Agent ok but host not available

Hello All,
I've reconfigured my agent by following article 413228.1, i.e. clearstate agent, and cleaning up the files before restarting. My agent is now up and running but i do not see the host on which the agent is running. I've tried everything and can only think of uninstalling and reinstalling the agent.
I can see my databases on that host but i can't not see the host as a target. Has anyone experienced this? In other words, i can't to a refresh host..I can run upload agent fine from the server.
Thanks.

Yes host was viewable to OMS..weird thing is that it was known to OMS as a different name. For instance, the hostname is hostA but in OMS, it used to be known as hostB. There was a hosts file entry with hostB= IP address of host A. This was put in place so that the application can work.
Since then, we've cleaned up the hosts file but the hostB entry remains! Where does OMS get the machine name of the server from? I've looked everywhere in the config files and all have the entry hostA not hostB.

Similar Messages

How do I get video from my iPhone to iMovie? The videos download to iPhoto, but are not "available" in iMovie when I select iPhoto in event library.

How do I get video from my iPhone to iMovie? The videos download to iPhoto, but are not "available" in iMovie when I select iPhoto in event library.

I haven't launched iMovie in a while, and I've used iPhoto to import many videos from my iPhone's Camera Roll since the last time I launched and used iMovie.
iMovie prompted me to create/update the thumbnails for my iPhoto videos, along with indicating no iPhoto videos will be available with iMovie until this is completed.
Not sure how to do this manually, but this may be your problem.

I have aperture 3.4.5 but si not available the uograde at 3.5 and i can't open my library after the update to' maverick

I have aperture 3.4.5 but si not available the uograde at 3.5 and i can't open my library after the update to' maverick

Marco,
is your main system language set to English? If not, change the language to English in the "Language&Region" System Preferences (see: Re: I bought Aperture in a box et can't upgrade from 3.4.5 to 3.5.). Then sign back into AppStore and reload the Updates panel.
Other things that could prevent the update are, if you moved Aperture from the Applications folder or renamed it. Then put it back.
Léonie

My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available, what should I do?

My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available (3014), what should I do?

Try -
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
3014
Restoration of code 3014 will not work?: Apple Support Communities

Bought music in store but says not available in music list, I see it but can not play it

What is going on? Home sharing is on, a lot of music has titles that I previously bought in istore, yet the music is not available to play... What am I doing wrong? I am on Yosemite and have the latest version of IOS and apps and what more one can need...

https://dl-web.dropbox.com/get/Screenshots/Screenshot%202015-03-24%2015.46.40.pn g?_subject_uid=15410267&w=AADONHNfgxfk9X…
is where you can see a screendump of the problem

I want to buy an i pad with wifi and 4G in Hong Kong but 4G not available yet. Why is this?

Do you need 4G in Hong Kong and how come its not available yet. Will it work with the mobile services available here? Does anyone have any info on this?

This 4G business (Like anything else), is being hyped like crazy. In the UK we do not have proper 4G yet , however the new iPad works just fine on 3G. Think of it this way the faster you download data the quicker yo'll get through your quota of data. Even if 4G was available now I could bet bet you the tariffs wouldn't change much, making it very expensive. Personally as yet, I couldnt give a monkies about 4G as we have so many free Wifi spot here.. And I know you do in Hong Kong too as I was living out there last year!
Hong Kong tip: try the burger bars, coffee shops and shopping malls for free wifi. In addition HK telecoms companies usually offer free wifi for at least 60 days before you are committed to a contract (something I've not seen in UK)!

Agent Up and Running, uploading, but host not discovered

We recently rebooted one node in a two node RAC. When it came up we were having problems getting information in Enterprise manager. The agent comes up, uploads successfully and everything seem fine, but no updates in EM. We removed the host and all associated targets and tried reconfiguring and now EM cannot discover the host. It sees the agent, but not the host. What could have possibly gone wrong? This was all working fine before the reboot.
Agent Version : 10.1.0.5.1
OMS Version : 10.2.0.5.0
Protocol Version : 10.1.0.2.0
Database version is 10.1.0.3
Running on Red Hat Linux Itanium 3.2.3-47
Targets.xml is empty now on this node.
Edited by: user8720546 on Mar 17, 2010 2:55 PM

Hi Erika,
still agent is not discovering by the host. Please find the details command output. During agent upload i am getting error.
bash-3.2$ ./agentca -d
Stopping the agent using /opt/oracle/OracleHomes/agent10g/bin/emctl stop agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Stopping agent ... stopped.
Running agentca using /opt/oracle/OracleHomes/agent10g/oui/bin/runConfig.sh ORACLE_HOME=/opt/oracle/OracleHomes/agent10g ACTION=Configure MODE=Perform RESPONSE_FILE=/opt/oracle/OracleHomes/agent10g/response_file RERUN=TRUE INV_PTR_LOC=/opt/oracle/OracleHomes/agent10g/oraInst.loc COMPONENT_XML={oracle.sysman.top.agent.10_2_0_1_0.xml}
Perform - mode is starting for action: Configure
Perform - mode finished for action: Configure
You can see the log file: /opt/oracle/OracleHomes/agent10g/cfgtoollogs/oui/configActions2010-03-23_01-50-58-PM.log
bash-3.2$ ./emctl clearstate agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD clearstate completed successfully
bash-3.2$ ./emctl upload agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
bash-3.2$ ./emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.5.0
Protocol Version : 10.2.0.5.0
Agent Home : /opt/oracle/OracleHomes/agent10g
Agent binaries : /opt/oracle/OracleHomes/agent10g
Agent Process ID : 6598
Parent Process ID : 6582
Agent URL : https://kanlddev6201a.us.oracle.com:3872/emd/main/
Repository URL : https://idcovms1c.idc.oracle.com:1159/em/upload
Started at : 2010-03-23 13:52:14
Started by user : bpatra
Last Reload : 2010-03-23 13:52:14
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 342
Size of XML files pending upload(MB) : 40.36
Available disk space on upload filesystem : 31.31%
Last attempted heartbeat to OMS : 2010-03-23 13:53:29
Last successful heartbeat to OMS : unknown
Agent is Running and Ready

Bluetooth headset pairs, but is not available as playback device

Hi there
I am trying to pair and use my MEElectronics Runaway bluetooth stereo headset (with microphone) with my Zbook. I am following the instructions at MEElectronics available here http://www.meelec.com/Articles.asp?ID=352#ytplayer
I make the device discoverable and am able to pair the devices.
I select the device in Windows and it says 'connecting to device' then 'configuring device'. Then
'This device has been successfully added to this computer. Windows is now checking for drivers and will install them if necessary. You may need to wait for this to finish before your device is ready to use. To verify if this device finished installing properly, look for it in Devices and Printers.'
I click on Devices and Printers, and find the Air-Fi Runaway.
I click on volume system icon to select it as a playback device, but it is not listed there.
How do I guarantee that Windows actually downloads and installs the drivers to make this work? It doesn't appear to be doing so automatically as per what happened above.
Thanks in advance for any assistance you can provide.
Tronica

hello,
the reason the driver is not installed is because there is no windows 7/8 64bit driver available .
I have the same problem with another kind of headphones, soundpeats qy7 .
I keep searching and hoping that maybe a driver will be completed and published .

External display has 1440x900 resolution but is not available

I've replaced my external display with a 19" LG widescreen (VGA) which claims to have a 1440 x 900 resolution available. However it does not come up as a possible resolution in the display prefs. LG couldn't shed any light on the matter saying it was down to the drivers and that 1440 x 900 was available in this model. I bought it specifically because the resolution matches the laptop screen.. anyone help?

Hi Andrew,
what was the resolution of your former external display ?
Maybe the parameter of your formal display are interfering with your the ones for your new LG.
Try a PRAM reset according to this article: http://docs.info.apple.com/article.html?artnum=2238
Since Display and video settings such as refresh rate, screen resolution, number of colors are stored in the PRAM, maybe it helps.
Make sure that the new display is not connected when doing the reset.
regards
Stefan

I pods that have synced with my account and want them off , but there not available to do it on the I pod , there using my Apple ID to use my number to receive my emails and message

How to delete other devices off my account , but the devices are not present

Change your Apple ID password, & that will put an end to this.

After downloading Yosemite Installation got stuck as the disk needs repair but is not available.

Now I can't access my Time machine and it has not backed up since 3 months. I am stuck as i don't know how to get back to my old OS and basically ignore the Yosemite download until I figure out what is wrong with my SSD. I successfully replaced the HDD several months ago with a Crucial 240GB SSD and had no issues at all while working on it. However, now I seem to be completely stuck: can't get back to 10.9, can't back up to my Time Machine, can't even erase the disk and lose 3 months of data because of some disc mounting issue. What a mess I have created. Please help.

Ok everyone,
I may have a solution. I too installed Yosemite only to be stuck with nowhere to go because I couldn't repair my disk in the Disk Utility. I would verify over and over and sometimes I could click repair and sometimes it was grayed out. I would get red messages saying you can't unmout the disk, you can't repair it, etc. So, I read on another forum some chick used her CD of snow leopard and reinstalled that OS versus trying to install Mavericks again (which I tried too, but the disk was locked because it wasn't repaired). So I popped in the CD, restarted my computer and pulled up disk utility again. The first time I ran the repair function I actually got a kernel message (which is bad) and had to restart again. The second time, however, I ran the repair and it fixed it! I got a nice green message saying the disk had no issues appeared to be ok. So, I went to reinstall snow leopard and my Macintosh disk was no longer locked because it was repaired! I just installed it and I'm waiting for my computer to reboot so cross your fingers that this works.
I feel like this is good news because it makes me think that I don't actually have a hard drive issue but rather Yosemite was corrupted. I take very good care of my iMac so it would be heartbreaking if I had to put money into it when I've never had issues with my apple products In the past. Hope this helps anyone in the struggle. I'm not smart enough to hook up external hard drives and run programs or type code into the terminal. So consider this the simple man's resolution (I'm a woman). Feel free to ask me any questions, I'll check back when I can.

May Be Old question but undo not available in Acrobat X Standard

This maybe a tired old question but I can not find a straight forward answer. In Acrobat X standard, I have some large pdf's that I created by merging many smaller PDF files together that were MS Word files converted to PDF. When I want to update something I go back to the orginal Word Doc and edit, resave as pdf then I replace the page with the new PDF. Once in a blue moon I screw up and replace the wrong PDF page (it happens). But lo and behold no UNDO, I don't get it, in Acrobat 9 it worked but I had the professional version of that. I had not saved the file or anything, so why no undo? Is it because I have the standard version?
If I edit the PDF file with the text editor then the undo function lights up but I would think something as simple as a page replacement should be able to undo as long as you have not saved it?

If the plug-in is not even loaded, chances are that something goes wrong
when the OS tries to link the plug-in to dynamic libraries. Verify that you
have all the libraries installed that are required to run the plug-in.
Karl Heinz Kremer
PDF Acrobatics Without a Net
PDF Software Development, Training and More...
[email protected]
http://www.khkonsulting.com

Agent running but host unavailable in grid control

hi,
well yet another question, am having a bad day with grid control.
I have pushed an agent out to server xxx and the agent is now monitored through grid control however, the host remains unavailable. I have done agentca -d and -f, the agent is secure. Can anyone help out?
rgds
Alan

hi,
yes emctl status show everything is fine. Other targets have shown up in GC successfully.
At present I cannot find an emoms.trc file. I will post back if I can work out where it is.
rgds
Alan

TS2734 iPhone stolen but location not available for 24 hours?

I had my iphone stolen. It was immediately turned off. Since then it has come back online 3 times. The 1st 2 times I was able to see the location. The 3rd time I got e-mail saying that it was online and that the location would be available for 24 hrs. It's only been 12 hrs but I can't see the location. How do I see the location?

Hi,
I would report this to the police and they will help you track down your MacBook Pro and catch the theft.
They will know what to do.
I would go to http://icloud.com to view the location of your laptop.
Hope this helps.

Why do some songs show as matched but are not available for download?

I have just run iTunes match for the first time. The songs I can download are impressive. However, some of my songs do not have the cloud and download symbol next to them but when you look at the iCloud status it says they are matched. How can this be if I can't download them?
Barry

I have the same issue. I'm using iTunes the latest version (11.0.2.26). I uploaded my songs from my external hard drive and then matched them via iTunes Match. The iCloud Status says "Matched" but I can't download the songs to my harddrive. But there are others that will allow me to download Matched songs. I attached a screenshot of my iTunes.

Agent ok but host not available

Similar Messages

Maybe you are looking for