Aggregation in column expression is not working in 11.1.1.7.1

Hi Guru's,
After upgrading the application from 11.1.1.6.8 to 11.1.1.7.1 Aggregations in the column expression is not working. I was using the below formula in the column expression
100.0* (Sum((CASE WHEN Service Level >= 60 THEN 1 ELSE 0 END)) / COUNT(DISTINCT(HOUR_INTERVAL)))
I am getting the answer but the values are very high compare. I tried using just Sum((CASE WHEN Service Level >= 60 THEN 1 ELSE 0 END) it also giving very high values.
Please let me know is there is a bug or something need to setup.
Regards
@li

bug 16616127 has been fixed in 11.1.1.7.1
make sure you refresh the catalog to upgrade to your version

Similar Messages

Group by with column alias does not work?

Hello,
The column alias is not working in the group clause?
select col1,col2-col3 "col23", sum(col4)
from table1
group by col1,col23
Error is col23 is invalid identifier.
Thank you.

I guess it's the double quotes around bonus:
SQL> select empno, deptno, sum(bonus)
2 from
3 (
4     select empno, (sal + 500) bonus, deptno
5     from emp
6 )
7 group by empno, deptno
8 ;
               EMPNO               DEPTNO           SUM(BONUS)
                7900                   30                 1450
                7369                   20                 1300
                7499                   30                 2100
                7521                   30                 1750
                7566                   20                 3475
                7654                   30                 1750
                7698                   30                 3350
                7782                   10                 2950
                7788                   20                 3500
                7839                   10                 5500
                7844                   30                 2000
                7876                   20                 1600
                7902                   20                 3500
                7934                   10                 1800
14 rows selected.

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

Need Help...my wireless airport express will not work with my update of snow leopard

after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

Lookup expression is not working when I am using with in the rectangle box in SSRS

I have two datasets with common member is ProgramID.
I have followed the below steps,
1. Added one table (2x2) and mapped this table to dataset1. After that I have removed top row.
That means I am maintaing only data row.
2. Added group to the table (ProgramID). Now the programid is sitting at cell#(1,1) and cell#(1,2) is blank
3. I have verified the report with preview and able to see the data for my all programs. I have 5 programs
4. my plan is adding chart and matrix reports to cell# (1,2). If I am adding chart/matrix to the cell#(1,2) then we can't contol the cell alignments in terms of height x width.
To resolve that problem, I have added one rectangle control to the cell#(1,2) then I have added my chart and matrix report
5. After completing the report, I have verified with preview and able to see the reports (chart/matrix) for all my 5 programs by page wise (note: I have provided page break before for my rectangle)
6. Till this point, I have no issues
7. Now, I have added one more row under the group. so, we have our main table (2x2). Becuase of programId group we can only see 3 cells in total table (cell# (1,1) =ProgramId cell#(1,2)=chart and matix reports under rectangle box; cell#(2,1)=already
merged with ProgramID group; cell#(2,2)= planned to add one more rectanlge and add two reports (chart and matrix)
8. Now, i have added rectangle to cell#(2,2) then added chart and matrix reports within the rectangle.
9. cell#(2,2) reports are needs to extract the data from dataset-2. Here we have common member is ProgramID (ds-1,ds-2)
10. First I have tested for matrix report by adding lookup expression
      Matrix report (2x2)
     row-1: Cell(1,1)= Gender report heading ; cell(1,2)=Month (column group)
     Note: month is also common member in both the datasets.
     row-2: cell(2,1)-- =Lookup(Programid.value, Programid.value,Gender.value,"Dataset2") (Gender data is Male and Female)
                Cell(2,2) -- empty for now
11. I have tried to preview the report and able to see the report without any issues and below are observations
        main Table (2 x2)
         Cell# (1,1) = ProgramID --Returning all 5 programs properly
         Cell# (1,2) = Dataset1 related report (chart and matrix reports under rectangle) -- able to see without any issues
         Cell#(2,1) = We already know this is merged cell. i.e menas ProgramID dispalying
          Cell#(2,2)= Only Male record is dispalying in the matrix report which is under rectanlge (here we have applied Lookup expression.
Note: male is the first record from the database and Female is the second record
Also, observed that Cell#(2,2) matrix report is unable to display the gender count information when I have provided count value expression in the cell(2,2) within the matrix and the expression I have uses is
= sum(Lookup(ProgramId.value,ProgramId.value,GenderCOunt.value,"Dataset2"))
Please ask me if I am unable to explain or lengthy explain.
Point : Why the lookup expression is giving the first record only (in case of gender #(male, female) and why it is unable to give the gendercount. Gendercount cell is totally blank.
Please help me.
Kishore.

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

USB/eSata express card not working on stock kernel

Hello everyone,
I have a weird problem and I don't seem to find any solution by myself. Let me give you some background info on what I plan to do.
I purchased an express card to eSata/USB 3.0 adapter and want to make it work on my laptops. Precisely, it is this card: http://www.amazon.de/Notebook-Express-C … B007F8TXZ8
1: Lenovo X200s (1,6GHz) running Ubuntu 14.04 amd64
2: Lenovo X200s (1,6GHz) running Debian 7 amd64
3: Lenovo X200T (1,6GHz) running ArchLinux amd64
The card does work fine only on the Ubuntu machine. I would like to make it run on the two other ones as well. I thought I might get help here getting it to work on machine 3 and then transfer the results to machine 2. What really matters to me is eSata, btw, I do not even have a USB 3.0 device to test with.
First of all, here's what happens when I plug the card into machine 1:
user@1-ubuntu:~$ uname -r
3.13.0-39-generic
user@1-ubuntu:~$ dmesg | tail -n 44 # that's where it begins
[ 1953.576472] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
[ 1953.728077] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
[ 1953.728119] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1953.728304] pci 0000:05:00.0: PME# supported from D3hot
[ 1953.736062] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf0007fff 64bit]
[ 1953.736087] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 1953.736092] pcieport 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1953.736098] pcieport 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 1953.736104] pcieport 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 1953.736133] pci 0000:05:00.0: no hotplug settings from platform
[ 1953.736143] pci 0000:05:00.0: enabling device (0000 -> 0002)
[ 1953.736398] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1953.736406] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[ 1953.743621] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
[ 1953.743629] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[ 1953.743635] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[ 1953.743784] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 1953.743788] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1953.743791] usb usb9: Product: xHCI Host Controller
[ 1953.743794] usb usb9: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[ 1953.743796] usb usb9: SerialNumber: 0000:05:00.0
[ 1953.743973] hub 9-0:1.0: USB hub found
[ 1953.743990] hub 9-0:1.0: 2 ports detected
[ 1953.744147] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1953.744153] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[ 1953.744218] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 1953.744221] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1953.744224] usb usb10: Product: xHCI Host Controller
[ 1953.744227] usb usb10: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[ 1953.744229] usb usb10: SerialNumber: 0000:05:00.0
[ 1953.744366] hub 10-0:1.0: USB hub found
[ 1953.744383] hub 10-0:1.0: 2 ports detected
[ 1954.447851] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1954.460505] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 1954.461215] usb 10-1: New USB device found, idVendor=174c, idProduct=5106
[ 1954.461219] usb 10-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1954.461222] usb 10-1: Product: AS2105
[ 1954.461225] usb 10-1: Manufacturer: ASMedia
[ 1954.461228] usb 10-1: SerialNumber: 00000000000000000000
[ 1954.463146] usb-storage 10-1:1.0: USB Mass Storage device detected
[ 1954.463279] scsi7 : usb-storage 10-1:1.0
[ 1955.460385] scsi 7:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 5
[ 1955.465099] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 1955.466483] sd 7:0:0:0: [sdb] Attached SCSI removable disk
I wouldn't know of any attached disks, and neither does it show up. Note that it is only the card I plugged in, no hard drive attached to it.
hburg1234@packrehsel:~$ lspci -k
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Lenovo Device 20e0
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Lenovo Device 20e6
Kernel driver in use: mei_me
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07)
Subsystem: Lenovo Device 20ec
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Lenovo Device 20ee
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f1
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo Device 20f2
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f1
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo Device 20f5
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
Subsystem: Lenovo Device 20f8
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo Device 20f9
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
Subsystem: Intel Corporation WiFi Link 5100 AGN
Kernel driver in use: iwlwifi
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
Subsystem: Device 174c:2104
Kernel driver in use: xhci_hcd
The last one seems to be important to me, so here's a verbose output on that one.
user@1-ubuntu:~$ lspci -v | tail -n 8
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller (prog-if 30 [XHCI])
Subsystem: Device 174c:2104
Physical Slot: 3
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at f0000000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
user@1-ubuntu:~$ sudo udevadm monitor -k
monitor will print the received events for:
KERNEL - the kernel uevent
KERNEL[2585.956558] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0 (pci)
KERNEL[2585.972086] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb9 (usb)
KERNEL[2585.972116] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb9/9-0:1.0 (usb)
KERNEL[2585.975736] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10 (usb)
KERNEL[2585.975763] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-0:1.0 (usb)
KERNEL[2586.689218] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1 (usb)
KERNEL[2586.690935] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0 (usb)
KERNEL[2586.695723] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9 (scsi)
KERNEL[2586.695757] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/scsi_host/host9 (scsi_host)
KERNEL[2587.692633] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0 (scsi)
KERNEL[2587.692667] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0 (scsi)
KERNEL[2587.692691] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
KERNEL[2587.692708] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
KERNEL[2587.692824] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_generic/sg1 (scsi_generic)
KERNEL[2587.692898] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
KERNEL[2587.699636] add /devices/virtual/bdi/8:16 (bdi)
KERNEL[2587.699771] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[2587.703694] change /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[2587.709178] change /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
Apart from the supposedly found block device (can't judge) I am not sure if there is anything that is really eSata specific and not USB 3.0 related.
So far what I think I can tell from the output is that the modules
pciehp pci pcieport
seem to be dealing with the express card as such whereas
xhci_hcd
takes care of USB 3.0. I cannot see any clear reference to the eSata connector, which might not be surprising if the bus is just passed through (again: not sure).
For completeness' sake here comes the output of
user@1-ubuntu:~$ lsmod | tee before
Module Size Used by
ctr 13049 1
ccm 17773 1
pci_stub 12622 1
vboxpci 23194 0
vboxnetadp 25670 0
vboxnetflt 27613 0
vboxdrv 339502 3 vboxnetadp,vboxnetflt,vboxpci
cuse 13445 3
dm_crypt 23177 1
btusb 32412 0
cdc_ether 14351 0
usbnet 43913 1 cdc_ether
cdc_acm 28803 0
mii 13934 1 usbnet
cdc_wdm 19053 0
rfcomm 69160 8
bnep 19624 2
bluetooth 391136 22 bnep,btusb,rfcomm
binfmt_misc 17468 1
coretemp 13435 0
kvm_intel 143148 0
kvm 451729 1 kvm_intel
thinkpad_acpi 81013 0
nvram 14411 1 thinkpad_acpi
serio_raw 13462 0
arc4 12608 2
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_hda_codec_conexant 57441 1
iwldvm 232285 0
snd_hda_intel 56451 3
mac80211 630653 1 iwldvm
snd_hda_codec 192906 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
snd_rawmidi 30144 1 snd_seq_midi
lpc_ich 21080 0
iwlwifi 169932 1 iwldvm
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_pcm 102099 2 snd_hda_codec,snd_hda_intel
mei_me 18627 0
cfg80211 484040 3 iwlwifi,mac80211,iwldvm
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
mei 82276 1 mei_me
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 29482 2 snd_pcm,snd_seq
snd 69322 17 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,thinkpad_acpi,snd_seq_device,snd_seq_midi
soundcore 12680 1 snd
parport_pc 32701 0
ppdev 17671 0
mac_hid 13205 0
tp_smapi 28367 0
thinkpad_ec 14449 1 tp_smapi
lp 17759 0
parport 42348 3 lp,ppdev,parport_pc
i915 783961 2
psmouse 106714 0
ahci 25819 3
libahci 32716 1 ahci
i2c_algo_bit 13413 1 i915
e1000e 254433 0
drm_kms_helper 55071 1 i915
drm 303102 3 i915,drm_kms_helper
ptp 18933 1 e1000e
pps_core 19382 1 ptp
video 19476 1 i915
wmi 19177 0
and a list of the newly loaded modules:
user@1-ubuntu:~$ diff before <(lsmod)
1a2
> usb_storage 62209 0
Now, on my Arch machine the situation is as follows when the card is plugged in:
user@3-arch:~$ uname -r
3.17.2-1-ARCH
user@3-arch:~$ sudo udevadm monitor -k
monitor will print the received events for:
KERNEL - the kernel uevent
user@3-arch:~$ lsmod
Module Size Used by
sr_mod 21903 0
cdrom 47479 1 sr_mod
hid_generic 12393 0
usbhid 48603 0
hid 102220 2 hid_generic,usbhid
cdc_ether 12564 0
usbnet 34978 1 cdc_ether
cdc_acm 30362 0
cdc_wdm 17427 0
mii 12675 1 usbnet
ctr 12927 0
ccm 17534 0
fuse 87410 3
joydev 17063 0
wacom_w8001 12706 0
serport 12842 1
mousedev 17272 0
iTCO_wdt 12831 0
iTCO_vendor_support 12649 1 iTCO_wdt
coretemp 12820 0
kvm 417429 0
pcspkr 12595 0
psmouse 107214 0
evdev 21544 20
mac_hid 12633 0
serio_raw 12849 0
i2c_i801 16965 0
snd_hda_codec_conexant 21835 1
snd_hda_codec_generic 63126 1 snd_hda_codec_conexant
arc4 12536 2
iwldvm 184847 0
mac80211 604456 1 iwldvm
i915 905750 2
lpc_ich 20768 0
iwlwifi 156837 1 iwldvm
snd_hda_intel 26387 0
snd_hda_controller 26938 1 snd_hda_intel
cfg80211 445286 3 iwlwifi,mac80211,iwldvm
thinkpad_acpi 69074 0
e1000e 215686 0
snd_hda_codec 108536 4 snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
drm_kms_helper 80934 1 i915
shpchp 35210 0
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88487 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
ptp 17692 1 e1000e
pps_core 17225 1 ptp
snd_timer 26614 1 snd_pcm
wmi 17339 0
drm 259106 4 i915,drm_kms_helper
nvram 13034 1 thinkpad_acpi
thermal 17559 0
snd 73436 8 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,thinkpad_acpi
soundcore 13031 2 snd,snd_hda_codec
led_class 12859 2 iwldvm,thinkpad_acpi
rfkill 18867 3 cfg80211,thinkpad_acpi
ac 12715 0
hwmon 12930 2 coretemp,thinkpad_acpi
acpi_cpufreq 17218 1
battery 17452 0
i2c_algo_bit 12744 1 i915
mei_me 17900 0
tpm_tis 17182 0
i2c_core 50152 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
tpm 31467 1 tpm_tis
mei 75079 1 mei_me
intel_agp 17432 0
intel_gtt 17848 3 i915,intel_agp
video 18043 1 i915
processor 27777 3 acpi_cpufreq
button 12953 1 i915
sch_fq_codel 17343 6
tp_smapi 27621 0
thinkpad_ec 12813 1 tp_smapi
ext4 497696 3
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 86417 1 ext4
sha256_ssse3 25692 2
sha256_generic 16804 1 sha256_ssse3
ecb 12737 0
cbc 12696 1
algif_skcipher 17051 0
af_alg 12988 1 algif_skcipher
dm_crypt 22551 1
dm_mod 93490 15 dm_crypt
sd_mod 44398 3
crct10dif_generic 12581 1
crc_t10dif 12431 1 sd_mod
crct10dif_common 12356 2 crct10dif_generic,crc_t10dif
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
ata_generic 12490 0
ahci 33291 2
libahci 27158 1 ahci
pata_acpi 12771 0
uhci_hcd 43507 0
ehci_pci 12512 0
ehci_hcd 69939 1 ehci_pci
libata 181518 4 ahci,pata_acpi,libahci,ata_generic
usbcore 199381 9 uhci_hcd,ehci_hcd,ehci_pci,usbhid,usbnet,cdc_acm,cdc_wdm,cdc_ether
usb_common 12440 1 usbcore
scsi_mod 147543 3 libata,sd_mod,sr_mod
i8042 18002 1 libps2
serio 18282 9 serio_raw,atkbd,i8042,serport,wacom_w8001,psmouse
Sticking to my suspicion that this might just be a USB related issue and eSata might still work due to some sort of passthrough, I attached the very eSata drive that I could mount on Ubuntu. It did not work.
I then researched and found this blog post: http://okomestudio.net/biboroku/?p=1360
So I downloaded the pkgbuild for the arch linux core kernel and checked the config. It matched the recommendations.
Another hint I found was to unload acpiphp and force-reload it. However, this tip does not seem to apply to the arch kernel:
[user@3-arch:~$ sudo rmmod acpiphp
rmmod: ERROR: Module acpiphp is builtin.
Anyone any idea on how to make the card work?
Thank you!
Last edited by archery1234 (2014-11-15 10:46:35)

For anyone else seeking help on that: Card slot was deactivated in 2/3 Bioses.

Regular expression does not work in IE

Hi,
I'm having a regular expression which should check the content of an inputText field: it should contain a number, a character and the size should be at least 6. It's working when I test it in FireFox but it always fails to succeed in IE:
 <af:inputText>
 <af:validateRegExp pattern="^(?=.*[a-zA-Z])(?=.*[0-9])[a-zA-Z0-9]{6,24}$"
 noMatchMessageDetail="Does not match."/>
 </af:inputText>How comes it does not work in IE (6.0)?
JDeveloper 10.1.3.3
Thanks in advance,
Koen Verhulst

hi Koen
The web page you refer to ...
http://www.fileformat.info/tool/regex.htm
... seems to be doing server side Java regular expressions (and as such will behave the same in both FF and IE).
The af:validateRegExp component you want to use does client side evaluation of the regular expression, using scripting, hence the apparent difference between FF and IE.
There is also this web page ...
http://www.regular-expressions.info/javascriptexample.html
... that seems to behave similar to the markup and scripting resulting from the af:validateRegExp component.
Besides the value "2abcdef" there seem to be others that are accepted by IE for the regular expression "^(?=.*[a-zA-Z])(?=.*[0-9])[a-zA-Z0-9]{6,24}$", values like these:
"a2abcdef", "a2abcde", "abcdef2abcde", "2a3cdef", "2a34567"
Although these values are not accepted by IE (but are accepted in FF):
"2abcde", "23bcdef"
success
Jan

Airport Express A1088 Not Working With iTunes 10 AirPlay but works with iPad & iPhone

Hi,
I'm really hoping someone can help me. I have just got an ADSL connection at home and have started using my Airport Express I've had for years but haven't used, model number A1088. I can use the Airport Express to use AirPlay from my iPhone, iPod and iPad. iTunes 10 on my 2010 13" MacBook Pro recognises the Airport Express as an AirPlay device, however when I attempt to play music through remote speakers using the Airport Express as the AirPlay device I receive the error message "An error occurred while connecting to AirPlay device "emptyk86 Airport Express". The network connection failed". I have performed numerous hard resets and resets within the Airport Utility, to no avail. I could accept that as the Aiport Express is quite old now, that it could be broken, but as it works for all iPhones, iPods, and iPads I don't understand what I'm doing wrong!
Thanks for your time.

The same thing started happening to me this morning. I have an old Airport Express, New MacBook Pro, recently updated to Lion, have the latest version of iTunes. Everything worked fine until this morning. I was playing music, stopped it, and when I tried to resume, got the error message. I turned evertying off and on and reset everything. The problem persisted. However, I had no problem playng music from my iPad library through the system using the iPad.
I have a remote app on the iPad and, oddly enough, found that I could play anything (playlists, songs, etc.) from the MacBook Pro iTunes library through the system using the iPad remorte app. Once I had that running, I went back to the MacBook Pro and found I had full functionality with iTunes on the MacBook Pro. I closed and reopened iTunes a couple of times on the MacBook Pro to test it, and found that sometimes it would work fine and sometimes I would get the error message. When I got the error message, I went through the procedure with the iPad to get it going, and that worked most of the time. When it did not work the first time, I found that playing a song from the iPad library first and then going to the remote app seemed to help.
For sure, this is more a workaround than a solution, but maybe someone who understands how these things work might recognize the problem and propose a solution.

Hide or show the Artist and Album columns Command +B not working -itunes 11

Command +B
Shortcut
Hide or show the Artist and Album columns is not working no respond..-itunes 11 my desktop working but not my laptop MBA.
why is that?
anyone help me?

oh ok.. itunes 11.0.1 update fixed this issue ... !!

Copy expression only not working

I'm working on AE CC 2014.
Copy expression only is not working, I'm not sure if it's not copying anything or not pasting what it copied. But no expression is being applied to the other layers as it used to be the case before.

Hey Tim,
I filed a bug report with Adobe as you asked.
When you said the problem went away are you positive the only thing you did was switch applications? What's happening now is that I select Copy expression only and then try and paste and nothing happens, but then the entire menu is grayed out (see attached) until I purge everything, at what point the issue starts all over.
I also tried switching to other applications and copying something random there to see if I can unclog the clipboard, but nothing seems to work.
I haven't been able to make the problem go away.
Best,
David.

11.1.1.5 - Column Heading Alignment not working

I've created a simple one-column analysis, and I'm viewing the Table. I'd like to center the column header (currently it is left-aligned).
In the Layout section for the Table view, I'm selecting Format Headings from the column's option icon.
Changing the font characteristics works fine. Changing the cell background color works. However, changing the Horizontal Alignment and Vertical Alignment have no effect.
I've also tried this on the on the Column Properties ... Column Format for the column, selecting the formatting icon next to the Column Heading field. No luck there either.
Where is the correct place to change the alignment for column headings?

hi
try this....
1. select criteria and go to column properties
2.Select Column Format(second tab) ->Column Heading ->format ->set the center for cell horizontal and vertical.
if you selected sort for this column, the center alignment is not working.
Thanks
Edited by: Kavitha on Jul 1, 2011 4:15 PM

[SOLVED] left column hyperlinks do not work in Firefox

I created a web page where all the links work perfectly in Dreamweaver viewer, IE, Chrome. In Firefox the links in the left column do not work. Here are the codes and the link: 
 
<pre><nowiki> <img src="images/envel.jpg" width="11" height="11" alt="email"/> <a href="mailto:[email protected]" class="emailtext">[email protected]</a> 
 
<a href="board.html" title="Our board" >Our board</a>
 
<a href="contact.html" title="Contact us" target="_blank">Contact us</a>
<a href="membership.html" title="Become a member" target="_blank">Become a member</a>
<a href="sponsors.html" title="Donate" target="_blank">Donate</a> 
</nowiki></pre>
see www.thatcherteam.com/afg

Thank you for your answer. I solved he problem last night. The right column was hiding the left column, in giving a smaller width the problem solved.

Column Link is not working on a Manual Tabular Form

Hello,
I am having some issues creating a link on a column based on a manual tabular form (I am using Apex 4.1.1.00.27, Oracle DB 10.2.0.5.0):
On my page 1, I created a process that deletes and creates a collection based on the “emp” table; then, I have a manual tabular form based on that collection; and finally, a link on the “deptno” column of the manual tabular form that points to my Page 2 (department form) and it’s passing the parameter P2_DEPTNO:#DEPTNO#.
The problem is that when I press the link, the page is not submitting the DEPTNO value. Also, I notice that as soon as I specify the column as a link column, it does not show the value in my tabular form, but if I remove the link, it shows the value correctly.
I created an example on apex.oracle.com in case some of you want to look into it:
Workspace: EDIAZJORGE
Username: test
Password: test123
App Name: Sample App
App Number: 12231
I appreciate any ideas or suggestions on how to solve this issue.
Thank you,
Erick

Hello,
Try following code
SELECT APEX_ITEM.HIDDEN(1,C001) EMPNO,
 APEX_ITEM.TEXT(2,C002) ENAME,
 APEX_ITEM.TEXT(3,C003) JOB,
 APEX_ITEM.TEXT(4,C004) MGR,
 APEX_ITEM.TEXT(5,C005) HIREDATE,
 APEX_ITEM.TEXT(6,C006) SAL,
 APEX_ITEM.TEXT(7,C007) COMM,
 '<a href="f?p=&APP_ID.:2:&APP_SESSION.:::2:P2_DEPTNO:'||C008||'"><img src="/i/ws/small_page.gif"></a>' DEPTNO
FROM APEX_COLLECTIONS
WHERE COLLECTION_NAME = 'EMP_COLLECTION'
UNION ALL
SELECT APEX_ITEM.HIDDEN(1,NULL) EMPNO,
 APEX_ITEM.TEXT(2,NULL) ENAME,
 APEX_ITEM.TEXT(3,NULL) JOB,
 APEX_ITEM.TEXT(4,NULL) MGR,
 APEX_ITEM.TEXT(5,NULL) HIREDATE,
 APEX_ITEM.TEXT(6,NULL) SAL,
 APEX_ITEM.TEXT(7,NULL) COMM,
 APEX_ITEM.TEXT(8,NULL) DEPTNO
FROM DUALFor existing data, it will display as link and for new data, it will still display as text box.
Please note that you should display DEPTNO as standard column and not as LINK.
Regards,
Hari
Escaped < in tags :)

SQL-Tokenizer based on regular-expressions does not work

I'm on 10gR2
Following SQL-Tokenizer converts string :str to rows using :delim as the delimiter-char (:str and :delim are parameters):
select level, regexp_replace(regexp_substr( :in_str || :in_delimiter, '(.*?)' || :in_delimiter, 1, level ), :in_delimiter, '') as token
from dual
connect by regexp_instr( :in_str || :in_delimiter, '(.*?)' || :in_delimiter, 1, level ) > 0
order by level asc ;
When using the pipe-symbol "|" as the delimiter, it doesn't work; the rows are processed, but the tokens are null. Using an other char as delimiter (e.g. ";") works fine.
:str = "123;456;A1;67X;0;-8" & :delim = ";" => works fine
:str = "123|456|A1|67X|0|-8" & :delim = "|" => does not work
I think the bug is in the regexp-parameter for the pattern, isn't it?
Why doesn't work the pipe-symbol as delimiter?
Can anybody give me a hint for using the correct regexp-pattern?
thx
Nuerni

select level, rtrim(regexp_substr( :in_str || :in_delimiter, '(.*?)' || :in_delimiter, 1, level ),:in_delimiter ) as token
from dual
connect by regexp_instr( :in_str || :in_delimiter, '(.*?)' || :in_delimiter, 1, level ) > 0
order by level asc ;use a rtrim instead of regexp_replace then it works...
Ravi Kumar

Extend Wireless Signal -TimeCapsule 500GB + 2 Express 2009 - Not Work !!

Hi
In my home, I use a Time Capsule first gen 500GB as Router Acess Point. Attached to it, I have 1 PC Desk(Wired), 1 Playstation3/PSP (Wireless), 1 Brigde Wifi used in my SKY Decoder, 2 Iphone (one Classic and one 3GS), 1 IPAD, 2 Macbook White 2008 and 1 AppleTV 2G.
My Home has many rooms and walls are trick, which reduces the signal. To improve the signal, I bought 2 Airport Express, but never worked properly.
When I put The express to Extends the signal, my macbook stops the TimeMachine Backup, my PS3 don´t logs on network and my And my browsing speed drops dramatically, but the sign of the signal is full.
I use the TimeCapsule as MIX WIFI (802.11N-b/g 2.4ghz), because most of the equipment working in G ( Iphones, PS3, Sky, PSP).
The configs on TC ( Criate a Wireless Network - WIFI b/g/n 2.4Ghz - Allow it to be expanded - channel 2 - WPA/WPA2 Personal - SSD WIFILNK_N)
The confis on Express 1 and 2 ( Extend a Wireles Network - Same SSID on TC - Allow wifi client - WPA/WPA2 Personal with same Key)
I don´t know what I'm doing wrong, because I tried all modes and settings in Express WDS and Deny Wifi Client Connection)and have the same problem.
I don´t try to put all in True WIFI N (2.4 or 5ghz) because the others equipments.
My last attempt is to share this problem here...
Cleber

cleberpinto wrote:
My Home has many rooms and walls are trick, which reduces the signal. To improve the signal, I bought 2 Airport Express, but never worked properly.
Welcome to Apple's discussion groups.
What some people do wrong with network extension is to put the extending device too far from the main station. Try moving them to a point half way between the main station and the remote client.
When I put The express to Extends the signal, my macbook stops the TimeMachine Backup, my PS3 don´t logs on network and my And my browsing speed drops dramatically, but the sign of the signal is full.
That menu bar icon just shows you a rough indication of the signal from the nearest access point but doesn't reflect overall throughput. If you hold down an "option" key when you pull down that menu bar icon, you'll see a value for "RSSI", which is a better indicator of the signal strength.
Use the advice in this thread on the Time Capsule to investigate the signal and noise levels that each AirPort Express sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
I don´t try to put all in True WIFI N (2.4 or 5ghz) because the others equipments.
I don't know what you mean by "True WiFi".

Aggregation in column expression is not working in 11.1.1.7.1

Similar Messages

Maybe you are looking for