Agent not resolved for rule 168(US Manger)

I am activating Travel request approval WF 20000050 in the event linkage is working properly ie the workflow is getting triggered and end in error . the technical logs shows that rule resolution to 00000168 to get the manager is not resolved (agent not resolved ) .
The task is general so there should be no conflicts in finding manager .
The HR consultants has created the org structure and it should work fine .
Please advice what could be the cause of it and does it has some thing to do with SWU3 some steps in classify task as general were red ( now I have have executed it and is so green now )
Please throw some lights also on how can I test the rule .. 00000168 (if there is some error in HR config ) or do I need to some thing in PFAC

Hi Arghadip,
any ways i found that there is some thing wrong in HR setting because agent resolution is working fine in IDES OR do we need to do some thing in that rule some thing like activation or it's some problem with HR configuration ..
Thanks in tons u r answers are very helpful ..
well i will need lot of u r help )-: .. hope u will enjoy helping me (-:

Similar Messages

Agent Not Found for rule 168 in Travel Management WF WS20000040

Hi,
I got a strange error occurring that I can not quite figure out. I am using a copy of a standard delivered SAP Work flow for Trip Approval (WS20000040) that is identical to the SAP delivered workflow except without the expense department tasks (we only need manager approval). I also updated the agent assignment for tasks TS20000131, TS20000139, and TS20000189 to be General Tasks. When an employee creates a trip, the workflow is started properly and goes to the first workflow step which is user decision step 416. It uses rule 168 to determine the manager of the workflow initiator. This works properly. The manager goes to their inbox and executes this workflow step. The trip changed and trip approved buttons work fine, but if the manager chooses the reject button, the form is closed and the workflow stops with an error. The next step down the reject path is an activity step 476 - enter and send message. This runs task TS20000139. The agent assignment also uses rule 168 to determine the manager of the workflow initiator. The same agent should be choosen for both this step and the previous step since the workflow initiator is the same for both and the same rule is being used. The advance with dialog check box is checked in both steps. Both step refer to tasks that are both marked as synchronus object methods and object method with dialog.
For testing purposes, I changed the agent determination in both workflow steps to be the workflow initiator and ran it. The workflow stopped at the approve trip facts step as expected and when I choose reject trip, I was taken immediately to the create mail task that task TS20000139 runs as it should. I tried creating a trip as the employee and the manager and it work properly in both occasions regardless of which user the trip was created under when just workflow initiator is used for agent determination.
I ran SWI2_DIAG to look at the errors that occurred when it stopped in error when I used rule 168. According to the error message, the approve trip fact step completed successfully, but the enter and send message step failed with no agent found. Following is the error message:
Workflow WS90000048 no. 000000277688 activity 0000000476 role 'AC00000168': No agent found
What I don't understand is that the agent determination for the approve trip facts step which works perfectly uses the same agent determination as the enter and send message step which is terminating with an error. Also when I change both steps to use workflow initiator as the agent, then they both work perfectly.
Help, Please
Gregg
Edited by: Gregg Hinkle on Feb 12, 2008 4:48 PM

Thanks Martin,
I used your suggestion and passed the actual agent from the prior task to the container and then used this value as an expression to determine the agent for the step that was causing me pain. Now the workflow step is continuing properly and automatically bringing up the create message step as expected.
Arghadip,
I tried your idea about creating a copy of the standard delivered workflow and even set it as a general task and I got the same result as with the standard SAP (error with no agent found).
Thanks again for everyone's assistance

No exact match was found. Click the item(s) that did not resolve for more options. You can also use Select button to choose External Data.

HI,
I have SharePoint Online 2013 environment, i have created a external content type from wcf service. I want to use this as External Data column in document library. When i look for values in content type it populates and when i click any values and adds and
then click saves it shows the below error
No exact match was found. Click the item(s) that
did not resolve for more options. You can also use Select button to choose External Data
__fkc000950056003700kc000950056003700kc000e400f2001400kc000950056003700k830035004700160027004700d20057000700020064009600870056004600:
No Matching Items
Please help on this.
varinder

I don't understand the question exactly, could you restate it. Sorry mate, I might just be braindead.
But, as far as the issue, it is by design. the column is a lookup columns which essentially ties to the external data. if that data is removed, the column on your simple list becomes invalid and any edits of the simple list item will require
it to be changed.
are you wanting to make the ECT read only? that's simple enough. you can pop open SPD and edit the ECT, then remove the C/E/D operations (create/update/delete). That will not, however make it read-only in any other systems that access that
external data, as I assume its not just SP or else it wouldn't be external
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

DW CS5.5: Javascript error while executing onLoad in Date_beforeSave.htm Not resolved for me!!!

Hello,
I'm having trouble when moving or renaming files. Linked files are automatically updated, but the following error message appears for each file: "While executing onLoad in Date_beforeSave.htm, a Javascript error occurred".
I tried the solution found in a previous discussion (http://forums.adobe.com/message/757114#757114), that is to say: deleting the .dat file located in the "Applicaion dataAdobe\Dreamweaver CS5.1\Configuration" folder. But it doesn't work.
I also tried by reinstalling the whole CS5.5 pack, but no result.
I also had trouble while installing the CS5.5 Web Premium pack (on Windows XP Pro). Maybe the 2 problems are related?... As the installation was done, an error message appeared saying that some errors occured. Here is part of the error status:
"- 0 fatal error(s), 14 error(s), 11 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
            Family: Photoshop
            ProductName: Adobe Photoshop CS5.1 Core_x64
            This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: DW025: The payload with AdobeCode: {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
            Family: Adobe Web Suite CS5.5
            ProductName: Adobe Media Encoder CS5.5 X64
            MinVersion: 0.0.0.0
            This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
            Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
            Family: CoreTech
            ProductName: Adobe Player for Embedding x64 3.1
            MinVersion: 0.0.0.0
            This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
            Removing this dependency from list. Product may function improperly."
Please, can anyone help?

OK, I'll try to explain more clearly (excuse me if my English is imperfect, because I'm French).
In fact, I'm facing 2 problems, which could be related or not.
First, when I installed Creative Suite 5.5 some months ago, I received an error at the end of the installation. You can download a copy of the report here: https://www.box.com/s/5m4k6xv68h00cpumwil9
However, I could use the Adobe softwares without observable problem... until those last days...
So, second and really annoying problem that I only detected those last days (maybe I didn't use the implied function before, but I'm not sure). When using DW, if I want to rename or to move some HTML files in a defined website, all the linked files will be automatically updated. As the automatic update is proceeding, I receive, for each updated file, the following error warning: "While executing onLoad in Date_beforeSave.htm, a Javascript error occurred". And I have to click "OK" to each warning in order the processus to go on. The result of the automatic update is uncertain: some files have been properly updated, some other not.
As I already explained in my first post, I tried (unsuccessfully) to resolve by those two means:
deleting ".dat" file in the "config" folder
reinstalling CS5.5 (same error report received as when I first installed).
I hope that I've been more clear that time and that you'll be able to help me! Thanks!

Database Upgrade Agent not working for upgrading Oracle 9i DB to Oracle 10i

Hi All,
Presently I have completed my Oracle 10i installation on Solaris Server but I am facing an issue during the upgrade process of Oracle 9i to 10g. Whenever I try to upgrade the 9i databases to 10g using DBUA(Database Upgrade assistant) I am facing an issue that Data base not running from oracle home or pfile not found. The exact error message says:-
The upgrade assistant failed in bringing up the database XIPCOTS. Oracle Home /opt/apps/home/oracle9i/product/releases/92/92 obtained from file /var/opt/oracle/oratab was used to connect to the database. Either the database is not running from Oracle Home /opt/apps/home/oracle9i/product/releases/92/92 or the correct Initialisation parameter file (pfile) was not found. To start the database , Oracle needs the pfile. Provide the full path name of the init file for the database XIPCOTS.
In reality the XIPCOTS database is running fine in Oracle 9i and we can connect it using PL/SQL developer in windows.I have also provided the path of pfile but it is still not accepting the same.
Path of pfile I provided :- /XIP/ofaroot/XIPCOTS/pfile/initXIPCOTS.ora
Any help or suggestions would be greately appreciated.
Our both Oracle 9i and 10g are installed on same Solaris server where solaris version is 9
Installation path for 9i :- /opt/apps/home/oracle9i/product/releases/92/92
Installation path for 10g :- /opt/apps/home/oracle/product/releases/10201
Oracle 9i version :- 9.2.0.7
Oracle 10g version :- 10.2.01
Thanks in advance.
Best Regards,
Gourav Banerjee

Can you please mention the specific folder name under oracle home where we need to put this pfile because there are two folder dbs and ds I have allready tried putting it inside dbs its not working. And my home path is correct I hope and is set for oracle 9i directories in the .oraenv file do we need to set it for oracle 10g before the DBUA upgrade.

Rule 168 unable to get superior

I am trying to activate a workflow but getting error . The technical log details shows that the superior(manager) cannot be resolved in rule 168 . while testing the rule 168 I can get the superior of person by passing
Extended object id = Position
and
object type = S
but when I try to find the superior by passing
Extended object id = SAP log on name
and
object type as US
I am unable to get the superior ..
Please advice what could be the cause of it . do we need to change some HR setting ie saving relation in some info type or some thing can be done in workflow to resolve it .

while testing the rule 168 I can get the superior of person by passing
Extended object id = Position
and
object type = S
but when I try to find the superior by passing
Extended object id = SAP log on name
and
object type as US
I am unable to get the superior ..
<b>actally when we use position or empid whith respective id type the testing of rule seems to be working fine but when we use object type 'US' and provide sap id it does not find it superior .. the all cases are in testing of rule using pfac_dis and whith the same empids .</b>
as these all cases are in pfac_dis by default the rule uses type US ? or we have some setting for it

OC4J: Class not found for class in jar file placed in \j2ee\home\applib\

I have an ADF application which uses external libraries (jars), which works fine when running the application from within JDeveloper (TP4).
However if I deploy the application to the embedded OC4J server it won't find any classes imported in those external libraries at runtime (deploy does work). E.g. one library class imports oracle.jbo.server.DBTransaction. If a method of this class is called I get the following exception:
Unexpected exception caught: java.lang.NoClassDefFoundError, msg=oracle/classloader/util/AnnotatedNoClassDefFoundError
oracle/classloader/util/AnnotatedNoClassDefFoundErrorThe same exception, when using a german locale, explicitely states that it cannot find oracle.jbo.server.DBTransaction.
The jar files are placed in the \j2ee\home\applib\ directory and a <library> element to this path is present in application.xml.
Any further hints what could be wrong?

Hi Edwin,
tried your suggestions but without success.
when I add this library to server.xml then following error occures when starting OC4J
17.09.2008 17:10:33 oracle.oc4j.util.SystemLog log
SCHWERWIEGEND: Server start failed processing configuration
java.lang.InstantiationException: Illegal tag, 'library': The library tag has moved from config/server.xml to config/application.xml, please update your configuration manually or reinstall.
        at com.evermind.server.XMLApplicationServerConfig.parseDeploymentMainNode(XMLApplicationServerConfig.java:1227)
        at com.evermind.xml.XMLConfig.parseRootNode(XMLConfig.java:342)
        at com.evermind.xml.XMLConfig.init(XMLConfig.java:222)
        at com.evermind.xml.XMLConfig.init(XMLConfig.java:154)
        at com.evermind.server.XMLApplicationServerConfig.<init>(XMLApplicationServerConfig.java:237)
        at com.evermind.server.ApplicationServer.createConfig(ApplicationServer.java:661)
        at oracle.oc4j.server.ServerFactory$Worker.prepareConfig(ApplicationServerFactory.java:225)
        at oracle.oc4j.server.ServerFactory$Worker.start(ApplicationServerFactory.java:244)
        at oracle.oc4j.server.ServerFactory$Worker.run(ApplicationServerFactory.java:259)
        at java.lang.Thread.run(Thread.java:619)
17.09.2008 17:10:33 oracle.oc4j.util.SystemLog logNoStack
SCHWERWIEGEND: Server exiting: ApplicationServer entered state EXITING--> I added this to application.xml
Than I enabled more logging of classloader "-Duser.country=US -Dclass.load.log.level=finest"
Here a snippet of the output at starttime of OC4J:
================================
08/09/18 10:17:07 Initial class loaders created. Uptime: 3156ms.
08/09/18 10:17:07 Loading main class com.evermind.server.OC4JServer...
08/09/18 10:17:07 com.evermind.server.OC4JServerMain class loaded. Uptime: 3344ms.
08/09/18 10:17:07 Transferring to com.evermind.server.OC4JServer.main()...
08/09/18 10:17:15 Ignoring non-existent code source: D:\oracle\jdevstudio1111_preview4_standalone\j2ee\home\config\..\..\..\BC4J\lib\jmxdc.jar(from <code-source> (ignore manifest Class-Path) in /D:/oracle/jdevstudio1111_preview4_standalone/j2ee/home/config/server.xml)
08/09/18 10:17:15 Ignoring <code-source> (ignore manifest Class-Path) in /D:/oracle/jdevstudio1111_preview4_standalone/j2ee/home/config/server.xml entry: code-source /D:/oracle/jdevstudio1111_preview4_standalone/j2ee/home/lib/api-ext/adflogginghandler.jar (from system property api.ext.dirs) is already visible in the search path of adf.oracle.domain:11.1.4949.
08/09/18 10:17:15 Ignoring non-existent code source: D:\oracle\jdevstudio1111_preview4_standalone\j2ee\home\config\..\..\..\BC4J\lib\jmxdc.jar(from <code-source> (ignore manifest Class-Path) in /D:/oracle/jdevstudio1111_preview4_standalone/j2ee/home/config/server.xml)
08/09/18 10:17:15 Import was not resolved for adf.oracle.domain:11.1.4949: shared library "oracle.fabric.runtime" could not be found.
08/09/18 10:17:15 Import was not resolved for adf.generic.domain:11.1.4949: shared library "oracle.fabric.runtime" could not be found.Seems that oracle.fabric.runtime couldn't be found but the jar's are located in D:\oracle\jdevstudio1111_preview4_standalone\lib\java\shared\oracle.fabric.runtime\11.1.1.0.0
It's the same as with my jdeveloper installation where I don't have this problems.
regards
Peter

Workflow issue-Agent not maintained

Hi All,
I have a workflow issue. For a PR, the workflow is throwing up the error as :
"Agent not maintained for plant XXXX planner group XXXX release code.
Please maintain an agent for the above key in the Agent AssignmentTable,and forward the workitem with text "Release requisition XYZ" in your Workflow inbox to an appropriate Approver."
Please help me out on this one.
Thanks,
Swati.

HI
Check 'Agent Assignment' in not green..
Then push the button 'Agent.Assign for TASK' in front of 'Agent Assignment'.
Next, You can go the maintain screen.
Push 'F8' or 'Attributes...' and check 'General Task'.
and try again..
Good luck

Rule 168 to work with org structure and not relationships

Hi,
I would like to use rule 168 to work with the organizartional structure and not the relationships maintained in PO10 organizational unit.
this is because i want the agent to be the person with the red hat and not the a002 relationship maintained in organizational unit. i tried using rule 157 but it does the same thing and determines agent based on relationships maintained in org unit.
basically i dont want the agent to be any of the line mangers which may have been set up, i want it to be the red hat of the org structure
does anyone know how i can do this, or will i need to delete the relationships between staffing?
Thanks
Forhad

Here is a code example to read from the tables in base to the personnel number emulating the SWE_GET_MANAGER function, I hope this helps. Regards.
Z GET MANAGER *******************
***Gets the position for the creator of the requisition
clear V_OBJID.
select single objid into V_OBJID from HRP1001
   where otype = 'S'        and
          plvar = '01'       and
          rsign = 'A'        and
          relat = '008'      and
          begda <= sy-datum and
          endda >= sy-datum and
          infty = '1001'     and
          sclas = 'US'       and
          sobid = pt_cont-VALUE+2.
if sy-subrc = 0.
   valid if the user has personnel number don't proceed to look for the chief
     clear V_OBJID2.
    select single objid into V_OBJID2 from HRP1001
     where otype = 'S'        and
           objid = V_OBJID    and
           plvar = '01'       and
           rsign = 'A'        and
           relat = '008'      and
           begda <= sy-datum and
           endda >= sy-datum and
           infty = '1001'     and
           sclas = 'P'.
    if sy-subrc <> 0.
   if the user exist in the correspondant date gets the chief position
      clear V_POS_SOBID_CH.
      select single sobid into V_POS_SOBID_CH from HRP1001
       where otype = 'S'        and
             objid = V_OBJID    and
             plvar = '01'       and
             rsign = 'A'        and
             relat = '002'      and
             begda <= sy-datum and
             endda >= sy-datum and
             infty = '1001'     and
             sclas = 'S'.
      if sy-subrc = 0.
      if the relationship with a chief position exist gets the chief user id
        clear V_US_SOBID_CH.
        select single sobid into V_US_SOBID_CH from HRP1001
         where otype = 'S'            and
               objid = V_POS_SOBID_CH and
               plvar = '01'           and
               rsign = 'A'            and
               relat = '008'          and
               begda <= sy-datum      and
               endda >= sy-datum      and
               infty = '1001'         and
               sclas = 'US'.
        IF sy-subrc = 0.
          clear pt_actor.
          refresh pt_actor.
          pt_actor-otype = 'US'.
          pt_actor-objid = V_US_SOBID_CH.
          append pt_actor.
        endif.
      endif.
    endif.
endif.
***************End of Z GET MANAGER.*****************************

WSDL for Provided Web Service does not resolve in IE

Hi,
After successfully providing a Web Service in FSCM 9/PT 8.49, I copied the generated WSDL URL in IE I was unable to view the WSDL. In-fact I cannot view any of the OOB WSDL's using the URL which PS generates after successfully posting it to the WSDL repository.
Any thoughts Please.
Thank You
Prashant

Hi Nicolas,
The URL that i am currently using is "http://localhost:8280/PSIGW/PeopleSoftServiceListeningConnector/SALES_ORDER_LOAD.1.wsdl
And when I paste this in IE I get the following response...
<![CDATA[ Unable to find a Routing corresponding to the incoming request message. ]]>
Status Code 20 & MessageID - 505 ... I could not paste the actual SOAP Fault message, as the Rich Text format was not resolving it correctly...
And on the Web Server window it says "[Fatal Error] :1:1: Content is not allowed in prolog.
I did lookup this particular error message for Weblogic and what I could make out is that the XML doc being provided has additional BOM Objects which need to stripped..
Below is the snippet from the +<strong
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
com.peoplesoft.pt.integrationgateway.common.GeneralFrameworkException
at com.peoplesoft.pt.integrationgateway.listeningconnector.PeopleSoftServiceListeningConnector.service(PeopleSoftServiceListeningConnector.java:361)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.peoplesoft.pt.integrationgateway.common.IBFilter.doFilter(IBFilter.java:69)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3212)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1983)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1890)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1344)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Message-ID: <5852381.1229014948625.JavaMail.CipherXP@cipher-b194ccb8>
Date: Thu, 11 Dec 2008 22:32:28 +0530 (IST)
Mime-Version: 1.0
Content-Type: multipart/related;
boundary="----=_Part_40_130942.1229014948609"
Content-ID: PeopleSoft-Integration-Broker-Internal-Mime-Message
PeopleSoft-ToolsRelease: 8.48
------=_Part_40_130942.1229014948609
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Content-Disposition: inline
Content-ID: IBInfo
<?xml version="1.0"?><IBInfo><ExternalOperationName><![CDATA[GetWSDL]]></ExternalOperationName><HttpSession><SessionID><![CDATA[]]></SessionID></HttpSession><From><WSA-ReplyTo><![CDATA[]]></WSA-ReplyTo><WSA-MessageID><![CDATA[]]></WSA-MessageID></From><QStrArgs><QStrArg><Name><![CDATA[wsdl]]></Name><Value><![CDATA[SALES_ORDER_LOAD.1]]></Value></QStrArg></QStrArgs><ContentSections><ContentSection><ID>ContentSection0</ID><NonRepudiation>N</NonRepudiation><Headers><Accept><![CDATA[image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/xaml+xml, application/vnd.ms-xpsdocument, application/x-ms-xbap, application/x-ms-application, application/x-shockwave-flash, */*]]></Accept><Accept-Language><![CDATA[en-us]]></Accept-Language><UA-CPU><![CDATA[x86]]></UA-CPU><Accept-Encoding><![CDATA[gzip, deflate]]></Accept-Encoding><User-Agent><![CDATA[Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022)]]></User-Agent><Host><![CDATA[localhost:8280]]></Host><Connection><![CDATA[Keep-Alive]]></Connection></Headers></ContentSection></ContentSections><IBProfileInformation><AppServer><TransformInbound>0</TransformInbound><OnRoutePeopleCode>0</OnRoutePeopleCode><OnRequestPeopleCode>0</OnRequestPeopleCode><TransformOutbound>0</TransformOutbound><DataBase>0</DataBase><AppServerSendTime>0</AppServerSendTime><AppServerRecvTime>0</AppServerRecvTime></AppServer><GatewayRequest><Connector>0</Connector><Transform>0</Transform><GatewayTime>0</GatewayTime></GatewayRequest><GatewayResponse><Transform>0</Transform><GatewayTime>0</GatewayTime></GatewayResponse></IBProfileInformation><AttachmentSection ResponseAsAttachment="N"></AttachmentSection></IBInfo>
------=_Part_40_130942.1229014948609
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Content-Disposition: inline
Content-ID: ContentSection0
<?xml version="1.0"?>
------=_Part_40_130942.1229014948609--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Message-ID: <12927846.1229014948625.JavaMail.CipherXP@cipher-b194ccb8>
Date: Thu, 11 Dec 2008 22:32:28 +0530 (IST)
Mime-Version: 1.0
Content-Type: multipart/related; boundary="Integration_Server_MIME_Boundary"
Content-ID: PeopleSoft-Integration-Broker-Internal-Mime-Message
PeopleSoft-ToolsRelease: 8.48
--Integration_Server_MIME_Boundary
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Content-Disposition: inline
Content-ID: IBInfo
<?xml version="1.0"?><IBInfo><Status><StatusCode>20</StatusCode><MsgSet>158</MsgSet><MsgID>505</MsgID><DefaultMsg>Unable to find a Routing corresponding to the incoming request message.</DefaultMsg></Status><AttachmentSection ResponseAsAttachment="N"></AttachmentSection></IBInfo>
Integration_Server_MIME_Boundary
Thank You for your help
Prashant

Depreciation posting rules are not defined for area 00 in Company Code.

Dear expert,
Would like to seek for advice why the SAP report trigger this error and what could be cause this error is promt out.
Please advice.
Many thanks
KH

Dear:
This error appears when system does not find the rules that how to post deprecation. Please check whether you have defined dep posting rules in OAYR for your depreciation area in co code . It determines that how your depreciation will be calculated , monthly , by monthly , yearly e.t.c. Hope it will resolve your query.
Regards

What is this message: Base Line Date for rule 11 not set ?

Hello all,
I am doing some test.
Cenario:
I need to create a Scheduling Agreement in transaction: VA41
The material I am using to create the VA41, I have just created.
I created in MM01 the views: Basic Datas 1 and 2, Sales View 1,2 and 3 and Account View 1.
Issue:
When I am creating the VA41 and I enter the material, the system shows the messages:
1) Dates from:: Base line date for rule 11 not set
2) Dates from:: Base line date for rule 9 not set
*obs: the messages dos not block the creation of VA41. It is a information message.
Question:
What that means? What will happen if I do not fix that? What should I do in order to not have more these messages?
Tks & Rgds,
Barbara
Message was edited by:
Barbara Barbos

Hi
Please check whether you have assigned - payment terms both at company code and sales area level
VVR

Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them eithe

Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them either failing or not sending at all. Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?

Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced.

Rule based ATP is not working for Components

Hi All,
Our requirement is to do availability check through APO for Sales order created in ECC,so we are using gATP.
Requirement: We are creating salesorder for BOM header (Sales BOM) and avaialbility check should happen for components i.e. Product avalaibility & Rule based substitution.
Issue: Product availiabilty is working for components but rules based substituion is working, mean Rules are not getting determind for components.
Settings:
- Header doesnot exist in APO and compnents do exist in APO
- Availability check is not enabled for header item category and enabled for Item category for components
- Rules have been created for Components in APO
- Rule base ATP is activated in Check instructions
We have also tried MATP for this i.e. PPM created in APO but still didn't get the desired result.
If we create salesorder for the component material directly then Rule based ATP is happening, so for components Rule based ATP is not working.
How do we enable enable Rulesbased ATP for components, i mean is there any different way to do the same.
Thanks for help.
Regards,
Jagadeesh

Hi Jagdeesh,
If you are creating BOM in ECC and CIFing PPM of FG/Header material to APO, I think you need to CIF Header material, too, with material integration model.
Please include header material in you integration models for material, SO and ATP check as well.
For component availability check, you can use MATP; but for MATP, FG should be in APO. You need not to CIF any receipts of FG (stock, planned orders, POs etc), so that MATP will be triggered directly. Then maintaining Rules for RMs will enable to select available RMs according to the rule created.
Regards,
Bipin

HT201272 A few songs from my old purchase is not available for download. It shows as purchased but I can't download it. Please help me resolve this problem, what do I need to do to enable download for all my purchased songs/movies etc. - Avinash

Hi,
A few songs from my old purchase is not available for download. It shows as purchased but I can't download it. Please help me resolve this problem, what do I need to do to enable download for all my purchased songs/movies etc.
- Avinash

The purchases are probably hidden:
http://support.apple.com/kb/ht4919

Agent not resolved for rule 168(US Manger)

Similar Messages

Maybe you are looking for