Agent stuck in the login state ..
Hi,
one of agent is stuck in the login state . We are using the UCCE setup version-8.5. when i was trying to kill this agent session through PG CMD line (using procmon -->>>resetas Agent ID ) its showing "Agent already logged out or pending log out. AgentID=41332752" , but after doing this that agent not able to login on any Ext. error "showing this agent is alrady loged on". Any one kindly help me to come out from this issue. We are using CTI toll kit for agent login.
Hi,
If you get this message error "showing this agent is alrady loged on" only for one Extension.
Then you can deassociate and associate the device in th PG user for that phone.
I hope the issue you are talkin about the AgentID not able to login to any of the extension.
Then check in the t_Agent_Real_Time table for this agent's current state and the extension.
Login using the agentID in that extension and logout.
Regards,
Senthil
Similar Messages
-
My sync group is stuck in the processing state
The database sync that we have configured has been working for months and suddenly stopped successfully running 1/19/2015 2:19 PM Pacific Time. We have the sync configured to automatically execute every 5 mins and I even tried to run it manually. The job
stays perpetually in a "Processing" state with no additional info (e.g. error, warning, etc).
Can anyone provide assistance? (e.g. reset the sync status, provide detailed logging as to the cause of the issues) What is the proper course of action? (e.g. reconfigure the sync service, etc) Please advise.
Here are the technical details of the instance:
STATUS
Processing
LAST SYNC
1/19/2015 2:19:25 PM
SYNC GROUP ID
e5c228ff-a8e8-4b99-85f8-504709e22908_West US
SUBSCRIPTION ID
4caa7e07-76e5-424d-8b4b-6f26cce36026
CONFLICT RESOLUTION
Hub WinsHi,
Thanks for posting here.
Any of the following can result in a sync group being stuck in the processing state.
a)The client agent is offline.
Be sure that the client agent is online then try again.
b)The client agent is uninstalled or missing.
Please check the above and try to sync again.
In the mean time we would check from our back-end. It may take more time than expected.
Girish Prajwal -
PEAP clients stuck in the 8021X_REQD state
Hi,
I've got complaining for lots of PEAP clients not connecting to wireless network. Everything was working fine before. I logged into WLC and found out these clients are associated but stuck in the 8021X_REQD state. I checked our Radius server and couldn't find the failed log. The below message shows the debug for a client 00:0b:6b:24:66:55 and the attachment is the client info shown on the WLC. Please help. Thanks.
(vau-cr-wlc4402-1) >debug client 00:0b:6b:24:66:55
(vau-cr-wlc4402-1) >Mon Aug 8 15:40:53 2011: 00:0b:6b:24:66:55 802.1x 'timeoutEvt' Timer expired for station 00:0b:6b:24:66:55
Mon Aug 8 15:40:53 2011: 00:0b:6b:24:66:55 Retransmit 1 of EAP-Request (length 127) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 Association received from mobile on AP 00:1c:57:8b:34:e0
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 STA - rates (8): 130 132 139 150 140 18 152 36 176 72 96 108 0 0 0 0
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 STA - rates (12): 130 132 139 150 140 18 152 36 176 72 96 108 0 0 0 0
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 Processing RSN IE type 48, length 20 for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 Received RSN IE with 0 PMKIDs from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Initializing policy
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 10.115.148.80 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:1c:57:8b:34:e0
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 apfPemAddUser2 (apf_policy.c:209) Changing state for mobile 00:0b:6b:24:66:55 on AP 00:1c:57:8b:34:e0 from Associated to Associated
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 Stopping deletion of Mobile Station: (callerId: 48)
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 Sending Assoc Response to station on BSSID 00:1c:57:8b:34:e0 (status 0)
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 apfProcessAssocReq (apf_80211.c:3838) Changing state for mobile 00:0b:6b:24:66:55 on AP 00:1c:57:8b:34:e0 from Associated to Associated
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Connecting state
Mon Aug 8 15:41:23 2011: 00:0b:6b:24:66:55 Sending EAP-Request/Identity to mobile 00:0b:6b:24:66:55 (EAP Id 1)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL START from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Connecting state
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP-Request/Identity to mobile 00:0b:6b:24:66:55 (EAP Id 2)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received Identity Response (count=2) from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 EAP State update from Connecting to Authenticating for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Authenticating state
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=204) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 WARNING: updated EAP-Identifer 2 ===> 204 for STA 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 204)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 204, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=205) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 205)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 205, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=206) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 206)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 206, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=207) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 207)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 207, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=208) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 208)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 208, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=209) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 209)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 209, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=210) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 210)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 210, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=211) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 211)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 211, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=212) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 212)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 212, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=213) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 213)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 213, EAP Type 25)
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=214) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:41:34 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 214)
Mon Aug 8 15:42:04 2011: 00:0b:6b:24:66:55 802.1x 'timeoutEvt' Timer expired for station 00:0b:6b:24:66:55
Mon Aug 8 15:42:04 2011: 00:0b:6b:24:66:55 Retransmit 1 of EAP-Request (length 127) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Association received from mobile on AP 00:1c:57:8b:0d:40
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 STA - rates (8): 130 132 139 150 140 18 152 36 176 72 96 108 0 0 0 0
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 STA - rates (12): 130 132 139 150 140 18 152 36 176 72 96 108 0 0 0 0
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing RSN IE type 48, length 20 for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received RSN IE with 0 PMKIDs from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Deleted mobile LWAPP rule on AP [00:1c:57:8b:34:e0]
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Updated location for station old AP 00:00:00:00:00:00-0, new AP 00:1c:57:8b:0d:40-0
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Initializing policy
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 10.115.148.80 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:1c:57:8b:0d:40
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 apfPemAddUser2 (apf_policy.c:209) Changing state for mobile 00:0b:6b:24:66:55 on AP 00:1c:57:8b:0d:40 from Associated to Associated
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Stopping deletion of Mobile Station: (callerId: 48)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending Assoc Response to station on BSSID 00:1c:57:8b:0d:40 (status 0)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 apfProcessAssocReq (apf_80211.c:3838) Changing state for mobile 00:0b:6b:24:66:55 on AP 00:1c:57:8b:0d:40 from Associated to Associated
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Connecting state
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP-Request/Identity to mobile 00:0b:6b:24:66:55 (EAP Id 1)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received Identity Response (count=1) from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 EAP State update from Connecting to Authenticating for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Authenticating state
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=153) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 WARNING: updated EAP-Identifer 1 ===> 153 for STA 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 153)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 153, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=154) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 154)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response packet with mismatching id (currentid=154, eapid=153) from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 154, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=155) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 155)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 155, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=156) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 156)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 156, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=157) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 157)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 157, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=158) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 158)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 158, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=159) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 159)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 159, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=160) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 160)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 160, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=161) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 161)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 161, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=162) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 162)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 162, EAP Type 25)
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=163) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:42:33 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 163)
Mon Aug 8 15:43:03 2011: 00:0b:6b:24:66:55 802.1x 'timeoutEvt' Timer expired for station 00:0b:6b:24:66:55
Mon Aug 8 15:43:03 2011: 00:0b:6b:24:66:55 Retransmit 1 of EAP-Request (length 127) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:33 2011: 00:0b:6b:24:66:55 802.1x 'timeoutEvt' Timer expired for station 00:0b:6b:24:66:55
Mon Aug 8 15:43:33 2011: 00:0b:6b:24:66:55 Retransmit 2 of EAP-Request (length 127) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Association received from mobile on AP 00:1c:57:8b:0d:40
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 STA - rates (8): 130 132 139 150 140 18 152 36 176 72 96 108 0 0 0 0
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 STA - rates (12): 130 132 139 150 140 18 152 36 176 72 96 108 0 0 0 0
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing RSN IE type 48, length 20 for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received RSN IE with 0 PMKIDs from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Initializing policy
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 10.115.148.80 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 10.115.148.80 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:1c:57:8b:0d:40
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 apfPemAddUser2 (apf_policy.c:209) Changing state for mobile 00:0b:6b:24:66:55 on AP 00:1c:57:8b:0d:40 from Associated to Associated
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Stopping deletion of Mobile Station: (callerId: 48)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending Assoc Response to station on BSSID 00:1c:57:8b:0d:40 (status 0)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 apfProcessAssocReq (apf_80211.c:3838) Changing state for mobile 00:0b:6b:24:66:55 on AP 00:1c:57:8b:0d:40 from Associated to Associated
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Connecting state
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP-Request/Identity to mobile 00:0b:6b:24:66:55 (EAP Id 1)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received Identity Response (count=1) from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 EAP State update from Connecting to Authenticating for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 dot1x - moving mobile 00:0b:6b:24:66:55 into Authenticating state
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=174) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 WARNING: updated EAP-Identifer 1 ===> 174 for STA 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 174)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 174, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=175) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 175)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 175, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=176) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 176)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 176, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=177) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 177)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 177, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=178) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 178)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 178, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=179) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 179)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 179, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=180) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 180)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 180, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=181) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 181)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 181, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=182) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 182)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 182, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=183) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 183)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAPOL EAPPKT from mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Received EAP Response from mobile 00:0b:6b:24:66:55 (EAP Id 183, EAP Type 25)
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Response state for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Processing Access-Challenge for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Entering Backend Auth Req state (id=184) for mobile 00:0b:6b:24:66:55
Mon Aug 8 15:43:37 2011: 00:0b:6b:24:66:55 Sending EAP Request from AAA to mobile 00:0b:6b:24:66:55 (EAP Id 184)
Mon Aug 8 15:44:07 2011: 00:0b:6b:24:66:55 802.1x 'timeoutEvt' Timer expired for station 00:0b:6b:24:66:55
Mon Aug 8 15:44:07 2011: 00:0b:6b:24:66:55 Retransmit 1 of EAP-Request (length 127) for mobile 00:0b:6b:24:66:55
(vau-cr-wlc4402-1) >debug disable-allHi,
Check the username/password database on the AD if ur using one or check if the AD is integrated correctly with the IAS or the ACS.
Issue either on the IAS or ACS (RADIUS server) , the WLC is waiting for the response from the RADIUS.
Regards
Surendra -
Sync Process stuck on the Process State
This morning i check the Sync status like every morning and find out this issue:
Sync failed with the exception "Error in RelationalProviderProxy.ExecuteAndRetryServiceOperation, Method: Void <BeginSession>b__0(), CurrentTimeout: 60 Exception
Details: System.ServiceModel.Security.MessageSecurityExceptionThe security timestamp is invalid because its creation time ('2014-10-27T20:43:13.669Z') is in the future. Current time is '2014-10-27T20:38:13.124Z' and allowed clock skew is '00:05:00'.Server
stack trace: at System.ServiceModel.Security.SecurityTimestamp.ValidateFreshness(TimeSpan timeToLive, TimeSpan allowedClockSkew) at System.ServiceModel.Security.SecurityTimestamp.ValidateRangeAndFreshness(TimeSpan timeToLive, TimeSpan allowedClockSkew)
at System.ServiceModel.Security.ReceiveSecurityHeader.ReadTimestamp(XmlDictionaryReader reader) at System.ServiceModel.Security.ReceiveSecurityHeader.ExecuteFullPass(XmlDictionaryReader reader) at System.ServiceModel.Security.StrictModeSecurityHeaderElementInferenceEngine.ExecuteProcessingPasses(ReceiveSecurityHeader
securityHeader, XmlDictionaryReader reader) at System.ServiceModel.Security.ReceiveSecurityHeader.Process(TimeSpan timeout, ChannelBinding channelBinding, ExtendedProtectionPolicy extendedProtectionPolicy) at System.ServiceModel.Security.TransportSecurityProtocol.VerifyIncomingMessageCore(Message&
message, TimeSpan timeout) at System.ServiceModel.Security.TransportSecurityProtocol.VerifyIncomingMessage(Message& message, TimeSpan timeout) at System.ServiceModel.Security.SecurityProtocol.VerifyIncomingMessage(Message& message, TimeSpan
timeout, SecurityProtocolCorrelationState[] correlationStates) at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.ProcessReply(Message reply, SecurityProtocolCorrelationState correlationState, TimeSpan timeout) at
System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String
action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage
message)Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SqlAzureDataSync.ClientServerCommon.ISyncServiceContract.BeginSession(String scopeName, SyncTaskRequestInfo syncInfo, DssConflictResolutionPolicy conflictPolicy, String objectSchema) at Microsoft.SqlAzureDataSync.AgentHostLib.RelationalProviderProxy.<BeginSession>b__0()
at Microsoft.SqlAzureDataSync.AgentHostLib.SyncServiceProxy`1.ExecuteAndRetryServiceOperation(Action operation)Inner exception: The security timestamp is invalid because its creation time ('2014-10-27T20:43:13.669Z') is in the future. Current time is
'2014-10-27T20:38:13.124Z' and allowed clock skew is '00:05:00'." For more information, provide tracing ID ‘01b12bfd-1467-4fb2-ad8e-551a85fdd1da’ to customer support.
And after that the Sync got stuck in the processing state, i try to stop it and resend it again but is still trying to stop it. I already fix the time settings in the server and restart the service of sync and nothing. Here are the info related to the Sync
Group.
STATUS
Processing
LAST SYNC
10/27/2014 4:24:00 PM
SYNC GROUP ID
045ac6f9-d27a-47ba-8194-7aadf8fc90de_East US
LOCATION
East US
SUBSCRIPTION NAME
Pay-As-You-Go
SUBSCRIPTION ID
399ba2d3-f357-4c7b-a52e-972bcb3cc2d7
CONFLICT RESOLUTION
Client WinsHi,
Thanks for you posting the subscription ID and Sync Group ID. The Microsoft support engineer will help to solve the problem from backend. Sometime delay might be expected. Your patience is greatly appreciated. Thank you for your understanding and support.
Regards,
Mekh. -
TS1702 My kindle app for iPad is stuck in the installing state what do I do to fix it?
My kindle app for iPad is stuck in the installing state what do I do to fix it?
Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
My MacBook Air is stuck on the login screen, each
My MacBook Air is stuck on the login screen, each time I enter the password it stops (but does reject an incorrect password)
Restore OS X.
If your Mac has v10.7, v10.8, or v10.9 installed, startup your Mac while holding down the Command + R keys. From there you can restore OS X using OS X Recovery
For OS X prior to v10.7, boot from your install disc while holding down the C key. -
I turned on filevault but after restarting i got stuck at the login screen.
I turned on filevault but after restarting i got stuck at the login screen. my trackpad is working but not clicking. i tried random keys and finally got to enter my password via keyboard. now i am afraid of shutting my mac , what to do?
There is a known problem and I am having exact same issue. Power cycling and internet cache does not fix the issue. When a connection to a server fails it has nothing to do with caching issues. It is a network issue on AT&Ts end in a localized region. It works in multiple towers in various locations but does not work where I am. I have reported this to AT&T.
-
Wireless Switch stuck on the OFF state
Hello! About 2 months ago I switched to the Windows 10 preview and would experience Internel_Power_Error, whatever not a big deal it was once every so often so it didnt bother me too much, then after Windows 10 came out I was experience this error all the time making my laptop effectivly a paper weight. I set the laptop aside since, today I pulled it out and grabbed my Windows 7 Install CD as well as the PowerSpec Driver CD. I was able to successfully go back to windows 7, but for some reason the Built-in switch to toggle Bluetooth and Wireless is stuck on the OFF (Orange/Amber) state. I have a second computer so I was able to research and transfer via USB the correct Ethernet drivers. However my laptop is still indicating that there are no connections available. My Ethernet and wireless Controller, QualComm Atheros QCA9565 802.11b/G/N WiFi Adapter:PCI\VEN_10EC&DEV_8168&SUBSYS_1944103C&REV_0CShould have driver: SP64676However when I try to install this driver it completes its install and says the driver was not installed correctly. I also have PCI Device which is missing a driver acording to the Device Manager:PCI\VEN_10EC&DEV_5227&SYBSYS_1942103C&REV_01 As well as an unknown Device:ACPI\HPQ6007 Is it possible that due to the Switch being in the OFF state these drivers are not able to install properaly? If so how do I go about disabling the Switch completly so the button has no effect on the computer whats so ever? Thank you for your time, I have looked at so many threads and tried everything I could so if anyone can point me in the right direction that would be wonderful! -Andrew
I really need some help here, I have a $900 paperweight sitting on my desk collecting dust. If anyone has any ideas no matter how crazy it is, I will try it. -Andrew
-
Macbook Pro stuck at the login screen
This morning I dropped my laptop by catching the charging cable the laptop fell on the floor but everything seemed to be normal.
I then decided to back up straight away so I started time machine. I stupidly started doing some user instensive things on my mac whilst this was going on e.g. playing a game which can sometimes crash. When it did crash I left it for half an hour or so to see if it would bring up force quit or switch out of the crashed programme. This didn't happen so, like i've done in the past, I hard reset holding down the power button.
When I turned on the mac everything seemed normal I got to the login screen and it offered to startup the computer as it was before I restarted. This was a bit odd as I normally get this message when i've actually logged in. My Backup drive also asked for a password which was also strange for the same reason. I then attempted to login to the computer I typed my password in. It was accepted and the screen went white and then went back to the login screen.
I repeated this a few times, restarting etc before I tried using disk utility in recovery mode. When verifying the disk no problems were found. Disk permissions found two problems, which unfortunately I can't remember (1 was to do with the library), I then repaired disk permissions. I tried to start again but got the same problem.
I then stared in safe mode. I'm now meant to be in safe mode but i'm not 100% sure as everything seems the same except everythign is very slow.
Midbackup my computer crashed so i'm wondering if there are any problems there (especially as it was the first backup I made on my new external HD). I'm now trying to backup in safemode but i'm not sure if that's the best thing to do (as not everything might not copy over and I could potentially ruin the first backup to my new external HD). Can anyone give me any advice on what to do next, tell me where I can test whether i'm in safe mode or not and let me know if I should be backing up in safemode.
Thanks in advance
Alex
Macbook Pro August 2011 13 inch
500GB HD
4GB RAM
2.3 GHz Intel Core i5
Lion 10.7.3
UPDATE
After entering successfully what appeared to be safe mode, I restared the computer and tried logging in normally. I got the white screen (as normal) before I reached the login screen, and after entering my password it eventually did log me in. Everything seems normal but I still want to be sure. My computer seems very slow. I only have 1.25GB/4GB free of RAM and I only have two safari tabs open. I'm backing up now but i'm still a bit concerned.
Message was edited by: Alexander Richardsonthere is no installation cd, i have hit the command r function and attempted to reinstall from the recovery option stored on the computer. I am connected to the internet. It keeps saying downloading extra components and then once completed just goes b ack to main screen with my old log in informaiton as if nothing has happened. I also attempted to try to do a back up from a restore log and nothing on that as well.
-
After 10.5.2 install stuck at the login screen. Help please!
Hi all,
After installing 10.5.2 my computer rebooted to the login screen, but no matter what account I select (I have 3) it goes to a blue screen for a few seconds and then right back to the login screen. I've tried booting in safe mode and also resetting the PRAM. I've been reading this forum, but don't seem to see anyone else having this same exact problems.
Any suggestions?I have had problems after the 10.5.2 update. I ended up with a frozen computer - unable to restart or shut down etc. Also ended up at one stage with Set Up Assistant screen. With the help of a computer savvy friend, at least I am able to use my computer again.
It appears the actual download did happen but it did not install and the computer tells me I need to "re-start". When I did this, window appeared on plain blue screen saying it was installing software but absolutely nothing happened - no blue scrolling bar etc.
My iMac computer is still under Apple Care Plan and technician told me they are many problems surfacing across the various machines with this upgrade. He has asked me to delay updating the software and to ring back in a couple of days because their technicians are currently working on the problem and he hopes for an answer soon. -
My Mac is stuck at the login password
every time i try to login loads for a few seconds and then comes back and asks me again for the password it would be great if somebody could tell me the problem and or how to fix it, thank you.
I keep having a similar issue. I type in the CORRECT password, and it tries to start up, but then a message pops up saying something like "Cannot log into 'user account' at this time..." and then the login window shakes as if it were the incorrect password... I've tried this over and over, which eventually brings me to the option of changing the password using the master password. I've tried this, but the thing won't even take after that too! I also tried the whole deal with putting in the restore disc and holding the "C" button during startup. I tried the HD restore option, that doesn't erase all my existing files, and it still won't log in. I'm getting ready to call Apple tonight to figure this out, but hopefully someone may be able to shed some light on this issue before that???
-
I am trying to log into my account but get stuck at the login screen
Whenever I try to log into my account it starts thinking for a minute or two and then brings me back to the login screen.Is there something wrong with the account access?
There is a known problem and I am having exact same issue. Power cycling and internet cache does not fix the issue. When a connection to a server fails it has nothing to do with caching issues. It is a network issue on AT&Ts end in a localized region. It works in multiple towers in various locations but does not work where I am. I have reported this to AT&T.
-
Why are messages not dequeuing and stuck in the ready state?
Messages are successfully enqueueing but not dequeuing and are stuck in ready state (STATE = 0). The ENQ_TIME is 5 hours ahead of system time. In one environment, AQ is working (10g 10.2.0.4.0). In the other environment, it is not working (11g 11.2.0.3.0).
I just did the following:
1. Purged queue table
2. Stopped queues
3. Dropped queues
4. Dropped queue table
5. Created queue table
6. Created queues
7. Started queues
I tested once and a record was inserted in the queue table:
MSGID <msgid>
CORRID
PRIORITY 1
STATE 0
DELAY
EXPIRATION
TIME_MANAGER_INFO
LOCAL_ORDER_NO 0
CHAIN_NO 0
CSCN 0
DSCN 0
ENQ_TIME 12/23/2014 4:33:43.338902 PM
ENQ_UID <enq_uid>
ENQ_TID <enq_tid>
DEQ_TIME
DEQ_UID
DEQ_TID
RETRY_COUNT 0
EXCEPTION_QSCHEMA
EXCEPTION_QUEUE
STEP_NO 0
RECIPIENT_KEY 0
DEQUEUE_MSGID
SENDER_NAME
SENDER_ADDRESS
SENDER_PROTOCOL
USER_DATA <user_data>
USER_PROP
Notice the RETRY_COUNT is 0. The ENQ_TIME is 5 hours ahead. In the procedures to enqueue and dequeue, there are no errors.
Following is the plsql to enqueue:
CREATE OR REPLACE PACKAGE BODY
pkg_2
AS
FUNCTION queue_create_thing ( <parameters> )
RETURN NUMBER
IS
enqueue_options dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
v_message msg_type;
v_thing_id things.id%TYPE;
BEGIN
v_message := msg_type( <parameters> );
dbms_aq.enqueue(queue_name => '<queue name>',
enqueue_options => enqueue_options,
message_properties => message_properties,
payload => v_message,
msgid => message_handle);
RETURN v_thing_id;
EXCEPTION
WHEN OTHERS
THEN
errpkg.record_and_stop (SQLCODE);
END queue_create_thing;
PROCEDURE queue_delete_thing( <parameters> )
IS
enqueue_options dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
v_message msg_type;
BEGIN
v_message := msg_type( <parameters> );
dbms_aq.enqueue(queue_name => '<queue name>',
enqueue_options => enqueue_options,
message_properties => message_properties,
payload => v_message,
msgid => message_handle);
END;
END pkg_2;
Following is the code to dequeue:
CREATE OR REPLACE PACKAGE BODY
pkg_1
AS
PROCEDURE create_thing ( context IN RAW,
reginfo IN sys.aq$_reg_info,
descr IN sys.aq$_descriptor,
payload IN RAW,
payloadl IN NUMBER )
IS
dequeue_options dbms_aq.dequeue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
message msg_type;
BEGIN
dequeue_options.msgid := descr.msg_id;
dequeue_options.consumer_name := descr.consumer_name;
DBMS_AQ.DEQUEUE(queue_name => descr.queue_name,
dequeue_options => dequeue_options,
message_properties => message_properties,
payload => message,
msgid => message_handle);
pkg_2.create_thing( p_thing_id => message.thing_id );
UPDATE table t
SET creation_complete = 1
WHERE id = message.thing_id;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
plog.error(SQLERRM);
plog.full_call_stack;
END create_thing;
PROCEDURE delete_thing ( context IN RAW,
reginfo IN sys.aq$_reg_info,
descr IN sys.aq$_descriptor,
payload IN RAW,
payloadl IN NUMBER )
IS
dequeue_options dbms_aq.dequeue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
message msg_type;
BEGIN
dequeue_options.msgid := descr.msg_id;
dequeue_options.consumer_name := descr.consumer_name;
DBMS_AQ.DEQUEUE(queue_name => descr.queue_name,
dequeue_options => dequeue_options,
message_properties => message_properties,
payload => message,
msgid => message_handle);
pkg_2.delete_thing( p_thing_id => message.thing_id );
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
plog.error(SQLERRM);
plog.full_call_stack;
END delete_thing;
END pkg_1;Following is the code to create the queue:
BEGIN
SYS.DBMS_AQADM.STOP_QUEUE ( QUEUE_NAME => '<queue name>');
SYS.DBMS_AQADM.DROP_QUEUE ( QUEUE_NAME => '<queue name>');
END;
BEGIN
SYS.DBMS_AQADM.CREATE_QUEUE
QUEUE_NAME => '<queue name>'
,QUEUE_TABLE => '<queue table>'
,QUEUE_TYPE => SYS.DBMS_AQADM.NORMAL_QUEUE
,MAX_RETRIES => 5
,RETRY_DELAY => 0
,RETENTION_TIME => 0
,COMMENT => 'Queue for processing creation of things'
END;
BEGIN
SYS.DBMS_AQADM.START_QUEUE
QUEUE_NAME => '<queue name>'
,ENQUEUE => TRUE
,DEQUEUE => TRUE
END; -
Polycom CX500 stuck on the login screen !
Hello ladies and gentlemen :)
Recently bought a Polycom CX500 and I literally want to commit a suicide because of this phone ! Can someone help me or guide me how I can bypass the lync setup or tell me how to access the menu of this phone ?
My problem is that I don't have a lync account and when the phone boots up it asks for an extension or phone number -> then the PIN number !
Any other ways to login or skip this step ! The phone is currently running on firmware version 4.0.7577.4372.
I just want to enter the phone menu and check its parameters and what can be done, but since I can't actually get into the phone, don't really know how to deal with that.
Thanks for your time and help.
Dementor HHello Dementor H
the CX500 unlike the CX600 and CX3000 do not have a USB port to bypass the LYNC PIN and Extension login method.
You will require to setup a DHCP server to provide Option 43, 120 and the NTP server.
Without that the phone cannot sign into LYNC. If you do not have an on premise LYNC server providing this the phone cannot be used. There is no Menu where you could add any details once the phone has signed in.
Best Regards
Steffen Baier
Steffen Baier Polycom Product Support Specialist, EMEA Escalations -
Disabling the previous agent info on the login screen
We are using IPCC enterprise 8.03 with CTIOS and offer multiple shifts in our call center. Due to security reasons, we would like to disable the last agent logged in info from the IPCC agent desktop. Currently when an agent launches IPCC desktop, it displays the agent id and extension of the last agent who was logged in; we would like to set it where last agent's information is not automatically pre-populated.
Thanks for your help..we use the below bat file for lauching CAD to remove existing agent data.
@echo off
setlocal
REM # This script re-writes the .ini file for CAD to clean up old usernames.
REM # It restors a copy of the .ini file over the current version, and
REM # substitues the username field with the current user and removes
REM # (blanks) any existing phone extension.
set INI_LOCATION="C:\Program Files\Cisco\Desktop\config\PhoneDev.cfg"
REM set INI_LOCATION=PhoneDev.ini
REM ### Original File: ###
REM [PhoneDevice]
REM Appearance0=6752
REM [AgentID]
REM AgentID=test
REM [AgentMobilePhone]
REM RemoteAgent=0
REM Number=
REM AgentWorkMode=0
REM ######## END of Original #####
C:
REM ## Build new file from scratch
echo [PhoneDevice] > %INI_LOCATION%
echo Appearance0= >> %INI_LOCATION%
echo [AgentID] >> %INI_LOCATION%
echo AgentID=%USERNAME% >> %INI_LOCATION%
echo [AgentMobilePhone] >> %INI_LOCATION%
echo RemoteAgent=0 >> %INI_LOCATION%
echo Number= >> %INI_LOCATION%
echo AgentWorkMode=0 >> %INI_LOCATION%
REM # END
cd "C:\Program Files\Cisco\Desktop\bin"
start agent.exe
exit
Maybe you are looking for
-
ITunes home sharing and store unable to open due to errors
For some reason I am unable to connect to home sharing (error -2146885613) , the iTunes store (error 0x80092013) and basically anything else that involves internet off iTunes. I also can't update to the latest version of iTunes (yet another error oc
-
GOT MACROMEDIA FLASHPLAYER WORKING
download version 8
-
My LR2 is missing the templates can anyone help?
I am in LR2, print mode/contact sheet/grid. I have 36 photo's I am attempting to template in a 4x5 contact sheet. However my templates are empty and I am so new to the program I do not know what to do. This assignment is due today and I have ran out
-
To use cursor as an OUTPUT paramete in Oracle Store Procedure
I want to return a ref cursor from an oracle store procedure. Is is possible? How? Syntax?
-
Necessary functions to implement
Hello There, I recently bought a E-Series kind NI PCI-6014 Board. I am using this board to communicate with a control system. I am mainly sending and receiving DC voltages. The communication has been realized with traditional DAQ in VB6. There are lo