Agent "User" is not enabled for enterprise voice. Only Enterprise Voice users can receive Response Group calls.

I have standard edition Lync 2013 deployed. I have also enabled enterprise Voice for all my users.
When I try to create a response group under group tab, I add the enterprise voice enabled users to the group and click on commit I get this warning:
Agent "User" is not enabled for enterprise voice. Only Enterprise Voice users can receive Response Group calls.
This is clearly a glitch since the users are already enabled for enterprise voice. Has anyone come across this issue before?
Thanks

Have you tried restarting the Response Group service? Are you able to add any EV enabled users to this RGS?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Lync Sorted blog

Similar Messages

  • ACL is not enabled for this user  OSX 10.5

    I am running OS X 10.5 on a Mini Mac.
    It was a clean install, everything went smoothly except for configuring the mail server.
    I created my users as I normally do using Workgroup manager.
    However 2 out of 3 of users I created can not log into the IMAP server.
    You get the error message ACL is not enabled for this user.
    What is the ACL and how do I enable it ?
    Thanks
    Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
    Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user
    Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
    Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user

    Hi there
    I had the same problem and I found this post which fixed it:
    http://discussions.apple.com/thread.jspa?threadID=1244694&tstart=0
    Hope it works for you too!
    Chris

  • Thousands of "mail is not enabled for this user"

    Someone is sending my domain email to thousands of non existent mail accounts. It's like they are combining every possible prefix to my domain they know of. It's been going on for weeks. The Mail service, however, is not being brought down by this at all. So I don't know what kind of attack this is or how to stop it.
    Can someone help me? Below is a minute section of my System log:
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    ------------------

    Two possibilities - both fall under the heading 'reconaissance by e-mail'. A spammer or hacker will try 1000's of common names, then look at which ones didn't bounce to determine which ones have accounts on your system.
    They then have a comprehensive list of account names on your server, and can proceed to attempt likely passwords for each, or send endless spam to your users. Either one is a Bad Thing, doubly so if you've got any accounts that you created just to test things, and have weak passwords, but you've always counted on nobody knowing they exist.
    At one point, I actually had a 'testuser' account that had 'testuser' as the password - I just hadn't remembered to delete it after I was done testing. It's very common for a system to have a couple of these hanging around. I didn't have trouble with it, but looking for and getting rid of these is critical.
    Either way, the immdiate solution is to go Server Admin->Mail->Settings->Relay, and add the IP address(es) of the senders to the 'Refuse all messages from these hosts or networks' section. Mail attempts will still show up in your SMTP log, but they'll look like this one I got this morning (one of dozens):
    Jan 3 11:07:33 miniserver postfix/smtpd[1440]: NOQUEUE: reject: RCPT from unknown[66.180.115.17]: 554 <unknown[66.180.115.17]>: Client host rejected: Access denied; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<xptwfs.gov>
    Next is to take a look at your password policies - if you've got strong password policies (must include characters and numbers, must be 7 characters or longer, etc., you're probably OK, but if anyone has weak passwords, or god forbid, uses their userid as their password, you're pretty vulnerable.
    It's also worth noting that someone with a full list of your users has a fair number of tools for improved odds of phishing, or spear-phishing, where they create finely targeted mails that say things like 'Bob Smith told me to contact you for your password', and look very real. A warning mail to your users to remind them that they need to keep passwords secret, and be cautious about mail, even if it appears to know something about them, would be good. I wouldn't specify that you've been recon'd, just a general 'New Year Security Reminder' or some such.
    Hope this helps!

  • Customized User Profiles not loading for Network Users

    I manage Macs in public computer labs and classrooms at a university. My general set up is as follows:
    Clients are running 10.8.5, OD Masters are running 10.7.5. Open Directory Master to manage client preferences for Login window and screen saver. Clients bind to Active Directory for authentication purposes only. Networked users home directories are stored locally then deleted at log out. Using Deploy Studio to image and restore clients.
    My customized user profiles are stored in /User Templates/Non_Localized.lproj.(I also update English.lproj for any local users that may need to be created for various reasons).
    Recently I have come across a situation where, randomly, my customized user profile does not load at Login, and I am given the out-of-the-box default Apple profile. This is happening in 11 of my 14 labs. I have three labs that seem to not be affected by this.
    On some labs I manage the DHCP, some labs I do not, and rely on our Networking group to supply DHCP and DNS. Because of this setup I have six different DNS server that may be in the mix. Two are Unix boxes, the other four are the Active Directory Domain Control servers. I did create a spreadsheet of all the AD/OD settings for each lab to see if I could find some kind of pattern, but don't see a way to upload it.
    The one thing I do notice is that when I do a mass login using a shell script via Apple Remote Desktop, when the profile fails to build correctly, the user login is quick, much quicker than when the correct profile loads. Almost as if a packet is sent the the OD server, it's rejected, and bam, Apple's default profile loads.
    I have flushed the DNS cache of the local clients using killall --HUP mDNSResponder
    I've got one week to figure this out before classes start, so if you have a clue as to what's going on, I sure would be grateful.
    Here are logs from both the admin's account and the user's account when the default profile fails to build:
    ADMIN log:
    8/20/14 1:31:03.366 PM  CVMServer[109]  Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
    8/20/14 1:31:03.389 PM  loginwindow[44] Login Window - Returned from Security Agent
    8/20/14 1:31:03.491 PM  loginwindow[44] USER_PROCESS: 44 console
    8/20/14 1:31:04.084 PM  WindowServer[75]    **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    8/20/14 1:31:06.307 PM  locationd[563]  NOTICE,Location icon should now be in state 0
    8/20/14 1:31:06.478 PM  coreaudiod[560] Enabled automatic stack shots because audio IO is inactive
    8/20/14 1:31:06.621 PM  UserEventAgent[548] cannot find fw daemon port 1102
    8/20/14 1:31:08.530 PM  WindowServer[75]    Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
    8/20/14 1:31:09.707 PM  NetworkBrowserAgent[591]    Starting NetworkBrowserAgent
    8/20/14 1:31:10.393 PM  apsd[593]   Certificate doesn't match host
    8/20/14 1:31:11.499 PM  com.apple.SecurityServer[15]    Session 100010 created
    8/20/14 1:31:13.561 PM  genatsdb[608]   ########## genatsdb Sandboxed. ##########
    8/20/14 1:31:13.562 PM  apsd[593]   Certificate doesn't match host
    8/20/14 1:31:13.740 PM  com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    8/20/14 1:31:14.555 PM  apsd[593]   Certificate doesn't match host
    8/20/14 1:31:45.040 PM  genatsdb[608]   *GENATSDB* FontObjects generated = 1113
    8/20/14 1:31:55.663 PM  com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    8/20/14 1:32:20.627 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.627 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.627 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.627 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.628 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.628 PM  WindowServer[75]    dict count after removing entry for window 0x2a is 0
    8/20/14 1:32:20.641 PM  com.apple.launchd[1]    (com.apple.quicklook.satellite.4D0B4319-944D-49A6-A515-02F31AE3C235[628]) Could not terminate job: 3: No such process
    8/20/14 1:32:20.641 PM  com.apple.launchd[1]    (com.apple.quicklook.satellite.4D0B4319-944D-49A6-A515-02F31AE3C235[628]) Using fallback option to terminate job...
    8/20/14 1:32:20.645 PM  coreservicesd[65]   SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=188
    8/20/14 1:32:20.647 PM  coreservicesd[65]   SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=147
    8/20/14 1:32:20.647 PM  coreservicesd[65]   SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=194
    8/20/14 1:32:20.648 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.648 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.648 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.648 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.648 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.716 PM  loginwindow[44] DEAD_PROCESS: 44 console
    8/20/14 1:32:20.891 PM  com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    8/20/14 1:32:20.929 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.929 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.929 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.929 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.929 PM  WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
    8/20/14 1:32:20.930 PM  coreservicesd[65]   SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=158
    8/20/14 1:32:22.259 PM  WindowServer[75]    CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
    8/20/14 1:32:22.259 PM  WindowServer[75]    Session 256 released (1 references)
    8/20/14 1:32:22.259 PM  WindowServer[75]    Session 256 released (0 references)
    8/20/14 1:32:22.259 PM  WindowServer[75]    loginwindow connection closed; closing server.
    8/20/14 1:32:22.268 PM  apsd[593]   CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    8/20/14 1:32:22.285 PM  loginwindow[653]    Login Window Application Started
    8/20/14 1:32:22.299 PM  UserEventAgent[11]  Captive: [UserAgentDied:139] User Agent @port=45319 Died
    8/20/14 1:32:22.310 PM  ARDAgent[574]   CGSGetNextEventRecord (Inline) connection 0xb903, 16384 bytes
    8/20/14 1:32:22.310 PM  ARDAgent[574]   CGSShutdownServerConnections: Detaching application from window server
    8/20/14 1:32:22.310 PM  ARDAgent[574]   CGSDisplayServerShutdown: Detaching display subsystem from window server
    8/20/14 1:32:22.311 PM  blued[58]   -[CBManager init] init returning self:0x7ff6a3b04990
    8/20/14 1:32:22.329 PM  WindowServer[654]   Server is starting up
    8/20/14 1:32:22.330 PM  WindowServer[654]   Session 256 retained (2 references)
    8/20/14 1:32:22.330 PM  WindowServer[654]   Session 256 released (1 references)
    8/20/14 1:32:22.333 PM  WindowServer[654]   Session 256 retained (2 references)
    8/20/14 1:32:22.333 PM  WindowServer[654]   init_page_flip: page flip mode is on
    8/20/14 1:32:22.357 PM  WindowServer[654]   mux_initialize: Couldn't find any matches
    8/20/14 1:32:22.367 PM  WindowServer[654]   GLCompositor enabled for tile size [256 x 256]
    8/20/14 1:32:22.367 PM  WindowServer[654]   CGXGLInitMipMap: mip map mode is on
    8/20/14 1:32:22.424 PM  WindowServer[654]   WSMachineUsesNewStyleMirroring: true
    8/20/14 1:32:22.425 PM  WindowServer[654]   Display 0x04280480: GL mask 0x1; bounds (0, 0)[1920 x 1080], 30 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 0, Rotation 0
    UUID 0x000006100000a0120000000004280480
    8/20/14 1:32:22.425 PM  WindowServer[654]   Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    8/20/14 1:32:22.425 PM  WindowServer[654]   Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    8/20/14 1:32:22.429 PM  WindowServer[654]   Created shield window 0x4 for display 0x04280480
    8/20/14 1:32:22.429 PM  WindowServer[654]   Created shield window 0x5 for display 0x003f003e
    8/20/14 1:32:22.429 PM  WindowServer[654]   Created shield window 0x6 for display 0x003f003d
    8/20/14 1:32:22.431 PM  WindowServer[654]   Display 0x04280480: GL mask 0x1; bounds (0, 0)[1920 x 1080], 30 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 0, Rotation 0
    UUID 0x000006100000a0120000000004280480
    8/20/14 1:32:22.431 PM  WindowServer[654]   Display 0x003f003e: GL mask 0x4; bounds (2944, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    8/20/14 1:32:22.431 PM  WindowServer[654]   Display 0x003f003d: GL mask 0x2; bounds (2945, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    8/20/14 1:32:22.431 PM  WindowServer[654]   CGXPerformInitialDisplayConfiguration
    8/20/14 1:32:22.431 PM  WindowServer[654]     Display 0x04280480: MappedDisplay Unit 0; Vendor 0x610 Model 0xa012 S/N 0 Dimensions 18.70 x 10.51; online enabled built-in, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
    8/20/14 1:32:22.431 PM  WindowServer[654]     Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
    8/20/14 1:32:22.431 PM  WindowServer[654]     Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
    8/20/14 1:32:22.522 PM  WindowServer[654]   GLCompositor: GL renderer id 0x01022647, GL mask 0x00000007, accelerator 0x00003fab, unit 0, caps QEX|QGL|MIPMAP, vram 512 MB
    8/20/14 1:32:22.527 PM  WindowServer[654]   GLCompositor: GL renderer id 0x01022647, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    8/20/14 1:32:22.530 PM  loginwindow[653]    **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    8/20/14 1:32:22.557 PM  WindowServer[654]   Created shield window 0x7 for display 0x04280480
    8/20/14 1:32:22.557 PM  WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
    8/20/14 1:32:22.609 PM  launchctl[657]  com.apple.findmymacmessenger: Already loaded
    8/20/14 1:32:22.613 PM  hidd[49]    CGSShutdownServerConnections: Detaching application from window server
    8/20/14 1:32:22.613 PM  hidd[49]    CGSDisplayServerShutdown: Detaching display subsystem from window server
    8/20/14 1:32:22.621 PM  com.apple.SecurityServer[15]    Session 100012 created
    8/20/14 1:32:22.622 PM  loginwindow[653]    Login Window Started Security Agent
    8/20/14 1:32:22.666 PM  com.apple.dock.extra[644]   Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
    8/20/14 1:32:22.667 PM  com.apple.dock.extra[644]   Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
    8/20/14 1:32:22.681 PM  UserEventAgent[659] cannot find useragent 1102
    8/20/14 1:32:22.686 PM  com.apple.dock.extra[644]   Check-in to the service com.apple.imagent.desktop.auth failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
    8/20/14 1:32:22.693 PM  SecurityAgent[665]  MacBuddy was run = 0
    8/20/14 1:32:22.695 PM  com.apple.dock.extra[644]   CGSGetNextEventRecord (Inline) connection 0xc917, 16384 bytes
    8/20/14 1:32:22.695 PM  com.apple.dock.extra[644]   CGSShutdownServerConnections: Detaching application from window server
    8/20/14 1:32:22.695 PM  com.apple.dock.extra[644]   CGSReleaseShmem : Cannot release shared memory
    8/20/14 1:32:22.695 PM  com.apple.dock.extra[644]   CGSDisplayServerShutdown: Detaching display subsystem from window server
    8/20/14 1:32:22.696 PM  com.apple.dock.extra[644]   Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
    8/20/14 1:32:22.696 PM  com.apple.dock.extra[644]   Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
    8/20/14 1:32:22.696 PM  com.apple.dock.extra[644]   [Warning] Bad response from daemon for setup info
    8/20/14 1:32:22.704 PM  WindowServer[654]   MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280480 device: 0x106d8d110  isBackBuffered: 1 numComp: 3 numDisp: 3
    8/20/14 1:32:24.429 PM  WindowServer[654]   **DMPROXY** (2) Found /System/Library/CoreServices/DMProxy'.
    8/20/14 1:32:24.459 PM  WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
    8/20/14 1:32:24.500 PM  WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
    8/20/14 1:32:24.695 PM  com.apple.dock.extra[644]   Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
    8/20/14 1:32:24.696 PM  com.apple.dock.extra[644]   Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
    8/20/14 1:32:24.696 PM  com.apple.dock.extra[644]   [Warning] Bad response from daemon for setup info
    8/20/14 1:32:40.928 PM  com.apple.launchd[1]    (com.apple.dock.extra[644]) Exit timeout elapsed (20 seconds). Killing
    8/20/14 1:32:40.928 PM  coreservicesd[65]   SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=202
    8/20/14 1:33:35.215 PM  SecurityAgent[665]  User info context values set for jsuny
    8/20/14 1:33:35.297 PM  SecurityAgent[665]  Login Window login proceeding
    8/20/14 1:33:36.387 PM  loginwindow[653]    Login Window - Returned from Security Agent
    8/20/14 1:33:36.000 PM  kernel[0]   Sandbox: kcm(695) deny mach-lookup com.apple.networkd
    8/20/14 1:33:36.453 PM  loginwindow[653]    USER_PROCESS: 653 console
    8/20/14 1:33:37.052 PM  locationd[708]  NOTICE,Location icon should now be in state 0
    8/20/14 1:33:37.107 PM  UserEventAgent[700] cannot find fw daemon port 1102
    8/20/14 1:33:37.683 PM  xpcd[611]   MiniLauncher[711]: registration request failed: (0x12, 0xd) process failed sandbox check
    8/20/14 1:33:37.907 PM  WindowServer[654]   **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    8/20/14 1:33:38.011 PM  coreservicesd[65]   SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=237
    8/20/14 1:33:38.114 PM  WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
    8/20/14 1:33:38.395 PM  imagent[737]    [Warning] Setting up a new messages database.
    8/20/14 1:33:38.428 PM  NetworkBrowserAgent[747]    Starting NetworkBrowserAgent
    8/20/14 1:33:40.068 PM  com.apple.time[700] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    8/20/14 1:33:40.069 PM  com.apple.time[700] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    8/20/14 1:33:43.910 PM  netbiosd[89]    name servers down?
    8/20/14 1:33:56.635 PM  netbiosd[89]    notify name "self.mdns.disconnection" has been registered 20 times - this may be a leak
    8/20/14 1:33:56.639 PM  netbiosd[89]    notify name "self.mdns.disconnection" has been registered 40 times - this may be a leak
    8/20/14 1:34:49.927 PM  netbiosd[89]    name servers down?
    8/20/14 1:35:54.977 PM  netbiosd[89]    name servers down?
    USER LOG:
    8/20/14 1:31:03.956 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: UserName
    8/20/14 1:31:03.956 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: GroupName
    8/20/14 1:31:03.957 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    8/20/14 1:31:03.961 PM  loginwindow[44] Connection with distnoted server was invalidated
    8/20/14 1:31:04.013 PM  distnoted[549]  # distnote server agent  absolute time: 799.097924175   civil time: Wed Aug 20 13:31:04 2014   pid: 549 uid: 1467285364  root: no
    8/20/14 1:31:08.954 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[588]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
    8/20/14 1:31:08.955 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[588]) Job failed to exec(3) for weird reason: 2
    8/20/14 1:31:08.958 PM  com.apple.launchd.peruser.1467285364[536]   (com.google.keystone.user.agent[590]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
    8/20/14 1:31:08.958 PM  com.apple.launchd.peruser.1467285364[536]   (com.google.keystone.user.agent[590]) Job failed to exec(3) for weird reason: 2
    8/20/14 1:31:12.394 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.mrt.uiagent[578]) Exited with code: 255
    8/20/14 1:31:15.132 PM  SystemUIServer[557] Could not load menu extra NSBundle </System/Library/CoreServices/Menu Extras/User.menu> (loaded) for Class AppleUser
    8/20/14 1:32:20.642 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.quicklook[626]) Exited: Killed: 9
    8/20/14 1:32:20.647 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.mdworker.single.08000000-0000-0000-0000-000000000000[641]) Exited: Killed: 9
    8/20/14 1:32:20.647 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[635]) Exited: Killed: 9
    8/20/14 1:32:20.783 PM  Dock[556]   could not open iterator, -43, for directory <ECDirectory: 0x7fd8ac846970> {path=/Users/jsuny/Documents/} (directory changed)
    8/20/14 1:32:20.783 PM  Dock[556]   problem iterating directory, -43, for directory <ECDirectory: 0x7fd8ac846970> {path=/Users/jsuny/Documents/} (directory changed)
    8/20/14 1:32:22.310 PM  ARDAgent[574]   HIToolbox: received notification of WindowServer event port death.
    8/20/14 1:32:22.311 PM  ARDAgent[574]   port matched the WindowServer port created in BindCGSToRunLoop
    8/20/14 1:32:22.694 PM  com.apple.dock.extra[644]   HIToolbox: received notification of WindowServer event port death.
    8/20/14 1:32:22.694 PM  com.apple.dock.extra[644]   port matched the WindowServer port created in BindCGSToRunLoop
    8/20/14 1:33:36.504 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: UserName
    8/20/14 1:33:36.504 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: GroupName
    8/20/14 1:33:36.505 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    8/20/14 1:33:36.517 PM  loginwindow[653]    Connection with distnoted server was invalidated
    8/20/14 1:33:37.429 PM  MiniLauncher[711]   Skipping Setup Assistant for user 1467285364
    8/20/14 1:33:37.464 PM  transition[714] INFO: Not signed into MobileMe, nothing to do. Reason: 3
    8/20/14 1:33:37.506 PM  MiniLauncher[711]   INFO: MMAccountMgr_Private: finishedSetup called.
    8/20/14 1:33:38.180 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[744]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
    8/20/14 1:33:38.180 PM  com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[744]) Job failed to exec(3) for weird reason: 2
    8/20/14 1:33:38.489 PM  CalendarAgent[741]  Could not find Meta Data for persistent Store
    8/20/14 1:33:38.877 PM  fontd[716]  FontWorker failed to return directory info (IPC failure?) for file://localhost/Users/jsuny/Library/Fonts/
    8/20/14 1:34:48.723 PM  migCacheCleanup[719]    Cache cleanup: cleanup for user 1467285364 took 0.43 seconds
    8/20/14 1:37:15.114 PM  Dock[723]   no information back from LS about running process

    Check these out:
    http://images.apple.com/server/macosx/docs/UserManagementv10.5.mnl.pdf
    http://clc.its.psu.edu/Labs/Mac/Resources/blastimageconfig/
    
http://blog.macadmincorner.com/

  • ERROR: user is not configured for keystore 'service_ssl'

    hi experts:
    System environment:
    pi7.0  j2ee sp09
    ECC6.0 patch level11
    Here is my scenarios..
    ECC6.0-->(IDOC)XI(CIDX)--
    >External system.
    External system-->(CIDX)XI(IDOC)--
    >ECC6.0
    1.we have got there certificates from external system (rootCA.DER,intermedia.DER,Server.DER), imported the 3 certs files to TrustedCAs view using VA tool after we configured the SSL enable.
    2.We generated the CSR file and got the response from CA. we import the CSR response to SERVICE_SSL service
    3.I have assigned the role(keystoreadministrator) to user(PIAFUSER,PIAPPLUSER) in security provide service.
    4.I configured the IR and ID for the first sceniro. I Selected the "service_ssl" view and "TrustedCAs" view in received agreement in ID, and selected the "service_ssl" view in comunication channeland. actived all of them.
    issue :
    as soon I trigger the message to external. It is OK in monitor for processed XML Message.
    BUT I got the error message in runtime workbench/adapter engine/communication channel mornitoring.
    Channel Name: Buyer_Send_OrderChange
    Receiver Agreement: |com_sap_abap_r3_200|Sell_elemic|CIDX_E45_20_seller|OrderChange
    Security Settings > Current certificate configured for signing:
    ERROR: user is not configured for keystore 'service_ssl'
    Security Settings > Partner certificate configured for signing:
    ERROR: user is not configured for keystore 'TrustedCAs'
    Thanks!!.

    The question have been solved ..
    thanks!
                         xixi

  • Google talk not working on my 8310..."service not enabled for this handheld"

    Hi,
    I use a 8310 curve (I use a 8310 Curve software version 4.2.2.181 (Platform 2.5.0.35). My firm has an enterprise server.
    I tried installing google ttalk on my device but i get an error message...."Service not enabled for this handheld". 
    My colleagues using the same device with the same software version did not face this problem and are able to use GTalk mobile.
    Please let me know how this can be solved.
    Thanks,
    Jassi

    It should be installed without any issue!!!
    Check with your BES admin to know whether they've blocked GTalk usage for employees.
    Another thing are you on AT&T? If yes then you won't be able to use Google Talk. Check this link for details.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Need a program which finds out if a user has not logged for 3 days?

    HI,
       I NEED A PROGRAM WHICH FINDS OUT IF ANY USER HAS NOT LOGGED FOR THREE DAYS
        AND SEND A MAIL TO THE BASIS TEAM.IT SHOULD BE SHEDULED AS A BACKGROUND PROCESS.
    I SEARCHED IN GOOGLE BUT NOT ABLE TO FIND IT.
    PLEASE HELP ME OUT WITH THIS.
                    REGARDS,
                          MANI

    use table USR02 and analyse field field TRDAT
    X = sy-datum - usr02-trdat.
    -> if x ge 3...
    for mail use e.g. fm SO_NEW_DOCUMENT_ATT_SEND_API1
    hope that helps
    Andreas from germany

  • Why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?

    Hi All,
    Does anyone know why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?
    I just found this out after I installed bootcamp and Windows 7 on my Macbook 13" with P8600 2.4Ghz CPU 2GB RAM and 250G HDD after more than a year of using it.
    After I installed the CPU monitoring widget on Windows 7 and CPUZ, I noticed that the lowest Freq that my Macbook operates even with <5% CPU load is only 1.5Ghz and VID @1.0V.
    I installed Coolbook on OSX to confirm what I saw on Windows. I was surprised that SLFM is not visible in Coolbook which is the same result I got from Windows 7 CPU monitoring widget and CPUZ.
    I checked with our local Mac support and they got the same results for all of Macbook 13" Aluminums late 2008 model. SLFM is not visible on Coolbook which means, it is not enabled.
    I tried to install Coolbook on my wife's Macbook Pro 13" 2010, which has the same spec, P8600 2.4Ghz CPU and 250G HDD. The only difference is the memory which is 4GB RAM. There, SLFM is enabled and works just fine, running at 798Mhz @0.875V.
    Can anyone please help confirm if this is really the case for Macbook 13" late 2008 model?
    Because I checked the Intel P8600 Datasheet and SLFM should always be enabled. Otherwise, it will affect battery life as well as long term reliability of the CPU.
    I would appreciate if the Macbook and Macbook Pro owners in this forum can help confirm using Coolbook the status of SLFM in your own Macbooks. You may use any other tool in checking the SLFM and share it with us if you believe it is more reliable and better than Coolbook. Thanks.
    Message was edited by: jespada

    BTW, Here is what I got from Coolbook for comparison. As you can see the late 2008 Macbook has no SLFM info.
    Legend:
    SLFM - Super Low Freq Mode
    LFM - Low Freq Mode
    HFM GV - High Freq Mode (Geyserville/Speedstep)
    HFM - High Freq Mode
    Macbook 13" Aluminum late 2008 P8600 2.4Ghz 2GB RAM 250GB HDD
    Freq VID
    SLFM -- --
    LFM 1596Mhz 1.0000V
    HFM GV2 1862Mhz 1.0500V
    HFM GV1 2128Mhz 1.1000V
    HFM 2394Mhz 1.1375V
    Macbook Pro 13" Aluminum 2010 P8600 2.4Ghz 4GB RAM 250GB HDD
    Freq VID
    SLFM 798Mhz 0.8750V
    LFM 1596Mhz 1.0000V
    HFM GV2 1862Mhz 1.0500V
    HFM GV1 2128Mhz 1.1000V
    HFM 2394Mhz 1.1375V
    Message was edited by: jespada
    Message was edited by: jespada

  • Shared Services Console - User is not authorized for the action

    Hi,
    I have installed Essbase 11.11.3 and configured on Linux. I started EPM and then the Shared Services Console. I created a new group Poweruser and assigned a new user to it. I provisioned the group withall the rights of the admin. This all works.
    When I log on with the new user on the Shared Service Console and go to Essbase Studio Server and click on the Essbase Studio Server application it gives me the message:
    User is not authorized for the action
    This is the same message as I get under the user admin. Can anyone tell me what I can possibly do to make it work.
    The service for EAS is started properly. The one thing that is not configured is HBR.
    Patrick

    Hi,
    What are you trying to achieve, provision a user for essbase studio ?
    EAS is a separate product from Studio.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • The stack sub menu does not enable for stacked photos in elements organizer 13 on windows 8.1

    The stack sub menu does not enable for stacked photos in elements organizer 13 on windows 8.1.
    Has anyone else experienced this?
    I stacked some photos, now I cannot expand them or unstack them in the organizer.
    This is for both auto and manual stacking.

    Please press Ctrl+D to move to the older grid and now the stack option should be enabled.
    Thanks,
    Anwesha

  • Icq on Blackberry "Service not enabled for this handheld"

    Every time I try to login to icq on my blackberry it gives me an error that says "Service not enabled for this handheld".  I called Sprint whom my service is through and they told me that everything is enabled for messaging programs on my account.  Does anyone know how I can get this working?  My blackberry is an 8830 world edition.
    Message Edited by harley9 on 03-03-2009 03:31 PM

    Reminder to remain courteous and on topic. Thanks

  • Service not enabled for this handheld.

    I have downloaded yahoo messenger for my BB curve 8310, but when I go to log in it says that the service is not enabled for this handheld.  How do I enable it?
    thanks!!

    Please check with your carrier whether your carrier or your region supports yahoo access.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • ERROR: XIAFUSER user is not configured for keystore.....

    Hi all,
    When I am running the an adpater on XI that uses digital signatures that I have loaded into the TrustedCA's keystore view I get this error in my monitor.
    ERROR: XIAFUSER user is not configured for keystore TrustedCA's.
    How do I configure a user for a specific keystore?
    Kind Regards,
    Chris

    Hi
    You can find it from XI config doc here
    https://websmp106.sap-ag.de/~sapidb/011000358700001697502004E.PDF
    Also refer installation & post installation from here
    https://websmp106.sap-ag.de/~sapidb/011000358700009389172004E.PDF
    Cheers
    Jawahar Govindaraj
    PS:Reward pts

  • LiveLinkException [HR#10049]: User is not provisioned for this operation

    Hi,
    I installed EAL 11.1.1.4.000 on win2008 R2 64bit Japanese OS.
    But I met an issue after successful added Analytics Link Server node.
    When Adding bridge components to an Analytics Link Server, the error message said as:
    "Financial Management Server cannot be added: User is not provisioned for this operation"
    and the EAL.log shows:
    "LiveLinkException [HR#10049]: User is not provisioned for this operation"
    Does it means I did the wrong setting when configure EAL?
    Thanks

    Have you set up the correct provisioning for the user in Shared Services?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • In my iphone6, voice over got switched on and screen got locked. Phone is not responding for slide but only responding for double tap. Phone is not accepting my passcode as I double tap in passcode screen. Single tap just gives a voice over. pls help

    In my iphone6, voice over got switched on and screen got locked. Phone is not responding for slide but only responding for double tap. Phone is not accepting my passcode as I double tap in passcode screen. Single tap just gives a voice over. pls help me to unlock the screen and switch off voice over

    Thanks a lot Sted !! It worked

Maybe you are looking for

  • Dead SSD?

    Late 2013 rMBP froze < 2 months since delivery. Power down & restart gets flashing ?Folder? icon. Tried DU Verify via wireless Internet boot, Repair grayed-out. Tried Target Disk Mode via Thunderbolt-to-FW800 adapter (but not sure if my venerable Mac

  • Looking for a good kvm switch

    I am looking for a verry good one that will run. 2 comps. - 1 amd and 1 intel. - likely only 1 running at a time +1 monitor +1 keyboard +1 mouse +(w) sound - if necessary I could handle switching the speaker wires as they are not mixed in with the re

  • Please help me!!! error in run time about connecting ldap in Tomcat 4

    I had a class which used to connect to ldap which is bellow: import java.util.*; import javax.naming.*; import javax.naming.directory.*; public class ADLogin protected Hashtable env = new Hashtable(); String _hostname="sisqn074"; String _port="389";

  • Need Print  in webdynpro java

    Hi All   I had one more urgent requirement I need to put Print option in webdynpro java  for to give print the entire table So if the table have 30 records the entire records have to display with header details also please give your inputs Thanks Ren

  • Firefox crashes when aol mail is open

    When I read AOL Mail in firefox it crashes doesnt do it in I/E 8