Aggreegate
dear friends
i createdan aggregate, loaded data to info cube and did rollup. The aggregate is active then i created a query on the Infocube and executed it. But I can not see the Usage counter going up. It is still showing as 0 any idea why?
Hi,
I think the aggreagte is not being used. U can check this in the RSRT .
Go to this transaction and Select the Query u want to executs and click on debugg and Execute . A window will pop . In that u select the Aggregates but dont use Cache.Now u run the report u will get to know why it is not being used.
Hope this helps.
Rgds,
Ravi.
Similar Messages
-
Interview question being asked
Hi All,
I was asked interview techinical question. I was not able to answer these. can anyone tell me what are the answers for these!
Q How do you convert Basic cubes to Transactional Cubes?
Q Diffrence between version Bw3.5 with other older version like BW 3.0, 2.1
Q what is Rollup, why we use it? (i Answered this one but not staisfactory accrding to the interviewer)
Ans To apply newly loaded data to aggregates you use rollup. You can maitain aggreegates in rollup.
He said but what it is ?
Thanks
GauravGaurav
Check these links also
http://sap.ittoolbox.com/documents/document.asp?i=3240
http://www.techinterviews.com/?p=198.
http://www.fundoosite.com/interview-questions/type.asp?iType=72
http://www.sapassist.com/documents/document.asp?i=3240
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm.
Thnaks
Sat -
How to know whether a particular query is using the aggregates
hi all....
im very new to this group so plz help me out.....anyway hi to all ....
There are many aggreegates are there but how to know which query is using perticular a?gregatesHi,
use query monitor screen RSRT and select the option execute + debug . and u can have the option of checking display aggreagates for that query!
cheers,
ravi -
Selective deletion for particler cube and rebuild of aggrigates in Psystem
Hi Friends,
1.In my manage data target screen i have 8 cubes but i want do selective deletion from 1st cube ..how i can do ..?
Im thinking like...IN DETILS column i will select.one data target and then i will go to contents tap and then selective deletion for paricler requst ID...is correct to do selective deletion for particler data target out of 8 cubes..plz tell me
2.in production ...while doing selective deletion ...aggregates are failed...means status is in red color...
now,how can i create or build or rebuild those aggrgates again...please and my qns...
Thanks in advanceHi
1. technically Yes its ok to do selective deletion of only 1 cube, incase of delta load you will have to do selective reload to only that cube otherwise data for that perticular selection will get doubled in rest of 7 cubes.
Actually depends on situation in which you plan to do so.
2. its possible to aggreegates get affected due t selective deletion.
Just go to manage->rollup tab of cube and rebuild agreegates.
Hope this helps.
Regards
Sudeep -
Post Author: sony
CA Forum: Olap
1.I am creating a data warehouse without using any ETL tools from the OLTP.For this , i can fetch the data by using aggreegate concept. How many other ways by which i can fetch the data?2. How to use incremental approach and fullfresh Approach to build data warehouse for automatic updation?3. Details of logical data model and Physical data model.Post Author: amr_foci
CA Forum: Olap
1- i hope i got you right,, u want to populate ur data warehouse without using any tools??
you can do that using database Links "its supportred by oracle", or even you can use SQL loader for oracle too, or to export and import ur data using flat files
2- for incremental approach (CDC) capture data changed, u can put an access date filed in ur source database, and when you select from the source to the destination keep in mind the creteria of that filed
hope this helps you -
Could u explain the business process
hi guru's
could u explain the business process scenario , how it works in bw . could u explain detailed, suppose to take CLINT NOKIA MOBILE AND MY EMPLOYER SOME XX COMPANY,
CAN U EXPLAIN DETAILED?Hi Prabha,
Aggregate Definition :
An aggregate is a materialized, aggregated view of the data in an InfoCube. In an aggregate, the dataset of an InfoCube is saved redundantly and persistently in a consolidated form on the database.
Use
Aggregates allow quick access to InfoCube data during reporting. Similar to database indexes, they serve to improve performance.
An aggregate is made up of the characteristics and navigation attributes that belong to an InfoCube. Characteristics that are not used in the aggregate are compressed.
Each component of an aggregate has to be assigned to a selection type. A selection type indicates the degree of detail to which the data in the underlying InfoCube is aggregated. You can choose one of the following selection types:
All characteristic values ("*"): The data is grouped by all values of the
characteristic or navigation attributes .
Hierarchy level (H): The data is grouped by the hierarchy level node. You can
also store values on the hierarchy levels of an external hierarchy .
Fixed value (F): The data is filtered by a single value .
For each InfoCube, you can set whether the aggregates of the InfoCube are compressed automatically when it is filled with data or after the roll up of data packages (requests).
1. You are in the Data Warehousing Workbench in the Modeling functional
area. In the InfoProvider tree, navigate to the required InfoCube.
2. In the context menu of the InfoCube, choose Manage.
3. In the lower part of the screen, select the Roll Up tab page.
4. Under the Aggregates group header, set the corresponding indicator in
the Compress After Roll Up field.
Standard Aggregation : This means how the key figure is going to be summarized normally for a specific set of characteristics .
Eg : Quantity across all the purchase items for a purchase Order
Exceptional Aggregation : You define how the aggregation should happen basing on a particular characteristic ( Usually time characteristic ) .
Eg : head count ( No of Employees ) in a organisation ..--> this should not be summarized on a daily basis..instead this should give a final value at the end of the month .
Aggregation is basically for keyfigures .
take a look at this doc, you will find all your answer:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cbd2d390-0201-0010-8eab-a8a9269a23c2
Refer this for aggregates
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
Aggregates versus Physical Cube Splits?
http://help.sap.com/saphelp_bw33/helpdata/en/c5/40813b680c250fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ca/aa6437e7a4080ee10000009b38f842/frameset.htm
Question1: how we will see the based on aggreagate what querys are running
I think "aggreegate maintance screen ---proposal -
query proposal" i am right ,if it is worng pls correct me?
Answer 1:
There are two tools that are used to analyze which aggregate is suitable for which navigation step.
You optimize the start screen of a query with the query Monitor (transaction RSRT) if you execute the function Execute + Debug.
With the trace tool (transaction RSRTRACE) you can draw several navigation steps, and process them again using the function DB Debugging (exact path: Transaction RSRTRACE > Goto > User Logs or All Logs > double-click on the log you want > DB Debugging).
Refer The OSS note 99010
Question 2: When i am creating a aggregate what charteristics we choose i mean based on report/some thing else?
Answer 2:
By refering the Statistical data and comparing the Proposed Aggregates we can create the aggregates.
The above RSRT and RSTRACE will be more useful tools to plan an Aggregate.
Refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a67abe07211d2acb80000e829fbfe/content.htm
and other option is:
Refer page 36 in this PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
Question 3:
When we are crearting a agreegate one message box will apper in that we one option "proposed aggregate" wht does it mean how it work??
Answer 3:
Based on the Statistical data and query-aggregate data system will propose the new aggregate definitions.
Question 4:
under what senario we apply for query performance aggregates??
Answer 4:
Refer this PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cbd2d390-0201-0010-8eab-a8a9269a23c2
For more info refer:
http://help.sap.com/saphelp_nw04/helpdata/EN/7d/eb683cc5e8ca68e10000000a114084/frameset.htm
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D133%26threadID%3D51253%26messageID%3D526450%23526450
You have a aggregate document by SAP in http://service.sap.com/bi -> BI Infoindex which would answer all your questions.
http://help.sap.com/saphelp_nw04/helpdata/en/7d/eb683cc5e8ca68e10000000a114084/content.htm
It would be very useful for you to go through the performance tuning with aggregates documents here:
Business Intelligence Performance Tuning [original link is broken]
Look at the thread below for index:
Indexes, Aggregates , partitioning of cube
Hope this helps.
Regards,
Ravikanth -
Data doesnt come through in the cube
Hi all,
I loaded flat file in the cube, the data not in the cube but the data in PSA....
cube is normal cube, doesnt have aggreegates...just normal cube...
Please give me step by step...where do i look what should i do...
am new to bw
Thanks,
sidharthaHi
Am using BW 3.5 version, in the update tab, i did like this
Full update
Always update data, even if no master data exists for the data
and
error handling i selected, valid records updata, reporting possible (request green)
terminate after no errors: 9,999,999
in the processing tab,
PSA and Data tagets in parallel (package by package)
even i deleted request and loaded data several times but no use
still data not in the cube but in PSA
Please help me out from this problem
i will be very gr8ful to you....
thanks
sidhartha
Maybe you are looking for
-
Is there a way to search contact list by keyboard
is there a way to search the contacts list with the keyboard rather than scrolling down via letters? i have like 2000 contacts and some letters are really long. would be much better if there was a search box (like that for SMS) where I could input le
-
Can I stream content from my Macbook Pro to HDTV using Apple TV
Can I stream content from my Macbook Pro to HDTV using Apple TV?
-
I can't open a new tab anymore; what happened?
In the last few days, when I try to open a new tab, nothing happens!
-
CODEC options on AVCHD video import
Pardon my posting this in 2 forums... I am importing AVCHD file (from a Canon Vixia camcorder) recorded at 1920x1080 30P. After searching around I am using Roxy Toast Titanium. My goal is to import them for editing in FCE, without changing resolution
-
I have used OMWB "generate Sql Loader script " option. ANd received the sql loader error. The previous attempt to use OMWB online loading has generated garbage data. The picture was not matching with the person id. Table in Sql Server................