Agfa Snapscan won't open with latest OSX Agfa driver -

A message comes up that I can only click "OK" but never continues to the control panel.
Message: ScanWise can not find the current ColorSync System Profile. Please recalibrate your monitor or select another sytem profile with the ColorSync Control Panel.
Agfa appears to offer no help, so......"help!"

I have that same scanner up in the attic. Worked fine in 10.4, have not used it since I got a newer Mac.
Agfa really stepped up in delivering usable software and drivers in the early days of OS X, but shortly therefter stopped selling scanners to the consumer market. To their credit, you can still get the software here:
http://static.agfa.com/digicam_scanner_drivers/
You might try deleting (or archiving) your Agfa preferences reinstalling the software.

Similar Messages

ITunes won't open after latest OSX update

AFter latest OSX update iTunes won't open. Reinstalled iTunes. Reinstalled OSX update. When I click on icon in applications or in finder nothing happens.

This is what worked for me and others--original post found on this thread: Yosemite slow opening and cannot open itunes
This solved my question by Linc Davis.......
According to multiple reports on this site, Apple Support has given the following instructions to others who had a similar problem. I can't confirm that this procedure works or that it's necessary, but it won't leave you any worse off than you are now.
First, back up all data.
Select the iTunes icon in the Applications folder and open the Info window. Click the padlock icon in the lower right corner to unlock the settings.
In the Sharing & Permissions section, change the Privilege setting for each Name in the list to Read & Write. Close the window. If the settings aren't visible, click the disclosure triangle on the left so that it points down.
You should now be able to drag the iTunes application to the Trash and empty. Your iTunes data won't be affected.
Click the iTunes link at the top of this page, download the installer package and run it.
If iTunes still doesn't launch, or if you can't complete the procedure, reinstall the OS.

My NEF-files won't open with CS6 (osx 10.9.5) anymore...

In earlier days it was posiible to open my NEF-files (Nikon d300) with PS. It is not posiible anymore. Any suggestions?

have you tried to do a software update?

ITunes won't open with Lion osx :(

everytime I have tried to install re-install, and it doesnt work, try connecting my phone, the app pops up but closes.... abyone else having these problem??

i have the same problem
Model Name:          MacBook
Model Identifier:          MacBook3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          4 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MB31.008E.B02
SMC Version (system):          1.24f3
upgrade to lion
when run itunes 10.4, 10.5
get error
Process:         iTunes [461]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         10.5 (10.5b48)
Build Info:      iTunes-10504801~1
Code Type:       X86-64 (Native)
Parent Process: launchd [171]
Date/Time:       2011-07-21 18:48:52.208 +0700
OS Version:      Mac OS X 10.7 (11A390)
Report Version: 8
Interval Since Last Report:          11888 sec
Crashes Since Last Report:           24
Per-App Crashes Since Last Report:   7
Anonymous UUID:                      CA1142C2-2033-465C-9674-65E29F6140BA
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
       0x101af6000 -        0x102a42fe7 com.apple.iTunes (10.5 - 10.5b48) <D11E7FF6-F874-6313-B133-2845CAA1A2F8> /Applications/iTunes.app/Contents/MacOS/iTunes
    0x7fff616f6000 -     0x7fff6172b1ff dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
Model: MacBook3,1, BootROM MB31.008E.B02, 2 processors, Intel Core 2 Duo, 2 GHz, 2 GB, SMC 1.24f3
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xCE00000000000000, 0x4D342037305432393533455A332D43453620
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xCE00000000000000, 0x4D342037305432393533455A332D43453620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST980811AS, 80.03 GB
Parallel ATA Device: MATSHITACD-RW CW-8221
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x1d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0229, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2

PDF file won't open with double click

Mac OSX 10.6.8/Acrobat 10.1.3.
Suddenly pdf files won't open with a double click, I now have to open Acrobat and file>open.
Also, once they're open, they won't close by clicking the red close dot, I now have to go to file>close.
Very frustrating!

Even reinstalling doesn't work with the standard Creative Suite installer. Except for the double-click bug, Acrobat doens't respond to dock-tasks either, like <right-mouse-click> on dock icon and select <quit>.
In this version of Acrobat, the repair function doen't seem to exist anymore. Sadly....
So the problem keeps existing, even with the laterst 10.1.4 version.
==========================
OSX 10.8 - Acrobat Pro X 10.1.4

IDVD won't open with OS 10.5.8 -can't record on to blank DVD discs

When I attempt to open iDVD application, message says it won't open with this OS. Also when I insert a blank DVD (Verbatim) disc am unable to record a film on to it as I get this message: "The disc can't be burned because the device failed to calibrate the laser power for this level of media." I've seen this message on a previous post on this forum but could not see any solution posted. I have recorded onto DVD discs in the past (different make of disc and before I upgraded to Leopard).
I can record on to blank CD audio discs without any problem however.

The first thing to try (IMO important) is not to import directly from your camera. Get a Firewire-connected card reader (USB works also but is slow on Macs) and use the Mac's Finder to copy images from the card to a folder on the Mac hard drive. My description below describes a CF card, but the workflow is the same for an SD card or whatever.
I feel pretty strongly that camera-to-Aperture handling of original images puts originals at unnecessary risk. I suggest this workflow, first using the Finder (not Aperture) to copy images from CF card to computer hard drive:
• Remove the CF card from the camera and insert it into a CF card reader. Faster readers and faster cards are preferable, and Firewire is much preferable to USB2.
• Finder-copy images from CF to a labeled folder on the intended permanent Masters location hard drive.
• Eject CF.
• Burn DVD copies of the original images (optional backup step).
• Eject DVDs (optional backup step).
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location."
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing).
• Reformat CF in camera, and archive DVDs of originals off site.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media.
Good luck! The camera-to-Aperture workflow may or may not be the cause of your specific problem this time but in any event card-to-finder long term will provide a more solid workflow.
-Allen Wicks

Recovered CR2 files won't open with CS3

Hey, I need help with this!
I worked in a photoshoot with a Canon EOS Rebel XSi and SD memory; then I had troubles trying to download them because the memory wouldn't let me do it, so I used the 'PC Inspector Smart Recovery' and I recovered all my CR2 files indeed. BUT! some of them won't open with Photoshop CS3, most of them do, but there's just some others that won't open and I really need to get this job done
My camera files always worked perfectly with photoshop CS3, plugins are installed, I really don't know what went wrong.

I am having a similar problem. I downloaded CR2 files from my camera to my computer and CS3 Bridge will not recognize the files, allow me to open in Camera Raw or open in CS3 Photoshop. I also stuck the same memory card in a Lexar mem card reader and attempted to download to my Mac in CS4 Bridge and that version of Photoshop and Bridge won't recognize the files either, however the CR2 files do appear, where I can view the thumbnails, in iPhoto. All original files are still on the memory cards (4 cards worth of wedding photos!). I've downloaded Camera Raw updates for both cs3 and cs4 on my windows pc and my mac and still no luck. I'm at my witts end! Help!

HT1338 now my version of mail won't open with my version of OS-X

I just updated my software...now my version of mail won't open with this version of OS-X.
What do I do?

Which version do you have? If outdated, use Software Update.

InDesign files won't open with double click

InDesign files won't open with double click on my MacPro with Snow Leopard although they do open from external hard drives when I double click.

Thank you very much,you were correct, it appears the mouse clicks were set too fast. Thank you very much indeed for taking the time to answer my question.
Regards,
Mag1975

I deleted adobe and now files won't open with preview automatically like they use to. How do I fix this?

I deleted adobe and now files won't open with preview automatically like they use to. How do I fix this?

I think you solved my problem! Upon following your advice, I first got a message that I had not allowed a connection to the Tax dept computers, which would prevent the file I need to fill out from being e-filed. I proceeded to then open the file at the top of which was a security banner at which I chose the site as safe. I then filled in the first line of the form which autofilled other lines telling me I was connected with the tax site. In a few days when I have the data I need, I will actually attempt to file the return. If there is a problem, I will send another message. Thanks so much for your assistance!

WMP won't open with 4 as of today's install

WMP won't open with 4 as of today's install
Simple enough
Goes to a white screen

Hi,
Have you tried to fix a broken install that Andy ONeill provide in his article, from my experience, this may be the issue, please clean a corrupted Silverlight installation and then reinstall Silverlight, I would suggest you not use Chrome to install
Silverlight, because the Chrome will not support Silverlight at September 2015, refer to
http://blog.chromium.org/2014/11/the-final-countdown-for-npapi.html for more details.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT204382 Got a 75MB video file tagged ".flv" Won't open with Quicktime. What do I need?

Got a 75MB video file tagged ".flv" Won't open with Quicktime. What do I need?

Download vlc player. It plays most formats of video and audio.
Ryan

Weird issues with latest X-Fi Driver/Software

-Weird issues with latest X-Fi Driver/SoftwareO So I decided to update my X-fi drivers and software today, but I am running into some issues.
First and foremost is that my Volume Panel no longer works correctly. It brings up this cheap pos window when I click on the Systray icon instead of the corrrect full featured interface.
It lists the merdia source programs and has a volume dial, thats all this new one has.
The other issues are that none of the software updates want to install: Alchemy, Mixer, Mediasource Go
They all give me a message after I being to install that says "can not locate layout.bin please specify the path"? and gives my a "this setip reqires a cd" window and lists a path to a temp folder inside my windows folder.
Installing these for Vista? Ultimate 32-bit.

-Weird issues with latest X-Fi Driver/SoftwareO So I decided to update my X-fi drivers and software today, but I am running into some issues.
First and foremost is that my Volume Panel no longer works correctly. It brings up this cheap pos window when I click on the Systray icon instead of the corrrect full featured interface.
It lists the merdia source programs and has a volume dial, thats all this new one has.
The other issues are that none of the software updates want to install: Alchemy, Mixer, Mediasource Go
They all give me a message after I being to install that says "can not locate layout.bin please specify the path"? and gives my a "this setip reqires a cd" window and lists a path to a temp folder inside my windows folder.
Installing these for Vista? Ultimate 32-bit.

My microsoft word won't open anymore in macbook pro with latest OSX

I had installed OSX latest version some months ago and there was no problem with opening all documents in words.
Just today I can open the word document but stalled and could not edit as there is a rolling icon (processing) appeared.
I did remove the word program by using my MacKeeper software remove installed program.
Then I insert the Microsoft Office 2011 original CD to reinstall the microsoft office again.
Before the crash and after the reinstallation both My Excel and Powerpoint are doing ok .. can
be opened and used to edit ppt and xls documents.
Before the word program removed .. when I opened the word document just appeared
"opening normal dot" message. This had never happened before the stalled opened
word document.
I did also restart the macbook pro (version 2011 manufacturing date) but now my word
even can not be opened with error reporting message as follows:
"Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2014-07-14 16:15:42 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.0.0.100825
Crashed Module Name: unknown
Crashed Module Version: unknown
Crashed Module Offset: unknown
Blame Module Name: unknown
Blame Module Version: unknown
Blame Module Offset: unknown
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0"
what am I supposed to do to ? I try to googling the topic but can not find the exact similar incident in google search
results. Is this some kind of a virus attack ? Does anyone can recommend any solutions that work?
Thankyou so much for your sharing and suggestions.
Leks

I am running Word for Mac v 14.2.0 quite happily on my iMac 27" running Maverick 10.9.4.
Possibly it is due to issues with your Retina screen? The obvious first step is to update Word to the latest version.
Virus attacks are not the first guess on a Mac. I have never ever had one nor even been able to locate any malware for well over a decade. Word can harbour Macro viruses but I thought that the Mac version of Word didn't do macros.
Either way this is not the place to get your answers. Pages is not Word. Use Microsft's support forums for their software.
Peter

Keynote 6.5.2 update won't open with Yosemite 10.10.2

Keynote 6.5 won't open even though I've updated it from 6.2.2. My OS X version is Yosemite 10.10.2. I get the error: Install the latest version of OS X, then download the latest version of Keynote from the Mac App Store. I have done all possible updates and restarted my computer and still this error happens. On my other computer with OS X 10.10 Keynote 6.5 opens just fine. How do I fix the problem with it not opening in 10.10.2?

Hello gradinc,
It is hard to say what this could be. If you are still getting prompts to upgrade Keynote, it may be trying to open an older version. I would try and delete Keynote and then download it again. I would also try to open it within Launchpad or opening it directly from the Mac App Store to see if the error comes up again. If it does let me know.
OS X Yosemite: Install, update, and uninstall apps
https://support.apple.com/kb/PH18752
Regards,
-Norm G.

Agfa Snapscan won't open with latest OSX Agfa driver -

Similar Messages

Maybe you are looking for