Aggregation level  is locked by the Change and Transport Organizer

Dear All,
               I have created aggregation level in the planning cube and transported to Production from dev, Once i transported to production i am not able to change the aggregation level in Dev, and also aggregation level is Inactive.  Aggregation level YPNC2 is locked by the Change and Transport Organizer. Please suggest how to activate the aggregation level in Dev.
Thanks
Christopher

Hi,
  Kindly check the following,
1. Is your aggregation level transported properly to the production system ?
2. Was your aggregation level active while you were including it in the transport request ?
3. Did you properly include the aggregation level in the request?
If you find that the answers of all the above questions is "YES", then there should not be any problem in your aggregation level.
Hope this solves your issue, if not kindly get back to me.
Regards,
Balajee

Similar Messages

  • Aggregation level ZFI_FINGL is locked by the Change and Transport Organizer

    Dear,
    After transport from a dev to prod system I get this message on the planning modeler :
    "System is not set to changeable - objects are not changeable
    Aggregation level ZFI_FINGL is locked by the Change and Transport Organizer"
    Do you know how to fix it ?
    Thanks in advance,
    Thibaut

    Hi,
    By default the planning modeller configuration is added to the standard BEx transport (if it is not saved in $TMP). If there is not one set up then create one in the admin workbench transport connection.
    If you don't use this, then you can add the objects you wish to change manually into a transport before you change them - this also works.
    Cheers
    Mark

  • In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?

    In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?
    =IF(I127,NOW()," ")
    I127 equals a check box. The formula retuns a value of the current date and time when a check is placed in the box. How does one lock that date and time so that it cannot be changed?

    I don't think it is possible to lock in the date and time using a formula. You could put NOW() in a cell, copy, and Edit Paste Formula Results where you want the result.
    Or if you are "time stamping" a lot, you may find this Automator Service (Dropbox download) helpful. It puts a "Today" function (actually it should be named "Now" because it includes both date and time) in your Services menu like this:
    Just doubleclick the .workflow package to install it. You may have to click "download anyway" in System Preferences > Privacy & Security.
    If you want you can assign the service a keyboard shortcut in System Preferences here:
    SG

  • Trying to restore the software locks up the iphone and renders it unusable

    Trying to restore the software locks up the iphone and renders it unusable

    Thanks for your reply.
    When connected to the PC the screen on the phone showed the apple logo and stayed frozen with that image. The only way to get rid of the image was to hold both the power and home buttons. The message on the iTunes app said: iTunes is restoring the software on this iPhone. I left it like that overnight, but there was no change in the morning. Took it to the Telstra Shop in Melbourne, and they tested and said it was 'broken'. They gave me a new phone, but I had to recover all my contacts, agenda, etc from backup on the PC.

  • IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

    IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

    It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

  • I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

    I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

    I don't understand your last paragraph.
    "The home page also has a full bar ..." What does "full bar" mean? " ... instead of the tray it had before."  What does "tray" mean?
    Anyway, you might try Settings > General > Reset > Reset Home Screen Layout
    I guess that cannot make things any worse.

  • Is it possible to lock down the _vti_bin and _layouts pages with a wildcard option.

    Hi all,
    A client of mine is running an internet facing sharepoint site. I have managed to lock down the _vti_bin and _layouts pages users for anonymous by using the following entries in my main web.config file:
    <location path="_layouts">
          <system.web>
            <authorization>
              <deny users="?" />
            </authorization>
          </system.web>
        </location>
    and
    <location path="_vti_bin">
          <system.web>
            <authorization>
              <deny users="?" />
            </authorization>
          </system.web>
        </location>
    But this is only ok for the root site collection. Is there a way to lock down all site collections, including sub sites with a type of wildcard entry?
    Due to the nature of the clients business, they will be creating many site collections and subsites. I am trying to find a scalable way to manage this. To add an entry for every new site collection or subsite that gets created on the fly does not seem like
    the most manageable solution.
    Any suggestions would be appreciated.
    Regards
    Mirco

    Hi Sachin,
    Thank You very much for the feedback. The info to secure system pages from authenticated FBA users is very helpful and I will definitely  implement it.  With reference to your second post. This is actually the information I used to lock down my
    sites from anonymous users. Applying this method I noticed that you needed to put an entry for every single site collection and sub site collection, e.g. if I ONLY had a site collection at
    https://me.myserver.com then the following entries in the web.config would secure the _vti_bin and _layouts folder from anonymous users:
    <location path="_layouts">
          <system.web>
            <authorization>
              <deny users="?" />
            </authorization>
          </system.web>
        </location>
    and
    <location path="_vti_bin">
          <system.web>
            <authorization>
              <deny users="?" />
            </authorization>
          </system.web>
        </location>
    But lets say I added another site collection at
    https://me.myserver.com/sites/mysitecollection I would have to add the following entries to the web.config file to secure it from anonymous users:
    <location path="sites/mysitecollection/_layouts">
          <system.web>
            <authorization>
              <deny users="?" />
            </authorization>
          </system.web>
        </location>
    and
    <location path="sites/mysitecollection/_vti_bin">
          <system.web>
            <authorization>
              <deny users="?" />
            </authorization>
          </system.web>
        </location>
    Now this method might be manageable if you are only gonna have 5 or 10 site or subsite collections. My client will have 30, 40, 50, who knows how many. This is why I am trying to find a more manageable way of locking these sites down.
    You can imagine what my web.config will look like eventually and the admin involved in continuously adding these entries to the web.config file to keep it safe from anonymous users.
    Regards
    Mirco

  • I am having issues with adjusting the duration of time for each still frame and transition in imovie 11.  Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

    I am having issues with adjusting the duration of time for each still frame and transition in imovie 11.  Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
    Thank you,
    lagrl

    Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider.  iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
    Does this help.  Perhaps you already know this ?

  • I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

    I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

    Your only recourse is to force it into DFU mode:
    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

  • I rebuilt the thumbnail cache and lost all the changes and editing I had made to 4000 photos every photo reverted back to the original

    A tech rebuilt my iphoto thumbnail cache and afterwards all the changes and editing of all my 4000 photos was gone!
    Every phot had reverted back to the original!!!!! WHAT HAPPENED???? Why were all my changes destroyed? Where are the photos that I edited?
    Also a bunch of photos disappeared. HELP!!!!!

    Of course there is no reason that rebuilding a thumbnail cache would cause a loss of all editing of my photos!!! But that's what happened.
    I was there when the tech rebuilt  the library and thumbnails. He held down shift & command and opened Iphoto and a window appeared with "Rebuild Photo Library" with 6 boxes to check such as
    1) Repair Iphoto Library Database
    2) Rebuild Iphoto Library Database from automatic backup
    3) Rebuild the photos' small thumbnails
    4) Rebuild all the photos'thumbnails (this may take a while)
    5) Recover orphaned photos in the Iphoto Library Folder
    6) Examine and repair IPhotoLibrary file permissions
    The tech checked all boxes and after Iphoto has rebuilt everything all my editing was gone and all my photos had reverted back to their originals representing 5 years work.
    There are no stuck keys on my keyboard of my computer.

  • Change and transport system not configured

    hi
    Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
    How to fix this?
    i appreciate your help in advance. Thanks
    Madhu

    Hi
    After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
    STMS is mainlly used for moving objects from one system to other system
    Regards
    kiran kumar.v

  • All Information regarding Change and Transport management System in SAP

    Hello Experts,
    Iam into Basis . I need all information ,fundamentals and concepts over Change and Transport management system in SAP .Its fundamentals,the way it works ,how requests r transporteded etc.  I want more of this information in regards to practical scenario. Plz dont provide help link as iam aware of that. I need good explanatory content ,in your own words shall be appreciated more. If any body has any self prepared good explanatory and procedural matter , tat will be of help.requested to revert at earliest as this is a bit urgent. My Email Id is [email protected]
    Useful answers shall be rewarded points.
    Thanks and Regards,
    Somya

    check this link
    http://help.sap.com/saphelp_47x200/helpdata/en/d7/8eb9361a75ea43e10000009b38f839/frameset.htm

  • No administration authorization in Change and Transport System in CHARM

    Hi guys,
    I am currently working for CHARM implementation for ECC 6.0
    now my problem i created an urgent correction  and i released the transport request successfully, but when i try to execute the Pass correction test action it is saying that No import into test system has taken place yet. then i went to task plan and checked there in quality system it is saying No administration authorization in Change and Transport System.
    So i asked my basis team to assign the S_TMW_IMPORT profile to user TSADM in 000 client of quality system and additinally our basis team has assigned S_CTS_ADMI. authorization object to TSADM user ID in 000 client of quality system. But SAP has suggested to assign S_CTS_IMPALL and S_CTS_IMPSGL authorization profile to S_CTS_ADMI.
    But the problem is S_CTS_IMPALL  and S_CTS_IMPSGL authorization profile is not available in 000 client of quality system.
    Kindly give your valuable inputs as early as possible. the solution provided by anybody will be rewarded with points.
    Thanks&Regards
    Raju

    can you try assigning the below profiles to that ID.
    S_TMW_OPERA     
    Operator in CTS (All Transport Authorizations)
    S_CTS_ALL     
    Transport system: All authorizations
    S_CTS_DEVELO     
    WBO: Profile for developers in P systems (incl. tasks)
    I too have checked and i did not come across the profiles nor objects S_CTS_IMPALL and S_CTS_IMPSGL .
    Where did u get the message that they have to be imported ?
    Hope it helps.
    Award points for the replies that are helpful to you.
    Rgds,
    Sri

  • Web Template not impacted after query changed and Transported

    Hi. All.
                        We have modified the query and transported to production But query changes not been
    impacted on Standard web teplate. But it works fine in Bex Analyzer.
                       Issue is there was a description was truncated earlier we used initially as short description.
    Later we mapped to Medium description and modified the entire flow and loaded. It works fine.
                      Only in production we are not seeing correct description in web report and it works fine with Analyzer. So we need to ask the user as after executing the report he needs to change characterstic property from Standard to Medium.
    But it would be bit inconvenience to users.
                So how can we solve this problem and why the query changes are not impacting on Web template.
    Please provide your views on this issue.
    Thanks & Regards
    Vijay

    Hi Vijay,
    one reason might be if you use the option "personalization" within the web template. If users can personalize the templates changes will not be visible and have to be deleted at the time a new version of the query is provided. There are background tables for the personalization as well where you can delete all objects for this template at once if necessary.
    Brgds,
    Marcel

  • How do I get Backup Assistant to work on a Samsung SCH-u640? I can change the PIN, but I can't back-up (always says I entered the wrong PIN). This locks up the phone and is ruining the battery life!

    I can set a PIN for Backup Assistant.
    When Backup Assistant tries to run, it locks up and asks for the PIN.
    I enter the PIN, and it's rejected as incorrect.
    If I get a PIN reminder, it matches the PIN I entered!
    This is really bothersome -- I can't stop Backup Assistant from running, and it won't work properly.
    The result is the phone locks up until I manually close out of Backup Assistant.
    And the battery runs down pretty quickly.
    Yecch!
    Any ideas? Please advise. Thanks!

    Yecch is right! I'm sorry to see there have been issue with the Backup Assistant PIN. Can you recall when this started happening? Was there a PIN or phone change that happened prior to this happening?
    When you go to Media Center>Browse and Download>BackUp Assistant>Options do you see an option sot Upgrade Check? If there isn't an option for that, power the phone off/on and please try to access it again.
    Lastly, you should try to reset the application by following the steps here http://vz.to/1AHpMIo.
    Please let me know what happens.
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for