Magazine #1
Publish at Calameo or read more publications.
Work has already started on issue two, so your opinion,feedback and support will really help us move this project on! we want to reach as many Vita owners as possible, but we also want to build a community resource and something that YOU want to read. Features and suggestions will be greatfully received and taken onboard for future issues!
Thanks for reading and I look forward to reading your feedback and thoughts!
http://en.calameo.com/read/004256142f68815403d87
UPDATE 15th June - Issue 2
With 18 reviews including a magazine-first Gundam Breaker 2 import review and cover title Broken Age, the magazine also contains magazine-exclusive interviews with Drinkbox Studios, Image & Form as well as Oddworld Inhabitants talking all about New 'N' Tasty and its journey to the Vita. we also have more great community content.
We hope you enjoy this issue, let us know your thoughts!
TVL Magazine #2
Read more publications at Calaméo
http://en.calameo.com/read/004256142daa5cf850741

Hello everyone!
I've got a big update here for the Vita owners among you as we have today launched Issue 4!
With 48 pages filled with the latest Vita content, it's the best way to stay up to date with everything in the world of Vita, and includes:
14 reviews including J-Stars Victory VS +, Geometry Wars 3 Dimensions Evolved and cover title The Swindle
Magazine Exclusive - 4 great developer features with Rain Games (Teslagrad), Behind the Stone (Sir Eatsalot) and Size Five Games (The Swindle) alongside Curve Digital
Magazine Exclusive - An editorial on a growing lack of release parity
Magazine Exclusive - an import review of the rather lwed Moe Chronicle
Magazine Exclusive - A look at the Vita in Paris Vita community, who explain what they are about
It's monthly, it's FREE and we make it for you! We hope you enjoy it!
TVL Magazine #4
Read more publications at Calaméo
For some reason I seem to have missed out on Issue 3 here, so here is Issue 3 too!
This issue has 44 pages and includes:
13 reviews including Octodad: Deadliest Catch, Tetris Ultimate and cover title Steins;Gate
Magazine First - 3 great developer features with Young Horses (Octodad), Ackk Studios (YIIK) and XMPT Games (DiscStorm)
Magazine Exclusive - Greg Miller, ex-IGN and of Kinda Funny writes about those "legacy system" comments and the Vita
Magazine First - an import review of Puyo Puyo Tetris
Magazine Exclusive - GagdetGirlKylie tells us what she has been playing and SJ Hollis from Punk and Lizard explains about reviewing to a deadline
Like all of our issues, this one is also FREE digitally!
TVL Magazine #3Read more publications at Calaméo
Thank you for reading, and thanks for your support! All of our issues can be downloaded as a PDF for FREE via this page on our website.
If you have any comments, feedback or suggestions or even ideas then please let me know. I want to reach as many Vita fans as possible with this - we all know the struggles but the little handheld does have a following, and the audience does need reaching!
i'm not going to plug the links here, but we also do this in a PRINT version which we post worldwide, which can be supported via our Patreon or individual copies can be purchased from our website.
Thanks again for reading and I hope you enjoy these issues!

The accursed little dark gray ball with white in the center and white arrows, either two or four, which seize control of the screen and move the text or pictures up, down, left, right and can be stopped only by finding the ball and clicking it. I want to

The accursed little dark gray ball with white in the center and white arrows, either two or four, which seize control of the screen and move the text or pictures up, down, left, right and can be stopped only by finding the ball and clicking it. I want to stop the thing permanently. Firefox 3.6 and 3.64
== This happened ==
Every time Firefox opened
== with 3.60

The accursed little dark gray ball with white in the center and white arrows, either two or four, which seize control of the screen and move the text or pictures up, down, left, right and can be stopped only by finding the ball and clicking it. I want to stop the thing permanently. Firefox 3.6 and 3.64
== This happened ==
Every time Firefox opened
== with 3.60

HT1349 Help! I downloaded a tv series and two rentals in my itunes account, synched to my itouch, and cannot find them on my itouch, what am i doing wrong

Help! I downloaded a tv series and two rentals in my itunes account, I synched to my itouch, and i can not find them on my itouch...what did i do wrong

First off the App Store app cannot be deleted from your phone. The same holds true for all of the default apps. Your kids may have turned on Restrictions in the Settings app that hides the App Store app but, again, it cannot be deleted.
When you connect a phone to iTunes on your computer I suggest you view the left sidebar in iTunes. If you do not have a left sidebar in iTunes use the View Menu to View Sidebar. When you connect your phone to your computer it will be listed in that left sidebar.
Select your phone in the left sidebar.
In the Right window a row of tab will appear. Select Apps.
Then select the apps you want on your phone. You do not drag apps to your phone.
After you have selected the apps you want synced to your phone click on Apply or Sync. And let the process complete. The apps you selected will be copied to your phone.

Issues scrolling through text messages

Hi there,
I just got a brand new blackberry, and am having issues scrolling through some text messages. Only some, and not the same ones all the time. Some I can scroll through, others I can't, and which ones I can scroll through varies. Later, it works fine. It's pretty annoying though. Advice?
Thanks!

I'd start with a battery pull first to reset the device. See if that helps.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Two Issues: Connectivity through a PC and problems with Airport Extreme

Hello, I am fairly new to the Mac universe and not TOO knowledgeable about computers in general, so here I am asking you two questions that may appear simple or even lazy to some of you. Excuse me for that.
I just bought this Macbook yesterday, and the the wireless connection was working alright. Today, I can't get online trough browsers and other programs, even when Airport says it is perfectly connected, with no problems whatsoever. I've alredy checked, re-checked and reconfigured all there was to it and nothing happens anyway. I have noticed this problem is pretty frequent from up to Mac OS X version 10.5.2, and I see a lot of inquiries from other members but no universal resolution from either the community or Apple themselves.
If anyone can indicate me the way to a patch I haven't stumbled, or the most functioning solutions from other users I would be very thankful!
The other issue I have is that since I have this problem, I would like to know how can I connect to the internet using a PC laptop's wireless connectivity. Down where I live, I receive a free wireless connection to my PC, from which no password is required and no problems are perceived. What (software, hardware, cables) do I need, and how can I make it so I could freely browse the web with my Macbook using the PC's connectivity?
Thanks for all your time reading and helping me to break this problem. Connecting to the internet is fundamental for me at this moment, so I appreciate all your help. BYE.
Message was edited by: Kutch'a

Hi marielouise -
Greetings and welcome to the Apple boards.
Does this help: Networking with a Windows PC?
Luck-
-DaddyPaycheck

Reporting Agent - Print Layout - Issue in Displaying Key Figures in Rows

Hi,
We have issue while printing reports using Reporting Agent. As part of Query Definition we have Structure of key figures in Rows. But while creating Reporting Agent , in Print Layout option Under Table Rows we are not able to drag Structure of key fig.
What could be the solution to this issue. How can we use key figures in rows?
Thanks in advance.
Samir

Hi,
putting product in the rows will slove the issues as the unit cost depends upon the prdoduct and therefore it will uniquely identify each of the material and then it will get multiplies with the qty and therefore you will get the correct result.
this kind of issue you will always face when you are going to multiply cost with the Qty and as the cost differ with the individual material.
Also putting material into the rows will cause the no. of rows to increase as all the materials will show up in the individual rows for the particular month.
Also you can make a claculated key fgure for the multiplication and use before aggregation.
But for that your both the key figures should be in the same cube i.e. in the same rows or the before aggregation will not work you will not even get an option of before aggregation in the CKF if the key figures belong to two different cubes.
Since your qty and cost are coming from two different cubes before aggreagtion will not work here.
And if you do before aggregation then you report will become quite slow as it will do all the multiplication anf then will bring the result.
So it depends on your requirement and your design how to proceed.
Hope it helps
Thanks

Work Items to PR Agents (Only one of two agents received)

Dear all,
I am facing a problem like this:
In my PR Workflow, the task TS00007986 is assigned agents by position. There is one position applied for a particular release strategy and there are two agents under this position.
Now, there is one PR created, it went to the correct release strategy and thus sent to the correct agent. However, only one of the agent is receiving that work item while the other don't. In another words, instead of sending to both the agents, only one received.
In SWEL, the possible agents are showing both agents' names, but the icon "In User's Inbox" is only appearing on one of the agent.
I would like to know, what would be the possible error for this and in such cases, how could I trace the errors?
Thank you very much in all advances.

Here's an update on this issue:
For example, the two agents are Agent A and Agent B.
I think Agent A and Agent B both received the work items. However, Agent A executed the work item but later canceled the action without processing the work item (approved or rejected the PR). When Agent A executed the work item, the same work item would be removed from Agent B's inbox, but it is still in Agent A's inbox.
The problem is, the work item has yet to be processed. In this case, how this issue should be solved (only processed work item is removed from all the agents' inbox)?
Thank you very much.

Airport Extreme issue connecting through usb to freeagent external hdd

I have a brand new 15"MacBook Pro and am using an Airport Extreme for wireless internet throughout my house. That part of the system seems to work fine. My problem is that I want to connect both my printer and FreeAgent hdd to be accesses through my wireless network. When I plug in a 4 port hub everything seems fine (green light). When I plug in the Free Agent hdd the light immediately turns to blinking amber. In airport utility the hdd does not show up but I get a message which says "disk needs repair". If I plug the hdd directly into my MacBook I can can see it, read from it and write to it fine. I can't find anything that indicates that the hdd wouldn't be compatible with the Airport Extreme. Help!

You can access the AirPort Disk via normal file-sharing connection options, such as selecting the server from any Finder window’s sidebar in the Shared section. AirPort Disk uses two standard methods: AFP (for Macs) and Samba (for Windows or Linux).
Leopard accesses AirPort Disks through the Finder, just like any other network volume. Open any Finder window, and look in the sidebar for a list of servers in the Shared section. You should find your AEBSn.
To mount an AirPort Disk volume, follow these steps:
1. Select the AEBSn in the Sharing section of the sidebar.
2. To connect as a Guest user, you need take no more steps; To use a named account, click the Connect As button in the upper right and enter your credentials.
3. Double click a volume that’s shown to mount it on your system.
For both Windows XP and Vista, open the network browser by double-clicking Network on the Desktop. The base station name should appear in the Network browser.

IMac G3 chimes two to four times upon boot and fails to load.

Hello, all.
Today, I moved my aunt from my old iMac G3 to my less old iMac G4. The iMac G3 was working great still at her house, so I decided to take it home with me to replace the iMac G4. I didn't really plan on using it to any extent, but thought it would be cool to have still working.
So I pop it in the car on the passenger seat, drive the mile back home, and unload it onto my desk. I plug power, ethernet, keyboard/mouse and a USB extension cable in, and attempt to boot. When I hit the power button, the iMac makes an attempt to chime, but it kinda does two loud chimes, a faint third chime, and a fourth loud chime. After that, it just sits there with the power button light on and nothing happens.
Now I'm gonna admit it. This was done on an extension cord coming off of a three-way splitter coming off a power strip. Not the safest or most practical way to do this, but I figured that since it worked with my old eMac G4 that had a 17" CRT, it would work with my iMac G3 with a 15" CRT.
So I moved the power directly to the wall. This time, I plugged in only the power and nothing else. I press the power button, and it still does the weird chime and fails to load.
So does anyone have any clues as to what to try? Before you tell me to bust this thing open, I'm gonna say this: I am deathly afraid of CRT monitors, and generally stay as far away as humanly possible from them. The iMac has had a history of few problems, but one of those was a loud, high pitched noise coming from the screen when it was in my aunt's basement. This was probably due to being to cold, or humidity, but switching screen resolutions seemed to fix it. I could switch back and it went along fine. I know it's the screen that was making the sound because my eMac had done the same thing just a week prior, even though it was in an environmentally-sound room, along with some other computers.
Anyway, she has since moved the iMac G3 up to the main part of the house that stays at a fairly steady 75F or so year round and doesn't get too humid. It's worked great, and we were gonna move her up to the G4 for speed benefits and so that she could video chat in Skype. When I last powered down the iMac G3, it was running absolutely fine. I got all the important data off it (thank God) and transferred to the iMac G4. I gently, without bumping it on anything, took it out to the car, gently set it on the foam-cushioned seat, and gently drove it home. When I got it home, I gently took it out, gently took it to the desk, and gently set it down. After a while, I put it screen-down on my lap to read the stuff on the bottom. I undid the RAM cover, popped out a stick, and put it back in. I haven't really gone back to check, but I'm about 90% sure that I got it in perfectly fine. After I looked at it, I gently set it back on the table and did the whole boot process that I explained earlier.
So what in the world could be causing this? Did I really bump it on something, or could it be a weather problem, or could it be that it decided to just stop working at the most perfect time?
Specs are as follows:
iMac G3 600 mHz Graphite
Mac OS X Tiger 10.4.11 or whatever the last update was
1GB RAM
40GB HD
ATi Rage 128 or whatever it is that's in these things
Combo drive
No Airport card
No internal mods
Never been opened since I purchased it in late 2006.
Also, I think this would be the best place to note that there are little red pieces of what appears to be hard plastic. It looks to be about as thick as the casing that goes around the back. I remember it being in the speaker grill when I first got it, but after moving around, it has moved mostly to the bottom, just under the CD-RW/DVD drive. You can clearly see it through the translucent plastics of the iMac's casing. Not sure what the heck it is, how it got there, or if it has any significant importance to the problem at hand, but I figured it would be worth a shot by shouting that out.
OH, one more thing. I noticed, on the last successful boot at my aunt's house, that the sound would not work. I tried moving the slider up to change the volume, and nothing worked. It wouldn't turn the sound on. Very mysterious. Other than that though, it hasn't had any issues that I've seen.
Sorry for the huge post, but I just want to know if it's my stupidity stopping it from booting or if it really did just decide to end its usable life at the precise moment it wasn't absolutely needed anymore. I will check the RAM and post back if that fixes anything, so if there isn't a reply from me saying that I checked RAM and it fixed it, then it's still being a problem and the RAM wasn't the problem.
And if it really did just decide to stop working, does anyone know of anyone that puts Mac Mini's inside iMac G3 cases? It would be pretty freaking awesome if I could take my Mac Mini, put it in there, and possibly get rid of the CRT and replace it with an LCD panel. I've heard that it's been done before, but again, I'm deathly afraid of the stupid things that are CRT screens. Long story short, one imploded about three yards away from me and it scared the living **** out of me. I really wish all CRTs would just STOP working RIGHT NOW so that everyone had to move to LCD screens. It would make my life so much easier. Hey, why not start with my iMac? All right everyone, if you own a CRT monitor or a computer with a CRT monitor built in, make sure it isn't working by Tuesday, okay? *Shudders in fear of an imploding CRT...*

Since you removed/re-installed one of the memory DIMMs from the computer, that's the most likely culprit (as the computer worked perfectly earlier). Remove it again and re-install, making sure that it's fully-seated in the slot and that the locking levers snap closed at each end. Try booting the iMac again. If unsuccessful, immediately insert your Tiger installer DVD when you power ON and hold down the C key. If it boots to the Tiger disk, run Disk Utility to scan and repair the hard drive.

Agent health state issues

scom2012R2
Under Monitoring - Operations Manager-Agent Details-Agent Health Status
I have a number odd server states showing, i.e.,
1) Agent State from Health Service Watch pane shows server as critical
while Agent State pane shows state as healthy - grey circle with check mark
Tried a agent repair and no change
2) Agent State from Health Service Watch pane shows server as healthy with green cirlce and check mark
while Agent State pane shows state as green circle not monitored
Tried a agent repair and no change
3) Agent State from Health Service Watch pane shows server as critical
while Agent State pane shows state as grey triangle Warning
Tried a agent repair and no change
Under Active Alerts a number of servers show as critical with Alert Details as
This monitor indicates that the target System Center Management Health Service that this Watcher is monitoring was not able to load internal system rules.
It says the resolution is to do a repair but that did not help
NM

Hi,
This two views are important – because it gives us a perspective of the agent from two different points:
1. The perspective of the agent monitors running on the agent, measuring its own “health”.
2. The perspective of the “Health Service Watcher” which is the agent being monitored from a Management Server".
If any of these are red or yellow – that is an excellent place to start. This should be an area that your level 1 support for Operations manager checks DAILY. We should never have a high number of agents that are not green here. If they
aren't – this is indicative of an unhealthy environment, or the admin team not adhering to best practices (such as keeping up with hotfixes, using maintenance mode correctly, etc…
Use Health Explorer on these views – to drill down into exactly what is causing the Agent, or Health Service Watcher state to be unhealthy.
Please go through the link below for more details:
http://blogs.technet.com/b/kevinholman/archive/2009/10/01/fixing-troubled-agents.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Agent Maya Series Issues Two Through Four

Similar Messages

Maybe you are looking for