Agents not getting SCOM UR4 Update Patch

SCOM Agents were installed manually to 20 Domain Controllers but only 5 of them have SCOM UR4 Update Patch applied
I would like to know what may be the cause of this scenario?
Manage to patch the remaining DCs by running the KB2992020 for the SCOM Agent.

Hi Jay,
Refer to the below
https://cloudadministrator.wordpress.com/2014/05/10/system-center-2012-r2-operations-manager-ur2-does-not-updated-agents-trough-the-console/
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Join the Singapore System Center Admin Group
SG System Center Admin Group
Please remember to click Mark as Answer on the answer if it helps you in anyway

Similar Messages

Windows 8.1 will not get Forefront Client Updates from WSUS

Recently I noticed that my Windows 8.1 clients were not getting updates from WSUS 3.2. After some searching I found it was an issue with HTTPS and the solution was to disable HTTPS or enable TLS. So I enabled TLS on the Server 2008 R2 WSUS server
and that fixed the issue with my 8.1 clients not getting updates except for Forefront Endpoint Protection 2010. My SCCM server deploys the client fine but it is version 2.1 and normally the client and definition updates come from WSUS with the
latest client version being 4.5. However, my Windows 8.1 machines will not get the client updates even though they are automatically approved for all machines.
I am just wondering what else I can check or change to make sure my Windows 8.1 clients get the Forefront client updates as they should?? I am wondering if I manually install the 4.1 client update if it will take the client updates after that.
I only have about eight Windows 8.1 machines so if I have to do that by hand for now then I will and I think my organization will be moving to Server 2012 and SCCM 2012 this summer sometime.

I reread your post and have another suggestion. If your SCCM 2007 server is still deploying the old 2.1 FEP client version, then you should install the latest anti-malware platform update for the SCCM server so you can deploy it from there instead of WSUS:
http://support.microsoft.com/kb/2952678
http://blogs.msdn.com/b/minfangl/archive/2013/08/15/guidance-on-install-anti-malware-platform-updates-for-fep-2010-su1-and-scep-2012-sp1.aspx
Also, you may be affected by this:
"Anti-malware platform updates on MU will use special detection logic and applicability rules to make the anti-malware platform updates available only on computers with previous N-2 anti-malware platforms installed. For example, on April 8th,
anti-malware platform of version 4.5.x will be released on MU, and it will only be offered to computers where anti-malware platform version 4.3.x or 4.4.x is available. If a computer has FEP or SCEP client with version 4.1.x, it has to be upgraded to version
4.3.x first, then to the latest version (4.5.x). If a computer has FEP or SCEP client with version older than 4.1.x, because of the same N-2 rule, it has to be upgraded to 4.1.x first, then to 4.3.x, and then to the latest version (4.5.x). Required updates
will be kept on MU to ensure that this upgrade process is available for computers running older versions of the Microsoft anti-malware platform."
http://blogs.technet.com/b/configmgrteam/archive/2014/03/27/anti-malware-platform-updates-for-endpoint-protection-will-be-released-to-mu.aspx

Jsf page not getting refreshed with updated values?

Hi All,
- managed-bean - session scope.
- On a request, Even though, I am updating the bean's properties(values), my Jsf page is not getting refreshed with updated values as it is displaying the older values.
Can anybody throw some light?
Thanks in advance.
- Sri

Please try to give us more information, follow BalusC suggestion.
For this moment I only can say you that the more common cause to this problem (in my expirence) is that you have problems with your conversion/validate phase.

My ipod says it is updated to most current 6.1.6, i use the rdio app and it worked but now with the update it needs 7.0 but i do not get option to update to this what do i do?

my ipod says it is updated to most current 6.1.6, i use the rdio app and it worked but now with the update it needs 7.0 but i do not get option to update to this what do i do?

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 7.1.x
iPhone 4S                                    iOS 8.x.x
iPhone 5                                      iOS 8.x.x
iPhone 5c                                     iOS 8.x.x
iPhone 5s                                     iOS 8.x.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 8.x.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 8.x.x
iPad 3                                          iOS 8.x.x
iPad 4                                          iOS 8.x.x
iPad Mini & Mini Retina                iOS 8.x.x
iPad Air                                        iOS 8.x.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

I have photoshop on my mac book but I can not get it to update thru my creative cloud

I have photoshop on my mac book but can not get it to update thru creative cloud installer any idea's everything else has updated but i can not get the latest version of photoshop cs6 update

Try Photoshop's Help menu > Updates
Gene

Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

Hi tania184,
Have you contacted your email provider to make sure there are no problems on their end? If they say their email servers are working properly, check the outgoing and incoming mail servers entries on your iPhone to make sure both are entered correctly. Enter the outgoing mail server even if the account setup indicates that is optional.

HT1222 i am not getting the software update tag in the general settings for my iphone, how to update my software then??

I am not getting the "software update" tag in the general settings for my iphone, how do I update my iphone 4 software then????

How to update your iPhone, iPad, or iPod touch

I can not get the new updates because my start disc and hard drive are full, I need 1.98 GB.

I can not get the new updates because my start disc and hard drive are full, I need 1.98 GB.

Some folks recommend OmniDiskSweaper to allow you to review your stuff to find possible candidates to throw away.
Even if you throw away some stuff and your desired "1.98GB", then what? If that's the number you need for the update, you'll just use most or all of the reclaimed space with the update and you are right back to where you started.
You don't specify what kind of machine you got but presumably it's a mac pro since you posted in the Mac Pro community. In which case just get yourself another drive or two and move stuff around to free up your boot drive.
[Perhaps you should hurry too since I expect hdd prices might be going up due to possible impending hdd shortages.]
Finally, if some of those updates are major system updates you want extra drives for backups because I always recommend you never do major updates to your system without backups to that system.

My ipod touch is stuck on the 4.2.1 software, its a 3rd gen as well i was just wondering why i can not get the lastest update can you please help me with this issue

i have been having an issue with updating my ipod touch for some time now and i can not seem to get it to update to the lastest update. it is stuck on 4.2.1 software and i can not update it to 4.3 or any other ios software update. can you please help me to solve this issue.

It sounds like you actually have a 2G iPod Touch which can only go as high as iOS 4.2.1. If it's an 8 GB iPod Touch it's definitely a 2G iPod Touch as there was never such a thing as a 3G 8 GB iPod Touch. See this article to help verify what generation iPod Touch you have.
Identifying iPod models
B-rock

Keychain and gpg-agent not getting along

I have a problem with gpg-agent. I have been using the Funtoo keychain tool for a while, for my SSH keys exclusively. Works flawlessly - I log in, I call keychain, I type in my passphrases, and it caches my keys. Never get prompted for a passphrase during SSH connection attempts.
GPG is a different story. I have a GPG key, and I occasionally en- and decrypt files with it. So far so good. I also found out how to get keychain to cache the GPG key. It also picks up my gpg-agent, which is started as per the wiki entry (except that instead of putting it systemwide in /etc/profile.d, I put it in Openbox's ~/.config/openbox/environment file, which is where the SSH agent stuff is supposed to go as well.
Gpg-agent seemingly launches fine, it exports its environment variables just fine:
$ echo $GPG_AGENT_INFO
/tmp/gpg-3faT29/S.gpg-agent:2352:1
$ cat .gnupg/gpg-agent.env
GPG_AGENT_INFO=/tmp/gpg-3faT29/S.gpg-agent:2352:1
There's only one gpg-agent process running:
$ ps aux|grep gpg-agent
luser 2352 0.0 0.0 16252 1184 ? Ss 00:00 0:00 gpg-agent --daemon --write-env-file /home/stijn/.gnupg/gpg-agent.env
luser 3411 0.0 0.0 9276 1016 pts/0 S+ 00:16 0:00 grep gpg-agent
Keychain picks that up as well:
$ keychain --eval
* keychain 2.7.1 ~ http://www.funtoo.org
* Found existing ssh-agent: 2346
SSH_AUTH_SOCK=/tmp/ssh-YhDgORoL2345/agent.2345; export SSH_AUTH_SOCK;
SSH_AGENT_PID=2346; export SSH_AGENT_PID;
* Found existing gpg-agent: 2352
GPG_AGENT_INFO=/tmp/gpg-3faT29/S.gpg-agent:2352:1; export GPG_AGENT_INFO;
* Known ssh key: /home/stijn/.ssh/id_rsa-amalthea
* Known ssh key: /home/stijn/.ssh/id_rsa-athena
* Known ssh key: /home/stijn/.ssh/id_rsa-zeus
* Known ssh key: /home/stijn/.ssh/id_rsa-mnemosyne
* Known gpg key: [8 digit hex key]
However, when I open Mutt (or just try to decrypt about any GPG encrypted file), it will prompt me for the passphrase, despite the key already being cached. Passing --use-agent does not help (I also set that in ~/.gnupg/gpg.conf).
The bizarre thing being, of course, that the keychain-cached key did not get picked up, but if I enter my passphrase into the prompt I get the first time I call gpg, it does seem to get cached - I can open mutt, decrypt files, etc., it will all use that cached key.
Any tips? I get the feeling I'm missing something, but couldn't find what exactly.
Last edited by .:B:. (2011-12-06 22:25:27)

Gpg-agent by itself works fine, although I get the feeling that, a bit like sudo, there's an expiration date on the cached key - it seems I need to type the passphrase again after a few hours or so.
Either way, I'd love to get this working with keychain.

6681 not getting detected by update software

the 6681 is detected by PC suite but not by the update software..plz help me on this

First go to www.nokia.com/softwareupdate and enter your product code (should be found on the back of the device) and check if there is any new SW upgrade for your phone.
If no, then NSU might not get this.

CCMS agent not getting registered

Hello,
No activities carried out on Solman 7.1 & managed system CRM 7
As I was getting error in RZ21 of solman for agent of our CRM7 system while testing connection,I was trying to re-register sapccm4x agent on managed system CRM 7
So first I stopped the current sapccm4x agent on CRM7 & de-registered it & re-registered which solved one problem of "hostname unknown"
But instead started giving new error shown below :
ERROR: can't register at SOLMAN. RfcRc = 2, AUTHORITY_NOT_AVAILABLE
RFC Error Info for SALF_CSM_AGENT_REGISTER
message: EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
status: EXCEPTION AUTHORITY_NOT_AVAILABLE RAISED
CSMREG user in SOLMAN 000 has this role SAP_BC_CSMREG assigned & it works fine for all other managed systems.
Kindly request your help to solve this problem & sapccm4x agent registered.
Thanks
Shradha

Hi Shradha,
1. what is the version of ccms agent.
2. what is the SAP_BASIS component level and patch level.
3. add SALF_CSM_AGENT_REGISTER into SAP role SAP_BC_CSMREG
With Regards
Ashutosh Chaturvedi

Not getting prompt to "update template files" after editing template

This has happened to me before and you guys helped but I can not find my past post now on this forum. After I edit a template I would normally get the prompt to "update template files" then it would update all the files using that template...but now for some reason I am not being asked and because if it none of the pages using the template are being updated....anyone know why?? dreamweaver cs4
thanks!!
T

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"><html>
<head>

<title>CTHS MAIDEN WINNERS</title>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<link rel="stylesheet" href="../aboutus.css" type="text/css">
<link rel="stylesheet" href="../bcthoroughstyles.css" type="text/css">
<link rel="stylesheet" href="../halloffamestyles.css" type="text/css">
<style type="text/css">

</style>

</head>
<body>
<div align="center"> 
BRITISH COLUMBIA STAKES HISTORIES 
 
</div>
<table width="95%" border="0" align="center" cellpadding="2" cellspacing="0">
<tr>
 <td width="25%" height="197" valign="top"><a href="../STAKES%20HISTORIES/ascot_grad.htm">ASCOT GRADUATION</a> 
 <a href="../STAKES%20HISTORIES/ballerina.htm">BALLERINA</a><a href="../STAKES%20HISTORIES/bc_cup_classic.htm"> 
 BC CUP CLASSIC</a> 
 <a href="../STAKES%20HISTORIES/bc_cup_debutante.htm">BC CUP DEBUTANTE</a> 
 <a href="../STAKES%20HISTORIES/bc_cup_distaff.htm">BC CUP DISTAFF</a> 
 <a href="../STAKES HISTORIES/bc_cup_dogwood.htm">BC CUP DOGWOOD</a> 
 <a href="../STAKES%20HISTORIES/bc_cup_nursery.htm">BC CUP NURSERY</a> 
 <a href="../STAKES%20HISTORIES/bc_cup_sprint.htm">BC CUP SPRINT</a> 
 <a href="../STAKES%20HISTORIES/bc_cup_stallion_fil.htm">BC CUP STALLION FILLIES</a> 
 <a href="../STAKES HISTORIES/bc_cup_stallion.htm">BC CUP STALLION COLTS</a> 
 <a href="../STAKES HISTORIES/bc_cup_stellar_jay.htm"> BC CUP STELLAR JAY </a> 
 <a href="../STAKES HISTORIES/boulevard_casino.htm">BOULEVARD CASINO</a><a href="../STAKES HISTORIES/brighouse_belles.htm"> 
 BRIGHOUSE BELLES</a> 
 <a href="../STAKES%20HISTORIES/bc_derby.htm">BRITISH COLUMBIA DERBY</a> 
 <a href="../STAKES HISTORIES/bc_derby_con.htm">B.C. DERBY CONS.</a></td>
 <td width="25%" valign="top"> <a href="../STAKES%20HISTORIES/oaks.htm">BRITISH COLUMBIA OAKS</a><a href="../STAKES%20HISTORIES/burnaby.htm"> 
 BURNABY</a><a href="../STAKES%20HISTORIES/city_vancouver.htm"> 
 </a><a href="../STAKES HISTORIES/chris_loseth.html">CHRIS LOSETH</a><a href="../STAKES%20HISTORIES/city_vancouver.htm"> 
 CITY OF VANCOUVER</a> 
 <a href="../STAKES%20HISTORIES/cths_2_fillies.htm">CTHS SALES 2-Y-O FILLIES</a> 
 <a href="../STAKES%20HISTORIES/cths_2_colts.htm">CTHS SALES 2-Y-O COLTS</a> 
 <a href="../STAKES%20HISTORIES/cths_3_fillies.htm">CTHS SALES 3-Y-O FILLIES</a> 
 <a href="../STAKES%20HISTORIES/cths_3_colts.htm">CTHS SALES 3-Y-O COLTS</a> 
 <a href="../STAKES%20HISTORIES/cover_girl.htm">COVER GIRL 
 </a><a href="../STAKES%20HISTORIES/delta_colleen.htm">DELTA COLLEEN </a> 
 <a href="../STAKES HISTORIES/derby_bar.html">DERBY EXPRESS</a><a href="../STAKES HISTORIES/derby_bar_ladies.html"> 
 DERBY EXPRESS LADIES
 </a><a href="../STAKES%20HISTORIES/emerald_downs.htm"> 
 EMERALD DOWNS</a> 
 <a href="../STAKES%20HISTORIES/fair_lady.htm">FAIR LADY 
 </a><a href="../STAKES%20HISTORIES/fantasy.htm">FANTASY</a> 
 <a href="../STAKES%20HISTORIES/george_royal.htm">GEORGE ROYAL</a></td>
 <td width="25%" valign="top"><a href="../STAKES%20HISTORIES/great_canadian.htm">GREAT CANADIAN</a> 
 <a href="../STAKES%20HISTORIES/hastings_sophmore.htm">HASTINGS SOPHMORE</a><a href="../STAKES%20HISTORIES/hastings_speed.htm"> 
 HASTINGS SPEED</a> 
 <a href="../STAKES%20HISTORIES/hong_kong.htm">HONG KONG JOCKEY CLUB</a> 
 <a href="../STAKES%20HISTORIES/jack_diamond.htm">JACK DIAMOND FUTURITY</a> 
 <a href="../STAKES%20HISTORIES/jim_coleman.htm">JIM COLEMAN PROVINCE</a> 
 <a href="../STAKES%20HISTORIES/john_longden.htm">JOHN LONGDEN 6000</a> 
 <a href="../STAKES%20HISTORIES/klondike.htm">KLONDIKE</a> 
 <a href="../STAKES%20HISTORIES/ladnesian.htm">LADNESIAN</a> 
 <a href="../STAKES%20HISTORIES/langley.htm">LANGLEY</a> 
 <a href="../STAKES%20HISTORIES/lassie.htm">LASSIE</a> 
 <a href="../STAKES%20HISTORIES/liberation.htm">LIBERATION 
 </a><a href="../STAKES%20HISTORIES/lt_governors.htm">LT. GOVERNORS</a> 
 <a href="../STAKES%20HISTORIES/mademoiselle.htm">MADEMOISELLE</a> 
 <a href="../STAKES%20HISTORIES/matriarch.htm">MATRIARCH</a>
 13</td>
 <td width="25%" valign="top"><a href="../STAKES%20HISTORIES/nanaimo.htm">NANAIMO</a> 
 <a href="../STAKES%20HISTORIES/new_westminster.htm">NEW WESTMINSTER </a> 
 <a href="../STAKES HISTORIES/pne_speed.html">PNE PRESIDENTS SPEED</a> 
 <a href="../STAKES%20HISTORIES/premiers.htm">PREMIERS</a><a href="../STAKES%20HISTORIES/richmond.htm"> 
 RICHMOND DERBY TRIAL</a> 
 <a href="../STAKES HISTORIES/river_rock_casino.htm">RIVER ROCK CASINO</a> 
 <a href="../STAKES HISTORIES/ross_mcleod.htm">ROSS MCLEOD 
 </a><a href="../STAKES HISTORIES/randall_plate.htm">S.W. RANDALL PLATE</a> 
 <a href="../STAKES%20HISTORIES/sadie_diamond.htm">SADIE DIAMOND FUTURITY</a> 
 <a href="../STAKES%20HISTORIES/senate.htm">SENATE APPOINTEE</a> 
 <a href="../STAKES%20HISTORIES/winston_churchill.htm">SIR WINSTON CHURCHILL</a> 
 <a href="../STAKES%20HISTORIES/strawberry_morn.htm">STRAWBERRY MORN</a> 
 <a href="../STAKES%20HISTORIES/sun.htm">SUN HANDICAP</a> 
 <a href="../STAKES%20HISTORIES/supernaturel.htm">SUPERNATUREL</a> 
 <a href="../STAKES%20HISTORIES/timber_music.htm">TIMBER MUSIC</a> 
 <a href="../STAKES HISTORIES/winston_churchill.htm">WINSTON CHURCHILL</a></td>
</tr>
</table>
 


<table width="626" border="0" align="center" cellpadding="0" cellspacing="0">
<tr>
 <td> </td>
</tr>
</table>
 
 
<table width="90%" border="0" align="center" cellpadding="0" cellspacing="0">
<tr>
<td align="center" valign="top"><img src="../cthslogoredsmall.gif" width="56" height="56"></td>
</tr>
</table>
</body>
</html>

Record does not get locked on update in a transaction

Hi ...
Lets say I have a session bean method with "Required" Transaction as follows:
public void method1()
entityBean1.setFieldA("something"); //record1
entityBean1.setFieldB("something"); //record1
entityBean2.setFieldZ("something");
Now, suppose one client thread "A" is executing this method and updating "record1"
and the Tx is still happening...
Lets suppose another client thread "B" simultaneously calls the same method to update
the same record "record1"...
what will happen now...since A is already in a Tx updating record1, what happens
to B...
shouldn't there be a lock on the record which A is updating till the Tx gets commited
, and only then B should be able to update that record...?
Is my understanding correct ??
I did a test with weblogic and this does not seem to be happening..
whatz missing guys ...or am i barking up the wrong tree ?
Thanx,
Krish

READ_COMMITED.
Emmanuel Proulx wrote:
The default is 'database' concurrency strategy, with isolation level set by
the database. I don't know the default for Oracle 8i.
My point was you can set it.
Good luck,
Emmanuel
"Krish Venkat" <[email protected]> wrote in message
news:[email protected]..
I have not set either of that property in my entity bean...so I guess itshud pick
up the default ...I use Oracle 8i...
Krish
"Emmanuel Proulx" <[email protected]> wrote:
This all depends on how things are configured:
- database transaction isolation level (tag <transaction-isolation> of
weblogic-ejb-jar.xml)
-concurrency strategy (tag <concurrency-strategy> of
weblogic-ejb-jar.xml)
See DTD for more details. (weblogic?00-ejb-jar.dtd files in weblogic.jar)
Emmanuel
"Krish Venkat" <[email protected]> wrote in message
news:3cf6e7f4$[email protected]..
Hi ...
Lets say I have a session bean method with "Required" Transaction asfollows:
public void method1()
entityBean1.setFieldA("something"); //record1
entityBean1.setFieldB("something"); //record1
entityBean2.setFieldZ("something");
Now, suppose one client thread "A" is executing this method and
updating
"record1"
and the Tx is still happening...
Lets suppose another client thread "B" simultaneously calls the samemethod to update
the same record "record1"...
what will happen now...since A is already in a Tx updating record1,
what
happens
to B...
shouldn't there be a lock on the record which A is updating till the Txgets commited
, and only then B should be able to update that record...?
Is my understanding correct ??
I did a test with weblogic and this does not seem to be happening..
whatz missing guys ...or am i barking up the wrong tree ?
Thanx,
Krish
Rajesh Mirchandani
Developer Relations Engineer
BEA Support

I can not get amd graphics update to download keeps telling me error in download process

HP Pavilion G6 can't get amd graphics driver to download or update ...keep getting error message that needs downlaoded and then error message that downlaod error occured. Not sure what to do.

Krypt0nit3 wrote:
I've got the same problem
HP PAVILION G6 1007SL LQ645EA . please help me .
I had no problem downloading sp55081 (the AMD switchable graphics software & driver) from here. It is a large software package at 174.98MB, but it will download.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Agents not getting SCOM UR4 Update Patch

Similar Messages

Maybe you are looking for