Agewise stock report data missmatch in SAP BI ?

Dear Experts,
While in R/3 for material No 49214 total stock quantity is 29,0000
But after executing the query Agewise stock for the same material No 49214 total stcok quantity is showing 27,0000 .
How to match both the total stcok qauntity.?
Regards,
Asit

Hi,
But after executing the query Agewise stock for the same material No 49214 total stcok quantity is showing 27,0000 .
Do you mean BEx Report? If yes, the you need to first look in the Infoprovider level --> PSA Level and in R/3 side RSA3.
Check if you have any Conditions or Restrictions in the Query.
Regards,
Suman

Similar Messages

Agewise Stock Report using FIFO out of 0IC_C03

Hello,
I have a requirement where I need to create agewise stock report using FIFO. I have the stock availability from 0ic_c03.
Can any one plese tell me how to achieve the FIFO based agewise stock. I have various age buckets like 0-30 , 30-60, 60-90 etc.
If the total stock is made up of multiple receipts and I also have few issues, how can I get the balance stock based on FIFO using the GR date.
I would appreciate your help.
Regards
Vasun

Hi,
This InfoCube allows you to evaluate stocks from ERP.
A new feature in this InfoCube is the pre-existing stock key figure Valuated Stock Quantity (0VALSTKQTY) and the associated movement key figures Receipt Quantity Valuated Stock (0RECVALSTCK) and Issue Quantity Valuated Stock (0ISSVALSTCK).
This is made possible by including the InfoObject indicator Evaluation Special Stock (0INDSPECSTK) in the InfoSource Material Stocks (as of SAP BW 3.1 Content) (2LIS_03_BX). The InfoSource used up until now, Transfer BW: Stock (2LIS_40_S278), did not recognize this InfoObject.
Note the Remarks on Filling Non-Cumulative InfoCubes.
The following Basis key figures can be restricted in the query definitions to stock categories (0STOCKCAT), such as project stock, and to stock types (0STOCKTYPE), such as quality inspection:
·        Quantity of Valuated Stock (0VALSTCKQTY)
·        Receipt Quantity Valuated Stock (0RECVALSTCK)
·        Issue Quantity Valuated Stock (0ISSVALSTCK)
In this way, for example, you can evaluate the quantity of valuated project stock (Q).
The newly-included Basis key figures are only updated through the InfoSources 2LIS_03_BX and 2LIS_03_BF.
In this way, none of these Basis key figures can be used in queries that are built up on InfoCubes which were inventory-initialized through InfoSource 2LIS_40_S278. Moreover, the queries 0IC_C03_Q0013 to 0IC_C03_Q0016 cannot be used in the combination of InfoSources 2LIS_40_S278 and 2LIS_03_BF.
Note the following procedures when filling the InfoCube 0IC_C03 for the first time with non-cumulative data from ERP:
       1.      Create non-cumulatives with the program BW: Initialization of Opening Non-Cumulatives in Transfer Structure (RMCBINIT_BW).
       2.      Initialize the movements/revaluations with the program RMCBNEUB/RMCBNERP.
       3.      Post in the InfoCube using the update method Creation of Non-Cumulatives from the InfoSource 2LIS_03_BX.
       4.      Post in the InfoCube using the update method Initialization of the Delta Process from the InfoSources 2LIS_03_BF and 2LIS_03_UM.
Refer to SAP Note 0643687 (Compression of Non-Cumulative InfoCubes) regarding the subsequent steps for compression.
       5.      Compression of the request from 2LIS_03_BX with update of the marker.
       6.      Because in this case you are posting movements and revaluations in the InfoCube that occurred before the non-cumulative creation and which lead to this non-cumulative creation, you must execute a compression without updating the marker. For more information, see InfoCubes.
       7.      Thereafter, you can transfer new movements and revaluations to the BW system as usual (for performance reasons, we recommend that you regularly compress with updates of the marker, see also InfoCube Compression).
Update Logic
When updating the DataSources 2LIS_03_BX, 2LIS_03_UM and 2LIS_03_BX, the System applies the following logic:
Characteristic Value Calculation
In principle, values are updated with Plant, Material, and Stock Category only. Quantities are updated with these characteristics, as well as with Storage Location, Batch Number, and Stock Characteristic (see also SAP Note 589024: Evaluations in BW with the Characteristics Storage Location and Stck Char.).
Key Figure Value Calculation
The source field for quantities is the field CPQUABU, and for values it is the field CPPVLC.
In the update, the InfoSource fields Stock Characteristic and Stock Category control whether "special stock" key figures are updated, such as Quality Stock or Stock in Transit (only relevant for 2LIS_03_BF and 2LIS_03_UM).
The general key figures (for example, Total Stock), however, can also be restricted in queries to Stock Characteristic and Stock Category, and then deliver the same result (key word: account model versus key figure model).
The values for Stock Characteristic and Stock Category are dealt with on the extractor side in the LMCB1F20 include (routine STA_VERAENDERUNG).
The InfoObject 0INDSPECSTK (field KZBWS) also controls whether the sales order stock / project stock is valuated or non-valuated.
The system valuates the transaction key to decide whether the issue movement key figure or receipt movement key figure is updated. For more information, see SAP Note 492828: Determining the transaction key for 2LIS_03_BF + 2LIS_03_UM.
InfoSources
This InfoCube is based on the following InfoSources:
·        2LIS_03_BX
·        2LIS_03_BF
·        2LIS_03_UM
Characteristics
InfoObject
Description
0MATERIAL
Material
0PLANT
Plant
0STOR_LOC
Storage Location
0BATCH
Batch Number
0STOCKTYPE
Stock Type
0STOCKCAT
Stock Categories
0GN_VENDOR
Vendor
Time Characteristics
InfoObject
Description
0CALDAY
Calendar Day
0CALMONTH
Calendar Year/Month
0CALWEEK
Calendar Year/Week
0CALYEAR
Calendar Year
Key Figures
InfoObject
Description
0RECVS_VAL
Value Received - Valuated Stock
0VALSTCKVAL
Value - Valuated Stock
0ISSVS_VAL
Value Issued - Valuated Stock
0ISSBLOSTCK
Issue Quantity - Blocked Stock
0ISSCNSSTCK
Issue Quantity - Consignment Stock
0ISSQMSTCK
Issue Quantity - Inspection Stock
0ISSTRANSST
Issue Quantity - Stock in Transit
0RECBLOSTCK
Receipt Quantity - Blocked Stock
0RECCNSSTCK
Receipt Quantity - Consignment Stock
0RECQMSTCK
Receipt Quantity - Inspection Stock
0RECTRANSST
Receipt Quantity - Stock in Transit
0QMSTOCK
Inspection Stock
0BLOCKEDSTK
Blocked Stock
0CNSSTCKQTY
Quantity - Consignment Stock
0TRANSSTOCK
Stock in Transit
0ISSSCRP
Issue Quantity - Scrap
0ISSVALSCRP
Issue Value - Scrap
0RECTOTSTCK
Receipt Quantity - Total Stock
0ISSTOTSTCK
Issue Quantity - Total Stock
0TOTALSTCK
Quantity - Total Stock
0ISSVALSTCK
Issue Quantity - Valuated Stock
0RECVALSTCK
Receipt Quantity - Valuated Stock
0VALSTCKQTY
Quantity - Valuated Stock
0VENCONCON
Consumption Value - Vendor Consignment Stock
Units
InfoObject
Description
0LOC_CURRCY
Local Currency
0BASE_UOM
Base Un
Regards,
Hareesh

Stock Report Date Wise

Dear All
I am devlop new Stock Report Date wise
my output follows
Material Plant Storagelocaton Saleorder OPenning stock Closing Stock Total
Which Table stored that details?
how will calculated?
Thanks and Regards
Suresh

hey
i think the following tables
will be helpful for the report:-
1>MARA
2>MBEWH
3>MSEG
4>VBRP
hope this will help
good luck
harry.

How to View SE38 Report data on to SAP Widget?

Hello Every body,
I am new to widgets, I have lots of questions to you guys....
I know how to create a Widget using a Remote Function Module/RFC but can any one tell me how can I create a Widget for SE38 report program??
Please share you knowledge if you have done one....
Thanks in advance,
Anil Raparthi

This works for some data
iPhone Backup Extractor for Windows and Mac
Better to purchase or borrow an iPod, iPad or iPhone with at least the iOS of your lost iPod and restore that device from the backup of your old iPod.

Tax Reporting Date for Cz Republic in report S_ALR_87012357/RFUMSV00

Hi All,
We activated Tax reporting date as per SAP Note 1023317. However we are not able to see in the report "S_ALR_87012357 / RFUMSV00" tax reporting date column which should show which document has which date assigned to it. I executed the report with tax reporting date.
Please help me to find out how to get the column in this report.
Regards,
Abishek

hi Giovanni Baumann .,
will u please tell me how u added NAME1 field to on the output list Layout on the report . please guide me on this.
Regards.,
S.Sivakumar

'Report Date' field

Friends,
In many transactions like depreciation run etc, there is a field 'Report Date'. In SAP help, it means that it can be a period end date. However, I am unable to enter a valid date in this field many times. Can someone guide me on exactly what does this field signify and what can be the data that can be entered here.
Thanks

Hi,
In report S_ALR_87011990 Asset History sheet for example the report date value is dependant on:
Example: Fiscal Year is equal to Calendar Year
1. You can enter the date for the last day of a period provided that this Period is open. 30/06/2007 provided Period 6 is open. If Period 6 is closed
2. if the Previous Year is already closed then you can only run the report for end of the year 31/12/2006.
3. If you want to run the report for a future year the you must run for end of that year e.g. 31/12/2008
You may have to check in OB52 which posting periods are closed and open.
Hope this helps.
Siva

SAP MM Agewise Stock Standard report in Days

<b>Dear MM Guys
In sap mm Any standard report available for Agewise stock in days. format. pls tell me..
Regards
Anandkumar.</b>

Hi,
There is no such report available in SAP at the most you can use MC46
BUT IT DOES NOT PROVIDE AGEWISE ANALYSIS
So you will have to develop Z report
BR
Diwakar
reward if useful

Stock report for a specific date.

Hi Gurus,
Can any one please tell me if there is any option is SAP by which i can get the stock status for a particular day. I mean if i want to check what was the stock report on last week some day, is there an option in SAP to do that. This report should give the stock of that day and any movements after that day should not be included in that report, for example if 10 quantity of a material was available on 26/03/09 and 5 were either moved or consumed, can i get the status in past for 26/03/09 today as quantity 10 rather than quantity 5 which is available today.
Regards
Anoop

hi,
Try with t.code MB5B -Stock on Posting date. You can get what you want.
Regards,
Prasath

Stock report for a period (based on posting date)

Hi Experts,
We have a requirement as under:
1) We want a report for a period say from 01.04.2011 to 30.09.2011 (closed period for both MM and FI postings). Report is being taken on a later date say 01.12.2011.
2) The report should say the status of stock as of 30.09.2011 only even of being taken in the month of December
3) I tried to take the desired report through MB5B for the period 30.09.2011 to 30.09.2011 (selection date fields) on 20th december, 2011 and noticed that if same report with the same selection criteria is taken at two different times, output data is not the same whereas MM and FI posting periods are already closed.
Can anybody suggest alternative SAP standard report where output will remain the same if report with same selection criteria is taken at different intervals ELSE in case of change we should be able to see the documents posted in between if back dated entries have been posted after opening MM /FI period.
thanks

sure it speaks the same, but it mentions as well the reasons (1) and has much more information (2) and a solution.(3)
1)
user starts transaction MB5B for a very large number of materials or for all materials in a plant
During the runtime of transaction MB5B, goods movements are posted in parallel:
- The results of transaction MB5B are incorrect.
- Each run of transaction MB5B returns different results for the same combination of "material + plant".
Example: Transaction MB5B should process 100 materials with 10,000 MM documents each. The system takes approximately 1 second to read the material master data and it takes approximately 1 hour to read the MM and FI documents. A goods movement for a material to be processed is posted approximately 10 minutes after you start transaction MB5B. The stock for this material before this posting has already been determined. The new MM document is also read, however. The stock read before the posting is used as the basis for calculating the stocks for the start and end date.
Even for an old and closed period, MB5B starts today and calculates backwards any movement to finally get the stock for the time your specified in your selection.
2)
The SAP standard release does not include a solution
so you have to understand that there is no real alternative transaction in SAP
3) and then they provide a large section with a workaround that can be developed by an experienced programmer within 3 to 5 days.
So how shall anyone here be able to tell you an alternative report?
if someone does, then it is an owndeveloped z-report which is not available in your sap system.
if you know that people want lookup period closing stocks at any time in future, then either schedule MB52 at month end and store the list somewhere (and do not allow backposting)
or have an Abaper create a stock report based on the history tables MARDH, MCHBH, MBEWH etc.
And even here you may encounter an issue at some day, if you start archving special stocks or material masters, because then the stock figures from the historic tables are gone and you cannot rebuilt a reliable stock report .

Stock report on key date with customer information

Hi Experts,
Is there an available sap standard report that will show available stock in subcontractors or customers at specific date(posting date)?
transaction MC.9 only show consignment stock without customer information we would like to know which customer inventoried this quantity
Thank you for your inputs

Hello,
Thank you very much for your responses. I tried to check transaction MB51 but the customer is not displayed in the report. I found another report S_P00_07000140 that seems to fit the requirements. customer and posting date were also displayed in the generated report. However the SAP menu of this report is:
SAP Menuu21D2Accountingu21D2Financial Accountingu21D2General Ledgeru21D2Reportingu21D2Tax Reportsu21D2Thailandu21D2Inventory and Raw Material for Special Stock Report
Will there be no implications if this is used instead of MC.9 or MB51? what are the differences of the 3 transactions?
Best regards.

Stock report with grn no & date

hello gurus,
I need standard stock reports available in SAP with GRN no. and date.
points assured*
Anand

Hi
Use MB5B stock on posting date.By using this T code
1.You see stock on a perticular date
2.If you give selection date rangeL ex 01.07.2007 to 16.07.2007 then
   It will display Stock as on 01.07.2007
   Stock as on 16.07.2007
   and all the goods movement between 01.07.2007 to 16.07.2007.
Use MMBE, after executing select Material movements from Environment tab in menu bar.It will also display all the material movements for that material.
Regards
Ramakrishna

Stock Report in Sap ecc6

Dear Team,
I was previously using Russian J3RFLVMOBVED in Sap ecc6. It was working fine for the last two years for stock valuation quantity & Value wise. From Jan 2012 this report is showing Negative Stock in the report. For this i consulted ABAP for the check the values source (from which table these negative values are arising) in table MBEW & BSIM. These values also didn't existed in the Table mentioned above. Can any one advice me for this problem?
Also can any one provide me alternative report in sap ecc-6 for Stock quantities & Values on specified dates along with the sub locations.
Secondly is there any standard report for Material Aging?
M.Yousuf

Hi,
I have checked mb5b its not addressing my issue as its showing valuated stock without location & Batches. I have checked S_POO_07000139, ITS ALSO SHOWING Valuated Stock without Batch Plant & Location wherease MC.1 & other MC Tcodes. They are showing valuated stock without batches material code & Description in a summarized form.
I need this stock report for the stock count on month End in a summarized form.
Please advice any other solution.
M.Yousuf

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

No stock showing in Inventory on date stock report

Hi
I have created a Stock on date query at plant material level using standard cube 0IC_C03
to get stock quantity on posting date i have restricted 0TOTALSTCK
by 0CALDAY variable .
Correct me if any thing wrong to get on date stock.
When i m executing that report for date 20.07.2009 , it shows 0 qty for a given Plant(1001) and a given material(ABC)
where MB5B report in R/3 with same date show sum stock qty.
again i executed the report with 17.07.2009 , on which the material(ABC) was lastly transacted for that given plant(1001)
for this date i m able to match the qty with MB5B.
Then i check sum other stock report which is at 0CALMONTH level wen executed with 07.2009 shows correct qty.
Now my question is y it is showing 0 qty wen the stock is there in it ? is query definition not proper to get stock on date ?
Thanks and regards,
Sonal....

Hi,
No need to restict.
in rows, calday, plant, materials
in column 0TOTALSTCK.
for 2 days data will look like this.
19/07/2009 -- 1001 -- 011235 --- 256 KG
20/07/2009 -- 1001 -- 011235 --- 280 KG
stock as on 19 in MB5B, after recipts and issue is 256 KG.
stock as on 20 th in MB5B, after recipts and issue is 280 KG.
based on issues and recipts, data will be added to total stock.
yes, stock will be last date posting date. as on today we can validate data till yesterday.
one more thing for plant whose values are not matching, did to drill down stock type and stock category and check data.
use RWBE t-code also for validation.
Best Regards.

Agewise stock report data missmatch in SAP BI ?

Similar Messages

Maybe you are looking for