Aggregation 2 links from different providers

Is it possible to aggregate 2 links from 2 different internet providers and summarize their bandwidths ?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
GLBP doesn't "work" for any single device, like a router or firewall because it will "see" all the traffic is from the same MAC.
What you might be able to do is use mHSRP (if supported).
You define two virtual GW IPs and make one the active on each router (and each router is the secondary for the other). Then you route to both virtual GW IPs.

Similar Messages

Report with non aggregated and aggregated columns from different facts.

Hi,
We have got requirement as follows,
1) We have two dimension tables, and two fact(Fact1 and Fact2) table in physical.
2) In BMM we have made hierarchies for both dimensions, and are joins both logical fact table.
3)In fact1, we are having three measures of which we have made two as aggregation sum, and one is non aggregated(It contains character).
4)Fact2 have two measures, both are aggregation as sum.
5)Now here the problem arises, we want to make a report with some columns from dim and non aggrgated column from fact1 and and aggregated column fact2
How to resolve the above issue.
Regards,
Ankit

As suggested you really want to move your none-aggregated fact attributes to a logical dimension (using the same physical table as the logical fact). Map this in the BMM layer as a snowflake, Place a hierarchy on this dimension with (at minimum) Total -> Detail levels, then on the other fact table you want to include in the report, set the content level on your other fact measures to the 'Total' level for your new logical Dim and it will allow them to be present in the same report.

My Mac Outlook 2011 Stopped Sending Emails for all POP Accounts from Different Providers

I've had this problem before, but this time I am truly dumbfounded. My Outlook 2011 has randomly stopped sending emails, but I can still receive them. This has happened a few times and I normally change the ports/SSL and I can get it to work. But now I am at a loss. I have several email accounts that I manage. One of which is GMAIL, using IMAP, and this is the only account that currently works find receiving and sending. My POP accounts, four of them, all cannot send emails. They can only receive. One of them is with GoDaddy, and the other three are with an Asian company. I can't find any help on this. I've upgraded Office to the latest version. I've even deleted the accounts and added them back in, and I still can't send email. I'm frankly getting exhausted and sick of this type of problem happening. I honestly use this program and my MacBook Air to send clients information...only to find out hours later that a mail never sent because it's been stuck in my <hidden> Outbox in Outlook 2011. This has hurt me now badly on several occassions. Please HELP!

All SMTP servers are set correctly as far as I can tell, the connection doctor says everything is fine, and I removed all my accounts to re-add them. I added one and tried to send a message--stuck in the outbox--failed. I added another account and deleted the first one and tried to send a message--stuck in the outbox--failed. I'm pretty convinced the problem is with Mac's Mail client...I can send email from anywhere I've tried except for Mac's Mail client. Thanks for the help.
MtM

How to change ADF Calendar colors from different providers?

Hello again, I am using JDeveloper 11.1.2.3.0,
This might be the third question I am asking here about this and till now I got no answers.
CAN ANYONE PLEASE PROVIDE AN EXAMPLE OR A TUTORIAL ON HOW TO CHANGE THE COLORS OF THE ADF CALENDAR COMPONENT?
Excuse me for asking again but I am finding it very wired that nobody doesn't respond to these questions. Is there a bug or nobody really knows how to customize the calendar component?

Thanks for the time you take to explain me,
But, I'm no sur to understand all that you say.
My VO have :: Name : Calendar
Attribute
Type
idCalendar
varchar2(20)
provider
varchar2(40)
startDate
oracle.jbo.domain.date
endDate
oracle.jbo.domain.date
title
varchar2(255)
Question :
1) The tags fields is mandatory or not for the activityStyles ? If Yes, how to define it ?
I would be very obliged if you would send me a sample project. I'am lost and more i try more i don't understant.
Thanks

11 e-mail accounts from different providers are suddenly giving me errors saying they can't connect to IMAP and SMTP server?

I have 11 e-mail accounts that was working fine a minute ago, but now they all say that they can't connect to the IMAP and SMTP servers.
They all work fine on my iphone.
How should i troubleshoot this?
Thanks in advance.

Nevermind, restarted for the third or fourth time, and now it works...
Perhaps it was a time-issue.

ISync plugins from different providers

I own a Sony Ericsson W995, and until now I have used the free iSync plugin provided by Sony Ericsson. But I see that there are other plugin provides, such as .mactomster, nova media and feisar. How do these differ, and what do they offer that the free plugin does not offer?

Well, I probably should have marked this as a question, shouldn't I?

InDesign CS4 packages multiple copies of links from book

I use the Book feature to package the 20-some-odd newspaper ads we create weekly at our in-house art dept for a grocery chain. These ads consist of placed JPEGs of products surrounded by supporting copy and prices. Each ad is a different size and sometimes the products vary from ad to ad, but most use links common to eachother.
The trouble I'm having with ID CS4 is that when I package the book containing all these ads, each common link is copied separately for each ad into the Links folder. For example: File.jpg, File_1.jpg, File_2.jpg, etc.
I've experienced this in CS3 only when the links have had the same file name but were linked from different paths. In CS4, even when the .indd files are all linking to the same files with the same paths, extra copies are created.
I've found it tedious to use the Finder to delete all the extra copies and then re-link everything in InDesign.
Is this a bug or am I missing some setting somewhere?
Thanks,
Amanda

I recreated this problem using a single PSD file that I placed in a 6 page Book file. I found that when you resize the image and/or re-crop the picture box, the book package with create copies of the image.
So, my vote is that this is a bug too.

Remove links from a Web Capture

Is it possible to remove all/disable links within a PDF created using Web Capture? This feature is so much faster than creating individual screen shots of every page, but my client is requesting that the PDF doesn't include web/hyperlinks. Any help would be appreciated. Thanks!

I want to copy links from different search engines.Not clear; do you want to read the file content on the internet given the url address? or ?
Can you explain more
Regards,
Alan Mehio
London, UK

Reading Links from a web page to JAVA program

I am writing Search engine code using servlets. I want to copy links from different search engines. plz help me.

I want to copy links from different search engines.Not clear; do you want to read the file content on the internet given the url address? or ?
Can you explain more
Regards,
Alan Mehio
London, UK

Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?

Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?
Thanks!

Dear Linc,
Thank you for the advice, John Blanchard1 and Linc Davis
As suggested in your reference thread I removed "/Library/Printers/hp/PDEs/hpPostScriptPDE.plugin" and the problem has been resolved.
I am guessing the the plug-in for the hp printers got corrupted and effected every thing, or became unsuitable when I installed an Apple update. I would be most grateful if you can confirm how the problem was coursed so I can understand and learn from this experiance.
Ash

Dynamic link confusing two separate AE compositions in PPro from different projects

I am using CS5 Master Collection for Windows 7 (64 bit) on an HP Pro desktop (Intel core 2 duo, 6Gb RAM). The tower has two hard drives installed (no RAID). CS5 is installed on the original C drive along with the OS, but the working files, footage etc are all on the larger, secondary F drive.
I am working on a DVD project consisting of several seperate PPro projects. Each project has been colour corrected in AE using dynamic linking. Recently two of my projects suddenly became mixed up, by which I mean the video (not the audio) from one AE composition in one project has taken the place of another in another project. The clip remains the same length, but the link apears to be referencing the wrong clip during playback. Interestingly, there are two clips on the track above the affected clip that fade out and in at either end, during the dissolves between clips, the correct footage plays. It is only when the clip plays by itself that the problem occurs. The next clip also has the same error, though the problem only occurs for half the clip and then suddenly corrects itself. Just to be clear, All clips have been rendered, there are no more than two video tracks on the sequence, and I have tried replacing the composition from the asset menu (in which the clip plays back correctly), but the problem remains in the sequence.
I hope that descrition is clear enough. My guess is some kind of file path error in the dynamic link, perhaps due to the separate hard drive. But I really wouldn't know. I'm very pressed for time right now and I'd prefer not to go against workflow and re-edit a new composition in AE, I would also like to understand what is going on in case it happens again.
Any help with ths problem would be appreciated,
J

Thanks Colin, I tried what you suggested with both the AE Project that it should be referencing and the AE project it is erroneously referencing but both failed to fix the issue. Its as if a hidden clip were laid over the top of the one I want to play. Frustrating.
Date: Mon, 24 Oct 2011 19:47:03 -0600
From: [email protected]
To: [email protected]
Subject: Dynamic link confusing two separate AE compositions in PPro from different projects
    Re: Dynamic link confusing two separate AE compositions in PPro from different projects
    created by Colin Brougham in Premiere Pro CS5 & CS5.5 - View the full discussion
It's not the comps that are the problem; it's the project file names themselves. You can have all the comps in a project named the same thing, and it'll be fine, but naming projects incrementally is an issue. After Effects includes a versioning function (Save and Increment) that will create a new AE project file with a serial number, e.g. AE Project 01, AE Project 02, etc. This is all well and good if you're just working in After Effects, but Dynamic Link gets confused and will usually start looking at the later project file for comps. That will just create a big mess, as you've found. Changing the names of the project files won't help things relink automatically properly, but it can help you fix things. Make all your DL AE comps offline in your Pr projects, and name your AE projects in a manner that is not serial (give them more random names). Select your offline AE comps, and right-click > Link Media, and point to the new AE project. Things should link up correctly then--but if they don't, you'll just have to remove all the AE comps from your Pr project, reimport the comps from the newly-named AE project, and replace them. It's a pain but it'll probably just keep getting worse if you don't.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3988711#3988711
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3988711#3988711. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5 & CS5.5 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Redirecting to different pages based on value from table linked from report

Hi,
I wanted to navigate to different pages from a report link based on a value from the table on which the report is built. I was able to link to particular page without any problem.
But, I wanted to link to different pages based on value in the table. Please let me know how can I do this?
Thanks,

kaminey wrote:
Hi,
I wanted to navigate to different pages from a report link based on a value from the table on which the report is built. I was able to link to particular page without any problem.
But, I wanted to link to different pages based on value in the table. Please let me know how can I do this?APEX version?
Is this a standard or interactive report?
How does the value from the table determine the target page used in the link? Is it a page number? Or the result of some computation or process?
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.

Reconfiguring an aggregated link protocol from PAgP to LACP

Hi,
I tried to convert an existing PAgP aggregated link to LACP but having problems bringing up the bundle. I did the following:
1. Config T
2. int range gi3/46 - 47
3.   no channel-group 99
4. exit
5. no int po99
6. int rang gi3/46 - 47
7.   channel-group 99 mode active
8.   channel-protocol lacp
9.   no shutdown
10. exit
11.int po99
12. switchport
13. switchport mode access
14. no ip address
15. swi acc vlan 10
16. sp auto
17. band 2000000
18   no shut
13. end
The Portchannel 99 was re-created but it's status is down/down and all member ports are showing as unbundled/single. Also, I noticed the description field of the new Po99 is the same as the old po99 instead of being blank - meaning that it was copied from the old configuration.
What is the recommended way to reconfigure the Portchannel if I want to use the same portchannel number ?
And strangely, the HP server that the ports are connected to, with SLB teaming configured ports, show the teamed port up ? What does this mean in terms of the operation of this link ? That is, would the host be LACP load-balancing on the two ports whilst the switch operates them in redundancy ?
Thanks for your response.
Sankung

Dear support,
One more question relating to EtherChannel.
We have a 2x1gbps EtherChannel link built between an Access and Core switch in our Data center using two ports in a WS-X6548-GE-TX linecard module. However, I read in one Cisco document that only one port per module should be used in an EtherChannel because of the ASIC configuration in this type of module which limits the channel to 1gbps.
Please can you tell me whether this is still the case with C6509 running IOS 12.x. Otherwise, what is the recommended selection of ports for EtherChannel using the WS-X6548-GE-TX ethernet module.
Thank you very much.
Sankung

Report using Data from different tables

Hello,
I am trying to convert a Cobol batch program to Oracle 6i tabular report.
The data is fetched from many different tables and there are lots of processing(i.e, based on the value of a column from one table need additional processing from different tables) required to generate the desired columns in the final report.
I would like to know what is the best strategy to follow in Oracle Reports 6i. I heard that CREATE GLOBAL TEMPORARY TABLE is an option. ( or REF CURSOR ?) I do not know much about its usage. Can somebody guide me about this or any other better way to achieve the result.
Thank you in advance
Priya

Hello,
There are many, many options available to you, each of which has advantages and disadvantages. This is why it is difficult to answer "what is best?" without alot more details about your specific circumstances.
In general, you're going to be writing PL/SQL to do any conditional logic that cannot be expressed as pure SQL. It can executed in the database, or it can executed within Reports itself. And most reports developers do some of both.
As a general rule, you want to send only the data you need from the database to the report. This means you want to do as much filtering and aggregating of the data as is readily possible within the database. If this cannot be expressed as plain SQL queries, then you'll want to create a stored procedures to help do this work.
Generally, the PL/SQL you create for executing within the report should be focused on control of the formatting, such as controlling whether a field is visible, or controlling display attributes for conditional formatting.
But these are not hard and fast rules. In some cases, it is difficult to get all the stored procedures you might like installed into the database. Perhaps the dba is reluctant to let you install that many stored procedures. Perhaps there are restrictions when and how often updates can be made to stored procedures in a production database, which makes it difficult to incrementally adjust your reports based on user feedback. Or perhaps there are restrictions for how long queries are allowed to run.
So, Reports offers lots of options and features to let you do data manipulation operations from within the report data model.
In any case, Oracle does offer temporary table capabilities. You can populate a temp table by running stored procedures that do queries, calculations and aggregations. And you can define and initiate a dynamic query statement within the database and pass a handle to this query off to the report to execute (ref cursor).
From the reports side, you can have as many queries as you want in the data model, arranged in any hierarchy via links. You can parameterize and change the queries dynamically using bind variables and lexicals. And you can add calculations, aggregations, and filters.
Again, most people do data manipulation both in the database and in Reports, using the database for what it excels at, and Reports for what it excels at.
Hope this helps.
Regards,
The Oracle Reports Team --skw

Running components from multiple providers

I have 10 DB providers, all tied to different schemas. I am tring to call a component named 'EMPLOYEE' from the correct provider/schema (see below). Since I don't want to hard code the schema in the component (it would make me have 10 different versions), I want to dynamically get the schema from the component the user is current connected to. What is the best way to do this?
'<A HREF="' || portal.wwctx_api.get_db_user ||
'.EMPLOYEE.show?

Hi,
There are many ways to achieve this.
If your requirement is just to read data from different database (and not to update it), then using a database link would be a better approach.
You could create a database link in the primary database (target database being the one you would like to query). Base your sql query for the vo using the db link.
-Arun

Aggregation 2 links from different providers

Similar Messages

Maybe you are looking for