Aging report by Revenue type
Hi all gurus,
Can some one tell me how to produce Aging reports by Revenue type such as fuel surcharge, freight, etc...
Thank you,
SONY
You may have to create an infoset through SQ02 on table BSID which is for open items of customers. Play around with the dates fields to arrive at aging. assign the infoset to a user group. Then create a query through SQ01 after getting into the user group. You may search the forum for how to create a query.
You may not find the due date readily, however you can build a formula either in the query or create an additional field in the infoset to derive the due date based on the baseline date and the terms of payment infomation available in this table itself.
Similar Messages
-
Vendor ageing report data for all doc type needed(urgent)
hello everyone
once again i need ur help guys.
in the vendor ageing report i am getting data for only one document type and not of other.
ex- see i have two documents type-
1.KD 2. EJ
so i am getting data for document type KD only.
so how to get the data of document type EJ along with KD.
below is my code .
so tell what modifications i have to made .
*& Report Z_VENDOR AGEING *
*& in this repoet I am calculating the vendor ageing
which is depending on formula
AGEING = Current Date(or any date entered by user) Bline Date(BSIK-ZFBDT) *
REPORT z_vendor NO STANDARD PAGE HEADING
LINE-SIZE 200
LINE-COUNT 65(3).
TABLES : bsik.
DATA : BEGIN OF t_out OCCURS 0,
bukrs LIKE bsik-bukrs,
saknr LIKE bsik-saknr,
bldat LIKE bsik-bldat,
wrbtr LIKE bsik-wrbtr,
lifnr LIKE bsik-lifnr,
zfbdt like bsik-zfbdt,
zbd1t like bsik-zbd1t,
ageing type i,
END OF t_out.
parameters : p_date1 type d.
SELECT-OPTIONS : s_bukrs FOR bsik-bukrs,
s_saknr FOR bsik-saknr,
s_lifnr FOR bsik-lifnr.
SELECT bukrs saknr bldat wrbtr lifnr zfbdt zbd1t
FROM bsik
INTO TABLE t_out
WHERE saknr IN s_saknr
AND bukrs IN s_bukrs
AND lifnr IN s_lifnr.
Loop at t_out.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
i_datum_bis = p_date1
i_datum_von = t_out-zfbdt
I_KZ_EXCL_VON = '0'
I_KZ_INCL_BIS = '0'
I_KZ_ULT_BIS = ' '
I_KZ_ULT_VON = ' '
I_STGMETH = '0'
I_SZBMETH = '1'
IMPORTING
E_TAGE = t_out-ageing
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Modify t_out.
Clear t_out.
Endloop.
LOOP AT T_OUT.
IF T_OUT-SHKZG = H.
T_OUT-WRBTR = T_OUT-WRBTR * -1.
T_OUT-WRBTR = T_OUT-DMBTR * -1.
ENDIF.
DATA: TOTAL(16) TYPE P DECIMALS 2.
TOTAL = TOTAL + T_OUT-DMBTR.
Endloop.
LOOP AT t_out.
WRITE : / t_out-saknr,
t_out-lifnr,
t_out-wrbtr,
t_out-zfbdt,
T_OUT-DMBTR,
t_out-ageing.
AT LAST.
WRITE:/ TOTAL.
CLEAR TOTAL.
ENDAT.
ENDLOOP.
Message was edited by: sanjeev singhSanjeev,
Can you tell what is document type EJ representing...Secondly, if you check couple of documents of EJ type and check if data is available as per you WHERE clause filters.
Regards
Anurag -
Customer Aging Report(without reconciled transaction)-what types of documents are considered?
Hi Friends,
As per my knowledge,Customer Aging Report consider only those documents(ar invoice,ar downpayment,incoming payment-payment on a/c,ar credit memo) which are open and showing balance due and standalone JE against Customer.
As I cross checked,I found those standalone JE where Customer and round off account are considered as debit,credit are not considered by 'Customer Aging report'.
So,I just want to know what are all the logic based on which SAP B1 standard report 'Customer Aging ' (without reconciled transaction ) consider the documents????Which SAP B1 Version and Patch is under use at your end ?
There were issues in SAP B1 regarding reconcilliations in versions prior to 2007 series.
Samir Gandhi -
Can using query create aging report for GL Account
Hi all expert,
I have a challenge scenario which customer request print out aging report for the following GL Account.
This is not a business partner account. However, customer want display like aging report.
30 days aging report for the following GL accounts by projects:-
i) WIP (Work In Progress) account
ii) Accrued Revenue account
iii) Accrued Cost account
Examples:
Current Balance 30 day 60 day 90 day 120 day
Account WIP 10000 2000 3000 5000 0
Any idea or example given? If yes, can you provide a query here?
Regards,
Eric TanHi Eric
In standard SAP Business One this is difficult as the reports are 2 dimensional. To achieve this you will need to write multiple select statements into a temporary table and then select the final result from the temp table. Here is a sample for you to test:
USE [*DATABASE_NAME*]
GO
/****** Object: StoredProcedure [dbo].[REPORT_NAME] Script Date: 04/24/2009 13:17:21 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE proc [dbo].[*REPORT_NAME*]
as
set nocount on
begin
DECLARE @Day_no varchar(2)
DECLARE @Month_no varchar(2)
DECLARE @Year_no varchar(4)
DECLARE @Start_Date Datetime
SET @Day_no = DAY(GetDate())
SET @Month_no = MONTH(GetDate())
SET @Year_no = YEAR(GetDate())
SET @Start_Date = @Year_No + '/' + @Month_no + '/' + @Day_no -- + '/' + @Year_No
IF OBJECT_ID(N'tempdb..#CRDAGEING', N'U') IS NOT NULL
drop table #CRDAGEING
SELECT T0.[CardCode] AS [CardCode], T0.[CardName] AS [CardName], -T0.[Balance] AS [Balance], CAST(0 AS MONEY) AS [Current], CAST(0 AS MONEY) AS [1Week], CAST(0 AS MONEY) AS [2Weeks], CAST(0 AS MONEY) AS [3Weeks], CAST(0 AS MONEY) AS [4Weeks], CAST(0 AS MONEY) AS [5Weeks], CAST(0 AS MONEY) AS [6Weeks], CAST(0 AS MONEY) AS [Over6Weeks], CAST(0 AS MONEY) AS [Avg3Months], CAST (0 AS MONEY) AS [Onhand] INTO #CRDAGEING FROM OCRD T0 WHERE T0.[CardType] = 'S' -- and T0.[CardCode] <> '' --and T0.[DocDate] >= @FromDate AND T0.[DocDate] <= @ToDate
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] <= @Start_Date GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] >= DATEADD(DAY,1,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,8,@Start_Date) GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,8,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,15,@Start_Date) GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,15,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,22,@Start_Date) GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,22,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,29,@Start_Date) GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,29,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,36,@Start_Date) GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,36,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,43,@Start_Date) GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,43,@Start_Date) GROUP BY T1.[ShortName]
SELECT SR.[CardCode], MAX(SR.[CardName]), SUM(SR.[Balance]) AS [BalanceOwing], SUM(SR.[Current]) AS [Current], SUM(SR.[1Week]) AS [1Week], SUM(SR.[2Weeks]) AS [2Weeks], SUM(SR.[3Weeks]) AS [3Weeks], SUM(SR.[4Weeks]) AS [4Weeks], SUM(SR.[5Weeks]) AS [5Weeks], SUM(SR.[6Weeks]) AS [6Weeks], SUM(SR.[Over6Weeks]) AS [Over6Weeks] FROM dbo.#CRDAGEING SR GROUP BY SR.[CardCode] ORDER BY SR.[CardCode]
END
Go to Microsoft SQL Studio manager and select your company database. Then expand the list and select Programmability > Stored Procedures. Right click on Stored Procedures and select New Stored Procedure. Copy the above code over the code in the edit window and change the database name as well as report name. Then select Execute to create the stored procedure. If you make changes, remember to change the word CREATE to ALTER (with other words CREATE for the first execute, and ALTER thereafter). Then in SAP Business One create a new query and leave everything blank. Click on execute and select the pencil to change to edit mode. Remove the words SELECT and type in EXEC REPORT_NAME (change the REPORT_NAME to the name you used in SQL). Then execute again and the results will be displayed in SAP Business One.
Let me know if you get stuck. Remember the above is an example and will need to be changed to use your tables and fields as required. The basic idea is to move across by one column with each select statement. So for example the first select statement does the CURRENT column, the second one the 30DAYS column, and so on.
Kind regards
Peter Juby -
Hi All
i am trying to get a legitimate vendor Aging report from within SAP
The 2 reports that I am currently looking at are:
S_ALR_87012085 - Vendor Payment History with OI Sorted List
S_ALR_87012084 - Open Items - Vendor Due Date Forecast
But both these do not bring out the output the way i want it - and i tried changing the output control and it still doesnt bring out the report as i want it - I want a report like the S_ALR_87012178 for customers, with output control 1, 6 and a 0 - which gives me a logical list of the aged customers.
Is there one like this for vendors too? Any suggestions?
Thank you
RukshanaHi Ruksaana,
You can customize the vendor report to show the items overdue per vendor by using the following steps
1. Create a form using T Code - FKI4
In this form ( two-axis structure) provide the details for each column as per your Client requirement - Due from 0 - 30 days
etc. You can create a column (using formula method) at the end by adding the previous columns, this will give you total
amount of overdue items for each vendor
2. Create a report using T Code - FKI1
Based on the Form created in the above step. Make additional selections based on client requirements like document type,
company code, account type, currency etc. Execute the report.
The following link will give provides detail steps for the creation of the aforementioned form and report.
Re: AR aging report (summary by customer)
Hope this helps.
- Sadha. -
hi I am developing a aging report for which I am getting fields from the tables EKPO and EKKO based on
s_gjahr FOR bsid-gjahr OBLIGATORY. "Document Fiscal year
p_date TYPE vbak-aedat OBLIGATORY, "A/P Open items
p_bukrs TYPE t001-bukrs OBLIGATORY. "Company
s_ekorg FOR mepo1222-ekorg OBLIGATORY, "Purchasing Organization
s_ekgrp FOR mepo1222-ekgrp, "Purchasing group
s_zterm FOR bseg-zterm, "Terms
s_ebeln FOR bseg-ebeln, "Purchase order
s_hkont FOR bseg-hkont, "Reconciliation Account.
s_blart FOR invfo-blart OBLIGATORY, "Document type
s_date FOR bseg-zfbdt NO-DISPLAY.
SELECT * FROM ekko INTO TABLE tbl_ekko WHERE bukrs = p_bukrs
AND zterm IN s_zterm
AND ekorg IN s_ekorg
AND ekgrp IN s_ekgrp.
IF tbl_ekko[] IS NOT INITIAL.
SELECT * FROM ekpo INTO TABLE tbl_ekpo FOR ALL ENTRIES IN tbl_ekko
WHERE ebeln = tbl_ekko-ebeln
AND bukrs = p_bukrs
AND repos = 'X'
AND werks IN s_werks. "additonal.
ENDIF.
Now my problem is I need to combine the data I have selected from EKKO with a table which has EBELN, I found BSIK but that doesnt have the EBELN field filled.
Can you tell me some table other than BSEG ( performace issue ) which I can use to select my entries with Inner join... only BSIK has BLART not BSEG..
I will definitely award points for all the helpful answersHi
U need to read the EKBE table here you should fine the FI invoices linked to PO
Max -
This report has been extended from an existing query that has been posted on this forum.
This report is an aging report for ALL trasnactions, both open and closed.
Is it possible to modify this query to report on OPEN / unreconciled trasnactions only?
select T0.shortname,T2.cardcode 'Customer Code',T2.cardname 'Name',T2.U_BU, T2.U_DEPT, sysdeb 'Debit Amount',syscred 'Credit Amount',
case T0.transtype
when '13' then 'INV'
when '14' then 'AR CN'
when '24' then 'INCOMING'
else 'Other'
end 'Type',
T1.BaseRef'Trans #',
case T0.transtype
when '13' then
(Select Comments from OINV where OINV.Transid=T1.Transid)
else '-'
end 'Inv.Rem.',
(Select SeriesName From NNM1 Where Series=T1.DocSeries and ObjectCode=T0.TransType)'Series',
T0.Ref1,
fccurrency 'BP Currency',
CONVERT(VARCHAR(10), T0.refdate, 103)'Posting Date' ,
CONVERT(VARCHAR(10), T0.duedate, 103) 'Due Date',
CONVERT(VARCHAR(10), T0.taxdate, 103) 'Doc Date' ,
CASE
when (DATEDIFF(dd,T0.refdate,current_timestamp))+1 < 31
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "0-30 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 30
and (datediff(dd,T0.refdate,current_timestamp))+1< 61)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "31 to 60 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 60
and (datediff(dd,T0.refdate,current_timestamp))+1< 91)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "61 to 90 days",
CASE
when (DATEDIFF(dd,T0.refdate,current_timestamp))+1 > 90
then
case
when syscred= 0 then sysdeb
when sysdeb= 0 then syscred * - 1
end
end "90 + days"
from JDT1 T0
Inner Join OJDT T1 On T1.TransId=T0.TransId
left outer join
OCRD T2 ON T2.cardcode =T0.shortname where
T2.cardtype = 'c' and T0.intrnmatch = '0' and
T2.U_Bu = %0and T2.U_Dept = %1
ORDER BY T2.CARDCODE, T0.taxdate
Thanks in advanced LisaThanks for the feedback Jule - I have changed the query as is as below
Unfortunately, the query is still reporting ALL transactions not just unreconciled transations.
Would be grateful for any assistance.
Cheers Lisa
select T0.shortname,T2.cardcode 'Customer Code',T2.cardname 'Name',T2.U_BU, T2.U_DEPT, balscdeb 'Debit Amount',balsccred 'Credit Amount',
case T0.transtype
when '13' then 'INV'
when '14' then 'AR CN'
when '24' then 'INCOMING'
else 'Other'
end 'Type',
T1.BaseRef'Trans #',
case T0.transtype
when '13' then
(Select Comments from OINV where OINV.Transid=T1.Transid)
else '-'
end 'Inv.Rem.',
(Select SeriesName From NNM1 Where Series=T1.DocSeries and ObjectCode=T0.TransType)'Series',
T0.Ref1,
fccurrency 'BP Currency',
CONVERT(VARCHAR(10), T0.refdate, 103)'Posting Date' ,
CONVERT(VARCHAR(10), T0.duedate, 103) 'Due Date',
CONVERT(VARCHAR(10), T0.taxdate, 103) 'Doc Date' ,
CASE
when (DATEDIFF(dd,T0.refdate,current_timestamp))+1 < 31
then
case
when balsccred <> 0 then balsccred * - 1
else balscdeb
end
end "0-30 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 30
and (datediff(dd,T0.refdate,current_timestamp))+1< 61)
then
case
when balsccred <> 0 then balsccred * - 1
else balscdeb
end
end "31 to 60 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 60
and (datediff(dd,T0.refdate,current_timestamp))+1< 91)
then
case
when balsccred <> 0 then balsccred * - 1
else balscdeb
end
end "61 to 90 days",
CASE
when (DATEDIFF(dd,T0.refdate,current_timestamp))+1 > 90
then
case
when balsccred= 0 then balscdeb
when balscdeb= 0 then balsccred * - 1
end
end "90 + days"
from JDT1 T0
Inner Join OJDT T1 On T1.TransId=T0.TransId
left outer join
OCRD T2 ON T2.cardcode =T0.shortname where
T2.cardtype = 'c' and
T2.U_Bu = [%0]and T2.U_Dept = [%1]
ORDER BY T2.CARDCODE, T0.taxdate -
Dunning Letter Design & Aging report
Hello Experts,
I have a few doubts in B1 Sales AR -> Dunning and Aging Reports.
1. How do we incorporate our own letter format for dunning letters? I looked for PLD's, but nothing was available in the print preview screen.
2. When we execute Customer Receivables Aging report, what is the significance of the column "Future Remit"? In our B1 instance, the receivables that are due 60 or 90 days from current date are not appearing in their respective columns.
Please advise on how to proceed
With Regards,
PS: We are running B1 2005-B / MS-SQL 2005Hi Kaatss,
You should be able to find the Dunning letter formats by clicking on the layout designer button and then from the windows selecting the dunning letter formats from the 'Choose Document Type'. They go by the ID of DUN0... DUN09.
As for the columns the 60 and 90 columns show the invoices (values) that are overdue by 60 and 90 days respectively.
The Future Remit column shows invoices that are still within the due date. So if you raise two invoice with 60 and 90 day payment terms, but they are still within their due date, their values will appear in the future remit column.
I hope this helps. I use 2005A so I hope there are no differences.
Damian -
I need a code for VENDOR AGEING REPORT
plz help me i am in urgent need of source code of
VENDOR AGEING REPORT.
if any body help me regarding this above report i will be
great ful to him/her.
bcoz deadline is today.
i need ur urgent help, i treid very much but i failed,
so hope help from anybody there.REPORT zvender_os NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65.
Tables
TABLES: bsik, "open items (A/C: Secondary Index for Customers)
lfa1, "customer master
lfb1,
rf140, "temp stru (Work Fields for Corrence(SAPF140*))
bsak, "cleared items (A/c Secnd Index for Cust(Clrms))
skat.
constants and variables
TYPE-POOLS: slis.
DATA: fieldcat TYPE slis_t_fieldcat_alv,
fieldcat1 TYPE slis_t_fieldcat_alv,
fieldcat_ln TYPE slis_fieldcat_alv,
layout_in TYPE slis_layout_alv,
layout_in1 TYPE slis_layout_alv,
sortcat TYPE slis_t_sortinfo_alv,
sortcat1 TYPE slis_t_sortinfo_alv,
sortcat_ln LIKE LINE OF sortcat,
eventcat1 TYPE slis_t_event,
eventcat TYPE slis_t_event,
eventcat_ln LIKE LINE OF eventcat,
col_pos TYPE i.
DATA: targ_month(2) TYPE n, "0001
targ_year(4) TYPE n, "0001
targ_mth_abs TYPE p, "0001
doc_month(2) TYPE n, "0001
doc_year(4) TYPE n, "0001
doc_mth_abs TYPE p, "0001
mth_result TYPE p, "0001
doc_days TYPE p,
targ_days TYPE p,
addl_days TYPE p,
ext_days TYPE p,
v_days(3) TYPE c,
v_kkber LIKE knkk-kkber.
DATA:
BEGIN OF inrec OCCURS 1000, "0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
shkzg LIKE bsik-shkzg,
dmbtr LIKE bsik-dmbtr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
zbd2t LIKE bsik-zbd2t,
zbd3t LIKE bsik-zbd3t,
zuonr LIKE bsik-zuonr,
END OF inrec.
DATA:
BEGIN OF inrect OCCURS 1000, "0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
shkzg LIKE bsik-shkzg,
dmbtr LIKE bsik-dmbtr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
zbd2t LIKE bsik-zbd2t,
zbd3t LIKE bsik-zbd3t,
zuonr LIKE bsik-zuonr,
END OF inrect,
BEGIN OF t_item OCCURS 1000, " 0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
zfbdt LIKE bsik-zfbdt,
dmbtr LIKE bsik-dmbtr,
days(3) TYPE c,
zuonr LIKE bsik-zuonr,
END OF t_item,
t_line LIKE t_item OCCURS 1000 WITH HEADER LINE, " 0001
BEGIN OF itab OCCURS 1000,
lifnr LIKE lfa1-lifnr,
total LIKE bsik-dmbtr,
zfuture LIKE bsik-dmbtr,
zcurrent LIKE bsik-dmbtr,
crbal LIKE bsik-dmbtr,
30days LIKE bsik-dmbtr,
60days LIKE bsik-dmbtr,
90days LIKE bsik-dmbtr,
99days LIKE bsik-dmbtr,
120days LIKE bsik-dmbtr,
180days LIKE bsik-dmbtr,
365days LIKE bsik-dmbtr,
bzirk LIKE knvv-bzirk,
vkbur LIKE knvv-vkbur,
vwerk LIKE knvv-vwerk,
vkgrp LIKE knvv-vkgrp,
klimk LIKE knkk-klimk,
cashd LIKE knkk-cashd,
grupp LIKE knkk-grupp,
erdat LIKE lfa1-erdat,
name1 LIKE lfa1-name1,
name2 LIKE lfa1-name2,
stras LIKE lfa1-stras,
ort01 LIKE lfa1-ort01,
telf1 LIKE lfa1-telf1,
psort(10),
sperr LIKE lfa1-sperr,
totsal LIKE bsik-dmbtr,
txt50 LIKE skat-txt50,
gsber LIKE bsik-gsber,
END OF itab.
DATA: sel_tab TYPE TABLE OF rsparams WITH HEADER LINE,
p_debit(1) TYPE c,
p_credit(1) TYPE c.
DATA: t_variant LIKE disvariant OCCURS 0 WITH HEADER LINE.
parameters and select-options
SELECTION-SCREEN BEGIN OF BLOCK blck0 WITH FRAME TITLE text-002.
PARAMETERS: stida LIKE sy-datum DEFAULT sy-datum OBLIGATORY,
p_bukrs LIKE t001-bukrs DEFAULT 'PIIL' MEMORY ID buk
OBLIGATORY.
P_BUKRS LIKE T001-BUKRS DEFAULT 'CC01' OBLIGATORY. "0003
SELECT-OPTIONS: s_lifnr FOR bsik-lifnr ,
s_vkbur FOR knvv-vkbur,
s_vkgrp FOR knvv-vkgrp,
s_bzirk FOR knvv-bzirk,
s_konda FOR knvv-konda,
s_kdgrp FOR knvv-kdgrp NO-DISPLAY ,
s_kvgr2 FOR knvv-kvgr2 NO-DISPLAY ,
s_kkber FOR knkk-kkber NO-DISPLAY ,
s_grupp FOR knkk-grupp NO-DISPLAY ,
s_ctlpc FOR knkk-ctlpc,
s_akont FOR lfb1-akont,
s_gsber FOR bsik-gsber.
PARAMETERS: p_future AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blck0.
SELECTION-SCREEN BEGIN OF BLOCK blck1 WITH FRAME TITLE text-002.
PARAMETERS: p_abs RADIOBUTTON GROUP zrad,
p_due RADIOBUTTON GROUP zrad DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blck1.
*SELECTION-SCREEN BEGIN OF BLOCK blck2 WITH FRAME TITLE text-003.
*PARAMETERS: c_run RADIOBUTTON GROUP zrac DEFAULT 'X',
c_blk RADIOBUTTON GROUP zrac,
c_all RADIOBUTTON GROUP zrac.
*SELECTION-SCREEN END OF BLOCK blck2.
*SELECTION-SCREEN BEGIN OF BLOCK blck3 WITH FRAME TITLE text-004.
*PARAMETERS: p_debit AS CHECKBOX DEFAULT 'X' ,
p_credit AS CHECKBOX DEFAULT 'X' NO-DISPLAY,
*selection-screen end of block blck3.
start-of-selection.
START-OF-SELECTION.
PERFORM BUILD_EVENTCAT.
p_debit = 'X'.
p_credit = 'X'.
PERFORM get_customer_invoices.
filter records based on selection criteria
PERFORM filter_records.
END-OF-SELECTION.
PERFORM add_sort_field.
PERFORM modify_field.
PERFORM write_report.
*& Form FILTER_RECORDS
To collect all the required data from DB and store them in
internal table.
--> p1 text
<-- p2 text
FORM filter_records.
delete records based on selection criteria
LOOP AT itab.
SELECT vkbur vkgrp vwerk erdat konda kdgrp bzirk kvgr2
INTO (itab-vkbur, itab-vkgrp, itab-vwerk, knvv-erdat,
knvv-konda, knvv-kdgrp,itab-bzirk,knvv-kvgr2)
FROM knvv WHERE lifnr = itab-lifnr
ORDER BY erdat DESCENDING.
AKS :- Not Required for PI
CASE itab-vkbur.
WHEN 'SA1'.
itab-vkbur = 'SF25'.
WHEN 'QLD1'.
itab-vkbur = 'SF23'.
WHEN 'WA1'.
itab-vkbur = 'SF26'.
ENDCASE.
AKS.
EXIT.
ENDSELECT.
IF itab-vkbur IN s_vkbur AND
itab-vkgrp IN s_vkgrp AND
knvv-konda IN s_konda AND
knvv-kdgrp IN s_kdgrp AND
itab-bzirk IN s_bzirk AND
knvv-kvgr2 IN s_kvgr2.
ELSE.
DELETE itab.
CONTINUE.
ENDIF.
SELECT SINGLE klimk grupp cashd
INTO (itab-klimk, itab-grupp, itab-cashd)
FROM knkk WHERE lifnr = itab-lifnr
AND kkber IN s_kkber
AND ctlpc IN s_ctlpc
AND grupp IN s_grupp.
IF SY-SUBRC NE 0.
DELETE ITAB.
CONTINUE.
ENDIF.
SELECT SINGLE skat~txt50
INTO (itab-txt50)
FROM lfb1 INNER JOIN skat
ON lfb1akont EQ skatsaknr
WHERE lfb1~lifnr = itab-lifnr
AND lfb1~akont IN s_akont
AND skat~spras EQ 'EN'.
IF sy-subrc NE 0.
DELETE itab.
CONTINUE.
ENDIF.
SELECT SINGLE name1 name2 telf1 erdat stras ort01 sperr
INTO (itab-name1, itab-name2, itab-telf1,
itab-erdat, itab-stras, itab-ort01, itab-sperr )
FROM lfa1
WHERE lifnr = itab-lifnr
IF sy-subrc NE 0 .
DELETE itab.
CONTINUE.
ENDIF.
AKS For Filteration of Customer base on Block Area.
IF c_all NE 'X'.
IF c_run EQ 'X' AND itab-sperr EQ 'X'.
DELETE itab.
CONTINUE.
ELSE.
IF c_blk EQ 'X' AND itab-sperr NE 'X'.
DELETE itab.
CONTINUE.
ENDIF.
ENDIF.
ENDIF.
MODIFY itab.
ENDLOOP.
ENDFORM. " FILTER_RECORDS
*& Form GET_CUSTOMER_INVOICES
text
--> p1 text
<-- p2 text
FORM get_customer_invoices.
DATA:ztotcre LIKE bsik-dmbtr.
DATA:ztotsal LIKE bsik-dmbtr.
DATA: fsdate LIKE sy-datum.
DATA: l_perio(4) TYPE c.
MOVE stida TO rf140-stida.
MOVE rf140-stida+4(2) TO targ_month.
MOVE rf140-stida+0(4) TO targ_year.
MOVE rf140-stida+6(2) TO targ_days.
targ_mth_abs = ( targ_year * 12 ) + targ_month.
CALL FUNCTION 'ZGET_PERIOD_FROM_DATE'
EXPORTING
i_date = stida
IMPORTING
e_perio = l_perio.
CONCATENATE l_perio '0401' INTO fsdate.
select open items.
IF p_due EQ 'X'.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt " 0001
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsik INTO TABLE inrect
WHERE bukrs = p_bukrs
AND budat LE stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
AND umskz NE 'T'
AND umskz NE 'F'
AND umskz NE 'R'
AND umskz NE 'P'
AND umskz NE 'J'
AND umskz NE 'L'.
LOOP AT INREC.
IF INREC-SHKZG = 'H'.
INREC-DMBTR = INREC-DMBTR * -1.
ENDIF.
MOVE-CORRESPONDING INREC TO T_ITEM. " 0001
PERFORM COLLECT_INVOICE USING INREC-lifnr INREC-DMBTR
INREC-ZFBDT INREC-ZBD1T
INREC-ZBD2T INREC-ZBD3T.
APPEND T_ITEM.
CLEAR T_ITEM.
ENDLOOP.
LOOP AT inrect.
inrec-lifnr = inrect-lifnr.
inrec-belnr = inrect-belnr.
inrec-gjahr = inrect-gjahr.
inrec-bldat = inrect-bldat.
inrec-xblnr = inrect-xblnr.
inrec-blart = inrect-blart.
inrec-sgtxt = inrect-sgtxt.
inrec-shkzg = inrect-shkzg.
inrec-dmbtr = inrect-dmbtr.
CALL FUNCTION 'NJ_CAL_DATE_IN_INTERVAL'
EXPORTING
date = inrect-zfbdt
days = inrect-zbd1t
months = 00
signum = '+'
years = 00
IMPORTING
calc_date = inrec-zfbdt.
inrec-zbd1t = inrect-zbd1t.
inrec-zbd2t = inrect-zbd2t.
inrec-zbd3t = inrect-zbd3t.
inrec-zuonr = inrect-zuonr.
APPEND inrec.
CLEAR inrec.
ENDLOOP.
ELSE.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt " 0001
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsik INTO TABLE inrec
WHERE bukrs = p_bukrs
AND budat LE stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
AND umskz NE 'T'
AND umskz NE 'F'
AND umskz NE 'R'
AND umskz NE 'P'
AND umskz NE 'J'
AND umskz NE 'L'.
ENDIF.
SORT inrec BY lifnr shkzg zfbdt .
LOOP AT inrec.
AT NEW lifnr.
For Customers Credit Balance Transaction to be display in Report
End of Credit Balance
ztotcre = 0.
ztotsal = 0.
ENDAT.
IF inrec-shkzg = 'H'.
inrec-dmbtr = inrec-dmbtr * -1.
ztotcre = ztotcre + inrec-dmbtr.
ELSE.
IF inrec-blart = 'RV'.
IF inrec-bldat GE fsdate.
ztotsal = ztotsal + inrec-dmbtr.
ENDIF.
ENDIF.
ztotcre = ztotcre + inrec-dmbtr.
endif.
IF p_debit EQ 'X'.
IF ztotcre > 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
ENDIF.
ENDIF.
ENDIF.
IF p_credit EQ 'X'.
AT END OF lifnr.
IF ztotcre < 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
APPEND t_item.
CLEAR t_item.
ENDIF.
ENDAT.
ENDIF.
ENDLOOP.
select cleared items
IF p_due EQ 'X'.
REFRESH inrect. CLEAR inrect.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsak INTO TABLE inrect
WHERE bukrs = p_bukrs
AND budat LE stida
AND augdt > stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
REFRESH inrec. CLEAR inrec.
LOOP AT inrect.
inrec-lifnr = inrect-lifnr.
inrec-belnr = inrect-belnr.
inrec-gjahr = inrect-gjahr.
inrec-bldat = inrect-bldat.
inrec-xblnr = inrect-xblnr.
inrec-blart = inrect-blart.
inrec-sgtxt = inrect-sgtxt.
inrec-shkzg = inrect-shkzg.
inrec-dmbtr = inrect-dmbtr.
CALL FUNCTION 'NJ_CAL_DATE_IN_INTERVAL'
EXPORTING
date = inrect-zfbdt
days = inrect-zbd1t
months = 00
signum = '+'
years = 00
IMPORTING
calc_date = inrec-zfbdt.
inrec-zbd1t = inrect-zbd1t.
inrec-zbd2t = inrect-zbd2t.
inrec-zbd3t = inrect-zbd3t.
inrec-zuonr = inrect-zuonr.
APPEND inrec.
CLEAR inrec.
ENDLOOP.
ELSE.
REFRESH inrec. CLEAR inrec.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsak INTO TABLE inrec
WHERE bukrs = p_bukrs
AND budat LE stida
AND augdt > stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
ENDIF.
SORT inrec BY lifnr shkzg zfbdt .
LOOP AT inrec.
AT NEW lifnr.
ztotcre = 0.
ztotsal = 0.
ENDAT.
IF inrec-shkzg = 'H'.
inrec-dmbtr = inrec-dmbtr * -1.
ztotcre = ztotcre + inrec-dmbtr.
ELSE.
IF inrec-blart = 'RV'.
IF inrec-bldat GE fsdate.
ztotsal = ztotsal + inrec-dmbtr.
ENDIF.
ENDIF.
ztotcre = ztotcre + inrec-dmbtr.
endif.
IF p_debit EQ 'X'.
IF ztotcre > 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
ENDIF.
ENDIF.
ENDIF.
IF p_credit EQ 'X'.
AT END OF lifnr.
IF ztotcre < 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
APPEND t_item.
CLEAR t_item.
ENDIF.
ENDAT. " 0001
ENDIF.
ENDLOOP.
ENDFORM. " GET_CUSTOMER_INVOICES
*& Form COLLECT_INVOICE
text
-->P_bsik_lifnr text
-->P_bsik_DMBTR text
-->P_bsik_ZFBDT text
-->P_bsik_ZFBDT1 text
-->P_bsik_ZFBDT2 text
-->P_bsik_ZFBDT3 text
FORM collect_invoice USING pp_lifnr
pp_dmbtr
pp_zfbdt
pp_zbd1t
pp_zbd2t
pp_zbd3t
pp_ztotsal.
doc_month = pp_zfbdt+4(2).
doc_year = pp_zfbdt+0(4).
doc_mth_abs = ( doc_year * 12 ) + doc_month.
mth_result = ( targ_mth_abs - doc_mth_abs ).
logic given by Mr. Ashok Singhvi
doc_days = pp_zfbdt+6(2).
addl_days = ( doc_days - targ_days ).
IF addl_days <= 0.
ADD 1 TO mth_result.
ENDIF.
IF NOT pp_zbd3t IS INITIAL.
MOVE pp_zbd3t TO ext_days.
ELSEIF NOT pp_zbd2t IS INITIAL.
MOVE pp_zbd2t TO ext_days.
ELSEIF NOT pp_zbd1t IS INITIAL.
MOVE pp_zbd1t TO ext_days.
ELSE.
CLEAR ext_days.
ENDIF.
CHECK with Andrew whether this is working or not
if extended payment terms exist, subtract no of mths from mth_result
IF NOT ext_days IS INITIAL.
CASE ext_days.
WHEN 30.
SUBTRACT 1 FROM mth_result.
WHEN 60.
SUBTRACT 2 FROM mth_result.
WHEN 90.
SUBTRACT 3 FROM mth_result.
WHEN 120.
SUBTRACT 4 FROM mth_result.
ENDCASE.
ENDIF.
change to key date
IF pp_dmbtr > 0.
IF p_future = 'X'. " 0001
IF mth_result <= 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ELSE.
IF mth_result < 0.
itab-zfuture = pp_dmbtr.
t_item-days = 'FUT'.
ELSEIF mth_result = 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ENDIF. " 0001
itab-crbal = 0.
itab-total = pp_dmbtr.
ELSE.
IF p_future = 'X'. " 0001
IF mth_result <= 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ELSE.
IF mth_result < 0.
itab-zfuture = pp_dmbtr.
t_item-days = 'FUT'.
ELSEIF mth_result = 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ENDIF. " 0001
itab-total = pp_dmbtr.
itab-crbal = 0.
ENDIF.
itab-lifnr = pp_lifnr.
itab-totsal = pp_ztotsal.
COLLECT itab.
CLEAR itab.
ENDFORM. " COLLECT_INVOICE
*& Form ADD_SORT_FIELD
text
--> p1 text
<-- p2 text
FORM add_sort_field.
DATA: l_amount(9) TYPE n.
IF p_future = 'X'.
LOOP AT itab.
l_amount = 999999999.
IF itab-365days > 0.
l_amount = l_amount - itab-365days.
CONCATENATE 'A' l_amount INTO itab-psort.
ELSEIF itab-180days > 0.
l_amount = l_amount - itab-180days.
CONCATENATE 'B' l_amount INTO itab-psort.
ELSEIF itab-120days > 0.
l_amount = l_amount - itab-120days.
CONCATENATE 'C' l_amount INTO itab-psort.
ELSEIF itab-99days > 0.
l_amount = l_amount - itab-99days.
CONCATENATE 'D' l_amount INTO itab-psort.
ELSEIF itab-90days > 0.
l_amount = l_amount - itab-90days.
CONCATENATE 'E' l_amount INTO itab-psort.
ELSEIF itab-60days > 0.
l_amount = l_amount - itab-60days.
CONCATENATE 'F' l_amount INTO itab-psort.
ELSEIF itab-30days > 0.
l_amount = l_amount - itab-30days.
CONCATENATE 'G' l_amount INTO itab-psort.
ELSEIF itab-zcurrent > 0.
l_amount = l_amount - itab-zcurrent.
CONCATENATE 'H' l_amount INTO itab-psort.
ELSEif itab-zfuture > 0.
L_AMOUNT = L_AMOUNT - ITAB-zfuture.
CONCATENATE 'F' L_AMOUNT INTO ITAB-PSORT.
ELSE.
l_amount = ABS( itab-total ).
CONCATENATE 'I' l_amount INTO itab-psort.
ENDIF.
MODIFY itab.
ENDLOOP.
ELSE.
LOOP AT itab.
l_amount = 999999999.
IF itab-365days > 0.
l_amount = l_amount - itab-365days.
CONCATENATE 'A' l_amount INTO itab-psort.
ELSEIF itab-180days > 0.
l_amount = l_amount - itab-180days.
CONCATENATE 'B' l_amount INTO itab-psort.
ELSEIF itab-120days > 0.
l_amount = l_amount - itab-120days.
CONCATENATE 'C' l_amount INTO itab-psort.
ELSEIF itab-99days > 0.
l_amount = l_amount - itab-99days.
CONCATENATE 'D' l_amount INTO itab-psort.
ELSEIF itab-90days > 0.
l_amount = l_amount - itab-90days.
CONCATENATE 'E' l_amount INTO itab-psort.
ELSEIF itab-60days > 0.
l_amount = l_amount - itab-60days.
CONCATENATE 'F' l_amount INTO itab-psort.
ELSEIF itab-30days > 0.
l_amount = l_amount - itab-30days.
CONCATENATE 'G' l_amount INTO itab-psort.
ELSEIF itab-zcurrent > 0.
l_amount = l_amount - itab-zcurrent.
CONCATENATE 'H' l_amount INTO itab-psort.
ELSEIF itab-zfuture > 0.
l_amount = l_amount - itab-zfuture.
CONCATENATE 'I' l_amount INTO itab-psort.
ELSE.
l_amount = ABS( itab-total ).
CONCATENATE 'J' l_amount INTO itab-psort.
ENDIF.
MODIFY itab.
ENDLOOP.
ENDIF.
ENDFORM. " ADD_SORT_FIELD
*& Form WRITE_REPORT
text
--> p1 text
<-- p2 text
FORM write_report.
PERFORM build_fieldcat.
PERFORM build_sortcat.
PERFORM build_eventcat.
PERFORM build_layout.
PERFORM start_list_viewer.
ENDFORM. " WRITE_REPORT
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
FORM build_fieldcat.
lifnr
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'LIFNR'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
APPEND fieldcat_ln TO fieldcat.
Name1
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'NAME1'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'Name'.
APPEND fieldcat_ln TO fieldcat.
City Details
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'ORT01'.
fieldcat_ln-seltext_l = 'City'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Credit Limit
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNKK'.
fieldcat_ln-fieldname = 'KLIMK'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
APPEND fieldcat_ln TO fieldcat.
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'CRBAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-seltext_l = 'Cr. Bal.'.
fieldcat_ln-seltext_m = 'Cr. Bal.'.
fieldcat_ln-seltext_s = 'Cr. Bal.'.
APPEND fieldcat_ln TO fieldcat.
Total Amount
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-fieldname = 'TOTAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-seltext_l = 'Out.St.Amt.'.
fieldcat_ln-seltext_m = 'Out.St.Amt.'.
fieldcat_ln-seltext_s = 'Out.St.Amt.'.
fieldcat_ln-ref_tabname = 'zbsik'.
fieldcat_ln-ref_fieldname = 'ZDMBTR'.
APPEND fieldcat_ln TO fieldcat.
IF p_future NE 'X'.
Future
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'ZFUTURE'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Future Due'.
fieldcat_ln-seltext_m = 'Future Due'.
fieldcat_ln-seltext_s = 'Future Due'.
APPEND fieldcat_ln TO fieldcat.
ENDIF.
Current
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'ZCURRENT'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Normal Due'.
fieldcat_ln-seltext_m = 'Normal Due'.
fieldcat_ln-seltext_s = 'Normal Due'.
APPEND fieldcat_ln TO fieldcat.
30 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '30DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '0-30 Days'.
fieldcat_ln-seltext_m = '0-30 Days'.
fieldcat_ln-seltext_s = '0-30 Days'.
APPEND fieldcat_ln TO fieldcat.
60 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '60DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '31-60 Days'.
fieldcat_ln-seltext_m = '31-60 Days'.
fieldcat_ln-seltext_s = '31-60 Days'.
APPEND fieldcat_ln TO fieldcat.
90 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '90DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '61-90 Days'.
fieldcat_ln-seltext_m = '61-90 Days'.
fieldcat_ln-seltext_s = '61-90 Days'.
APPEND fieldcat_ln TO fieldcat.
99 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '99DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '91-120 Days'.
fieldcat_ln-seltext_m = '91-120 Days'.
fieldcat_ln-seltext_s = '91-120 Days'.
APPEND fieldcat_ln TO fieldcat.
*120Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '120DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '121-180 Days'.
fieldcat_ln-seltext_m = '121-180 Days'.
fieldcat_ln-seltext_s = '121-180 Days'.
APPEND fieldcat_ln TO fieldcat.
*180 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '180DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '181-365 Days'.
fieldcat_ln-seltext_m = '181-365 Days'.
fieldcat_ln-seltext_s = '181-365 Days'.
APPEND fieldcat_ln TO fieldcat.
*365 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '365DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '>365 Days'.
fieldcat_ln-seltext_m = '>365 Days'.
fieldcat_ln-seltext_s = '>365 Days'.
APPEND fieldcat_ln TO fieldcat.
Last Payment Date
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNKK'.
fieldcat_ln-fieldname = 'CASHD'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Street Name
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'STRAS'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Telephone
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'TELF1'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Credit Group
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'KNKK'.
FIELDCAT_LN-FIELDNAME = 'GRUPP'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
*Sales District
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'BZIRK'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'S_Distt'.
fieldcat_ln-seltext_m = 'S_Distt'.
fieldcat_ln-seltext_s = 'S_Distt'.
APPEND fieldcat_ln TO fieldcat.
Sales Office
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'VKBUR'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'S_Off'.
fieldcat_ln-seltext_m = 'S_Off'.
fieldcat_ln-seltext_s = 'S_Off'.
APPEND fieldcat_ln TO fieldcat.
Cust Creat Date
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'ERDAT'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT. -
Regarding standard aging reports
Hi Experts/Gurus
I need the standard reports for customer aging report and vendor aging report.
Need immediate replies.
Your answers can be rewarded with good points.
Regards,
kumarREPORT zfi_customer_ageing
NO STANDARD PAGE HEADING
LINE-COUNT 58
line-size 168
MESSAGE-ID zh_msg.
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: kna1, " Customer Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Customer Open Items Data
DATA: BEGIN OF int_bsid OCCURS 0,
kunnr LIKE bsid-kunnr, " Customer Number
name1 LIKE kna1-name1, " Customer Name
shkzg LIKE bsid-shkzg, " Dr/Cr Indicator
belnr LIKE bsid-belnr, " Document Number
xblnr LIKE bsid-xblnr, " Ref Doc No
blart LIKE bsid-blart, " Document Type
zfbdt LIKE bsid-zfbdt, " Base Line Date
zbd1t LIKE bsid-zbd1t, " Due date1
zbd2t LIKE bsid-zbd2t, " Due Date2
zbd3t LIKE bsid-zbd3t, " Due Date3
waers LIKE bsid-waers, " Currency
dmbtr LIKE bsid-dmbtr, " Amount in Local Curr
END OF int_bsid.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
kunnr LIKE bsid-kunnr, " Customer Number
name1 LIKE kna1-name1, " Customer Name
total1 LIKE bsid-dmbtr, " Amount in Local Curr
total2 LIKE bsid-dmbtr, " Amount in Local Curr
total3 LIKE bsid-dmbtr, " Amount in Local Curr
total4 LIKE bsid-dmbtr, " Amount in Local Curr
total5 LIKE bsid-dmbtr, " Amount in Local Curr
total6 LIKE bsid-dmbtr, " Amount in Local Curr
total LIKE bsid-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsid-dmbtr, " Amount Totals
v_gtotal2 LIKE bsid-dmbtr, " Amount Totals
v_gtotal3 LIKE bsid-dmbtr, " Amount Totals
v_gtotal4 LIKE bsid-dmbtr, " Amount Totals
v_gtotal5 LIKE bsid-dmbtr, " Amount Totals
v_gtotal6 LIKE bsid-dmbtr, " Amount Totals
v_gtotal LIKE bsid-dmbtr, " Amount Totals
v_subtotal1 LIKE bsid-dmbtr, " Amount Totals
v_subtotal2 LIKE bsid-dmbtr, " Amount Totals
v_subtotal3 LIKE bsid-dmbtr, " Amount Totals
v_subtotal4 LIKE bsid-dmbtr, " Amount Totals
v_subtotal5 LIKE bsid-dmbtr, " Amount Totals
v_subtotal6 LIKE bsid-dmbtr, " Amount Totals
v_subtotal LIKE bsid-dmbtr, " Amount Totals
v_date LIKE bsid-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE SY-LISEL, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsid-zfbdt, " Date Range 1
r_date2 FOR bsid-zfbdt, " Date Range 2
r_date3 FOR bsid-zfbdt, " Date Range 3
r_date4 FOR bsid-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_kunnr FOR kna1-kunnr. "Customer account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Customer Code
CLEAR kna1-kunnr.
SELECT kunnr UP TO 1 ROWS
INTO kna1-kunnr
FROM kna1
WHERE kunnr IN s_kunnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Invalid Customer Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 1 greater'(004)
'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 2 greater'(006)
'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
MESSAGE e999 WITH 'Column 3 greater'(008)
'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Customer Open Items data from bsid
SELECT l~kunnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsid
FROM knb1 AS l INNER JOIN kna1 AS l1
ON lkunnr = l1kunnr
INNER JOIN bsid AS b
ON lkunnr = bkunnr AND
lbukrs = bbukrs
WHERE l~kunnr IN s_kunnr AND
l~bukrs = p_bukrs and
b~zfbdt le p_allgst.
IF SY-SUBRC <> 0.
MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsid WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsid BY kunnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Summary of Ageing Analysis for Customer Open Invoices as on'(013)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Customer#'(015) CENTERED,
13 sy-vline ,14(35) 'Customer Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 centered, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsid.
CLEAR v_date.
IF int_bsid-zbd3t <> ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd3t.
ELSE.
IF int_bsid-zbd2t <> ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd2t.
ELSE.
v_date = int_bsid-zfbdt + int_bsid-zbd1t.
ENDIF.
ENDIF.
IF int_bsid-zbd1t = ' '.
v_date = int_bsid-zfbdt.
ENDIF.
IF v_date IN r_date1.
int_final-total1 = int_final-total1 + int_bsid-dmbtr.
ELSEIF v_date IN r_date2.
int_final-total2 = int_final-total2 + int_bsid-dmbtr.
ELSEIF v_date IN r_date3.
int_final-total3 = int_final-total3 + int_bsid-dmbtr.
ELSEIF v_date IN r_date4.
int_final-total4 = int_final-total4 + int_bsid-dmbtr.
ELSEif v_date > r_date4-high.
int_final-total5 = int_final-total5 + int_bsid-dmbtr.
ELSEif v_date < p_allgst.
int_final-total6 = int_final-total6 + int_bsid-dmbtr.
ENDIF.
AT END OF kunnr.
v_flag = 1.
ENDAT.
IF v_flag = 1.
int_final-kunnr = int_bsid-kunnr.
int_final-name1 = int_bsid-name1.
int_final-total = int_final-total1 + int_final-total2 +
int_final-total3 + int_final-total4 + int_final-total5 +
int_final-total6.
APPEND int_final.
v_gtotal1 = v_gtotal1 + int_final-total1.
v_gtotal2 = v_gtotal2 + int_final-total2.
v_gtotal3 = v_gtotal3 + int_final-total3.
v_gtotal4 = v_gtotal4 + int_final-total4.
v_gtotal5 = v_gtotal5 + int_final-total5.
v_gtotal6 = v_gtotal6 + int_final-total6.
v_gtotal = v_gtotal + int_final-total.
WRITE: /1 sy-vline,
2 int_final-kunnr COLOR 4 INTENSIFIED ON,
13 sy-vline,
14 int_final-name1 COLOR 4 INTENSIFIED ON,
49 sy-vline.
DATA : v_rem.
v_rem = sy-tabix MOD 2.
IF v_rem NE 0.
FORMAT COLOR 2 INTENSIFIED.
WRITE : 50 int_final-total1 CURRENCY int_bsid-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsid-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsid-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsid-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsid-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsid-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsid-waers,
168 sy-vline.
ELSE.
WRITE : 50 int_final-total1 CURRENCY int_bsid-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsid-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsid-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsid-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsid-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsid-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsid-waers,
168 sy-vline.
ENDIF.
FORMAT COLOR OFF.
HIDE int_final.
CLEAR int_final.
v_flag = 0.
ENDIF.
AT LAST.
WRITE : /1(168) sy-uline.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
49 sy-vline, 50 v_gtotal1 CURRENCY int_bsid-waers,
66 sy-vline, 67 v_gtotal2 CURRENCY int_bsid-waers,
83 sy-vline, 84 v_gtotal3 CURRENCY int_bsid-waers,
100 sy-vline,101 v_gtotal4 CURRENCY int_bsid-waers,
117 sy-vline,118 v_gtotal5 CURRENCY int_bsid-waers,
134 sy-vline,135 v_gtotal6 CURRENCY int_bsid-waers,
151 sy-vline,152 v_gtotal CURRENCY int_bsid-waers,
168 sy-vline.
HIDE : v_gtotal1,
v_gtotal2,
v_gtotal3,
v_gtotal4,
v_gtotal5,
v_gtotal6,
v_gtotal.
ENDAT.
FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsid BY belnr zfbdt.
LOOP AT int_bsid WHERE kunnr EQ int_final-kunnr.
v_rem = v_cnt MOD 2.
CLEAR v_date.
IF int_bsid-zbd3t <> ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd3t.
ELSE.
IF int_bsid-zbd2t <> ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd2t.
ELSE.
v_date = int_bsid-zfbdt + int_bsid-zbd1t.
ENDIF.
ENDIF.
IF int_bsid-zbd1t = ' '.
v_date = int_bsid-zfbdt.
ENDIF.
IF v_rem NE 0.
format color 2 intensified.
WRITE :/1 sy-vline, 2 int_bsid-belnr,
12 sy-vline,13 int_bsid-kunnr,
23 sy-vline,24 int_bsid-name1,
59 sy-vline,60 int_bsid-xblnr,
76 sy-vline,77 int_bsid-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline, 189 sy-vline,
190 int_bsid-dmbtr CURRENCY int_bsid-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsid-dmbtr.
WRITE : 88 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsid-dmbtr.
WRITE : 105 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsid-dmbtr.
WRITE : 122 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsid-dmbtr.
WRITE : 139 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsid-dmbtr.
WRITE : 156 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsid-dmbtr.
WRITE : 173 int_bsid-dmbtr CURRENCY int_bsid-waers.
ENDIF.
format color off.
ELSE.
WRITE :/1 sy-vline, 2 int_bsid-belnr,
12 sy-vline,13 int_bsid-kunnr,
23 sy-vline,24 int_bsid-name1,
59 sy-vline,60 int_bsid-xblnr,
76 sy-vline,77 int_bsid-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline,189 sy-vline,
190 int_bsid-dmbtr CURRENCY int_bsid-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsid-dmbtr.
WRITE : 88 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsid-dmbtr.
WRITE : 105 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsid-dmbtr.
WRITE : 122 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsid-dmbtr.
WRITE : 139 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsid-dmbtr.
WRITE : 156 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsid-dmbtr.
WRITE : 173 int_bsid-dmbtr CURRENCY int_bsid-waers.
ENDIF.
ENDIF.
FORMAT COLOR OFF.
v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsid-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsid-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsid-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsid-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsid-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsid-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsid-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsid-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Details of Ageing Analysis for Customer Open Invoices as on'(024)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR 1 intensified.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Customer#'(015) CENTERED,
23 sy-vline, 24(35) 'Customer Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
format color off.
WRITE : /1(206) sy-uline.
ENDFORM. " header1
REPORT zfi_vendor_ageing
NO STANDARD PAGE HEADING
LINE-COUNT 58
line-size 168
MESSAGE-ID zh_msg.
Report Name : Vendor Open Items Ageing Report
Purpose : This report displays the Vendor Open Items based on
different Ageing days (Calculated by taking the Base
Line date and the days mentioned in Payment Terms)
M O D I F I C A T I O N L O G
Date | Change Number | Initials | Description
30-Aug-2004 | DTSK900**** | Anji Reddy | Initial
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: lfa1, " Vendor Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Vendor Open Items Data
DATA: BEGIN OF int_bsik OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
shkzg LIKE bsik-shkzg, " Dr/Cr Indicator
belnr LIKE bsik-belnr, " Document Number
xblnr LIKE bsik-xblnr, " Ref Doc No
blart LIKE bsik-blart, " Document Type
zfbdt LIKE bsik-zfbdt, " Base Line Date
zbd1t LIKE bsik-zbd1t, " Due date1
zbd2t LIKE bsik-zbd2t, " Due Date2
zbd3t LIKE bsik-zbd3t, " Due Date3
waers LIKE bsik-waers, " Currency
dmbtr LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_bsik.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
total1 LIKE bsik-dmbtr, " Amount in Local Curr
total2 LIKE bsik-dmbtr, " Amount in Local Curr
total3 LIKE bsik-dmbtr, " Amount in Local Curr
total4 LIKE bsik-dmbtr, " Amount in Local Curr
total5 LIKE bsik-dmbtr, " Amount in Local Curr
total6 LIKE bsik-dmbtr, " Amount in Local Curr
total LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsik-dmbtr, " Amount Totals
v_gtotal2 LIKE bsik-dmbtr, " Amount Totals
v_gtotal3 LIKE bsik-dmbtr, " Amount Totals
v_gtotal4 LIKE bsik-dmbtr, " Amount Totals
v_gtotal5 LIKE bsik-dmbtr, " Amount Totals
v_gtotal6 LIKE bsik-dmbtr, " Amount Totals
v_gtotal LIKE bsik-dmbtr, " Amount Totals
v_subtotal1 LIKE bsik-dmbtr, " Amount Totals
v_subtotal2 LIKE bsik-dmbtr, " Amount Totals
v_subtotal3 LIKE bsik-dmbtr, " Amount Totals
v_subtotal4 LIKE bsik-dmbtr, " Amount Totals
v_subtotal5 LIKE bsik-dmbtr, " Amount Totals
v_subtotal6 LIKE bsik-dmbtr, " Amount Totals
v_subtotal LIKE bsik-dmbtr, " Amount Totals
v_date LIKE bsik-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE SY-LISEL, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsik-zfbdt, " Date Range 1
r_date2 FOR bsik-zfbdt, " Date Range 2
r_date3 FOR bsik-zfbdt, " Date Range 3
r_date4 FOR bsik-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr. "Vendor account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Vendor Code
CLEAR lfa1-lifnr.
SELECT lifnr UP TO 1 ROWS
INTO lfa1-lifnr
FROM lfa1
WHERE lifnr IN s_lifnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Invalid Vendor Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 1 greater'(004)
'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 2 greater'(006)
'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
MESSAGE e999 WITH 'Column 3 greater'(008)
'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Vendor Open Items data from BSIK
SELECT l~lifnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsik
FROM lfb1 AS l INNER JOIN lfa1 AS l1
ON llifnr = l1lifnr
INNER JOIN bsik AS b
ON llifnr = blifnr AND
lbukrs = bbukrs
WHERE l~lifnr IN s_lifnr AND
l~bukrs = p_bukrs and
b~zfbdt le p_allgst.
IF SY-SUBRC <> 0.
MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsik WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsik BY lifnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Summary of Ageing Analysis for Vendor Open Invoices as on'(013)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Vendor#'(015) CENTERED,
13 sy-vline ,14(35) 'Vendor Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 centered, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsik.
CLEAR v_date.
IF int_bsik-zbd3t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_date IN r_date1.
int_final-total1 = int_final-total1 + int_bsik-dmbtr.
ELSEIF v_date IN r_date2.
int_final-total2 = int_final-total2 + int_bsik-dmbtr.
ELSEIF v_date IN r_date3.
int_final-total3 = int_final-total3 + int_bsik-dmbtr.
ELSEIF v_date IN r_date4.
int_final-total4 = int_final-total4 + int_bsik-dmbtr.
ELSEif v_date > r_date4-high.
int_final-total5 = int_final-total5 + int_bsik-dmbtr.
ELSEif v_date < p_allgst.
int_final-total6 = int_final-total6 + int_bsik-dmbtr.
ENDIF.
AT END OF lifnr.
v_flag = 1.
ENDAT.
IF v_flag = 1.
int_final-lifnr = int_bsik-lifnr.
int_final-name1 = int_bsik-name1.
int_final-total = int_final-total1 + int_final-total2 +
int_final-total3 + int_final-total4 + int_final-total5 +
int_final-total6.
APPEND int_final.
v_gtotal1 = v_gtotal1 + int_final-total1.
v_gtotal2 = v_gtotal2 + int_final-total2.
v_gtotal3 = v_gtotal3 + int_final-total3.
v_gtotal4 = v_gtotal4 + int_final-total4.
v_gtotal5 = v_gtotal5 + int_final-total5.
v_gtotal6 = v_gtotal6 + int_final-total6.
v_gtotal = v_gtotal + int_final-total.
WRITE: /1 sy-vline,
2 int_final-lifnr COLOR 4 INTENSIFIED ON,
13 sy-vline,
14 int_final-name1 COLOR 4 INTENSIFIED ON,
49 sy-vline.
DATA : v_rem.
v_rem = sy-tabix MOD 2.
IF v_rem NE 0.
FORMAT COLOR 2 INTENSIFIED.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ELSE.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ENDIF.
FORMAT COLOR OFF.
HIDE int_final.
CLEAR int_final.
v_flag = 0.
ENDIF. -
Reconciled amounts appears in vendor aging report
Dear all,
When we take report for reconciled transactions,reconciled amounts appears in
aging days(Suppose we have ap invoice in 0-30 days and payments made in 30-60 days it's
already reconciled)
Why it is showing in reconciled aging report ?
JeyakanthanDear，
would like to recommend you to refer to the following note： 1228363-Business Partner Balance does not match journal entries。
In any SAP Business One version lower than 2007, 2 separate
reconciliation engines were employed. One reconciliation engine worked
on the marketing document level, where partial reconciliation was
supported & the other worked on the journal entry level, where only
complete reconciliation was supported.
This duality led in some instances to reconciliation inconsistencies
which were initially highlighted with SAP Business One version 2004
patch level 29, where the red message 'Business Partner balance does not
match journal entries' was displayed when running the ageing report by
sales documents & inconsistencies were detected.
In the year end closing guides (available for download from the
Documentation Resource Centre) SAP have always recommended to run the
ageing reports by journal posting.
In 2006, SAP published note 752261, now retired, documenting the system
behaviour & offering a series of 'Select' queries to aid in
reconciliation inconsistency analysis. These queries were an excellent
tool but now SAP can offer a faster, better & more accurate solution.
In SAP Business One 2007 A & B the reconciliation engines have been
unified & partial reconciliation on journal entry level is now fully
supported. Any database that is upgraded from a lower version undergoes
a complex series of reconciliation upgrade algorithms, where any
reconciliation inconsistency is identified & a reconciliation upgrade
(RU) journal entry is automatically created. This RU journal does not
document any accounting transaction, but simply creates an update in the
'Balance Due' column, thus notionally re-openeing previously
inconsistently reconciled transactions.
These RU journals are then available for internal reconciliation.
Please consult the 2007 Internal Reconciliation Upgrade(IRU)Landing
Page:
Channel Partner Portal -> Solutions -> SAP Business One -> Hot Topics ->
SAP Business One 2007 Information Center -> New Single Reconciliation
Engine- A single engine reconciles the difference and eliminates the
previous reconciliation issue. More
Click on 'More' to be directed to the IRU Landing Page.
Here you will find 'How-to-Guides' in all supported languages, links to
Expert Training Sessions & links to other pertinent information.
You will also find available for download 2007 A & B upgrade simulation
tools. SAP recommends to subject a database that is planned to be
upgraded
This upgrade simulation tool employs all internal reconciliation upgrade
algorithms & the application will display in the 'Internal
Reconciliation Upgrade Audit Trail Report' if a database is affected by
inconcistencies.
Hence, if the message 'Business Partner Balance does not match Journal
Entries' is encountered, proceed as follows:
Option 1:
Upgrade database to SAP Business One 2007 & internally reconcile any RU
journals.
Option 2:
Go to the IRU landing page & download the 'IRU pre-upgrade tool' either
for version 2007A or 2007B, depending on your localisation. Follow the
installation instructions & after successful installation & simulated
upgarde of the database, analyse any inconsistencies appearing with the
help of the How-to-guide. Should a type of inconsistency not have a drop
down arrow & be described as 'Balancing upgrade journal transaction',
the comapny accountant may decide to write it off, should the amount be
insignificant or, if the amount is not insignificant, please log a
support ticket with the component:
SBO-ADM-UT-IAT
Step by step detailed instructions including screenshots of how to
install the sim-tool & what it does can be found on this wiki page:
https://wiki.sdn.sap.com/wiki/display/B1/BPaccountBalancedoesnot+matc
chJournalEntries
Thanks & Regards
Apple -
Customized Vendor Aging Report
Dear Experts,
We had developed a customized Vendor Aging Crystal Report as on Date for one of our customer which is similar to SAP's Vendor Liabilities Aging, just a minor change we have been done in our report for calculating the due date of AP Invoice only for the document type as Item, from AP Invoice document date to GRPO's posting date.
So to build this report we had consider following transactions AP Invoice, AP Credit Memo, AP Down Payment Invoice, Outgoing Payment, Incoming Payment & Journal Entry and also we had concluded following scenario's:-
AP Invoice based on GRPO
Standalone AP Invoice's Item / Service.
AP Invoice adjusted against AP Credit Memo.
AP Invoice knocked off against Reconciliation.
AP Credit Memo based on AP Invoice
AP Credit Memo standalone Item /Service
AP Credit Memo adjusted against Outgoing Payment
AP Credit Memo knocked off against Reconciliation
AP Down Payment Invoice - Open.
Outgoing Payment - On Account
Outgoing Payment - Against Transaction.
Outgoing Payment - Direct Knocked off in Reconciliation.
Incoming Payment - On Account
Incoming Payment - Direct Knocked off in Reconciliation.
Journal Entry - Adjusted and Unadjusted
After considering all the possible scenario which do have impact with Vendor has been covered but still our report gets failed to tally with SAP Vendor Liabilities Aging Report on back dated date specially with reco happened transaction which get failed on comparison with Input parameter date against transaction date and reconciled date.
Please refer the attachment contains Store Procedure of this report. We would highly appreciate and thankful if some one could help us in optimizing our store procedure which could get tallied with SAP Vendor Liabilities Aging Report.
Many Thanks in Advance......
Regards
Krishna KumarHi,
Not able to open attached file. Please check these threads:
Vendor Aging Report SAP B1
Customer Receivables Aging - Query
Thanks & Regards,
Nagarajan -
Vendor aging report ,customer aging report
hi to all
can u pls what is vendor aging report . what is the purpose of it . can u pls some theoritical description
i will definitely reward points pls its urgent pls tell if there r any standard reports exists for theese . pls give some custom reports on theese with coding.
and for customer aging also
pls.................Hi,
Check the Vendor against report code:
REPORT zvender_os NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65.
Tables
TABLES: bsik, "open items (A/C: Secondary Index for Customers)
lfa1, "customer master
lfb1,
rf140, "temp stru (Work Fields for Corrence(SAPF140*))
bsak, "cleared items (A/c Secnd Index for Cust(Clrms))
skat.
constants and variables
TYPE-POOLS: slis.
DATA: fieldcat TYPE slis_t_fieldcat_alv,
fieldcat1 TYPE slis_t_fieldcat_alv,
fieldcat_ln TYPE slis_fieldcat_alv,
layout_in TYPE slis_layout_alv,
layout_in1 TYPE slis_layout_alv,
sortcat TYPE slis_t_sortinfo_alv,
sortcat1 TYPE slis_t_sortinfo_alv,
sortcat_ln LIKE LINE OF sortcat,
eventcat1 TYPE slis_t_event,
eventcat TYPE slis_t_event,
eventcat_ln LIKE LINE OF eventcat,
col_pos TYPE i.
DATA: targ_month(2) TYPE n, "0001
targ_year(4) TYPE n, "0001
targ_mth_abs TYPE p, "0001
doc_month(2) TYPE n, "0001
doc_year(4) TYPE n, "0001
doc_mth_abs TYPE p, "0001
mth_result TYPE p, "0001
doc_days TYPE p,
targ_days TYPE p,
addl_days TYPE p,
ext_days TYPE p,
v_days(3) TYPE c,
v_kkber LIKE knkk-kkber.
DATA:
BEGIN OF inrec OCCURS 1000, "0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
shkzg LIKE bsik-shkzg,
dmbtr LIKE bsik-dmbtr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
zbd2t LIKE bsik-zbd2t,
zbd3t LIKE bsik-zbd3t,
zuonr LIKE bsik-zuonr,
END OF inrec.
DATA:
BEGIN OF inrect OCCURS 1000, "0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
shkzg LIKE bsik-shkzg,
dmbtr LIKE bsik-dmbtr,
zfbdt LIKE bsik-zfbdt,
zbd1t LIKE bsik-zbd1t,
zbd2t LIKE bsik-zbd2t,
zbd3t LIKE bsik-zbd3t,
zuonr LIKE bsik-zuonr,
END OF inrect,
BEGIN OF t_item OCCURS 1000, " 0001
lifnr LIKE bsik-lifnr,
belnr LIKE bsik-belnr,
gjahr LIKE bsik-gjahr,
bldat LIKE bsik-bldat,
xblnr LIKE bsik-xblnr,
blart LIKE bsik-blart,
sgtxt LIKE bsik-sgtxt,
zfbdt LIKE bsik-zfbdt,
dmbtr LIKE bsik-dmbtr,
days(3) TYPE c,
zuonr LIKE bsik-zuonr,
END OF t_item,
t_line LIKE t_item OCCURS 1000 WITH HEADER LINE, " 0001
BEGIN OF itab OCCURS 1000,
lifnr LIKE lfa1-lifnr,
total LIKE bsik-dmbtr,
zfuture LIKE bsik-dmbtr,
zcurrent LIKE bsik-dmbtr,
crbal LIKE bsik-dmbtr,
30days LIKE bsik-dmbtr,
60days LIKE bsik-dmbtr,
90days LIKE bsik-dmbtr,
99days LIKE bsik-dmbtr,
120days LIKE bsik-dmbtr,
180days LIKE bsik-dmbtr,
365days LIKE bsik-dmbtr,
bzirk LIKE knvv-bzirk,
vkbur LIKE knvv-vkbur,
vwerk LIKE knvv-vwerk,
vkgrp LIKE knvv-vkgrp,
klimk LIKE knkk-klimk,
cashd LIKE knkk-cashd,
grupp LIKE knkk-grupp,
erdat LIKE lfa1-erdat,
name1 LIKE lfa1-name1,
name2 LIKE lfa1-name2,
stras LIKE lfa1-stras,
ort01 LIKE lfa1-ort01,
telf1 LIKE lfa1-telf1,
psort(10),
sperr LIKE lfa1-sperr,
totsal LIKE bsik-dmbtr,
txt50 LIKE skat-txt50,
gsber LIKE bsik-gsber,
END OF itab.
DATA: sel_tab TYPE TABLE OF rsparams WITH HEADER LINE,
p_debit(1) TYPE c,
p_credit(1) TYPE c.
DATA: t_variant LIKE disvariant OCCURS 0 WITH HEADER LINE.
parameters and select-options
SELECTION-SCREEN BEGIN OF BLOCK blck0 WITH FRAME TITLE text-002.
PARAMETERS: stida LIKE sy-datum DEFAULT sy-datum OBLIGATORY,
p_bukrs LIKE t001-bukrs DEFAULT 'PIIL' MEMORY ID buk
OBLIGATORY.
P_BUKRS LIKE T001-BUKRS DEFAULT 'CC01' OBLIGATORY. "0003
SELECT-OPTIONS: s_lifnr FOR bsik-lifnr ,
s_vkbur FOR knvv-vkbur,
s_vkgrp FOR knvv-vkgrp,
s_bzirk FOR knvv-bzirk,
s_konda FOR knvv-konda,
s_kdgrp FOR knvv-kdgrp NO-DISPLAY ,
s_kvgr2 FOR knvv-kvgr2 NO-DISPLAY ,
s_kkber FOR knkk-kkber NO-DISPLAY ,
s_grupp FOR knkk-grupp NO-DISPLAY ,
s_ctlpc FOR knkk-ctlpc,
s_akont FOR lfb1-akont,
s_gsber FOR bsik-gsber.
PARAMETERS: p_future AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blck0.
SELECTION-SCREEN BEGIN OF BLOCK blck1 WITH FRAME TITLE text-002.
PARAMETERS: p_abs RADIOBUTTON GROUP zrad,
p_due RADIOBUTTON GROUP zrad DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK blck1.
*SELECTION-SCREEN BEGIN OF BLOCK blck2 WITH FRAME TITLE text-003.
*PARAMETERS: c_run RADIOBUTTON GROUP zrac DEFAULT 'X',
c_blk RADIOBUTTON GROUP zrac,
c_all RADIOBUTTON GROUP zrac.
*SELECTION-SCREEN END OF BLOCK blck2.
*SELECTION-SCREEN BEGIN OF BLOCK blck3 WITH FRAME TITLE text-004.
*PARAMETERS: p_debit AS CHECKBOX DEFAULT 'X' ,
p_credit AS CHECKBOX DEFAULT 'X' NO-DISPLAY,
*selection-screen end of block blck3.
start-of-selection.
START-OF-SELECTION.
PERFORM BUILD_EVENTCAT.
p_debit = 'X'.
p_credit = 'X'.
PERFORM get_customer_invoices.
filter records based on selection criteria
PERFORM filter_records.
END-OF-SELECTION.
PERFORM add_sort_field.
PERFORM modify_field.
PERFORM write_report.
*& Form FILTER_RECORDS
To collect all the required data from DB and store them in
internal table.
--> p1 text
<-- p2 text
FORM filter_records.
delete records based on selection criteria
LOOP AT itab.
SELECT vkbur vkgrp vwerk erdat konda kdgrp bzirk kvgr2
INTO (itab-vkbur, itab-vkgrp, itab-vwerk, knvv-erdat,
knvv-konda, knvv-kdgrp,itab-bzirk,knvv-kvgr2)
FROM knvv WHERE lifnr = itab-lifnr
ORDER BY erdat DESCENDING.
AKS :- Not Required for PI
CASE itab-vkbur.
WHEN 'SA1'.
itab-vkbur = 'SF25'.
WHEN 'QLD1'.
itab-vkbur = 'SF23'.
WHEN 'WA1'.
itab-vkbur = 'SF26'.
ENDCASE.
AKS.
EXIT.
ENDSELECT.
IF itab-vkbur IN s_vkbur AND
itab-vkgrp IN s_vkgrp AND
knvv-konda IN s_konda AND
knvv-kdgrp IN s_kdgrp AND
itab-bzirk IN s_bzirk AND
knvv-kvgr2 IN s_kvgr2.
ELSE.
DELETE itab.
CONTINUE.
ENDIF.
SELECT SINGLE klimk grupp cashd
INTO (itab-klimk, itab-grupp, itab-cashd)
FROM knkk WHERE lifnr = itab-lifnr
AND kkber IN s_kkber
AND ctlpc IN s_ctlpc
AND grupp IN s_grupp.
IF SY-SUBRC NE 0.
DELETE ITAB.
CONTINUE.
ENDIF.
SELECT SINGLE skat~txt50
INTO (itab-txt50)
FROM lfb1 INNER JOIN skat
ON lfb1akont EQ skatsaknr
WHERE lfb1~lifnr = itab-lifnr
AND lfb1~akont IN s_akont
AND skat~spras EQ 'EN'.
IF sy-subrc NE 0.
DELETE itab.
CONTINUE.
ENDIF.
SELECT SINGLE name1 name2 telf1 erdat stras ort01 sperr
INTO (itab-name1, itab-name2, itab-telf1,
itab-erdat, itab-stras, itab-ort01, itab-sperr )
FROM lfa1
WHERE lifnr = itab-lifnr
IF sy-subrc NE 0 .
DELETE itab.
CONTINUE.
ENDIF.
AKS For Filteration of Customer base on Block Area.
IF c_all NE 'X'.
IF c_run EQ 'X' AND itab-sperr EQ 'X'.
DELETE itab.
CONTINUE.
ELSE.
IF c_blk EQ 'X' AND itab-sperr NE 'X'.
DELETE itab.
CONTINUE.
ENDIF.
ENDIF.
ENDIF.
MODIFY itab.
ENDLOOP.
ENDFORM. " FILTER_RECORDS
*& Form GET_CUSTOMER_INVOICES
text
--> p1 text
<-- p2 text
FORM get_customer_invoices.
DATA:ztotcre LIKE bsik-dmbtr.
DATA:ztotsal LIKE bsik-dmbtr.
DATA: fsdate LIKE sy-datum.
DATA: l_perio(4) TYPE c.
MOVE stida TO rf140-stida.
MOVE rf140-stida+4(2) TO targ_month.
MOVE rf140-stida+0(4) TO targ_year.
MOVE rf140-stida+6(2) TO targ_days.
targ_mth_abs = ( targ_year * 12 ) + targ_month.
CALL FUNCTION 'ZGET_PERIOD_FROM_DATE'
EXPORTING
i_date = stida
IMPORTING
e_perio = l_perio.
CONCATENATE l_perio '0401' INTO fsdate.
select open items.
IF p_due EQ 'X'.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt " 0001
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsik INTO TABLE inrect
WHERE bukrs = p_bukrs
AND budat LE stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
AND umskz NE 'T'
AND umskz NE 'F'
AND umskz NE 'R'
AND umskz NE 'P'
AND umskz NE 'J'
AND umskz NE 'L'.
LOOP AT INREC.
IF INREC-SHKZG = 'H'.
INREC-DMBTR = INREC-DMBTR * -1.
ENDIF.
MOVE-CORRESPONDING INREC TO T_ITEM. " 0001
PERFORM COLLECT_INVOICE USING INREC-lifnr INREC-DMBTR
INREC-ZFBDT INREC-ZBD1T
INREC-ZBD2T INREC-ZBD3T.
APPEND T_ITEM.
CLEAR T_ITEM.
ENDLOOP.
LOOP AT inrect.
inrec-lifnr = inrect-lifnr.
inrec-belnr = inrect-belnr.
inrec-gjahr = inrect-gjahr.
inrec-bldat = inrect-bldat.
inrec-xblnr = inrect-xblnr.
inrec-blart = inrect-blart.
inrec-sgtxt = inrect-sgtxt.
inrec-shkzg = inrect-shkzg.
inrec-dmbtr = inrect-dmbtr.
CALL FUNCTION 'NJ_CAL_DATE_IN_INTERVAL'
EXPORTING
date = inrect-zfbdt
days = inrect-zbd1t
months = 00
signum = '+'
years = 00
IMPORTING
calc_date = inrec-zfbdt.
inrec-zbd1t = inrect-zbd1t.
inrec-zbd2t = inrect-zbd2t.
inrec-zbd3t = inrect-zbd3t.
inrec-zuonr = inrect-zuonr.
APPEND inrec.
CLEAR inrec.
ENDLOOP.
ELSE.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt " 0001
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsik INTO TABLE inrec
WHERE bukrs = p_bukrs
AND budat LE stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
AND umskz NE 'T'
AND umskz NE 'F'
AND umskz NE 'R'
AND umskz NE 'P'
AND umskz NE 'J'
AND umskz NE 'L'.
ENDIF.
SORT inrec BY lifnr shkzg zfbdt .
LOOP AT inrec.
AT NEW lifnr.
For Customers Credit Balance Transaction to be display in Report
End of Credit Balance
ztotcre = 0.
ztotsal = 0.
ENDAT.
IF inrec-shkzg = 'H'.
inrec-dmbtr = inrec-dmbtr * -1.
ztotcre = ztotcre + inrec-dmbtr.
ELSE.
IF inrec-blart = 'RV'.
IF inrec-bldat GE fsdate.
ztotsal = ztotsal + inrec-dmbtr.
ENDIF.
ENDIF.
ztotcre = ztotcre + inrec-dmbtr.
endif.
IF p_debit EQ 'X'.
IF ztotcre > 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
ENDIF.
ENDIF.
ENDIF.
IF p_credit EQ 'X'.
AT END OF lifnr.
IF ztotcre < 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
APPEND t_item.
CLEAR t_item.
ENDIF.
ENDAT.
ENDIF.
ENDLOOP.
select cleared items
IF p_due EQ 'X'.
REFRESH inrect. CLEAR inrect.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsak INTO TABLE inrect
WHERE bukrs = p_bukrs
AND budat LE stida
AND augdt > stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
REFRESH inrec. CLEAR inrec.
LOOP AT inrect.
inrec-lifnr = inrect-lifnr.
inrec-belnr = inrect-belnr.
inrec-gjahr = inrect-gjahr.
inrec-bldat = inrect-bldat.
inrec-xblnr = inrect-xblnr.
inrec-blart = inrect-blart.
inrec-sgtxt = inrect-sgtxt.
inrec-shkzg = inrect-shkzg.
inrec-dmbtr = inrect-dmbtr.
CALL FUNCTION 'NJ_CAL_DATE_IN_INTERVAL'
EXPORTING
date = inrect-zfbdt
days = inrect-zbd1t
months = 00
signum = '+'
years = 00
IMPORTING
calc_date = inrec-zfbdt.
inrec-zbd1t = inrect-zbd1t.
inrec-zbd2t = inrect-zbd2t.
inrec-zbd3t = inrect-zbd3t.
inrec-zuonr = inrect-zuonr.
APPEND inrec.
CLEAR inrec.
ENDLOOP.
ELSE.
REFRESH inrec. CLEAR inrec.
SELECT lifnr belnr gjahr bldat xblnr blart sgtxt
shkzg dmbtr zfbdt zbd1t zbd2t zbd3t
zuonr
FROM bsak INTO TABLE inrec
WHERE bukrs = p_bukrs
AND budat LE stida
AND augdt > stida
AND lifnr IN s_lifnr
AND gsber IN s_gsber
ENDIF.
SORT inrec BY lifnr shkzg zfbdt .
LOOP AT inrec.
AT NEW lifnr.
ztotcre = 0.
ztotsal = 0.
ENDAT.
IF inrec-shkzg = 'H'.
inrec-dmbtr = inrec-dmbtr * -1.
ztotcre = ztotcre + inrec-dmbtr.
ELSE.
IF inrec-blart = 'RV'.
IF inrec-bldat GE fsdate.
ztotsal = ztotsal + inrec-dmbtr.
ENDIF.
ENDIF.
ztotcre = ztotcre + inrec-dmbtr.
endif.
IF p_debit EQ 'X'.
IF ztotcre > 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
ENDIF.
ENDIF.
ENDIF.
IF p_credit EQ 'X'.
AT END OF lifnr.
IF ztotcre < 0.
MOVE-CORRESPONDING inrec TO t_item. " 0001
PERFORM collect_invoice USING inrec-lifnr ztotcre
inrec-zfbdt inrec-zbd1t
inrec-zbd2t inrec-zbd3t
ztotsal.
APPEND t_item.
CLEAR t_item.
ztotcre = 0.
ztotsal = 0.
APPEND t_item.
CLEAR t_item.
ENDIF.
ENDAT. " 0001
ENDIF.
ENDLOOP.
ENDFORM. " GET_CUSTOMER_INVOICES
*& Form COLLECT_INVOICE
text
-->P_bsik_lifnr text
-->P_bsik_DMBTR text
-->P_bsik_ZFBDT text
-->P_bsik_ZFBDT1 text
-->P_bsik_ZFBDT2 text
-->P_bsik_ZFBDT3 text
FORM collect_invoice USING pp_lifnr
pp_dmbtr
pp_zfbdt
pp_zbd1t
pp_zbd2t
pp_zbd3t
pp_ztotsal.
doc_month = pp_zfbdt+4(2).
doc_year = pp_zfbdt+0(4).
doc_mth_abs = ( doc_year * 12 ) + doc_month.
mth_result = ( targ_mth_abs - doc_mth_abs ).
logic given by Mr. Ashok Singhvi
doc_days = pp_zfbdt+6(2).
addl_days = ( doc_days - targ_days ).
IF addl_days <= 0.
ADD 1 TO mth_result.
ENDIF.
IF NOT pp_zbd3t IS INITIAL.
MOVE pp_zbd3t TO ext_days.
ELSEIF NOT pp_zbd2t IS INITIAL.
MOVE pp_zbd2t TO ext_days.
ELSEIF NOT pp_zbd1t IS INITIAL.
MOVE pp_zbd1t TO ext_days.
ELSE.
CLEAR ext_days.
ENDIF.
CHECK with Andrew whether this is working or not
if extended payment terms exist, subtract no of mths from mth_result
IF NOT ext_days IS INITIAL.
CASE ext_days.
WHEN 30.
SUBTRACT 1 FROM mth_result.
WHEN 60.
SUBTRACT 2 FROM mth_result.
WHEN 90.
SUBTRACT 3 FROM mth_result.
WHEN 120.
SUBTRACT 4 FROM mth_result.
ENDCASE.
ENDIF.
change to key date
IF pp_dmbtr > 0.
IF p_future = 'X'. " 0001
IF mth_result <= 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ELSE.
IF mth_result < 0.
itab-zfuture = pp_dmbtr.
t_item-days = 'FUT'.
ELSEIF mth_result = 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ENDIF. " 0001
itab-crbal = 0.
itab-total = pp_dmbtr.
ELSE.
IF p_future = 'X'. " 0001
IF mth_result <= 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ELSE.
IF mth_result < 0.
itab-zfuture = pp_dmbtr.
t_item-days = 'FUT'.
ELSEIF mth_result = 0.
itab-zcurrent = pp_dmbtr.
t_item-days = 'CUR'.
ELSEIF mth_result = 1.
itab-30days = pp_dmbtr.
t_item-days = '30D'.
ELSEIF mth_result = 2.
itab-60days = pp_dmbtr.
t_item-days = '60D'.
ELSEIF mth_result = 3.
itab-90days = pp_dmbtr.
t_item-days = '90D'.
ELSEIF mth_result > 3 AND mth_result <= 4 .
itab-99days = pp_dmbtr.
t_item-days = '99D'.
ELSEIF mth_result > 4 AND mth_result <= 6 .
itab-120days = pp_dmbtr.
t_item-days = '120D'.
ELSEIF mth_result > 6 AND mth_result <= 12 .
itab-180days = pp_dmbtr.
t_item-days = '180D'.
ELSEIF mth_result > 12 .
itab-365days = pp_dmbtr.
t_item-days = '365D'.
ENDIF.
ENDIF. " 0001
itab-total = pp_dmbtr.
itab-crbal = 0.
ENDIF.
itab-lifnr = pp_lifnr.
itab-totsal = pp_ztotsal.
COLLECT itab.
CLEAR itab.
ENDFORM. " COLLECT_INVOICE
*& Form ADD_SORT_FIELD
text
--> p1 text
<-- p2 text
FORM add_sort_field.
DATA: l_amount(9) TYPE n.
IF p_future = 'X'.
LOOP AT itab.
l_amount = 999999999.
IF itab-365days > 0.
l_amount = l_amount - itab-365days.
CONCATENATE 'A' l_amount INTO itab-psort.
ELSEIF itab-180days > 0.
l_amount = l_amount - itab-180days.
CONCATENATE 'B' l_amount INTO itab-psort.
ELSEIF itab-120days > 0.
l_amount = l_amount - itab-120days.
CONCATENATE 'C' l_amount INTO itab-psort.
ELSEIF itab-99days > 0.
l_amount = l_amount - itab-99days.
CONCATENATE 'D' l_amount INTO itab-psort.
ELSEIF itab-90days > 0.
l_amount = l_amount - itab-90days.
CONCATENATE 'E' l_amount INTO itab-psort.
ELSEIF itab-60days > 0.
l_amount = l_amount - itab-60days.
CONCATENATE 'F' l_amount INTO itab-psort.
ELSEIF itab-30days > 0.
l_amount = l_amount - itab-30days.
CONCATENATE 'G' l_amount INTO itab-psort.
ELSEIF itab-zcurrent > 0.
l_amount = l_amount - itab-zcurrent.
CONCATENATE 'H' l_amount INTO itab-psort.
ELSEif itab-zfuture > 0.
L_AMOUNT = L_AMOUNT - ITAB-zfuture.
CONCATENATE 'F' L_AMOUNT INTO ITAB-PSORT.
ELSE.
l_amount = ABS( itab-total ).
CONCATENATE 'I' l_amount INTO itab-psort.
ENDIF.
MODIFY itab.
ENDLOOP.
ELSE.
LOOP AT itab.
l_amount = 999999999.
IF itab-365days > 0.
l_amount = l_amount - itab-365days.
CONCATENATE 'A' l_amount INTO itab-psort.
ELSEIF itab-180days > 0.
l_amount = l_amount - itab-180days.
CONCATENATE 'B' l_amount INTO itab-psort.
ELSEIF itab-120days > 0.
l_amount = l_amount - itab-120days.
CONCATENATE 'C' l_amount INTO itab-psort.
ELSEIF itab-99days > 0.
l_amount = l_amount - itab-99days.
CONCATENATE 'D' l_amount INTO itab-psort.
ELSEIF itab-90days > 0.
l_amount = l_amount - itab-90days.
CONCATENATE 'E' l_amount INTO itab-psort.
ELSEIF itab-60days > 0.
l_amount = l_amount - itab-60days.
CONCATENATE 'F' l_amount INTO itab-psort.
ELSEIF itab-30days > 0.
l_amount = l_amount - itab-30days.
CONCATENATE 'G' l_amount INTO itab-psort.
ELSEIF itab-zcurrent > 0.
l_amount = l_amount - itab-zcurrent.
CONCATENATE 'H' l_amount INTO itab-psort.
ELSEIF itab-zfuture > 0.
l_amount = l_amount - itab-zfuture.
CONCATENATE 'I' l_amount INTO itab-psort.
ELSE.
l_amount = ABS( itab-total ).
CONCATENATE 'J' l_amount INTO itab-psort.
ENDIF.
MODIFY itab.
ENDLOOP.
ENDIF.
ENDFORM. " ADD_SORT_FIELD
*& Form WRITE_REPORT
text
--> p1 text
<-- p2 text
FORM write_report.
PERFORM build_fieldcat.
PERFORM build_sortcat.
PERFORM build_eventcat.
PERFORM build_layout.
PERFORM start_list_viewer.
ENDFORM. " WRITE_REPORT
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
FORM build_fieldcat.
lifnr
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'LIFNR'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
APPEND fieldcat_ln TO fieldcat.
Name1
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'NAME1'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'Name'.
APPEND fieldcat_ln TO fieldcat.
City Details
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'lfa1'.
fieldcat_ln-fieldname = 'ORT01'.
fieldcat_ln-seltext_l = 'City'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Credit Limit
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNKK'.
fieldcat_ln-fieldname = 'KLIMK'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
APPEND fieldcat_ln TO fieldcat.
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'CRBAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-seltext_l = 'Cr. Bal.'.
fieldcat_ln-seltext_m = 'Cr. Bal.'.
fieldcat_ln-seltext_s = 'Cr. Bal.'.
APPEND fieldcat_ln TO fieldcat.
Total Amount
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-fieldname = 'TOTAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-seltext_l = 'Out.St.Amt.'.
fieldcat_ln-seltext_m = 'Out.St.Amt.'.
fieldcat_ln-seltext_s = 'Out.St.Amt.'.
fieldcat_ln-ref_tabname = 'zbsik'.
fieldcat_ln-ref_fieldname = 'ZDMBTR'.
APPEND fieldcat_ln TO fieldcat.
IF p_future NE 'X'.
Future
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'ZFUTURE'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Future Due'.
fieldcat_ln-seltext_m = 'Future Due'.
fieldcat_ln-seltext_s = 'Future Due'.
APPEND fieldcat_ln TO fieldcat.
ENDIF.
Current
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'ZCURRENT'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Normal Due'.
fieldcat_ln-seltext_m = 'Normal Due'.
fieldcat_ln-seltext_s = 'Normal Due'.
APPEND fieldcat_ln TO fieldcat.
30 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '30DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '0-30 Days'.
fieldcat_ln-seltext_m = '0-30 Days'.
fieldcat_ln-seltext_s = '0-30 Days'.
APPEND fieldcat_ln TO fieldcat.
60 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '60DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '31-60 Days'.
fieldcat_ln-seltext_m = '31-60 Days'.
fieldcat_ln-seltext_s = '31-60 Days'.
APPEND fieldcat_ln TO fieldcat.
90 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '90DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '61-90 Days'.
fieldcat_ln-seltext_m = '61-90 Days'.
fieldcat_ln-seltext_s = '61-90 Days'.
APPEND fieldcat_ln TO fieldcat.
99 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '99DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '91-120 Days'.
fieldcat_ln-seltext_m = '91-120 Days'.
fieldcat_ln-seltext_s = '91-120 Days'.
APPEND fieldcat_ln TO fieldcat.
*120Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '120DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '121-180 Days'.
fieldcat_ln-seltext_m = '121-180 Days'.
fieldcat_ln-seltext_s = '121-180 Days'.
APPEND fieldcat_ln TO fieldcat.
*180 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '180DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '181-365 Days'.
fieldcat_ln-seltext_m = '181-365 Days'.
fieldcat_ln-seltext_s = '181-365 Days'.
APPEND fieldcat_ln TO fieldcat.
*365 Days
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = '365DAYS'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = '>365 Days'.
fieldcat_ln-seltext_m = '>365 Days'.
fieldcat_ln-seltext_s = '>365 Days'.
APPEND fieldcat_ln TO fieldcat.
Last Payment Date
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNKK'.
fieldcat_ln-fieldname = 'CASHD'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Street Name
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'STRAS'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Telephone
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'TELF1'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Credit Group
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'KNKK'.
FIELDCAT_LN-FIELDNAME = 'GRUPP'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
*Sales District
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'BZIRK'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'S_Distt'.
fieldcat_ln-seltext_m = 'S_Distt'.
fieldcat_ln-seltext_s = 'S_Distt'.
APPEND fieldcat_ln TO fieldcat.
Sales Office
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'VKBUR'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-seltext_l = 'S_Off'.
fieldcat_ln-seltext_m = 'S_Off'.
fieldcat_ln-seltext_s = 'S_Off'.
APPEND fieldcat_ln TO fieldcat.
Cust Creat Date
ADD 1 TO COL_POS.
CLEAR FIELDCAT_LN.
FIELDCAT_LN-REF_TABNAME = 'lfa1'.
FIELDCAT_LN-FIELDNAME = 'ERDAT'.
FIELDCAT_LN-COL_POS = COL_POS.
APPEND FIELDCAT_LN TO FIELDCAT.
Del Plant
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'VWERK'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Sales Group
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'KNVV'.
fieldcat_ln-fieldname = 'VKGRP'.
fieldcat_ln-col_pos = col_pos.
APPEND fieldcat_ln TO fieldcat.
Sort Criteria
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'lifnr'.
fieldcat_ln-fieldname = 'PSORT'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-seltext_l = 'Sort Field'.
fieldcat_ln-seltext_m = 'Sort Field'.
fieldcat_ln-seltext_s = 'Sort Field'.
APPEND fieldcat_ln TO fieldcat.
Sales of Customer
ADD 1 TO col_pos.
CLEAR fieldcat_ln.
fieldcat_ln-ref_tabname = 'bsik'.
fieldcat_ln-ref_fieldname = 'DMBTR'.
fieldcat_ln-fieldname = 'TOTSAL'.
fieldcat_ln-col_pos = col_pos.
fieldcat_ln-do_sum = 'X'.
fieldcat_ln-hotspot = 'X'.
fieldcat_ln-emphasize = 'C41'.
fieldcat_ln-seltext_l = 'Total Sales'.
fieldcat_ln-seltext_m = 'Total Sales'.
fieldcat_ln-seltext_s = 'Total Sales'.
APPEND fieldcat_ln TO fieldcat.
ENDFORM. " BUILD_FIELDCAT
*& Form BUILD_SORTCAT
text
--> p1 text
<-- p2 text
FORM build_sortcat.
SORTCAT_LN-SPOS = '1'.
sortcat_ln-spos = '2'. " 0001
sortcat_ln-fieldname = 'PSORT'.
sortcat_ln-up = 'X'. " 0001
sortcat_ln-subtot = 'X'.
APPEND sortcat_ln TO sortcat.
CLEAR sortcat_ln.
SORTCAT_LN-SPOS = '2'.
SORTCAT_LN-FIELDNAME = 'lifnr'.
sortcat_ln-spos = '1'. " 0001
sortcat_ln-fieldname = 'NAME1'. " 0001
sortcat_ln-up = 'X'.
APPEND sortcat_ln TO sortcat.
ENDFORM. " BUILD_SORTCAT
*& Form BUILD_EVENTCAT
text
--> p1 text
<-- p2 text
FORM build_eventcat.
eventcat_ln-name = 'TOP_OF_PAGE'.
eventcat_ln-form = 'PAGE_HEADER'.
APPEND eventcat_ln TO eventcat.
ENDFORM. " BUILD_EVENTCAT
*& Form BUILD_LAYOUT
text
--> p1 text
<-- p2 text
FORM build_layout.
layout_in-colwidth_optimize = 'X'.
layout_in-no_hotspot = 'X'.
layout_in-zebra = 'X'.
layout_in-get_selinfos = 'X'.
ENDFORM. " BUILD_LAYOUT
*& Form START_LIST_VIEWER
text
--> p1 text
<-- p2 text
FORM start_list_viewer.
DATA: pgm LIKE sy-repid.
pgm = sy-repid.
if t_variant[] is initial.
t_variant-report = pgm.
t_variant-variant = '/ATB'.
t_variant-TEXT = '/ATB'.
t_variant-DEPENDVARS = 'S'.
append t_variant.
clear t_variant.
endif.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = pgm
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = fieldcat
it_sort = sortcat
is_layout = layout_in
i_save = 'A'
IS_VARIANT = t_variant
it_events = eventcat
TABLES
t_outtab = itab
EXCEPTIONS
OTHERS = 2.
ENDFORM. " START_LIST_VIEWER
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
DATA l_lifnr(10) TYPE n.
READ TABLE itab INDEX selfield-tabindex.
CHECK sy-subrc = 0.
CASE ucomm.
WHEN '&IC1'.
CASE selfield-sel_tab_field.
WHEN 'ITAB-LIFNR'.
SET PARAMETER ID 'LIF' FIELD itab-lifnr.
SET PARAMETER ID 'BUK' FIELD p_bukrs.
IF itab-lifnr CO '0123456789 '.
l_lifnr = itab-lifnr.
itab-lifnr = l_lifnr.
ENDIF.
SELECT SINGLE kkber INTO knkk-kkber
FROM knkk WHERE lifnr = itab-lifnr.
IF sy-subrc EQ 0.
v_kkber = knkk-kkber.
ELSE.
CLEAR v_kkber.
ENDIF.
REFRESH sel_tab[].
MOVE: 'lifnr' TO sel_tab-selname,
'P' TO sel_tab-kind, " PARAMETER
itab-lifnr TO sel_tab-low.
APPEND sel_tab.
CLEAR sel_tab.
MOVE: 'KKBER' TO sel_tab-selname,
'P' TO sel_tab-kind, " PARAMETER
v_kkber TO sel_tab-low.
APPEND sel_tab.
CLEAR sel_tab.
SUBMIT rfdkli41
USING SELECTION-SET 'VAR1'
WITH SELECTION-TABLE sel_tab
AND RETURN.
CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN.
WHEN 'ITAB-ZCURRENT'. " 0001
v_days = 'CUR'.
PERFORM display_line_item_level.
WHEN 'ITAB-ZFUTURE'.
v_days = 'FUT'.
PERFORM display_line_item_level.
WHEN 'ITAB-30DAYS'.
v_days = '30D'.
PERFORM display_line_item_level.
WHEN 'ITAB-60DAYS'.
v_days = '60D'.
PERFORM display_line_item_level.
WHEN 'ITAB-90DAYS'.
v_days = '90D'.
PERFORM display_line_item_level.
WHEN 'ITAB-99DAYS'.
v_days = '99D'.
PERFORM display_line_item_level.
WHEN 'ITAB-120DAYS'.
v_days = '120D'.
PERFORM display_line_item_level.
WHEN 'ITAB-180DAYS'.
v_days = '180D'.
PERFORM display_line_item_level.
WHEN 'ITAB-365DAYS'.
v_days = '365D'.
PERFORM display_line_item_level.
WHEN 'ITAB-TOTAL'.
v_days = ' '.
PERFORM display_line_item_level. " 0001
ENDCASE.
ENDCASE.
ENDFORM. "USER_COMMAND
PAGE_HEADER
FORM page_header.
WRITE:/115 'Time:', sy-timlo.
WRITE: /115 'Date:', sy-datum.
WRITE: /52 'Customer Outstanding Agewise ', "0002
115 'Page:', sy-pagno.
SKIP.
IF p_abs EQ 'X'.
WRITE: /52 'Vendor Outstanding Agewise (Absolute Aging)',
115 'Page:', sy-pagno.
ELSE.
WRITE: /52 'Vendor Outstanding Agewise (Due Date Aging)',
115 'Page:', sy-pagno.
ENDIF.
SKIP.
ULINE /(132).
WRITE: /02 'Open Items as of:', stida.
IF NOT s_vkgrp[] IS INITIAL.
IF s_vkgrp-high IS INITIAL.
WRITE: 52 'Sales Group :',s_vkgrp-low.
ELSE.
WRITE: 52 'Sales Group :',s_vkgrp-low,'to',s_vkgrp-high.
ENDIF.
ELSE.
WRITE: 52 'Sales Group : All'.
ENDIF.
IF NOT s_grupp[] IS INITIAL.
IF s_grupp-high IS INITIAL.
WRITE: 107 'Credit group :',s_grupp-low.
ELSE.
WRITE: 107 'Credit group :',s_grupp-low,' to',s_grupp-high.
ENDIF.
ELSE.
WRITE: 107 'Credit Group : All'.
ENDIF.
WRITE: /02 'Comapany Code :', p_bukrs.
IF NOT s_konda[] IS INITIAL.
IF s_konda-high IS INITIAL.
WRITE: 52 'Price group :',s_konda-low.
ELSE.
WRITE: 52 'Price group :',s_konda-low,' to',s_konda-high.
ENDIF.
ELSE.
WRITE: 52 'Price Group : All'.
ENDIF.
IF NOT s_ctlpc[] IS INITIAL.
IF s_ctlpc-high IS INITIAL.
WRITE: 107 'Risk category:',s_ctlpc-low.
ELSE.
WRITE: 107 'Risk category:',s_ctlpc-low,' to',s_ctlpc-high.
ENDIF.
ELSE.
WRITE: 107 'Risk category: All'.
ENDIF.
IF NOT s_vkbur[] IS INITIAL.
IF s_vkbur-high IS INITIAL.
WRITE:/02 'Sales Office :',s_vkbur-low.
ELSE.
WRITE:/02 'Sales Office :',s_vkbur-low,' to',s_vkbur-high.
ENDIF.
ELSE.
WRITE:/02 'Sales Office : All'.
ENDIF.
IF NOT s_kdgrp[] IS INITIAL.
IF s_kdgrp-high IS INITIAL.
WRITE: 52 'Customer group :',s_kdgrp-low.
ELSE.
WRITE: 52 'Customer group :',s_kdgrp-low,' to',s_kdgrp-high.
ENDIF.
ELSE.
WRITE: 52 'Customer group : All'.
ENDIF.
IF NOT s_ktokd[] IS INITIAL.
IF s_ktokd-high IS INITIAL.
WRITE: 107 'Account Group:',s_ktokd-low.
ELSE.
WRITE: 107 'Account Group:',s_ktokd-low,' to',s_ktokd-high.
ENDIF.
ELSE.
WRITE: 107 'Account Group: All'.
ENDIF.
IF NOT s_lifnr[] IS INITIAL.
IF s_lifnr-high IS INITIAL.
WRITE: /02 'Vendor No :',s_lifnr-low.
ELSE.
WRITE: /02 'Vendor No :',s_lifnr-low,' to',s_lifnr-high.
ENDIF.
ELSE.
WRITE: /02 'Vendor No : All'.
ENDIF.
IF NOT s_kkber[] IS INITIAL.
IF s_kkber-high IS INITIAL.
WRITE: 52 'Credit Control Area:',s_kkber-low.
ELSE.
WRITE: 52 'Credit Control Area:',s_kkber-low,' to',s_kkber-high. -
Dear Experts
can anybody please help me in getting ageing report project wise . We already have the ageing report Debtors or Creditors wise
in the system but i want the ageing report project wise
warm regards
anandHi Rajshree
Try this One for customers, hopefully you should then be able to amend it to the Supplier Version
select T0.shortname,T2.cardcode 'Customer Code',T2.cardname 'Name', sysdeb 'Debit Amount',syscred 'Credit Amount',
case T0.transtype
when '13' then 'INV'
when '14' then 'AR CN'
when '24' then 'INCOMING'
else 'Other'
end 'Type',
T1.BaseRef'Trans #',
case T0.transtype
when '13' then
(Select Comments from OINV where OINV.Transid=T1.Transid)
else '-'
end 'Inv.Rem.',
(Select SeriesName From NNM1 Where Series=T1.DocSeries and ObjectCode=T0.TransType)'Series',
T0.Ref1,
fccurrency 'BP Currency',
CONVERT(VARCHAR(10), T0.refdate, 103)'Posting Date' ,
CONVERT(VARCHAR(10), T0.duedate, 103) 'Due Date',
CONVERT(VARCHAR(10), T0.taxdate, 103) 'Doc Date' ,
CASE
when (DATEDIFF(dd,T0.refdate,current_timestamp))+1 < 31
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "0-30 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 30
and (datediff(dd,T0.refdate,current_timestamp))+1< 61)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "31 to 60 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 60
and (datediff(dd,T0.refdate,current_timestamp))+1< 91)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "60 to 90 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 90
and (datediff(dd,T0.refdate,current_timestamp))+1< 121)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "91 to 120 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 120
and (datediff(dd,T0.refdate,current_timestamp))+1< 151)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "121 to 150 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 150
and (datediff(dd,T0.refdate,current_timestamp))+1< 181)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "151 to 180 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 180
and (datediff(dd,T0.refdate,current_timestamp))+1< 221)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "181 to 220 days",
CASE
when (DATEDIFF(dd,T0.refdate,current_timestamp))+1 > 220
then
case
when syscred= 0 then sysdeb
when sysdeb= 0 then syscred * - 1
end
end "220 + days"
from JDT1 T0
Inner Join OJDT T1 On T1.TransId=T0.TransId
left outer join
OCRD T2 ON T2.cardcode =T0.shortname where
T2.cardtype = 'c' and T0.intrnmatch = '0'
and (T0.BalDueCred + T0.BalDueDeb) > 0
ORDER BY T2.CARDCODE, T0.taxdate
Kind regards
Sean -
Ar aging report, need help urgent please help!
Hey All Gurus,
Im in a thick soup here. I am trying to do something like this -
if you see the selection screen i have rep and super rep, when a user enters a rep value --- it should use the same value to pull all open items for the super rep as well, since they are essentially the same. please help! this one needs to be done fast. i am pasting the code so that it will be easier ...
thanks a million!
*& Report ZFDOFW04_NEW
REPORT ZFDOFW04_NEW MESSAGE-ID FR
LINE-SIZE 132
LINE-COUNT 60.
*==================================================================
Program: ZFDOFW03 - Aged Trial Balance Report
This produces an Accounts Receivable Past Due Aging Report
in a more simplified/condensed format than the
SAP supplied aging report program - RFDOPR10.
This program is a modified copy of RFDOFW00, - a SAP
Future-Due Report.
This was a 'rush' job - program probably should be
rewritten someday not using logical databases as that
maybe why this runs so slowly!
Original: Feb 1997.
MAINTENANCE HISTORY:
NES071797 Copied from ZFDOFW03. Adding parameter for saeles rep.
JDEDERER - changed header text so it is differnet from ZFDORW03. 9/23
*TEXT SYMBOLS :
001 Open items per
002 O p e n
003 D u e o n
004 cc ba in total
005 until
006 Days until
007 Days over
008 Days
009 over
011 valid until........
012 Insurance limit.....
016 F u t u r e
017 + days
018 D u e
020 Last dunn.notice...
021 Dunning level....
030 S U M M A R Y S H E E T
031 =====================
050 Name Page
051 Burton Snowboard
SELECTION TEXTS:
SUMMEN Output totals only
TAGE1 Due date I until
TAGE2 Due date II until
TAGE3 Due date III until
TAGE4 Due date IV until
TABLES: T001, KNA1, KNB1, KNB5, BSID, BSEGA, RFPDO1, KNVP,
T014, "credit control areas JAM
KNVK, "cust master - contact partner JAM
T014T, "Credit control areas names
BKPF, "TONY ISSUE 4743
TVKO, "TONY ISSUE 4743
KNKK. "cust master - credit mgmt JAM
TYPES: BEGIN OF TOT_TYPE, "DEVK939546
BUKRS LIKE LFB1-BUKRS, "DEVK939546
GSBER LIKE BSIK-GSBER, "DEVK939546
KKBER LIKE BSID-KKBER,
RAST1 TYPE P, "DEVK939546
RAST2 TYPE P, "DEVK939546
RAST3 TYPE P, "DEVK939546
RAST4 TYPE P, "DEVK939546
RAST5 TYPE P, "DEVK939546
RAST6 TYPE P, "DEVK939546
RAST7 TYPE P, "DEVK939546
END OF TOT_TYPE, "DEVK939546
TOT_TAB TYPE TOT_TYPE OCCURS 0. "DEVK939546
CONSTANTS:
C_FALSE TYPE I VALUE 0, "JAM
C_TRUE TYPE I VALUE 1.
DATA: BEGIN OF GTAB OCCURS 1000,
SUPER(10) TYPE C, "TONYC
REP(10) TYPE C, "TONYC
FILKD(10), "tonyc show buying groups
LAND1 LIKE KNA1-LAND1,
GSBER LIKE BSIK-GSBER,
REGIO LIKE KNA1-REGIO,
NAME1 LIKE KNA1-NAME1,
NAME2 LIKE KNA1-NAME2,
ORT01 LIKE KNA1-ORT01,
TELF1 LIKE KNVK-TELF1, "telephone number JAM
CONT_NAME1 LIKE KNVK-NAME1, "contact name JAM
NAMEV LIKE KNVK-NAMEV, "contact name JAM
KUNNR LIKE KNA1-KUNNR, "TONYC
BUKRS LIKE LFB1-BUKRS, "TONYC
KKBER LIKE BSID-KKBER, "tonyc issue #2500
ZTERM LIKE KNB1-ZTERM, "tonyc issue #2500
KLIMK_TXT(22) TYPE C, "credit limit JAM
WAERS LIKE T014-WAERS, "currency JAM
SORT_GSB, "TONYC
RAST1 TYPE P,
RAST2 TYPE P,
RAST3 TYPE P,
RAST4 TYPE P,
RAST5 TYPE P,
RAST6 TYPE P,
RAST7 TYPE P,
T_IND,
END OF GTAB.
DATA HOLD_NAME(40).
DATA HOLD_BUKRS LIKE T001-BUKRS. "tonyc
DATA GOOD_SUPER_REP. "tonyc
DATA: HOLD_REP LIKE KNA1-KUNNR, "tonyc
SUPER_NAME LIKE KNA1-NAME1, "tonyc
REP_NAME LIKE KNA1-NAME1. "tonyc
DATA NAME_LENGTH(2) TYPE C. "tonyc
DATA BACKSLASH(3) VALUE ' / '. "tonyc
DATA REPS_INFO(70) TYPE C. "tonyc
DATA REPORT_TYPE(12) TYPE C.
DATA: C_CREDIT_ABTNR LIKE KNVK-ABTNR. "dept 003 = credit
DATA Z_HOLD_LIMIT(22) TYPE N. "tonyc issue#2216
DATA Z_DESCRIPTION(18). "tonyc issue#2216
DATA WRITE_TOTAL.
DATA HOLD_KLIMK LIKE KNKK-KLIMK.
DATA HOLD_KLIMK2(22) TYPE C.
DATA HOLD-CTLPC LIKE KNKK-CTLPC.
DATA HOLD-CTLPC-TEXT LIKE T691T-RTEXT.
DATA HOLD_ZTERM LIKE KNVV-ZTERM.
DATA TOTAL_RAST7 TYPE P.
DATA TOTAL_RAST2 TYPE P.
DATA TOTAL_RAST3 TYPE P.
DATA TOTAL_RAST4 TYPE P.
DATA TOTAL_RAST5 TYPE P.
DATA TOTAL_RAST6 TYPE P.
DATA TOTAL_RAST1 TYPE P.
DATA HOLD_BUKRS2 LIKE T001-BUKRS.
DATA HOLD_KKBER LIKE BSID-KKBER.
DATA HOLD_KKBER_DESC LIKE T014T-KKBTX.
DATA HOLD_KKBER_DESC2 LIKE T014T-KKBTX.
DATA HOLD_KUNNR2 LIKE KNA1-KUNNR.
DATA L_FIRST_DAY_OF_FISCAL LIKE SY-DATUM. "tonyc issue #3047
DATA: STAB TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
RTOT TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
STOT TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
OP,
MAXMANDT LIKE DD_STIDA,
MAXMANST TYPE P,
SUMKLIMB TYPE P,
SUMVLIBB TYPE P,
VERZUG TYPE P,
OBAD TYPE P,
BLOCK_CNT TYPE P,
INTENS,
ONEBYTE(1) TYPE C,
TAGE1A LIKE RFPDO1-ALLGFAEL,
TAGE2A LIKE RFPDO1-ALLGFAEL,
TAGE3A LIKE RFPDO1-ALLGFAEL,
HOLD_KUNNR LIKE KNA1-KUNNR, "tonyc
HOLD_SUPER LIKE KNA1-KUNNR, "tonyc
HOLD_REP2 LIKE KNA1-KUNNR, "tonyc
SUPER_REP LIKE KNA1-KUNNR, "tonyc
TEMP_TELF1 LIKE KNA1-TELF1, "JAM
IT_T014 LIKE T014 OCCURS 0 WITH HEADER LINE, "JAM
G_KLIMK_TXT LIKE GTAB-KLIMK_TXT, "JAM
G_WAERS LIKE GTAB-WAERS, "JAM
G_CONT_NAME(50) TYPE C. "JA
DATA FILL_REP_INFO.
BC SUNILP 05/14/2007
DATA: BEGIN OF ITAB_VBRP OCCURS 0.
INCLUDE STRUCTURE VBRP.
DATA: END OF ITAB_VBRP.
DATA: T_PERC TYPE F,
SUM_NETWR LIKE VBRP-NETWR.
*DATA: GTAB_LINES LIKE GTAB OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF GTAB_LINES OCCURS 0.
INCLUDE STRUCTURE GTAB.
DATA: IND(1),
OBAD TYPE P.
DATA: END OF GTAB_LINES.
DATA: BEGIN OF ITAB_VBRP1 OCCURS 0,
VBELN LIKE VBRP-VBELN,
NETWR LIKE VBRP-NETWR,
ZZMREP LIKE VBRP-ZZMREP, "Super Rep
ZZLREP LIKE VBRP-ZZLREP, "Rep
PERC TYPE F,
END OF ITAB_VBRP1.
EC SUNILP 05/14/2007
BEGIN_OF_BLOCK 2.
PARAMETERS: REGIO LIKE KNA1-REGIO.
PARAMETERS: CONSOL AS CHECKBOX. "TONYC
PARAMETERS: P_KKBER AS CHECKBOX, "TONYC
P_CONV AS CHECKBOX. "tonyc issue #3047
PARAMETERS: SUMMEN LIKE RFPDO1-ALLGSUMM,
TAGE1 LIKE RFPDO1-ALLGFAEL DEFAULT '30',
TAGE2 LIKE RFPDO1-ALLGFAEL DEFAULT '60',
TAGE3 LIKE RFPDO1-ALLGFAEL DEFAULT '90',
TAGE4 LIKE RFPDO1-ALLGFAEL DEFAULT '120'.
END_OF_BLOCK 2.
BEGIN_OF_BLOCK 3.
SELECT-OPTIONS: P_SUPREP FOR KNVP-KUNNR, "Super REP "DEVK939546
P_REP FOR KNVP-KUNNR, "SALES REP "DEVK939546
P_VKORG FOR TVKO-VKORG, "TONYC ISSUE 4743
P_LOTKZ FOR BKPF-LOTKZ. "TONYC ISSUE 4743
END_OF_BLOCK 3.
INITIALIZATION. "JAM
PERFORM LOAD_T014. "JAM
refresh dd_augdt.
clear dd_augdt.
dd_augdt-option = 'EQ'.
dd_augdt-sign = 'I'.
dd_augdt-low = ' '.
append dd_augdt.
AT SELECTION-SCREEN.
IF CONSOL = 'X'.
IF NOT P_SUPREP[] IS INITIAL. "DEVK939546
MESSAGE E999 WITH 'Consolidated report not allowed w/ Super Rep'.
ENDIF.
ENDIF.
CHECK IF THE REP INFO IS ADDED OR NOT - VS
IF NOT P_SUPREP IS INITIAL OR"TONY ISSUE 4743
NOT P_REP IS INITIAL."TONY ISSUE 4743
FILL_REP_INFO = 'X'."TONY ISSUE 4743
ENDIF."TONY ISSUE 4743
START-OF-SELECTION.
get_frame_title 2.
add function module to track usage JD 10/13/98 *****
CALL FUNCTION 'Z_RUN_LOG'
EXCEPTIONS
OTHERS = 1.
*IF NOT P_SUPREP IS INITIAL AND NOT P_REP IS INITIAL.
P_SUPREP = ' '.
*ENDIF.
GET KNA1 FIELDS LAND1 REGIO KUNNR NAME1 NAME2 ORT01 TELF1. "JAM
new-page.
skip.
TEMP_TELF1 = KNA1-TELF1.
MAXMANDT = '19000101'.
MAXMANST = 0.
SUMVLIBB = 0.
PERFORM GET_CUST_CONTACT. "JAM
Check sales rep- NES071797
Get any valid record and exit.
IF NOT p_suprep[] IS INITIAL. "DEVK939546 "TONY ISSUE 4743 start
good_super_rep = ' '.
SELECT kunn2 INTO super_rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZS' AND
kunn2 IN p_suprep.
EXIT.
ENDSELECT.
IF sy-subrc = 0.
good_super_rep = 'X'.
gtab-super = super_rep.
super_rep = ' '.
ENDIF.
CHECK good_super_rep = 'X'.
SELECT kunn2 INTO gtab-rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZR' AND
kunn2 IN p_rep.
EXIT.
ENDSELECT.
CHECK sy-subrc = 0.
ELSEIF NOT p_rep[] IS INITIAL. "DEVK939546
SELECT kunn2 INTO gtab-rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZR' AND
kunn2 IN p_rep.
EXIT.
ENDSELECT.
CHECK sy-subrc = 0.
ENDIF. "TONY ISSUE 4743 end
GET KNB1 FIELDS BUKRS VLIBB ZTERM. "tonyc #2500
GTAB-BUKRS = KNB1-BUKRS.
GTAB-ZTERM = KNB1-ZTERM.
SUMVLIBB = SUMVLIBB + KNB1-VLIBB.
GET KNB5.
IF KNB5-MADAT > MAXMANDT.
MAXMANDT = KNB5-MADAT.
ENDIF.
IF KNB5-MAHNS > MAXMANST.
MAXMANST = KNB5-MAHNS.
ENDIF.
SUMKLIMB = SUMKLIMB + KLIMB.
GET BSID.
CHECK BSID-BSTAT = SPACE.
field was intended for Business Area, changed to use Currency
GTAB-GSBER = BSID-WAERS.
IF P_KKBER = 'X'. "TONYC ISSUE #2500
IF BSID-KKBER = ' '.
GTAB-KKBER = BSID-BUKRS.
ELSE.
GTAB-KKBER = BSID-KKBER. "TONYC ISSUE #2500
ENDIF.
ENDIF. "TONYC ISSUE #2500
SELECT SINGLE * FROM BKPF "TONY ISSUE 4743
WHERE BUKRS = BSID-BUKRS "TONY ISSUE 4743
AND BELNR = BSID-BELNR "TONY ISSUE 4743
AND GJAHR = BSID-GJAHR. "TONY ISSUE 4743
BC SUNILP 05/14/2007
IF BKPF-XREF2_HD IS NOT INITIAL.
CHECK BKPF-XREF2_HD IN P_SUPREP. "TONY ISSUE 4743
ELSE.
IF P_REP[] IS INITIAL.
REFRESH: ITAB_VBRP, ITAB_VBRP1.
IF NOT BKPF-XBLNR IS INITIAL.
SELECT * FROM VBRP INTO ITAB_VBRP WHERE VBELN = BKPF-XBLNR.
APPEND ITAB_VBRP. CLEAR ITAB_VBRP.
ENDSELECT.
CHECK ITAB_VBRP[] IS NOT INITIAL.
CLEAR: SUM_NETWR.
LOOP AT ITAB_VBRP.
CHECK ITAB_VBRP-ZZMREP IN P_SUPREP.
CHECK ITAB_VBRP-ZZLREP IN P_REP.
MOVE-CORRESPONDING ITAB_VBRP TO ITAB_VBRP1.
COLLECT: ITAB_VBRP1.
SUM_NETWR = SUM_NETWR + ITAB_VBRP-NETWR.
CLEAR ITAB_VBRP.
ENDLOOP.
CHECK ITAB_VBRP1[] IS NOT INITIAL.
LOOP AT ITAB_VBRP1.
CLEAR: T_PERC.
T_PERC = ( ITAB_VBRP1-NETWR / SUM_NETWR ).
ITAB_VBRP1-PERC = T_PERC.
MODIFY ITAB_VBRP1 INDEX SY-TABIX TRANSPORTING PERC.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
EC SUNILP 05/14/2007
IF FILL_REP_INFO = 'X'.
GTAB-SUPER = BKPF-XREF2_HD. "TONY ISSUE 4743 "MOVE THE CONTENTS OF XREF2_HD TO GTAB INTERNAL TABLE - VS
ENDIF.
BC SUNILP 05/14/2007
IF BKPF-XREF1_HD IS NOT INITIAL.
CHECK BKPF-XREF1_HD IN P_REP. "TONY ISSUE 4743 " ELSE MOVE THE CONTENTS OF - VS
ELSE.
REFRESH: ITAB_VBRP, ITAB_VBRP1.
IF NOT BKPF-XBLNR IS INITIAL.
SELECT * FROM VBRP INTO ITAB_VBRP WHERE VBELN = BKPF-XBLNR.
APPEND ITAB_VBRP. CLEAR ITAB_VBRP.
ENDSELECT.
CHECK ITAB_VBRP[] IS NOT INITIAL.
CLEAR: SUM_NETWR.
LOOP AT ITAB_VBRP.
CHECK ITAB_VBRP-ZZMREP IN P_SUPREP.
CHECK ITAB_VBRP-ZZLREP IN P_REP.
MOVE-CORRESPONDING ITAB_VBRP TO ITAB_VBRP1.
COLLECT: ITAB_VBRP1.
SUM_NETWR = SUM_NETWR + ITAB_VBRP-NETWR.
CLEAR ITAB_VBRP.
ENDLOOP.
CHECK ITAB_VBRP1[] IS NOT INITIAL.
LOOP AT ITAB_VBRP1.
CLEAR: T_PERC.
T_PERC = ( ITAB_VBRP1-NETWR / SUM_NETWR ).
ITAB_VBRP1-PERC = T_PERC.
MODIFY ITAB_VBRP1 INDEX SY-TABIX TRANSPORTING PERC.
ENDLOOP.
ENDIF.
ENDIF.
EC SUNILP 05/14/2007
IF FILL_REP_INFO = 'X'.
GTAB-REP = BKPF-XREF1_HD. "TONY ISSUE 4743
ENDIF.
CHECK BKPF-LOTKZ IN P_LOTKZ. "TONY ISSUE 4743
CHECK BKPF-BRNCH IN P_VKORG. "TONY ISSUE 4743
SELECT SINGLE FILKD INTO GTAB-FILKD FROM BSEG
WHERE BUKRS = BSID-BUKRS
AND BELNR = BSID-BELNR
AND GJAHR = BSID-GJAHR
AND BUZEI = BSID-BUZEI.
gtab-gsber = bsid-gsber.
get rep info for each bsid record
IF NOT P_SUPREP IS INITIAL. "tonyc
SELECT KUNNR FROM VBPA INTO HOLD_REP UP TO 1 ROWS "tonyc
WHERE VBELN = BSID-VBELN "tonyc
AND PARVW = 'ZR'. "tonyc
ENDSELECT. "tonyc
IF NOT P_REP IS INITIAL. "tonyc
CHECK HOLD_REP = P_REP. "tonyc
ENDIF. "tonyc
GTAB-REP = HOLD_REP. "tonyc
HOLD_REP = ' '. "tonyc
ENDIF. "tonyc
PERFORM GET_KNKK_INFO. "JAM
GTAB-KLIMK_TXT = G_KLIMK_TXT.
GTAB-WAERS = G_WAERS.
GTAB-LAND1 = KNA1-LAND1.
GTAB-REGIO = KNA1-REGIO.
GTAB-KUNNR = KNA1-KUNNR.
GTAB-NAME1 = KNA1-NAME1.
GTAB-NAME2 = KNA1-NAME2.
GTAB-ORT01 = KNA1-ORT01.
*if there is no phone number for the contact, pull the phone
*number from the sold-to
IF KNVK-TELF1 = ' '.
GTAB-TELF1 = TEMP_TELF1.
ELSE.
GTAB-TELF1 = KNVK-TELF1. "JAM
ENDIF.
GTAB-CONT_NAME1 = KNVK-NAME1.
GTAB-NAMEV = KNVK-NAMEV.
verzug = bsega-netdt - dd_stida.
VERZUG = DD_STIDA - BSEGA-NETDT. "days past due calculation
OP = 'X'.
GTAB-RAST2 = GTAB-RAST3 = GTAB-RAST4 = 0.
GTAB-RAST5 = GTAB-RAST6 = OBAD = GTAB-RAST7 = 0.
IF VERZUG LE 0. "future due
GTAB-RAST1 = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE1. "past due 1 to tage1 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST2 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE2. "past due tage1 to tage2 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST3 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE3. "past due tage2 to tage3 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST4 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE4. "past due tage3 to tage4 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST5 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG GT TAGE4. "past due > tage4 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST6 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
GTAB-RAST7 = GTAB-RAST1 - OBAD.
stab = gtab.
MOVE-CORRESPONDING GTAB TO STAB.
BC SUNILP 05/15/2007
IF ITAB_VBRP1[] IS NOT INITIAL.
GTAB-T_IND = 'X'.
LOOP AT ITAB_VBRP1.
MOVE-CORRESPONDING GTAB TO GTAB_LINES.
GTAB_LINES-SORT_GSB = '1'.
GTAB_LINES-SUPER = ITAB_VBRP1-ZZMREP.
GTAB_LINES-REP = ITAB_VBRP1-ZZLREP.
GTAB_LINES-RAST1 = GTAB_LINES-RAST1 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST2 = GTAB_LINES-RAST2 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST3 = GTAB_LINES-RAST3 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST4 = GTAB_LINES-RAST4 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST5 = GTAB_LINES-RAST5 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST6 = GTAB_LINES-RAST6 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST7 = GTAB_LINES-RAST7 * ITAB_VBRP1-PERC.
GTAB_LINES-OBAD = GTAB_LINES-OBAD * ITAB_VBRP1-PERC.
COLLECT: GTAB_LINES.
ENDLOOP.
ELSE.
MOVE-CORRESPONDING GTAB TO GTAB_LINES.
GTAB_LINES-T_IND = 'X'.
GTAB_LINES-SORT_GSB = '1'.
IF GTAB_LINES-SUPER IN P_SUPREP OR GTAB_LINES-REP IN P_REP.
COLLECT: GTAB_LINES.
ENDIF.
ENDIF.
EC SUNILP 05/15/2007
gtab-sort_gsb = stab-sort_gsb = '0'.
collect: gtab, stab.
gtab-gsber = stab-gsber = '****'.
GTAB-SORT_GSB = '1'.
IF REGIO = SPACE OR REGIO = GTAB-REGIO.
IF GTAB_LINES-SUPER IN P_SUPREP OR GTAB_LINES-REP IN P_REP.
COLLECT: GTAB, STAB.
ENDIF.
ENDIF.
END-OF-SELECTION.
TAGE1A = TAGE1 + 1.
TAGE2A = TAGE2 + 1.
TAGE3A = TAGE3 + 1.
IF SUMMEN = ' '.
sort gtab by bukrs land1 regio kunnr gsber sort_gsb.
sort gtab by bukrs land1 regio name1 kunnr gsber sort_gsb. "JAM
IF CONSOL = 'X'.
SORT GTAB BY LAND1 REGIO NAME1 KUNNR BUKRS KKBER GSBER SORT_GSB.
"TONYC
REPORT_TYPE = 'consolidated'.
ELSEIF NOT P_SUPREP[] IS INITIAL. "DEVK939546
SORT GTAB
BY SUPER REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
BC SUNILP 05/15/2007
SORT GTAB_LINES
BY SUPER REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'super rep'.
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
ELSEIF NOT P_REP[] IS INITIAL. "DEVK939546
SORT GTAB "DEVK939546
BY REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
"DEVK939546
BC SUNILP 05/15/2007
SORT GTAB_LINES
BY REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'rep'. "DEVK939546
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
ELSE.
SORT GTAB BY BUKRS KKBER LAND1 REGIO NAME1 KUNNR GSBER SORT_GSB.
BC SUNILP 05/15/2007
SORT GTAB_LINES BY BUKRS KKBER LAND1 REGIO NAME1 KUNNR GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'regular'.
ENDIF.
BC SUNILP 05/15/2007
DELETE ADJACENT DUPLICATES FROM GTAB COMPARING BUKRS NAME1.
LOOP AT GTAB_LINES.
IF P_REP[] IS INITIAL.
IF GTAB_LINES-SUPER NOT IN P_SUPREP.
DELETE GTAB_LINES.
ENDIF.
ELSE.
IF GTAB_LINES-SUPER NOT IN P_SUPREP OR GTAB_LINES-REP NOT IN P_REP.
DELETE GTAB_LINES.
ENDIF.
ENDIF.
ENDLOOP.
LOOP AT GTAB.
READ TABLE GTAB_LINES WITH KEY BUKRS = GTAB-BUKRS
NAME1 = GTAB-NAME1.
IF SY-SUBRC NE '0'.
DELETE GTAB.
ENDIF.
ENDLOOP.
EC SUNILP 05/15/2007
LOOP AT GTAB.
MOVE GTAB-BUKRS TO T001-BUKRS. READ TABLE T001.
RESERVE 5 LINES.
CASE REPORT_TYPE.
WHEN 'regular'.
IF HOLD_BUKRS <> GTAB-BUKRS.
IF SY-TABIX > 1. "TONYC
NEW-PAGE. SKIP. "TONYC
ENDIF. "TONYC
ENDIF.
PERFORM WRITE_CUST_INFO. "TONYC
PERFORM WRITE_DETAIL.
hold_bukrs = gtab-bukrs. "tonyc
WHEN 'consolidated'.
IF HOLD_KUNNR <> GTAB-KUNNR. "TONYC
PERFORM WRITE_CUST_INFO. "TONYC
ENDIF. "TONYC
HOLD_KUNNR = GTAB-KUNNR. "TONYC
PERFORM WRITE_DETAIL.
WHEN 'super rep'.
IF GTAB-T_IND NE 'X'.
BC SUNILP 05/22/2007
READ TABLE GTAB_LINES WITH KEY BUKRS = GTAB-BUKRS
NAME1 = GTAB-NAME1.
EC SUNILP 05/22/2007
IF ( HOLD_SUPER <> GTAB_LINES-SUPER ) OR
( HOLD_REP2 <> GTAB_LINES-REP ).
NEW-PAGE.
PERFORM GET_AND_WRITE_SUPERINFO.
ENDIF.
HOLD_REP2 = GTAB_LINES-REP.
HOLD_SUPER = GTAB_LINES-SUPER.
IF HOLD_KUNNR <> GTAB-KUNNR. "TONYC
WRITE :/. "TONYC
ULINE. "TONYC
PERFORM WRITE_CUST_INFO. "TONYC
ENDIF. "TONYC
HOLD_KUNNR = GTAB-KUNNR. "TONYC
PERFORM WRITE_DETAIL. "TONYC
AT END OF REP. "DEVK939546
SKIP. "DEVK939546
RESERVE 7 LINES. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Rep:', "DEVK939546
GTAB-REP, '/', REP_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES RTOT. "DEVK939546
REFRESH RTOT. "DEVK939546
ENDAT. "DEVK939546
AT END OF SUPER. "DEVK939546
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
NEW-PAGE. SKIP. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Super Rep:', "DEVK939546
GTAB-SUPER, '/', SUPER_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES STOT. "DEVK939546
REFRESH STOT. "DEVK939546
ENDAT. "DEVK939546
ELSE.
LOOP AT GTAB_LINES WHERE BUKRS = GTAB-BUKRS
AND NAME1 = GTAB-NAME1.
IF ( HOLD_SUPER <> GTAB_LINES-SUPER ) OR
( HOLD_REP2 <> GTAB_LINES-REP ).
NEW-PAGE.
PERFORM GET_AND_WRITE_SUPERINFO.
ENDIF.
HOLD_REP2 = GTAB_LINES-REP.
HOLD_SUPER = GTAB_LINES-SUPER.
IF HOLD_KUNNR <> GTAB_LINES-KUNNR.
WRITE :/.
ULINE.
PERFORM WRITE_CUST_INFO.
ENDIF.
HOLD_KUNNR = GTAB_LINES-KUNNR.
PERFORM WRITE_DETAIL.
AT END OF REP.
SKIP.
RESERVE 7 LINES.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE: / 'Summary for Rep:',
GTAB_LINES-REP, '/', REP_NAME, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES RTOT.
REFRESH RTOT.
ENDAT.
AT END OF SUPER.
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
NEW-PAGE. SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE: / 'Summary for Super Rep:',
GTAB_LINES-SUPER, '/', SUPER_NAME, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES STOT.
REFRESH STOT.
ENDAT.
ENDLOOP.
ENDIF.
WHEN 'rep'. "DEVK939546
LOOP AT GTAB_LINES WHERE BUKRS = GTAB-BUKRS
AND NAME1 = GTAB-NAME1.
IF HOLD_REP2 <> GTAB_LINES-REP. "DEVK939546
NEW-PAGE. "DEVK939546
PERFORM GET_AND_WRITE_REPINFO. "DEVK939546
ENDIF. "DEVK939546
HOLD_REP2 = GTAB_LINES-REP. "DEVK939546
IF HOLD_KUNNR <> GTAB_LINES-KUNNR. "DEVK939546
WRITE :/. "DEVK939546
ULINE. "DEVK939546
PERFORM WRITE_CUST_INFO. "DEVK939546
ENDIF. "DEVK939546
HOLD_KUNNR = GTAB_LINES-KUNNR. "DEVK939546
PERFORM WRITE_DETAIL. "DEVK939546
AT END OF REP. "DEVK939546
SKIP. "DEVK939546
RESERVE 7 LINES. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Rep:', "DEVK939546
GTAB_LINES-REP, '/', REP_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES RTOT. "DEVK939546
REFRESH RTOT. "DEVK939546
ENDAT. "DEVK939546
ENDLOOP.
ENDCASE.
ENDLOOP.
ENDIF.
OP = ' '.
REFRESH GTAB.
IF NOT REPORT_TYPE = 'super rep'.
ULINE.
ENDIF.
SKIP 1.
IF SUMMEN = ' '. "if 'output totals only' bypass new-page
NEW-PAGE. SKIP.
ENDIF.
WRITE: /25 TEXT-030, 132 ONEBYTE, /25 TEXT-031, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES STAB. "DEVK939546
TOP-OF-PAGE.
INTENS = SPACE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE: / SY-VLINE, 1 TEXT-001, DD_STIDA, 75 TEXT-051, 132 SY-VLINE.
ULINE.
WRITE: / SY-VLINE, 13 SY-VLINE, 30 SY-VLINE,
47 SY-VLINE, 58 TEXT-003, 81 SY-VLINE,
92 TEXT-003, 115 SY-VLINE, 118 TEXT-003, 132 SY-VLINE,
/ SY-VLINE, 02 TEXT-004, 13 SY-VLINE, TEXT-002,
30 SY-VLINE, 32 TEXT-018, 47 SY-VLINE,
50 '1', 54 TEXT-040, 57 TAGE1, 64 SY-VLINE, " 65 tage2,
67 TAGE1A, 72 TEXT-040, 75 TAGE2,
81 SY-VLINE, 83 TAGE2A, 89 TEXT-040, 91 TAGE3, 98 SY-VLINE,
101 TAGE3A, 107 TEXT-040, 110 TAGE4, 115 SY-VLINE,
117 TAGE4, 123 TEXT-017, 132 SY-VLINE.
ULINE.
SKIP 1.
SUMMARY.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
FORM write_tots *
--> PTAB *
FORM WRITE_TOTS TABLES PTAB TYPE TOT_TAB. "DEVK939546
CLEAR INTENS. "DEVK939546
FORMAT COLOR COL_HEADING INTENSIFIED OFF. "DEVK939546
IF P_CONV = 'X'. "tonyc issue #3047 begin
WRITE /4 TEXT-101.
WRITE: /4 TEXT-102,
50 TEXT-100.
ENDIF. "tonyc issue #3047 end
ULINE. "DEVK939546
SORT PTAB BY BUKRS GSBER. "DEVK939546
LOOP AT PTAB. "DEVK939546
IF SY-TABIX > 1.
WRITE_TOTAL = 'X'.
ENDIF.
MOVE PTAB-BUKRS TO T001-BUKRS. READ TABLE T001. "DEVK939546
MOVE PTAB-GSBER TO T001-WAERS. "DEVK939546
IF P_CONV = 'X'. "tonyc issue #3047 begin
PERFORM CONVERT_VALUES USING STAB-RAST1
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST2
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST3
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST4
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST5
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST6
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST7
STAB-GSBER.
ENDIF. "TOnyc issue #3047 end
MOVE-CORRESPONDING PTAB TO STAB.
COLLECT STAB.
IF P_KKBER = 'X'. "TONYC ISSUE #2500
CLEAR HOLD_KKBER_DESC2.
SELECT SINGLE KKBTX INTO HOLD_KKBER_DESC2 FROM T014T
WHERE KKBER = STAB-KKBER AND
SPRAS = 'E'.
IF SY-SUBRC <> '0'.
HOLD_KKBER_DESC2 = 'Undetermined'.
ENDIF.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 6 STAB-GSBER, HOLD_KKBER_DESC2, SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
IF P_CONV = 'X'. "tonyc issue #3047 begin
T001-WAERS = 'USD'.
ENDIF. "tonyc issue #3047 end
WRITE: 13 STAB-RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
HOLD_BUKRS2 = STAB-BUKRS. "TONYC ISSUE #2500
ULINE.
FORMAT COLOR OFF.
TOTAL_RAST1 = STAB-RAST1 + TOTAL_RAST1.
TOTAL_RAST2 = STAB-RAST2 + TOTAL_RAST2.
TOTAL_RAST3 = STAB-RAST3 + TOTAL_RAST3.
TOTAL_RAST4 = STAB-RAST4 + TOTAL_RAST4.
TOTAL_RAST5 = STAB-RAST5 + TOTAL_RAST5.
TOTAL_RAST6 = STAB-RAST6 + TOTAL_RAST6.
TOTAL_RAST7 = STAB-RAST7 + TOTAL_RAST7.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF. "DEVK939546
IF INTENS = SPACE. "DEVK939546
FORMAT COLOR COL_NORMAL INTENSIFIED OFF. "DEVK939546
INTENS = 'X'. "DEVK939546
ELSE. "DEVK939546
FORMAT COLOR COL_NORMAL INTENSIFIED ON. "DEVK939546
INTENS = SPACE. "DEVK939546
ENDIF. "DEVK939546
WRITE: / SY-VLINE, PTAB-BUKRS, PTAB-GSBER, SY-VLINE, "DEVK939546
(14) PTAB-RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE."DEVK939546
TOTAL_RAST1 = STAB-RAST1 + TOTAL_RAST1.
TOTAL_RAST2 = STAB-RAST2 + TOTAL_RAST2.
TOTAL_RAST3 = STAB-RAST3 + TOTAL_RAST3.
TOTAL_RAST4 = STAB-RAST4 + TOTAL_RAST4.
TOTAL_RAST5 = STAB-RAST5 + TOTAL_RAST5.
TOTAL_RAST6 = STAB-RAST6 + TOTAL_RAST6.
TOTAL_RAST7 = STAB-RAST7 + TOTAL_RAST7.
ENDIF.
ENDLOOP. "DEVK939546
ULINE. "DEVK939546
IF P_KKBER = 'X'. "TONYC ISSUE #2500
IF P_CONV = 'X'. "tonyc issue #3047 begin
FORMAT COLOR OFF.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: SY-VLINE,
6 'TOTAL ', SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 13 TOTAL_RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
ULINE.
ENDIF. "tonyc issue #3047 end
ELSE.
IF P_CONV = 'X'.
FORMAT COLOR OFF.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: SY-VLINE,
6 'TOTAL ', SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 13 TOTAL_RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
ULINE.
ENDIF.
ENDIF.
SKIP 1. "DEVK939546
ENDFORM. "DEVK939546
*& Form GET_KNKK_INFO
text
--> p1 text
<-- p2 text
FORM GET_KNKK_INFO.
CLEAR: G_WAERS,
G_KLIMK_TXT,
KNKK-KLIMK.
get credit control area (KKBER) for comp code (BUKRS)
SELECT SINGLE KLIMK
INTO KNKK-KLIMK
FROM KNKK
WHERE KUNNR = KNA1-KUNNR AND
KKBER = T001-KKBER.
IF SY-SUBRC = 0.
get currency for cred ctrl area
CLEAR IT_T014.
READ TABLE IT_T014 WITH KEY KKBER = T001-KKBER BINARY SEARCH.
G_WAERS = IT_T014-WAERS.
WRITE KNKK-KLIMK TO G_KLIMK_TXT CURRENCY G_WAERS.
ENDIF.
ENDFORM. " GET_KNKK_INFO
*& Form SELECT_KNKK
text
-->P_KKBER Credit Limit Controlling Area
<--P_FOUND_KNKK Indicates if record found
FORM SELECT_KNKK USING P_KKBER
CHANGING P_FOUND_KNKK.
CLEAR: G_WAERS,
G_KLIMK_TXT,
KNKK-KLIMK.
SELECT SINGLE KLIMK
INTO KNKK-KLIMK
FROM KNKK
WHERE KUNNR = KNA1-KUNNR AND
KKBER = P_KKBER.
IF SY-SUBRC = 0.
P_FOUND_KNKK = C_TRUE.
get currency for cred ctrl area
CLEAR IT_T014.
READ TABLE IT_T014 WITH KEY KKBER = P_KKBER BINARY SEARCH.
G_WAERS = IT_T014-WAERS.
WRITE KNKK-KLIMK TO G_KLIMK_TXT CURRENCY G_WAERS.
ELSE.
P_FOUND_KNKK = C_FALSE.
ENDIF.
ENDFORM. " SELECT_KNKK
*& Form GET_CUST_CONTACT & PHONE NUMBER
FORM GET_CUST_CONTACT.
CLEAR KNVK.
C_CREDIT_ABTNR = '0003'. "look for contact in credit dept
SELECT NAME1
NAMEV
TELF1
INTO (KNVK-NAME1,
KNVK-NAMEV,
KNVK-TELF1)
FROM KNVK
WHERE KUNNR = KNA1-KUNNR AND
ABTNR = C_CREDIT_ABTNR.
ENDSELECT.
If there wasn't a contact person for the credit dept, then just
pull up the first contact info we find regardless of dept
IF SY-SUBRC <> 0.
CLEAR KNVK.
SELECT NAME1
NAMEV
TELF1
INTO (KNVK-NAME1,
KNVK-NAMEV,
KNVK-TELF1)
FROM KNVK
WHERE KUNNR = KNA1-KUNNR.
IF SY-SUBRC = 0.
EXIT.
ENDIF.
ENDSELECT.
ELSE.
EXIT.
ENDIF. "not contact found in credit dept.
ENDFORM. " GET_CUST_CONTACT
*& Form LOAD_T014
FORM LOAD_T014.
SELECT *
INTO TABLE IT_T014
FROM T014.
SORT IT_T014.
ENDFORM. " LOAD_T014
*& Form WRITE_CUST_INFO "TONYC
text moved code and created a form. for cleaner code "TONYC
--> p1 text
<-- p2 text
FORM WRITE_CUST_INFO.
IF NOT REPORT_TYPE = 'super rep'.
IF SY-TABIX > 1.
ULINE.
ENDIF.
ENDIF.
CONCATENATE GTAB-NAMEV "JAM
GTAB-CONT_NAME1
INTO G_CONT_NAME
SEPARATED BY SPACE.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
IF REPORT_TYPE = 'super rep'.
IF GTAB-T_IND NE 'X'.
WRITE: / GTAB-KUNNR, GTAB-NAME1, GTAB-ORT01, GTAB-REGIO, GTAB-LAND1,
"g_cont_name,
132 ONEBYTE.
ELSE.
WRITE: / GTAB_LINES-KUNNR, GTAB_LINES-NAME1, GTAB_LINES-ORT01, GTAB_LINES-REGIO, GTAB_LINES-LAND1,
"g_cont_name,
132 ONEBYTE.
ENDIF.
WRITE: /21 onebyte, 12 gtab-name2, 45 gtab-ort01,
gtab-telf1, "gtab-klimk_txt, gtab-waers.
132 onebyte.
ELSE.
WRITE: / GTAB-KUNNR, GTAB-NAME1, GTAB-ORT01, GTAB-REGIO, GTAB-LAND1,
"g_cont_name, "JAM
132 ONEBYTE.
WRITE: /11 onebyte, 12 gtab-name2, 45 gtab-ort01,
gtab-telf1, "gtab-klimk_txt, gtab-waers, "JAM
132 onebyte.
ENDIF.
ENDFORM. " WRITE_CUST_INFO
*& Form GET_AND_WRITE_SUPERINFO
text
--> p1 text
<-- p2 text
FORM GET_AND_WRITE_SUPERINFO.
ULINE.
IF GTAB-T_IND NE 'X'.
SELECT SINGLE NAME1 FROM KNA1 INTO SUPER_NAME "TONYC
WHERE KUNNR = GTAB-SUPER. "TONYC
SELECT SINGLE NAME1 FROM KNA1 INTO REP_NAME "TONYC
WHERE KUNNR = GTAB-REP. "TONYC
CONCATENATE SUPER_NAME REP_NAME INTO REPS_INFO "TONYC
SEPARATED BY BACKSLASH. "TONYC
FORMAT COLOR COL_TOTAL INTENSIFIED. "TONYC
WRITE:/ GTAB-SUPER, '/', "TONYC
GTAB-REP, "TONYC
25 REPS_INFO, 132 ONEBYTE. "TONYC
ELSE.
SELECT SINGLE NAME1 FROM KNA1 INTO SUPER_NAME
WHERE KUNNR = GTAB_LINES-SUPER.
SELECT SINGLE NAME1 FROM KNA1 INTO REP_NAME
WHERE KUNNR = GTAB_LINES-REP.
CONCATENATE SUPER_NAME REP_NAME INTO REPS_INFO
SEPARATED BY BACKSLASH.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE:/ GTAB_LINES-SUPER, '/',
GTAB_LINES-REP,
25 REPS_INFO, 132 ONEBYTE.
ENDIF.
ENDFORM. " GET_AND_WRITE_SUPERINFO
*& Form GET_AND_WRITE_REPINFO
text
--> p1 text
<-- p2 text
FORM GET_AND_WRITE_REPINFO.
ULINE.
SELECT SINGLE NAME1 FROM KNA1 INTO REP_NAME
WHERE KUNNR = GTAB-REP.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE:/ GTAB-REP,
25 REP_NAME, 132 ONEBYTE.
ENDFORM. " GET_AND_WRITE_REPINFO
*& Form WRITE_DETAIL
text
--> p1 text
<-- p2 text
FORM WRITE_DETAIL.
clear z_description. "TONYC #2216
move GTAB-KLIMK_TXT to z_hold_limit.
IF z_hold_limit = 400.
z_description = 'COD/Check'.
elseif z_hold_limit = 500.
z_description = 'COD/Cash'.
elseif z_hold_limit = 600.
z_description = 'Need Dealer Agree'.
elseif z_hold_limit = 700.
z_description = 'Need PDCs'.
elseif z_hold_limit = 800.
z_description = 'Need Fin Statements'.
elseif z_hold_limit = 900.
z_description = 'Past Due Balance'.
elseif z_hold_limit = 1000.
z_description = 'Miracle?'.
endif. "TONYC #2216
MOVE GTAB-GSBER TO T001-WAERS.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
IF HOLD_KUNNR2 <> GTAB-KUNNR. "TONYC
IF REPORT_TYPE = 'super rep'.
WRITE: /3 ONEBYTE, GTAB-BUKRS.
WRITE: 92 gtab-klimk_txt, gtab-waers, 132 onebyte. "TONYC
WRITE: 92 gtab-klimk_txt, z_description,132 onebyte."TONYC #2500
ELSE.
WRITE: / ONEBYTE, GTAB-BUKRS.
WRITE: 92 gtab-klimk_txt, z_description,132 onebyte."TONYC #2500
WRITE: 92 gtab-klimk_txt, gtab-waers, 132 onebyte. "TONYC
ENDIF.
ENDIF.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
IF P_KKBER = 'X'. "TONYC ISSUE# 2500
CLEAR HOLD_KKBER_DESC.
SELECT SINGLE KKBTX INTO HOLD_KKBER_DESC FROM T014T
WHERE KKBER = GTAB-KKBER AND
SPRAS = 'E'.
IF SY-SUBRC <> '0'.
HOLD_KKBER_DESC = 'Undetermined'.
ENDIF.
SELECT SINGLE KLIMK CTLPC
INTO (HOLD_KLIMK, HOLD-CTLPC)
FROM KNKK
WHERE KUNNR = GTAB-KUNNR AND
KKBER = GTAB-KKBER.
SELECT SINGLE RTEXT INTO HOLD-CTLPC-TEXT FROM T691T
WHERE SPRAS = 'EN' AND
CTLPC = HOLD-CTLPC AND
KKBER = GTAB-KKBER.
WRITE HOLD_KLIMK TO HOLD_KLIMK2 CURRENCY GTAB-WAERS.
WRITE: /7 GTAB-KKBER,
12 HOLD_KKBER_DESC,
80 HOLD_KLIMK2,
103 GTAB-GSBER,
108 HOLD-CTLPC-TEXT.
ENDIF. "TONYC ISSUE# 2500
FORMAT COLOR COL_NORMAL INTENSIFIED ON. "TONYC
MOVE STAB-GSBER TO T001-WAERS.
CLEAR HOLD_NAME.
SELECT SINGLE NAME1 FROM KNA1 INTO HOLD_NAME
WHERE KUNNR = GTAB-FILKD.
WRITE: /15 GTAB-FILKD,
30 HOLD_NAME.
IF GTAB-T_IND NE 'X'.
WRITE: /15(14) GTAB-RAST1 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB-RAST7 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB-RAST2 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB-RAST3 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB-RAST4 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB-RAST5 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB-RAST6 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
132 ONEBYTE.
ELSE.
IF REPORT_TYPE NE 'super rep'.
LOOP AT GTAB_LINES WHERE KUNNR = GTAB-KUNNR.
WRITE: / GTAB_LINES-SUPER, ONEBYTE,
15(14) GTAB_LINES-RAST1 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST7 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST2 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST3 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST4 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST5 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST6 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
132 ONEBYTE.
ENDLOOP.
ELSE.
WRITE: / GTAB_LINES-SUPER, ONEBYTE,
15(14) GTAB_LINES-RAST1 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST7 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST2 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST3 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST4 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST5 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST6 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
132 ONEBYTE.
ENDIF.
ENDIF.
HOLD_BUKRS = GTAB-BUKRS. "Tonyc
HOLD_KUNNR2 = GTAB-KUNNR. "TONYC
HOLD_KKBER = GTAB-KKBER. "TONYC ISSUE #2500
IF REPORT_TYPE = 'super rep' OR REPORT_TYPE = 'rep'. "DEVK939546
IF GTAB-T_IND NE 'X'.
MOVE-CORRESPONDING GTAB TO RTOT. "DEVK939546
COLLECT RTOT. "DEVK939546
ELSE.
MOVE-CORRESPONDING GTAB_LINES TO RTOT.
COLLECT RTOT.
ENDIF.
IF REPORT_TYPE = 'super rep'. "DEVK939546
IF GTAB-T_IND NE 'X'.
MOVE-CORRESPONDING GTAB TO STOT. "DEVK939546
COLLECT STOT. "DEVK939546
ELSE.
MOVE-CORRESPONDING GTAB_LINES TO STOT.
COLLECT STOT.
ENDIF.
ENDIF. "DEVK939546
ENDIF. "DEVK939546
ENDFORM. " WRITE_DETAIL
*& Form convert_values
text
-->P_STAB_RAST1 text
-->P_STAB_GSBER text
FORM CONVERT_VALUES USING P_STAB_RAST1 "tonyc issue #3047 begin
P_STAB-GSBER.
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
CLIENT = SY-MANDT
DATE = SY-DATUM
FOREIGN_AMOUNT = P_STAB_RAST1
FOREIGN_CURRENCY = P_STAB-GSBER
LOCAL_CURRENCY = 'USD'
RATE = 0
TYPE_OF_RATE = 'M'
READ_TCURR = 'X'
IMPORTING
EXCHANGE_RATE =
FOREIGN_FACTOR =
LOCAL_AMOUNT = P_STAB_RAST1
LOCAL_FACTOR =
EXCHANGE_RATEX =
FIXED_RATE =
DERIVED_RATE_TYPE =
EXCEPTIONS
NO_RATE_FOUND = 1
OVERFLOW = 2
NO_FACTORS_FOUND = 3
NO_SPREAD_FOUND = 4
DERIVED_2_TIMES = 5
OTHERS = 6 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " convert_valuessolved
Maybe you are looking for
-
Help: BB keyboard doesn't work correctly
Hi all, I have a problem with my BB curve 8520. Yesterday the keyboard started to do strange things: when I'm writing text messages it skips some letters it starts automatically to cancel all I have wrote without I have pushed "del" sometimes it au
-
I try opening Itunes, and a message pops up saying that Itunes has encountered an error and needs to close. This is about a minute after I try to open. Itunes shows on the processes for about twenty seconds before the message pops up. What can I do?
-
Deploying MDM adapter content in PI 7.1..
Hello, I have a requirement to deploy MDM content in PI 7.1 server through ESR. But when I try to login into ESR with j2ee_admin or PISUPER user I get the below pasted error. The j2ee_admin and PISUPER users are also not able to login into RWB which
-
Urgent:SELECT_OPTIONS_RESTRICT function module
I have to use declare the PO number,IDoc Number,Invoice number in the selection screen and the criteria is it must be Multiple single values and Optional so i can use this FM.How should i declare?
-
How to create conditions in BEx
Hi, Please tell me if my query condition on a KF looks like this how can i achieve this? Key Figure: 1.Forcast Accuracy 2.Actual 3.abserr Formula for Forecast Accuracy: If Actual>0,then do 1-abserr/actual, else 0