Agile PLMA: MDS mapping table for BOM table

Hi,
I'm looking for BOM equivalent table in mds schema.
Currently OBIEE 10g is installed.
It would be really helpful, if you could share the entire schema mappings (Agile to MDS schema).
Thanks,
Prem.

Any hints on this would be highly appreciated.
Regards,
Prem.

Similar Messages

Partitioned IOT of Object Type - mapping table not allowed for bitmap index

Hi,
looks like a feature available for standard Partitioned IOTs is not supported for object based tables, namely the MAPPING TABLE construct to support secondary local bitmap indexes.
Can you confirm behaviour is as expected/documented?
If so, is a fix/enhancement to support mapping table for object-based Partitioned IOTs in the pipeline?
Results for partition-wise load using pipelined table function are very good, look-ups across tens of millions of rows are excellent.
Environment = Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
OS = Oracle Enterprise Linux Server release 5.2 (Carthage) 2.6.18 92.el5 (32-bit)
Here's the potted test-case...
1) First the non object based Partitioned IOT - data is range-partitioned across the alphabet
CREATE TABLE IOT_Table (
textData VARCHAR2(10),
numberData NUMBER(10,0),
CONSTRAINT IOT_Table_PK PRIMARY KEY(textData))
ORGANIZATION INDEX MAPPING TABLE PCTFREE 0 TABLESPACE Firewire
PARTITION BY RANGE (textData)
(PARTITION Text_Part_A VALUES LESS THAN ('B') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_B VALUES LESS THAN ('C') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_C VALUES LESS THAN ('D') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_D VALUES LESS THAN ('E') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_E VALUES LESS THAN ('F') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_F VALUES LESS THAN ('G') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_G VALUES LESS THAN ('H') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_H VALUES LESS THAN ('I') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_I VALUES LESS THAN ('J') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_J VALUES LESS THAN ('K') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_K VALUES LESS THAN ('L') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_L VALUES LESS THAN ('M') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_M VALUES LESS THAN ('N') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_N VALUES LESS THAN ('O') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_O VALUES LESS THAN ('P') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_P VALUES LESS THAN ('Q') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Q VALUES LESS THAN ('R') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_R VALUES LESS THAN ('S') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_S VALUES LESS THAN ('T') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_T VALUES LESS THAN ('U') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_U VALUES LESS THAN ('V') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_V VALUES LESS THAN ('W') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_W VALUES LESS THAN ('X') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_X VALUES LESS THAN ('Y') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Y VALUES LESS THAN ('Z') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Z VALUES LESS THAN (MAXVALUE) PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0))
NOLOGGING PARALLEL -- FLASHBACK ARCHIVE IOT_Flashback_Data
SQL> table IOT_TABLE created.
2) Create the local secondary bitmap index utilising the underlying mapping table
CREATE BITMAP INDEX IOT_Table_BMI1 ON IOT_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL;
SQL> bitmap index IOT_TABLE_BMI1 created.
3) Quick test to confirm all ok
SQL> INSERT INTO IOT_Table VALUES ('ABC123',100);
SQL> 1 rows inserted.
SQL> SELECT * FROM IOT_Table;
TEXTDATA NUMBERDATA
ABC123     100
4) Now create a minimal object type to use as the template for object table
CREATE TYPE IOT_type AS OBJECT
textData VARCHAR2(10 CHAR),
numberData NUMBER(10,0)
) FINAL
SQL> TYPE IOT_type compiled
5) Attempt to create an object-based range partitioned IOT, including MAPPING TABLE clause as per step (1)
CREATE TABLE IOTObj_Table OF IOT_type (textData PRIMARY KEY)
OBJECT IDENTIFIER IS PRIMARY KEY ORGANIZATION INDEX
MAPPING TABLE -- we'd like to use this feature to enable use of Bitmap Indexes...
PCTFREE 0 TABLESPACE Firewire
PARTITION BY RANGE (textData)
(PARTITION Text_Part_A VALUES LESS THAN ('B') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_B VALUES LESS THAN ('C') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_C VALUES LESS THAN ('D') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_D VALUES LESS THAN ('E') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_E VALUES LESS THAN ('F') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_F VALUES LESS THAN ('G') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_G VALUES LESS THAN ('H') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_H VALUES LESS THAN ('I') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_I VALUES LESS THAN ('J') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_J VALUES LESS THAN ('K') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_K VALUES LESS THAN ('L') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_L VALUES LESS THAN ('M') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_M VALUES LESS THAN ('N') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_N VALUES LESS THAN ('O') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_O VALUES LESS THAN ('P') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_P VALUES LESS THAN ('Q') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Q VALUES LESS THAN ('R') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_R VALUES LESS THAN ('S') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_S VALUES LESS THAN ('T') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_T VALUES LESS THAN ('U') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_U VALUES LESS THAN ('V') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_V VALUES LESS THAN ('W') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_W VALUES LESS THAN ('X') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_X VALUES LESS THAN ('Y') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Y VALUES LESS THAN ('Z') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Z VALUES LESS THAN (MAXVALUE) PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0))
NOLOGGING PARALLEL -- FLASHBACK ARCHIVE IOT_Flashback_Data
This errors out with the following...
SQL Error: ORA-25182: feature not currently available for index-organized tables
25182. 00000 - "feature not currently available for index-organized tables"
*Cause:    An attempt was made to use one or more of the following feature(s) not
currently supported for index-organized tables:
CREATE TABLE with LOB/BFILE/VARRAY columns,
partitioning/PARALLEL/CREATE TABLE AS SELECT options,
ALTER TABLE with ADD/MODIFY column options, CREATE INDEX
*Action:   Do not use the disallowed feature(s) in this release.
6) Re-running the create table statement in step 5 without the MAPPING TABLE clause works fine. Not surprisingly an attempt to create a secondary local bitmap index on this table fails as there's no mapping table, like so...
CREATE BITMAP INDEX IOTObj_Table_BMI1 ON IOTObj_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL;
CREATE TABLE with LOB/BFILE/VARRAY columns,
partitioning/PARALLEL/CREATE TABLE AS SELECT options,
ALTER TABLE with ADD/MODIFY column options, CREATE INDEX
*Action:   Do not use the disallowed feature(s) in this release.
CREATE BITMAP INDEX IOTObj_Table_BMI1 ON IOTObj_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL
Error at Command Line:99 Column:13
Error report:
SQL Error: ORA-00903: invalid table name
00903. 00000 - "invalid table name"
7) Creating a secondary local b-tree index is fine, like so...
SQL> CREATE INDEX IOTObj_Table_I1 ON IOTObj_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL;
index IOTOBJ_TABLE_I1 created.
8) A quick test to ensure object table ok...
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('DEF456',500));
SQL> 1 rows inserted.
SQL> SELECT * FROM IOTObj_Table;
TEXTDATA NUMBERDATA
DEF456     500

Thanks Dan,
the intention is to range partition based on the initial character, so A* -> Text_Part_A, B* -> Text_Part_B, and so on.
Here's an example, using an empty IOTObj_Table as created previously.
1) Set up & confirm some test data (two 'D's, one 'N', and two 'Z's)
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('DEF456',500));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('DDD111',510));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('N3000',515));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('ZZ1212',520));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('Z111X',530));
SQL> COMMIT;
SQL> SELECT * FROM IOTObj_Table;
TEXTDATA NUMBERDATA
DDD111     510
DEF456     500
N3000     515
Z111X     530
ZZ1212     520
2) Just to prove our IOT is enforcing the Primary Key based on the TextData attribute, try to insert a duplicate
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('Z111X',530));
Error starting at line 141 in command:
INSERT INTO IOTObj_Table VALUES (IOT_Type('Z111X',530))
Error report:
SQL Error: ORA-00001: unique constraint (OCDataSystems.SYS_IOT_TOP_84235) violated
00001. 00000 - "unique constraint (%s.%s) violated"
*Cause:    An UPDATE or INSERT statement attempted to insert a duplicate key.
For Trusted Oracle configured in DBMS MAC mode, you may see
this message if a duplicate entry exists at a different level.
*Action:   Either remove the unique restriction or do not insert the key.
3) Now confirm that our data has been slotted into the range-based partition we expect using the PARTITION clause of SELECT...
- The two 'D's...
SQL> SELECT * FROM IOTObj_Table PARTITION (Text_Part_D);
TEXTDATA NUMBERDATA
DDD111     510
DEF456     500
- The single 'N'...
SQL> SELECT * FROM IOTObj_Table PARTITION (Text_Part_N);
TEXTDATA NUMBERDATA
N3000     515
- The two 'Z's...
SQL> SELECT * FROM IOTObj_Table PARTITION (Text_Part_Z);
TEXTDATA NUMBERDATA
Z111X     530
ZZ1212     520
4) And to wrap up confirm an empty partition
SELECT * FROM IOTObj_Table PARTITION (Text_Part_W);

More than 1 line items in bdc using table controls for BOM

Hi....
how do u update more than one line item for BOM using BDC table control.......
is there any specific command for doing that.......
hav tried d following code bt it takes the flatfile i/p FOR 2 LINE ITEMS as 2 different BOM'S.....
would appreciate ur help....plz provide code.............
REPORT zbdc4_cs01
       NO STANDARD PAGE HEADING LINE-SIZE 255.
INCLUDE bdcrecx1.
DATA : a TYPE i,
       b type i,
       c type i.
DATA : BEGIN OF it_rec OCCURS 0,
       rec(200) TYPE c,
       END OF it_rec.
DATA : BEGIN OF ctab OCCURS 0,
       matnr(18),
       werks(4),
       stlan(1),
       END OF ctab.
DATA : BEGIN OF xtab OCCURS 0,
       idnrk(18),
       menge(13),
       postp(1),
       END OF xtab.
DATA : BEGIN OF itab OCCURS 0,
       matnr(18),
       werks(4),
       stlan(1),
       idnrk(18),
       menge(13),
       postp(1),
       END OF itab.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename            = 'C:/TEST4.TXT'
      filetype            = 'ASC'
      has_field_separator = 'X'
    TABLES
      data_tab            = it_rec.
LOOP AT it_rec.
    a = strlen( it_rec-rec ).
    if a = 55.
    itab-matnr = it_rec-rec+0(18).
    itab-werks = it_rec-rec+18(4).
    itab-stlan = it_rec-rec+22(1).
    itab-idnrk = it_rec-rec+23(18).
    itab-menge = it_rec-rec+41(13).
    itab-postp = it_rec-rec+54(1).
    APPEND itab.
    elseif a > 55.
    itab-matnr = it_rec-rec+0(18).
    itab-werks = it_rec-rec+18(4).
    itab-stlan = it_rec-rec+22(1).
    itab-idnrk = it_rec-rec+23(18).
    itab-menge = it_rec-rec+41(13).
    itab-postp = it_rec-rec+54(1).
    APPEND itab.
    itab-idnrk = it_rec-rec+55(18).
    itab-menge = it_rec-rec+73(13).
    itab-postp = it_rec-rec+86(1).
    APPEND itab.
    endif.
ENDLOOP.
PERFORM open_group.
LOOP AT itab.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29N-STLAN'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RC29N-MATNR'
                                   itab-matnr.           "'3000000107'.
    PERFORM bdc_field       USING 'RC29N-WERKS'
                                   itab-werks.              "'UN02'.
    PERFORM bdc_field       USING 'RC29N-STLAN'
                                   itab-stlan.              "'1'.
    PERFORM bdc_field       USING 'RC29N-STLAL'
    PERFORM bdc_field       USING 'RC29N-DATUV'
                                  '11.08.2008'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0110'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RC29K-BMENG'
                                  '1'.
    PERFORM bdc_field       USING 'RC29K-STLST'
                                  '1'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29K-EXSTL'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0111'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29K-LABOR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0140'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POSTP(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RC29P-IDNRK(01)'
                                   itab-idnrk.             "'1000000232'.
    PERFORM bdc_field       USING 'RC29P-MENGE(01)'
                                   itab-menge.              "'100'.
    PERFORM bdc_field       USING 'RC29P-POSTP(01)'
                                   itab-postp.             "'L'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0130'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POSNR'.
    PERFORM bdc_field       USING 'RC29P-POSNR'
                                  '0010'.
    PERFORM bdc_field       USING 'RC29P-IDNRK'
                                  '1000000232'.
    PERFORM bdc_field       USING 'RC29P-MENGE'
                                  '100'.
    PERFORM bdc_field       USING 'RC29P-MEINS'
                                  'KG'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0131'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POTX1'.
    PERFORM bdc_field       USING 'RC29P-SANKA'
                                  'X'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0140'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POSNR(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPLCSDI' '0140'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RC29P-POSNR(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=FCBU'.
    PERFORM bdc_transaction USING 'CS01'.
ENDLOOP.
PERFORM close_group.

Hi
Check this sample code for the Table Control in BDC:
data: fnam(20) type c.
move 1 to id.
    loop at TI_STAGING WHERE VENDOR = IT_STAGING-VENDOR AND DOCDATE = IT_STAGING-DOCDATE.
      concatenate 'RM06E-EPSTP(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-itmcategory.
      concatenate 'EKPO-KNTTP(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-accassignment.
      concatenate 'EKPO-EMATN(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-material.
      concatenate 'EKPO-TXZ01(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-shortxt.
      quan = ti_staging-poqty.
      concatenate 'EKPO-MENGE(0' id ')' into fnam.
      perform bdc_field       using fnam quan.
      concatenate 'RM06E-EEIND(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-deliverydate.
      netpr = ti_staging-netpr.
      concatenate 'EKPO-NETPR(0' id ')' into fnam.
      perform bdc_field       using fnam netpr.
      concatenate 'EKPO-MATKL(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-mategroup.
      concatenate 'EKPO-WERKS(0' id ')' into fnam.
      perform bdc_field       using fnam TI_STAGING-plant.
      ID = ID + 1.
    ENDLOOP.
Regards,
Vishwa.

Mapping table for contact person download from ECC and Groupware

There are 3 connected system in our landscape:
- CRM
- Groupware (connected to CRM)
- ECC
We have a requirement that the Contact Person can be created in any of the above 3 system and should flow to the other. So, the below scenarios are valid in our case:
1. Contact created in Groupware, flows to CRM ->ECC
2. Contact created in ECC flows to CRM-> Groupware
3. Contact created in CRM flows to Groupware and ECC
Our flow system works fine and the contacts created in one system, flows to the other 3 and any changes also flow.
The problem is that for the contacts created in ECC, the communication data (phone, email etc) flow in CRM and get updated in the "Work Address" section in the Contact display screen in Web UI and the updates from Groupware for communication data gets updated in "Main Address" section.
Can anyone please advise what are the mapping tables for the address update when the contact is created in :
- Groupware/CRM
- ECC
Regards

Hi Christophe,
Thanks for the response.
I checked for the notes you suggested, but having read it it doesnt appear to address my problem. Did you get this from SAP as fix to solve' specify the name of contact person' error in SMW01 ? Unfortunately even SAP isnt replying to me on this.
I am also not getting any dump, all my queues are getting cleared in ECC and CRM. My error remains 'specify the name of contact person'. Interestingly when i tried to push the contact person directly as bupa_main..it too failed with the same error..more interestingly whenver my contact person tried to get replicated as bupa_rel..ecc does eat up a number assignment..but no record is created for it in ecc...the smw01 says partiaslly send ..receivers has error..
Edited by: Hamed Kazi on Apr 19, 2011 2:33 AM

Mapping table for the hierarchies in bw & R3

Hello,
We have a requirement of createing a mapping table for the hierarchies of one of the BW-object and the corresponding R/3-Hierarchies.
sturucture on table should be as given below,
BW-Hierarchy Name | R/3- Hierarchy Name | Frequency of loading |
please advice.
Thanks
NM

Hi,
Product Group is master data for material master. It is part of Matreial Clssification data in R/3.
Please check if you are having the same already loaded as attribute of Material master. I guess it will be there, if it s not there then you should try to load the same in material master object which you are using in all the cubes.
If the maintinenece in master data is nopt possible then you got to populate the same in cube.
There will be a combination of keys (materail/plant/prduct family etc.. ( for which Product group will be unique). then load product with the help of these key combinations in all the cubes via update routine.
There is one more way to have this but which is performance intensive.
You may create one master data object called Product Group and keep material number as attribute (with compunding all other key fileds to get the unique combination). Then you may create an infoset using cubes and this master data object. Join the materail numbers in all. Display this object in report.
I hope it will help.
Thanks,
S

Tables for BOM Header and Components

Dear Friends,
Please let me know which tables provide a link between the header Material and corresponding Component Materials of a BOM?
I have seen STKO and STPO but couldn't find such a link in them. STPO gives the component material but I couldn't get any link to Header material.
Regards,
Alok.

Hello Alok,
Table for BOM header - STKO
Table for BOM item - STPO
Table for material to BOM link - MAST
Check if MARC table has a material in it and the same material is available in MAST also, it means that BOM has been created for that material..
If Material is available in MARC and not available in MAST, it means BOM has not been created for that material.
Reward Points, if useful.
Regards,
Nitin.

Validation for loaded mapping tables

Hi
As I know FDM doesn't validate maps imported from the file. If there is any way to do a validation for these maps? May be using any Event script?

Hi Tushar,
   I see following benifits in storing mapping tables on R3 -
   1. R3 being the bigger system, you will have more information available for mapping in R3. E.g. if a mapping depends on some attribute of data like "material type" you have that information avialable in R3 whereas you need to have a process to pull this information into Biztalk from R3 and keep it in sync.
   2. You can reuse the mapping logic for other interfaces if coded correctly, e.g. function modules for mapping.
   3. Tomorrow if biztalk is replaced with XI, there is less impact because you need not worry about mapping logic which is alreay there in R3.
Lastly I don't see any real reason why it should have an y impact on upgrade because you are going to use tables in customer name range. It only increases the number of tables in customer name range. Usually people calculate the cost of an upgrade based on level of customization done in the system and that is genrally linked to number of objects in customer name range. But If think pragmatically there is no impact on upgrade cost because these kind of customization do not affect upgrade.
Cheers,
Sanjeev

Url mapping table for webdispatcher

I want to use a URL mapping table for the webdispatcher. I found that the paramater wdisp/url_map_location can be used to point at a file://<path>.
But I donot find any information about the layout of this file.

Hi Geert,
As far as i read,
URL mapping table
Mapping of the path part that is specified in the browser to the information about the server (groups).
You can determine, for example, that all requests that contain the path prefix /sap/bc are only processed by the servers that process logon group GROUP_1.
text quoted from SAP Library.
As far as i know you can achieve the mapping you mentioned above using DNS
Regards
Juan
Please reward with points if helpful

Need Table for BOM selection with qunatity

Hi experts,
I'm unable to get the table for Alternate BOM, BOM component and Component qty in one table. Plz help me if any body having idea about this inform me.
Thanking you,
Narendra

Hi,
Please find below tables for BOM
                      STKO                    BOM - header
     STPO                    BOM - item
     STAS                    BOMs - Item Selection
     STPN                    BOMs - follow-up control
     STPU                    BOM - sub-item
     STZU                    Permanent BOM data
     PLMZ                    Allocation of BOM - items to operations
     MAST                    Material to BOM link
     KDST                    Sales order to BOM link
I think use MAST,STKO ,STPO for your use
Regards
SANIL

Import conversion data table from SAP R/3 into value mapping table in XI

Hi:
    Somebody knows how to import a table with conversion data that are in SAP R/3 and to take it to a value mapping table in XI?
    The purpose is to use a mapping table that can change in the future. Must I use a ABAP programming that retrieve data and build the value mapping table?
    If so, how I specify in the ABAP programming the group id, the scheme, the agency and the corresponding value?
    Please, help me.
    Regards!!!

Hi David,
please refer to this section in the help: http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
There is an interface for mass replication of mapping data. The steps you need to carry out to use this are:
+Activities
To implement a value-mapping replication scenario, proceed as follows:
       1.      Register the Java (inbound) proxies.
To do so, call the following URLs in the following order in your Internet browser:
¡        http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication (for the asynchronous replication scenario)
¡ http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicationSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&method=valueMappingReplicationSynchronous (for the synchronous replication scenario)
You only need to perform this step once (for each installation).
       2.      Application programming
The ABAP program must perform the following tasks:
¡        Read the value mapping data from the external table
¡        Call the outbound proxy used to transfer the data to a message, which is then sent to the Integration Server
       3.      Configuration of the replication scenario in the Integration Directory
This involves creating all the configuration objects you need to execute the scenario successfully. One special aspect of the value-mapping replication scenario is that the receiver is predefined (it must be on the Integration Server). The sender, however, is not predefined in the replication scenario and can be defined to meet your individual requirements.
For example, you can use the shipped ABAP proxies.
In the case of the receiver communication channel, choose the adapter type XI. Ensure that you configure a channel for the Java proxy receiver in this case.
Enter the path prefix /MessagingSystem/receive/JPR/XI for this purpose.
+
Regards
Christine

MDM API to read the Record Key Mapping table

Hi,
Does anybody know what class/method I can use to read the Record Key Mapping table?
For the Business Partner table the Key Mapping table has this columns:
Default / MDM Partner ID / Remote System / Key
I have everything but the Key. How can I read it?
Thanks in advance,
Diego.

GetKey Mapping is one of the available Web Services as of SP4.
Else you could use the Java API to get the Key Mapping.
CatalogData class has the following method
GetKeyMapping
public java.lang.String[][] GetKeyMapping(java.lang.String agency,
 java.lang.String table,
 int[] recordIDs,
 boolean isDefaultKeyOnly)
 throws StringExceptionRetrieves the key mapping for each record.
Parameters:
agency - the agency name.
table - the table name.
recordIDs - the list of records.
isDefaultKeyOnly - True to retrieve only the default value, False to all key values.
Returns: the key values for each record.

Lookup value mapping table through message mapping.

Hello All,
I am working on a graphical mapping (message mapping). When trying to map the source message to the target message, I need to find out it a particular key exists in the value mapping table. Depending on the result, I need to map different source fields to the target field.
Is there any inbuilt function which will allow me to do a lookup on a value mapping table, or is it possible to lookup a value mapping table from a UDF?
Please help!
Warm Regards,
Keerti

Hi,
Please see the below links for Value mapping ..
Value mapping /people/sukumar.natarajan/blog/2006/10/23/accessing-value-mapping-defined-in-directory-using-java-functions
Value mapping in XSLT /people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
Value Mapping replication - /people/sreekanth.babu2/blog/2005/02/23/value-mapping-replication
Also see
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
/people/community.user/blog/2007/01/08/valuemapping-using-the-graphical-mapping-tool
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
Regards
Pradeep N

How create a Value Mapping Table in XI 3.0?

Hi:
    I wish make a single sample scenario where receiving data must be converted according to convertion table:
01 -
       Legacy A | Legacy B -
M
             Male:              01     |    M
             Female:            02     |    F
And I don´t know how build it. Must I create anything in Integration Repository? (any special message mapping or function?).
Anyone know about weblog where explain step by step for "value mapping group" and "value mapping tables" creation?
Help me please.
Regards!!
David.

Hi David,
You can create value mapping tables in Integration Directory.
First you have to create Value mapping group using menu Object>new>Value mapping Group
to Display value mapping you have to use Tools--> Value mapping.
Also refer to following link on help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/content.htm
In IR Graphical mapping tool, use the standard function Conversions-->Value mapping.
Hope this helps.
Rgds,
Sam Raju
Message was edited by: Sam Raju
Message was edited by: Sam Raju

How to put identical target value in value mapping table

Hi all ,
         I am implementing a value mapping function .Problem is occuring for repetated target value.for ex: if key is GL001 GL002 GL003 and destination value is 4 5 4 then its creating problem for identical values i.e for both GL001 & GLOO3 its not accepting 4 .Same manner for many diffrent glncode i have identical values.not understanding how to deal with these identical values please guide me as its very urgent.
Regards,
Saurabh

Hi saurabh,
you can try this out....
First you create a value mapping table in ID like:
AWSYS   GLNCODE
GLOO1     10
GLOO2     20
(without GLOO3).
now in your message mapping do the following mapping:
                          Contant[GLOO1]
                               |
                               |(then)
AWSYS-------------> equals---->if----------------->Value Mapping---->GLNCODE
                    |          |(else)
                    |          |
Constant[GLOO3]-----|        AWSYS
**Reward points if helpful...
--Sankar Choudhury

Issue with Value Mapping table

Hi
I want to upload a external value mapping table to XI.
I do not want to code for it on the SAP R/3 side. and there might be more than 2000 value mappings. so can we upload a external mapping table.
Is it possible?? if yes, then how??.
Thanks
Nikhil

XI 3.0
Hi,
first of all one helpful information:
You can see all data of the value mapping tables using the
runtime workbench: Go to the IntegrationBuilder->
Integration Monitoring->Cache Monitoring, select 'Search
for Value-Mapping' and choose your context.
The value mapping tables are located in the J2EE part of
XI. You have to send your value mapping data to an Java proxy
located in the J2EE part. First, the inbound proxies
(synchronous and asynchronous) need to be activated.
There are two urls, named in the docu, you have to call
from a web browser:
(asynchronous replication scenario)
http://<Server>:<Port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicationSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&method=valueMappingReplicationSynchronous
(synchronous replication scenario)
http://<Server>:<Port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication
You only need to perform this step once (for each
installation).
If you already have a sender for the mapping data, the
next step is to configure the scenario in the directory
Create a communication channel with
Adapter type: XI
Transport protocol: HTTP 1.0
Message-Protocol: XI 3.0
Adapter-Engine: Integration Server
and host name and http port of the XI J2EE Engine and Path Prefix: /MessagingSystem/receive/JPR/XI
The user XIAPPLUSER has the required permissions.
For an asynchronous communication you can use the
inbound interface ValueMappingReplication from the namespace http://sap.com/xi/XI/System.
In that namespace there are also outbound interfaces you
can use to generate a sender proxy and synchronous
interfaces for the same purpose. Set the created communication channel as the receiver channel.
You may need a mapping and so on depending on your
sender. If you use the provided outbound interfaces there
is no mapping required.
The Data:
You can create your own GUIDs using some function like GUID_CREATE in ABAP. You don't need to declare the context you use. Something like http://mycompany.com/Test should be ok.
A sample in ABAP:
CRM and R3 are the names of the business systems.
data: lcl_value_mapping type ref to co_svmr_value_mapping_rep,
 ls_value_mappings type svmr_value_mapping_replication,
 ls_item type svmr_value_mapping_rep_item,
 lcl_system_fault type ref to cx_ai_system_fault.
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123548'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'FormOfAddress'.
ls_item-identifier-agency = 'CRM'. <- Business System A
ls_item-identifier-value = '2'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
ls_item-operation = 'Insert'.
Use the same guid for another value of the same group
ls_item-group_id = '315286378563858425463215845123548'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'FormOfAddress'.
ls_item-identifier-agency = 'R3'. <- Business System B
ls_item-identifier-value = '1'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
create object lcl_value_mapping.
try.
 call method lcl_value_mapping->execute_asynchronous
 exporting
 output = ls_value_mappings.
 commit work.
 catch cx_ai_system_fault into lcl_system_fault.
 write: 'Error: ', lcl_system_fault->errortext.
endtry.
See the XI documentation at SAP XI Design and Configuration Time -> Configuration -> Value Mapping -> Value mapping Replication for Mass Data.
Hope that helps.
Regards,
Christian

Agile PLMA: MDS mapping table for BOM table

Similar Messages

Maybe you are looking for