AGENTS

how many agents can we create in ODI?
i want to run 5 interface with 5 different agents at a time can we do that?

Hi,
You can have as many as agents ( i am not sure about if there any limitations on licensing). For agent questions please follow the below threads,
Re: Questions on Scheduling and Running an Agent and Scenario
Re: scheduler porblem
Re: Scheduling - odiparams.bat ?
Re: agentscheduler creation error
And more....
Thanks,
G

Similar Messages

Custom clearing agent payment issue

Dear experts
Purchase order was created and the material was received on port (imports).
custom clearing agent has cleared the goods.
now custom clearing agent needs his charges.
the inv from vendor with reference to PO is not received.
any solution to settle the custom clearing agent payments.
till the inv. from vendor not received custom agent payment is is pending.
what should be done to resolve this issue.

Hi,
Copy one of your freight condition types and create a new condition type as custom clearing charges, please ensure that condition category is Delivery charges (B). In calculation schema enter this condition type at the appropriate position. Now when creating the PO, enter this condition type put the value, then select this condition type and go to details, here you will have a field to enter the vendor code, there key in the vendor code of custom clearing agent.
Now in MIRO enter PO no. and choose layout for Planned delivery cost, you can now enter the value for your agent and pay him.
Note: Please use this to pay only for service charge for the agent, for payment of custom duty you should use the condition type for custom duty and key in the vendor code for the customs clearing office there so that its easy to differentiate between custom duty and the service charges charged by clearing agent.
Regards
Chandra Shekhar

Follow up in IC Agent

HI experts,
I have a requirement where i need to create a follow up of business activity in IC agent ( BZ ROLE : UTIL_IC ). I have developed objects and even getting correct follow up transaction in pop up. When I select the follwo up from POP UP , it should open the view of transaction selected. But nothing is happening on selection.
Can anyone suggest.
Thank you.
Regards,
Vishal

Hi ,
I solved it myself.
Thank you.
Regards,
Vishal

Getting error while running Agent in obiee 11g

Hi,
We are using external table authentication in our application. We created 10 user in the table, when we are logging to the application we are able to log in.
After log in when we are creating Agent and click on run, it is showing error as [nQSError: 13024] Successful completion of init block 'security1' is required. (08004)
Security1 is our initialization block for authentication. But when I create one user in console and give admin priviledges to that user and try to run same agent, it is running fine.
Please let me know if I miss something or anything else need to configure.
Thanks
Anirban

Hope you have strictly followed the steps mentioned in the document:
http://docs.oracle.com/cd/E21764_01/bi.1111/e10543/legacy.htm#BABGEHJJ
Specifically note : Oracle BI Scheduler Server runs Delivers jobs for users without accessing or storing their passwords. Using a process called impersonation, Oracle BI Scheduler uses one user name and password with Oracle Business Intelligence administrative privileges that can act on behalf of other users. Oracle BI Scheduler initiates an Agent by logging on to Oracle BI Presentation Services with the Oracle Business Intelligence administrative name and password.
For Delivers to work, all database authentication must be performed in only one connection pool, and that connection pool can only be selected in an initialization block for the USER system session variable. This is typically called the Authentication Initialization Block. When impersonation is used, this initialization block is skipped. All other initialization blocks must use connection pools that do not use database authentication.
Hope this helps.
Thanks and regards,
Debarati.

Error While executing a SSIS package which contains a script task through SQL Server Agent job

Hi,
I have a SQL Server 2012 SSIS package with a script task along with other tasks [data flow, execute sql tasks ]. When I manually executed the job through BIDS, its completed successfully.
Then I have automated the execution of the package through SQL Server Agent Job. But when I executed the package through SQL Agent job, it runs successfully for all the tasks except script task. When it comes to execute the Script Task, it is getting failed
with the below error message.
"Error: 2012-08-29 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
I have installed the SSIS on the 64-bit environment and SSIS service is running. Also I tried to run the job through 32 bit [job option] but I am getting the above error in all cases.
Any help will be greatly appreaciated !
Thanks,
Navin
- naveen.reddy

Hi Arthur,
My script task access the excel files in a network share, refresh them all and save them. When I execute the ETL manually or thru DTEXEC, it is executing successfully. I am facing the issue when I am executing thru SQL Agent Job only. Logging also showing
the same error.
"Error: 2012-08-23 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
- naveen.reddy

Error after creating a new item in 'Case Worker'-- 'Agent Dashboard'-- 'Task Details' screen

In 'Case Worker'-->'Agent Dashboard'--> 'Task Details' screen, I have created a item named 'YEARS' using 'Create Item' in 'Personalize Page' screen. It is not going to tasks page and giving error as "
oracle.apps.fnd.framework.OAException: No entities found, entityMaps not defined for attachment item (YEARS)." How can I remove this field now..

Please see the suggested solutions in the following docs.
Entity Maps Not Defined For Attachment Error When Selecting A Deliverable (Doc ID 358385.1)
Corrupt Personalization - No Entities Found Entitymaps Not Defined For Attachment Item (Doc ID 1085011.1)
R12:Supplier Page Unexpected Error: 'No Entities Found EntityMaps not Defined for Attachment Item' (Doc ID 1361320.1
Geography Hierarchy No Entities Found, EntityMaps Not Defined For Attachment Item (Doc ID 831088.1)
Depot Repair Bulk Receiving Error: "No entities found, entityMaps not defined for attachment item" (Doc ID 1357977.1)
Thanks,
Hussein

Dynamic Creation of Physical Data Server / Agent cache Refresh

Scenario:
I have a requirement to load data from xml source to oracle DB, and the xml source will change at run time,but the xsd of the xml would remain same ( so I don't have to change the Logical data Server, models, mappings, interfaces and scenarios - only the Physical Data Server will change at runtime).I have created all the ODI artifacts using ODI studio in my Work Repo and then I'm using odi sdk to create the physical dataserver for the changed xml data source and then invoking the agent programmatically.
Problem:
The data is being loaded from the xml source to oracle DB for the first time, but it is not working fine from the second time onwards. If I restart the agent, it is again working fine for one more time. on the first run, I think the agent maintains some sort of cache for the physical data server details and so when ever I change the data server, something is going wrong and that is leading to the following exception. So I want to know, if there is any mechanism to handle dynamic data servers or if there is any way of clearing the agent cache, if any.
Caused By: org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 41, in <module>
AttributeError: 'NoneType' object has no attribute 'createStatement'
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1596)
     at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:582)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
     at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1070)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$1.run(DefaultAgentTaskExecutor.java:50)
     at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:50)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor.executeAgentTask(DefaultAgentTaskExecutor.java:41)
     at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.doExecuteAgentTask(TaskExecutorAgentRequestProcessor.java:93)
     at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.process(TaskExecutorAgentRequestProcessor.java:83)
     at oracle.odi.runtime.agent.support.DefaultRuntimeAgent.execute(DefaultRuntimeAgent.java:68)
     at oracle.odi.runtime.agent.servlet.AgentServlet.processRequest(AgentServlet.java:445)
     at oracle.odi.runtime.agent.servlet.AgentServlet.doPost(AgentServlet.java:394)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
     at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:503)
     at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:389)
     at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216)
     at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
     at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
     at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:417)
     at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
     at org.mortbay.jetty.Server.handle(Server.java:326)
     at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:534)
     at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:879)
     at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:747)
     at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:218)
     at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
     at org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
     at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)

Hi ,
If you want to load multiple files ( same structure) through one connection then in topology create M.XSD for M.XML file
Create three directories
RAW -- It will contain file with original name
PRO- Processing area where file will be moved one by one & renamed it as M.XML.
OUT- Once file data will be loaded into tables move the file M.XML from PRO to OUT.
Go to odiexperts to create loop,
Use odifilemove ( to move & rename/masking) to move A.XML from RAW to PRO & rename to M.XML
use ODIfilemove to move M.XML to OUT folder & then rename back to A.XML
Use variables to store file names & refresh
NoneType' object has no attribute 'createStatement' : It seems that structure of your file is different & your trying to load different files in same schema. If stucture is same then use Procedure "SYNCHRONIZE ALL" after every load...
Edited by: neeraj_singh on Feb 16, 2012 4:47 AM

Using Bitlocker Data Recovery Agent (DRA) on Surface Pro 3

We currently have the Data Recovery Agent (DRA) configured in our Bitlocker Policy for our Windows 7 Systems, and it works fine. In situations where the Recovery Key for the computer object was not backed up to AD correctly for whatever reason or the computer
object was deleted, our HelpDesk can connect the encrypted drive to another system, and then use the certificate for the DRA to unlock the drive.
I'm wondering if the BitLocker DRA Certificate unlock method will work for Surface Pro 3 devices, in the case that that their computer object and normal BitLocker recovery key is deleted or missing in AD for whatever reason. Seeing as how our helpdesk can't
easily remove the internal HD from a Surface Pro 3 (I think only MS can do this?), I'm wondering if this BitLocker recovery option is still an option for Surface Pro 3's and if it is not then if there is another recommended option for Surface Pro 3's and/or
other Windows 8.1 Tablets used in an enterprise environment.

noctlos wrote:
Using linux-3.18 and -3.19 kernels, with wayland/weston v. 1.7. In its own tty, i try to run weston, and I get the following stderr:
Could anyone help me to figure this out? Thanks.
Seems that the problem lies in libinput. Maybe you can report that upstream. I suggest you recompile libinput with debug info and do not strip the binaries to obtain better backtraces.
Edit:
I have also tried running `swc-launch -- velox`, and get the following error:
Running on /dev/tty2
velox: error while loading shared libraries: libinput.so.5: cannot open shared object file: No such file or directory
Server exited with status 127
Restoring VT to original state
So, perhaps I am having some libinput trouble. Does this seem correct?
Well, that's a different problem. libinput has several soname bumps because of API and ABI incompatibility. You have to rebuild swc against the newest libinput. (Although I'm not sure if swc developer updated the code to new API)
Edit 2:
Just to tack this on here for `gnome-session --session=gnome-wayland --debug`
I'm not expert on this, it may be related to libinput problem. If you don't include GDK_BACKEND=wayland environment variable when launching gnome-wayland.
Last edited by jdbrown (2015-03-01 08:04:39)

Cannot perform a clean install of CF 10 - ODBC Agent and ODBC Server are not in Services - Win2k8 R2

I've tried to perform a clean install on a Win2k8 R2 x64 server several times and I can't seem to get it to install.
I was upgrading from CF 9, which took several attempts. I eventually got CF 10 working and running with the latest updates. But the server would only run for about 15 minutes and everything would come to a screaching hault. ColdFusion pages would fail to load with no error. The pages would hang and wait for the server to respond, which it never did. Restarting IIS would fix the problem.
I have about 20 CF sites on the machine. I came accross an article that talked about pool sizes, etc. I ended up trying a few things with the Web Server Configuration Tool, and as I was adding/deleting servers, I got an error that some application unexpectedly quit, but it wasn't the wsconfig tool. This happened about 3 times as I was deleting servers that I had previously added. Then I tried loading the CF Admin and I got a 500.0 internal server error.
So I bit the bullet and figured I would start all over again. I uninstalled CF 10... now there's nothing on the machine. Re-installed CF 10, and I get the same 500.0 Internal Server Error. I uninstalled, restarted, installed... same thing. Then I found an error in the event viewer that reads:
The description for Event ID 0 from source ColdFusion 10 ODBC Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 10 ODBC Server error: 0
StartServiceCtrlDispatcher Error!
Then I found out that neither the ColdFusion 10 ODBC Agent or the ColdFusion 10 ODBC Server have been installed... at least they're not showing up in the list of services. msconfig also shows that they don't exist at all. I tried reinstalling several times and I can't get them to show up.
PS: It's 6:15 AM and I've been working on this since 10 PM last night. I NEED HELP! Thanks!

Hello,
Once you move your application from any prior version of ColdFusion to ColdFusion 10, you will have to tune your application, as the architecture changed from JRun to Tomcat.
You can refer to the article http://blogs.coldfusion.com/post.cfm/tuning-coldfusion-10-iis-connector-configuration for parameters, that needs to be tuned appropriately to make CF connector works flawlessly.
Hope this helps
Regards,
Anit Kumar

UCCX 7.0.1SR5 to 8.0 upgrade while also adding LDAP integration for CUCM - what happens to agents and Historical Reporting data?

Current State:
•    I have a customer running CUCM 6.1 and UCCX 7.01SR5. Currently their CUCM is *NOT* LDAP integrated and using local accounts only. UCCX is AXL integrated to CUCM as usual and is pulling users from CUCM and using CUCM for login validation for CAD.
•    The local user accounts in CUCM currently match the naming format in active directory (John Smith in CUCM is jsmith and John Smith is jsmith in AD)
Goal:
•    Upgrade software versions and migrate to new hardware for UCCX
•    LDAP integrate the CUCM users
Desired Future State and Proposed Upgrade Method
Using the UCCX Pre Upgrade Tool (PUT), backup the current UCCX 7.01 server.
Then during a weekend maintenance window……
•    Upgrade the CUCM cluster from 6.1 to 8.0 in 2 step process
•    Integrate the CUCM cluster to corporate active directory (LDAP) - sync the same users that were present before, associate with physical phones, select the same ACD/UCCX line under the users settings as before
•    Then build UCCX 8.0 server on new hardware and stop at the initial setup stage
•    Restore the data from the UCCX PUT tool
•    Continue setup per documentation
At this point does UCCX see these agents as the same as they were before?
Is the historical reporting data the same with regards to agent John Smith (local CUCM user) from last week and agent John Smith (LDAP imported CUCM user) from this week ?
I have the feeling that UCCX will see the agents as different almost as if there is a unique identifier that's used in addition to the simple user name.
We can simplify this question along these lines
Starting at the beginning with CUCM 6.1 (local users) and UCCX 7.01. Let's say the customer decided to LDAP integrate the CUCM users and not upgrade any software.
If I follow the same steps with re-associating the users to devices and selecting the ACD/UCCX extension, what happens?
I would guess that UCCX would see all the users it knew about get deleted (making them inactive agents) and the see a whole group of new agents get created.
What would historical reporting show in this case? A set of old agents and a set of new agents treated differently?
Has anyone run into this before?
Is my goal possible while keeping the agent configuration and HR data as it was before?

I was doing some more research looking at the DB schema for UCCX 8.
Looking at the Resource table in UCCX, it looks like there is primary key that represents each user.
My question, is this key replicated from CUCM or created locally when the user is imported into UCCX?
How does UCCX determine if user account jsmith in CUCM, when it’s a local account, is different than user account jsmith in CUCM that is LDAP imported?
Would it be possible (with TAC's help most likely) to edit this field back to the previous values so that AQM and historical reporting would think the user accounts are the same?
Database table name: Resource
The Unified CCX system creates a new record in the Resource table when the Unified CCX system retrieves agent information from the Unified CM.
A Resource record contains information about the resource (agent). One such record exists for each active and inactive resource. When a resource is deleted, the old record is flagged as inactive; when a resource is updated, a new record is created and the old one is flagged as inactive.

Reporting Services 2012 for SharePoint and SQL Server Agent "Subscriptions and Alerts"

After installing Reporting Services for SharePoint (Denali) in my test farm, I'm trying to configure the "SQL Server Agent" access for Reporting Services. From Central Admin I'm going to the Reporting Service applicaiton configuration screen and selecting
"Provision Subscriptions and Alerts". I've tried both options on this screen. I've manually executed the "download sql script" in SQL Server, as well as entering a user with SQL sys admin rights on the SQL server into the login fields on the screen.
The role and permissions have been created for the application pool service account, but Reporting Services is still trying to connect with the annonymous login because I'm getting the following alert each time I open the "Provision Subscriptions and Alerts"
screen:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
The "status" on the screen still shows "SQL Server Agent State cannot be determined". Has anyone else seen this?
Thanks!!

Thanks for your reply!
1) Looks like the new Reporting Services does not run as a Windows Service so it's not listed in the "Configure Service Accounts" pulldown. As a result, I don't see how to set the service account. It's only assigned to an application pool.
I installed it into an existing application pool and that application pool "is" in the list and has a domain service account already assigned.
2) Which users need to be in here in order to configure the "Provision Subscriptions and Alerts" screen? I already have the farm admin account which is the account I use when running Central Admin.
3) As mentioned in #1, I've installed Reporting Services into an existing application pool with other service apps.
4) This link is for Reporting Services 2008 R2 which is very different install process. But I did follow the SQL Server Reporting Services 2012 RC0 installation instructions and the Reporting Services is functioning correctly with no errors.
I'm just not able to configure the sceduling the alerting with interfaces with the SQL Server Agent.
Thanks!

Unable to start SQL server agent service

hi,
We have 2 Node SQL Cluster that was working fine. Then We migrated the Linux DNS to Windows DNS successfully.Now restarted the SQL Server after it when we try to start the SQL Server Agent service its says the below msg while machine name and cluster
entries are in windows dns and resolving the IP to name and name to IP
Error msg: The MSSQLSERVER service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service." error message.
But whenever we set the Linux DNS Server ip in SQL Servers then it successfully starts the service. Now i want to know why its happening and what are the requirements or DNS entries/SPN which we missing when we migrated the linux DNS to windows
dns
Sagar

I was experiencing this issue or one just like it on one of our SQL clusters (SQL Server 2008 R2, two node).
The fix for us was the database Security Login for: NT SERVICE\SQLAgent$<instancename> was missing. The actual service account assigned to the SQL Agent service was a valid domain account and we had the credentials correct in the service
configuration, so no changes were needed there.
Using SQL Server Management Studio we manually added this BUILT IN account ( NT SERVICE\SQLAgent$<instancename> ) to the instance, and then assigned it user role = sysadmin (to go along with the default role = public).
Once this was done, we tried to restart the clustered SQL Agent service and it started and remained started.
Hope this helps someone, we spent over a day pouring over the installation trying to find the cause.
This worked for me, thanks:-)

Unable to view SQL Server Agent while logged in as user

Hello Everyone,
I have granted SQLAgentUserRole permission to one of the user and using enterprise edition of SSMS. still user is not able to view SQL Server Agent. Any help will be greatly appriciated.

There is no Enterprise Edition of SSMS. There is SSMS Basic and SSMS Complete. Prior to 2012 sp1, only SSMS Basic were available with Express Edition - but as of 2012 sp1 Expredd also offers SSMS Complete. SSMS Complete is selected bu default when you install
SSMS (unless you are prior to 2012 sp1 and are using Express, of course).
However, even SSMS Basic *should* show Agent assuming you have permissions for that. This is hearsay, but from trusted sources. Here is what to do:
Check what is installed for the machine from where you are running SSMS. You can do that using SQL Server Installation Center - see this blog post: http://sqlblog.com/blogs/tibor_karaszi/archive/2011/02/10/what-does-this-express-edition-look-like-anyhow.aspx
(towards the end).
On that machine try both this problematic account as well as an account which is sysadmin. Does the sysadmin account see Agent? If so, you know permissions aren't granted properly. If not, then you know the tool is the problme.
Also try the problematic account from a machine where you know you see Agent normally. Again, this will help you assess whether the problem is the tool (SSMS) or permissions for the account.
Tibor Karaszi, SQL Server MVP |
web | blog

Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

No agents found, error message.

For mass mutations in PPOME we drag and drop Employees from one to the other place.
When we make a new organizational unit in the future, for example 30.12.2008, this isn't really a problem.
Then we put an employee on this organizational unit at 30.12.2008.
This won't work, and the system refers to Infotype 1 of the PA data.
SAP returns; Structure 01 O: No agent found.
When we put the employee at an organizational unit in present (on a OU which already exists for a longer time) there is no problem.
anyone an idea?? This one's wurth max points for the right answer.
kind regards.

Hi, thanks for your answer, but we already use PA40 for regular changes.
When there is a large piece of our concern is changing, PA40 is just too slow.
In stead of transfer each person with PA40 and fill a procedure for these people. We use PPOME to transfer multiple employees to another Organizational Unit.
We know there will not be a procedure of that action, that is not really a problem.
The real problem is the error message "No agent found" when updating Infotype 0001 of the PA Record.
This has worked for us, but now we are working with workflows, planning on qualifications and more.
If someone has got a suggestion to find the key to our problem, feel free to reply.
(points are still available)

The agents are not getting determined

Hi Gurus,
In the standard workflow WS00300022 with BUS 2104 for Approval of Appropriate request, the agents are not getting determined.
Below are the steps followed:
We have created a subtype for BUS 2104 and redefined the display and edit to add some new functionality. Delegated the business object and followed all the standard steps. Now the present situation is that the Workflow is not able to determine agents.
We have even removed the subtype and checked with the standard functionality but still it is not determining the agents.

Hi,
Kindly Diagnose your WF:-
Use the following transaction:-
1> SWE4/SWELS -> EVENT TRACE ON/OFF (Switch On the Event Trace)
2> SWEL -> DISPLAY EVENT TRACE
3> SWUD -> WF DIAGNOSTICS
4> SWPR -> WORKFLOW RESTART AFTER ERROR
Enter the WF Number and Click on the LOG Icon.
There you can see the Graphical Log of the WF to know where the WF is stuck.
And You can also check the Technical Details of the WF there, to find which WF Container has what value.
In the LOG, you can determine the step where it is unable to determine the Agent. That will give a picture of how to proceed further and what is the WF status at that point.
Kindly check and revert back, so that a solution can be provided.
Regards,
Kanika

AGENTS

Similar Messages

Maybe you are looking for