Agent version differs from LMService

Hi ,
I am connecting a NW 7.31 Java system with solman 7.1 SP10 with SMD diagnostic agent for Manage system config set up
I have installed the SMD agent and connected with central SLD & solman.
In the agent connectivity it can be seen that the diagnostic agent is in pending status with the message " 7.10.1.0.2011070611153 Agent version differs from LMService"
what could be the reason and what is LMService here.
The system kernel version is 720_EXT.
Please guide and provide a solution
Thanks in advance

Hi Daniel,
Can you check LM-Service SP and Patch level.
Also Refer the guided process as per these 2 KBAs.
1962333 - Responsibility of individual steps in transaction SOLMAN_SETUP
1931100 - "Agent version differs from LMService" Error in Solution Manager 7.1 Agent Administration
Divyanshu

Similar Messages

  • Pacman kernel version different from abs tree

    I've started using Arch Linux since last week, switching from Ubuntu, and I must say, I'm impressed. I've been using Gentoo on another system for a while, and I wanted the power of Gentoo, without the compiling, which actually is what Arch is providing.
    I've installed a i686 system, but I have 8Gb of memory so I've compiled my own kernel with HIGHMEM64G=yes.
    When I updated my system today, I got a new kernel package from pacman: 3.1.3-1.
    But when I rebuild my kernel using abs, I get 3.1.2-1.
    Shouldn't these versions be the same? I've tried different mirrors to sync my abs tree, to no effect. Am I missing something?

    Ok, thanks, then I know what's going on.
    How can I use a 64bit kernel with a i686 install? That might be easier than recompiling my kernel each time. What about nvidia module and virtual box modules? I had to recompile these myself as well after I compiled my own kernel.
    Sure, if I had to reinstall, I'd go 64bit all the way; though I now have my system full up and running and configured so I'm not really looking forward reinstalling right now. I chose i686 not for a particular reason, I just assumed there would be a pae enabled kernel, but unfortunately there isn't one in the official repositories.

  • Is the aperture 3 trial version different from the original?

    Hello,
    I am working on organizing my photos trying out the aperture 3 trial version. I'm thinking of getting the original one but before I actually organize my libraries I want to know if there are any differences I should know about that might affect my work launching the original version. Also, does the original work the same with the Duplicate Annihilator?
    Thanks in advance!

    The trial version is a fully functional version of Aperture. If you decide to continue on with it you can just authorize the trial copy once you get our key. The only difference is the name of the default library the trail and non-trial versions create. But you can always rename the library if you wish.
    All this applies to the CD version, if you eventually buy from the App Store I'm not sure what the procedure would be. But in any case the library created with the trial should be useable by the App Store version.
    One thing to keep in mind, if you add images to the trial version and use it then decide not to keep Aperture you'll be able to retrieve your master files but any changes made will be lost.

  • Why is the public Flash Player download version different from the SDLA download site?

    Since last month, FP 11.1.102.55 has been available for the public to download and install. But the http://www.adobe.com/products/flashplayer/fp_distribution3.html still has 11.0.1.152.
    What gives?

    All downloads at http://www.adobe.com/special/products/flashplayer/fp_distribution3.html are 11.1.102.55
    Maybe you have a cache somewhere from where you still obtain an old cached version?

  • Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the same version and product ID.

    I am facing this problem while start debugging the Provider-Hosted app through VS2013. I want to deploy the app with same version. So please let me know any solution
    to remove the app instance from office365 online, so that I can deploy the same app with same version on the specified "Developer Site".
    Note: If I change the version in AppManifesst.xml file then this problem/error gets resolved. But I want to deploy with the same version as
    per my business requirement.
    The actual error renders while I click to "Start" button of the Visual Studio 2013 to deploy the provider-hosted app, for the sake
    to deploying it on say "ABC" site collection (i.e. developer site). I work on office365 online. Therefore, request you to please provide the solution for SharePoint online office 365. The occurrences is:
    "Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the
    same version and product ID."
    Please assist me anyone. It will be so kind of you.....
    Naveen Kumar
    Steria India Ltd.

    Did you updated the  AppManifest.xml file
    and change the version.
    If this helped you resolve your issue, please mark it Answered

  • I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would ve

    I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would very much like to download a Mac version, so please send my correct web link. By the way my s. number for Lightroom 5 up is [removed], and I also have s.number for 4 up and 3 full.

    The latest non-CC version of LR 5 is 5.7.1 and download links are available on the Adobe Updates page:
    http://www.adobe.com/downloads/updates/
    Both Mac and Win links are there.
    If you are asking for a LR 5 CC link, which wouldn't require a serial number, please be more clear about that.

  • Content Transfer - M version is different from A version

    Hi All,
    I am new to BI 7.0 and when i am trying to transfer some cubes from the Bi content to the infoarea; though the cubes are getting transffered successfully but i am getting the message that " M version is different from A version". Does this message makes any difference on the functionality of the cube??
    Also all the infoobjects of the cube are in a Inactive status. Please provide a solution to it.
    Thanks and regards,
    Ankur Agarwal

    A Version - Active version
    D version - SAP delivery version
    M version - Modified version
    Here is a link that describes BI Content Versions:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    Message was edited by: Newbie
            Newbie

  • Modified version is differant from active for ds in test system

    Modified version is differant from active version in test system for ds 0FI_AA_12 (unequal sign close to ds).
    Once I try to load data to PSA , the system generates the following error :
    ds is not replicated
    I replicated ds many times , re-transported it but nothing helps

    Hi,
    After you replicate the datasource,it will become inactive and so you need to activate it again.
    Always replicate first and then activate.
    Hope it clarifies

  • The version of the LabVIEW NI SoftMotion Module installed on the host differs from the version installed on the RT target.

    Hi,
    i got this problem when i want to deploy the project with softmotion 
    https://www.dropbox.com/s/at9r9w667i00qja/qqqqqq.png
    NI SoftMotion:  The version of the LabVIEW NI SoftMotion Module installed on the host differs from the version installed on the RT target. 

    Hi Eng.Tareq
    It would be better if you can give more information
    1. What is the software version are you using?
    2. What is your target hardware?
    You can check the above information by open MAX -> under software tab of both computer and you target
    I suspect that the software version of your host computer and the target is difference as state in the picture attached.
    TuiTui

  • I cannot get my messages/text messages to work om my Hi.  I am sending this thru my iPad.  Respond and let me know you got it.  Fun fun fun.  .  I did go and try to another Apple ID different from my iPhone but it still will not work.  Can anyone help me?

    I cannot get my messages/text messages to work om my Hi.  I am sending this thru my iPad.  Respond and let me know you got it.  Fun fun fun.  .  I did go and try to another Apple ID different from my iPhone but it still will not work.  Can anyone help me?

    chicx wrote:
    This is the third time of writing this on your Apple Support Communities!
    Not with your current user id.
    Far too much uneccesary information in your post, which only confuses things, a vast amount!
    Let's start with iTunes.
    Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
    With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
    Once you have doen those two things, check to see if the iPod is seen by iTunes.
    chicx wrote:
    By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
    Really?
    OS stands for Operating System. (In computer speak, IO means Input/Output.)
    iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
    I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

  • Print layout is different from the working view.

    I got two calendars in iCal, marked with red and green. I always make the green ones as the first one on everyday and the red ones as the second. However, when I printed the scheduled month, some red ones were in the upper positions and it looked different from my screen.
    How can I make all the green ones as the first event in the printed version.

    You can make objects visible only on the screen by selecting Object => Presence => Visible (Screen Only). You can do the same for printing by selecting the Visible (Print Only) option.
    Hope this helps,
    Mike

  • Set version string from a shared file in App Builder

    I am upgrading my applications to use the new LabVIEW 8.0.1 Pro env. I am getting used to the new App Builder features and I like what i see. However... i am having a couple of issues...
    1. I now have to change build number in both my About_Dialog.vi AND in the build properties.
    2. I now have to change the build number for EACH binary i build, EACH time i build.
    Is there a way to, at build time, read a file to set the version string? IE. Can i have a text file that is called fileversion.txt or something and have it be read to populate the build version?
    Is there a way to have a pre/post build script that can be run to set parameters/configs using the 8.0 App Builder?
    The primary reason for this is that since i cannot use a command line option to build my executables, i would at least like to simplify it to be able to use a simple mouse clicker app. However the version info has to change with each build and that increases the complexity of the script 10 fold. Alternatively, is it possible to remove the version info from the binary? I like the feature a lot, but my customers are going to get confused if the about dialog says something different than the binary properties.

    Hello Plexsys,
    With LabVIEW 8.0, in the project explorer you can have VIs targeted to multiple devices. This is where to conditional disable structure comes into the picture. With this structure it possible at runtime to disable a section of the code depending upon the target on which this VI is running.
    Besides working with multiple targets (using the Target Type symbol), you can also define your own symbol. This way a VI can behave differently when used in conjunction with different projects. You can define the symbol for a project by right clicking on the Project (in project explorer) and selecting “properties”. This way, if a specific VI is moved over from one project to the other (with a different symbol value), then it would behave differently. If a project does not contain one of the symbol values, then the default case would be executed.
    You can always refer to LabVIEW help for more information on the conditional disable structure.
    At this moment I don’t think that the conditional disable structure could provide you with the functionality that you are looking for.
    Regards,
    Chetan K
    Application Engineer
    National Instruments

  • In the info bar at the bottom of the iphoto window, why is the number of items different from the total

    In the info bar at the bottom of the iphoto screen, why is the number of items different from the total?

    What version of iPhoto and system are you running? What mode are you in, i.e. Events, Photos?
    If it's the Photos mode the number at the bottom will represent the number of photos displayed in that mode or the number of photos selected in that mode. The number will match the number next to the photos mode only when there are no photos in that mode that are selected. 
    If you click on the Events icon and then back on the photos icon the numbers should match.
    OT

  • When I insert a photo from iPhoto into my iMovie, the photo that appears in the movie is different from the one that I inserted - why is this and how can I make it work properly?

    When I insert a photo from iphoto into imovie, the photo that appears is different from the one that I inserted.  Why is this and how can I make it work properly?

    WHat version of iMovie, and iPhoto?
    THIs forum is for iMovie iOS (iPads, iPhones).
    Are you talking about iMovie for Mac?

  • After release the release version different than debug version ????

    Hello guys,
    I am having a HUGE issue with my release build version of my application, when i run my application through eclipse it runs perfectly, however after making a release build of the application and running it behaves different than the version run from eclipse ???????? has anyone ever had this problem before and if so what can you do to prevent this behavior. thank you for any advice on this issue

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!
    Thank you.

Maybe you are looking for