Agents Not Displaying as "Yes" in SCCM Console

I've installed the client to a workstation via the console. The client installed successfully but I'm not seeing any responses from it back to the site server but I'm also not seeing any errors in the logs, unless there's a log I'm missing. There's no
DNS issues, no network connectivity issues either. I am not doing the active directory schema extension, I am only doing network and heartbeat discovery and the IP range the workstations are in are set in boundaries. I'm not sure what's going on and was hoping
maybe someone had some advice. I've tried this since on 2 other workstations with the exact same result. Any help would be appreciated. Thank you.

I show it successfully registered:
<![LOG[[RegTask] - Client is not registered. Sending registration request for GUID:9F4DA8C9-2DE5-42A8-85BA-512B0AEA40A3 ...]LOG]!><time="12:50:17.271+240" date="05-14-2013" component="ClientIDManagerStartup" context="" type="1" thread="2700" file="regtask.cpp:1634">
<![LOG[[RegTask] - Client is registered. Server assigned ClientID is GUID:9F4DA8C9-2DE5-42A8-85BA-512B0AEA40A3. Approval status 1]LOG]!><time="12:50:17.552+240" date="05-14-2013" component="ClientIDManagerStartup" context="" type="1" thread="2700"
file="regtask.cpp:1642">
How do I check to see if it was able to retrieve the MPs?

Similar Messages

Cisco Agents not Displaying on Supervisor Desktop

2 Cisco agents were not displaying on the Supervisor Desktop, but were able to take calls. The agents were correctly configured in the UCCX. Logging off and back on did not correct the problem. The agents restarted their computers to resolve the problem. Any idea what could have caused this? Thanks

Community Feedback Forum is a "Please do not post content other than feedback regarding the Cisco Support Community experience within this community." community.
Moved to Contact Center

Can not display visual flow in bpel console

Visual flow and audit flow can not be displayed after I click a deployed process wich file adapter in BPEL console. This problem can be consistently reproduced.
1. Create a very simple bpel flow with file read adaper . The file adapter is set to polling file every 5 second. Choose "Create Instance' in the receive activity.
Or you can use the flow in $BPEL_HOME\integration\orabpel\samples\tutorials\121.FileAdapter\FlatStructure
2. deploy the bpel process.
3. go to bpel console dashboard and find the deployed process.
4. click the process, you come to the initiate tab. Click 'Post XML Message'.
5. pick any other process and run it. Open visual flow or audit flow, page shows as blank.
I know I am not suppose to do step 4 because the process will be initiated by the file adapter. But sometimes people just accidently come to this page, especially for a new user like me. The problem is, after this, you can no more bring up visual flow even after restart the server. I had to unstall BPEL PM and re-install it.
I am using the latest version of BPEL PM (10.1.2.0.2).
I noticed someone experienced this problem before , and he/she als had to re-install BPEL too. (http://forums.oracle.com/forums/thread.jspa?messageID=1336202&#1336202). I think this is probably a bug. If anyone know how to quickly fix this problem or any available patch, please let me know.
Thank you,
Kate

What happens if you undeply the process then deploy it again.
to undeploy you go to the BPEL Console. Select the process on the left hand side. Click the manage tab then undeploy button.
If you have deployed more than one version you will need to remove all instances.

Developer toolbar not displaying

Hi,
Apex: 4.2
Theme: JQuery Mobile
The Developer toolbar just does not display. Yes I am logged on as a developer and yes the availablility status is set to 'available with edit links'. I have tried google chrome and IE8 and another IE browser. Makes no difference.
Yes the app is on apex.oracle.com:
Workspace: dagarin_trial
app: acr_mobile
Thanks
Steve.

Daggers wrote:
Apex: 4.2
Please specify version numbers to at least the third (patch) level.
Theme: JQuery Mobile
The Developer toolbar just does not display. Yes I am logged on as a developer and yes the availablility status is set to 'available with edit links'. I have tried google chrome and IE8 and another IE browser. Makes no difference.
This is a known issue. Use workarounds described in release notes.
Yes the app is on apex.oracle.com:
Workspace: dagarin_trial
app: acr_mobile
This is not an official Oracle support channel. Most of the assistance here is provided by volunteers, we don't work for Oracle, we don't have admin access to apex.oracle.com. If you want assistance with apps there you need to create a guest developer account and provide a username and password as well as the workspace name.

Application does not show up in the manager console -- Java Web Start

Hi...
I have downloaded the jnlp file so many times but still the aplcation is not displayed in the JWS manager console.
This my jnlp file : -
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://2m6:8100/jws/" href="ChatApplication.jnlp">
<information>
<title>Chat Trial</title>
<vendor>SAI</vendor>
<description>Just an example</description>
<icon href="images/icon.gif"/>
</information>
<security>
<all-permissions />
</security>
<resources>
<j2se version="1.3"/>
<jar href="chatapplication.jar"/>
</resources>
<application-desc main-class="ChatImpl"/>
</jnlp>
Can anyone give me any suggestions???? They are welcome.
-Sid

Actually this problem usually occurs as a result of the way you have configured your href line for the jnlp file. If you are still having some problems try putting in:
href="http://2m6:8100/jws/ChatApplication.jnlp"
See if that helps it at all. It's possible that it's not using the relative reference combined with the codebase URL given.

Problem with Out of Band Discovery resulting with Out of Band features not available in SCCM console for computers with provisioned AMT device

Hi,
We configured the Out of Band component, but are using Intel SCS RCS to provision AMT devices remotely. The remote configuration process with Intel SCS works fine; we are able to connect to the AMT web UI and we can use a free KVM tool to manage the computer
remotely.
The AMT devices are configured with AD integration, so an object is created for each of them in a specific OU. Also, an AD group is added to the AMT devices so remote PT Administration permission is granted to it. This group includes the ConfigMgr Site
Server account, the account of the server running the Out of Band Service Point and my own user account.
This configuration seems OK since when connecting to the AMT web UI, I use Windows Integrated authentication with my user account and can manage the device successfully.
So the only step remaining is running the OOB discovery to enable Out of Band features for the computers in the SCCM console. We want to use the ConfigMgr OOB console. I right-click a computer or a collection and launch the AMT discovery. I check the OOB
server log, I don't see errors; the OOB service point connects to the AMT device and discover a status of 4, which is Externally provisioned, as expected. The problem is the AMT Status, AMT Version and Provisioned AMT fields for the computer in the ConfigMgr
console doesn't get updated, even after doing display refresh.
Here's the amtopmgr.log (I changed computer name and IP address information to protect client privacy) :
General Worker Thread Pool: Work thread 364 started SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
Discover COMPUTERA using IP address 192.168.12.7 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
AMT Discovery Worker: There are 1 tasks in pending list SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
AMT Discovery Worker: Wait 20 seconds... SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
AMT Discovery Worker: Wakes up to process instruction files SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
AMT Discovery Worker: There are 1 tasks in pending list SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
AMT Discovery Worker: Wait 20 seconds... SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
DoPingDiscoveryForAMTDevice succeeded. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
session params : https://COMPUTERA.contoso.com:16993 , 11001 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
DoWSManDiscovery succeeded with user name: admin. AMTStatus = 1. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
Start Kerberos Discovery SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
session params : https://COMPUTERA.contoso.com:16993 , 484001 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
DoKerberosWSManDiscovery succeeded. AMTStatus = 4. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
Discovery to IP address 192.168.12.7 16 15:16:32 364 (0x016C)
CSMSAMTDiscoveryTask::Execute, discovery to STI17259CPCO succeed. AMT status is 4. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
CSMSAMTDiscoveryTask::Execute - DDR written to E:\SMS\MP\OUTBOXES\ddr.box SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Fill Machine Property' SID=1 MUF=0 PCNT=5, P1='COMPUTERA' P2='' P3='COMPUTERA.contoso.com' P4='' P5='' SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
CStateMsgReporter::DeliverMessages - Created state message file: E:\SMS\MP\OUTBOXES\StateMsg.box\6heghx71.SMX SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Unspecified' SID=10 MUF=0 PCNT=1, P1='COMPUTERA.contoso.com' 16 15:16:32 364 (0x016C)
CStateMsgReporter::DeliverMessages - Created state message file: E:\SMS\MP\OUTBOXES\StateMsg.box\rmit91js.SMX SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
General Worker Thread Pool: Succeed to run the task COMPUTERA.contoso.com 16 15:16:32 364 (0x016C)
General Worker Thread Pool: Work thread 364 has been requested to shut down. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
General Worker Thread Pool: Work thread 364 exiting. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
The Management Point is up and running.
Any suggestion or advice is welcomed!
Thank you
Patrick

I found something interesting on this problem, it seems the OOB discovery process is working fine, but for an unknown reason, the site server is not receiving the information from the OOB Service Point to update the AMT Status of the client in the SCCM
database.
The log tells me that a DDR file is created to be sent to the site server. When looking into the SMS\MP\Outboxes\ddr.box folder, I see about 50 DDR files, the oldest one is dated when I started testing OOB discovery.
So the server is unable to send the files to the site server.
Also, since I started this thread, I noticed another issue that could be related to this problem. The same server is also holding the State Migration Point role, it is working fine, but when doing USMT operations, the status of the computer association is
not updated in the console (In Progress, Completed, missing USMT store path, etc.). When looking into the SMS folder on the server, I see a big backlog of SVF files containing information related to the SMP.
I looked into the log files, but didn't find the errors yet to explain this.
The computer account of the server is a member of the SMS_SiteSystemToSiteServerConnection_Stat_XXX group on the site server.
Note that status messages are being sent successfully, I see them in the Monitoring node of the console under Component State, and there is no backlog in the SMS\MP\Outboxes\statemsg.box folder.
Tnx for your help
Patrick

SCCM 2012 Client was removed but SCCM console still showing the status as "Yes"

Hi,
In a VM, SCCM 2012 client agent was removed and the VM was reverted back to a clean machine. SCCM console still shows the status as "Yes" even after the client agent was removed. Heartbeat Discovery is set to run every 1 hour.
Please guide on this.
Regards, Lorin Davis

It's kind like a person dying (sorry to be a bit morbid) -- how does the phone company know the person died? The dead person certainly can't tell them and the phone company doesn't query every person it services and ask them "are you alive?"
Thus, someone else must notify them of the person's passing. This is no different than a client agent "dying" in ConfigMgr. A ConfigMgr site never initiates communication with clients and thus something else needs to tell the site that the client
agent is dead. You! Or, an automated process (as Torsten mentioned) that goes through automatically marks a client as "dead" that hasn't been heard from in x number of days.
Jason | http://blog.configmgrftw.com | @jasonsandys

Sccm console machine showing Client=yes Active =no

Sccm console machine showing Client=yes Active =no any troubleshooting tips also machine was pingable and with current hardware inventory

ensure that frequency for "clear client install flag" maintenance task is set to greater than heartbeat discovery period.
http://technet.microsoft.com/en-us/library/bb694040.aspx
http://blogs.technet.com/b/configurationmgr/archive/2009/08/10/troubleshooting-issues-where-clients-are-not-reporting.aspx
Prashant Patil

SCCM console does not show the link to the report manager!

SCCM console does not show the link to report manager.
Any idea?
thanks!

Hi,
The report manager URL isn't displayed in SCCM console. Why you want to display it in console?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Service Manager Portal not displaying VM console and related details

Hi All,
We have deployed private cloud with system center products using Cloud Services Process Pack and we have deployed Service Manger portal for VM provisioning in Cloud
The Service Manger portal does not display VM console and VM details
I have following queries
How to take remote console of VM deployed by end user through service manager portal
How will user come to know quota limit utilized in cloud under his account
The VM are deployed through SCSM portal are in shutdown state how to auto start the VM after provisioning
Please help since we are not able to find any solution for the above
Appreciate if any workaround is available for the same
Thanks
Manzoor Ahmed

The component of System Center that is capable to give console access to your VMs, is App Controller.
Once the user are logged in here, they should see their quota, limits and resources available.
Yes, the VMs are powered off by default when using the CSPP. You can edit the runbooks and add a task that will start them after provisioning.
For your information:
Many things has changed since the release of Cloud Service Process Pack. A new set of tools are provided with Windows Azure Pack to have a streamlined Infrastructure as a Service offering within the enterprise. Windows Azure Pack will leverage VMM (in the
same way as SCSM does) but in conjunction with SPF (component within Orchestrator) to give you a framework that is identical to Windows Azure (Microsoft's own cloud) running on-premise.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

[svn] 1017: Bug: BLZ-95 - nio channels are not displayed in ds-console

Revision: 1017
Author: [email protected]
Date: 2008-03-28 18:33:47 -0700 (Fri, 28 Mar 2008)
Log Message:
Bug: BLZ-95 - nio channels are not displayed in ds-console
QA: Yes
Doc: No
Details:
* Needed to update one of the containers in the ds-console client code for endpoint display, which contains a hardcoded list of endpoint types it pulls in.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-95
Modified Paths:
blazeds/branches/3.0.x/apps/ds-console/console/containers/EndpointManager.as

Addendum to original post - uncommenting the following code section and running both the client and the server eliminated the pauses, however the time required to perform the connections was slower than I hoped. The best I could achieve was about 1.25 seconds for 250 connections with a 20ms pause every 20 connections (dropping the pause less than 20ms or increasing the batch size more than 20 would result in connections taking 10-20 times longer!).
/* if ((i % 20) == 0) {
Thread.sleep(20);

Sccm console on windows 8.1 - window display issue

I'm currently using a surface pro 2 with win 8.1 enterprise (sccm is 2012 r2). Overall the surface is a great piece of hardware. One problem that I'm having is that the sccm console doesn't properly display wizard windows properly. They
are cut off, horizontily starting at the entire cancel button and to the right. Some times it is a vertical issue, and I can't get to tall the options on a screen. Please see the SS for an example of both horizontal and vertical cut offs.
I had monkeyed with several setting on my profile, so I signed in with a different account that had no user profile on the machine....same issue.
It's frustrating that some things I need to do on a very regular basis I now have to rdp into the server in order to do. Has anyone else seen this and does anyone have any ideas for a solution?

Hi,
If I remember correctly that is a problem related to changing the Text Size to one of the below options.
Medium - 125%. This sets text and other items to 125% of normal size.
Larger - 150%. This sets text and other items to 150% of normal size. This option appears only if your monitor supports a resolution of at
least 1200 x 900 pixels.
If you change this does it work then?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Users are not displaying in Management Console's Sessions (AS Java)

Hi,
Recently we upgraded our Development Server to EHP 7.11.
In SAP Management Console, inside AS Java, when we are trying to view the Sessions, in the User Column the user names are not displaying.
Those users are authenticated through UME.
Before upgrading users logins were displaying.
Please help us to rectify this problem.
Thanks and Regards
Ravi Shankar K

Did you try to run the MMC on url. http://hostname:5xx13.
where xx denotes the instance no of thet host.
Thanks
Rishi Abrol

CSV output = Yes, but link not displayed

Hi,
Anyone encountered/know how to fix this one?
I've a report in an SQL Report region with CSV Output = YES, but the link label is not displayed.
(CSV link is displayed OK on other reports).
Thanks
John D

John,
The report template has to contain a certain substitution string. Please see the popup help for that yes/no selector on the report attributes page.
Scott

BPEL process is not displaying in BPEL Console

Hi
We are deploying the process through jDeveloper to BPEL PM, we have around 100 process are successfully deployed. Once i restart the OPMN by giving OPMNCTL STOPALL and OPMNCTL STARTALL. The process are not displaying. Once restart the whole server means it is coming. what could be the problem
Thanks in Advance
Hamid

After deploying did you try a clear WSDL cache in the BPEL console?
Do you have a look in the log files?
Marc
http://orasoa.blogspot.com

Agents Not Displaying as "Yes" in SCCM Console

Similar Messages

Maybe you are looking for