Agewise Stock Report using FIFO out of 0IC_C03
Hello,
I have a requirement where I need to create agewise stock report using FIFO. I have the stock availability from 0ic_c03.
Can any one plese tell me how to achieve the FIFO based agewise stock. I have various age buckets like 0-30 , 30-60, 60-90 etc.
If the total stock is made up of multiple receipts and I also have few issues, how can I get the balance stock based on FIFO using the GR date.
I would appreciate your help.
Regards
Vasun
Hi,
This InfoCube allows you to evaluate stocks from ERP.
A new feature in this InfoCube is the pre-existing stock key figure Valuated Stock Quantity (0VALSTKQTY) and the associated movement key figures Receipt Quantity Valuated Stock (0RECVALSTCK) and Issue Quantity Valuated Stock (0ISSVALSTCK).
This is made possible by including the InfoObject indicator Evaluation Special Stock (0INDSPECSTK) in the InfoSource Material Stocks (as of SAP BW 3.1 Content) (2LIS_03_BX). The InfoSource used up until now, Transfer BW: Stock (2LIS_40_S278), did not recognize this InfoObject.
Note the Remarks on Filling Non-Cumulative InfoCubes.
The following Basis key figures can be restricted in the query definitions to stock categories (0STOCKCAT), such as project stock, and to stock types (0STOCKTYPE), such as quality inspection:
· Quantity of Valuated Stock (0VALSTCKQTY)
· Receipt Quantity Valuated Stock (0RECVALSTCK)
· Issue Quantity Valuated Stock (0ISSVALSTCK)
In this way, for example, you can evaluate the quantity of valuated project stock (Q).
The newly-included Basis key figures are only updated through the InfoSources 2LIS_03_BX and 2LIS_03_BF.
In this way, none of these Basis key figures can be used in queries that are built up on InfoCubes which were inventory-initialized through InfoSource 2LIS_40_S278. Moreover, the queries 0IC_C03_Q0013 to 0IC_C03_Q0016 cannot be used in the combination of InfoSources 2LIS_40_S278 and 2LIS_03_BF.
Note the following procedures when filling the InfoCube 0IC_C03 for the first time with non-cumulative data from ERP:
1. Create non-cumulatives with the program BW: Initialization of Opening Non-Cumulatives in Transfer Structure (RMCBINIT_BW).
2. Initialize the movements/revaluations with the program RMCBNEUB/RMCBNERP.
3. Post in the InfoCube using the update method Creation of Non-Cumulatives from the InfoSource 2LIS_03_BX.
4. Post in the InfoCube using the update method Initialization of the Delta Process from the InfoSources 2LIS_03_BF and 2LIS_03_UM.
Refer to SAP Note 0643687 (Compression of Non-Cumulative InfoCubes) regarding the subsequent steps for compression.
5. Compression of the request from 2LIS_03_BX with update of the marker.
6. Because in this case you are posting movements and revaluations in the InfoCube that occurred before the non-cumulative creation and which lead to this non-cumulative creation, you must execute a compression without updating the marker. For more information, see InfoCubes.
7. Thereafter, you can transfer new movements and revaluations to the BW system as usual (for performance reasons, we recommend that you regularly compress with updates of the marker, see also InfoCube Compression).
Update Logic
When updating the DataSources 2LIS_03_BX, 2LIS_03_UM and 2LIS_03_BX, the System applies the following logic:
Characteristic Value Calculation
In principle, values are updated with Plant, Material, and Stock Category only. Quantities are updated with these characteristics, as well as with Storage Location, Batch Number, and Stock Characteristic (see also SAP Note 589024: Evaluations in BW with the Characteristics Storage Location and Stck Char.).
Key Figure Value Calculation
The source field for quantities is the field CPQUABU, and for values it is the field CPPVLC.
In the update, the InfoSource fields Stock Characteristic and Stock Category control whether "special stock" key figures are updated, such as Quality Stock or Stock in Transit (only relevant for 2LIS_03_BF and 2LIS_03_UM).
The general key figures (for example, Total Stock), however, can also be restricted in queries to Stock Characteristic and Stock Category, and then deliver the same result (key word: account model versus key figure model).
The values for Stock Characteristic and Stock Category are dealt with on the extractor side in the LMCB1F20 include (routine STA_VERAENDERUNG).
The InfoObject 0INDSPECSTK (field KZBWS) also controls whether the sales order stock / project stock is valuated or non-valuated.
The system valuates the transaction key to decide whether the issue movement key figure or receipt movement key figure is updated. For more information, see SAP Note 492828: Determining the transaction key for 2LIS_03_BF + 2LIS_03_UM.
InfoSources
This InfoCube is based on the following InfoSources:
· 2LIS_03_BX
· 2LIS_03_BF
· 2LIS_03_UM
Characteristics
InfoObject
Description
0MATERIAL
Material
0PLANT
Plant
0STOR_LOC
Storage Location
0BATCH
Batch Number
0STOCKTYPE
Stock Type
0STOCKCAT
Stock Categories
0GN_VENDOR
Vendor
Time Characteristics
InfoObject
Description
0CALDAY
Calendar Day
0CALMONTH
Calendar Year/Month
0CALWEEK
Calendar Year/Week
0CALYEAR
Calendar Year
Key Figures
InfoObject
Description
0RECVS_VAL
Value Received - Valuated Stock
0VALSTCKVAL
Value - Valuated Stock
0ISSVS_VAL
Value Issued - Valuated Stock
0ISSBLOSTCK
Issue Quantity - Blocked Stock
0ISSCNSSTCK
Issue Quantity - Consignment Stock
0ISSQMSTCK
Issue Quantity - Inspection Stock
0ISSTRANSST
Issue Quantity - Stock in Transit
0RECBLOSTCK
Receipt Quantity - Blocked Stock
0RECCNSSTCK
Receipt Quantity - Consignment Stock
0RECQMSTCK
Receipt Quantity - Inspection Stock
0RECTRANSST
Receipt Quantity - Stock in Transit
0QMSTOCK
Inspection Stock
0BLOCKEDSTK
Blocked Stock
0CNSSTCKQTY
Quantity - Consignment Stock
0TRANSSTOCK
Stock in Transit
0ISSSCRP
Issue Quantity - Scrap
0ISSVALSCRP
Issue Value - Scrap
0RECTOTSTCK
Receipt Quantity - Total Stock
0ISSTOTSTCK
Issue Quantity - Total Stock
0TOTALSTCK
Quantity - Total Stock
0ISSVALSTCK
Issue Quantity - Valuated Stock
0RECVALSTCK
Receipt Quantity - Valuated Stock
0VALSTCKQTY
Quantity - Valuated Stock
0VENCONCON
Consumption Value - Vendor Consignment Stock
Units
InfoObject
Description
0LOC_CURRCY
Local Currency
0BASE_UOM
Base Un
Regards,
Hareesh
Similar Messages
-
Project Stock report using QBEW and QBEWH tables
Dear All,
First of all Happy New Year to all of you.
Here is my question: I want to build a ABAP report for stock situation for project stock. The report demands the stock by closing month. Suppose I run the report for month 11/2010, it should show the closing stock at the end of the month 11/2010.
Now I am using the values from table QBEW for this purpose.But QBEW table shows only current entries. If a material stock is changed or value is changed, it goes into history table QBEWH.
Now problem is that if I try to make sum of QBEW and QBEWH, the stock value is excessive. Now I am not sure which entries I should consider from QBEWH table for this purpose.
Has anybody worked on similar requirement?
Thanks in advance!
Regards,
Mahendra DigheHi,
Please try the report S_P00_07000140 - Inventory and Raw material for special stock report.
Thanks.
abdul -
Agewise stock report data missmatch in SAP BI ?
Dear Experts,
While in R/3 for material No 49214 total stock quantity is 29,0000
But after executing the query Agewise stock for the same material No 49214 total stcok quantity is showing 27,0000 .
How to match both the total stcok qauntity.?
Regards,
AsitHi,
But after executing the query Agewise stock for the same material No 49214 total stcok quantity is showing 27,0000 .
Do you mean BEx Report? If yes, the you need to first look in the Infoprovider level --> PSA Level and in R/3 side RSA3.
Check if you have any Conditions or Restrictions in the Query.
Regards,
Suman -
Stock report using mbew and mbewh
Hi to all.
i want to prepare o report for month end stock.
i am preparing this report using tables mbew and mbewh..
as per my knowledge goes the current stock is in the table mbew and history stock is in the table mbewh.
i am picking up the current data from the mbew and history data from mbewh..
the report is working fine till for january to august..
but i dont know what wrong happen when i run it for the last month of previous year i.e 01/12/2005.
it is showing some data difference for this period and also due to this some difference for earlier periods..
please suggest me what could be the reason..
because i have worked a lot on it and it is also working fine for this year...
also tell me what could be the problem..
i will surely reward back with points..HI
I guess the problem might be lying with the way you
are handling the date or period.
Can you post your code???
Kind Regards
Eswar -
Stock report using actual price
HI ALL
We want to have a report which is similar to J3RFLVMOBVED ( Stock on Start、Goods receipt、 Goods issue、Stock on End )
But the value is using standard price.
We already activated material ledger which will calculate actual price and update to periodic unit price field.
Is there any standard report similar to J3RFLVMOBVED but using actual price ?
Thanks a lot
DanielleHI
I guess the problem might be lying with the way you
are handling the date or period.
Can you post your code???
Kind Regards
Eswar -
Hello to ALL
I want stock report FIFO WISE
my Item valuation method is FIFO & Purchase & sale by batch wise,i want report to show that which quantity is remaining & what is the cost for that item
Suppose i purchase I01 qty 2 Price 10 & after i purchase I01 Qty 2 price 15
ie i have stock of I01 is 4 but i want it show bifurcated with coming price ie
ItemCode Qty Price STCK VALUE
I01 2 10 20
2 15 30
If i sale I01 1Qty then i have total stock qty is 3 then report must show that
ItemCode Qty Price STCK VALUE
I01 1 10 10
2 15 30hi Jaykumar,
use Inventory Audit Report instead. follow this path
Inventory -->> Inventory Report -->> Inventory Audit Report
regards,
Fidel -
SAP MM Agewise Stock Standard report in Days
<b>Dear MM Guys
In sap mm Any standard report available for Agewise stock in days. format. pls tell me..
Regards
Anandkumar.</b>Hi,
There is no such report available in SAP at the most you can use MC46
BUT IT DOES NOT PROVIDE AGEWISE ANALYSIS
So you will have to develop Z report
BR
Diwakar
reward if useful -
How to send mail with out attachment in a report using oops concept
Hi Abap Experts,
My requirement is i have to send a mail with out attaching any documents this is a report using oops conceopt how can i acheive it .Hi Saeed,
Please search SDN before posting. There are so may threads for the same.
Check out the standard reports--
bcs_example_1, bcs_example_2, .. bcs_example_7
Howard -
How to print out multilingual reports from the main report using Xliff temp
Hi all,
How to print out multilingual reports from the main report using Xliff temp?
When I want main report call subtemplate and finish xliff tranlation
<?for-each@section:INVOICE?><?end for-each?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
Prints out fine with Finnish translation
But if I want in main program to check what language is used e.g.
if trx_number = 142 call Finnish translation and if trx_number =144,
call English translation.
<?for-each@section:INVOICE?><?end for-each?>
<?if:TRX_NUMBER=’142’?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
<?end if?>
<?if: TRX_NUMBER=’144’?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
<?end if?>
Prints out always in English and never the Finnish translation.
Program goes fine to if branch but does not print out Finnish
Does anybody know what could be wrong?
BR
KariThanks Amit,
I have two layout, main-layout and sub-layout
Main layout call subtemplate
I have registered layout and xliff-file
Main template
Localized Templates
File Name Language Territory
XXNS_INVOICE_MAIN.rtf English
SUB template
Localized Templates
File Name Language Territory
XXNS_INVOICE_SUB.rtf English
Translatable Template
File Name Language Territory
XXNS_INVOICE_SUB.rtf English United States
Available Translations
Language Territory Progress
English Finland Complete
If main report call subtemplate and finish xliff tranlation
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
Prints out fine with Finnish translation
But if I want in main program to check what language is used e.g.
if....
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
.....end if;
if....
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
.....end if;
Prints out always in English and never the Finnish translation.
Program goes fine to if branch but does not print out Finnish
Do you it's set up problem or program problem
BR
Kari -
Use same report to print out different data sources on the fly.
Post Author: Lady101
CA Forum: Data Connectivity and SQL
We have 10 reports use diferent datasource( use views with different joint tables), but their print out format are identical. Is there a way to just use single report to run those 10 reports dynamically(the report can point to the right data source on the fly)? So that we can just change single report format when report format needs to be changed. Right now we have to change 10 reports format one by one.Another option would be to make a single pass in the Source Monitor and save a bunch of subclips. Here's a thread discussing keyboard workflows: Re: Question on making many Subclips in a fast way
If you name highlights with one base name and lowlights with another, it would be easy to drop each batch into its own sequence. -
Browser Time out in Reports (using WEB.SHOW_DOCUMENT to call reports)
When running a big report which takes a long time to run, it finishes on the report server but in the browser the screen is stuck at the parameter form, you don't see the report output. It's as if the browser has timedout. Is there a solution to this?
I am running reports using WEB.SHOW_DOCUMENT only - through a URL. This seems to be a huge drawback of using this method.Is the browser launching?
If it is have you tried a show source on the browser window?
Sometimes if you open an XML file in a browser you get a blank page but the XML is there. Something to do with the XML format I think. I'm no expert on XML just a behaviour I have observed. -
Material Stock Report for tcode MB5B
Hello Expert
I have a SAP report for stock posting date with T-Code as MB5B and
the report name is RM07MLBD.
When I enter Material no, plant code , Movement type (101) and selection
dates for a month, The report is displaying but not break by Movement type instead it is showing all the movement type....?
Can anyone have idea about this
REPORT RM07MLBD NO STANDARD PAGE HEADING MESSAGE-ID M7 LINE-SIZE 95.
REPORT RM07MLBD (Transaktionscode MB5B) *
correction June 2004 MM "n747306
wrong the assignment of the MM and FI documents for data "n747306
constellation : n MM doc items --> 1 FI doc item "n747306
ABAP-Preprocessor removed "n599218 A
- this version is for release 4.6C and higher "n599218 A
- process database table OBEW always "n599218 A
- IS-OIL specific functions : "n599218 A
- define IS-OIL workings fields "n599218 A
- transport and process these fields only when "n599218 A
structure MSEG comprise these fields "n599218 A
Improvements : Dec. 2003 MM "n599218
- print the page numbers "n599218
"n599218
- send warnings and error messages only when report is "n599218
launched / advoid warnings when user changes entries on "n599218
the selection screen "n599218
- send warning M7 689 when user does not restrict the "n599218
database in dialog or print mode "n599218
- send warning M7 393 when user deletes the initial "n599218
display variant "n599218
"n599218
- allow to process the fields MAT_KDAUF, MAT_KDPOS, and "n599218
MAT_PSPNR from release 4.5B and higher "n599218
"n599218
- show the current activity and the progress "n599218
"n599218
- error message 'programmfehler' improved "n599218
"n599218
- new categories for scope of list "n599218
"n599218
- use function module for database commit for the update "n599218
of the parameters in table ESDUS. This allows to record "n599218
this transaction for a batch input session using "n599218
transaction SHDB "n599218
"n599218
- reset the entries for plant when valuation level is "n599218
is company code and mode is valuated stock "n599218
"n599218
- enable this report to run in the webreporting mode "n599218
Dec. 2002 MM "n571473
the definition of the selection screen moved from include "n571473
RM07MLBP into this report "n571473
Sept 2002 MM "n555246
log function tax auditor "n555246
note 547170 : August 2002 MM "n547170
- representation of tied empties improved "n547170
active this function automatically in retail systems "n547170
- FORM routines without preprocessor commands and without "n547170
text elements moved to the new include reports "n547170
RM07MLBD_FORM_01and RM07MLBD_FORM_02 "n547170
- the function module FI_CHECK_DATE of note 486477 will "n547170
be processed when it exists "n547170
- function and documentation of parameter XONUL improved "n547170
- display MM documents with MIGO or MB03 depending from "n547170
the release "n547170
- get and save the parameters per user in dialog mode "n547170
only in release >= 4.6 "n547170
the following items were improved with note 497992 "n497992
- wrong results when remaining BSIM entries contain "n497992
an other quantity unit as material master MEINS "n497992
- improve check FI summarization "n497992
- the messages M7 390, M7 391, and M7 392 "n497992
- definition of field g_f_repid for all releases "n497992
- incomplete key for access of internal table IT134M "n497992
causes wrong plant selection "n497992
- the function "no reversal movement" did not surpress "n497992
the original movements; fields "SJAHR" was moved from "n497992
from report RM07MLBD_CUST_FIELDS to RM07MLBD "n497992
- process valuated subcontractor stock from database "n497992
table OBEW if it exists "n497992
- if FI summarization is active process warning M7 390 "n497992
for stock type = valuated stock "n497992
- the user wants to restrict the movement type : process "n497992
warning M7 391 "n497992
- the user wants to surpress the reversal movements : "n497992
process warning M7 392 "n497992
- consider special gain/loss-handling of IS-OIL "n497992
- automatic insert of field WAERS currency key into the "n497992
field catalogue : "n497992
- at least one ref. field is active -> WAERS active "n497992
- all reference fields are hidden -> WAERS hidden "n497992
- the length of sum fields for values was increased "n497992
- customizing for the selection of remaining BSIM entries "n497992
- customizing for the processing of tied empties "n497992
separate time depending authorization for tax auditor "n486477
additional fields are displayed in wrong format "n480130
report RM07MLBD and its includes improved Nov 2001 "n451923
- merging FI doc number into table G_T_MSEG_LEAN improved "n451923
- handling of the short texts improved "n451923
- some types and data definitions -> include RM07MLDD "n451923
error for split valuation and valuated special stock "n450764
process 'goods receipt/issue slip' as hidden field "n450596
error at start date : material without stock has value "n443935
wrong results for docs with customer consignment "W" "n435403
error during data selection for plants "n433765
report RM07MLBD and its includes improved May 10th, 2001 "n400992
!!! IMPORTANT : DO NOT CHANGE OR DELETE THE COMMENT LINES !!! *
- consider the material number during looking for FI documents
- field "g_cust_color" in include report "RM07MLBD_CUST_FIELDS"
allows the customer to activate or inactivate the colors in the
lines with the documents.
- error during calcuation of start stock for special stock "M"
- valuted stocks required : no documents found ? continue and
process empty document table
- the length of sum fields for quantities has been increased
to advoid decimal overflow
- table ORGAN is replaced by G_T_ORGAN
- it is filled by the following ways :
- at process time at selection screen if the
user wants the selection via cc or plant
- otherwise after the database selection of the stock
tables
- it contains less data fields
- it contains all entries twice, for binary search
with plant or valuation area
- selection of databases MKPF and MSEG in one SELECT
command with an inner JOIN
- authority checks after the database selections
- result of database selection from the both database tables
MSEG and MKPF in working table G_F_MSEG_LEAN instead of
the tables IMSEG and IMKPF
- the number of processed data fields was reduced
- the user has the possibility to increase the number of
the processed fields deleting the '*' in the types-command
in include report RM07MLBD_CUST_FIELDS
- the creation of the field catalog for the ALV considers
only the fields of structure G_S_MSEG_LEAN
- the new table G_T_BELEG contains the results for the ALV.
the number of fields of table G_T_BELEG corresponds with
the number of fields of table G_T_MSEG_LEAN.
- the functions "define breakdown" and "choose" are inactivated
in the menue, because they are are not carried out correctly
in all blocks of the list
Anzeige der Materialbestände in einem Zeitintervall *
Der Report gliedert sich im wesentlichen in folgende Verarbeitungs- *
blöcke: *
1) Definition des Einstiegsbildes und Vorbelegung einzelner *
Selektionsfelder, sowie Prüfung der eingegebenen Selektions- *
parameter und Berechtigungsprüfung *
2) Lesen der aktuellen Bestandswerte *
3) Lesen und Verarbeiten der Materialbelege *
4) Berechnung der Bestandswerte zu den vorgegebenen Datümern *
5) Ausgabe der Bestände und Materialbelege *
*eject
*# APP_CALL_DECLARE TEST
this definitions depend on the release
TYPE-POOLS: IMREP, " Typen Bestandsführungsreporting
SLIS. " Typen Listviewer
for the selection of the reversal movements only in release >=45B
DATA: BEGIN OF STORNO OCCURS 0,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
ZEILE LIKE MSEG-ZEILE,
SMBLN LIKE MSEG-SMBLN,
SJAHR LIKE MSEG-SJAHR,
SMBLP LIKE MSEG-SMBLP,
END OF STORNO.
include: rm07mldd, " reportspezifische Datendefinitionen
rm07grid. " Gitternetz, Formatierung, Farbgebung
INCLUDE RM07APP1. "ABAP-PREPROCESSOR "TEST
"n571473
define the selection screen here "n571473
"n571473
SELECTION-SCREEN BEGIN OF BLOCK Database-selection
WITH FRAME TITLE TEXT-001.
Text-001: Datenbankabgrenzungen
SELECT-OPTIONS: MATNR FOR MARD-MATNR MEMORY ID MAT
MATCHCODE OBJECT MAT1,
BUKRS FOR T001-BUKRS MEMORY ID BUK,
WERKS FOR T001W-WERKS MEMORY ID WRK,
LGORT FOR T001L-LGORT,
CHARG FOR MCHB-CHARG,
BWTAR FOR MBEW-BWTAR,
BWART FOR MSEG-BWART.
PARAMETERS SOBKZ LIKE MSEG-SOBKZ.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS: DATUM FOR MKPF-BUDAT NO-EXTENSION.
Datumsintervall für Selektion
SELECTION-SCREEN END OF BLOCK Database-selection.
SELECTION-SCREEN BEGIN OF BLOCK BESTANDSART
WITH FRAME TITLE TEXT-002.
Text-002: Bestandsart
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS LGBST LIKE AM07M-LGBST RADIOBUTTON GROUP BART DEFAULT 'X'.
SELECTION-SCREEN COMMENT 4(50) TEXT-010 FOR FIELD LGBST.
Text-010: Lagerort-/Chargenbestand
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS BWBST LIKE AM07M-BWBST RADIOBUTTON GROUP BART.
SELECTION-SCREEN COMMENT 4(50) TEXT-011 FOR FIELD BWBST.
Text-011: bewerteter Bestand
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS SBBST LIKE AM07M-SBBST RADIOBUTTON GROUP BART.
SELECTION-SCREEN COMMENT 4(50) TEXT-012 FOR FIELD SBBST.
Text-012: Sonderbestand
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BESTANDSART.
improved definition of parameters for scope of list "n599218
SELECTION-SCREEN BEGIN OF BLOCK listumfang
with frame title text-003. "Listumfang
the following 3 parameters became obsolete do not use "n599218
anymor. They are still here to inform the user about "n599218
that he is using old variants or SUBMIT commands "n599218
PARAMETERS : "n599218
XONUL LIKE AM07M-XONUL no-display, "n599218
XVBST LIKE AM07M-XVBST no-display, "n599218
XNVBST LIKE AM07M-XNVBS no-display. "n599218
7 new categories for the scope of list "n599218
"n599218
cat. I docs I stock on I I stock on I Parameter "n599218
I I start date I I end date I "n599218
---+--+--------++------+-------- "n599218
1 I yes I = zero I = I = zero I pa_wdzer "n599218
2 I yes I = zero I <> I <> zero I pa_wdzew "n599218
3 I yes I <> zero I <> I = zero I pa_wdwiz "n599218
4 I yes I <> zero I <> I <> zero I pa_wdwuw "n599218
5 I yes I <> zero I = I <> zero I pa_wdwew "n599218
I I I I I "n599218
6 I no I = zero I = I = zero I pa_ndzer "n599218
7 I no I <> zero I = I <> zero I pa_ndsto "n599218
"n599218
definition of the pushbutton : show or hide the following "n599218
parameters for the scope of list "n599218
SELECTION-SCREEN PUSHBUTTON /1(20) PB_LIU "n599218
USER-COMMAND LIU. "n599218
"n599218
text line : materials with movements "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN COMMENT 1(55) TEXT-072 "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / start = zero = end = zero "n599218
1 I yes I = zero I = I = zero I pa_wdzer "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_wdzer LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
text-083 : no opening stock ; no closing stock "n599218
SELECTION-SCREEN COMMENT 5(70) text-083 "n599218
FOR FIELD pa_wdzer "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / start = zero = end <> zero "n599218
2 I yes I = zero I <> I <> zero I pa_wdzew "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_wdzew LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
text-084 : no opening stock ; with closing stock "n599218
SELECTION-SCREEN COMMENT 5(70) text-084 "n599218
FOR FIELD pa_wdzew "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / start stock <> 0 / end stock = 0 "n599218
3 I yes I <> zero I <> I = zero I pa_wdwiz "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_wdwiz LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
text-085 : with opening stock ; no closing stock "n599218
SELECTION-SCREEN COMMENT 5(70) text-085 "n599218
FOR FIELD pa_wdwiz "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / with start and end stocks / different "n599218
4 I yes I <> zero I <> I <> zero I pa_wdwuw "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_wdwuw LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
with opening stock ; with closing stock ; changed "n599218
SELECTION-SCREEN COMMENT 5(70) text-086 "n599218
FOR FIELD pa_wdwuw "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
with movements / with start and end stock / equal "n599218
5 I yes I <> zero I = I <> zero I pa_wdwew "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_wdwew LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
with opening stock ; with closing stock ; non-changed "n599218
SELECTION-SCREEN COMMENT 5(70) text-087 "n599218
FOR FIELD pa_wdwew "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
text line : materials without movements "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN COMMENT 1(55) TEXT-073 "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
materials without movements / stocks = zero "n599218
6 I no I = zero I = I = zero I pa_ndzer "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_ndzer LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
text-083 : no opening stock ; no closing stock "n599218
SELECTION-SCREEN COMMENT 5(70) text-083 "n599218
FOR FIELD pa_ndzer "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
materials without movements / with start or end stock "n599218
7 I no I <> zero I = I <> zero I pa_ndsto "n599218
SELECTION-SCREEN BEGIN OF LINE. "n599218
SELECTION-SCREEN POSITION 2. "n599218
PARAMETERS : pa_ndsto LIKE AM07M-MB5B_XONUL "n599218
modif id liu. "n599218
with opening stock ; with closing stock ; non-changed "n599218
SELECTION-SCREEN COMMENT 5(70) text-087 "n599218
FOR FIELD pa_ndsto "n599218
modif id liu. "n599218
SELECTION-SCREEN END OF LINE. "n599218
"n599218
SELECTION-SCREEN END OF BLOCK listumfang.
SELECTION-SCREEN BEGIN OF BLOCK EINSTELLUNGEN
WITH FRAME TITLE TEXT-068. "Settings
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
PARAMETERS XSUM LIKE AM07M-XSUM.
SELECTION-SCREEN COMMENT 4(50) TEXT-019 FOR FIELD XSUM.
Text-019: nur Summen
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
PARAMETERS XCHAR LIKE AM07M-XCHRG.
SELECTION-SCREEN COMMENT 4(50) TEXT-015 FOR FIELD XCHAR.
Text-015: nur chargenpflichtige Materialien
Das Kennzeichen 'xchar' bestimmt die Art der Listausgabe entweder
auf Material- oder Chargenebene.
SELECTION-SCREEN END OF LINE.
the function "No reversal movements" is only "n571473
available from relaese 4.5B and higher "n571473
( TEXT-026 : No reversal movements ) "n571473
SELECTION-SCREEN BEGIN OF LINE. "n571473
SELECTION-SCREEN POSITION 1. "n571473
PARAMETERS NOSTO LIKE AM07M-NOSTO. "n571473
SELECTION-SCREEN COMMENT 4(50) TEXT-026 "n571473
FOR FIELD NOSTO. "n571473
SELECTION-SCREEN END OF LINE. "n571473
SELECTION-SCREEN END OF BLOCK EINSTELLUNGEN.
SELECTION-SCREEN BEGIN OF BLOCK LISTE WITH FRAME TITLE TEXT-040.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK LISTE.
*eject
new data definitions
working fields for reading structures from DDIC "n599218 A
and check whether IS-OIL is active "n599218 A
types : stab_x031l type standard table of x031l "n599218 A
with default key. "n599218 A
"n599218 A
data : g_s_x031l type x031l, "n599218 A
g_t_x031l type stab_x031l. "n599218 A
"n599218 A
data : g_f_dcobjdef-name like dcobjdef-name, "n599218 A
g_flag_is_oil_active(01) type c, "n599218 A
g_cnt_is_oil type i. "n599218 A
contains the a structure with the max. number of fields of
the database table MSEG, but those lines are comment lines
with a '*'. The customer can achtivate those lines.
The activated fields will be selected from the database table
and are hidden in the list. With the settings in the display
variant the can be shown.
INCLUDE RM07MLBD_CUST_FIELDS.
common types structure for working tables
a) g_t_mseg_lean results form database selection
b) g_t_beleg data table for ALV
TYPES : BEGIN OF STYPE_MSEG_LEAN,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
BLART LIKE MKPF-BLART,
BUDAT LIKE MKPF-BUDAT,
CPUDT LIKE MKPF-CPUDT,
CPUTM LIKE MKPF-CPUTM,
USNAM LIKE MKPF-USNAM,
process 'goods receipt/issue slip' as hidden field "n450596
XABLN LIKE MKPF-XABLN, "n450596
LBBSA LIKE T156M-LBBSA,
BWAGR LIKE T156S-BWAGR,
BUKRS LIKE T001-BUKRS,
BELNR LIKE BKPF-BELNR,
GJAHR LIKE BKPF-GJAHR,
WAERS LIKE MSEG-WAERS,
ZEILE LIKE MSEG-ZEILE,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
WERKS LIKE MSEG-WERKS,
LGORT LIKE MSEG-LGORT,
CHARG LIKE MSEG-CHARG,
BWTAR LIKE MSEG-BWTAR,
KZVBR LIKE MSEG-KZVBR,
KZBEW LIKE MSEG-KZBEW,
SOBKZ LIKE MSEG-SOBKZ,
KZZUG LIKE MSEG-KZZUG,
BUSTM LIKE MSEG-BUSTM,
BUSTW LIKE MSEG-BUSTW,
MENGU LIKE MSEG-MENGU,
WERTU LIKE MSEG-WERTU,
SHKZG LIKE MSEG-SHKZG,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
DMBTR LIKE MSEG-DMBTR,
DMBUM LIKE MSEG-DMBUM,
XAUTO LIKE MSEG-XAUTO,
KZBWS LIKE MSEG-KZBWS,
special flag for retail "n497992
retail(01) type c, "n497992
define the fields for the IO-OIL specific functions "n599218 A
mseg-oiglcalc CHAR 1 "n599218 A
mseg-oiglsku QUAN 13 "n599218 A
oiglcalc(01) type c, "n599218 A
oiglsku(07) type p decimals 3, "n599218 A
insmk like mseg-insmk, "n599218 A
the following fields are used for the selection of
the reversal movements
SMBLN LIKE MSEG-SMBLN, " No. doc
SJAHR LIKE MSEG-SJAHR, " Year "n497992
SMBLP LIKE MSEG-SMBLP. " Item in doc
additional fields : the user has the possibility to activate
these fields in the following include report
INCLUDE TYPE STYPE_MB5B_ADD.
TYPES : END OF STYPE_MSEG_LEAN.
TYPES: STAB_MSEG_LEAN TYPE STANDARD TABLE OF STYPE_MSEG_LEAN
WITH KEY MBLNR MJAHR.
data tables with the results for the ALV
TYPES : BEGIN OF STYPE_BELEGE.
INCLUDE TYPE STYPE_MSEG_LEAN.
TYPES : FARBE TYPE SLIS_T_SPECIALCOL_ALV.
TYPES : END OF STYPE_BELEGE.
TYPES : STAB_BELEGE TYPE STANDARD TABLE OF STYPE_BELEGE
WITH KEY BUDAT MBLNR ZEILE.
DATA : G_T_BELEGE TYPE STAB_BELEGE WITH HEADER LINE,
G_T_BELEGE1 TYPE STAB_BELEGE WITH HEADER LINE.
global working areas data from MSEG and MKPF
FIELD-SYMBOLS : TYPE STYPE_MSEG_LEAN.
DATA : G_S_MSEG_LEAN TYPE STYPE_MSEG_LEAN,
G_S_MSEG_UPDATE TYPE STYPE_MSEG_LEAN, "n443935
G_T_MSEG_LEAN TYPE STAB_MSEG_LEAN.
working table for the control break "n451923
types : begin of stype_mseg_work. "n451923
include type stype_mseg_lean. "n451923
types : tabix like sy-tabix, "n451923
end of stype_mseg_work, "n451923
"n451923
stab_mseg_work type standard table of "n451923
stype_mseg_work "n451923
with default key. "n451923
"n451923
data : g_t_mseg_work type stab_mseg_work, "n443935
g_s_mseg_work type stype_mseg_work. "n443935
working table for the requested field name from MSEG and MKPF
TYPES: BEGIN OF STYPE_FIELDS,
FIELDNAME TYPE NAME_FELD,
END OF STYPE_FIELDS.
TYPES: STAB_FIELDS TYPE STANDARD TABLE OF STYPE_FIELDS
WITH KEY FIELDNAME.
DATA: G_T_MSEG_FIELDS TYPE STAB_FIELDS,
G_S_MSEG_FIELDS TYPE STYPE_FIELDS.
working table for the requested numeric fields of MSEG
types : begin of stype_color_fields,
FIELDNAME TYPE NAME_FELD,
type(01) type c,
end of stype_color_fields,
stab_color_fields type standard table of
stype_color_fields
with default key.
data: g_t_color_fields type stab_color_fields
with header line.
DATA: BEGIN OF IMSWEG OCCURS 1000,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
ZEILE LIKE MSEG-ZEILE,
MATNR LIKE MSEG-MATNR,
CHARG LIKE MSEG-CHARG,
BWTAR LIKE MSEG-BWTAR,
WERKS LIKE MSEG-WERKS,
LGORT LIKE MSEG-LGORT,
SOBKZ LIKE MSEG-SOBKZ,
BWART LIKE MSEG-BWART,
SHKZG LIKE MSEG-SHKZG,
XAUTO LIKE MSEG-XAUTO,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
DMBTR LIKE MSEG-DMBTR,
DMBUM LIKE MSEG-DMBUM,
BUSTM LIKE MSEG-BUSTM,
BUSTW LIKE MSEG-BUSTW, "147374
define the fields for the IO-OIL specific functions "n599218 A
mseg-oiglcalc CHAR 1 "n599218 A
mseg-oiglsku QUAN 13 "n599218 A
oiglcalc(01) type c, "n599218 A
oiglsku(07) type p decimals 3, "n599218 A
insmk like mseg-insmk, "n599218 A
END OF IMSWEG.
User settings for the checkboxes "n547170
DATA: oref_settings TYPE REF TO cl_mmim_userdefaults. "n547170
*eject
HAUPTPROGRAMM *********************************
F4-Hilfe für Reportvariante -
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
"n599218
INITIALIZATION "n599218
"n599218
"n599218
pay attentions : this process time will not be processed "n599218
in the webreporting mode "n599218
INITIALIZATION.
PERFORM APP_PROCESS USING 'ME'. "TEST
PERFORM initialisierung.
get the parameters from the last run "n547170
perform esdus_get_parameters. "n547170
set flag when INITILIZATION is processed
move 'X' to g_flag_initialization.
"n599218
AT SELECTION-SCREEN "n599218
"n599218
Prüfung der eingegebenen Selektionsparameter, -
Berechtigungsprüfung -
AT SELECTION-SCREEN.
the following 3 parameters XONUL, XVBST, and XNVBST "n599218
became obsolete; send error when they should be filled. "n599218
This could be possible if the user works with old "n599218
selection variants or this report is launched by a "n599218
SUBMIT command "n599218
if XONUL is initial and "n599218
XVBST is initial and "n599218
XNVBST is initial. "n599218
ok, the old parameters are empty "n599218
else. "n599218
text-088 : note 599218 : obsolete parameter used "n599218
MESSAGE E895 with text-088. "n599218
endif.
did the user hit the pushbutton "Category" ? "n599218
case SSCRFIELDS-UCOMM. "n599218
when 'LIU '. "n599218
yes, the pushbutton "Category" was hit "n599218
IF g_flag_status_liu = C_HIDE. "n599218
show the 7 parameters on the selection srceen "n599218
MOVE C_SHOW TO g_flag_status_liu. "n599218
ELSE. "n599218
hide the 7 paramaters "n599218
MOVE C_HIDE TO g_flag_status_liu. "n599218
ENDIF. "n599218
ENDcase. "n599218
"n599218
go on only if the user wants to launch this report "n599218
check : sy-ucomm = 'ONLI' or "n599218
sy-ucomm = 'PRIN' or "n599218
sy-ucomm = 'SJOB'. "n599218
PERFORM eingaben_pruefen.
check whether FI summarization is active and other "n547170
restrictions could deliver wrong results "n547170
perform f0800_check_restrictions. "n547170
- the user wants to surpress the reversal movements : "n497992
process warning M7 392 "n497992
IF NOT NOSTO IS INITIAL. "n497992
emerge warning ? "n497992
CALL FUNCTION 'ME_CHECK_T160M' "n497992
EXPORTING "n497992
I_ARBGB = 'M7' "n497992
I_MSGNR = '392' "n497992
EXCEPTIONSPlease read the KBA document 2012912 - Changeablility of the field "material group" in purchasing documents
It clearly says that material group can't be changed in case you will use material master in purchase order.
So, it is clear that you can't use different material group for material master in purchase order.
For stock report, system will only show you the material group which is assigned to the material master (MARA-MATKL). System will not look into the purchase order section (like EKPO). -
Stock report for cross-company sales
Dear all,
We are using for our Saudi Arabia company the cross-company sales process with sourcing unit in another country.
There is a Legal requirement in Saudi to provide a Stock report (with "stock in", "stock out" quantities and values).
But with the cross-company sales process the stock movements are not visible in Saudi.
Any advice ? Is there a report in SAP for this legal reqirement in Saudi Arabia ?
Best regardsHi,
Try to use t-code MB51, will give you a list with the relevant movement types!
Good luck
Tao -
No stock showing in Inventory on date stock report
Hi
I have created a Stock on date query at plant material level using standard cube 0IC_C03
to get stock quantity on posting date i have restricted 0TOTALSTCK
by 0CALDAY variable .
Correct me if any thing wrong to get on date stock.
When i m executing that report for date 20.07.2009 , it shows 0 qty for a given Plant(1001) and a given material(ABC)
where MB5B report in R/3 with same date show sum stock qty.
again i executed the report with 17.07.2009 , on which the material(ABC) was lastly transacted for that given plant(1001)
for this date i m able to match the qty with MB5B.
Then i check sum other stock report which is at 0CALMONTH level wen executed with 07.2009 shows correct qty.
Now my question is y it is showing 0 qty wen the stock is there in it ? is query definition not proper to get stock on date ?
Thanks and regards,
Sonal....Hi,
No need to restict.
in rows, calday, plant, materials
in column 0TOTALSTCK.
for 2 days data will look like this.
19/07/2009 -- 1001 -- 011235 --- 256 KG
20/07/2009 -- 1001 -- 011235 --- 280 KG
stock as on 19 in MB5B, after recipts and issue is 256 KG.
stock as on 20 th in MB5B, after recipts and issue is 280 KG.
based on issues and recipts, data will be added to total stock.
yes, stock will be last date posting date. as on today we can validate data till yesterday.
one more thing for plant whose values are not matching, did to drill down stock type and stock category and check data.
use RWBE t-code also for validation.
Best Regards. -
Stock Report as on any date.
i am developing a stock report as on any date where i have to get the closing stock of unrestricted blocked and transit stock as on any date.
i have taken a table mkpf and mseg to get the quantity and date.
i am not getting what all movement type i should use to get the closing stock for unrestricted blocked and transit and what method i shoud use?
please help me out.Jairaj Kumar ,
Your Report is Little bit complex and time consuming as well.We did a Report same as like you but not Special Stock (means for all of Stock).
For Closing Balance Which will be Opening Balance of next perio/ next day , can be calculated based on DEBIT / Credit inidcator available in the table you are using. This will used of calculate Stock balance. along with movement type for date range.
Hope this will give some info about for ur requirement. Note refer to Tcode MB5L for reference.
Maybe you are looking for
-
Error while saving web template in WAD? Error in opening RFC Connection?
Hi All. In BI 7.0, While trying to save an web template using BEx WAD resulting an error as mentioned below: " Java communication error : Error when opening an RFC connection " Who provides this RFC connection? - By Basis guy or BI Guy or EP guy or h
-
Udf to pass constant corrsponding to 2 file names from different location
if i have one source file, i m able to pass the file name directly to the target through the udf below: DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION
-
How to disable checking for updates for Shockwave plug-in?
SOS: how can I disable checking for updates (and reporting that there is one) for a Shockwave object on a web page? I have a client with an older Shockwave version, and it's a royal pain for each user to be told there's a newer veriosn and do you wan
-
IPhone 4S doesn't work with car stereo
For about 2 years I've been using my iPhone 3GS connected to the USB input of my JVC car stereo. I just upgraded to the 4S and the stereo doesn't recognize the phone at all. Is this a bug of some kind? Thanks! Randy
-
Tabs disappear and open a new window when editing files in Wordpress
When editing files in Wordpress built-in code editor, if I highlight and try to copy/paste to another file or even within the same file the tab I am on will often abruptly close and then reopen itself in a whole new window. This is extremely disrupti