Aggregate is not working in the calc manager.

I have had a calculation working for months,all of a sudden it stopped working. It did not allocate and aggregate like it was suppose to. No changes have been made. I then changed the syntax and entered the account name using a cross dimensional operator and it started working again. Why would a calc which had been working suddenly stop working.
Calc Manager version 11.1.2

Thank u for your answer.
Yes, of course .. i�ve already apply the unique key validator for the entity.. so that custom error message is the error im trying to get in the application.
Other issue is when im trying to edit that error message: when im going to edit the message the previous error im entered is not there. Is it normal?

Similar Messages

My "update all" buton will not work in the app store. It gives me a message saying there is not enough storage to update.. I know i have storage left on the phone. I even bought more icloud storage. Any ideas??? Please help??? thanks

My update all button will not work in the app store. It keeps giving me a crazy message about not having enough storage to update apps. Please help? I know i have storgage on icloud and on the phone itself. Any ideas? Thanks

Try deleting the old backup.
Settings>iCloud>Storage & Backup>Manage Storage, tap the device name and on the resulting screen, scroll down and tap on Delete Backup.

Ralink RT5390 Does Not Work on the UEK Kernel

We installed OL6.3 and Ubuntu 12.04 on a new Asus X45A notebook. It has a Ralink RT5390 wireless card. With Ubuntu, both wifi and video work flawlessly. However, the wifi driver (from elrepo) does not work for the the uek kernel (2.6.39). While the wifi driver works when boot into the RHEL kernel (2.6.32), it created an "even bigger problem" in that the video starts at about 1/10 from the left edge of the screen.
As a result, we can only boot into Ubuntu on this new notebook, but we would like to use the uek kernel. Any suggestion will be appreciated.

Dude wrote:
It wouldn't surprise me if was more power efficient because half your hardware, e.g. wireless apparently isn't working ;-) I have three notebooks running OL6. Wireless works on all three of them. (One of the notebooks its wireless has problem with the UEK kernel, but no problem with the RHEL kernel.)
However, power management support means computer sleep and idle functions to slow down your computer's power
consumption when it is not needed, e.g. down clock your CPU and slow down your hardware, dim your screen, etc.
when running on battery, etc.This needs further verification, but all these functions seem to be working with OL6.
But again, please no one be fooled by my overly optimistic and simplistic comments*. The reality is, I am glad OL6 desktop works at all.
* For example, I actually installed OL6 on 4 notebooks, one of them "does not work" because I couldn't dim the screen. I did not intend to lie, but subconsciously, I somewhat forgot that there was this failed case.
Edited by: Ping-Wu on Dec 19, 2012 7:48 AM

HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.

HP Pavilion dv6-6181TX
Product No. A3U49PA
Genuine Windows 7 Home Premium 64
(but i upgraded it to windows 7 ultimate)
System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
so when i restart my computer and press Esc and then choose F11 i get this message :
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occured while attempting to read the boot configuration data."
i saw this from the forum
http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
Had the C partition been split/shrunk to form a new partition previously?
Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
please help me & Thank you for your time,
This question was solved.
View Solution.

If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
Older versions of Partiton Wizard Free work:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Hp TrueVision HD web cam does not work. The light will come on but no image appears in the window.

Hi.
I have an HP Pavilion dv7 6178us Entertainment PC I just bought it last week. My operating system is Windows 7 Home Premium Service Pack 1 64 bits.
The problem I have is that yesterday I install Skype in the computer and realized that the HP TrueVision HD web cam does not work. The light right next to the web cam will light up but no image will appear on the screen.
I have checked the software that I have in the computer for the webcam and the program is CyberLink YouCam BE version 3.5.
But the web cam does not work. The light right next to it will turn on when I activate Cyberlink, Skype or Messenger but no actual image will come out in computer screen. The computer is fully updated BIOS, Windows 7 and HP.
But the web cam is not working. Could you help me fix this problem?
Best regards:
JEIO71

I have a pavilion dv6 notepad. it's about a year old.
about a month ago internal webcam truevision hd stop working.
Called hp tech. they sent a box for me to ship the laptop.
they hp tech attempted to correct the problem via internet
did not work.
wanted me to do a restore to factory setting i stopped him there.
Webcam detected in device manager.
the webcam light come on but no image.
I actually see the back drop through the image space.
running windows 7, fully updated.
I found many comments on the web about the webcam connector disconnecting.
But if it was the case with my computer, the webcam would not be detected.
Many other comments suggests to do a restore to factory setting but \i read also that
does not work often.
I read many comments where disappointed clients believe hp should update
the software but the driver is actually microsoft dating back to june 2006.
Is it possible it's a hardware problem, ie webcam is burned out.
I have received a box to sent it and know they will do a system restore.
Don't feel to go that way.
Many comments refers to hp making an effort to get a driver update.
ps I decided to purchase a logitech webcam, works perfectly.
What else can I do to fix this problem.
Can hp send me another internal webcam.

Note 533276 - Setting the batch management requirement indicator

Hi;
we have found an oss note for setting the batch management requirement
indicator.. but the program mentioned in oss note does't exist in the
attachement part.. we urgently need your help..
how can we find program RVBCONVMAT2BM?
Note 533276 - Setting the batch management requirement indicator
Solution
Here, the standard procedure is to clear stocks of the current and the previous period as well as to complete the open documents. Note 30656 provides further information about this.
Alternatively, in the case of a large data or document volume, you can use a conversion report from the batch development that sets the batch management requirement indicator without the necessity of manual preliminary works such as the posting of the stocks or the completion of open documents.
We have developed the main features of this report, but it must be adjusted to individual business processes in a customer project that is subject to charges.
If you require further information about functions of this tool or about running such a customer project, you can send an e-mail to the consulting department ([email protected]).

Hi,
You also need to check for open sales order, open production orders, open WM transfer orders and open deliveries. These documents needs to be closed/completed.
Check OSS notes 533276 - Setting the batch management requirement indicator.
Following is the details of this notes;
Summary
Symptom
The attempt to set the batch management requirement indicator for a
material in the material master record maintenance fails because there are
stocks or documents that are not completed such as production orders, sales
orders, deliveries or WM transfer orders.
More Terms
MARA-XCHPF, MARC-XCHPF, RVBCONVMAT2BM
Cause and Prerequisites
Solution
Here, the standard procedure is to clear stocks of the current and the
previous period as well as to complete the open documents. Note 30656
provides further information about this.
Alternatively, in the case of a large data or document volume, you can use
a conversion report from the batch development that sets the batch
management requirement indicator without the necessity of manual
preliminary works such as the posting of the stocks or the completion of
open documents.
We have developed the main features of this report, but it must be adjusted
to individual business processes in a customer project that is subject to
charges.
If you require further information about functions of this tool or about
running such a customer project, you can send an e-mail to the consulting
department (BMToolsatsap.com).
Regards,

List of 3rd party hdds/ssds that do/do not work in the MacBook Pro

Hi everyone,
so after following the discussion(s) regarding the problems with hdds in the MacBook Pros after the firmware update I decided to start this thread with the hope that we can create a list of hdds/sdds that do or do not work in the MacBook Pros.
So here's my contribution (and a little convention for the posts):
model: MacBook Pro (Mid 2009) 2.8 GHz
firmware: EFI 1.7
drive: OCZ 128GB SSD with firmware 1.30
result: did not work
I could not partition/format the drive using the disk utility during the Mac OS X installation process. I managed to get the drive partitioned and formated using a SATA to USB cable from within Mac OS X and the original hard drive installed. In the end I wasn't able to install Mac OS X on it though (installer hang and gave an unknown error). So I returned the drive and got a refund.
PS: The drive worked fine in my PC so it may be a MacBook Pro SATA-controller related issue.
Please note beachball phenomenon in your posts as well.
Cheers,
roofkid

Hi,
the superior ssd from corsair (cmfssd-256gbg2d) is unusable in a late 2008 macbookpro (5,1).
mcp79 is such a crappy chipset. i hope apple drops nvidia for the nextgen mbp.
cheers
picea

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host>

Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

My work computer runs Outlook 2003, which I know will not work with the iCloud, so I hard sync. But then the new info on my iPhone does not backup to iCloud. Is there a solution?

I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?

I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!

HT204187 Email account does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

You don't input the information in manually for iCloud mail. It is automatically set up for you when you sign into iCloud via System Preferences and choose the Mail checkbox. Sign out of iCloud or deselect Mail in iCloud preferences. Open Mail's preferences and choose accounts tab. If iCloud account still exists in the list, delete it. Sign back into iCloud or check the box for mail. The account will be auto created for you.

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

Aggregate is not working in the calc manager.

Similar Messages

Maybe you are looking for