Agent problem RAC
Hi
Win2003 EEx64 10gR2 (RAC)
On RAC1 every think works fine but on rac2.....
D:\oracle\product\db\BIN>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://rac1:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleKA
LOBR2 service is starting..............
The OracleDBConsoleKALOBR2 service was started successfully.
emagent.trc
2008-08-22 13:59:18 Thread-5592 WARN command: Job Subsystem Timeout set at 600 seconds
2008-08-22 13:59:18 Thread-5592 WARN upload: Upload manager has no Failure script: disabled
2008-08-22 13:59:18 Thread-5592 WARN upload: Recovering left over xml files in upload directory
2008-08-22 13:59:18 Thread-5592 WARN upload: Recovered 0 left over xml files in upload directory
2008-08-22 13:59:18 Thread-5592 WARN upload: Merging leftover data file named mgmt_ha_mttr.dat
2008-08-22 13:59:18 Thread-5592 WARN upload: Merging leftover data file named rawdata.dat
2008-08-22 13:59:18 Thread-5592 WARN metadata: Metric collectSnapshot does not have any data columns
2008-08-22 13:59:18 Thread-5592 WARN metadata: Metric Disk_Path does not have any data columns
2008-08-22 13:59:18 Thread-5592 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2008-08-22 13:59:25 Thread-1528 WARN TargetManager: Query returned 0 rows (only one expected) for the dynamic property DGPrimaryDBName
2008-08-22 13:59:25 Thread-1528 WARN TargetManager: The execution of the query for DGPrimaryDBName in {KALOBR, rac_database} is missing the following required property values : DGPrimaryDBName
2008-08-22 13:59:28 Thread-5344 ERROR upload: Error in uploadXMLFiles. Trying again in 60,00 seconds.
2008-08-22 13:59:39 Thread-5500 WARN vpxoci: OCI Error -- ErrorCode(13900): ORA-13900: niepoprawny lub brakujący parametr warning value
ORA-06512: przy "SYS.DBMS_SERVER_ALERT", linia 4
ORA-06512: przy linia 1
SQL = "/* OracleOEM */ BEGIN dbms_server_alert.set_threshold(:metrics_id, "...
LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=rac2-vip)(PORT=1521))(CONNECT_DATA=(SID=KALOBR2)))
2008-08-22 13:59:39 Thread-5500 ERROR recvlets.aq: Error setting threshold of rac_global_cache.cr_request_cs: ORA-13900: niepoprawny lub brakujący parametr warning value
ORA-06512: przy "SYS.DBMS_SERVER_ALERT", linia 4
ORA-06512: przy linia 1
2008-08-22 13:59:39 Thread-5500 WARN vpxoci: OCI Error -- ErrorCode(13900): ORA-13900: niepoprawny lub brakujący parametr warning value
ORA-06512: przy "SYS.DBMS_SERVER_ALERT", linia 4
ORA-06512: przy linia 1
SQL = "/* OracleOEM */ BEGIN dbms_server_alert.set_threshold(:metrics_id, "...
LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=rac2-vip)(PORT=1521))(CONNECT_DATA=(SID=KALOBR2)))
2008-08-22 13:59:39 Thread-5500 ERROR recvlets.aq: Error setting threshold of rac_global_cache.currentgets_cs: ORA-13900: niepoprawny lub brakujący parametr warning value
ORA-06512: przy "SYS.DBMS_SERVER_ALERT", linia 4
ORA-06512: przy linia 1
On homepage instance2 (KALOBR2) I see
Database Instance
Status Open
Host rac2-vip
Port 1521
SID KALOBR2
Oracle Home D:\oracle\product\db
Details The instance is open.
Listener
Status Up
Host rac2-vip
Port 1521
Name LISTENER_RAC2
Oracle Home D:\oracle\product\db
Location D:\oracle\product\db\network\admin
Agent Connection to Instance
Status
Unavailable
Details
General
Status Up
Up Since 2008-07-07 08:39:39 CEST
Instance Name kalobr2
Version 10.2.0.3.0
Host rac2
Listener LISTENER_RAC2_rac2
ASM +ASM2_rac2
Thanks in advice!
I try remove this instance from repository using..
emca -deleteInst db....
2008-08-24 12:58:09 oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-deleteInst' set to true
2008-08-24 12:58:09 oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
2008-08-24 12:58:09 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: ORACLE_HOME value: D:\oracle\product\db
2008-08-24 12:58:09 oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-cluster' set to true
2008-08-24 12:58:12 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: MODIFY_NODE value: RAC2
2008-08-24 12:58:15 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: KALOBR
2008-08-24 12:58:36 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: MODIFY_SID value: KALOBR2
2008-08-24 12:58:36 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CONFIRMATION ANSWER value:
2008-08-24 12:58:37 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CONFIRMATION ANSWER value: yes
2008-08-24 12:58:37 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LOG_FILE.
2008-08-24 12:58:38 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\db\cfgtoollogs\emca\KALOBR\KALOBR2\emca_2008-08-24_12-58-09-PM.log.
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter NODE_LIST.
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager getInaccessibleNodeList
CONFIG: Invalid Node/Sid List specified.
2008-08-24 12:58:38 oracle.sysman.emcp.util.ClusterUtil areNodesAlive
CONFIG: Alive node cache contents: []
2008-08-24 12:58:38 oracle.sysman.emcp.util.ClusterUtil areNodesAlive
CONFIG: RAC1 not found in alive node cache
2008-08-24 12:58:38 oracle.sysman.emcp.util.ClusterUtil areNodesAlive
CONFIG: RAC2 not found in alive node cache
2008-08-24 12:58:38 oracle.sysman.emcp.util.ClusterUtil areNodesAlive
CONFIG: Node: RAC1 is accessible.
2008-08-24 12:58:38 oracle.sysman.emcp.util.ClusterUtil areNodesAlive
CONFIG: Node: RAC2 is accessible.
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager getInaccessibleNodeList
CONFIG: All nodes are up. Nodes: [RAC1, RAC2]
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager getInaccessibleSidList
CONFIG: All nodes are up. Nodes: [RAC1, RAC2] Sids: [KALOBR1, KALOBR2]
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SID_LIST value: KALOBR1,KALOBR2
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: NODE_LIST value: RAC1,RAC2
2008-08-24 12:58:38 oracle.sysman.emcp.util.ClusterUtil isShared
CONFIG: path: D:\oracle\product\db isOracleHome: true isShared: false
2008-08-24 12:58:38 oracle.sysman.emcp.util.ClusterUtil isShared
CONFIG: Path Cache contents: {D:\oracle\product\db=false}
2008-08-24 12:58:38 oracle.sysman.emcp.util.ClusterUtil isShared
CONFIG: OH Cache contents: {D:\oracle\product\db=false}
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SRC_OH.
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: EM_HOME value: D:\oracle\product\db
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: KALOBR
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-cluster' set to true
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'MULTIPLE_RAC_INSTANCES' set to false
2008-08-24 12:58:38 oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: true. Calling getLocalNode
2008-08-24 12:58:38 oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: rac1
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
2008-08-24 12:58:38 oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: rac1
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
2008-08-24 12:58:38 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
2008-08-24 12:58:38 oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
2008-08-24 12:58:38 oracle.sysman.emcp.EMConfig perform
SEVERE: Database instance unavailable.
Refer to the log file at D:\oracle\product\db\cfgtoollogs\emca\KALOBR\KALOBR2\emca_2008-08-24_12-58-09-PM.log for more details.
2008-08-24 12:58:38 oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Database instance unavailable.
at oracle.sysman.emcp.EMDBPreConfig.checkGlobalDbUniqueName(EMDBPreConfig.java:1166)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:200)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:168)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:485)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1141)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:469)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:418)
Similar Messages
-
Looking for best practice / installation guide for grid agent for RAC
I am looking for best practice / installation guide for grid agent for RAC, running on windows server.
Thanks.Please refer :
MOS note Id : [ID 378037.1] -- How To Install Oracle 10g Grid Agent On RAC
http://repettas.wordpress.com/2007/10/21/how-to-install-oracle-10g-grid-agent-on-rac/
Regards
Rajesh -
InterMedia Web Agent problems...
I have Oracle 8.1.5 and OAS 4.0.8 on an NT machine. I have installed interMedia Web Agent, having shut the OAS services down first, configured the application as described in the doc and restarted all services. I have one listener for OAS on port 90. When I try to access http://servername:90/intermedia/~admin I get a 'Page cannot be displayed' error. Why?
I have checked all the settings within OAS and they look fine. NT is running SP5. I can access http://servername:90/ fine.
Any help gratefully received!
LeeThe interMedia web agent is installed in the
OAS home and you can see the intermedia application and cartridge in the OAS admin page?
Have you checked the OAS wrb.log file? That is where errors should be displayed. If it is a web agent problem, check <windows_dir>wsclstch.err or log files in <OAS_HOME>/ord/web/logs.
What do they say about starting the agent?
Test the agent with http://host:port/intermedia/~test
Larry -
EXCISE AND COMMISION AGENT PROBLEM
HI GURUS,
Presently we implementing SAP R3 in 1 Textile industry, All the customization is been completed. But we are facing a problem related to excise calculation.
1.The system is showing the excise value in general Invoice (output type RD00) but it is not showing in Excise Invoice (Output Type J1IN)
2.Automatic posting is not happening after general Invoice (RD00).
3. We have scenario of commission agent. we have created a account group as Commission and Partner function CM for Commission and CI for commission receipt at header level of sales document. Also a condition type ZCMN as account key & ZCMU as accrual key. also maintained gl account for same. while creating the Sales order we assign CM as a partner function and No. of commission agent at header level . and value for condition ZCMN eg. 1%. We have also maintained seperate account assignment group 04 for Commission agent and 01 for Sundry Debetor (customer account).
After releasing for accounting the acount details appears as follows:
70 (customer No) 50000- Cr
1500233 Revenue account 50000 Dr
160064 Provision accout - 500- cr
124656 Brokarage account - 500 dr
the system is not determining the commission agent's account as it is determining for customer. Which we have already maintained in VKOA account assignment 01 for customer and 04 for commission agent as mentioned above.
Kindly go through these issues and revert back with possible suggestions at your earliest.Hi,
Please go through the link below, hope this help.
http://www.sap-img.com/sap-sd/steps-to-create-commission-for-agent.htm -
Agent problem in Payment Release Workflow - SPRO
Hi FI PRof's,
I am using the standard workflow WS00400012 for Payment Release.I am using two level approval process.If the invoice amount is less than 20,000 it should goto approver X and if it more than that it should do for X first and then to Y.
I have assigned the agents in SPRO Customizing as follows :
WF Variant - 2000 Approval path - 0001 Level - 1 R.Amt - 10,000 Agent - X
WF Variant - 2000 Approval path - 0001 Level - 2 R.Amt - 999999... Agent - Y
I am using the standard rule 00400125 for agent asssignment.
My Problem for single level release the agent is found(X) and WF is fine.
But while two level release the responsible agent is not found..What could be the problem. Am I missing any thing in Customization.
RgdsHi,
You had any response about this problem or able to solve it?
I'm having the same current problems and have not found a solution!
Regards!
Ariel Prebianca -
Agent problem in Payment Release Workflow
Hi WF PRof's,
I am using the standard workflow WS00400012 for Payment Release.I am using two level approval process.If the invoice amount is less than 20,000 it should goto approver X and if it more than that it should do for X first and then to Y.
I have assigned the agents in SPRO Customizing as follows :
WF Variant - 2000 Approval path - 0001 Level - 1 R.Amt - 10,000 Agent - X
WF Variant - 2000 Approval path - 0001 Level - 2 R.Amt - 999999... Agent - Y
I am using the standard rule 00400125 for agent asssignment.
My Problem for single level release the agent is found(X) and WF is fine.
But while two level release the responsible agent is not found..What could be the problem. Am I missing any thing in Customization.
RgdsI can't check it since I don't have access to a SAP system here, but don't you have to define the first-level approvers separately for the two scenarios? Perhaps my memory is incorrect, but I seem to remember that you can have one first-level approver for the low amounts, and a different first-level approver for the high amounts.
This is mostly a chore that just requires additional maintenance since it seems "everyone" is using the same first-level approver independent of amount, but flexibility is highly regarded in SAP... -
hi, I am running IHA on my Windows Vista Ultimate x64 system & I keep periodiatly getting an error box being displayed with the following info:
Script: C:\Program Files(x86)\Verizon\IHA_MessageCenter\CmdVBS.vbs
Line: 2
Char: 1
Error: Library not registered.
Code: 8002801D
Source: (null)
I need to know what to do to fix this re-occurring error!! I have tried calling the verizon Tech Support # to NO AVAIL!! can somebody help me with this problem??Sorry to hear about the In Home Agent troubles you are having. Have you uninstalled and reinstalled the program to try to fix this?
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan -
Another RMAN duplicate problem - RAC database to single instance
Hi,
I have a problem with the RMAN duplicate procedure and was hoping someone can help.
I would like to create a duplicate of our production RAC database on a separate, stand-alone, database server on another site. This duplicate will be used for intensive querying by another business unit who I don't want to have access to our production database.
My procedure goes like this:
1. Create a disk (not ASM) based backup of the datafiles and any archived redo logs:
"run {
allocate channel d1 type disk;
backup format '/u02/stage/df_t%t_s%s_p%p' database plus archivelog delete input;
release channel d1;
2. Tar and scp these files to the same location on the stand-alone database server.
3. In the meantime, work has been happening on the production database and further archived redo logs have been generated. I don't really care about these logs for the purposes of the duplicate however, I just want to duplicate to the point of the recent backup. To do this, I run the following SQL to determine the sequence number that I should be duplicating up to:
"select max(sequence#), thread# from v$archived_log where deleted='YES' group by thread#;"
4. Duplicate the production database to the stand-alone database (all the SQL Net stuff is working).
"run {
set until sequence (value returned by above SQL statement);
duplicate target database to XXX;
However, my problem arises because I don't know how to handle the fact that there are two threads. I understand that each thread relates to one of the RAC instances, I just don't know which one to specify for the duplicate. We have a database service which the client application connects through, and that service runs on on or other of the instances. Should I just care about the logs from the instance where the service is currently running?
Am I even approaching this is the correct way?
I look forward to any help that people may be able to offer.
Regards,
PhilHi Werner,
Thanks again for your help, there is still something wrong though. "list backup of archivelog all;" shows:
BS Key Size Device Type Elapsed Time Completion Time
3784 202.34M DISK 00:00:08 28-OCT-09
BP Key: 3784 Status: AVAILABLE Compressed: NO Tag: TAG20091028T111718
Piece Name: /u02/stage/df_t701435838_s3820_p1
List of Archived Logs in backup set 3784
Thrd Seq Low SCN Low Time Next SCN Next Time
1 9746 569095777 28-OCT-09 569150229 28-OCT-09
1 9747 569150229 28-OCT-09 569187892 28-OCT-09
1 9748 569187892 28-OCT-09 569231956 28-OCT-09
1 9749 569231956 28-OCT-09 569259816 28-OCT-09
2 7931 569095774 28-OCT-09 569187902 28-OCT-09
2 7932 569187902 28-OCT-09 569259814 28-OCT-09
BS Key Size Device Type Elapsed Time Completion Time
3787 1.04M DISK 00:00:02 28-OCT-09
BP Key: 3787 Status: AVAILABLE Compressed: NO Tag: TAG20091028T112222
Piece Name: /u02/stage/df_t701436142_s3823_p1
List of Archived Logs in backup set 3787
Thrd Seq Low SCN Low Time Next SCN Next Time
1 9750 569259816 28-OCT-09 569261110 28-OCT-09
2 7933 569259814 28-OCT-09 569261108 28-OCT-09
You can see that the highest sequence number is 9750 of thread 1, and that the Low and Next SCNs are 569259816 and 56926111. However, when I look at the output of the RMAN duplicate command:
contents of Memory Script:
set until scn 569505448;
recover
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 28-OCT-09
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=39 devtype=DISK
starting media recovery
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 4 needs more recovery to be consistent
ORA-01110: data file 4: '/u02/sca-standby/data/users.260.623418479'
RMAN-03002: failure of Duplicate Db command at 10/28/2009 16:12:55
RMAN-03015: error occurred in stored script Memory Script
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of log thread 2 seq 7936 lowscn 569411744 found to restore
RMAN-06025: no backup of log thread 2 seq 7935 lowscn 569321987 found to restore
RMAN-06025: no backup of log thread 2 seq 7934 lowscn 569261108 found to restore
RMAN-06025: no backup of log thread 1 seq 9758 lowscn 569471890 found to restore
RMAN-06025: no backup of log thread 1 seq 9757 lowscn 569440076 found to restore
RMAN-06025: no backup of log thread 1 seq 9756 lowscn 569411439 found to restore
RMAN-06025: no backup of log thread 1 seq 9755 lowscn 569378529 found to restore
RMAN-06025: no backup of log thread 1 seq 9754 lowscn 569358970 found to restore
RMAN-06025: no backup of log thread 1 seq 9753 lowscn 569321882 found to restore
RMAN-06025: no backup of log thread 1 seq 9752 lowscn 569284238 found to restore
RMAN-06025: no backup of log thread 1 seq 9751 lowscn 569261110 found to restore
you can see that something is setting the recovery SCN to 569505448 which higher even then any of the archived logs mentioned above. If I select current_scn from the production database, this gives me 569528258 which is closer to the value which RMAN is expecting to recover to than any of the archived redo logs.
Can you think what might be causing RMAN to try to recover to this value? and why does it appear to be ignoring the SET UNTIL SEQUENCE command?
Cheers,
Phil -
ORDERS96 to XML by Conversion Agent - Problem with XML output (corrupt)
Hi,
I try to convert an EDIFACT Orders 96A file to EDI-XML to use it in SAP PI. I worked like described in BLOG
SAP XI supports EDIFACT
When I test the scenario conversion in conversion agent it is successful - without any errors.
But im not able to open the output XML with my browser everytime there's the error "The XML page cannot be displayed" When I use WMHelp XMLPad it shows me not well formed (invalid token) but i can't see anything wrong so has someone an idea to solve this ?
Thanks
be sure points will awardedHi,
Please check the following links to resolve u r problem.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=316076&SiteID=1
http://linuxproblem.org/art_22.html
http://bugs.php.net/bug.php?id=34168
warm regards
mahesh. -
INTELLIGENT AGENT PROBLEM RECOVERY ON NT
제품 : ORACLE SERVER
작성날짜 : 1997-12-16
The Oracle Intelligent Agent 7.3.3 on NT is self-configuring and
requires TCP/IP fully configured on the NT system.
The Agent's startup algorithm:
When the agent is started, the startup process reads the LISTENER.ORA,
TNSNAMES.ORA and NT REGISTRY. It compares the values stored in each location.
If any discrepencies exist, the agent service will either not start
or service discovery will not occur.
Starting the Intelligent Agent:
1. Verify the Sqlnet configuration files are correct:
- All sid entries in the LISTENER.ORA must have valid TCP/IP service
descriptors defined in the TNSNAMES.ORA file.
- The TNSNAMES.ORA should not contain service descriptors for local
sides not defined in the LISTENER.ORA file.
- TCP/IP must be fully configured on the system.
2. NT 4.0: Click on START->SETTINGS->CONTROL PANEL->SERVICES.
Highlight the service ORACLEAGENT. Click on the START button.
NT 3.51: Find the MAIN program group.
Click on CONTROL PANEL->SERVICES.
Highlight the service ORACLEAGENT. Click on the START button.
***NOTE: If the 7.3.3 agent will not start, verify the OEM version
is not 1.4.
If the version is 1.4, install the 8.0.3 Intelligent Agent.
Agent troubleshooting tips:
1. Verify TCP/IP is configured correctly.
- At a dos prompt, type HOSTNAME.
This is the actual configured TCP/IP HOSTNAME of the system.
- Verify the hostname resolved by the agent. The DBSNMP.ADDRESS
parameter in the ORANT/network/snmp_rw.ora contains this
information.
If the file does not contain the actual hostname, TCP/IP is not
properly configured on the system or the network.
2. Correcting TCP/IP configuration problems:
- Edit the WINNT\system32\drivers\etc\hosts and lmhosts files.
(*NOTE: If these files have never been used, only sample files will
exist in the directory. Either rename or copy the .sam files
to just the file name with no extention.)
- Follow the example below (replace the information in brackets
with the actual host information for that system.):
HOSTS file:
<122.111.111.111> <hostname>
LMHOSTS file:
<122.111.111.111. <netbios name or hostname> #PRE
- Delete the ORANT\network\agent\*.q and SERVICES.ORA files.
(*NOTE: The *.q files hold information about jobs and events.
Do not delete these files without first removing all jobs
and events registered against this agent.)
- Delete the $ORACLE_HOME\network\admin\SNMP_RO.ORA and
SNMP_RW.ORA files.
- Restart the agent at a DOS prompt:
NET START ORACLEAGENT
3. Check the NT EVENT VIEWER->APPLICATIONS->LOG for any errors
starting the DBSNMP process.
4. Check the ORANT/NETWORK/LOG/NMICONF.LOG file for other possible
errors.
5. If using NTFS, check permissions to the \orant\network directory
structure.Angus (guest) wrote:
: I've spent most of today trawling through these messages
looking
: for information on getting the Intelligent Agent up and
running
: on Linux, RedHat 6.0.
: I am running 8.0.5 EE with the glibcpatch installed (hopefully
: correctly, as I cannot get the README file of the FTP site).
: Everything works, the Agent even starts (2 * dbsnmp processes)
: but I cannot discover the services on my box from an NT
machine
blah-blah
I've reverted to RedHat5.2 and RedHat 5.1's version of TCL.
Everything now runs as expected.
Angus.
null -
Server Intelligence Agent Problem xi 3.1 sp3
hi everyone
first of all i tried in Win7 & WinXP and Last Win2008 Server all of them same problem..
when i setup BO xi3.1 sp3 i can't see Server Intelligence Agent in Central Configuraiton Manager and i can't add in there as manually from ccm.exe
when i finished setup i look Server Management (in services.msc) But i couldn't see Server Intelligence Agent.
i use Windows Server 2008 ent.
Tomcat 5.5 & MySQL
in log files writes...
.\auditsubsystem_impl.cpp:1233: TraceLog message 1
2012/02/07 23:38:52.168|>>|A| | 1432|1332| |||||||||||||||assert failure: (.\auditsubsystem_impl.cpp:1233). (cuidToIdMap.Lookup( auditCUID, auditId ) : Auditor::CreateRecordsForServer - the AuditingService seems to be missing from this deployment.).
pls help me. i want work in SAPthe errors here i think...
12.02.2012, 05:27:46: "C:\Program Files\Business Objects\common\4.0\java\lib\InitInstall.bat"
Logging on to WIN2008:6400 as user Administrator with secEnterprise authentication...
com.businessobjects.sdk.biar.exception.XSDException$ImportParsingException: Import file parsing exception occurred : 'XSD file parsing exception occurred : 'The kind 'infoobject' does not exist in the CMS. (FWM 04030)' (FWM 04011)' (FWM 04009)
cause:com.businessobjects.sdk.biar.exception.XSDException$XSDParsingException: XSD file parsing exception occurred : 'The kind 'infoobject' does not exist in the CMS. (FWM 04030)' (FWM 04011)
cause:com.businessobjects.sdk.biar.exception.XSDException$UnknownKindException: The kind 'infoobject' does not exist in the CMS. (FWM 04030)
detail:XSD file parsing exception occurred : 'The kind 'infoobject' does not exist in the CMS. (FWM 04030)' (FWM 04011) The kind 'infoobject' does not exist in the CMS. (FWM 04030)
detail:Import file parsing exception occurred : 'XSD file parsing exception occurred : 'The kind 'infoobject' does not exist in the CMS. (FWM 04030)' (FWM 04011)' (FWM 04009) XSD file parsing exception occurred : 'The kind 'infoobject' does not exist in the CMS.
(FWM 04030)' (FWM 04011)
at com.businessobjects.sdk.biar.internal.ArchiveParser.parse(ArchiveParser.java:91)
at com.businessobjects.sdk.biar.internal.XMLImporter.doImportFromXML(XMLImporter.java:114)
at com.businessobjects.sdk.biar.internal.XMLImporter.importFromXML(XMLImporter.java:91)
at com.businessobjects.sdk.biar.internal.BiarEngine.importFromXML(BiarEngine.java:282)
at com.businessobjects.sdk.biar.internal.BiarEngine.importFromXML(BiarEngine.java:224)
at com.businessobjects.smartservers.BiarHelper.importXML(BiarHelper.java:506)
at com.businessobjects.smartservers.BiarHelper.importXML(BiarHelper.java:452)
at com.businessobjects.smartservers.InitInstall.importInstallObject(InitInstall.java:318)
at com.businessobjects.smartservers.InitInstall.run(InitInstall.java:146)
at com.businessobjects.smartservers.InitInstall.main(InitInstall.java:116)
Caused by: com.businessobjects.sdk.biar.exception.XSDException$XSDParsingException: XSD file parsing exception occurred : 'The kind 'infoobject' does not exist in the CMS. (FWM 04030)' (FWM 04011)
cause:com.businessobjects.sdk.biar.exception.XSDException$UnknownKindException: The kind 'infoobject' does not exist in the CMS. (FWM 04030)
detail:XSD file parsing exception occurred : 'The kind 'infoobject' does not exist in the CMS. (FWM 04030)' (FWM 04011) The kind 'infoobject' does not exist in the CMS. (FWM 04030)
at com.businessobjects.sdk.biar.internal.ArchiveParser$SAXHandler.startPrefixMapping(ArchiveParser.java:410)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startNamespaceMapping(AbstractSAXParser.java:2063)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:499)
at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(XMLNSDocumentScannerImpl.java:330)
at com.sun.org.apache.xerces.internal.impl.X
MLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(XMLNSDocumentScannerImpl.java:779)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1794)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:368)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:834)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:764)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1242)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
at com.businessobjects.sdk.biar.internal.ArchiveParser.parse(ArchiveParser.java:83)
... 9 more
Import file parsing exception occurred : 'XSD file parsing exception occurred : 'The kind 'inf
oobject' does not exist in the CMS. (FWM 04030)' (FWM 04011)' (FWM 04009)
Failed to import from biarfile: "Install_Install.xml"
MSI (s) (38:3C) [05:33:52:003]: Invoking remote custom action. DLL: C:\Windows\Installer\MSICB3C.tmp, Entrypoint: BOBJBiarFile
BOBJBiarFileDeferred.60F4A18A_ACCB_48F0_A673_017C6A585288: Server: WIN2008:6400, Database: CMS
Connecting to CMS WIN2008:6400 as Administrator
Setting IMPORT_CALL_PLUGINS to false
Exception: Server WIN2008:6400 not found or server may be down (FWM 01003)
Connection failed, retrying
Exception: Server WIN2008:6400 not found or server may be down (FWM 01003)
Connection failed, retrying
Exception: Server WIN2008:6400 not found or server may be down (FWM 01003)
Connection failed, retrying
Exception: Server WIN2008:6400 not found or server may be down (FWM 01003)
Connection failed, retrying
Exception: Server WIN2008:6400 not found or server may be down (FWM 01003)
Connection failed, retrying
Exception: Server WIN2008:6400 not found or server may be down (FWM 01003)
Connection failed, retrying
Exception: Server WIN2008:6400 not found or server may be down (FWM 01003)
Connection failed, retrying
Exception: Server WIN2008:6400 not found or server may be down (FWM 01003)
Connection failed, retrying
Exception: Server WIN2008:6400 not found or server may be down (FWM 01003)
Connection failed, retrying
Exception: Server WIN2008:6400 not found or server may be down (FWM 01003)
Connection failed, retrying
Could not connect to CMS -
I am trying to run the Microsoft AutoUpdate software, but I cant seem to get past this last final part.
tell application "Microsoft AutoUpdate"
activate
end tell
tell application "System Events"
tell process "AutoUpdate"
tell window "Microsoft AutoUpdate"
click button "Check for Updates"
end tell
end tell
end tell
delay 2
tell application "System Events"
tell process "AutoUpdate"
tell window "Microsoft AutoUpdate"
tell sheet "Updates Found"
click button "Install"
end tell
end tell
end tell
end tell
delay 1
set myusername to "username"
set mypassword to "password"
tell application "Finder"
frontmost
end tell
tell application "System Events"
tell process "SecurityAgent"
keystroke myusername
keystroke tab
keystroke mypassword
delay 5
end tell
end tell
For some reason it doesnt take all of the password for the variable mypassword. At first I thought it might be some of the strange characters in the password, but even that shouldnt have been a problem. So I exchanged the variables, and it wrote out the password in Name field. So it's not the variable, its something strange about the Password field in Security Agent that seems to only want to take part of the password.
Also I cant seem to get the click button "Ok" or keystroke return, to get me past the SecurityAgend dialog box.
Any help would be greatly appreciated, thanksHi Mac Is Life
From what I could see the problem was using keystroke tab instead of using keystroke return for the password area, the alterd script works fine for me here.
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">keystroke "user name"
--keystroke tab
keystroke return</pre>
<pre title="this text can be pasted into the Script Editor" style="font-family: Monaco, 'Courier New', Courier, monospace; font-size: 10px; padding: 5px; width: 720px; color: #000000; background-color: #E0E0E0; overflow: auto">tell application "Microsoft AutoUpdate"
activate
end tell
tell application "System Events"
tell process "AutoUpdate"
tell window "Microsoft AutoUpdate"
click button "Check for Updates"
end tell
end tell
end tell
delay 7
tell application "System Events"
tell process "AutoUpdate"
tell window "Microsoft AutoUpdate"
tell sheet "Updates Found"
click button "Install"
end tell
end tell
end tell
end tell
delay 1
--set myusername to "username"
--set mypassword to "password"
tell application "Finder"
frontmost
end tell
tell application "System Events"
--tell process "SecurityAgent"
keystroke "user name"
--keystroke tab
keystroke return
delay 0.5
keystroke "password"
delay 0.5
keystroke return
end tell
--end tell</pre>
Budgie -
Hi,
recently i am facing a probelm with NAC agent , it does not check for the updates when the user is login , there is a massege come ( please check the attchments ) .
please help me !!!Recently , when the user is loging off & loging on , the NAC agent proceed for checking again & again , this problem is
strain the user of every time his faceing this check & time waste .
what i know the NAC is proceed for check if the user is rebooting the machine , but for login & logoff !!!!!!!!.
there is any solution to prevent this issue . -
When i run a preview of a Rep Agent setting, I can see header info. When i go back and try to modify the header, by double clicking on the header page under Print Layout Tab, I dont see anything. What is going on??? I see this problem in every setting that i'm trying to modify.
Thanks
FranMoazam,
>
whenever im printing its giving downloading dialog box for that report job Id what should i do which i didnt get that download dialog box.
>
What is the report output format? Typically, if the format type has an associated application it should open automatically in the associated program (eg; pdf = Acrobat Reader, html = default browser). You might also have your browser configured to always download rather than open files. I don't recall the exact setting and it is different between browsers, but I know IE has a setting for this. You might want to check your browser settings...
and how can i get rid of the REP-52251 error prolbem always i have to restart my report service.As this issue is not completely related to your original post, it would be best to start a new thread. Can you please post the full error message as there are numerous possible causes of this error code. It could be Single Sign On (SSO); could be you have a Reports Server Cluster and you need to reference the specific server name in the cluster; just to name a few.
worked for me.
If someone's response is helpful or correct, please mark it accordingly.
Announcement: Forums Etiquette / Reward Points
Craig... -
Interlligent agent problem ,when start it.
when i start interlligent agent ,it is report that ????.lib has bad magic. how do make deal it.
thank in advanceHi,
I fixed the java.lang.NoClassDefFoundError problem in the Eclipse 3.1 Plug-in: in the Run > Environment, set the CLASSPATH variable to the directory containing the target program's package hierarchy. Now the Trace program runs ok when invoked from the plug-in.
However, when I repeated the same configuration in Eclipse 3.0.2, I got the following runtime error.
Unhandled event loop exception
Reason:
com/sun/jdi/connect/VMStartException
Isn't Eclipse 3.0.2 supposed to behave in the same way? Any help will be much appreciated!
Sunny
Maybe you are looking for
-
Can't Open Photoshop-saved RAW file in Photoshop...
I've just gotten back from my school's library, where I was using one of the scanners to scan my negatives. I scanned the files directly into photoshop CS3. In retrospect, I absolutely should have saved in tiff, which has worked before, but this time
-
Trouble Connecting G5 to Server on Company Network
We have 2 Networks that are connected via VPN between the firewalls. The G5 is connected to our network (#1) and is trying to connect to a server on the other Network (#2). There are a number of servers that it connect to already on the Network #2. W
-
i'm getting this error when i try to do the following 6502 = ORA-06502: PL/SQL: numeric or value error: character string buffer too small declare str1Query varchar2(32767); str2Query varchar2(32767); str3Query varchar2(32767); str31Query varchar2(327
-
When syncing my iphone all of the pictures on my computer are saved onto the phone as "Camera Albums" . As they are taking up too much space I want to delete them from the phone but don't see how to do this. Also, how do I prevent the pictures from
-
Hi, I need sample for MTOM support in ESB. Where to find the sample for MTOM support in ESB. Thanks in advance.