Agent version 10.1.0.6.0 DB Control version 10.2.0.4 - Is this ok?

Hi,
dbconsole is failing to startup. We have already tried rebuilding the repository and still it won't start.
The agent does come up. One thing to point out is that the agent version that is reported by emctl status agent is 10.1.0.6.0
with a protocol version of 10.1.0.2.0
while dbcontrol(and the database are on version 10.2.0.4). Can the 10.1.0.6 agent work with 10.2.0.4? This setup
did work before but I think the repository rebuild may have caused some problems. The db was installed as 10.1.0.6
and then upgraded to 10.2.0.4 so the original repository build was likely on a consistent version.
Thanks

I see lots of connection refused messages in the emagent.trc file
Messages are of the form:
WARN snmehl_connect: connect failed to....
ERROR pingManager: nmepm_pingReposURL: Cannot connect to...
This isn't to surprising since dbconsole is not running.

Similar Messages

  • Agent Versions Incorrect?

    Good Afternoon,
    I have recently been given control of our SCOM infrastructure as the person before me has left and I've been given the reigns. We are currently running SCOM 2012 Service Pack 1 and have Cumulative Update 8 installed which is the latest CU available from
    Microsoft.
    I have been doing a bit of housekeeping today and noticed that the agent version that is installed on all of our clients is version 7.0.9538.0 which is the version that came pre-installed with 2012 SP1 when it was first released.
    The only server that does seem be on the latest build number is the Management Server which CU8 was installed on to manually. The build number is now 7.0.9538.1123.
    I know for a fact that our previous owner of SCOM installed every CU that has been released and I also remember that he went through the process of updating the clients on all our servers (almost 400).
    I have gone through the process of uninstalling some of the agents and reinstalling but I am unable to update it. We do also have a few servers that are running version 6.1.7221.49. This version is from May 2009 and was part of the SCOM 2007.
    I've noticed that if I log on to one of the servers that an agent is installed on after we ran the update for CU8 I can see that the file versions of the dll files do have the correct build number for CU8 (7.0.9538.1123)
    So from what I see it looks as though this is potentially a bug with SCOM. I'm not sure. How can I update the agent versions within the SCOM console to reflect the correct agent version.
    As you can see in the screenshot1 above the version for the servers with an agent here are still on 7.0.9538.
    In screenshot2 this is from one of the servers with an agent installed in the path of 'C:\Program Files\System Center Operations Manager\Agent'. As you can see the latest version is there but you can also see older versions too.
    Finally if I log on to the SCOM management server and open operations manager shell and run the command get-scomagent it gives me the same incorrect version. 
    I hope someone can help me with this.
    Regards,

    Yes, it´s normal and as expected. The version number 7.0.9538 reflects System Center 2012 SP1 Operations
    Manager and doesn´t change when applying a Update Rollup. If you were to upgrade to R2 then the version would be 7.1.10226.0 instead. 
    If there were older agents from a SCOM 2007 etc, the version number would match the SCOM version.
    Regards,
    Daniel
    IT Consultant at Viridis IT

  • DPM 2012 R2 UR2 and Windows 2003 SP2 Agent Version Issue

    Hi All, I have UR2 installed on my DPM 2012 R2 server and have followed Mike's guide on getting them protected:
    http://blogs.technet.com/b/dpm/archive/2014/06/11/details-on-protecting-windows-server-2003-computers-using-data-protection-manager-2012-r2.aspx
    The agents now show in the DPM console but display as needing an update and showing as agent version 4.1.3313.0 instead of 4.1.3441.0, which is odd.
    Servers have:
    .Net 3.5 Sp1 Full
    Visual C++ 2008 Redistributable - x86 9.0.30729.17
    From the DPM server:
    C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\agents\RA\4.2.1235.0\i386\1033\DPMAgentInstaller_Win2K3_i386.exe
    Executed:
    setdpmserver.exe -dpmservername DPMserverName
    From the DPM server:
    Attach-ProductionServer.ps1 script on the DPM server and refreshed twice
    What have I missed?

    Hi.
    Reboot your 2003 Server
    Run DPM Setup again on Server 2003
    Run setdpmserver.exe again
    click refresh in DPM Server
    worked for me
    Seidl Michael | http://www.techguy.at |
    twitter.com/techguyat | facebook.com/techguyat

  • How to find installed SMD Agent version?

    Hi,
    Please let me know how to find the installed SMD agent version in managed system.
    Thanks,
    Kavitha Rajan.

    Hello,
    Something really easy to differentiate the agents installed:
    -     7.01-> /usr/sap/SMD/JXX
    -     7.11 or 7.20 -> /usr/sap/DAA/SMDAXX
    Regards,
    Allam

  • Agent version differs from LMService

    Hi ,
    I am connecting a NW 7.31 Java system with solman 7.1 SP10 with SMD diagnostic agent for Manage system config set up
    I have installed the SMD agent and connected with central SLD & solman.
    In the agent connectivity it can be seen that the diagnostic agent is in pending status with the message " 7.10.1.0.2011070611153 Agent version differs from LMService"
    what could be the reason and what is LMService here.
    The system kernel version is 720_EXT.
    Please guide and provide a solution
    Thanks in advance

    Hi Daniel,
    Can you check LM-Service SP and Patch level.
    Also Refer the guided process as per these 2 KBAs.
    1962333 - Responsibility of individual steps in transaction SOLMAN_SETUP
    1931100 - "Agent version differs from LMService" Error in Solution Manager 7.1 Agent Administration
    Divyanshu

  • IS Diagnostics Agent Version 7.01 SR1 available?

    Hi,
    We have solution manager version Versions 7.0 EHP1 < SP20 so Diagnostics Agent Version 7.01 SR1 complies with the version of the Solution Manager system.
    But I can not find dowload available on market pla

    Looks like it is required. My version is 1.6

  • Search for all deployed agents version

    Hi,
    I want to list all (recent) deployed zcm agents to find out which computers need to be updated manually to the latest version. The reporting:
    Type Software Applications, focusing on General Software
    Columns Product Manufacturer
    Product Name
    Product Version
    Instances (Summary)
    Product
    Machine Name
    Criteria Device Is Retired = No and
    Product Is Deleted = No and
    Product <= Novell ZENworks Adaptive Agent 11.3.2.47407 and
    Product >= Novell ZENworks Adaptive Agent 11
    ==> doesn't show correct results as some devices are reported as old version but in fact the latest agents version has been installed. What option are useful to find the installed agents versions?
    All the best, Ralf

    Is your Zone Setup to Auto-Rename Devices when the machine name changes?
    I wonder if the issue is that the "Machine Name" may not match "ZCM Device Object Name"
    You may even have Dupe "Machine Names" so that while you think it is updated, it is not because it is actually a different machine than you expected.

  • Report Agent version

    Hi all,
    is it possible that I can get a report about the ZCM Agent version from my clients? I want to know how many clients are online with the old (10.1.0) version....
    GerritRoss

    Originally Posted by gerritross
    Hi all,
    is it possible that I can get a report about the ZCM Agent version from my clients? I want to know how many clients are online with the old (10.1.0) version....
    GerritRoss
    For all how have the same question: You can create dynamic groups in the workstation section. There you can choose Workstation Agentversion. So it is easy to get these information!
    Greets

  • 11g: New agent versions at download-area

    Hello,
    how can i put new agent versions at our download area on grid control server?
    Acutally we have a grid control server verison 11.1.0.1.0 and all agent versions for deployment are 11.1.0.1.0 or older. But i want to install agent version 11.1.0.7.0. What i have to do therefore?
    Regards,
    Heike

    The staging area in <OMS_HOME>/sysman/agent_download/<version> is only for staging base versions of the agent.
    If you want to deploy an agent with patches (e.g. agent version 11.1.0.1.0 with PSU 5 applied), you can apply the desired patches to an existing agent and then clone it. For more information on cloning an agent, please see:
    http://docs.oracle.com/cd/E11857_01/install.111/e16847/clone_agent_usng_zip.htm#BABHBJJA
    By the way, agent version 11.1.0.7.0 is not available.
    Regards,
    - Loc

  • Cisco Secuirty agent version 5.2

    I installed the cisco security agent version 5.2 on my windows xp machine, i am not in a server enviroment only at home. i go to control panel and try to remove it does nothing and then i try from the program files and try there nothing how do i get this off my system

    I started it and right click and yes i can turn it off and i can also just disabled the service under services? but that is not what i wnat to do i want to remove it off my system. i was simply curious about what this was and i really dont understand what it does, i know its for a client server architecture but what else is it for.

  • When I try to open Firefox 3.6 (Mac) by clicking on the icon, I get this message: "Close Firefox: A copy of Firefox is already open. Only one copy of Firefox can be open at a time." I've removed older versions and restarted, but still get this message. Wh

    I've just downloaded Firefox 3.6 (Mac). When I attempt to open, this message pops up: "Close Firefox: A copy of Firefox is already open. Only one copy of Firefox can be open at a time." I've removed older versions and restarted, but still get this message. What's going on?
    == This happened ==
    Every time Firefox opened
    == after I downloaded the latest version. ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    You might find your solution in [http://kb.mozillazine.org/Profile_in_use this article].

  • Why GWt suggest box is not working in the latest versions of Firefox ? It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

    Why GWt suggest box is not working in the latest versions of Firefox ?
    It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

    jbren wrote:
    I repeatedly have problems with playback on my STB's. Go thru all the motions, inhouse agent, fix multi room dvr problems. Unplug unit, unplug dvr, etc. etc. etc.  The DVR'd show will play on the DVR but not on the STB's. What's up with that?
    Sorry to hear the auto fix suggested early did not fix your problem. So we can get more information from you, I have copied your post to our private support board. Please refer all correspondences to there from here on out. You can easily get to the private support one of two ways. In the email you signed up for the forums with, you will receive a link to click on. Make sure you are already signed into the forums before clicking on this link. Another way of getting there is by clicking on your username anywhere you see it in the forums. This brings you to your account profile. Scroll down to the section labeled "My Support Cases" . In there you will see the link to your case.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • No JRE version found in launch file for this system

    Hi,
    I have an application which is launched by JWS.
    When we use JWS from 1.4, it runs fine. But JWS from 1.5.0_15 gives the error "No JRE version found in launch file for this system"
    In both the JWS(1.4 and 1.5.0_15)cases, we install JRE1.5.0_15 using the installer and used for invoking the application.
    We invoke mailclient.jnlp, which inturn invokes the installer.jnlp and KanaJreInstaller.asp
    <<mailclient.jnlp>>
    <?xml version="1.0" encoding="utf-8"?>
    <jnlp
    spec="1.0"
    codebase="http://mpshanmu-gx520:80/10r3/"
    href="mailclient.jnlp">
    <information>
    <title>KANA Agent</title>
    <vendor>KANA Software, Inc.</vendor>
    <homepage href="http://www.kana.com"/>
    <description>KANA Suite 10.3.0</description>
    <icon href="images/mail_logo.gif"/>
    <offline-allowed/>
    </information>
    <security>
    <all-permissions/>
    </security>
    <resources>
    <j2se version="KANA1.5.0_15" href="KanaJreInstaller.asp"/>
    <jar href="lib/mailclient_s.jar"/>
    <jar href="lib/link_s.jar"/>
    <jar href="lib/spell_s.jar"/>
    <jar href="lib/ssce_s.jar"/>
    <jar href="lib/kc_framework_s.jar"/>
    <jar href="lib/kc_sharedGUI_s.jar"/>
    <jar href="lib/xalan_s.jar"/>
    <jar href="lib/xerces_s.jar"/>
    <jar href="lib/java2com_s.jar"/>
    <jar href="lib/jgl3.1.0_s.jar"/>
    <jar href="lib/rsrcbundle_s.jar"/>
    <jar href="lib/response_s.jar"/>
    <jar href="lib/HTMLEditorEnterprise_s.jar"/>
    <jar href="lib/jakarta-oro-2.0.4_s.jar"/>
    <jar href="lib/jdic_s.jar"/>
    <extension name="Sun Libraries" href="sunextensions.jnlp"/>
    </resources>
    <resources os="Windows">
    <nativelib href="lib/windlls_s.jar"/>
    <nativelib href="lib/jdic-native.jar"/>
    </resources>
    <application-desc main-class="kana.mail.wkstn.AppMain">
    <argument>-serverlist</argument>
    <argument>http://mpshanmu-gx520:80/10r3/servers.xml</argument>
    </application-desc>
    </jnlp>
    <<KanaJreInstaller.asp>>
    <%@ language="vbscript"%>
    <%
    Response.ContentType="application/x-java-jnlp-file"
    Response.AddHeader "x-java-jnlp-version-id","KANA1.5.0_15"
    dim fs,f,ts
    set fs=Server.CreateObject("Scripting.FileSystemObject")
    Set f=fs.GetFile("C:\Program Files\KANA\KANA Response Web Server_10r3\installer.jnlp")
    Set ts=f.OpenAsTextStream(1)
    Response.Write(ts.ReadAll)
    ts.Close
    set ts=nothing
    set f=nothing
    set fs=nothing
    %>
    <<installer.jnlp>>
    <?xml version="1.0" encoding="utf-8"?>
    <jnlp
    spec="1.0"
    codebase="http://mpshanmu-gx520:80/10r3/"
    href="installer.jnlp">
    <information><title>KANA J2RE 1.5.0_15 Installer</title>
    <vendor>KANA Software, Inc.</vendor>
    </information>
    <security>
    <all-permissions/>
    </security>
    <resources>
    <j2se version="1.3+"/>
    <jar href="lib/installer.jar"/>
    <jar href="lib/JRE_KANA1.5.0_15.jar"/>
    <property name="jre.container" value="JRE_KANA1.5.0_15.jar"/>
    <property name="jre.execute" value="bin\\javaw.exe"/>
    <property name="jre.version" value="KANA1.5.0_15"/>
    </resources>
    <installer-desc main-class="JREInstaller"/>
    </jnlp>
    Thanks

    >
    We are using sun JRE(1.5.0_15) only. We extract Sun JRE and build it as KANAJRE.jar and signing.>I have never heard of KANAJRE. Would you care to post a link to the site, or should we just keep guessing? (My patience for random guesses is running out.)
    >
    We install using Intaller class and that is getting listed in the Java Control panel and enabled too.>List as what?
    Does it list it with the entire string "KANA1.5.0_15" or is is just listed as "1.5.0_15"?
    Because this line from the JNLP file..
    <j2se version="KANA1.5.0_15" href="KanaJreInstaller.asp"/>..had me convinved it was a non-Sun JRE. Not so much the href, but most especially the version attribute.
    If it really is the Sun JRE, I would expect this to work.
    <j2se version="1.5.0_15" href="KanaJreInstaller.asp"/>And as an aside. If this installer is giving you trouble and the app. requires the 1.5.0_15 JRE, why not simply the default Sun JRE installer? What advantages do you think this installer offers?

  • When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)" I have installed the latest version of iTunes but still get this message. Can anyone help.

    When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)". I have installed the latest version of iTunes but still get this message. Can anyone help?

    Hello mustangcim243,
    iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    If the above does not resolve your issue, I recommend we reset the SC Info folder:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    (See Step 4: Remove the SC Info folder)
    Thanks,
    Matt M.

  • "You cannot use this version of the application Mail with this version...

    I recently needed to replace my hard drive and now when I try to open the Mail application I get the following message: "You cannot use this version of the application Mail with this version of Mac OS X."
    Any help is appreciated.

    ANSWERING MY OWN POST:
    I have tried reinstalling Mail from my Snow Leopard upgrade disk directly and tried it using Pacifist. Neither worked because both simply reinstalled version 4.0. Fortunately, I have a MacBook Pro and it has version 4.1. I copied this directly, which was not ideal (it was quite confused about my mailboxes), but it worked.
    The problem is that +Software Update+ did not detect the old version of Mail and Apple does not provide a direct way (that I could find) of downloading the latest version. Each time I downloaded Mail from Apple, it was version 4.0.

Maybe you are looking for