Agent12c on different platforms (without SelfUpdate)

Hi
Is there a way to install an agent other than one on which my Management Service runs ?
SelfUpdate is not configured in my oms server since internet access is disabled.

Yes. Please refer the section "Acquiring Management Agent Software in Offline Mode" from the below doc
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/self_update.htm#CACFAIFI
You can download the platform sar from the below url.
http://www.oracle.com/technetwork/oem/grid-control/downloads/agentsoft-090381.html

Similar Messages

DB Copy / to a different platform on 9i R2

Hi,
is it possible make a database copy(using unix cp) on 9i R2:
from platform: HP-UX pa-risc 64 bit // Big Endian
to AIX5L 64bit // Big Endian
or this is only possible using imp / exp utilities.
Thank you,
D.

or this is only possible using imp / exp utilities.It may be possible to copy the database through different platform without imp/exp.
Steps:
1. install oracle10g software in HP-UX
2. upgrade your original database to 10g
3. install oracle 10g software in AIX5L
4. use TTS to clone your databases in 10g version.
5. downgrade to 9iR2 if you want.
HTH

I recently got a MacBook Pro and was interested in downloading Lightroom that I had previously purchased however there is no disk drive on my pro so was wondering if it is possible to download a different way without having to purchase the program again?

I recently got a MacBook Pro and was interested in downloading Lightroom that I had previously purchased however there is no disk drive on my pro so was wondering if it is possible to download a different way without having to purchase the program again?

Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

My computer crashed. So does this mean I can not add any more music to my ipod from a different computer without all the songs being erased? Can I sync my ipod to a new computer if I allow all the songs to be erased?

My computer crashed. So does this mean I can not add any more music to my ipod from a different computer without all the songs being erased? The ipod works fine and now i got a new computer. So it seems like my only options are leaving my ipod in a state where i cant add anymore songs or erasing all my songs and trying to use my ipod from my new computer. Can someone please inform me on how to have my ipod work from a different computer, even if i have to erase my songs. Thanks.

Yes, if you choose the Erase and Sync option (or restore your iPod) you will be allowed to sync your iPod with the new computer.
If you would like to save the content that's currently on your iPod, see this older thread from another forum member Zevoneer discussing the different ways to copy the content on an iPod back to your PC.
https://discussions.apple.com/thread/2417169?start=0&tstart=0
B-rock

How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore. Please help with proper steps, if any.

How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
Please help with proper steps, if any.

Also see... these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141

Install oracle 10g on solaris 9 platform without setting noexec_user_stack

Hi,
I'd like install oracle 10g software on solaris 2.9 platform without setting noexec_user_stack parameter to 1.
The problem is that i need install software before, for migrating product environment.
I can write /etc/system file but i can't reboot system until several days.
I will not start migration process until i reboot the system and parameter definitely set.
Do you know if we will can have any kind of problem???
Thanks in advance.

Thanks for your answer FZheng. But i will just install software. I will not start any oracle 10g process until i reboot the machine.
I think that oracle software installacion should not be affected. Do you know if this parameter affect to compile softwere during OUI wizard progress???.
Before going on migration process and start database i will sure that this parameter is correctly fixed.
PD.: I couldn't read metalink reference that you've suggested becouse my metalink account have problem access in this momment. During all day i've been reeding metalinks docs without any problem until this momment, bad luck.
In test environment i've installed oracle without this parameter and i've never had any problem. But this installation is more important than others becouse i ask you in this specialist forum.
Thanks again !!!

Urgent! Application tier and Data tier on different platforms

Hello!
I would be very grateful if someone confirms that the deployment of the Beehive, where Application tier and Data tier are placed on different platforms, is supported.
For example, Oracle Database (Data tier) on Linux, and Oracle Application Server (Application tier) on Windows.
Thanks in advance.
Dima.

Hi Dima,
Yes, this will work.

Building and Deploying Java applications in different platform (OS)

Hi all,
We currently have a J2EE based web services application that is built (compiled) and deployed on Windows 2000 Advanced server. But in future, we will be using WIndows 2000 server for development only and HP-UX for production.
So, we are planning on executing the build (compilation) of our application on Windows 2000 server and deploy the same binaries (WAR) on HP-UX also. So, I wanted to know anyone has faced issues in the past by deploying an application on a different platform than the one on which it was compiled. Is it recommended by SUN to compile and build Java applications on the same platform on which the application is deployed.
Note that in my case, the JVM versions between Windows server and HP-UX would be the same. But the JVM for Windows server has been provided by Sun and the JVM for HP-UX has been provided by HP-UX.
Your inputs are greatly appreciated.

Well, it's all Java, right? So what's the problem? Since the JVM for HP-UX isn't made by Sun, so there could be compatibility problems, but I would expect that would be minimal if a problem at all. But you can't know unless you run it.
I don't know about building on the different systems. Java's supposed to be write once, run anywhere.... The byte code should be compatible no matter what. I've never heard of Sun saying "compile it on each platform". If the HP JVM isn't going to like bytecode compiled on Windows or another OS, then something isn't kosher with someone's JVM or compiler.

Adobe Pro on 2 different platforms?

Why is it not possible to install Adobe Pro on 2 different platforms? It allows me to install on 2 computers but not 2 platforms? I'm having issues understanding why I'm not allowed to install on 2 computers regardless of the platform.

It's an issue because they chose to do it that way, and sell serial numbers which work on Windows, or Mac. They make the rules. You won't find Adobe here defending or commenting on their policies.
Allowing two computers is more generous than some companies.
I've heard it said that, if you subscribe instead, because you don't get a serial number, you can have one Windows and one Mac.

Work Item redirected to different approver without substitution

Hi All,
We are facing an issue for Purchase Order Approval Workflow whereas Work Items are going to different approver without substitution is activated.
Regards
Chayan

Hello,
Look in the workflow log (SWI1), it will tell you exactly what happened.
Is it possible they were forwarded?
regards
Rick Bakker

How to apply metrics for different platform

Hi,
If a metric has different code for different platform, or the metric only runs on some specific type of system, how can we apply it to a group of hosts?
For example, I have a metric that checks only Sun T3 types of systems. I can create a group of hosts that are T3 type system, but how do I apply the metric to this group?
The other example is the way to collect data is different for Soaris and Linux platform, can I have 2 metrics, one apply to the group of Solaris machines, and the other apply to the group of Linux machines?
Thanks.

Hi,
You can use EM groups and monitoring templates to accomplish what you want to do. For example, create a group for Solaris hosts and a template to push out appropriate metric settings for the group.
Documentation links:
- EM groups:
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/group_management.htm#DAFHBFCB
- Monitoring templates:
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/monitor_overview.htm#sthref38
Regards,
- Loc

LabVIEW Embedded - Performance Testing - Different Platforms

Hi all,
I've done some performance testing of LabVIEW on various microcontroller development boards (LabVIEW Embedded for ARM) as well as on a cRIO 9122 Real-time Controller (LabVIEW Real-time) and a Dell Optiplex 790 (LabVIEW desktop). You may find the results interesting. The full report is attached and the final page of the report is reproduced below.
Test Summary
µC MIPS
Single Loop
Effective MIPS
Single Loop
Efficiency
Dual Loop
Effective MIPS
Dual Loop
Efficiency
MCB2300
65
    31.8
49%
      4.1
6%
LM3S8962
60
    50.0
83%
      9.5
16%
LPC1788
120
    80.9
56%
    12.0
8%
cRIO 9122
760
152.4
20%
223.0
29%
Optiplex 790
6114
5533.7
91%
5655.0
92%
Analysis
For microcontrollers, single loop programming can retain almost 100% of the processing power. Such programming would require that all I/O is non-blocking as well as use of interrupts. Multiple loop programming is not recommended, except for simple applications running at loop rates less than 200 Hz, since the vast majority of the processing power is taken by LabVIEW/OS overhead.
For cRIO, there is much more processing power available, however approximately 70 to 80% of it is lost to LabVIEW/OS overhead. The end result is that what can be achieved is limiting.
For the Desktop, we get the best of both worlds; extraordinary processing power and high efficiency.
Speculation on why LabVIEW Embedded for ARM and LabVIEW Real-time performance is so poor puts the blame on excessive context switch. Each context switch typically takes 150 to 200 machine cycles and these appear to be inserted for each loop iteration. This means that tight loops (fast with not much computation) consume enormous amounts of processing power. If this is the case, an option to force a context switch every Nth loop iteration would be useful.
Conclusion
LabVIEW Embedded
for ARM
LabVIEW Real-time for cRIO/sbRIO
LabVIEW Desktop for Windows
Development Environment Cost
High
Reasonable
Reasonable
Execution Platform Cost
Very low
Very High / High
Low
Processing Power
Low (current Tier 1)
Medium
Enormous
LabVIEW/OS efficiency
Low
Low
High
OEM friendly
Yes+
No
Yes
LabVIEW Desktop has many attractive features. This explain why LabVIEW Desktop is so successful and is the vast majority of National Instruments’ software sales (and consequently results in the vast majority of hardware sales). It is National Instruments’ flagship product and is the precursor to the other LabVIEW offerings. The execution platform is powerful, available in various form factors from various sources and is competitively priced.
LabVIEW Real-time on a cRIO/sb-RIO is a lot less attractive. To make this platform attractive the execution platform cost needs to be vastly decreased while increasing the raw processing power. It would also be beneficial to examine why the LabVIEW/OS overhead is so high. A single plug-in board no larger than 75 x 50 mm (3” x 2”) with a single unit price under $180 would certainly make the sb-RIO a viable execution platform. The peripheral connectors would not be part of the board and would be accessible via a connector. A developer mother board could house the various connectors, but these are not needed when incorporated into the final product. The recently released Xilinx Zynq would be a great chip to use ($15 in volume, 2 x ARM Cortex A9 at 800 MHz (4,000 MIPS), FPGA fabric and lots more).
LabVIEW Embedded for ARM is very OEM friendly with development boards that are open source with circuit diagrams available. To make this platform attractive, new more capable Tier 1 boards will need to be introduced, mainly to counter the large LabVIEW/OS overhead. As before, these target boards would come from microcontroller manufacturers, thereby making them inexpensive and open source. It would also be beneficial to examine why the LabVIEW/OS overhead is so high. What is required now is another Tier 1 boards (eg. DK-LM3S9D96 (ARM Cortex M3 80 MHz/96 MIPS)). Further Tier 1 boards should be targeted every two years (eg. BeagleBoard-xM (ARM Cortex A8 1000 MHz/2000 MIPS board)) to keep LabVIEW Embedded for ARM relevant.
Attachments:
LabVIEW Embedded - Performance Testing - Different Platforms.pdf ‏307 KB

I've got to say though, it would really be good if NI could further develop the ARM embedded toolkit.
In the industry I'm in, and probably many others, control algorithm development and testing oocurs in labview. If you have a good LV developer or team, you'll end up with fairly solid, stable and tested code. But what happens now, once the concept is validated, is that all this is thrown away and the C programmers create the embedded code that will go into the real product.
The development cycle starts from scratch.
It would be amazing if you could strip down that code and deploy it onto ARM and expect it to not be too inefficient. Development costs and time to market go way down.. BUT, but especially in the industry I presently work in, the final product's COST is extremely important. (These being consumer products, chaper micro cheaper product) .
These concerns weight HEAVILY. I didn't get a warm fuzzy about the ARM toolkit for my application. I'm sure it's got its niches, but just imagine what could happen if some more work went into it to make it truly appealing to wider market...

Output from same script on two different platforms produce different outputs.

I'm running a command prompt script on two different platforms (Windows 7 desktop and a Microsoft Server 2008 R2 Enterprise platform) and the output the script produces is different on each platform.
Specifically; the script is
For /f "tokens=2-4 delims=/ " %%a in ('date /t') do (set mydate=%%c-%%a-%%b)
For /f "tokens=1-2 delims=/:" %%a in ('time /t') do (set mytime=%%a%%b)
echo %mydate%>> log.txt
echo %mytime%>> log.txt
and the output from the Windows 7 desktop is:
2014-07-31
0249 PM
While the output from the 2008 server is:
ECHO is on.
0249 PM

Hi Dave,
There's some very good learning resources here:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Also, there's a script repository full of examples you can learn from and tweak to meet your needs here:
http://gallery.technet.microsoft.com/scriptcenter
As an additional suggestion, I'd highly recommend upgrading PowerShell on Win7 and WS2008R2 to v4. v2 was okay, but v4 makes life much easier (make sure you read the system requirements first though, there's still a few incompatibilities):
http://www.microsoft.com/en-us/download/details.aspx?id=40855
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Basic Question about Different Platforms & their Versions

Hi Experts!!
Can any one help me to understand.
Q 1 : What all are the Different Platforms to design apps for SAP?
Q 2 : What make them different with each other?
Q 3 : What are the Different version available in market?
Q 4 : What is the best among all to start with for a New Learner?
Regards
Devraj

I am assuming you are talking about MOBILITY platform? right ?
You must check this discussion Where to start for Developing Mobile Apps

Data guard between different platforms?

I'm pretty sure the answer is no but just want to be sure, so my question is...Can you have a data guard physical standby server that is running on a different platform than the primary?
For instance, We have just been informed by our sakes rep that Oracle is dropping the Itanium platform because future releases of red hat will no longer be supporting the Itanium platform and that Oracle is following the red hat model...
Can we setup dataguard to migrate off of current hardware platform to a new X86_64 platform?
Thanks.

user520056 wrote:
I'm pretty sure the answer is no but just want to be sure, so my question is...Can you have a data guard physical standby server that is running on a different platform than the primary?No, this is not possible.
For instance, We have just been informed by our sakes rep that Oracle is dropping the Itanium platform because future releases of red hat will no longer be supporting the Itanium platform and that Oracle is following the red hat model...
Can we setup dataguard to migrate off of current hardware platform to a new X86_64 platform?
Thanks.This would follow the same rule that both, primary and standby must run on the same platform and o/s. So I guess, the answer would be that you would need to move both of your servers. But, just to be assure, you should raise the same question on the dedicated forum of dataguard where product manager of DG , Larry Carpenter hangs around as well. That would be the place where I would ask my data guard doubts.
Data Guard
HTH
Aman....

Agent12c on different platforms (without SelfUpdate)

Similar Messages

Maybe you are looking for