Aggregates...How to find out for a query..Any TC??
Hi friends,
How to find out whether the query is using aggregates or not, which are built on its base cube. Is there any TCode for it to know?. Without going to Infocube maintenance tab, can we know whether queries use aggegates???
Thanks
Murthy
Go to RSRT transcation in bw
there u select the query on cube where u created an aggergates click Execute+debug(you vl be presented with select"show aggregates used"also check Nochache now click the tickmark.
It vl show you how many aggegates are there for the cubes and how many aggegates are used for the particular query used .Go to table RSDDSTAT this shows every navigational step for a query and vch aggregates it used.
thanks
Prasanth Reddy
Similar Messages
-
In DBI , how to find out the Source Query used for the Report
Hi All,
How to find out the Source Query used to display the data in the DBI Reports or Dashboards. We can get it in Apps Front end by Going to Help and Record Histroty. But DBI Runs in Internet Explorer so i dont know how to get the source query ( SELECT Query ) Used.
In IE we have View --> Source . But that does not help since it gives the HTML Coding and not the SELECT Query used.
If anyone has ever worked on it...Please help me in finding it.
Thanks,
Neeraj ShrivastavaHi neeraj,
You can see the query used to display reports.Follow these steps to get the query.
1)Login to oracle apps
2)Select "Daily Business Intelligence Administrator" responsiblity.
3)Now click on "Enable/Disable Debugging" (Now u enabled debugging)
4)now open the report which you want to see the query of
5)In view source it displays query along with the bind varilables.
Feel free to ping me if you have any doubts
thanks
kittu -
How to find out which sub query returns more than one row
Hi all,
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .
/* Formatted on 2011/05/17 19:22 (Formatter Plus v4.8.8) */
SELECT a.*, ROWNUM AS rnm
FROM (SELECT DISTINCT '1' AS "Page View", ou.org_unit_name AS "Org",
prxm.mbr_idntfr AS "Beneficiary ID",
md.last_name
|| ', '
|| md.first_name AS "Beneficiary Name",
pci.idntfr AS "Tracking No.",
TO_CHAR (TRUNC (req.pa_rqst_date),
'MM/dd/yyyy'
) AS "Request Date",
sts.status_name AS "Status",
req.pa_rqst_sid AS "Request #",
prxm.mbr_sid AS "Mbr_sid",
TO_CHAR
(TRUNC (req.pa_revision_date),
'MM/dd/yyyy'
) AS "Last Updated",
TO_CHAR (psd.TO_DATE, 'MM/dd/yyyy') AS "TO_DATE",
prxpl.prvdr_lctn_iid AS "PRVDR_LCTN_IID",
pd.prvdr_sid AS "PRVDR_SID", 'Y' AS "State View",
DECODE
((SELECT DISTINCT pd.national_prvdr_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid =
req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
0, (SELECT prxplo.prvdr_lctn_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
NULL, (SELECT prxplo.prvdr_lctn_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
(SELECT DISTINCT pd.national_prvdr_idntfr
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid =
req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR')
) AS "NPI/ID",
DECODE
((SELECT pd.org_bsns_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
NULL, (SELECT pd.last_name
|| ', '
|| pd.first_name
|| ' '
|| pd.middle_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR'),
(SELECT pd.org_bsns_name
FROM pa_request_x_provider_location prxplo
WHERE prxplo.pa_rqst_sid = req.pa_rqst_sid
AND prxplo.oprtnl_flag = 'A'
AND prxplo.pa_prvdr_type_lkpcd = 'RR')
) AS "Prvdr Name",
TO_CHAR (psd.from_date,
'MM/dd/yyyy'
) AS "Srvc From Date",
TO_CHAR (req.validity_start_date,
'MM/DD/YYYY'
) AS "Due Date",
(fn_get_busniess_days (TRUNC (req.validity_start_date))
) AS "Days<br>Left",
req.pa_mode_type_lkpcd AS "Source",
TO_CHAR (TRUNC (wmdtl.rtng_date),
'MM/dd/yyyy'
) AS "Assigned On",
NVL (wmdtl.assigned_to_user_name,
'Not Assigned'
) AS "Assigned To",
req.org_unit_sid AS "OrgUnitSid",
TO_CHAR
(wmdtl.modified_date,
'MM/dd/yyyy hh24:mi:ss'
) AS "WTRD_MODIFIED_DATE",
TO_CHAR (wmdtl.rtng_date,
'MM/dd/yyyy'
) AS "WTRD_RTNG_DATE",
req.status_cid AS "PA_STATUS_CID",
TO_CHAR (req.modified_date,
'MM/dd/yyyy'
) AS "PA_REQ_MODIFIED_DATE",
prs.state_pa_srvc_type_code
AS "STATE_PA_SRVC_TYPE_CODE",
wmdtl.wm_pa_task_rtng_dtl_sid
AS "WM_TASK_RTNG_DTL_SID",
wmdtl.assigned_to_user_acct_sid
AS "WTRD_Assigned_to_user_acct_sid",
(fn_get_busniess_days (TRUNC (req.validity_start_date))
) AS "Days<br>LeftSort",
wmdtl.assigned_to_org_unit_sid
AS "WTRD_Assigned_to_OrgUntSid",
DECODE
((SELECT COUNT (*)
FROM pa_request_status prs
WHERE prs.pa_rqst_sid = req.pa_rqst_sid
AND prs.status_cid = 5
AND prs.oprtnl_flag = 'I'),
0, 'N',
'Y'
) AS "SHOW_UTILIZATION"
FROM pa_request req,
pa_certification_identifier pci,
status sts,
pa_request_x_member prxm,
wm_pa_task_routing_detail wmdtl,
pa_service_date psd,
org_unit ou,
pa_request_service prs,
pa_request_x_provider_location prxpl,
provider_location pl,
provider_detail pd,
provider p,
mbr_dmgrphc md
WHERE req.oprtnl_flag = 'A'
AND req.status_cid NOT IN
(20, 30, 70, 25, 80, 96, 85, 5, 97, 98, 101)
AND req.org_unit_sid IN
(3057, 3142, 3058, 3143, 3059, 3144, 3060, 3145,
3061, 3146, 3062, 3147, 3063, 3148, 3064, 3149,
3065, 3150, 3066, 3151, 3067, 3152, 3068, 3153,
3069, 3154, 3070, 3155, 3071, 3156, 3072, 3157,
3073, 3158, 3074, 3159, 3075, 3160, 3076, 3161,
3077, 3162, 3078, 3163, 3079, 3164, 3080, 3165,
3081, 3166, 3082, 3167, 3083, 3168, 3084, 3169,
3085, 3170, 3086, 3171, 3087, 3172, 3088, 3173,
3089, 3174, 3090, 3175, 3091, 3176, 3092, 3177,
3093, 3178, 3094, 3179, 3095, 3180, 3096, 3181,
3097, 3182, 3098, 3183, 3099, 3184, 3100, 3185,
3101, 3186, 3102, 3187, 3103, 3003, 75000104,
75000108, 2006, 75000103, 75000102, 75000113,
75000111, 75000109, 2001, 2009, 75000105,
75000107, 2004, 2010, 2013, 2014, 2005, 2011,
75000112, 2002, 1001, 2012, 75000106, 2007,
75000101, 2003, 75000110, 2008, 3001, 3002, 3019,
3104, 3020, 3105, 3021, 3106, 3022, 3107, 3023,
3108, 3024, 3109, 3025, 3110, 3026, 3111, 3027,
3112, 3028, 3113, 3029, 3114, 3030, 3115, 3031,
3116, 3032, 3117, 3033, 3118, 3034, 3119, 3035,
3120, 3036, 3121, 3037, 3122, 3038, 3123, 3039,
3124, 3040, 3125, 3041, 3126, 3042, 3127, 3043,
3128, 3044, 3129, 3045, 3130, 3046, 3131, 3047,
3132, 3048, 3133, 3049, 3134, 3050, 3135, 3051,
3136, 3052, 3137, 3053, 3138, 3054, 3139, 3055,
3140, 3056, 3141)
AND req.pa_rqst_sid = prs.pa_rqst_sid
AND prs.oprtnl_flag = 'A'
AND prs.pa_rqst_srvc_sid = psd.pa_rqst_srvc_sid
AND psd.oprtnl_flag = 'A'
AND req.pa_rqst_sid = pci.pa_rqst_sid
AND pci.oprtnl_flag = 'A'
AND req.pa_rqst_sid = prxm.pa_rqst_sid
AND prxm.oprtnl_flag = 'A'
AND md.oprtnl_flag = 'A'
AND md.status_cid = 2
AND TRUNC (SYSDATE) BETWEEN md.from_date AND md.TO_DATE
AND prxm.mbr_sid = md.mbr_sid
AND ou.org_unit_sid = req.org_unit_sid
AND ou.oprtnl_flag = 'A'
AND req.pa_rqst_sid = prxpl.pa_rqst_sid
AND prxm.pa_rqst_sid = prxpl.pa_rqst_sid
AND pci.pa_rqst_sid = prxm.pa_rqst_sid
AND pci.pa_rqst_sid = wmdtl.subsystem_task_sid
AND pci.pa_rqst_sid = prxpl.pa_rqst_sid
AND prxpl.pa_prvdr_type_lkpcd = 'RR'
AND prxpl.oprtnl_flag = 'A'
AND req.status_cid = sts.status_cid
AND sts.status_type_cid = 3
AND sts.oprtnl_flag = 'A'
AND prxpl.prvdr_lctn_iid = pl.prvdr_lctn_iid
AND p.prvdr_sid = pd.prvdr_sid
AND p.prvdr_sid = pl.prvdr_sid
AND pd.oprtnl_flag = 'A'
AND pd.status_cid = 2
AND TRUNC (SYSDATE) BETWEEN pd.from_date AND pd.TO_DATE
AND wmdtl.subsystem_task_sid = req.pa_rqst_sid
AND wmdtl.subsystem_lkpcd = 'PA'
AND wmdtl.oprtnl_flag = 'A'
AND req.pa_rqst_date > (SYSDATE - 365)
ORDER BY TO_DATE ("Request Date", 'MM/dd/yyyy hh24:mi:ss') DESC,
"Beneficiary Name" ASC) a
WHERE ROWNUM < 102;regards,
P Prakash
Edited by: BluShadow on 17-May-2011 15:01
added {noformat}{noformat} tags around the code833560 wrote:
Can any one give me clue ,how to find out which sub query returns more than one row in the following query .This is why smaller, simpler queries are easier to work with than huge ones - when something like this goes wrong smaller queries are much eaiser to debug. Unfortunately using smaller, easier-to-work with queries is not always an option
Ganesh is right - you will have to dissect the big query bit by bit until you find the offending subquery. If there is another way I would like to find out about it too.
The easiest way to do this is probably to use block comments to isolate parts of the query bit by bit until you find the offending part. If you carefully examine the subqueries you might be able to figure out which one is returning multiple rows without commenting everything
Good luck! -
Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?
This functionality is not available in LabVIEW RT. If you attempt to switch execution target to an RT controller already targetted by someone else, it will tell you too many hosts are connected and fail. Of course if it allows you to switch, then no one was connected. By attempting to switch execution target you can use the message above to determine if anyone is targetted or not, but if someone is, there is no way to determine who.
If you are concerned about this sort of thing, you might check the RT target options in LabVIEW RT to change the IP access list for hosts that are allowed to switch execution target to it. -
How to find out if a query(report) has a role.
I want to find out if a query(report) has a role and what the role name is.
Do anybody know a function or a table?goto SU01 , give ur username , click on roles tab , and click F1 on role field , then goto technical attributes , and use where-used-list of that dataelement , u will lot of tables on Roles and its attributes
You can look up AGR* tables in SE16
Please give me reward points if it is useful.
Thanks
Murali Poli -
How to find GENUNIID for a query/report
Hello All,
I have a report/query and i need to find GENUNIID. Please provide me the table name. There is one table RSRREPDIR but i am not able to find out the report name/query name out of this. Please help me.
Thanks,
Rathy.Chek this FM RRI5_GENUNIID_FROM_COMPUID_GET.
For compuid , check RSZELTDIR , give query name in MAPNAME fileld , corresponding ELTUID is the compuid to be given in above FM
Edited by: Neetika Sharma on Jun 3, 2010 8:30 AM -
How to find out where a query is used in a FMS and or Form?
Hi Experts,
How can I find out quickly where a query is used in which fms and / or form?
thx,
RichardHi Richard,
Try this:
SELECT T2.FormID, T2.ItemID, T2.ColID,
T1.CatName,T0.Qname FROM [dbo].[OUQR] T0
INNER JOIN [dbo].[OQCN] T1 ON T0.QCategory = T1.CategoryId
INNER JOIN [dbo].[CSHS] T2 ON T2.QueryId = T0.IntrnalKey
ORDER BY T2.FormID
Thanks,
Gordon -
How to find out if your query uses the indexes?
How can one tell if the query being issued is using your indexes or doing full table scans?
Thank you.Thank you.
Ok, let me see if I understand it. So, having an
index may not speed things up.True
Full table scans are not bad at all -- as I have it
in my head. The query I ran before was: select *
from table1;In that case an index would only slow things down; you are asking it to get all the information from the table - it has to read all of the table ( a full scan).
>
So full table scans and index have to do with the db
block size and the size of the row correct?
Block size and row size don't have a huge amount to do with it, but they do play a role.
Let me ask: How does one know the size of a row and
then the best option for the db blocks? Block size is a global setting (at the tablespace level I think). You would not likely change the block size based on the average row length in any one table. It would be about the last thing you might look at in terms of tuning (though you might consider it up-front if you had a huge amount of very predictable data).
>
And if, I create indexes and queries have the where
clause and the database uses full table scans then
does it means that either:
The database believes that the best execution plan is
to either do FULL SCANS OR USE INDEXES -- ALL UPTO
THE DATABASE?
No. There is another piece of information that the database needs to make good decisions. If for example you have a WHERE clause "WHERE not_paid = 1" and you have an index on not_paid. To make a good decision the database needs to know about how many of the rows are likely to be not_paid =1. If it's 90% then a full table scan will be cheaper than looking up the addresses of 90% of the rows and then getting the data. If it's 10% using the index will be cheaper. You need to use Analyze Tables to get the database to store this information. Looks like you need to use a bit of time with the manuals.
Jon
-J -
How to find out in which query same restriction on keyfigure is used
Dear all,
is there a way to find out in which queries the same restriction for keyfigure structure is used?
-> e.g. show me all queries that contains restriction on 0TCTIFPROV = cube AAA??
Unfortunately the keyfigures in the queries don't have technical names, as basic keyfigures are used and only restricted to a cube!
Thanks for feedbackHi;
I think you cannot have this information but your can have in metadata repository (Transaction RSA1)
all the queries linked to your infoobject OTCTIFPROV.
It could be an other solution for you.
Regards. -
i want to know one thing how the name for the report is made.
Transaction code ZPNL_TESTDEMO
Package ZDEV
Transaction text FGI3 P&L REPORT
Transaction START_REPORT
D_SREPOVARI-REPORTTYPE = RE
D_SREPOVARI-REPORT
D_SREPOVARI-EXTDREPORT
D_SREPOVARI-VARIANT
D_SREPOVARI-NOSELSCRN
D_BACKGROUND_EXEC
D_SREPOVARI-EXTDREPORT =
FBRG01FAGLFLEXS ZTESTDEMO.
the question is how to determine the name of the the report to call i.e (FBRG01FAGLFLEXS ZTESTDEMO)
this is made in parameter transaction in se93.sorry to say about the query.....actually the report is made in report painter.
and i am able to see it in fgi3.....
but the issue is how can i make the transaction that can run that report directly.
regards
saurabh -
How to find out to which query the query-elements in a transport belong?
Hi specialists,
the topic should already say everything.
I've got a changeable transport-request with several query-elements in it.
But I haven't any idea to which query this elements belong. Where do I need to look-up that information?The excat table is not known to me..try finding in the following tables:
RSZCALC
RSZCEL
RSZCHANGES
RSZCOMPDIR
RSZCOMPIC
RSZCONTROLTEXTS
RSZELTATTR
RSZELTDIR
RSZELTPRIO
RSZELTPROP
RSZELTTXT
RSZELTTXT_MULTI
RSZELTXREF
RSZGLOBV
RSZIELPICMON
RSZOPRATOR
RSZOPRATXT
Thanks..
Shambhu -
How to find out the query hits an aggregate or not
Hi Experts,
Can anyone please tell me how to find out whether a Query is hitting the aggregates or not.
Thank you
KRHi,
Go to RSRT t.code and give your query name , execute with debug mode , an pop screen will come there you enable the flag for Display aggregate found and select aggregate.
It will show you which aggregate has been used for that report.
Regards,
Siva. -
How to Find Out whether Standard IDOC is Availabl for Transaction ?
Hi,
We are having SAP implementation 4.7E IS-OIL. We would like to know how to find out whether is there any Standard IDOC is Available for the SAP Transaction.
Particularly for IS-Oil related transaction. e.g Load Confiramtion. T-code - O4G1.
From a Given Transaction code is there any link which can tell whether IDOC is Present or not.
Kindly help me.
Regards,
Umeshcheck for transaction....we41 and we42..
check for proper process code...then check in we57,we81 and we82..
also u can search in google..
UMESH note that u need some fucntional exp for working in IDOC...try to crack yr head ..give time..n u ll get to know the things soon..as there is no defined standards to work in idocs..
for more info u can ask me for [email protected]
best regards
Message was edited by:
Madan Gopal Sharma -
How to find out user exits of t-code va03
hi all
how to find out user exits of any t-code .
regards
deepakHi Deepak,
<b>Try this code.</b>
*& Report Z_USEREXIT *
REPORT Z_USEREXIT
NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
<b>plz reward points if helpful or if it solves ur query.</b>
Thanks
Chinmay -
How to find out whether Oracle database was upgraded ??
Hi,
I need to find out whether my Oracle database was upgraded, If yes how to find out by SQL query .I know their is database_properties table, but when I try to query that it didnt gave me the output which I required.
Like in SAP we have uvers table which keep info about the upgrade history, whether such history is avaliable in oracle ?? . Iam looking out for output which is like old database Release 9.2.0.7 and new database release 10.2.0.2.
Whether similar such history is maintained in Oracle database.
Awaiting for your feedback.
Kind Regards
NeenadHi all,
After checking all the material,I dont think prior to 10g, oracle register its earlier version.
The views of v$version show the current version for various components and also dba_registry displays info about catlog/catproc versions.
In 10g, you can use the following query to know the version when the database was broughtup.
select startup_time,version,db_name from dba_hist_database_instance.
Anways thanks to all of you.
Kind Regards
Neenad
Maybe you are looking for
-
Sales order qty not confirmed when delivery done with partial qty
Hi Guru's Need your help............ We have issue in drop shipment scenario process. Sales order created with 10 line items from CRM and order released from CRM and replicated order to ECC and backend created PR also. After that user set reject stat
-
I have a trouble, with lion my finder doesn't work, i can't open any window
i have a trouble, with lion my finder doesn't work, i can't open any window
-
How to get the Price variance report for PO's?
Hi all, Please help me by giving the exact T Code which gives the price variance for the PO's,which must be showing the difference between the GR value and the price(std.price) maintained in the material master. Waiting for your suggestions. Regards
-
Erratic behaviour of 'all day events'
I use iCal very successfully for recording campsite bookings. It's only a small campsite - never more than ten pitches at a time, so at best I have 10 'all day events' spread across a week view (as discussed in this forum, month view is no use for vi
-
Can't we do augmented reality with StageVideo and Stage3D ?
Hi, I just read the Stage3D documentation and found that : "StageVideo and Stage3D are rendered with no transparency." It means we will not be able to create augmented apps using these two features ? Is there any chance the finale FP11 realease will