Agentry Transaction Screen Tab

Hi,
I have a few screens in a Transaction Screen Set.
On iPad or WPF client, when I start the transaction, I can only navigate through the "Next" and "Back" buttons on the bottom, not from the Tabs on the top.
Is it a limitation or something in the configuration I missed.
Thanks.
Kevin
Tags edited by: Michael Appleby

Hi,
     Try to check the options 'Maximum number of tabs' in platform definition,'Wizard buttons' in transaction screen set.Please go through the below link
Transaction Screens
Thanks & Regards,
Sravanthi Polu

Similar Messages

  • Agentry: Trigger action when changing main screen tab

    Hi,
    I'm adapting Work Manager for iPad and in my main screen I have 4 tab screens: Work Orders, Notifications, Time Sheets and Crew Manager.
    I would like to trigger a List Selection action step when the user navigates to the Time Sheets tab in order to select the current day of the week automatically. I already created and tested the action with a button and it's working fine but I don't find a way to trigger an action when changing main screen tabs.
    Here my main screen:
    In the screen definition there is not much I can define... just the icon, size and styling...

    Ok, thank you both, the question has been answered
    Regarding Bill suggestions I think there are too many possible actions in the main screen where to apply the selection step.
    And to apply Jason's workaround I need to do a major UI change and user's are too familiar now with the solution that has been in production for a while...
    I think I will set the date after transmit. It won't work on the initial load and when user manually selects a different day and comes back to the tab, but I think it will cover more than 90% of application uses since they are supposed to synchronise every morning and register time for the current date usually.
    @Jason: I hope you can tell the idea to the engineering team

  • To get code combination in transaction screen -AR

    hi all
    i am using r12
    in AR super user -transactions-in the transactions screen -when it is queried say 10000086 in the field Number
    when distributions tab is clicked we get to see a field named GL account eg 701-100001-1000-0101-1220001-000000-0000-0000
    when i see record history for Transactions screen it says RA_CUSTOMER_TRX_PARTIAL_V
    when i see record  history for gl account   RA_CUST_TRX_LINE_GL_DIST_V  but i don't see the code combinations
    how to join RA_CUSTOMER_TRX_PARTIAL_V and RA_CUST_TRX_LINE_GL_DIST_V
    i did join with customer_trx_id but it gives more number of rows
    kindly guide
    thanking in advance

    Do you want sql script to find GL Code Combinations for a AR transaction?
    If yes, following is the query.
    select rcta.trx_number, gcck.concatenated_segments
    from ra_customer_trx_all rcta, ra_customer_trx_lines_all rctla, RA_CUST_TRX_LINE_GL_DIST rctlgd, gl_code_combinations_kfv gcck
    where rcta.trx_number = '<Give your AR Invoice>'
    and rcta.customer_trx_id = rctla.customer_trx_id
    and rctla.customer_trx_line_id = rctlgd.customer_trx_line_id
    and rctlgd.code_combination_id = gcck.code_combination_id;
    If you are looking for something else, please be clear
    Regards,
    Srini

  • CRM - Search for Business Transactions Screen

    Hi,
    When I go to the CRM - Search for Business Transactions Screen; in the second tab 'Search', when I click the Period dropdown it starts with a date in 1899 as default.
    Can anyone advise me on how to change this?
    Regards,
    Ravi.

    Hi Ravindranath
    Check if your system time zone settings are correct:
    IMG>SAP Web Application Server>General Settings>Time Zones>Maintain System Settings
    IMG>SAP Web Application Server>General Settings>Time Zones>Maintain Time Zones
    Hope this helps
    Regards
    Pragasen

  • Orders stuck in "Released to Warehouse" in Shipping transaction screen

    Hi,
    we used the RO to transfer inventory between different org, 1 order was stucked in shipping transaction screen:
    Line status: Released to warehouse
    Next step: Transact Move Order
    But I can see move order number in shipping transaction screen, the item also reserved, the order line showing allocate.
    In Transact Move Order, I can not find any record.
    In pending transaction screen, I can find those records, but no error message, can not submit there.
    Can anyone please advice what is the next step i need to do to process to the Pick Released status.
    Thanks,

    If your shipping delivery details are at 'Released to Warehouse' then the pick release has already taken place. Depending on your setups, you may also find that you have generated pick slips for these orders.
    If it's correct that those 300 orders should have been released, then you need to take the following steps to pick confirm. You don't mention if you are using mobile apps so we'll assume you're using the forms in which case you'd go to the Transact Move Orders form in Inventory and using either the pick slip or the move order (printed on the pick slip and visible in the Shipping Txns Form) or the order number (Pick Wave tab), query back the pick release suggestions/allocations and either confirm or amend as appropriate. If you're using lot or serial control then you will need to supply this information also. This will change the status for the confirmed lines to 'Staged/Pick Confirmed' in the STF.
    If you didn't intend to release some or all of those orders then you will still need to query back the move orders in the Transact Move Orders form but you should then either backorder or cancel the allocation for each line as appropriate (Tools menu).
    If you expected your lines to be automatically pick confirmed on release, then your problem lies in not having used a pick release rule with Auto Pick Confirm = Yes.
    Regards,
    Jon

  • Transaction Screens

    hi community.
    anyone know how to do focus on buttons for transaction screens? we are tried with the focused style but we cannot navigate with handheld tab button on transaction screen. On object screen we had no problem.
    Thx a lot for your reply.

    Steve, Jason, Thx again for all replys. I will try to clarify the problem.
    on picture one we have an object screen. This screen has some button. These buttons have "buttons styles" and when the user focused on any of these, the button change her color from white to violet.
    on picture two we have an transaction screen. On this kind of screen we cannot make that the "buttons styles" works. When the user focused on any buttons of the transaction screen the color not change from white to violet.
    Is it possible change the transaction screens button size, language and styles?
    Regards,
    Max.

  • Business Transaction Screen Configuration

    How can I hide / delete extra tabs from Transaction screen....can guru's help me in this topic..
    Thanks in Advance.

    Hi,
    You can use Easy Enhancement Work Bench (EEWB).
    Easy Enhancement Work Bench - SAP’s tool enables to add custom fields to standard transactions without having to modify SAP code. In a nutshell, the way this works is that SAP allows generating custom objects in predefined containers that are linked to the various transactions.
    Transaction EEWB (Easy Enhancement work bench) is used to create the custom Fields in the Custom (new additional custom) Tab for SAP Business Objects. Thus the standard SAP CRM Transactions can be extended using the Easy Enhancement Workbench (EEWB), i.e., an extra tab is added to the View - Transaction Data in CRM Transaction.
    During the creation of the project in EEWB, a workbench as well as customizing request is defined. After the creation of project, extension(s) are created. The extension contains the information regarding the business object to be modified and the type of the extension.
    Note: In order to extend CRM’s generic business transactions, e.g. orders and opportunities, select object ‘Business Transaction’ and type ‘Add New Fields’. For business partner extensions select object ‘BUPA’, type ‘Add New Fields’.
    EEWB uses customizing include (CI) provided by SAP to make extensions easy. These customizing includes are included in the People Centric UI and relevant database tables (For instance CRMD_CUSTOMER_H and BUT000 if Business Transactions - Sales & Service Objects and Business Partner are extended respectively).
    The Z Fields added using the Transaction EEWB are appended to the table CRMD_CUSTOMER_H and the entry in the table CRMD_CUSTOMER_H  corresponds to one respective entry in the table CRMD_ORDERADM_H with HEADER_GUID.
    (Relation between two tables: CRMD_ORDERADM_H-GUID = CRMD_CUSTOMER_H-GUID.
    Reward if it helps.
    Rashit

  • Is it possible to add PERNR field to MIGO or MB1A transaction screens?

    Hi,
    Ours is a service industry with @ 10000 employees and we have implemented SAP with MM & HR module. We issue uniforms to all the employees when they join (new Joinee) and again once in January every year as reissuance. We intend to keep size information in employee masters in HR along with station code, designation, department and cost centers.
    At present we are using two fields goods recipient and unloading point to mention employee code and type of issue (new joinee or reissuance). This is because employee code (PERNR) field is not there in MIGO_GI screen or MB1A screen.
    Is it possible to add PERNR field to any of these transaction screens?
    If added then we can fetch the relevant information about issuance of information along with station code, designation, department in Z report.
    If possible, then how it can be done?
    Thanks in advance,
    Satish

    Hi ,
    as i understand we can add new fields in a transaction through user exit /field exit. so please discuss with your ABAP consultant & try to find out all the exit available for MIGO/ MB1A. then you have to decide which one will suit you. here you have to consider some factors like whether you need to enter values in the field or the field needs to fatch any value from any other table & should populate here.
    the ABAPer can then write the code & add your required logic here.
    i am not very good in this subject. just tried to share what ever i knew.
    regards,
    anubhab

  • How to open a R3 Transaction screen in VC

    Hi There,
    Can anyone tell me how to model VC in such a way that I can open up a R3 transaction screen for the VC.
    I have done this in the course but a an reproduce the example with a other TXcode.
    i put this code in my inputfield url: "pcd!3aportal_content!2fcom.sap.pct!2ftemplates!2fiviews!2fcom.sap.portal.sap_transaction_iview?System=SAP_R3&TCode=PA30&GuiType=WebGui&DynamicParameter=RP50G-PERNR%3D&OkCode=ENT2"
    etc, etc, ...what I want to have is a general coding and some info on where to fill in my TXcode in this line.
    I created a signal out from a tabel ...to get a signal out one level up...i connected the iview with the HTML and compliled...but it gves me (over and over again ) a message that eventis declared but can not be raised..  anybody any ideas
    steven

    I found some extra info on the WIKI page
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/
    Here it is said that 'SAP_R3" must be replace by your system name
    I will try this .....
    Create an iView from a default template of the type SAP GUI for HTML (your system connection to your backend must be configured before). You have to choose the system and the transaction code. Then integrate this iView via a html view and the URL.
    An alternativ is a html view with an URL:
    "http://<portal>:<port>/irj/servlet/prt/portal/prtroot/com.sap.portal.appintegrator.sap.Transaction?System=SAP_R3&TCode=VA02&GuiType=WebGui&DynamicParameter=VBAK-VBELN="&@Order_Number&"&OkCode=ENT2"
    This example is calling transaction VA02 from an ERP backend system. The systemalias is SAP_R3 (you need to replace it with your systemalias),
    skipping first screen and bringing the sales order "Order_number" in change mode.
    The parameter Order_number is filled previously in the Visual Composer model.
    <a href="http://https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/">http://https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/</a>

  • Upload documents from transactional screen - Sale & Purchase Order

    hi All,
    I am trying to have DMS attachment from trx - VA02 directly. I have come across few links which say - this is possible.
    upload documents from user transactional screen to content storage area | LinkedIn
    I am able to get the functionality for CJ20N - 'WBS Element' Object (Screenshot attached). Can someone pl suggest if I am missing something to get the same functionality for Sale Order / PR & PO.
    For Sale Order - I believe the 'Create' icon shall be 'Enabled' once I navigate - Extras -> Documents.
    -thanks

    Hi
    This button is only displayed if you use the new screen logic (see note 1066915) and when you have maintained the necessary customizing for the required document types and objects in transaction DC10.
    So I would kindly ask you to go to transaction DC10 and mark a document type where the necessary object is linked under 'Define object links'. Choose the right object and display its details by double-click. Then you will see the field 'Create document' where you have to enter a value '1' (using transaction) or '2' (simple creation). Please enter a value and flag the 'Additional function' checkbox too.
    /Tilak

  • Link a report with transaction screen

    I am working on Creating Transaction screen. How do I link a report say "Word Document" to my transaction : I need to <b>export</b> the data required in my transaction from the<b> Database Table to the Word Document</b> and link that to the transaction screen so that I can create a Push Button on transaction screen to take the printouts of the required Financial Data

    Hi
    Try to see trx ole: here you should find same examples to manage a word file.
    Max

  • Adding fields/text on standard SAP transaction screens

    Hi,
    How do we add the fields on standard SAP transaction screens?
    For example, if I have to add field on transaction FB01 screen or change text of existing fields, how does it works?
    Please let me know.
    Thanks ,
    Yogita

    hi
    every standard sap transaction have enhancement options you can add fields there
    try this program to find the field-exits of the standard transaction.
    [https://wiki.sdn.sap.com/wiki/display/Snippets/howtogettheuser-exitsofa+transaction]
    regards
    sarves

  • Transaction Data Tab

    Dear All,
    When user creates ticket all the user status displayed in ticket under Transaction data tab-->Action Tab.
    But in my case for some user all the configured statuses are not getting displayed.
    What could be the reason? User has got enough authorization too. Is any additional autho is required?
    Regards,
    Nikhil

    Dear Friend,
    I think you are confused, in transaction data tab
    Actions tab-will show the scheduling actions and action which are carried out with the status of their execution.
    Status tab shows all the status values you have configured.
    This tab basically shows the current status of the ticket.
    Please reward points.

  • Attaching the documents to customer transaction screen

    Hello Experts,
    Greeting of the day!!
    One of my client wants to attached a scan document of received transaction in a Customer transaction screen, Now i m confuse whether this is possible in oracle Applications R12.1.3 or not?
    If yes then please guide me or give any reference??
    Oracle Application : R12.1.3
    Database : Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    Thanks,
    Atul

    Hi Helios,
    I found the solution on oracle application screen itself.
    Oracle Apps already provided the attachement future in the application itself.
    VIEW ----> ATTACHEMENTS.. here we can attach a any type of document for customer transaction or supplier invoice.
    Thanks,
    Atul Ramteke

  • Adding custom fields to FPE1/2/3 transaction screen

    Hi guys,
    I need to add custom fields from table DFKKOP to transactions FPE1/2/3 under ADDITIONAL DATA area while manually entering NEW BUSINESS PARTNER ITEM.
    The transaction is not BDT enabled and does not have a screen exit. The user exit and BaDI dont seem helpful to me.
    The screenshot below shows the user exits and BaDI for the transaction.
    Link: Exits
    What are my options to add fields to the transaction screen now?
    Please help out!

    Hi,
    Yea i got the functional guys to configure it. Was a unique issue!.....But I know how they did it.
    You can add it through SPRO transaction. Go to the below mentioned path.
    Go to SAP Reference IMG
    Financial Accounting > Contract Accounts Receivable and Payable > Basic Functions > Posting and Documents > Document >
    Screen Preparartions > Include Own Fields in Detail Screens.
    Here you need to enter the details from FPE1 transaction screen.
    Activity Documentation:
    Include Own Fields in Detail Screens
    In this activity you can, if you have added customer fields to the document structures, include these customer fields in the entry screens of the transaction for posting documents.
    For the detail screens (business partner item and G/L account item) you can create a screen that contains your own fields. You must create this screen as a subscreen using the Screen Painter. In addition you have to create modules for the intialization and for data transfer (PBO and PAI).
    Activities
    If you have extended the document strutures to includes customer fields, and you need these fields in the entry screens for posting documents, you must create the screen using the Screen Painter.
    Carry out this step to create the screen and the modules that go with it in the system. You do not have to activate these afterwards.
    Further notes
    Read the field help for each field in the table. This describes the exact procedure.

Maybe you are looking for