Agentry Server Communications error (14)

Hi All,
We are trying to use WPF client for testing the application,
but we were getting the below error message
To resolve that we used the local certificate generated by using steps mentioned in the below link
   http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01930.0233/doc/html/fre1383608304168.html
After installing new certificate we are getting below communication error in ATE and as well as in WPF client:
before installing local certificate Application was working fine in ATE
Message:
Requesting Public Key from Server
Communications error (14)
Connection failed
Ending transmission
Please guide me to resolve the issue
Regards,
Lekhak Patil

Hi  Steve,
We got the same issue working with WPF client  , Hence we upgraded the SMP server 2.3 from SP00 to SP03 .
At present the Server is SMP 2.3 SP03  but we have not installed any certificate.
Again when trying to connect to server we got the Communication error(14) error.
Do we need to install the certificate again ?
Please let us know the exact process of installing and working with WPF client with SMP 2.3 SP03
Thanks
Neha

Similar Messages

  • SQL22212N  A DB2 Administration Server communication error

    Hi All,
    I have DB2 9.1 installed on Suse linux 10.1 with manual storage management.
    When i try to access Db2 using control center in particular when i try to access the tablespaces to create new containers it throws me this error.
    SQL22212N  A DB2 Administration Server communication error has been detected. Client system: "172.18.xxx.xxx". server system "172.18.xxx.xxx". (Both these ip address are same).
    but, I am able to add new containers through DBACOCKPIT in SAPgui.
    I tried the steps as told by some IBM references (creating tools catalog) to the above problem
    http://www-01.ibm.com/support/docview.wss?rs=71&context=SSEPGG&dc=DB560&dc=DB520&uid=swg21193257&loc=en_US&cs=UTF-8&lang=en&rss=ct71db2
    I am unable to create tools catalog due to this same error.
    Help me how to proceed with respect to this issue.
    Your response is warmly appreciated.
    regards,
    chandru.

    Hi Beck,
    Thanks for your reply.
    To be specific I am able to start and stop DB2 from db2<sid>.
    when i try to create a DAS it showing as the
    DBI1064E The user db2<sid> is being used by the DB2 instance and thus can not be used to create the DB2 admininstartion Server
    Please help me how to proceed.
    regards,
    chandru.
    Edited by: Chandru on Oct 22, 2008 2:35 PM

  • Server communications error when trying to edit a content query

    Hi.
    I get an error when I try to edit a content query for a placeholder in Workshop. I open a placeholder (in data->placeholders) and select "content search" in the content query box. The "Content Search" box pops up but I get an error requester ("Server Communications Error") saying "Content properties cannot be retrieved from the server".
    I've ensured that the server is running and I've checked the server settings, but I haven't been able to find anything that would explain this error.
    Any suggestions?
    Regards,
    Kjell V. Normann

    From Workshop, in the Application tab, right-click on
    wps-toolSupport.war under Modules, and select Set Context Path. Enter
    ${appname}Tool, ${appname} is the name of you application. Workshop
    should use that context-root from then on, and then the placeholder
    editor should be able to find the WebService it needs.
    Greg
    Kjell Normann wrote:
    Hi.
    I tried this, but it didn't work either. Upon redeployment it
    actually removed the edited <module> section and replaced it with the
    original:
    <module> <web> <web-uri>wps-toolSupport.war</web-uri>
    <context-root>wps-toolSupport</context-root> </web> </module>
    Regards,
    Kjell V. Normann

  • Window server communication errors

    I'm working in a rander farm environment where our xserves use Shake to generate quicktimes. I've recently started testing OS X 10.4 and now get these window server communication errors.
    We're using Shake v4.00.0607 using the exec option which is meant to have Shake run in render only / batch mode and shouldn't need to use the GUI at all so why we even get this error at all doesn't make a lot of sense to me. If I log into the xserve via VNC or Remote Desktop to run the job it works fine (as I have access to the GUI) and the Shake icon does appear in the dock though no other part of the Shake GUI appears on screen ...
    The Error:
    Window Server communications from outside of session allowed for root and console user only
    INIT_Processeses(), could not establish the default connection to the WindowServer.Abort
    Any ideas on how to solve the issue?

    This isn't really the right forum to ask your question. That is why there was a note saying "If your question concerns a hardware or software technical issue, please do not post in this forum...". Next time please search for a more appropriate forum. However, I happen to know the answer off the top of my head, so:
    is window server installed on intel core duo[?]
    No part of Windows is installed on the any Apple machine (at this time). You can purchase it separately and install it yourself.
    [is] mac os x server installed on intel core duo[?]
    No. Mac OS X Server is not pre-installed on any intel machine at this time. From the requirements web page it looks like it will only run on Gx machines, but yu should do more research before you believe that.

  • SMP 3.0 Agentry Client Communication Error

    Hi,
    We have installed SMP 3.0 server and SAP WM 6.1 in cloud server.  The server certificate is generated with FQDN. Within the cloud server we are able to access the WM 6.1 app in ATE by using https://FQDN:8081/SAPWM
    For accessing the app from internet we have public DNS which maps to the host. The url: https://publicdns:8081/SAPWM" is accessible in the browser we get the " I am here" message. We have put the certificate in Trusted root.
    But in the Agentry client when provide the server "url: https://publicdns:8081/SAPWM" we are getting communication error.
    Error Log
    Requesting Public Key from Server
    Connect to server 'ABCD', certificate is for 'xyz.com', so it is not valid
    Communications error (14)
    Connection failed
    Ending transmission
    From the error message we understand that the URL host and the certificate host are not matching so this is causing the error.
    Please let us know how we can resolve this issue.
    Appreciate your help.
    Regards
    Zak
    Tags edited by: Michael Appleby

    Zak,
    You will need to regenerate the certificate for the SMP 3.0 server in the cloud to use the public dns name instead of the FQDN.
    Instructions for this can be found in the following document.
    http://scn.sap.com/docs/DOC-55932
    Good luck!
    --Bill

  • Send via server communication error

    Until today I could wirelessly transfer my pictures from my SX280 HS to my computer from a remote location useing "Send via Server". Today after the first file upload progress bar completes, I get "Communication Error" "Error Detected". Is something wrong with the server? I am able to upload to the Canon Image Gateway, but that option offers no automatic transfer to my computer. I have reinstalled Camer Window and have tried again with my computer turned both off and on. I also reset the wireless settings on the camera. None of this works. All the other wireless functions on the camera work fine.
    Perhaps its a firewall issue, but disabling the Norton firewall doesn't help either. Does anyone have any suggestions for making this work?
    Thanks,
    Bob
    Solved!
    Go to Solution.

    I was able to solve this problem roughly as follows:
    I logged into my Canon iMage Gateway account and deleted all existing web services listed there
    -- Click on the link for your camera
    -- Click on "Web Service Settings"
    -- Click on "Delete camera link settings".
    I then connected the camera to my desktop where Camera Window is installed. Wifi or USB both work.
    I reestablished the "Web Service Setting" through Camera Window.
    I am not at that machine right now and cannot walk anyone through the exact steps for this part of the process
    That's it. I disconnected the camera from the computer and attempted the "Send via Server" option on the camera. It worked the first time. Photos uploaded into the ether and magically appeared in the designated folder on my home computer.
    Bob

  • Server communications error in Sharepoint365/Access web app

    I'm having a similar issue to this post using Office365 (academic). I have an
    Access web app that was working fine until about 1 week ago when suddenly became very slow to start on a web browser, and then any changes I make in Access 2013 and then attempt to save results in a dialog box "Please wait while we attempt to save changes"
    followed by "Please wait while we attempt to contact the server. Press Esc to quit". Finally, it sometimes fails with "An error occurred in the client while attempting to communicate with the server 'https://<url>.sharepoint.com/sites...
    Please contact your system administrator of technical support". If I wait awhile and try again, it usually succeeds. If I try too quickly, then I get the dreaded " '_AppHomeForm' cannot be saved because someone else has made changes to it."
    I end up having to discard changes and start over again.
    I've already deleted the local cache to no avail.
    Is anyone else experiencing similar problems? The other post indicated that the problem magically went away after awhile - I'm hoping for the same but it's been more than 1 week now.

    Glad to hear that. If the problem came back, please feel free to contact us. We'll be happy to help.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Content server communication error

    Hi,
    In an integration scenario using XI we need to send a scanned invoice (image) to a content server.
    Ideally, the call to the content server would be done directly from XI, however, the call to the content server requires query string arguments which is not supported by XI’s HTTP adapter. Therefore the content is first sent to R/3 using proxy communication and then the actual HTTP call to the content server is handled by the R/3 system.
    The content server is quite unstable which results in a vast amount of error messages as the communication to the content server is synchronous.  We want XI to recover gracefully when stopping and restarting the content server for whatever reason.
    The content server is version 6.30.0046 and runs on Win2000 Enterprise, IIS 5.0. Our R/3 system is 4.7 Enterprise, WAS 6.20, BASIS support package level 55 and PI_BASIS support package level 10.
    Has anyone experienced similar problems? Did you come up with any good solutions?
    Best Regards,
    Teddy K.

    Hi,
    In an integration scenario using XI we need to send a scanned invoice (image) to a content server.
    Ideally, the call to the content server would be done directly from XI, however, the call to the content server requires query string arguments which is not supported by XI’s HTTP adapter. Therefore the content is first sent to R/3 using proxy communication and then the actual HTTP call to the content server is handled by the R/3 system.
    The content server is quite unstable which results in a vast amount of error messages as the communication to the content server is synchronous.  We want XI to recover gracefully when stopping and restarting the content server for whatever reason.
    The content server is version 6.30.0046 and runs on Win2000 Enterprise, IIS 5.0. Our R/3 system is 4.7 Enterprise, WAS 6.20, BASIS support package level 55 and PI_BASIS support package level 10.
    Has anyone experienced similar problems? Did you come up with any good solutions?
    Best Regards,
    Teddy K.

  • SMP 3.0 with SP3 AgentryApp is not Connecting from Client : Communications error (14)

    Hello,
    In SMP 3.0 : Version 3.0.2, SP Level:02, my Agentry App : Work Manger 6.0 is working fine, it is running from device and running properly. After i migrate my SMP3.0 from SP02 To SP03, it is not connection from Any Device,(it is not showing any Error in Log file, Means App deployed successfully.) whenever we try to connect from Any device it is showing following Error Message.
    Requesting Public Key from Server
    Communications error (14)
    Connection failed
    Ending transmission
    ??? :  Is there any other confugration need to do in SMP 3.0 : SP03???? please help on this Issue...
    Thanks
    Krishna

    Hello Steve,
    i go through the SAP Note 2008882. based on that Note i run the following
    command.
    C:\windows\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -pa
    "C:\SAP\MobilePlatform3\Server\configuration\com.sap.mobile.platform.serv
    er.agentry" smpServiceUser.
    Now that Error is Gone from Log file but still it is not allowing to
    connect. Even from ATE also.
    Event Log File :
    06/19/2014 17:54:00, 0,         0,         0, Thr       3192, New files opened events.log, messages.log
    06/19/2014 17:54:00, 0,         0,         2, Thr       3192, Loading the Agentry Runtime's public/private key for password exchanges.
    06/19/2014 17:54:01, 0,         0,         2, Thr       3192, Upgraded the Agentry key pair from pre-SP03 format
    06/19/2014 17:54:01, 0,         0,         2, Thr       3192, Key pair loaded successfully.
    06/19/2014 17:54:01, 0,         0,         2, Thr       3192, Agentry Startup
    06/19/2014 17:54:01, 0,        17,        14, Thr       3192, WebSockets Front End v7.0.3.205
    06/19/2014 17:54:01, 0,         1,         4, Thr       3192, Agentry Server Agent v7.0.3.205
    06/19/2014 17:54:01, 0,        20,       150, Thr       1656, Loading Development application definitions
    06/19/2014 17:54:07, 0,        24,         4, Thr       1656, Loaded HTTPXML-HTTPXMLSystemConnection (HTTPXML v7.0.3.205) from ag3httpxmlbe.dll
    06/19/2014 17:54:07, 1,         3,         9, Thr       1656, Java-1, Chickaming Java, initialHeapSize, File: , ..\agentry\SystemLogger.cpp#792:DTLoggerHandler::badKey
    06/19/2014 17:54:07, 1,         3,         9, Thr       1656, Java-1, Chickaming Java, maxHeapSize, File: , ..\agentry\SystemLogger.cpp#792:DTLoggerHandler::badKey
    06/19/2014 17:54:07, 1,         3,         9, Thr       1656, Java-1, Chickaming Java, reduceOSSignalUse, File: , ..\agentry\SystemLogger.cpp#792:DTLoggerHandler::badKey
    06/19/2014 17:54:07, 1,         3,         9, Thr       1656, Java-1, Chickaming Java, nonStandardJavaOptions, File: , ..\agentry\SystemLogger.cpp#792:DTLoggerHandler::badKey
    06/19/2014 17:54:20, 0,        23,         4, Thr       1656, Loaded Java Back End (Java v7.0.3.205) from ag3javabe.dll
    06/19/2014 17:54:20, 0,        20,       152, Thr       1656, Loading Development application definitions for default localization
    06/19/2014 17:54:20, 0,        20,       153, Thr       1656, Finished loading Development application definitions for default localization
    06/19/2014 17:54:20, 0,        20,       151, Thr       1656, Finished loading Development application definitions
    06/19/2014 17:54:21, 0,        20,         4, Thr       3192, Server v7.0.3.205
    06/19/2014 17:54:21, 0,        17,        10, Thr       3192, WebSockets Front End v7.0.3.205
    06/19/2014 17:54:21, 0,         0,         0, Thr       3192, Old log files moved into C:\SAP\MobilePlatform3\Server\log\agentry\rolled\2014-06-19-175400
    06/19/2014 17:54:21, 0,         0,        23, Thr       3192, Agentry startup is complete.
    Thanks
    Krishna

  • Agentry Communication error 14

    Hi,
    I am having trouble connect Android Client (Agentry_7.0.3.257_Client-Android) to Agentry Server Application.
    I am using Nexus 7 (Android version 4.1.2), the device is connected to corporate network via F5 Edge Client
    I can access SMP Cockpit via Internet browser
    Server specific certificate is installed correctly
    The error or the message I am getting is:
    Requesting Public Key from Server
    SSL Hostname Invalid
    Communication error (14)
    Connection failed
    Ending transmission
    The user credentials are correct and confirmed.
    Any thoughts where is the problem?
    Thanks.
    Peter Vargovcik
    MIC Dublin Intern

    Thanks Bill for clarification, the Agentry Sever I was connecting to is not returning the "I am here!" message. Because of that I may getting the error 14.
    Therefore I installed copy of the  openUiDemo (DemoCloud scenario ID: 9216) on our local SMP server. Now the Agentry Server returns the "I am here!" message. Unfortunately now I am getting "Server error - please contact your administrator(13)" see the screenshot below
    See below the Agentry app settings
    Thanks.
    Peter

  • Why am I getting the error: error getting license License Server communication problem W_ADEPT_CORE_EXPIRED when I try to download a book from the public library using Adobe Digital Editions. It has been working for a few months, but now I suddenly get th

    I have checked and the Adobe Digital Editions is authorized. The library book doesn't expire for another 14 days.  These have been the only two suggestions that I have found in other forums.  Does anyone have any other suggestions?

    I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
    I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
    Error getting License. License Server Communication Problem only mine says  Bad Device key after.
    Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
    i hope someone answers this soon.

  • When I open a book in Adobe Digital Editions, I get the following error: Error getting License. License Server Communication Problem: E_ADEPT_DOCUMENT_TYPE_UNKNOWN:

    Hi, I bought an e-book in PDF format that uses Adobe DRM.  I've created an account on adobe.com and tried downloading the book in Adobe Digital Editions on the Mac (as well as the bookstore's e-reader--logged into my Adobe account--on an Android device). 
    It tries to download the book but get's the following error:
    Error getting License. License Server Communication Problem:
    E_ADEPT_DOCUMENT_TYPE_UNKNOWN:
    Has anyone come across this?  Any guidance would be most appreciated!
    Thanks!
    Tony

    Please refer to the KB article, Public Knowledge Base

  • I keep getting the following message after I download a book and try to open the book from my downloads (in finder) Error getting License. License Server Communication Problem: E_ACT_NOT_READY. It gives me no other information and no options other than to

    I don't really know what to do. I download a book from my library and it then goes to my download folder in finder (I have a macbook pro). When I double click on the downloaded book to open, digital editions comes up and then I get the following message
    Error getting License. License Server Communication Problem:
    E_ACT_NOT_READY
    The only option I have at that point is to close the window. My computer is registered/authorized and I have tried everything I can think of but can't get the books to download into adobe digital editions.
    Help please

    I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
    I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
    Error getting License. License Server Communication Problem only mine says  Bad Device key after.
    Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
    i hope someone answers this soon.

  • I upgraded to a new apple mac book pro and now when I try to download to adobe digital edition I receive this error:Error getting License. License Server Communication Problem: E_ACT_NOT_READY

    I upgraded to a new apple mac book pro and now when I try to download to adobe digital edition I receive this error:Error getting License. License Server Communication Problem: E_ACT_NOT_READY

    What does that have to do with Digital Publishing Suite?
    We’d love to help but if does have something to do with it, please give us
    some details.

  • A communication error occured, with the TREX TcpIp Server (Errorcode 2982)

    Hi All,
           We are in the process of Migrating our EP 5.0 --> EP 6.0. While upgrading TREX, I am getting following error:
    "Error occurred during search: com.sapportals.wcm.WcmException: <b><u>A communication error occured, with the TREX TcpIp Server (Errorcode 2982)</u></b>
    A communication error occured, with the TREX TcpIp Server (Errorcode 2982)"
           Has any one came across this type of error ?
    <b>Software version details:</b>
    EP 5.0 SP6 Patch 1 Hotfix 8
    CM SP 6 Patch 1 Hotfix 21
    Trex (Earlier 6.0.0.0)---> TREX 6.0 SP 1 Patch 6 (6.0.1.6.0)
    Regards
    Sunil Kulkarni

    Hello James,
                Thanks for writing.
    I am on Windows.
               Now the problem is solved. I had also created a message with service market place for the above mentioned problem.
    <b>Solution:</b> While upgrading the TREX, it has overwritten the "TREXIndexServer.ini", we restored it from the backup & the error was resolved.
    Thanks & Regards
    Sunil Kulkarni

Maybe you are looking for