AGP 4X what would be some top performers from this era?

Hello. I have a PC that has a 2.4Ghz CPU & 1.5Gb RAM on a WinXp 32-bit system powered by a 400W PSU.
The AGP (no PCI-E) is a 2X/4X slot and from what I can gather is a first generation 2.0 compliant. I have read that most if not all 8X cards are backwards compliant but a very real possibility of the voltage signaling level can cause instability or a card not working at all or even damage to ones card/system. I also am not sure of the voltage signaling level of my slot. I have only been able to find one person that informed me that because the slit in between the two connecting blocks of my old AGP card is further back from the back of the card (that is to say the larger block is closer to where the metal bracket is at the back of the desktop) that I have a 3.3V keyed slot. Although if I am using a 4X card I assume it can handle 1.5V's with no problem.
With that info. mentioned I am wondering what some of the best performers are that would be at 4X. I have tried a few games with this card (Sapphire Radeon 9600XT DDR 128MB, which I know many run hot and this one although still working has burned out it's own fan!) as I have tried a few games such as MS Flight Sim X, Bio (something) and some sniper 3 game and they were very choppy during play (very ) so something with more memory, processing power would be a nice addition to this aged system. Unless of course there is an 8X card that would not damage this system.
Thank you very much,
Mumford68

I stand corrected, found an 8X/4X card -
PNY - GeForce 6200 256MB AGP Graphics Card
here at best buy. Below are some specs.
Lifestyle:     Mainstream
      Chipset:     NVIDIA GeForce
      GPU Series:     NVIDIA GeForce 6
      GPU/VPU:     NVIDIA GeForce 6200
      RAMDAC:     Dual 400 MHz
      Fill Rate per Second:     1.4 Billion Texels
      Vertices per Second:     263 Million
      Maximum Resolution:     2048 x 1536 @ 85Hz (Analog)
      Video Memory:     256MB
      Memory Type:     DDR
      Memory Interface:     64-bit
      Interface Type:     AGP
      Interface Speed:     4x
       8X

Similar Messages

DPS: pinch and zoom function not working on all pages within folio (v30 tools using the pdf setting). What would cause some pages to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer?

What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

I want to make a folder "A" and save to disk (appendable), then as and when required I wish to append to that folder files "B" and later on files "C" and so on. What would be the way to do this.

I want to make a folder "A" and save to disk(appendable), then as and when required I want to append files "B" and "C" and so on to that folder, what would be the way to do this.

It's not clear how what you're describing is different from the way all folders work.

How much attached storage can a mac server handle? What would be the best suggestion for this?

Hello, hopefully I am in the correct location, if not, i apologize. Please bear with me as I am fairly new to MAC server. Here is my dillema. I have a mac graphics group that uses about 6TB of storage currently on a Windows server. We are running into issues such as permissions and searching inability. I was considering moving them to a mac server but will need to add storage to this. What would be recommended for such large disk space? We do currenlty have 2 mac mini servers and all the users are bound to AD as well. Thank you in advance for any suggestions!

One of the Mac Mini Server boxes I deal with has 24 TB hanging off of the box (configured as RAID-6), plus a two-disk RAID-1 mirror set inside the box. That's also a pretty small configuration, both in terms of its physical size and in terms of its storage capacity in the grand scheme of things.
A Mac Pro or Mac Pro Server will do 8 TB inside the box, plus a whole lot more outside the box either direct-attached storage (DAS) or via a Storage Area Network (SAN) configuration, but the performance of a Mac Pro Server is probably overkill for your needs, too.
As much as you are focusing on the capacity, you'll also want to look at how you'll archive and manage that much storage. At how you'll manage and conduct backups of your data.
You'll also be looking at the speed and the design of your network, if you're moving large files around regularly. Gigabit Ethernet does pretty well for small groups, but you may be looking for a different setup of that's not fast enough.

What would stop PPTP or L2TP from Passing through SRP527W

Hey i have been trying to setup the SRP527W to allow VPN access ether via PPTP or L2TP/IPSEC to a Wiindows server!
short story! the old ADSL Router Died and looked for a more reliable one purchased SRP527W configured ports to forward to Server
4500, 1701, 1723, 500 and 433
I enabled the VPN Passthrough for L2TP, IPSEC and PPTP
i know about the GRE Tunnel unsure if its setup Correctly
Tunnel Number: 1
Tunnel Name: Workplace
Enable: Yes
Checksum: none
Sequence: none
Key: None
key Value: N/A
Wan interface Name: PVCO
Destination IP or Hostname: 192.168.XXX.XXX
Remote IP Address/Subnet Mask: 10.0.0.0/8,172.168.0.0/16, 192.168.0.0/24

eee! So many posts.
I currently have 2 harddrives hooked up. One has about 37.56 Gigs left on it (probably just over 3/4 full) and the other is nearly full. My files are saved onto it. I am editing in DV format and everything is rendered.
I have a drive allocated as the scratch disk.
I don't believe the drive is going to sleep. I would think it would effect my audio as well, since they are both located on the same drive.
For what it's worth, I ended up ejecting the drive I was using as I needed to do some other work and my system seemed to speed back up. I reopened Final Cut with and it's like my system isn't bogged down anymore. I may try capturing to tape using a different drive and see if maybe it was the drive itself that was bogging down my system.

I really would love some feed back on this

I developing a game and am calling two external .swf files on
to the stage at the same time. How do I make these two communicate
probably between one another from the stage without breaking down
or crashing?
I have on the stage a reapeated loop so when it receives an
action, or variable, it will trigger one of the two external .swf
files. But after the first trigger, it doesn't work again!! It will
only play what I call taht one time and not again. I have tried
deleting the variables, setting them back to default, etc.
Let me know if this isn't enough clarification on my problem
or question. Again, I am basically asking for a way to commuicate
between two external .swf files smoothly and without a worry of it
crashing.
Please help

Cool. You didn't ask for it, but I'll give you just a couple
more pointers.
createEmptyMovieClip returns a reference to your clip. So you
can assign it to a variable and then just use that variable for
future referencing. It can save you a lot of heart ache with typos
and the like. So your code could become:
curEnemy=createEmptyMovieClip("enemy_holder", 10);
curEnemy.loadMovie(['enemies/enemy_0.swf'], 0);
curEnemy._x = 0;
curEnemy._y = 0;
Its subtle, but can be very helpful.
The next issue is that you have a conditional comparing the
bytesLoaded and bytesTotal. I'm seeing several potential problems
here. First, I think that there is no bytesLoaded property for the
movieclip class. There is a getBytesLoaded() method, but that is
different.
Next your code is probably working because both bytesLoaded
and bytesTotal ARE equal since neither exist. So they will both
need to be replace with the methods.
Finally if this project is going to be delivered over the
web? If so your code will break when it goes online since it will
take time for the external swf to load. Flash won't pause on the
loadMovie line until the clip loads and then proceed. It will start
loading and continue on with the rest of the code in the frame.
Unless enemy_0.swf is tremendously small, by the time Flash gets to
the loading test there won't be anything loaded and Flash will just
skip to the end.
Of course I'm not sure why you have to wait for enemy to load
before you start loading char.swf. But we will pretend for right
now that it does.
Since you basically need to keep comparing the loaded and
total over time until the file has finished. Your choice for this
would be either onEnterFrame or setInterval. The first is easier to
explain so I will start there.
this.onEnterFrame=function(){
if(curEnemy.getBytesLoaded() == curEnemy.getBytesTotal()
&& curEnemy._width>0){
//the clip is loaded and ready
//do what you want but be sure to do:
delete this.onEnterFrame
That is the basic way to wait until a clip has fully loaded.
Don't forget to delete the onEnterFrame when completed or it will
just keep on going and wasting your processor.
PS: I'm guessing what you found out was that since you are
loading a swf into enemy_holder that the name of the swf was not
important and that only the name of the container clip was? So the
answer was:
enemy_holder._x +=10;
Unless of course on the main timeline inside of enemy_0.swf
there also happened to be a movieclip with the instance name of
enemy_0, in which case the first example you gave would also do
something!

HT201317 what would cause problems uploading photos from pc to ipad?

Photo stream not working from PC to ipad. Photo stream is enabled and wifi on.

I have this question too!

What would prevent createobject ("application.illustrator") from working in a VB Script

I have an automated process that monitors for Illustrator Docs and saves them as PDF.
The script is invoked from a service and was working fine, in the middle of processing, we starting getting the error "ActiveX component can't create object"
The error number is 429.
If I run the program interactively it works fine.
I am running the service under a named account that has local admin privlege to the box.
Windows2003 Standard, SP2
Illustrator 15 CS5 Design Premium.
From everything I can tell nothing on the machine has changed.
No updates, etc.
I have tried reinstalling Illustrator
All adobe patches are up to date.
I have tried creating a different account and get the same result, works fine running interactively, can't create object id script is invoked from a service.
Interestingly, you do see Illustrator.exe process in memory for a few seconds, the memory stalls ~30K and doesn't move.
When you run interactively the process is very active and memory grows was past 30K
Very baffled by this, any thoughts or insight is appreciated.
Greg

Good morninig,
Did you check the VBA menus tools\references to be sure that you use the lastest Library (Adobe Illustrator CS5 Type Library). If you have oldest dll try to remove them.
On PC opening Illustrator before using VBA macros is also a good approach.
Good luck
Patrice

HT201413 How can I tell when i have to restart to factory ? What would make it happen to do this ?

I was all working fine ...then about a week ago it showed a iTunes Circle with the arrow pointing up tto it I hope i didnt loose all if mu info ....I really need the pics and other things ...Could someone have done somehing to it ? Like hru Windows. Internet Emploer , Microsoft ...ect. ?? Please help me ...I am a a loss ...I am jus reading ur article on APPLE now ....Jus wonder if someone else coulg do this to me > TY <3

Put the message in the Trash and then empty the Trash.

What should I remove or uninstall from this list from the Etrecheck I did?

I just did an Etrecheck on my MacBookPro (mid 2009) that recently upgraded to Mavericks.
There are some things on it that I'm not sure whether I should uninstall them, delete, them, and/or Update them. I don't want to take action on something I shouldn't. I'm questioning some of the 3rd party support links, and the "Outdated" JavaAppelet plugin.
Should I take any actions on any of it? And what's the best way to uninstall the Microsoft Office that's on my machine?
Thanks for any help.
Hardware Information:
          MacBook Pro (15-inch, Mid 2009)
          MacBook Pro - model: MacBookPro5,3
          1 2.8 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce 9400M - VRAM: 256 MB
          NVIDIA GeForce 9600M GT - VRAM: 512 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 2 days 17:47:19
Disk Information:
          APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (61.18 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-868
USB Information:
          Apple Inc. Built-in iSight
          Apple Internal Memory Card Reader
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.flipvideo.FlipShareServer.launchd.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
Launch Agents:
          [System] com.flipvideo.FlipShare.AutoRun.plist 3rd-Party support link
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [System] com.hp.help.tocgenerator.plist 3rd-Party support link
          [System] com.hp.messagecenter.launcher.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] [email protected]
User Login Items:
          MyTomTomSA
          Garmin Express Service
          Dropbox
          TomTomHOMERunner
          bomgar-scc-20130613-174624
          bomgar-scc-20140219-171041
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.4.1.4 3rd-Party support link
          OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
          Silverlight: Version: 4.0.51204.0 3rd-Party support link
          FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
          googletalkbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
          AdobePDFViewer: Version: 9.5.5 3rd-Party support link
          GarminGpsControl: Version: 2.9.2.0 Release 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
Safari Extensions:
          Unsubscribe.com: Version: 2.3
          PriceBlink: Version: 4.1
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          3ivx MPEG-4 3rd-Party support link
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
Old Applications:
          /Applications/iWork '09
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          iSkysoft Helper Compact:          Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
                    /Users/[redacted]/Library/Application Support/Helper/iSkysoft Helper Compact.app
          TomTomHOMERunner:          Version: 2.9.5.1974 - SDK 10.4 3rd-Party support link
                    /Users/[redacted]/Library/Application Support/TomTom HOME/TomTomHOMERunner.app
Time Machine:
          Skip System Files: NO
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 407.98 GB
          Destinations:
                    Data [Network] (Last used)
                    Total size: 2
                    Total number of backups: 24
                    Oldest backup: 2013-03-03 19:58:59 +0000
                    Last backup: 2014-02-28 19:28:23 +0000
                    Size of backup disk: Excellent
                              Backup size 2 > (Disk size 464.96 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
              12%          Google Chrome
               8%          WindowServer
               2%          hidd
               1%          EtreCheck
               1%          Google Chrome Helper
Top Processes by Memory:
          164 MB          com.apple.IconServicesAgent
          147 MB          mds_stores
          115 MB          softwareupdated
          94 MB          Google Chrome
          74 MB          Dropbox
Virtual Memory Information:
          692 MB          Free RAM
          1.54 GB          Active RAM
          1.01 GB          Inactive RAM
          531 MB          Wired RAM
          1.87 GB          Page-ins
          16 MB          Page-outs

unistall office
http://support.microsoft.com/kb/2398768
Try running software update, see if it has an update for Java

I would like to prevent content from this ip address from 173.223.52.163 being run in the browser. It is adds usualy and can be included in many sites like yahoo.

Often slows down the browser also.

This is one of those painful issues all admins seem to have to go thought as their users move form local to remote.
The solutions are not pretty but possible.
One that seems elegant but you would have to do some coding, would be to write a script to disable (turn off) time Machine when connecting via VPN (or better, enable it only when IN HOUSE).
I think that you should be able to use the firewall to look for the ip range of VPN users and to 'route' the ip of the TM device NOWHERE (drop). This will cause errors for your users ('Delayed Backup ' or 'Time Machine has not backed up in x Days') but should be a solution.
There are others, but they become more complex than this and most do not hide the errors.
Hope this gives you some inspiration,
Peter

What do I need to download from this link?

I found this link in the livecycle designer discussion but I can't view or download it, is it a private download or something?
https://acrobat.com/#d=rqvjWvn5WIBrWD*GLDRgfA
https://acrobat.com/#d=gTlaptez8XA2A5*0it4Wow
When I click on the link it alway go to this page. Sorry ahead if this is stupid question.

Adobe changed the URLs for acrobat.com recently with the addition of the Workspaces feature.
You can get to the links by adding "workspaces." in front of acrobat.com:
https://workspaces.acrobat.com/#d=rqvjWvn5WIBrWD*GLDRgfA
https://workspaces.acrobat.com/#d=gTlaptez8XA2A5*0it4Wow

I keep getting a confirm window that pops up and asks "Are you sure you would like to navigate away from this page?" How do I stop that window from popping up?

this happens when i try to move around websites

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

My mid-2010 27" iMac running Mavericks is fine in safe mode, but with normal boot up the screen goes haywire with some animation emanating from the apple menu area at top left of screen.

From what I'm reading in these forums, this is likely an issue due to some 3rd party software / kernal conflict. I am going to run a diagnostic and perhaps someone here can help me evaluate the results and determine what software must be removed.
It's hard to describe what I'm seeing on screen. I've never seen anything like it. I get a number of lines that begin at the top left of my screen, about at the apple icon, and they spread out in a triangular pattern from left to right, top to bottom across my screen, while the entire screen flickers uncontrollably. I realize that iMacs from this era have screen issues, but since I can boot fine in safe mode, this can't be a hardware issue.
Any assistance is greatly appreciated!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I am using iphone 5s, glass got broked, where can i get the original panel and what would be price

i am using iphone 5s, glass got broked, where can i get the original panel and what would be price

If you are from India ,here is how you get Out of Warranty service in India
Out-of-Warranty Service
Please contact an iPhone Authorized Service Provider for out-of-warranty service options.

AGP 4X what would be some top performers from this era?

Similar Messages

Maybe you are looking for