Aggregation tab missing

Hello,
i just began working with discoverer (OLAP plus), dont have much experience so far. My problem is, that i cannot find the "Aggregation tab" on the worksheet properties dialog page, it doesnt appear. Im searching for it, because my aggregations (simple sum-s) dont show on higher levels. I read somewhere that the "Show the sum of the values displayed in the contributing cells" checkbox could give me the solution, but i cannot acces to this without the missing page... Is there any registry key i can turn it on with?
In my pref.txt:
AggregationBehavior = 1
AllowAggregationOverRepeatedValues = 1
EnhancedAggregationStrategy = 1
The version of my discoverer is 10.1.2.48.18.
Your help would be appreciated!
Looking for your response,
Szilárd

I don't think there's an aggregation tab per se. Aggregates are calculations. You can use aggregating functions in a calculation you build yourself or you can total and subtotal on items using My Totals and following the prompts. It will depend on what you're trying to do. Be careful of creating aggregations yourself, as a combination of aggregated data and detail items can cause invalid results.

Similar Messages

  • Download manager and download tab missing in options box.

    The download manager and download tab missing in options box when I dropdown tool in menu bar.

    The default Firefox Options window doesn't have a separate tab for Downloads, those prefs are on the General tab below Startup.

  • Use of Aggregation tab in New formula in BEx quert designer

    Hi,
    I used the aggreagtion tab in setting up new formula for key figures. i selected the maximum and given particular charasterstic field and saved.
    when i looked in the output i cant see any difference.
    we are setting formula for key figures and its asking for charasterisic field i coulnt get clear idea about this.
    can any one tell me what is the use of this aggregation tab?
    In formula screen for the general tab  what ever the calculation i am doing there its working properly, only in the aggreation tab whatever i am setting only that is not working.
    Regards,
    Thanesh

    Hi Thanesh,
    Refernce characteristic field should be selected in relation to which the key figure is to be aggregated with the exception aggregation. Often this is a time characteristic. However, you can use any characteristic.
    Best Example
    If you want to count sales orders
    By giving COUNT of all values with refence charactersitc as Sales document, you will get the desired result.
    There are three aggregation options:
    ●      Minimum (MIN): The minimum value of all values displayed in this column is displayed in the results row.
    ●      Maximum (MAX): The maximum value of all values displayed in this column is displayed in the results row.
    ●      Summation (SUM): The sum of all values displayed in this column is displayed in the results row.
    Another Example :The key figure Number of Employees would, for example, be totaled using the characteristic Cost Center, and not a time characteristic. Here you would determine a time characteristic as an exception characteristic with, for example, the aggregation Last Value.
    Hope this helps
    Regards,
    Aparna

  • Itunes artwork tab missing for movies in version 11.1.3.8

    For some reason recently I am noticing the artwork tab missing when I import in a movie into my itunes directory.  This just started happening and the movie formats are exactly the same as ones which have the artwork tab available.  These are all MPEG-4 Video Files at 124 kbps.  Typical iTunes 'anomoly' but on this one I am baffled.  Anyone have a clue as to how to fix this?  I even tried completely removing the movie from the itunes file directory and then reimporting into iTunes but same issue.

    No need to scream at me.
    You can access the apps by clicking the iPad thingy on top right of the screen (when the iPad is connected) and then select Apps and scroll down to file sharing apps...
    Or....
    As I said....
    EXACT SAME WAY AS BEFORE

  • Boot Image properties...tabs missing

    I updated our SCCM system to R2 yesterday...today when I went in to edit a boot image I no longer see the "drivers" tab...it seems like there are other tabs missing as well, just can't remember.  Don't know how to add drivers to a boot image
    now.
    Server 2008 R2
    SCCM 2012 R2

    This is a common problem. It came up on the forum yesterday as well.
    http://social.technet.microsoft.com/Forums/en-US/a42ab116-63f1-431b-a42c-f31f2bdf0896/upgrade-to-sccm-r2-have-to-recreate-boot-image-and-ts?forum=configmanagergeneral
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • "last value" in the KF aggregation tab page

    can u plz tell me what is the meaning of "last value" in the KF aggregation tab page. also what is use of aggregation reference char. please give explaination with example.
    amit

    Hi
    Last value in KF Aggregation tab is
    For example Amount is the Key figure with values 100,200,300,400
    if u sekect last value
    it will display 400 in the entire amount column..........

  • Ssis data flow item and ssis control flow item tab missing in choose toolbox item from ssdt 2010

    ssis data flow item and ssis control flow item  tab missing in choose toolbox item from ssdt 2010

    I have the same problem.
     When i click on tools -> choose tools Items dialog box, Control Flow and Data Flow Tab are missing.
    I've just worked with SQL Server Data Tools and SQL Server 2012 and these tabs are not missing.
    i think this is a problem installing SQL Server.
    I've not yet  found a solution.

  • Use of Aggregation tab of key figure

    Hello Gurus ,
    Please tell me use of Aggregation tab of key figure , and where it affects ?

    hi,
    check the below links for aggregation and with examples..
    http://help.sap.com/saphelp_nw04s/helpdata/en/47/607899dcce6834e10000000a421937/frameset.htm
    To enable the calculation of key figures, the data from the InfoProvider has to be aggregated to the detail level of the query and formulas may also need to be calculated. The system has to aggregate using multiple characteristics. In regard to a selected characteristic, the system can aggregate with another rule for each key figure (exception aggregation).
    During aggregation, the OLAP Engine in BI proceeds as follows:
           1.      First, standard aggregation is executed. Possible aggregation types include summation (SUM), minimum (MIN) and maximum (MAX). Minimum and maximum can, for example, be used for date key figures.
           2.      Aggregation using a selected characteristic occurs after standard aggregation (exception aggregation). The available exception aggregation types include average, counter, first value, last value, minimum, maximum, no aggregation, standard deviation, summation, and variance. Application cases for exception aggregation include warehouse stock, for example, that cannot be totaled over time, or counters that count the number of characteristic values for a certain characteristic
    assign points if helpful
    regards
    vadlamudi

  • Acrobat 10 plugin tab missing from Outlook 2010 32 bit

    Acrobat 10 plugin tab missing from Outlook 2010 32 bit.
    Un-installed/re-installed Acrobat 10.1.7.27
    The PDF plug in is missing from Outlook COM add ins and Disabled add ins, confirmed that 7 .dll files were installed correctly in c:\program files (x86)\Adobe\Acrobat.com\Add-in
    Also tried re-registering the DLL and adding PDFMOfficeAddinn.dll to Outlook add-ins.
    Plug in tab is enabled and working in MS Word and Excel but not in Outlook 2010.

    [discussion moved to Creating, Editing & Exporting PDFs forum]

  • COMPLETLY FORM TAB MISSING

    Hi Expertes,
    What is Completley Form Tab missing in portal.What is form tab.
    Thanks
    nimmagadda

    Chakri,
    can you explain the scenario in detail
    Thanks
    Bala Duvvuri

  • Cube Aggregation tab hangs

    I have one particular cube definition that when I go into the aggregation tab the properties will not come up i.e. you just see the properties for the previous tab you were in.
    Has anyone else had this problem?

    Hi Mohann,
    That is Aggregation levels tab in multiprovider, this means;
    if you want to work on planning and you want to include those aggregation levels which are created in planning modeler, can be directly used to create a multiprovider.
    Aggregation levels:
    Chk the below site to know more abt aggregation level.
    http://help.sap.com/saphelp_nw70/helpdata/EN/43/1c3c7031b70701e10000000a422035/frameset.htm
    Hope your doubt clarified.........
    Rgds,
    Ravi

  • BI Content TAB Missing in RSA1

    I have installed BI Content 703 SP9 but the BI Content tab is missing in the RSA1

    a friend fixed it

  • "Arrangement" tab missing, can't display Macbook on HDTV

    Hello,
    I have a mini-DVI to HDMI adapter, an HDMI cable and an HDTV. I'm trying to hook up my Macbook to the HDTV, but I'm having trouble because the "Arrangment" tab is missing in the Display settings.
    The crazy thing is that I've successfully mirrored displays countless times before, with the same cables, Macbook, and HDTV. But one day the "Arrangement" tab decided not to show up, and I'm at the end of my rope trying to figure out what happened or what I did differently.
    The HDTV recognizes that the HDMI cable is plugged in, and the Macbook recognizes when it is connected to the TV as well, flashing blue when I plug or unplug the mini-DVI adapter. I've tried everything I can think of: restarting, unplugging everything and plugging it all back in, sleeping and waking the computer, trying to connect the Macbook while plugged in and while just running on the battery, turning everything off before disconnecting and reconnecting the cables - everything. No matter what I try, clicking "Detect Displays" still does nothing, my HDTV's screen remains blank, and the "Arrangement" tab remains absent.
    I've done everything short of buying new cables, which I don't want to do because I know that what I have works!
    Any suggestions? I've really missed watching things on my HDTV. Thanks for your time!

    After much fiddling with display resolutions and TV setting, and several calls to Apple help, problem was found to have a really basic solution: replace the RCA connector cable. The old one was shot.

  • Urgent Condition Tab Missing In  Stock Transfer Order

    Hi All ,
                When I a m creating Stock Transfer Order from One Plant In one Company Code to  Another Plant in another Company code the Invoice and Conditions Tab Is Missing .
    How to get the Conditions tab, Do I have to do any Customization ?
    Please suggest me of how to go about .....
    Regards ,
    Sriram.

    Hi Srirama,
    Yes, if you have only one Calculation schema then there is no meaning in assigning to different Porgs.
    In that case please proceed with the following configuration.
    This is done in customizing; IMG for MM > Purchasing>Conditions>Define Price Determination Process>Define Schema Determination>Determine Schema for Stock Transport Orders
    For the combination of the Schema POrg; doc.type( UB ) and Supplying plant
    you must specify the price schema to be used.
    Hope this will solve your problem.
    Regards,
    DilliB

  • Need Help: Web Analysis, Unable to retrieve the data & Security Tab missing

    Hi
    I'm new to Hyperion (our version: 9.2.1) and we're implementing Hyperion Planning. One of the reporting tools is Web Analysis.
    I'm trying to create simple grid reporting. but I'm unable to retrieve the data instead the result is "n/a"
    and
    The File's Properties > Security tab is missing
    Does anyone know my issue?
    Thanks,

    Hi Experts,
    You told its resolved.how?
    I am having the same issue i am unable to retrive the tables.
    "Database:MS SQL Server
    Driver :weblogic.jdbcx.sqlserver.SQLServerDataSource.
    Connection String:jdbc:weblogic:sqlserver://localhost:1433;databaseName=BAM"
    Please help if you have resolved this issue.Any helpful links plz forward [email protected]
    Thanks

Maybe you are looking for