AGFA ppd driver worked but now reports the printer is busy?
AGFA ppd driver worked but now reports the printer is busy? The network location is definitely available by looking at the shared folders. I can print through the network using the other Mac Book Pro that has the same OS and Driver. This happened after the printers were cleared off and I had to reinstall them individually. The driver was placed in th users profile printers folder and then applied to the IPP priter during setup a before. -Any help is appreciated
You're profile indicates your Mac has v10.5.1 installed.
If that is correct, you need to update to v10.5.8.
Click Software Update from your Apple menu drop down menu or open System Preferences > Software Update.
After the update is installed, restart your Mac.
Turn off the printer then turn it back on then try printing via USB.
If that didn't help, try here > Mac OS X 10.5: Included printer drivers
Similar Messages
-
my ipod says it is updated to most current 6.1.6, i use the rdio app and it worked but now with the update it needs 7.0 but i do not get option to update to this what do i do?
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.1.x
iPhone 4S iOS 8.x.x
iPhone 5 iOS 8.x.x
iPhone 5c iOS 8.x.x
iPhone 5s iOS 8.x.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 8.x.x
iPad 1 iOS 5.1.1
iPad 2 iOS 8.x.x
iPad 3 iOS 8.x.x
iPad 4 iOS 8.x.x
iPad Mini & Mini Retina iOS 8.x.x
iPad Air iOS 8.x.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?
Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files. -
Since the latest apple update, voice navigation has gone away. Tried the Airplane mode fix, which worked, but now my bluetooth won't work in my vehicle. What's up?
Well Bababooey if you're comparing yourself to a Apple Genius Bar then you should already know my answer, your snarky remark get a snarky reply. Why would I go to a salesperson to fix my computer problem when I can go directly go to the source itself. I used to sell Apple computers over 8 years ago and was apple certified before the Genius bar existed. If I am to go about fixing an issue I can't fix on my own I will go to the source itself meaning Apple's programmers and developers - being UI UX Developer myself I know they should have QA'd all platforms and troubleshooted any arising issues.
This was also the first time in the 20 years I've been using a Mac that I even attempted to go on this forum which i thought would put me in connection with a certified Apple representative. This turned out to be a complete waste of time just being a public forum with no Apple employee involved. I was hoping to find a quick fix but in turn I was only frustrated with stupid responses such as yours that were in no way an answer to my original question.
BTW I fixed the issue on my own and without your help or Apples help. I'm glad if all forums point here regarding this issue because I now have the answer. The answer I was looking for from someone earlier was as simple as this {Download Maverick and reinstall the platform - it will take an hour to do but afterward 10.9.2 was installed and my computer is now able to shutdown and restart without having to do a hard boot.} No more software update bar at top and no problems with my drive which I told both you and Grant - I know my computer better than you and I've probably been using them longer than you.
So again Babowa you were so wrong...... and I am right.
Again anyone having the same problem, I suggest reinstalling Maverick and you'll be suprised 10.9.2 will work fine. -
Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?
Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/ -
I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. For my personal use, I did not a need to join Creative Cloud. Have you any suggestions for a work-around?
Try to install Adobe application Manager from below link and check
Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager : Thank You -
I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
Thanks!I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."
-
dvd/cd drive works but won't allow me to install new programs from disk, doesn't recognize the disk, what can I do?
Well I was able to obtain a work around download of Flash and it installed fine but Firefox tells me it needs updating so I go out, thinking I'm "IN" finally to update it and I get that issue of not being able to get the update for it. It's a regular laptop, not a touch screen or one of those new fangled ones for todays world. In fact it's a refurb so it's probably origin date was a year or so ago before all this MS stuff took off fully. So not understanding why I'm feeling like I'm being BLOCKED from getting the updated Flash I need and desire. If I click on the little "X" and tell it to ignore the warning the vid will play just fine but don't want to have to do that every time. Must be a better way.
Again, I'm sorry for posting in the wrong forum, getting this posted in the Flash forum was my desire but the way Adobe has this set up I just couldn't figure it out. I belong to ALLOT of forums and most are pretty straight forward but this one is confusing! -
i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your helpIt means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive. -
i'm not able to purchase with itunes from the game clash of clans! I did it the first time, it worked, but now it wont work and says : contact support.
What they mean is iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html
-
Why can't I get my printer to print out a playlist from i-tunes? It used to work, but now the printer doesn't seem to recognize the "print" command coming from i-tunes. The printer works for other applications!
I finally solved this problem after toiling with it for a couple of days. Solution: Once you have burned your CD you must go back into iTunes to your music/playlists and select the playlist you just burned and click file; print and you will get the mosaics that we have been accustomed to. I was on hold with Apple Support when I found this myself. Yes......!!! Problem solved..for me anyway. Good luck!
Scott -
Just had my hard drive replaced but now dont have iPhoto garage band ect the stuff i had on the computer when i bought it.
Reinstall them from your original install disks or your backup.
-
My University email uses outlook and firefox will not let the page open once i log into the university login. It used to work, but now just shows a completely white tab. My email works fine in other browsers. Why?
Make sure that you haven't left a profiles.ini file.
* http://kb.mozillazine.org/profiles.ini_file
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
I bought a camera connection kit. First time it worked fine, using the USB connector, but now neither the USB nor SD connector works. The iPad shows a connector is attached, but Photos doesn't open. Any ideas? thanks
If you have not done so, try exiting the Photo app (and maybe more apps if you have a lot open) from the Open Apps List and see if a discount/reconnect opens the app. If that does not work, try powering down the iPad and test. If it is still not working try a hard reset by pressing both Home and Sleep/Wake buttons at the same time until the Apple graphic appears, ignoring the Slide to Power Off button.
-
Upgrading my iPad2 to iOS6 seems to have worked but now have a 3014 error message, have tried following the support advice but seem to be going round in circles and can't see what is wrong.
iPod linked to my MacBook which is upto date and running Mountain Lion
Noted that my wi-fi here is very slow, could that be an issue?From 3rd link below.
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
1. Install the latest version of iTunes.
2. Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
3. Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
4. Try to restore from another known-good computer and network.
5. If the errors persist on another computer, the device may need service.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
Maybe you are looking for
-
Need help- changing Apple IDs on phone but it won't let me...
My daughter's iphone was logged into my Apple ID for use with iCloud. She now has her own Apple ID. I deleted mine from her phone but am unable to log into hers. Error message states: 'Cannot Sign In. The maximum number of free accounts have been
-
Adapter Specific Message Adapetrs
Hi All, Can you people give some idea on Adapeter specific message attributes(ASMP) in coomunication channel??? Why we use ASMP???????? Kind Regards, Parshuram
-
Doubt about Sync and Async process
hi experts i have one small doubt if we r having the scenario like file to rfc iam passing the input parameter like material number through file adapter and then i want to get the material details response from rfc sap r/3 to file system this is the
-
SOAP Client Error:- INVALID CHANNEL
Dear Friends, I am configuring a simple SOAP to RFC syn scenario . after generating the wsdl when I am testing it using SOAP UI the following error is thrown:- !!!!!1<SOAP:Fault> <faultcode>SOAP:Server</faultcode>
-
Urgent: Parameter problem for jsp
Following jsp when run with portal 9.0.2 displays value of Name and Age but value of Telephone parameter is displayed as Null. Can anybody tell me the reason? Running this jsp on IBM WebSphere. <%@ page contentType="text/html;charset=UTF-8" %> <%@pag