Aggregate switched off and deactivate

hi guys,
1. what is the difference between the aggregate switch off and aggrgate deactivate?.
2. If I have more than one aggrgate and one of them is switched off what happens when roll up is done?
3. for the same scenario what happens to roll up if i have one deactivated aggregate.
4. Is reporting possible for switched off aggrates.
Thanks in advance
Ramesh

Hi
1. what is the difference between the aggregate switch off and aggrgate deactivate?.
If u switch off the aggregates it wont be identified by the OLAP processor. report will fetch the data directly from the cube. And the aggregates and the data remain the same.
If u deactivate the aggregates the data will be deleted from the aggregates and the aggregate structure will remain the same.
2. If I have more than one aggrgate and one of them is switched off what happens when roll up is done?
The data will be loaded to switched off aggregates also.
3. for the same scenario what happens to roll up if i have one deactivated aggregate.
The data will not be loaded to the aggregates. you have to do the initial fill by activcating the aggregates. Its like a init load.
4. Is reporting possible for switched off aggrates.
No reporting is not possible on swtiched off aggregates.
Assign points if it helps
Khaja

Similar Messages

Difference between Switch -off and disable of an aggregate.

Hi All,
Can any one please tell me whats the difference between Switch-off and Disable an aggregate?
Appreciate ur help.
Thanks,
Soumya.

Hi,
You can temporarily switch off an aggregate to check if you need to use it. An aggregate that is switched off is not used when a query is executed.
To do this select the relevant aggregate and choose This graphic is explained in the accompanying text Switch On/Off. An aggregate that is switched off is marked in column Filled/Switched off with This graphic is explained in the accompanying text.
Since aggregates that are switched off must also be consistent, you do not have to activate the aggregate again or to fill it when you switch it back on.
Execute a query or trace that would use the aggregate that was switched off. Compare the time that the database needs with the time that the query needs when using the aggregate. If the query is not significantly slower without the aggregate, you can deactivate or delete the aggregate.
The system deletes all the data and database tables of an aggregate. The definition of the aggregate is not deleted.
Deactivation
Select the required aggregate and choose This graphic is explained in the accompanying text Deactivate.
The status display in the columns Status and Filled/switched off change back to This graphic is explained in the accompanying text.
If you want to, you can activate and fill the aggregate again later.
More information:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
Hope it helps.
Regards,
Ray

My ipod touch will not switch on and is no longer recognised by itunes. Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.

My ipod touch will not switch on and is no longer recognized by itunes. Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.
I tried to restore it and I got error code 2009, so I closed it tried again got error code 1659, now it wont do anything and it's not recognized by my pc /itunes please help x

For the restore error messages try:
iTunes: Specific update-and-restore error messages and advanced troubleshooting

My Iphone 4 only charges when is switched off and it's not recognized by Itunes and Mac

Hello guys!! Please help me if someone knows what should I do. My iphone was working perfectly so far but a couple of days ago it stopped charging, its not charging neither with the a/c adapter and with the usb through my pc. It says device not recognized.. Today I had my iphone switched off and tried to see if it was charging and actually it was! But it didn't show that it was actually charging (the battery icon with the bolt didnt appear..but after 3 hours it was fully charged..but this happens only when its switched off..so i cant connect on itunes and i cant charge it while its turned on!! If someone knows please help!!!!!
I tried different cables and different computers and nothing. I can't restore because it's no recognized...
Thanks a lot!!

Hi, my iphone 4 was working fine a couple of days ago, but suddenly i plugged the device to my laptop and after a while i realized it wasnt charging, i have tested on a lot of computers but i got the same issue, even on a mac but its not detected.
So finally i turned off and after a while i realized the phone was fully charged, at least i found a temporary solution to this problem but its really anoying to switch off to charge the phoen, if you solve this problem please let us know, apple should fix this problem.
As you can see there is no charging logo when the phone is connected

Need to switch off and on my apple tv v2 each time I want to connect my PC under vista

Hello
need to switch off and on my apple tv v2 each timeI I want to connect my PC under vista.
After that, everything is going well...
But it is not the best user experience ;-)
Any idea if this can be fixed ?
My PC is under Vista...
Thanks a lot

I'm having the same problem. It seems to have started after the most recent firmware upgrade. Does anybody know if Apple is looking into this? It's rather irritating to have to reboot the Apple Tv every time I want to use it!

My iphone switched off and when I turn it back on it wants to connect to itunes

My iphone switched off and when I turn it back on it wants to connect to itunes
I was taing photo's and battery was half full - I switched it off and when I turned it on it says connect to itunes. I am not near my laptop?! What can I do

That is referred to recovery mode. At this point your only option is to restore to factory & then from a backup if you have one

Please help me my iphone 4 switch off and not working

please help me my iphone switch off and not working

Hello safaabh,
I would be concerned too if my iPhone would not power on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

While erasing memories from iPhone 4, the phone gets switched off and can't turn on back

while erasing memories from iPhone 4, the phone gets switched off and can't turn on back. Please help.

What exactly do you mean by "erasing memories"?

My iPhone 4 suddenly switch off and blank off..what should I do?

My iphone4 suddenly switch off and blank off..what should I do??

Connect to Wall Charger as smanhire says to do. Leave it on charger for at least 10 minutes, it may turn ON as smanhire says. If still OFF, keep on charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds of holding both buttons while on charger. If still nothing, and there is Warrany or AppleCare take iPhone to Apple for resolution.

My phone suddly switched off and now its not switching on can any one help me when it swithch off my phone battery was full.

my phone suddly switched off and now its not switching on can any one help me when it swithch off my phone battery was full.

Which apps do you open acouse iphone switched off? You can try to reset iPhone.

"the type of printhead is incorrect" notice- switch off and unplug 5 mins- still got problem

"the type of printhead is incorrect" notice- went through switch off and unplug for 5+ mins-then switch on and retry still got problem

of the debug h245 send this:
*Mar 25 22:17:46.327: //-1/208AA82F8057/CCAPI/cc_api_call_setup_ind_common:
Sub Calling(TON=National, NPI=Unknown, Data=(, Length=34)
*Mar 25 22:17:46.327: //-1/208AA82F8057/CCAPI/cc_api_call_setup_ind_common:
Sub Called(TON=Unknown, NPI=Data, DatAP"'(AP<3, Length=3)cch323_ip_best_local_address: IP 192.168.18.1 found for bound IDB GigabitEthernet0/1.16term mon
and the debug h225 send this:
*Mar 25 22:21:32.875: //-1/A79321E4806C/CCAPI/cc_api_call_setup_ind_common:
Sub Calling(TON=National, NPI=Unknown, Data=(, Length=34)
*Mar 25 22:21:32.875: //-1/A79321E4806C/CCAPI/cc_api_call_setup_ind_common:
Sub Called(TON=Unknown, NPI=Data, DatAP"'(AP<3, Length=3)cch323_ip_best_local_address: IP 192.168.18.1 found for bound IDB GigabitEthernet0/1.16
so, i change the h323 of subinterface, it was before the subinterface 0/1.11 and now is on 0/1.16

My iphone 5c switched off and does not want to switch back on?

Hi all,
I need some help please... my phine switched off and does not want to switch on.
I have charged it on my computer for at least an hour yet there has been no luck. It is only about 3 months old.
Regards
Nakkie

Thank you Razmee209,
This solved my question, I tried it earlier but I guess I did not hold it in long enough.
Thank you so much.
Regards
Nakkie

HT1414 My iPhone5 got a problem of getting automatically switched off and then automatically switched on. First i can see my screen getting faded to pinkinsh sort of color and then showing vertical grid lines. any suggestions?

My iphone5 got a problem of getting switched off and on automatically. I can see my screen getting faded and then i can see the pink vertical lines before it switches off. After about 10 seconds it switches on again.

Hi sumit1310,
Thanks for visiting Apple Support Communities.
I'd start with these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Regards,
Jeremy

Word documents have disappeared from my desk top (macbook air) and cannot be found anywhere, happened after switching off and re-bootingk

Saved word documents have dissappeared from the desk top after saving. Problem seems to occur when laptop is switched off and then re-started. they can't be found anywhere e.g tried spotlight, recent documents etc. Help. Joe

First, you might as well address the two apparently-minor issues you found:
Some info on the Epson Scanner Monitor (via searching these forums):
http://discussions.apple.com/thread.jspa?messageID=8272208&#8272208
Not sure about the MS Word message, but it looks like you might need an upgrade. I'd check with Microsoft, or perhaps VersionTracker.com.
Ok, back to the original problem. Does the message have any other text (intelligible or not)?
Does it give you any options, especially "report"? If so, take it, then look via Console for a crash log.
What IS in the system log for the sleep/wake time? There should be a System Sleep, followed by a System Wake, and perhaps another line or two. Anything in that area might be helpful.

My itouch 4th gen refuses to switch off and i am unable to change the volume. Can you help?

my itouch 4th gen refuses to switch off and i am unable to change the volume. Can you help?

- Have you tried resetting the iPOd:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next connec the iPod to its syncing computer and try to restore the iPod.
- The if still same. place the iPod in recovery mode and then try to restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Aggregate switched off and deactivate

Similar Messages

Maybe you are looking for