Aggregate check tool

Hello All,
I trying to set the aggregate check everytime there is a load so that we dont have to worry about data integrity. Now I have gone through all the notes that tells me about the aggregate check tool. I tried doing this and it allows me to select the complete check with change run and then also allows me to select the aggregate. Now when i come to the screen of the transfer option , i click on it and it says cannot make changes to repository and shows me the display mode. This is in a production system, so the system is locked down. Is there a way around this to set this withouth opening up the system.
Any answers are greatly appreciated.
thanks
amit

I've used the aggregate check tool a little in or test environment but not in P. Haven't had problems with aggregates generally. Is this a result of problems or more of a precaution. Some of the aggregate check processes can take a while to run, its essentially like refilling your aggregeate and then comparing it to another copy.
At any rate, I think the issue is that you are creating a variant for the program. So do you have the authority to create one in P? If not, sounds like you would have to transport. Might try using SU53 to see if it is an Authorization problem.

Similar Messages

Aggregates check

Hi ,
I m checking the aggregates , but size of that is very big .
Every time when i do the aggregate check it gives
' ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
Job cancelled'
Can you please suggest ?
Thanks
Don

Hi Don,
You can have a look at SAP Note 903258 for this.
Best Regards,
Kiran

DPM 2007/2010 Health Check Tools

Hi there,
I've had a look through the existing forum threads, but am unable to find an answer to my query.
I am looking to find a range of DPM health check tools, or Powershell Scripts, that would help me perform a Health Check on a 2007 environment, with a view to an eventual upgrade path to 2010/2012
I am hoping to avoid analysing each event ID and every backup operation in order to make a report to management.
Many thanks in advance
Rory

Hi,
This is the only DPM Health Check script available. Here is the link:
https://gallery.technet.microsoft.com/DPM-Health-Check-9628e68f
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!

Where can I download Group Policy Health Check Tool v.1.0?

I once saw a screenshot of this tool (Group Policy Health Check Tool v.1.0) from some document. However, when I search on line for it, it looks like this tool simply does not exist. Can someone help me?

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.
Andy Qi
TechNet Community Support

I'm having a problem with FF forgetting Username & Passwords to occasional sites, checked Tools options which is set correctly.

Hi
Twice this last few days, on different sites, FF3.6.10 has forgotten well used Usernames and passwords. First time it re-learnt after manually sign in.
Second time FF totally refuses to learn the Username and Password for the site. Tried 3 times after checking Tools>Options
Not blocked via site exceptions
Privacy> Clear history when FF closes>Settings>Data> PSWD NOT set
Thanks
Mike

Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
If the latter happens then you have a problem with cookies that are not kept or the file that stores the cookies is corrupted.
* Websites remembering you and automatically log you in is stored in a cookie.
* You must allow that cookie (Tools > Options > Privacy > Cookies: Exceptions), especially for secure websites and if you let cookies expire when Firefox closes
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
See also http://kb.mozillazine.org/Websites_report_cookies_are_disabled

Directory database consistency/repair check tools

hi,
my understanding is that the directory uses ldbm database backends for the changelog and diretcory dtaabase files? is this correct?
if so are there any consistency/repair checking tools available to use on these? (apart from doing db2ldif dumps etc)
thanks

Sun DS 5.1 uses Sleepycat (Berkeley) DB version 3.3.x.
I'm not sure if Sun provides db consistency checking tools. They might be in the DSRK. I suppose you could download the free source code from sleepycat and build them yourself.

UME consistency check tool

Hello
Iam running on EP6 Sp14.
can anybody tell me where I can find the UME consistency check tool on portal and how to run the tool.
Is there any risk of losing the data if i run the tool.
Thanks,
Master.

Hi,
Oh, that's relatively easy: Go to service.sap.com/swdc, Download -- Support Packages and Patches -- Entry by Application Group -- SAP NetWeaver -- SAP NETWEAVER -- SAP NETWEAVER 04 -- Support Package Stacks -- Support Package Stacks -- Target Stack: 16 -- Source Stack: 14 -- Usage: EP (& maybe TREX) -- choose plaforms -- Download all files.
See note 844093 and the referenced guide for details how to de-car the files, how to put them together and for details about starting sapinst etc.
If you are upgarding to SP16, don't forget to patch KMC to Patch 3.
Hope it helps
Detlev
PS: Patching 14 to 16 (WAS/EP/KM/TREX, if this is needed completely) takes about 6 hours, 2 hours WAS, 2 hours EP, 1 hour KM and 1 for TREX; much depending on your machine, of course...

Hardware Configuration Checker Tool??

A while back I found a tool in Cisco's web site that would allow you to select a switch, enter in its modules and check the configuration for errors... Does any one have a link to that tool? I cannot for the life of me find it again...

I know this is a very old thread, but for those who happen upon it, the tools other users have linked here have since been retired for the Cisco Commerce Build & Price Tool at https://apps.cisco.com/ccw/cpc/guest/home.do?flow=nextgen#!/
Under Estimates and Configurations, select Create Configuration. A new Configuration Set will be created.
Expand the Service Preferences toggle button (+) and choose whether or not you want the tool to add recommended services.
Click the Find Product link.
In the Search textbox, type at least 3 letters of your item name/description (e.g. "nexus 7000") and click the Search button.
Scroll down to find your hardware and add it to your cart by clicking the + sign next to the item.
Click the Add button in the resulting box under Selected Items.
On the subsequent screen, scroll down to your saved item and click the Select Options link to configure PSU's, supervisor and I/O modules, etc.
The Show Incompatible SKUs link will show you when options you've selected are incompatible.
HTH.
The Advice, suggestions and/or instruction are offered here without warranty of any kind, stated or implied. Although tested and thought to be correct at the time of writing, the author and associated entities shall not be held liable for any inconsistencies or errors herein.

Aggregate Devices Tool is Broken

I'm creating an aggregate device incorporating a number of devices with the same hardware configuration (hence the same name and manufacturer) through USB hubs.
However, the aggregate devices editor - whilst showing up the devices - and whilst all devices can be used as outputs for iTunes for example, refuses to accept that more than 1 input channel or 2 output channels are available in total, even with 7 half-duplex devices attached.
This configuration should provide a total of 14 channels of output and 7 channels of input (7 mono mics).
Each of the devices show up under coreaudio named...
C-Media USB Headphone Set
Inside, these map to something like this...
'AppleUSBAudioEngine:Unknown Manufacturer:C-Media USB Headphone Set :fd110000:1'
If I attach two directly to the Macbook (e.g. not through a hub) then everything's fine.
However, wherever two or more are gathered together in the name of 'C-Media USB Headphone Set' through a hub, then the problem with lost audio channels is experienced.
Anything I can do to avoid this problem. In the end I have 16 to attach altogether and only two usb ports on my Macbook.
I experience this problem with three different USB 2.0 hubs both powered and unpowered from completely different manufacturers.
Looks like I'll have to move to Linux or Windows to get this audio setup to work.

I've had some contact with support and it appears to be a
problem with Flash choking on a font. None of my fonts are corrupt
(and I don't have any issues with any other apps), but if I remove
all my fonts but a few basic ones, the text tool works okay. I'm in
the process trying to isolate the problematic font(s) out of the
1000+ fonts that I have... yay...

How to run Portal Consistency checker tool in server

hi,
i m upgrading my portal application to 8.15 from 8.12 and for that i need to run portal cocnsistency checker to update my portal libararies,
can anyone please tell me step wise what shudbe done in order to run that consistency checker on my server in order to update my portal libararies,
currently its in my local system and a zip files.
please help me out with this, once this is done , i m almost done.
many thanks,
naveen

Thanks for your reply.
I have gone through the link on oracle migration and i am tried to run but due to error its not been run properly.
The error shown is as follows:
The Error which is been shown is:Error Command .Could you please help me to find so that i can run Migration tool .I have used the command
Migrationtool -u <username> -s <CRM on Demand Server> ReadAll Picklist.
appreciate your quick reply.
Thanks,
Manish

Patch Check Tool v. 1.2

Hi
I have used this and downloade a patch-bundle (tar-file)
In this patch-bundle there is a lot of zip-files.
But like the 8_Recommended.zip there is not a patch-order list.
Do I have to make such a patch-order list myself ??
Must i check each patch to see which one to install first ??
/Frank

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.
Andy Qi
TechNet Community Support

Prerequiste Checker Tool Installation

Hi All
I am attempting to run the 'Prerequisite Cheker Tool' to find out the ocnfiguration gap in our system for Solution Manager Installation.
When I execute 'start‌InstGui.sh'..I receive the following error
java.lang.RuntimeException: invocation target exception: Can't connect to X11 window server using '3.137.168.137:21212' as the value of the DISPLAY variable.
Here is the env variable setting
DISPLAY=3.137.168.137:21212 ( I am running 'start‌InstGui.sh' on the same server, I guess this is wrong )
What should be the 'host' & 'port' values for the DISPLAY Environment variable.
Please help. Thanks

Thanks shaji..
Could you please brief the 'Remote Desktop connection' setup?
I am executing the script in Linux environment.
DISPLAY hosst should point on other unix host or windows host ?
between, 0.0 > conveys what ?
Edited by: Prakash Nathan on Apr 2, 2008 9:31 PM

When I open Firefox, it opens all the tabs that were open when I closed it last time. How do I change this so it only opens my homepage. I have checked Tools/Options/General/Startup and it shows "When Firefox starts" ... "Show my home page". HELP!

This hasn't always happened. It just started a few days ago and I don't know what triggered it.

Did you see this article linked from the main Firefox Help page?
[[Removing Babylon, SearchQU or MyStart]]
Post back if you need more help.

Criteria for building Aggregates

Hi Friends
I need to build aggregates on the top 10 worst performing queries according to this criteria..
1. No. of navigation .
2. DB Time > OLAP Time.
3. Ratio of selected records from DB to transferred Records.
I have found out already 10 queries.
But I need to know that whether these queries are already using these aggregates or aggregate are already built for these queries.
Could you please tell me the procedure how to proceed furthur.
Thanks

Hi,
There are a few SAP notes on the same which discuss this in detail.
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
Note 202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
Best Practices for Creating and Optimizing Aggregates in SAP BW
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e55aaca6-0301-0010-928e-af44060bda32
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/c9accf89-0701-0010-78b5-d37040534c76
Hope this helps.
Thanks,
JituK

Report taking too much time in the portal

Hi freiends,
we have developed a report on the ods,and we publish the same on the portal.
the problem is when the users are executing the report at the same time it is taking too much time.because of this the perfoemance is very poor.
is there any way to sort out this issue,like can we send the report to the individual user's mail id
so that they can not log in to the portal
or can we create the same report on the cube.
what could be the main difference if the report made on the cube or ods?
please help me
thanks in advance
sridath

Hi
Try this to improve performance of query
Find the query Run-time
where to find the query Run-time ?
557870 'FAQ BW Query Performance'
130696 - Performance trace in BW
This info may be helpful.
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if useful
Cheers
SM

Aggregate check tool

Similar Messages

Maybe you are looking for