Agere Ethernet Controller (ET-131x) - unable to install the driver

I need to install the following wired NIC:
01:00.0 Ethernet controller: Agere Systems|ET-131x PCI-E Ethernet Controller (unknown)
It seems that the "et131x" kernel module is necessary.
The web site bellow gives instructions on how to install the driver from sources:
http://dadams1969.googlepages.com/et131xkernelmodule
Unfortunatly I am unable to do it.
I have also tried to install the module compiled by a member at the following address:
http://www.archlinux.org/~tom/packages/
The module seems to be installed properly. A new folder is created in /lib/modules/
However, I am unable to load it.
# modprobe et131x.ko
FATAL: Module et131x.ko not found
#insmod et131x.ko
insmod: error inserting 'et131x.ko': -1 Invalid module format
Am I doing something wrong?
NB:
The module has been compiled for the 2.6.20 kernel and I am using 2.6.22 (i686)...
Last edited by sylvain77 (2007-09-26 08:23:48)

Heh... I had competely forgotten that I had done that, so now I feel morally obliged to help you.
I just tried a rebuild against 2.6.22 and it failed, but after a little digging around, I found a patch, and now it builds. I can't tell you if it works or not, as I don't have the hardware.
Get the new package in the same place as before, and let me know how it goes.
It's worth noting that this code is 6 months old at this stage, and the project doesn't seem to be very active. There's one 4-mail thread about it on lkml.org, with no indication that this will ever be merged to mainline.

Similar Messages

  • I am Unable to install the driver for my Kodak ESP-3 on Windows 7 64 bit

    I have gone to the Kodak site and dowloaded and ran the software and Windows is still unable to detect the printer.  all the other Easyshare software is successfully installed.  Windows is recognising it as a scanner (as it is an printer/scanner
    combo 'All-in-One-printer') which works but i can not print.  There is no error message other that 'Windows has not installed the drivers successfully' but is recognising the type of device as Kodak EasyShare Aio (camera).
    I have Windows 7 Home Preimium 64-Bit SP1.
    Please Help.

    Hi,
    If you installed the All-in-One Printer Software, you may navigate to the following path to open printer configuration:
    a. Select Start > Programs (or All Programs) > Kodak > KODAK Printer Setup Utility.
    b. Follow the on-screen instructions to set up the printer.
    Also, you could contact the KODAK support for further help.
    Alex
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • HT4623 While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

    While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

    I am getting this message also.... mine cant update too...

  • Can not update Itunes to 7.4... Unable to install Gear Drive???

    I had this problem before, but my daughter just received the new Ipod Classic and itunes, again needs to be updated. Why can no one answer this one question? When trying to update itunes I always get this error message: *"Unable to install the GEAR driver set at this time. The GEARAspiWDM service used by the GEAR driver set is scheduled to be deleted to be deleted during the next system reboot. Please reboot the system and run itunes again."*
    I can reboot the system FOREVER and still get the same response. CAN ANYONE PLEASE GIVE ME SOME FEED BACK!!! Thank You
    <SCRIPT type=text/javascript>_popupControl();</SCRIPT>

    Does this help?
    http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452

  • Unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw in windows 7 64 bit

    HI 
    am unable to install   the scanner on the  HP LaserJet Pro 200 color MFP M276nw Drivers in windows 7 64 bit  , after runing the setup ,the printer will finshing the installation process and and it will show that the HP Scan and HP fax failed. 

    Hi @Chembo ,
    I see you're experiencing issues installing the printer software. I will do my best to assist you with this issue.
    I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
    Restart the computer.
    Disconnect the USB cable from the printer.
    Run the uninstall from the CD.
    Go start, computer, right click on the CD for the printer, left click open in a new window, double click on uninstall.
    Make sure that the print spooler service is running.
    Right-click Print Spooler, and then click Properties.
    If the Startup type is set to Manual or Disabled, click the drop-down list, click Automatic, and then click Apply.
    Under Service status, click Stop and then Start, and then click OK.
    Run the installation again and don't connect the cable until prompted.
    Test the printer.
    Then you will have to go back and enable the Startup programs, Microsoft Services and turn the Antivirus Software back on again.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
    I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
    At that point, a "Close" button is pulsating blue at the bottom of the window.
    Sorry for the tedious detail. Anything revealing there?
    Thanks!

  • Unable to install the latest version of Adobe Muse via Adobe Application Manager

    I´m a user of Creative Suite applications  and all of them have been updated successfully with the exception of the latest version of Adobe Muse.
    I´m unable to install it. I get error DW 050
    I´m using Windows 7 64 bit.
    All previous versions of Adobe Muse have been installed OK.
    Following a forum discussion I could read, I uninstalled the previous version, but the installation fails again.
    Does any body know how to solve this issue?

    Dear Sachin:
    Thank you for your help, however I have to get back to you to inform that after  downloading the new package based on the link that you´ve provided, I´m  still unable to execute the application.  I get the message: “block by the administrator”  and also another message: “the editor of this program is unknown and unsafe”. Please note that all other programs from Adobe´s Creative Cloud have been downloaded and installed with success. All Adobe Creative programs have been installed on my computer several months ago and all are working fine so far.  This morning I installed an update for Photoshop without  any problem. It seems that the problem persists only with Muse. I have to highlight that I´m the administrator of my PC and therefore all applications are currently being executed as administrator. I have never had the intention to block any program, including obviously Adobe´s Creative Suite programs.
    Could you please let me know how to splve this problem?
    Michael.
    De: Sachin Hasija [email protected]
    Enviado el: lunes, 28 de enero de 2013 18:57
    Para: retonxxy
    Asunto: Unable to install the latest version of Adobe Muse via Adobe Application Manager
    Re: Unable to install the latest version of Adobe Muse via Adobe Application Manager
    created by Sachin Hasija <http://forums.adobe.com/people/Sachin+Hasija>  in Help with using Adobe Muse - View the full discussion <http://forums.adobe.com/message/5028441#5028441

  • I'm unable to install the Mac os x 10.7.3 update.  I get an error message each time my macbook tries to install the downloaded updates.  Can anyone help me?

    Each time my macbook restarts and tries to install the downloaded software updates, I get an error message telling me that there might have been an error during the download process of the updates and that he's unable to install the updates.  What can I do?

    What are you trying to download? If you are referring to the recent security update, just ignore the error and select the option to open the installer. It's fine.

  • I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

    I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

    U44.. update error http://forums.adobe.com/thread/1289956 may help
    -more U44.. discussion http://forums.adobe.com/thread/1275963
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • I am unable to install the creative cloud update - error 43 comes up at around 77%

    I am unable to install the creative cloud update - error 43 comes up at around 77%. I'm a relatively new user.

    WIthout proper system info and the detailed error report nobody can say much. Most likely you run out of disk space.
    Mylenium

  • Unable to install the Novell File Upload extension to upload directories

    Using Firefox 9.0.1 on Windows 7 I'm unable to install the Novell File
    Upload extension to upload directories.
    As per the pop-up help page, I've added
    extensions.install.requireBuiltInCerts in about:config and set it to
    false but that has made no difference, even after restarting the browser.
    I've also tried this with Firefox 9.0.1 on Mac OS X Snow Leopard
    (10.6.8) - unsupported I know - with the same result.
    Do I really have to use Internet Explorer? Urgh!
    Simon
    Novell/SUSE/NetIQ Knowledge Partner
    Do you work with Novell technologies at a university, college or school?
    If so, your campus could benefit from joining the Novell Technology
    Transfer Partner (TTP) program. See novell.com/ttp for more details.

    On 19/01/2012 18:11, craig wilson wrote:
    > You should trust the ZCM CA and the error will go away.
    > It's not expected to get that error.
    > Managed Devices especially will have loads of issues if the ZCM CA is
    > not trusted.
    So, with Firefox, first hitting http://<server>/zenworks/ after install
    displays
    --begin--
    This Connection is Untrusted
    You have asked Firefox to connect securely to <server>, but we can't
    confirm that your connection is secure.
    Normally, when you try to connect securely, sites will present trusted
    identification to prove that you are going to the right place. However,
    this site's identity can't be verified.
    What Should I Do?
    If you usually connect to this site without problems, this error could
    mean that someone is trying to impersonate the site, and you shouldn't
    continue.
    [Get me out of here!]
    > Technical Details
    > I Understand the Risks
    ---end---
    so I click "I Understand the Risks", [Add Exception...] then [Confirm
    Security Exception] at which point http://<server>/zenworks/ correctly
    displays and I can log in. Checking Tools | Options | [View
    Certificates] shows an (Unknown) server certificate for <server> with a
    Permanent lifetime.
    Is that what you mean by trusting the ZCM CA?
    Perhaps this is why Firefox 9.x is not a supported browser though I
    thought that was more to do with Mozilla treating major version numbers
    as minor ones? Gee if only Firefox hadn't automatically upgraded itself
    from 8.x to 9.x!
    Thanks.
    Simon
    Novell/SUSE/NetIQ Knowledge Partner
    Do you work with Novell technologies at a university, college or school?
    If so, your campus could benefit from joining the Novell Technology
    Transfer Partner (TTP) program. See novell.com/ttp for more details.

  • Unable to install the updated version of iTunes

    Hi All.
    I am unable to install the updated version i.e. 10.7 iTunes. I have downloaded it and while installing process it moves until the last and rolls it back.
    I have uninstalled itunes and tried again. Could not downloaded. Sowhow I have donloaded the version 10.1 which is no more compatible for my iPhone 4S with iOs 6.
    I have read through many threads on the same topic but did not help. Please help here with any suitable idea.
    Thanks,
    Shan

    "There is a probelem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your suppor personnel or package vendor."
    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Unable to Install the update in my JDeveloper 10.3.1

    Please help me what is the exact problem as i am unable to install the update in my JDeveloper

    Can you be more specific about your problem? What did you try to do? what problems did you encounter?

  • T510 unable to install the Nvidia NVS3100 under XP

    Hi for some reason we had to install windows XP instead of windows 7 on a T510 with the NVS3100 video card;
    I'm unable to install the Nvidia driver 6md136ww.exe!  The program gives me an error cannot find the driver for your hardware.  
    I really need help.
    ref:  
    PCI\VEN_10DE&DEV_0A6C&SUBSYS_21D817AA&REV_A2\4&26E957CF&0&0008
    T510
    4313-cto
    Solved!
    Go to Solution.

    Hi and welcome to the forum!
    Do you have Nvidia Optimus model or just plain Nvidia with switchable graphics? See this support page, verify and then let us know.
    Keep us posted.
    Edit: Also, did you change switchable to discrete in the BIOS before installing the driver? I don't believe XP supports switchable graphics, further is your XP updated to SP3? This is a requirement.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Trying to upgrade to 7.7, unable to install to drive F

    I am trying to upgrade to 7.7 and the download comes in but the install fails saying "unable to install to drive F". How do I change this as my current itunes is on drive c. No drive F is available.

    Hello FlaOne,
    Welcome to the HP Forums.
    I see that you have downgraded the operating system back to Windows 7.
    So I can better assist you, please respond with your printers Model Number:
    How Do I Find My Model Number?
    Once I have the printer model number, I can then research the issue and attempt to find suitable troubleshooting steps.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

Maybe you are looking for