Agg level, filter and plng function

Hi,
I have selected all objects from infoprovider in agg level.
In FILTER i selecte 5 characterists and gave restrictions.
In planning function [COPY), I selected 7 characteristics and gave from change and TO change criteria.
In planning sequece i gave the agglevel, filter and planning function.
1. What will happen when i execute to planning function when i selected more number of characteristics which are not in filter?
2. Will this impact in any way when i create input ready query?
3. What are the main things that need to be considered when creating inupt ready query?
Thanks
Annie

Copy function will work for those models which you have included in Filter.
Regards
Githen

Similar Messages

How do I make audio levels a1 and a2 function together?

Is there an Avid gang function? I have my linked selection highlighted but every time I want to raise or lower my audio channels it goes one track at a time...
Thanks

To make life simpler, you should capture in stereo. The button to click in the log and capture screen under the clip settings tab is the little unlabeled and poorly documented icon to the left of the A1 and A2 audio tracks--looks like a cassette tape. Clicking this icon toggles stereo/mono capture. Once you capture in stereo, you will be much happier because the A1 and A2 tracks in the timeline will be automatically linked.
Brian

Flickerring after applying auto levels filter

Don't have enough lighting on my clips. I added the auto levels filter and it looks great, but I notice lots of flickering when there is movement. The flickering did not exist before applying the filter. And when I apply the anti-flicker filter it doesn't seem to do much. Would a software like Avid be better at adding light to a clip? Is there something else I could do with Adobe Premiere CS3 to address this problem?
Thanks

Don't use Autolevels. You rarely get good results with the easy button
solution. Use Curves instead.

Adding Page Zoom and Print Functionality in Indesign CC

Is there (still) no way to add page-level zoom and print functionality to SWF files created in and exported from Indesign CC? Thank you

probelm solved.

Display Report Level Filter value and Input Controls Value

Hi,
Please let me know how to display Report Level Filter value and Input COntrol values in the report.
I have 2 tabs in the WebI Report. The first tab has the summary details about the other tabs like reprot desc, prompt values, reprot filter values,etc.
In the 2nd tab I have the actual report which has input controls defined, prompt values and global level report filters.
Can anyone please tell me how to display the Report level filter values and the Input Control values in the first tab report.
For ex: Tab 2 has a Report level filter: Region = NA
I need to display in Tab 1 in as Region: NA
I used the function ReportFilterSummary but that is giving me other details, I want only the object name and the value.
Also how to dispaly the Input Control values in the tab 1.
Please let me know if you have any suggestions for this issue.
Thanks

did you try
=ReportFilter([Year])
if you are making report filter over the year, it will return the value of the filter
by the way, the filter should be applied over all the report not to a specific block to be able to get the correct value
the Input control also considered as report filter, only if you're applying them on the level of the report, if you applying an input contron over a specific block or chart, you will not get the values for ReportFilter
good luck

Function modules to get wbs level budgets and activity level cost

hai gurus can any one tell me the function modules or any other bapis to get the wbs level budgets and activity level costs
thanx in advance
afzal

ok

Things to be considered before AD - domain and forest functional level upgrade (win 2003 to 2008 R2)

Hi
Recently we introduced Windows 2008 R2 DCs and decommissioned old Windows 2003 domain controllers. Since we are not sure about the application compatibility (both MS and 3rd party) many times we postponed the plan to upgrade the DFL and FFLs. We found Jonathan's
blog (http://blogs.technet.com/b/askds/archive/2011/06/14/what-is-the-impact-of-upgrading-the-domain-or-forest-functional-level.aspx),
whcih clearly says the upgrade won't affect any applications. But just to confirm this with the experts we are posting this concern once again. We have Exchange 2010 / Shrepoint / SQL / SAP etc..(also 2 X windows 2000 servers)
Please let us know from your real experiance - in production environment how a upgrade from 2003 to 2008 R2 (belive we can able to upgarde both FFL and DFLs from Win 2003 to Win 2008 R2) affects existing applications.
Thanks in advance
LMS

I might be able to help with Exchange. What service pack?
Most likely, there should be no problem. The Exchange compability matrix shows that (with SP2 and SP3) it is compatible with Windows 2008 R2 domain controllers and 2008 R2 domain and forest functional levels.
I'm *working on* an Exchange 2010 migration but if you want someone who *has* such a combination (2008 R2 DFL/FFL and Exchange 2010), you could ask in the Exchange forum.
I'm sure, though, that such a combination is actually quite common.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Can I get the tab's(Level 1 menus) invoke function's URL and parameters

Hi,
Can I get the tab's(Level 1 menus) invoke function's URL and parameters in CO?
Not just the tab being seleced,All the tab's nvoke function's URL.
Thanks,
binghao

I got it.use OALinkBean's method getDestination()

Noise reduction function built into built into graduated filter and adjustments brush!

Really useful functionality, but maybe the tool name shout be "Noise reduction" rather than "noise" for the graduated filter and adjustments brush. If I understand it correctly, the way all the sliders work now is that that movement to the left decreases the function of the slider, and to the right increases the function - if that is the case, then by labelling the slider "noise" would suggest that moving to the right is increasing the noise when in fact it is the reverse!

The explanation is that "noise reduction" doesn't fit the available space in all languages.

Forest and domain functional level Windows Server 2012 R2 - what's new?

Hi, I still can't find documentation about the new domain and forest functional levels in WS 2012 R2.
a) "What's New in Active Directory in Windows Server 2012 R2"
http://technet.microsoft.com/en-us/library/dn268294.aspx
No word about it.
b) "Understanding Domain and Forest Functional Levels"
http://technet.microsoft.com/en-us/library/cc771294.aspx
Still WS 2012.
Thorsten

For what's New in Active Directory in windows server 2012 R2,
Read the following Blog
http://policelli.com/blog/archive/2013/06/27/whats-new-in-active-directory-in-windows-server-2012-r2-preview/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer".

FOX on Agg level of a Multiprovider - clarification

Hi,
Iam facing a problem with FOX not generating new records.
Scenario:
There are projectization% foreach WBS and Costelement wise in the source Cube.(ZHR_PROJ)
The Target cube(ZOF_R01) has no %s in it initially on opening the layout but only AMOUNTs. Layout is restricted with target cube-ZOF_R01. On executing the Plng Func, I want to copy the projectization%s foreach WBS and not Costelement wise in the Source cube(zhr_proj) to the WBS and Costelements in target cube(zof_r01). The set of CostElements in Source & Target cubes are completely DISJOINT sets.
The data trace(execute with trace) data records are as below:
Series     Data     Change Indicator     WBS Element     Cost Element     Amount (Group Crcy)     Projectization %     InfoProvider
1     Before     Unchanged     CT.0001.AU10.10.01.001     300010       5,889.08       0.0     ZOF_R01
1     After     Unchanged     CT.0001.AU10.10.01.001     300010       5,889.08       0.0     ZOF_R01
2     Before     Unchanged     CT.0001.AU10.10.01.001     307080       5,000.00       0.0     ZOF_R01
2     After     Unchanged     CT.0001.AU10.10.01.001     307080       5,000.00       0.0     ZOF_R01
3     Reference Data          CT.0001.AU10.10.01.001     300020       5,889.08       0.0     ZOF_R01
4     Reference Data          CT.0001.AU10.10.01.001     300030       0.00       40.0     ZHR_PROJ
5     Reference Data          CT.0001.AU10.10.01.001     300040       0.00       40.0     ZHR_PROJ
6     Reference Data          CT.0001.AU10.10.01.001     300050       0.00       40.0     ZHR_PROJ
7     Reference Data          CT.0001.AU10.10.01.001     300070       0.00       40.0     ZHR_PROJ
8     Reference Data          CT.0001.AU10.10.01.001     300080       0.00       40.0     ZHR_PROJ
9     Reference Data          CT.0001.AU10.10.01.001     300110       0.00       40.0     ZHR_PROJ
10     Reference Data          CT.0001.AU10.10.01.001     300190       0.00       40.0     ZHR_PROJ
11     Reference Data          CT.0001.AU10.10.01.001     301060       0.00       40.0     ZHR_PROJ
12     Reference Data          CT.0001.AU10.10.01.001     307080       5,000.00       0.0     ZOF_R01
What is expected is :
1     Before     Unchanged     CT.0001.AU10.10.01.001     300010                                 5,889.08          0.0     ZOF_R01
1     After     Unchanged     CT.0001.AU10.10.01.001     300010                   5,889.08          40.0     ZOF_R01
2     Before     Unchanged     CT.0001.AU10.10.01.001     307080                   5,000.00          0.0     ZOF_R01
2     After     Unchanged     CT.0001.AU10.10.01.001     307080                   5,000.00          40.0     ZOF_R01
FOX written as follows:
TOTAL_P = 0.
FOREACH L_WBS,L_CE.
          L_PROJP = {ZPROJ_P, L_CE, ZHR_PROJ, L_WBS}.
          TOTAL_P = TOTAL_P + L_PROJP.
     {ZPROJ_P, L_CE, ZOF_R01,   L_WBS} = TOTAL_P.
ENDFOR.
Do I need to consider Costelement in the Agg level? because while calculating the %s i need to do it at WBS wise , whereas while assigning it to target i need to assign it to Costelement and WBS wise.
Just to sumup:
Source:(ZHR_PROJ)
WB1   CE1   20%
WB1   CE2   30%
WB2   CE2   35%
WB3   CE1   25%
WB1   CE4   35%
Target:(ZOF_R01) - before execution
CE10   WB1 $500 0%
CE10   WB2 $300 0%
Target:(ZOF_R01) - After execution(what is expected)
CE10   WB1 $500 85%
CE10   WB2 $300 35%
Is this possible?
Can anybody suggest good examples of FOX with foreach in reference data, foreach in selection..?
Thanks
Shyam

Hi,
     Did you change the 0INFOPROVIDER restriction after changing the key figure mapping in the multiprovider?
Because even if you change the mapping, you have to change the query restriction also.
Can you share the requirement for which you are trying to include both the planning cube and it's aggregation level in the same multiprovider?
Because normally if the aggregation level is included in the multiprovider then there is no need to include the corresponding planning cube and vice versa.
Regards,
Balajee

Plng folder: user inputs has to save automatically,before plng function exe

hI friends,
at plng folder level, user enters selections(varibles area) and input values in input area. Next runs plng funciton, which do some calculation at background(formula function) and showed results in output layout.
Can i make user entered variable values & input values automatically save, when user clicks plng function? Here if we not provide this provision, user has to save both varibles values & input values before running plng function.
thanks,
kumar .

If you are doing this in BPS then refer to the following thread and how to paper.
Re: Automatic save function in planning folders
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e032e790-0201-0010-8bae-f9bc2b1e5aaa?overridelayout=true

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

Problem with tpcall and tpgetrply functions

Hi,
I have a problem with tpcall() and tpgetrply() functions.
In this example (invoke tpcall()):
FBFR32 *buf;
FLDLEN32 buflen;
buf = a_buffer.getBuffer(); /* getBuffer() returns FBFR32* */
buflen = a_buffer.getLongitud();
/* at this point: buf == a_buffer.getBuffer() */
if (tpcall(a_contenedor.getServname(),
(char*)a_contenedor.getBufferPeticion()->getBuffer(),
a_contenedor.getBufferPeticion()->getLongitud(),
(char**)&buf,
(long*)&buflen,
0) == -1)
if (tperrno != TPESVCFAIL)
LANZAR_EXCEPCION(CADENA_WHAT_SB,
"Error en funcion Execute(), llamada tpcall()",
tpstrerror(tperrno))
/* at this point: buf != a_buffer.getBuffer() */
tpcall() function change the memory address of buf. What is the problem? Is wrong my code? Is a problem with tuxedo version?
My tuxedo version is:
tmadmin -vINFO: BEA Tuxedo, Version 8.0, 32-bit, Patch Level 306
INFO: Serial #: 650522264137-773290431251, Expiration NONE, Maxusers 150
INFO: Licensed to: Telefonica Moviles Espa?a, S.A.
INFO: 56-bit Encryption Package
Thanks,
ANTONIO.

There's nothing wrong with your code or tuxedo. tpcall (and tpgetrply) can change the address of the return buffer if it needs to allocate more memory to hold the data. This is the reason why you pass a pointer to the buffer as the output buffer parameter to tpcall and tpreturn. Everything is working as expected.

Query level filter not working in Webi report

Hi All,
I am using BOXI R3.1 (SP3), m facing one problem when refreshing Webi report on daily basis. I am using three query level filter as a prompt, but i checked one filter is not working then i need to reapply this filter and rest 2 filter is working fine.
Can anyone suggest me why problem is coming?
Regards,

Hi,
Prompts are interactive, and come from the query panel. Filters are not interactive, and are set on the report or block. There are also input controls, which are interactive filters
1. Select the universe in the list of universes to open the Query Panel.
2. Drag the Year object to the Result Objects pane.
3. Drag the Number of Guests object to the Query Filters pane and create a report filter that restricts Number of Guests to greater than n.
4. Click Combined Query.
The Combined Query pane appears in the bottom left of the Query panel with the two queries joined by UNION.
5. Click on the second query and remove the Year and Number of Guests objects.
6. Drag the Reservation Year object to the Result Objects pane.
7. Drag the Future Guests object to the Query Filters pane and create a report filter that restricts the future guests to greater than n.
8. Click Run Query.
Best Regards
Naveen

Agg level, filter and plng function

Similar Messages

Maybe you are looking for