Aggregates on CRM and WM Cubes

Hello Everyone,
Is there anything special about creating aggreates on a CRM cube or WM Cube (with non-*** key figures)?
Meaning anything that will not work or to keep in mind?
Thank you.

Hi ,
Check these links
CRM
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm</a>
PP Related
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/6f/5d953fc405330ee10000000a114084/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/6f/5d953fc405330ee10000000a114084/frameset.htm</a>
Thanks & Regards
Renjith Kumar
( Assign Points if helpful)

Similar Messages

CRM Sales and ECC Delivery and Billing cube ods info

We have already activated the ODS( OCRM_SALO) and the cube(OCSAL_CO3) for the sales order item level info and loaded data from the CRM system.
Our next aim is to load the delivery and Billing data from the ECC( or ERP). This is where we are a little confused.
We see a lot of ODS in the info area CRM> ERP Analytics> Sales and Distribution Analysis SAP R/3 SD
Not sure which ODS object and Cubes to activate and load.
Any help will be rewarded.
Thanks
Arun

Hello,
You can use BADI CRM_DATAEXCHG_BADI method crm_dataexch_after_bapi_fill.
In this method the field REQ_DLV_BL in internal table ct_bapischdlx can be cleared when CRM sends a delivery block with value space. When this field is cleared this means for ERP: Do not takeover delivery block and run the logic to determine the delivery block (including from material status).
Please bear in mind that this will lead to a system behaviour that a value of space for delivery block cannot be transferred anymore from CRM to ERP. This means the delivery block cannot be reset anymore from the CRM side, it can only be removed in ERP. If you use data exchange scenario A, it should not be a problem for you as the sales order can also be changed in ERP and thus the delivery block can be removed in ERP.
Best regards,
Maggie

Doubt in CRM sales order Cube and ODS

Hell Friends,
We have a standard cube '0CSAL_C03' and ODS '0CRM_SALO' for CRM sales order.
ODS is attached with infosurce(datasource) -0CRM_SALES_ORDER_I and 80CRM_SAL2(this is update rules-another sales order items(lean extraction) ODS - 0CRM_SAL2).
we have another ods(lean extraction)- 0CRM_SAL2 and again it is attached with 0CRM_SALES_ORDER_I.
Could anybody explain me why two ods ar coming for sales order- crm.
Can we use two ods or only one ods-0CRM_SALO?
Could you pls. check it the system under- crm application component and let me know what is the best way for going impls.
Thanks,
Mahantesh

Hi!
actually they definatly use Bdocs because messages bdocs are the main communication elements in CRM. you will definatly find them in SBDM. Bdoc are simmilar idoc's they used to send information between CRM transactions and ERP systems, mobile clients or to BW. there are 2 types of Bdocs message bdocs(M Bdocs) and synchronization Bdocs (S Bdocs). Sbdocs are used for sycronizing between moblie clients and CRM online. M bdocs are used for communication within CRM and also for exachange information between R/3 and CRM as well.
So for sales we normally configure our standard Bdocs or we can modell our own bdocs. lean Bdocs are message bdocs but have only subset of all the fields in a transaction and used for updating only those fields. usage of them can be verified only CRM specialists. it depends on how your organizational sales process is configured in CRM.
in SALES we normally use bdoc BUS_TRANSACTION_MESSAGE this is used for most of the transactions in CRM. so you got to confirm from your team if they are using any other bdocs for slaes additional to the above mentioned.
with regards
ashwin

Reconcilation of Customer and Vendor from CRM and SRM to 0bpartner in BI

Hi,
I am having customer master data and vendor master data in ECC both represents the same numbers .Ex: 10001 - customer1 and 10001 - vendor1.
I am sending this data from ECC system to CRM and SRM system and again Iam loading this data into 0BPARTNER Infoobject in BW from CRM and SRM systems.
In BW it is messing up, when i do a report on CRM cube it show me the vendor descriptions where i supposed to see customer descriptions .
I can't change the ECC customer and vendor numbers since i need to change all other legacy systems depending on this .
Can any one tell me how to fix this problem and your help is truly appreciated.
Thanks,
Ramkumar

Hi,
Please check following links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f33e12-aeac-2a10-2186-ed8301f778ba?overridelayout=t…
Cross company-code invoice posting and configuration - ERP Financials - SCN Wiki
Regards,
Tejas

Aggregate switched off and deactivate

hi guys,
1. what is the difference between the aggregate switch off and aggrgate deactivate?.
2. If I have more than one aggrgate and one of them is switched off what happens when roll up is done?
3. for the same scenario what happens to roll up if i have one deactivated aggregate.
4. Is reporting possible for switched off aggrates.
Thanks in advance
Ramesh

Hi
1. what is the difference between the aggregate switch off and aggrgate deactivate?.
If u switch off the aggregates it wont be identified by the OLAP processor. report will fetch the data directly from the cube. And the aggregates and the data remain the same.
If u deactivate the aggregates the data will be deleted from the aggregates and the aggregate structure will remain the same.
2. If I have more than one aggrgate and one of them is switched off what happens when roll up is done?
The data will be loaded to switched off aggregates also.
3. for the same scenario what happens to roll up if i have one deactivated aggregate.
The data will not be loaded to the aggregates. you have to do the initial fill by activcating the aggregates. Its like a init load.
4. Is reporting possible for switched off aggrates.
No reporting is not possible on swtiched off aggregates.
Assign points if it helps
Khaja

ODS objects and Info-cubes

Could someone clarify my understanding of the difference between ODS and basic cubes?
My understanding is that the ODS is updated from R/3 and is a flat structure, or a basic database which is write-optimised. The data in the ODS is then updated into the info-cube at a more summarised level.
The info-cube provides enhanced reporting capability because it is structured as a star-schema which introduces additional dimenions (via the dimension tables) to enrich the contents of the fact table.
Does the ODS update both fact table and dimension table in the star schema?
Many thanks,
Frederick

Hi Frederick,
If that doesn't solve your concern... then go ahead
1.ODS is a two dimensional object
2.ODS is a datastore where you can store data at a very granular level.
3.Technically there is the option to overwrite or add single records.
4.ODS can be used for detailed level of reporting( same as in r/3),
(cube can be used for aggregate level of reporting.)
5.ODS are used to consolidate data
1.Whereas cube is a based on multidimensional modeling which facilitates reporting on diff dimensions.
2.The data is stored in an aggregated form unlike ODS and have no overwriting capability.
3. Reporting and analysis can be done on multidimensions unlike on ODS
4. InfoCubes are optimized for reporting
5. There are options to improve performance like aggregates and compression.
5. It is not possible to replace single records, all records sent to InfoCube will be added up.
You may get a doubt why first load to ODS and then to Infocube, the strategy of adding ODS
in dataflow is termed as addtion of EDW(Enterprise Datawarehouse) layer which will allow
us to retrieve data within BW if at all some thing goes wrong & we lose data from InfoCube.
We can get the data from ODS itselft into cube without going to the source sytem again.
Please search SDN & you will get a lot of docs on this:
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=infocubeODSdifferences&adv=false&sortby=cm_rnd_rankvalue
Re: ods vs infocube
ODS and Infocube..
Difference between InfoCube and ODS Object
ODS and Cube
use of ODS
Cheers,
Habeeb

In CRM Activity item cube 0CRM_C08

Hi experts,
The above mentioned cube is not having the Product details and Transaction number or Activity guid which are available in the DSO which is supplying data to it and its getting data from the Datasource Activity items.
Is their any specific reason why that is not being included in the infocube
Actually we have only one product for one activity only that is fixed so in this scenario can i bring this product item data directly in the Activity cube.
Thanks and regards

Hi!
actually they definatly use Bdocs because messages bdocs are the main communication elements in CRM. you will definatly find them in SBDM. Bdoc are simmilar idoc's they used to send information between CRM transactions and ERP systems, mobile clients or to BW. there are 2 types of Bdocs message bdocs(M Bdocs) and synchronization Bdocs (S Bdocs). Sbdocs are used for sycronizing between moblie clients and CRM online. M bdocs are used for communication within CRM and also for exachange information between R/3 and CRM as well.
So for sales we normally configure our standard Bdocs or we can modell our own bdocs. lean Bdocs are message bdocs but have only subset of all the fields in a transaction and used for updating only those fields. usage of them can be verified only CRM specialists. it depends on how your organizational sales process is configured in CRM.
in SALES we normally use bdoc BUS_TRANSACTION_MESSAGE this is used for most of the transactions in CRM. so you got to confirm from your team if they are using any other bdocs for slaes additional to the above mentioned.
with regards
ashwin

Aggregate Roll Up and Compression

HI,
I am familiar with the basics of Aggregate Roll Up and Compression.
What I need to know is which one should follow the Other. I mean, should Aggregate Roll Up done before Compression or Vice-Versa ? What r the advantages of doing it in a particular order ?
Regards
Arjun

Hi Arjun,
Aggregate rollup must be performed befor the compression, it should not be vice versa.
The reason is, aggregate rollup is performed on a request basis, it needs request ID to rollup the data. Compression of the request in cube leads to loss of request ID as the data is compressed. Then the rollup is not possiable.
Please let me know if you need any more information.
Regards,
Pankaj

Names of CRM sales demo cubes please?

Names of CRM sales demo cubes please and any other related documentation? my email id is [email protected]
I searched the previous threads about this topic no luck. I will give points to only valuable information. Thanks in advance.
York.

Hi,
Please read best practices for CRM
http://help.sap.com/crm-core
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000557244
Denis

Organization announcements Using CRM and SAP portal

Dear Gurus,
I am trying to build functionality for an organization to do their announcements using CRM 7.0, Once the announcement is published it should be visible on the SAP Portal. I am planning to do like this:
1) Create a campaign using mail form (Announcement content) and target group
2) Select the communication method as e-mail and I have done settings in SPRO to create the activity for an outgoing mail
3) Release the campaign and execute the campaign
4) Upon execution the CRM system will create the activity for an outgoing email (announcement)
4) Create an iView in portal
5) Pull the activities created on CRM and display on the portal iView
My questions are:
1) Is there any standard iView to do this
2) Is there any other standard functionality available to do this announcement using CRM and Portal
3) What are the lining table between Campaign activity and mail forms (e-mail content for announcement) - When I go activity search on CRM WEB UI I can see these activities and also I can see these activities on CRMD_orderadm_h, but unable to get the link tables between this activity and outgoing mail forms.
Thank you in advance and appreciate your help.
Regards,
Reddy

Dear Gurus,
I am trying to build functionality for an organization to do their announcements using CRM 7.0, Once the announcement is published it should be visible on the SAP Portal. I am planning to do like this:
1) Create a campaign using mail form (Announcement content) and target group
2) Select the communication method as e-mail and I have done settings in SPRO to create the activity for an outgoing mail
3) Release the campaign and execute the campaign
4) Upon execution the CRM system will create the activity for an outgoing email (announcement)
4) Create an iView in portal
5) Pull the activities created on CRM and display on the portal iView
My questions are:
1) Is there any standard iView to do this
2) Is there any other standard functionality available to do this announcement using CRM and Portal
3) What are the lining table between Campaign activity and mail forms (e-mail content for announcement) - When I go activity search on CRM WEB UI I can see these activities and also I can see these activities on CRMD_orderadm_h, but unable to get the link tables between this activity and outgoing mail forms.
Thank you in advance and appreciate your help.
Regards,
Reddy

Remote and Transactional Cube

Dear Friends,
How a Basic Cube differs from a Transactional and Remote Cube ?
A Small Example- Cube Carries the Transaction data of Customer ,Material, Sales details ( characteristics) and price, Quantity and Revenue (keyfigures) .
When do we Really have to Change or to Create the Other Cubes to hold those Data ?
What is the Exact Purpose that a Scenario Needs the Remote and Transactional Cube ?
I hope Remote Cube Can be created with "Infoservices" and "Source system" . What is the demand for both these options?
Thanks well in advance ,
Ramesh

hi,
Remotecbue will have only structure and It does't hold any data.
and it is used to bring live data to BW ..At the time of reporting only the data fetches from the source system. So it takes more time to execute.
it will not hav update rules...
Transactional InfoCubes are used only in conjunction with SEM. The data from this kind of InfoCube is accessed transactionally, meaning data is written to the InfoCube (possibly by several users at the same time) and reread as soon as possible. Basic InfoCubes are not suitable for this. You should use Basic InfoCubes for read-only access (for example, when reading reference data).
Rfer
http://help.sap.com/saphelp_bw33/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
thanks
(Assign points if useful..)

Data not matching for a key figure in ODS and In CUBE.

There is one key figure ( Net Units) where in the data is not matching in ODS and in CUBE for only one particular fiscal week (200714)but for the rest of the weeks its matching.
The data is first loaded in to ODS and from there in to CUBE and the source is from flat file.
The cubes are not compressed .so I checked the DB aggregation in the field selection for output screen but still its not matching .( based on the infocube addition property some times if a file is loaded multiple times it adds up in the infocube so when the cubes are not compressed we manually select this option) .
What might be the possible cause for this ???
thanks in advance
jayakrishna

HI,
By any chance if you have loaded same the delta twice into the cube, then there might be the chance of the corrupt data. SO identify the lowest level of document where u can identify the difference.I mean if possible 0calday wise or document leve wise or sales org wise etc. and try to find out where is the difference. Then check in the change log of the oDS, whether the request has gone into cube twice. last option is selectively delete the data from the cube for the week and load a full repair from the ODS for that week.
Sriram

Open Orders are negitive in ODS and Info cube

Hi,
Our ODS is getting data from sales order Item data and from ODS data is going to Info cube.
The problem is that: for few sales orders some open orders are deleting in R/3 but same records are reversing
the old records due to this in the ODS and info cube sales orders Quantity is negative but the orders are not negitive.
Could any one let me know how do we can ressolve it.
Regards,
Sharma. IVN

Hi Sarma,
You should consider checking the attached links below:
ROCANCEL field in R3 extraction program can't catch the LOEKZ (deletion ind
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383836373136%7d
This may help in this case.
Regards,
Pietro

Loading transaction data to CRM and SAP/R3 from legacy system

Where can I find information about expected timing to load orders from a legacy system to CRM and SAP R/3? Does anyone know how long it would take to do the update in CRM using RFC's and BAPI's and then load to SAP/R3 if the order had an average of 3.2 line items per order and there were 50.7 million orders? It is assumed we would run multiple loads concurrently. So I guess a better question is how long does it normally take to load one order with 3.2 line items onto CRM and also SAP R/3?
Any advise would be greatly appreciated. Thank you.

Hi Qutubuddin,
Can you please let me know how you achieved moving data from non sap system to r3 using webdynpro java?
thanks
sunil

Problem with Delivery, Sales and Conditions cubes

Hello everybody,
I will be thankful to you all if you can send a reply ASAP as I need the solution immediately . I have 2 Questions:
No.1:
I am developing Delivery, Sales and Conditions cubes. I am using 2LIS_11_VAITM data source for Sales, 2LIS_12_VCITM for Delivery, and 2LIS_11_VAKON for Conditions. Here I have a problem. I am putting the 3 Cubes in a Multiprovider. I am planning to use 0DOC_NUMBER (Sales Document number) to combine these 3 cubes in a Multiprovider. 0DOC_NUMBER is mapped to VBELN field for Sales and Conditions cubes. But I have mapped VBELN to 0DELIV_NUMB in Delivery Cube. But I need a 0DOC_NUMBER in the Delivery cube as well inorder to join the 3 cubes in a Multiprovider. Can I use field VBELV(Originating document) from the Delivery Data source, 2LIS_12_VCITM, and map it to 0DOC_NUMBER? Will VBELV give me the same data as VBELN? Or should I map VBELN from Delivery datasource to 0DOC_NUMBER in the Delivery cube and not include 0DELIV_NUMB in the cube? Or Is there any other way to do this? We are using BW 3.5.
No.2:
My second Question is that in the Conditions cube, should I need to create different Key figures to store the Condition values for different Condition types or is one Key figure is sufficient to store the condition values for different condition types? We have 4 condition types.
Your suggestions will be greatly appreciated.
Thanks a lot in advance.
Kind Regards,
Swathi.

Hi Swathi
IF you are developing your own cubes and using the standard infosources you can include sales order number in 2lis_12_vcitm. Just check if sales order number is preosent in 2lis_12_vcitm. if present you can map that to 0doc_number and then load it the cube.
2. As there are no condition type present in sales and delivery, you will not get the data in the report based on multiprovider. If you want only condition types data then you can directly write a report on condition cube.
it completely depends on how you design your multiprovider.
REgards
Rak

Aggregates on CRM and WM Cubes

Similar Messages

Maybe you are looking for