AGP 8x not working

I have a k7n2 delta ILSR and it appears as if 8x agp isnt working. i enabled it int he bios but my card will only go 4x, and 3dmar says Used/Available 4/1x-2x-4x

What video card?
Specs pleese?

Similar Messages

  • AGP cards not working

    Hi.. and hope someone can help me with this.
    I’ve read about a lot of info about problems with AGP ports on MSI boards but still cannot get a clue about my particular problem.
    My specs:
    AMD XP 2.400
    MBO:MSI KT4V (MS-6712 ver 10A)
    RAM: 256MB
    Case: 400W
    OS: Win2K SP3
    My problem: Cannot use video cards in the AGP port. System still can boot and go into safe mode, but in normal mode Windows can barely make it after the logon screen. The system suddenly goes to a kind of standby mode (power button does not work), all energy activity seems to stop (fans too), and I have to unplug and plug the energy cord to be able boot again.
    My tries:
    1) Using a PCI video cards has no problem. Works perfect.
    2) I’ve used 2 different AGP cards, booth with exactly the same problem: PCChips ATI 9200LE 8x and Nvidia MX440 8x. Suppose I can asume the cards are not the problem. They are new ones.
    3) Used MSI Live Update 3 to update BIOS. It was succesfully updated, but problem remains.
    4) Used MSI Live Update 3 to update Board drivers (even the AGP one). It was succesfully updated, but problem remains.
    5) Modify some BIOS parameters like Fastwrite to Disable, AGP voltage to 1.7, but problem remains.
    Thanks on any advice.

    You mean I suppose not the voltage, but the ampères? And sorry, been at birthday party so I couldn't give immediate respons. The troubleshooting guide suggests these:
    3.3V - 28A or better
    5V - 30A or better
    12V - 18A or better
    And perhaps you can learn from this nice guide, below. Good luck!
    "don't worry about agp 8x - i does not offer any significant speed increase. what you are describing seems to me to be related to the ati video card (that's what is experiencing the vpu error). steps 4 through 7 below might be all you need to do. give it a try.
    start with flashing the latest mobo bios before you start if you haven't allready. I recommend stick with the 3.7 Cat driver (many people are reporting worse problems with the later rev Cat drivers) and follow these directions:
    1) download and install the latest via driver (i know, you have it)
    2) download and install latest soundblaster driver (if you are using a soundblaster audio card of course)
    3) download and install catalyst 3.7 driver/control panel/samartgart from ati.
    4) disable fast-write in bios (this was causing corrupted icons and cursor in windoze).
    5) start-run and type in smartgart then enter
    6) enable - pci read/write and agp read (probably allready is enabled).
    7) disable - agp write (default in my case was on causing lots of stability problems in games).
    "apply", reboot, then "ok".

  • AGP 4x not working k7t turbo2

    I've tried everything to get this to work. I updated my BIOS, VIA 4in1 drivers, I've tried the latest Nvidia drivers but rolled them back due to incompatability with my Tnt2, but nothing works. I searched this forum and found a regedit solution, the values it wanted me to edit were already in 4x mode but it is still reported in 2x mode. SANDRA reports that my Motherboard doesnt support 4x, but it says on the MSI site that it supports 4x and in the BIOS it has an option to enable 4x (which is enabled). I've done everything i can think of to fix this, tried several video cards, all run at 2x. The only thing I can thnk of that is lacking is my Power supply because its 250 W but how could that force 2x mode?
    K7t Turbo2
    AMD Duron 1200 100 mhz FSB
    895 Mb Sdram
    TNT2 m64
    250 W Power supply

    I've done several reinstalls of windows and all have the same problem. Rivatuner says my agp bus only supports 1x/2x but is agp 2.0 which is 4x as well. Hope this is of some help.
    $ffffffffff ---------------------------------------------------
    $ffffffffff Northbridge information
    $ffffffffff ---------------------------------------------------
    $0400000000 Description     : VIA KT133 series
    $0400000001 Vendor ID       : 1106 (VIA)
    $0400000002 Device ID       : 0305
    $0400000003 AGP bus         : revision 2.0
    $0400000004 AGP status      : enabled
    $0400000005 AGP rate        : 1x 2x supported, 2x selected
    $0400000006 AGP SBA         : supported, disabled
    $0400000007 AGP FW          : not supported
    $ffffffffff ---------------------------------------------------
    $ffffffffff Display adapter information
    $ffffffffff ---------------------------------------------------
    $0000000000 Description     : NVIDIA RIVA TNT2 Model 64/Model...
    $0000000001 Vendor ID       : 10de (NVIDIA)
    $0000000002 Device ID       : 002d
    $0000000003 Location        : bus 1, device 0, function 0
    $0000000004 Bus type        : AGP revision 2.0
    $0000000005 AGP status      : enabled
    $0000000006 AGP rate        : 1x 2x 4x supported, 2x selected
    $0000000007 AGP SBA         : not supported
    $0000000008 AGP FW          : not supported
    $0000000009 Base address 0  : d6000000 (memory range)
    $000000000a Base address 1  : d4000000 (memory range)
    $000000000b Base address 2  : none
    $000000000c Base address 3  : none
    $000000000d Base address 4  : none
    $000000000e Base address 5  : none
    $ffffffffff ---------------------------------------------------
    $ffffffffff NVIDIA specific display adapter information
    $ffffffffff ---------------------------------------------------
    $0100000000 Graphics core   : NV5 revision 15
    $0100000001 Hardwired ID    : 002d
    $0100000002 Memory bus      : 64-bit
    $0100000003 Memory type     : SDR (RAM configuration 05)
    $0100000004 Memory amount   : 32768KB
    $0100000005 Core clock      : 158.929MHz
    $0100000006 Memory clock    : 158.929MHz
    $0100000007 Reference clock : 14.318MHz
    $0100000008 Maximum Fvco    : 256.000MHz
    $0100000009 Core PLL Fvco   : 317.859MHz (out of range)

  • KT4V AGP controller not working

    Hi Guys    
    kt4v Mobo
    TI 4200 Gainward 'Golden Sample' 128Mb 8x graphics card
    550W QTEC PSU
    maxtor diamond ATA 133 120Gb and old 20Gb hard drives
    Big problem - my AGP socket on my KT4V Mobo does not appear to be working.  The computer screen went blank a week after I built the system.  Funny multiple beep post and nothing on screen.  
    Sent it to back to the seller Watford Electronics who claimed there was nothing wrong with the mobo (did these guys actually stick a graphics card on it to test it? - I don't think so!  )
    The IT man at my work (he builds PCs as part of his job) cleared the CMOS and used an old ATI 'Rage' PCI graphics card to see what was going on. He overwrote the bios (seemingly successful 'cos the PC still worked with the PCI display).  
    Tried both the TI 4200 card and an old Matrox G400 card in AGP socket - same multiple beeps and nothing happening on the screen.  Put in the PCI card - short beep and screen came up.  Altered his AGP readings disabling fast write etc (recommended in this forum).  Still nothing works with an AGP display.  
    He installed one of these little info display pieces of software which seemed to suggest that the AGP socket was being recognised as a PCI socket  .  Couldn't get it to read though and suggested that the basic problem (whether software or hardware) was in the AGP controller).
    Can anybody out there help?
    Stevieboy

    I flashed my BIOS to v1.9, and then the computer worked for about a day. I should note that during this day, the computer gave me the same problems it does now (bad CMOS settings, blank screen the whole way through) between boots. Maybe every third boot attempt was successful.
    When I DID get into Windows, Windows told me it found a serious issue with my video driver (i think it was the driver it had a problem with) and directed me to Nvidia's site. It was at the point after when I downloaded the new drivers and restarted my system that it never turned on again (with one exception). Then the computer would give me a blank screen. As in monitor not getting a signal and flashing the green light as if it's not even plugged into the computer.
    By experimentally pushing every key on the keyboard, I found that pressing F2 gets the computer to boot into Windows (I heard the Windows startup chimes and all, but still a blank screen).
    Since the problem, I've had one successful boot out of hundreds of attempts (under same conditions, suprisingly), and have seen what it gets to:
    The option to enter Setup by pressing F1 or setting default CMOS settings by pressing F2.
    This explains why F2 worked. But why is it that it keeps telling me CMOS settings are bad?
    Well, this time that the screen showed up, I took the opportunity to flash the BIOS to v1.8, hoping maybe v1.9 was faulty. No luck.
    I've tried various video cards, both AGP and PCI. The monitor is fine.
    The motherboard is new.
    Please help me! Not a great first MSI experience. It was a great looking board, but cost more than $100 in CompUSA and is almost brand new!
    Thanks in advance,
    Jason

  • AGP Acceleration not working!

    Ok, I've searched around for a while and I coudn't find a solution to my particular problem, so here I am, at the source!
    I'm not sure when I lost my AGP support, and don't ask me how. So I'm just going to give away some of my specs to paint you guys a picture of my rig's history.
    Mombo: MSI 845GE Max
    Gfx: Radeon 9800 Pro 128mb from Power-Color
    This computer might be old, but I sure as hell know it has AGP support, being newer then a 386 and all
    Note: I did have a GF2 440 MX 32mb, GF4 600 MX 128mb, GF4 TI 4200 128mb and now a Radeon 9800 Pro 128mb all on this mombo in the past, and if I remember correctly, I had AGP support somewhere along the lines!
    Having installed the newest version of intel inf update, DirectX 9.0b and tried the MSI AGP drivers (which my computer didn't take kindly to!).
    Anyone have any fresh ideas on how to solve my problem, do tell, I'm fisically going out of my mind!
    [EDIT]Another thing, I'm running WinXP for anyone who was wondering that, because I've read that AGP Acceleration can be a payne on other operative systems.[/EDIT]

    I think that your problem might be due to the high resolution that you are running, I would try 1,024X768 to see if that is the cause...By the way, Don't you experience a lot of monitor "Flicker" at 60 HZ? ..I would try the 1024X768, at at least 75 HZ...You might even be able to go as high as 100 HZ if your monitor is faily new...Your eyes will thank you, and you can always increase the resolution to 1280X1024 in the game options menu ,as that is what I do.....Sean REILLY875

  • Power Mac G4 AGP (Sawtooth) - PSU cable not working, all the time

    Power Mac G4 Friends
    P1 is connected to the motherboard and working.
    P2 and P3 are connected to hard drives and working.
    P4 is connected to a hard drive and working.
    P6 is connected to optical and Zip drives and working.
    P5 may not be working.
    It was recently that I observed the length of P5. P5 is actually long enough to power an AGP 2x, 4x, ATI or GeForce, 12.v power supply connection required, graphics card.
    Formally, I used P5 to power the hard drive in the front drive bay. For years no problem occurred. Suddenly, on occasion, the hard drive would not boot. When I connected the hard drive to P4, the problem was solved.
    Questions
    Since P5's length extends to the AGP slot, should P5 only be used for an AGP, power supply required, graphics card?
    Is it possible for one PSU cable to not work?
    Is the P5 cable broken?
    Can the P5 cable be replaced?
    Thank you

    Hello, no idea if this helps, but...
    You can convert an ATX PSU for use on a G4...
    http://atxg4.com/sawtooth.html http://atxg4.com/gige-da.html
    http://atxg4.com/quicksilver.html
    http://atxg4.com/mdd.html
    http://atxg4.com/

  • AGP 8X does not work

    I own a GeForce 4 Ti 4200 with AGP 8X.
    It is said that it can work with AGP at 8X. But it is currently working at 4X.
    I just want to know if I can correct it and how.
    Maybe it is only my motherboard which can not control AGP 8X, because it is not mentionned in its BIOS.
    Thank you for your answer.

    Well, I will Copy/paste my other thread ...
    Maybe you can solve this problem, we never know ...
    I have problems with my 3D games, mainly with those which use Quake3 engine : Unreal Tournament 2003, 2004, Wolfenstein ET, Serious Sam 2, Counter-Strike, Diablo 2, Warcraft 3, Jedi Knight 3, Command & Conquer ...
    Sometimes, the game only returns to Windows, sometimes I get the message "....exe encountered a problem and must be closed ...", sometimes a crash, and sometimes a reboot ; after 5 minutes to 2 hours of gaming.
    It looks to happen randomly. When I get down the graphic acceleration ( such as antialiasing or anisotorpy ), I can play longer, but the end will be the same.
    Tried all possible configurations of my grapgic cards ( with multiple tweakers ).
    Tried multiple drivers ( from nVidia, from Microsoft, from MSI, from OpenGL ) but no difference. Maybe a lttle award for the MSI which seems to work longer than the others.
    Formated. Updated the two BIOS ( video and motherboard ), the drivers of each part of my computer, from multiple websites.
    I thought it was a overheating problem, and I played with the computer opened, with a giant fan over it. No change. The other components look good, but maybe it is one of them which does not work.
    I would be pleased for your help.
    LATER :
    I installed the new forceware drivers, and OpenGL now works ( C&C, Jedi Knight ) . I still have troubles with DirectX, even more on D3D 9 ( UT 2004 ). Used Driver Cleaner to completly clear the old drivers but no change ...
    If someone could help me ...

  • NVIDIA driver not working on HP envy dv7

    Hi,
    i trying to install nvidia official driver to my HP envy dv7 laptop.
    Two wasted nights without success.
    I trying newest version from nvidia.com and from pacman.
    Result is same in both cases - black screen, high cpu temperatures, no video output.
    Pasted logs are from pacman version.
    Thank you for help !
    uname -a :
    $ uname -a
    Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
    lspci | grep VGA
    $ lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
    modinfo nvidia
    $modinfo nvidia
    filename: /lib/modules/3.13.5-1-ARCH/extramodules/nvidia.ko.gz
    alias: char-major-195-*
    version: 331.38
    supported: external
    license: NVIDIA
    alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
    alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
    alias: pci:v000010DEd*sv*sd*bc03sc02i00*
    alias: pci:v000010DEd*sv*sd*bc03sc00i00*
    depends: drm,i2c-core
    vermagic: 3.13.0-1-ARCH SMP preempt mod_unload modversions
    parm: NVreg_Mobile:int
    parm: NVreg_ResmanDebugLevel:int
    parm: NVreg_RmLogonRC:int
    parm: NVreg_ModifyDeviceFiles:int
    parm: NVreg_DeviceFileUID:int
    parm: NVreg_DeviceFileGID:int
    parm: NVreg_DeviceFileMode:int
    parm: NVreg_RemapLimit:int
    parm: NVreg_UpdateMemoryTypes:int
    parm: NVreg_InitializeSystemMemoryAllocations:int
    parm: NVreg_RMEdgeIntrCheck:int
    parm: NVreg_UsePageAttributeTable:int
    parm: NVreg_MapRegistersEarly:int
    parm: NVreg_RegisterForACPIEvents:int
    parm: NVreg_CheckPCIConfigSpace:int
    parm: NVreg_EnablePCIeGen3:int
    parm: NVreg_EnableMSI:int
    parm: NVreg_MemoryPoolSize:int
    parm: NVreg_RegistryDwords:charp
    parm: NVreg_RmMsg:charp
    parm: NVreg_AssignGpus:charp
    pacman -Qi nvidia
    $pacman -Qi nvidia
    Name : nvidia
    Version : 331.38-3
    Description : NVIDIA drivers for linux
    Architecture : x86_64
    URL : http://www.nvidia.com/
    Licenses : custom
    Groups : None
    Provides : None
    Depends On : linux>=3.13 linux<3.14 nvidia-libgl nvidia-utils=331.38
    Optional Deps : None
    Required By : None
    Optional For : bumblebee
    Conflicts With : nvidia-96xx nvidia-173xx
    Replaces : None
    Installed Size : 4642.00 KiB
    Packager : Thomas Bächler <[email protected]>
    Build Date : Sun 26 Jan 2014 10:22:40 AM UTC
    Install Date : Wed 26 Feb 2014 05:45:32 PM UTC
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature
    nvidia-xconfig --query-gpu-info
    $nvidia-xconfig --query-gpu-info
    Number of GPUs: 1
    GPU #0:
    Name : GeForce GT 630M
    UUID : GPU-172f9afb-954f-a30c-b9e1-016f89943947
    PCI BusID : PCI:1:0:0
    Number of Display Devices: 1
    Display Device 0 (CRT-0):
    No EDID information available.
    xorg.0.log
    [ 2028.379]
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    [ 2028.394] X Protocol Version 11, Revision 0
    [ 2028.399] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 2028.407] Current Operating System: Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64
    [ 2028.407] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 2028.423] Build Date: 09 January 2014 08:47:24AM
    [ 2028.431]
    [ 2028.439] Current version of pixman: 0.32.4
    [ 2028.456] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2028.456] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2028.498] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 26 18:29:34 2014
    [ 2028.510] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2028.522] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2028.535] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2028.548] (==) ServerLayout "Layout0"
    [ 2028.561] (**) |-->Screen "Screen0" (0)
    [ 2028.574] (**) | |-->Monitor "Monitor0"
    [ 2028.587] (**) | |-->Device "Device0"
    [ 2028.601] (**) |-->Input Device "Keyboard0"
    [ 2028.615] (**) |-->Input Device "Mouse0"
    [ 2028.629] (==) Automatically adding devices
    [ 2028.643] (==) Automatically enabling devices
    [ 2028.658] (==) Automatically adding GPU devices
    [ 2028.673] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2028.688] Entry deleted from font path.
    [ 2028.704] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2028.721] Entry deleted from font path.
    [ 2028.738] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2028.756] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2028.774] Entry deleted from font path.
    [ 2028.792] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2028.869] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 2028.889] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2028.910] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 2028.931] (WW) Disabling Keyboard0
    [ 2028.952] (WW) Disabling Mouse0
    [ 2028.974] (II) Loader magic: 0x804c80
    [ 2028.995] (II) Module ABI versions:
    [ 2029.017] X.Org ANSI C Emulation: 0.4
    [ 2029.039] X.Org Video Driver: 15.0
    [ 2029.062] X.Org XInput driver : 20.0
    [ 2029.084] X.Org Server Extension : 8.0
    [ 2029.107] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2029.109] (--) PCI:*(0:0:2:0) 8086:0166:103c:181d rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
    [ 2029.134] (--) PCI: (0:1:0:0) 10de:0de9:103c:181d rev 161, Mem @ 0xd2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
    [ 2029.186] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 2029.213] Initializing built-in extension Generic Event Extension
    [ 2029.240] Initializing built-in extension SHAPE
    [ 2029.267] Initializing built-in extension MIT-SHM
    [ 2029.295] Initializing built-in extension XInputExtension
    [ 2029.322] Initializing built-in extension XTEST
    [ 2029.349] Initializing built-in extension BIG-REQUESTS
    [ 2029.377] Initializing built-in extension SYNC
    [ 2029.404] Initializing built-in extension XKEYBOARD
    [ 2029.432] Initializing built-in extension XC-MISC
    [ 2029.459] Initializing built-in extension SECURITY
    [ 2029.486] Initializing built-in extension XINERAMA
    [ 2029.512] Initializing built-in extension XFIXES
    [ 2029.538] Initializing built-in extension RENDER
    [ 2029.564] Initializing built-in extension RANDR
    [ 2029.589] Initializing built-in extension COMPOSITE
    [ 2029.615] Initializing built-in extension DAMAGE
    [ 2029.640] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2029.665] Initializing built-in extension DOUBLE-BUFFER
    [ 2029.688] Initializing built-in extension RECORD
    [ 2029.711] Initializing built-in extension DPMS
    [ 2029.734] Initializing built-in extension Present
    [ 2029.756] Initializing built-in extension DRI3
    [ 2029.778] Initializing built-in extension X-Resource
    [ 2029.800] Initializing built-in extension XVideo
    [ 2029.821] Initializing built-in extension XVideo-MotionCompensation
    [ 2029.842] Initializing built-in extension XFree86-VidModeExtension
    [ 2029.863] Initializing built-in extension XFree86-DGA
    [ 2029.883] Initializing built-in extension XFree86-DRI
    [ 2029.903] Initializing built-in extension DRI2
    [ 2029.923] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 2029.923] (II) LoadModule: "glx"
    [ 2029.964] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2029.993] (II) Module glx: vendor="NVIDIA Corporation"
    [ 2029.993] compiled for 4.0.2, module version = 1.0.0
    [ 2030.034] Module class: X.Org Server Extension
    [ 2030.055] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
    [ 2030.076] Loading extension GLX
    [ 2030.077] (II) LoadModule: "nvidia"
    [ 2030.120] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2030.142] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 2030.142] compiled for 4.0.2, module version = 1.0.0
    [ 2030.185] Module class: X.Org Video Driver
    [ 2030.207] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
    [ 2030.229] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 2030.251] (II) NVIDIA X compatibility module for ABI 15.0 built from xorg-server-1.14.99.901
    [ 2030.273] (II) X log verbosity: 5
    [ 2030.315] (--) using VT number 1
    [ 2030.462] (II) Loading sub module "fb"
    [ 2030.462] (II) LoadModule: "fb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2030.462] (II) Module fb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 2030.462] (II) Loading sub module "wfb"
    [ 2030.462] (II) LoadModule: "wfb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2030.462] (II) Module wfb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (II) Loading sub module "ramdac"
    [ 2030.462] (II) LoadModule: "ramdac"
    [ 2030.462] (II) Module "ramdac" already built-in
    [ 2030.462] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 2030.462] (==) NVIDIA(0): RGB weight 888
    [ 2030.462] (==) NVIDIA(0): Default visual is TrueColor
    [ 2030.463] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2030.463] (==) NVIDIA(0): Using HW cursor
    [ 2030.463] (==) NVIDIA(0): Video key set to default value of 0x101fe
    [ 2030.463] (==) NVIDIA(0): Not mapping the primary surface by default.
    [ 2030.463] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
    [ 2030.463] (**) NVIDIA(0): Enabling 2D acceleration
    [ 2030.463] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
    [ 2030.588] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
    [ 2030.588] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 2030.589] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
    [ 2030.589] (II) NVIDIA(0): GPU UUID: GPU-172f9afb-954f-a30c-b9e1-016f89943947
    [ 2030.589] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 2030.589] (II) NVIDIA(0): Board ID: 0xce4e
    [ 2030.589] (II) NVIDIA(0): Chip SKU: 770
    [ 2030.589] (II) NVIDIA(0): Chip SKU Mod: 1
    [ 2030.589] (II) NVIDIA(0): Project: 1303
    [ 2030.589] (II) NVIDIA(0): Project SKU: 0000
    [ 2030.589] (II) NVIDIA(0): GPU RAM Type: DDR3
    [ 2030.589] (--) NVIDIA(0): VideoBIOS: 70.08.b9.00.0b
    [ 2030.589] (--) NVIDIA(0): Found 2 heads on board
    [ 2030.589] (II) NVIDIA(0): Supported display device(s): CRT-0
    [ 2030.589] (II) NVIDIA(0): Bus detected as PCI Express
    [ 2030.589] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 2030.589] (II) NVIDIA(0): SPS : 1
    [ 2030.589] (II) NVIDIA(0): User configuration of GPU PowerMizer is supported
    [ 2030.589] (II) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
    [ 2030.591] (--) NVIDIA(0): CRT-0 (boot, connected)
    [ 2030.591] (--) NVIDIA(0): CRT-0 Name Aliases:
    [ 2030.591] (--) NVIDIA(0): CRT
    [ 2030.591] (--) NVIDIA(0): CRT-0
    [ 2030.591] (--) NVIDIA(0): DPY-0
    [ 2030.591] (--) NVIDIA(0): VGA-0
    [ 2030.591] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): No EDID Available.
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- End of EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2030.591] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2030.591] (**) NVIDIA(0): all display devices.)
    [ 2030.591] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2030.591] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2030.591] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2030.591] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2030.591] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2030.593] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(0): Display device(s) assigned to X screen 0:
    [ 2030.593] (II) NVIDIA(0): CRT-0
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 2030.593] (==) NVIDIA(0): will be used as the requested mode.
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (II) NVIDIA(0): Requested modes:
    [ 2030.593] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Validated MetaModes:
    [ 2030.593] (II) NVIDIA(0): MetaMode "CRT-0:nvidia-auto-select":
    [ 2030.593] (II) NVIDIA(0): Size: 1024 x 768
    [ 2030.593] (II) NVIDIA(0): CRT-0: "nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Size : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Offset : +0 +0
    [ 2030.593] (II) NVIDIA(0): Panning
    [ 2030.593] (II) NVIDIA(0): Domain : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Tracking Area: 1024 x 768 +0 +0
    [ 2030.593] (II) NVIDIA(0): Border : 0,0,0,0
    [ 2030.593] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_60"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_56"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 640x480"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 512x384"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 400x300"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 320x240"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: nvidia-auto-select { ViewPortIn = 1024 x 576, ViewPortOut = 1024 x 576 + 0 + 96 }"
    [ 2030.596] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
    [ 2030.596] (WW) NVIDIA(0): from CRT-0's EDID.
    [ 2030.596] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 2030.596] (--) Depth 24 pixmap format is 32 bpp
    [ 2030.597] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 2030.597] (II) NVIDIA: access.
    [ 2030.599] (II) NVIDIA(0): kernel module enabled successfully
    [ 2030.599] (II) NVIDIA(0): GPU initialized
    [ 2030.599] (II) NVIDIA(0): ACPI: AC state file path: /sys/class/power_supply/ADP1/online
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is running on battery power
    [ 2030.599] (II) NVIDIA(0): ACPI: dock file path: /sys/devices/platform//dock.0/docked
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is undocked
    [ 2030.599] (II) NVIDIA(0): Registered for mobile display change hotkey events.
    [ 2030.602] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
    [ 2030.619] (II) NVIDIA(0): First mode initialized
    [ 2030.624] (==) NVIDIA(0): Using 8388608 bytes for software rendering cache
    [ 2030.629] (II) NVIDIA(0): Using built-in logo image.
    [ 2030.629] (II) NVIDIA(0): Logo is 744x537 with depth 24.
    [ 2030.641] Loading extension NV-GLX
    [ 2030.689] (II) NVIDIA(0): Initialized OpenGL Acceleration
    [ 2030.689] (II) NVIDIA(0): Visuals set up
    [ 2030.689] (II) NVIDIA(0): Pixmap depths set up
    [ 2030.690] (II) NVIDIA(0): GLX visuals set up
    [ 2030.690] (II) NVIDIA(0): Framebuffer set up
    [ 2030.690] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 2030.690] (II) NVIDIA(0): Initialized X Rendering Acceleration
    [ 2030.690] (==) NVIDIA(0): Backing store enabled
    [ 2030.690] (==) NVIDIA(0): Silken mouse enabled
    [ 2030.690] (II) NVIDIA(0): Default colormap initialized.
    [ 2030.690] (II) NVIDIA(0): Palette loaded
    [ 2030.690] (**) NVIDIA(0): DPMS enabled
    [ 2030.690] Loading extension NV-CONTROL
    [ 2030.690] Loading extension XINERAMA
    [ 2030.690] (II) NVIDIA(0): Loading NVIDIA Xinerama information
    [ 2030.690] (II) Loading sub module "dri2"
    [ 2030.690] (II) LoadModule: "dri2"
    [ 2030.690] (II) Module "dri2" already built-in
    [ 2030.690] (II) NVIDIA(0): [DRI2] Setup complete
    [ 2030.690] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 2030.690] (II) NVIDIA(0): Screen initialization complete
    [ 2030.690] (--) RandR disabled
    [ 2030.695] (II) Initializing extension GLX
    [ 2030.726] (II) XKB: Reusing cached keymap
    [ 2030.728] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2030.728] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2030.728] (II) LoadModule: "evdev"
    [ 2030.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2030.728] (II) Module evdev: vendor="X.Org Foundation"
    [ 2030.728] compiled for 1.15.0, module version = 2.8.2
    [ 2030.728] Module class: X.Org XInput Driver
    [ 2030.728] ABI class: X.Org XInput driver, version 20.0
    [ 2030.728] (II) Using input driver 'evdev' for 'Power Button'
    [ 2030.728] Option "XkbRules" "evdev"
    [ 2030.728] Option "XkbModel" "pc104"
    [ 2030.728] Option "XkbLayout" "us"
    [ 2030.728] Option "_source" "server/udev"
    [ 2030.728] Option "name" "Power Button"
    [ 2030.728] Option "path" "/dev/input/event2"
    [ 2030.728] Option "device" "/dev/input/event2"
    [ 2030.728] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.728] Option "driver" "evdev"
    [ 2030.728] (**) Power Button: always reports core events
    [ 2030.728] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2030.729] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2030.729] (--) evdev: Power Button: Found keys
    [ 2030.729] (II) evdev: Power Button: Configuring as keyboard
    [ 2030.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.729] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2030.729] (**) Option "xkb_rules" "evdev"
    [ 2030.729] (**) Option "xkb_model" "pc104"
    [ 2030.729] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2030.748] (II) No input driver specified, ignoring this device.
    [ 2030.748] (II) This device may have been added with another device file.
    [ 2030.748] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 2030.748] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event7)
    [ 2030.748] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
    [ 2030.748] (II) Using input driver 'evdev' for 'HP Truevision HD'
    [ 2030.748] Option "XkbRules" "evdev"
    [ 2030.748] Option "XkbModel" "pc104"
    [ 2030.748] Option "XkbLayout" "us"
    [ 2030.748] Option "_source" "server/udev"
    [ 2030.748] Option "name" "HP Truevision HD"
    [ 2030.748] Option "path" "/dev/input/event7"
    [ 2030.748] Option "device" "/dev/input/event7"
    [ 2030.748] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] Option "driver" "evdev"
    [ 2030.748] (**) HP Truevision HD: always reports core events
    [ 2030.748] (**) evdev: HP Truevision HD: Device: "/dev/input/event7"
    [ 2030.748] (--) evdev: HP Truevision HD: Vendor 0x5c8 Product 0x33a
    [ 2030.748] (--) evdev: HP Truevision HD: Found keys
    [ 2030.748] (II) evdev: HP Truevision HD: Configuring as keyboard
    [ 2030.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 7)
    [ 2030.748] (**) Option "xkb_rules" "evdev"
    [ 2030.748] (**) Option "xkb_model" "pc104"
    [ 2030.748] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) XKB: Reusing cached keymap
    [ 2030.749] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2030.750] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "AT Translated Set 2 keyboard"
    [ 2030.750] Option "path" "/dev/input/event0"
    [ 2030.750] Option "device" "/dev/input/event0"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2030.750] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2030.750] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2030.750] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
    [ 2030.750] (**) Option "xkb_rules" "evdev"
    [ 2030.750] (**) Option "xkb_model" "pc104"
    [ 2030.750] (**) Option "xkb_layout" "us"
    [ 2030.750] (II) XKB: Reusing cached keymap
    [ 2030.750] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "SynPS/2 Synaptics TouchPad"
    [ 2030.750] Option "path" "/dev/input/event10"
    [ 2030.750] Option "device" "/dev/input/event10"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2030.750] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
    [ 2030.750] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
    [ 2030.751] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2030.751] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.751] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 9)
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 2030.751] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.752] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
    [ 2030.752] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2030.752] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 2030.752] Option "XkbRules" "evdev"
    [ 2030.752] Option "XkbModel" "pc104"
    [ 2030.752] Option "XkbLayout" "us"
    [ 2030.752] Option "_source" "server/udev"
    [ 2030.752] Option "name" "HP WMI hotkeys"
    [ 2030.752] Option "path" "/dev/input/event9"
    [ 2030.752] Option "device" "/dev/input/event9"
    [ 2030.752] Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] Option "driver" "evdev"
    [ 2030.752] (**) HP WMI hotkeys: always reports core events
    [ 2030.752] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
    [ 2030.752] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 2030.752] (--) evdev: HP WMI hotkeys: Found keys
    [ 2030.752] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 2030.752] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 10)
    [ 2030.752] (**) Option "xkb_rules" "evdev"
    [ 2030.752] (**) Option "xkb_model" "pc104"
    [ 2030.752] (**) Option "xkb_layout" "us"
    [ 2030.752] (II) XKB: Reusing cached keymap
    [ 2031.256] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.256] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.256] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.256] (**) NVIDIA(0): all display devices.)
    [ 2031.256] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.256] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.256] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.256] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.256] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.257] (II) NVIDIA(GPU-0):
    [ 2031.257] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.257] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.258] (II) NVIDIA(GPU-0):
    [ 2031.506] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.506] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.506] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.506] (**) NVIDIA(0): all display devices.)
    [ 2031.506] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.506] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.506] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.506] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.506] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2031.509] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.509] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2046.582] (II) evdev: HP WMI hotkeys: Close
    [ 2046.582] (II) UnloadModule: "evdev"
    [ 2046.623] (II) evdev: SynPS/2 Synaptics TouchPad: Close
    [ 2046.623] (II) UnloadModule: "evdev"
    [ 2046.663] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2046.663] (II) UnloadModule: "evdev"
    [ 2046.702] (II) evdev: HP Truevision HD: Close
    [ 2046.702] (II) UnloadModule: "evdev"
    [ 2046.741] (II) evdev: Power Button: Close
    [ 2046.741] (II) UnloadModule: "evdev"
    [ 2046.794] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 2046.795] (EE) Server terminated successfully (0). Closing log file.
    xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
    Section "Module"
    Load "glx"
    EndSection
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    # VendorName "Unknown"
    # ModelName "Unknown"
    # HorizSync 28.0 - 33.0
    # VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0"
    # Option "UseEDID" "true"
    Option "ConnectedMonitor" "DFP-0"
    # Option "CustomEDID" "CRT-0:/etc/X11/1280x1024.bin"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection

    dmesg :
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009a3befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009a3bf000-0x000000009aebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ENVY dv7 Notebook PC/181D, BIOS F.12 09/03/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FE0000000 write-back
    [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25F600000 mask FFFE00000 uncachable
    [ 0.000000] 8 base 25F800000 mask FFF800000 uncachable
    [ 0.000000] 9 base 260000000 mask FE0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
    [ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
    [ 0.000000] [mem 0x25c000000-0x25f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
    [ 0.000000] [mem 0x200000000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0x9a3befff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0x9a1fffff] page 2M
    [ 0.000000] [mem 0x9a200000-0x9a3befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
    [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x379b0000-0x37ccffff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009affe210 0000A4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
    [ 0.000000] ACPI: FACP 000000009affb000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: DSDT 000000009afe4000 0130E0 (v01 HPQOEM 181D 00000000 ACPI 00040000)
    [ 0.000000] ACPI: FACS 000000009afb8000 000040
    [ 0.000000] ACPI: UEFI 000000009affd000 000236 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASF! 000000009affc000 0000A5 (v32 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: HPET 000000009affa000 000038 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: APIC 000000009aff9000 00008C (v03 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MCFG 000000009aff8000 00003C (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: WDAT 000000009afe3000 000224 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afe1000 001068 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 000000009afdf000 000028 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASPT 000000009afdd000 000034 (v07 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: DBGP 000000009afdc000 000034 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: FPDT 000000009afda000 000044 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MSDM 000000009afd9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd8000 000926 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd7000 000A92 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd3000 002E84 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
    [ 0.000000] NODE_DATA [mem 0x25f5f3000-0x25f5f7fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0x9a3befff]
    [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
    [ 0.000000] node 0: [mem 0x100000000-0x25f5fffff]
    [ 0.000000] On node 0 totalpages: 2070351
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9799 pages used for memmap
    [ 0.000000] DMA32 zone: 627135 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22488 pages used for memmap
    [ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9a3bf000-0x9aebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037979
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8068224K/8281404K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 213180K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.589 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.72 BogoMIPS (lpj=7981963)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000023] Security Framework initialized
    [ 0.000029] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000030] Yama: becoming mindful.
    [ 0.000417] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.001940] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.002614] Mount-cache hash table entries: 256
    [ 0.002739] Initializing cgroup subsys memory
    [ 0.002743] Initializing cgroup subsys devices
    [ 0.002744] Initializing cgroup subsys freezer
    [ 0.002746] Initializing cgroup subsys net_cls
    [ 0.002747] Initializing cgroup subsys blkio
    [ 0.002763] CPU: Physical Processor ID: 0
    [ 0.002764] CPU: Processor Core ID: 0
    [ 0.002768] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.003048] mce: CPU supports 9 MCE banks
    [ 0.003058] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003064] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 2
    [ 0.003142] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
    [ 0.003906] ACPI: Core revision 20131115
    [ 0.009053] ACPI: All ACPI Tables successfully acquired
    [ 0.053822] ftrace: allocating 21057 entries in 83 pages
    [ 0.061910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.094942] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.094948] TSC deadline timer enabled
    [ 0.094955] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.094960] ... version: 3
    [ 0.094960] ... bit width: 48
    [ 0.094961] ... generic registers: 4
    [ 0.094962] ... value mask: 0000ffffffffffff
    [ 0.094962] ... max period: 0000ffffffffffff
    [ 0.094963] ... fixed-purpose events: 3
    [ 0.094964] ... event mask: 000000070000000f
    [ 0.121742] x86: Booting SMP configuration:
    [ 0.135256] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.121746] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.256907] x86: Booted up 1 node, 8 CPUs
    [ 0.256909] smpboot: Total of 8 processors activated (38328.81 BogoMIPS)
    [ 0.262487] devtmpfs: initialized
    [ 0.264464] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
    [ 0.265037] RTC time: 21:55:49, date: 02/28/14
    [ 0.265063] NET: Registered protocol family 16
    [ 0.265128] cpuidle: using governor ladder
    [ 0.265129] cpuidle: using governor menu
    [ 0.265147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.265148] ACPI: bus type PCI registered
    [ 0.265150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.265197] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.265199] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.282064] PCI: Using configuration type 1 for base access
    [ 0.282527] bio: create slab <bio-0> at 0
    [ 0.282615] ACPI: Added _OSI(Module Device)
    [ 0.282616] ACPI: Added _OSI(Processor Device)
    [ 0.282617] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.282618] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.285086] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.312765] ACPI Error: No handler for Region [RAM_] (ffff880253874090) [EmbeddedControl] (20131115/evregion-162)
    [ 0.312767] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
    [ 0.312770] ACPI Error: Method parse/execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/psparse-536)
    [ 0.312774] ACPI Error: Method execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/uteval-103)
    [ 0.313004] ACPI: SSDT 000000009ae3a018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.313310] ACPI: Dynamic OEM Table Load:
    [ 0.313311] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.325950] ACPI: SSDT 000000009aeada98 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.326272] ACPI: Dynamic OEM Table Load:
    [ 0.326273] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.339208] ACPI: SSDT 000000009ababd98 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 0.339508] ACPI: Dynamic OEM Table Load:
    [ 0.339509] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 1.238575] ACPI: Interpreter enabled
    [ 1.238580] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 1.238584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 1.238594] ACPI: (supports S0 S3 S4 S5)
    [ 1.238595] ACPI: Using IOAPIC for interrupt routing
    [ 1.238612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.238799] ACPI: ACPI Dock Station Driver: 1 docks/bays found
    [ 1.260983] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
    [ 1.321167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 1.321171] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.321214] \_SB_.PCI0:_OSC invalid UUID
    [ 1.321215] _OSC request data:1 1f 0
    [ 1.321218] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 1.321676] PCI host bridge to bus 0000:00
    [ 1.321678] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 1.321679] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.321680] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.321682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.321683] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 1.321688] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 1.321749] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 1.321772] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.321801] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.321826] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 1.321834] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
    [ 1.321839] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.321842] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
    [ 1.321916] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 1.321936] pci 0000:00:14.0: reg 0x10: [mem 0xd4600000-0xd460ffff 64bit]
    [ 1.322002] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.322033] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 1.322061] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 1.322083] pci 0000:00:16.0: reg 0x10: [mem 0xd4614000-0xd461400f 64bit]
    [ 1.322154] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.322218] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 1.322238] pci 0000:00:1a.0: reg 0x10: [mem 0xd4619000-0xd46193ff]
    [ 1.322321] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.322363] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.322390] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 1.322404] pci 0000:00:1b.0: reg 0x10: [mem 0xd4610000-0xd4613fff 64bit]
    [ 1.322466] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.322498] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.322527] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 1.322652] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.322697] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.322726] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 1.322855] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.322900] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.322929] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 1.323056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.323100] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.323125] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
    [ 1.323197] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.323232] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 1.323263] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 1.323282] pci 0000:00:1d.0: reg 0x10: [mem 0xd4618000-0xd46183ff]
    [ 1.323366] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.323407] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.323434] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 1.323584] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
    [ 1.323601] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
    [ 1.323608] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
    [ 1.323615] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
    [ 1.323623] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
    [ 1.323630] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
    [ 1.323637] pci 0000:00:1f.2: reg 0x24: [mem 0xd4617000-0xd46177ff]
    [ 1.323678] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.323727] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 1.323741] pci 0000:00:1f.3: reg 0x10: [mem 0xd4615000-0xd46150ff 64bit]
    [ 1.323760] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
    [ 1.323853] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
    [ 1.323862] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
    [ 1.323869] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.323875] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
    [ 1.323880] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
    [ 1.323884] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 1.323917] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 1.330552] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.330557] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.330562] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.330568] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.330681] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.330867] pci 0000:08:00.0: [10ec:5229] type 00 class 0xff0000
    [ 1.330931] pci 0000:08:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
    [ 1.331423] pci 0000:08:00.0: supports D1 D2
    [ 1.331424] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
    [ 1.331502] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 1.337279] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.337286] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.337294] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.337304] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.337465] pci 0000:0a:00.0: [8086:0887] type 00 class 0x028000
    [ 1.337511] pci 0000:0a:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit]
    [ 1.337733] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
    [ 1.337776] pci 0000:0a:00.0: System wakeup disabled by ACPI
    [ 1.343946] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.343959] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.344076] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.344094] pci 0000:0b:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.344127] pci 0000:0b:00.0: reg 0x18: [mem 0xd4404000-0xd4404fff 64bit pref]
    [ 1.344147] pci 0000:0b:00.0: reg 0x20: [mem 0xd4400000-0xd4403fff 64bit pref]
    [ 1.344234] pci 0000:0b:00.0: supports D1 D2
    [ 1.344236] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.373952] pci 0000:0b:00.0: System wakeup disabled by ACPI
    [ 1.380639] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.380647] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.380654] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.381137] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381174] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381209] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381244] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381278] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381313] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381348] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381384] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381615] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 1.381620] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.381661] Found 1 acpi root devices
    [ 1.381686] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.381736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.381739] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.381740] vgaarb: loaded
    [ 1.381741] vgaarb: bridge control possible 0000:01:00.0
    [ 1.381741] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.381759] PCI: Using ACPI for IRQ routing
    [ 1.387711] PCI: pci_cache_line_size set to 64 bytes
    [ 1.387850] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
    [ 1.387851] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 1.387852] e820: reserve RAM buffer [mem 0x9a3bf000-0x9bffffff]
    [ 1.387853] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
    [ 1.387854] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
    [ 1.387910] NetLabel: Initializing
    [ 1.387911] NetLabel: domain hash size = 128
    [ 1.387912] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.387923] NetLabel: unlabeled traffic allowed by default
    [ 1.387936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.387940] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.389961] Switched to clocksource hpet
    [ 1.392856] pnp: PnP ACPI init
    [ 1.392865] ACPI: bus type PNP registered
    [ 1.392884] pnp 00:00: [dma 4]
    [ 1.392898] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.392912] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.392979] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.392999] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.393026] system 00:04: [io 0x1100-0x110f] has been reserved
    [ 1.393028] system 00:04: [io 0xffff] has been reserved
    [ 1.393029] system 00:04: [io 0xffff] has been reserved
    [ 1.393031] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 1.393032] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 1.393033] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.393035] system 00:04: [io 0x1200-0x1207] has been reserved
    [ 1.393036] system 00:04: [mem 0xfe800000-0xfe8001ff] has been reserved
    [ 1.393038] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393055] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.393085] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 1.393087] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.393126] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 1.393148] pnp 00:08: Plug and Play ACPI device, IDs SYN1e5e SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.393228] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.393230] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.393231] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.393233] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.393234] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    [ 1.393235] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.393237] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.393238] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.393239] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.393241] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
    [ 1.393242] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393419] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.393420] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.393422] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.393458] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.393478] pnp: PnP ACPI: found 12 devices
    [ 1.393479] ACPI: bus type PNP unregistered
    [ 1.399368] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 1.399417] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
    [ 1.399419] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.399420] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.399422] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.399424] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399427] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.399444] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.399447] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.399452] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.399456] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399465] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.399471] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.399482] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.399485] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.399489] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.399497] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.399499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.399500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.399501] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
    [ 1.399502] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.399503] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd3ffffff]
    [ 1.399505] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399506] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
    [ 1.399507] pci_bus 0000:08: resource 1 [mem 0xd1000000-0xd1ffffff]
    [ 1.399508] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399510] pci_bus 0000:0a: resource 1 [mem 0xd4500000-0xd45fffff]
    [ 1.399511] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
    [ 1.399512] pci_bus 0000:0b: resource 1 [mem 0xd4400000-0xd44fffff]
    [ 1.399530] NET: Registered protocol family 2
    [ 1.399642] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 1.399750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.399849] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.399860] TCP: reno registered
    [ 1.399870] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399937] NET: Registered protocol family 1
    [ 1.399946] pci 0000:00:02.0: Boot video device
    [ 1.780500] PCI: CLS 64 bytes, default 64
    [ 1.780530] Unpacking initramfs...
    [ 1.820767] Freeing initrd memory: 3200K (ffff8800379b0000 - ffff880037cd0000)
    [ 1.820771] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.820773] software IO TLB [mem 0x963bf000-0x9a3bf000] (64MB) mapped at [ffff8800963bf000-ffff88009a3befff]
    [ 1.820794] Simple Boot Flag at 0x44 set to 0x1
    [ 1.820989] Scanning for low memory corruption every 60 seconds
    [ 1.821175] audit: initializing netlink socket (disabled)
    [ 1.821183] type=2000 audit(1393624549.773:1): initialized
    [ 1.830154] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.831019] zbud: loaded
    [ 1.831130] VFS: Disk quotas dquot_6.5.2
    [ 1.831155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.831254] msgmni has been set to 15764
    [ 1.831287] Key type big_key registered
    [ 1.831483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.831523] io scheduler noop registered
    [ 1.831524] io scheduler deadline registered
    [ 1.831539] io scheduler cfq registered (default)
    [ 1.831652] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.832086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.832096] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.832122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 1.832123] vesafb: scrolling: redraw
    [ 1.832124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.832682] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k
    [ 1.946268] Console: switching to colour frame buffer device 240x67
    [ 2.059378] fb0: VESA VGA frame buffer device
    [ 2.059386] intel_idle: MWAIT substates: 0x21120
    [ 2.059387] intel_idle: v0.4 model 0x3A
    [ 2.059387] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.059528] GHES: HEST is not enabled!
    [ 2.059562] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.059853] Linux agpgart interface v0.103
    [ 2.059899] rtc_cmos 00:05: RTC can wake from S4
    [ 2.060005] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.060033] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 2.060039] Intel P-state driver initializing.
    [ 2.060046] Intel pstate controlling: cpu 0
    [ 2.060056] Intel pstate controlling: cpu 1
    [ 2.060066] Intel pstate controlling: cpu 2
    [ 2.060075] Intel pstate controlling: cpu 3
    [ 2.060081] Intel pstate controlling: cpu 4
    [ 2.060087] Intel pstate controlling: cpu 5
    [ 2.060094] Intel pstate controlling: cpu 6
    [ 2.060101] Intel pstate controlling: cpu 7
    [ 2.060170] drop_monitor: Initializing network drop monitor service
    [ 2.060205] TCP: cubic registered
    [ 2.060258] NET: Registered protocol family 10
    [ 2.060356] NET: Registered protocol family 17
    [ 2.060361] Key type dns_resolver registered
    [ 2.060562] registered taskstats version 1
    [ 2.061180] Magic number: 2:200:956
    [ 2.061210] memory memory9: hash matches
    [ 2.061260] rtc_cmos 00:05: setting system clock to 2014-02-28 21:55:50 UTC (1393624550)
    [ 2.061289] PM: Hibernation image not present or could not be loaded.
    [ 2.061821] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
    [ 2.061822] Write protecting the kernel read-only data: 8192k
    [ 2.063314] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
    [ 2.064187] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
    [ 2.070995] systemd-udevd[76]: starting version 208
    [ 2.081683] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.086896] rtsx_pci 0000:08:00.0: irq 41 for MSI/MSI-X
    [ 2.086940] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
    [ 2.087062] ACPI: bus type USB registered
    [ 2.087089] usbcore: registered new interface driver usbfs
    [ 2.087162] usbcore: registered new interface driver hub
    [ 2.087210] usbcore: registered new device driver usb
    [ 2.087615] SCSI subsystem initialized
    [ 2.087789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.087987] ehci-pci: EHCI PCI platform driver
    [ 2.088114] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.088121] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.088137] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.088526] libata version 3.00 loaded.
    [ 2.092034] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.092051] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4619000
    [ 2.103911] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.104041] hub 1-0:1.0: USB hub found
    [ 2.104046] hub 1-0:1.0: 2 ports detected
    [ 2.104210] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.104214] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.104225] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.107112] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.107123] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.108127] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.108140] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4618000
    [ 2.117274] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.117508] hub 2-0:1.0: USB hub found
    [ 2.117514] hub 2-0:1.0: 2 ports detected
    [ 2.117750] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.117756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 2.117854] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 2.117873] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 2.118100] hub 3-0:1.0: USB hub found
    [ 2.118108] hub 3-0:1.0: 4 ports detected
    [ 2.118349] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.118351] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 2.118452] hub 4-0:1.0: USB hub found
    [ 2.118462] hub 4-0:1.0: 4 ports detected
    [ 2.135939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.150760] ahci 0000:00:1f.2: version 3.0
    [ 2.150968] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 2.164071] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl RAID mode
    [ 2.164079] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 2.171405] scsi0 : ahci
    [ 2.171666] scsi1 : ahci
    [ 2.171894] scsi2 : ahci
    [ 2.172116] scsi3 : ahci
    [ 2.172313] scsi4 : ahci
    [ 2.172447] scsi5 : ahci
    [ 2.172504] ata1: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617100 irq 43
    [ 2.172514] ata2: DUMMY
    [ 2.172516] ata3: DUMMY
    [ 2.172517] ata4: DUMMY
    [ 2.172519] ata5: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617300 irq 43
    [ 2.172520] ata6: DUMMY
    [ 2.410959] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.491002] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.491072] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.502872] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
    [ 2.502878] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.506430] ata5.00: ATAPI: hp DVD-RAM UJ8D1, H.01, max UDMA/100
    [ 2.512780] ata1.00: configured for UDMA/133
    [ 2.513113] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
    [ 2.524950] ata5.00: configured for UDMA/100
    [ 2.531477] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8D1 H.01 PQ: 0 ANSI: 5
    [ 2.534925] hub 1-1:1.0: USB hub found
    [ 2.534975] hub 1-1:1.0: 6 ports detected
    [ 2.536606] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 2.536677] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.536680] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.536701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.537540] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
    [ 2.538190] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.542465] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.542469] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.542686] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 2.608731] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.651327] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 2.651588] systemd[1]: No hostname configured.
    [ 2.651596] systemd[1]: Set hostname to <localhost>.
    [ 2.653530] random: systemd urandom read with 42 bits of entropy available
    [ 2.657173] systemd-fstab-generator[151]: Checking was requested for "nas:/mnt/HD/HD_a2/STORE01", but it is not a device.
    [ 2.687501] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 2.687558] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 2.687572] systemd[1]: Starting Login Prompts.
    [ 2.687585] systemd[1]: Reached target Login Prompts.
    [ 2.687595] systemd[1]: Starting Remote File Systems.
    [ 2.687605] systemd[1]: Reached target Remote File Systems.
    [ 2.687615] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 2.687642] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 2.687652] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 2.687669] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 2.687679] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 2.687712] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 2.687722] systemd[1]: Starting Delayed Shutdown Socket.
    [ 2.687759] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 2.687772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 2.687812] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 2.687822] systemd[1]: Starting Paths.
    [ 2.687832] systemd[1]: Reached target Paths.
    [ 2.687842] systemd[1]: Starting Journal Socket.
    [ 2.687878] systemd[1]: Listening on Journal Socket.
    [ 2.687895] systemd[1]: Mounting Debug File System...
    [ 2.688266] systemd[1]: Starting Journal Service...
    [ 2.688521] systemd[1]: Started Journal Service.
    [ 2.694471] usb 3-3: new full-speed USB device number 2 using xhci_hcd
    [ 2.702863] systemd-journald[157]: Vacuuming done, freed 0 bytes
    [ 2.708483] FS-Cache: Loaded
    [ 2.710845] usb 3-3: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.713390] RPC: Registered named UNIX socket transport module.
    [ 2.713392] RPC: Registered udp transport module.
    [ 2.713393] RPC: Registered tcp transport module.
    [ 2.713394] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 2.718880] FS-Cache: Netfs 'nfs' registered for caching
    [ 2.728296] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 2.741906] systemd-udevd[202]: starting version 208
    [ 2.779466] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 2.780942] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 2.780948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780952] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780955] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780958] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780963] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780966] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780969] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780971] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780973] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.782830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 2.785766] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 2.791210] ACPI: Lid Switch [LID0]
    [ 2.791504] [drm] Initialized drm 1.1.0 20060810
    [ 2.791605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 2.791609] ACPI: Power Button [PWRF]
    [ 2.792665] wmi: Mapper loaded
    [ 2.792681] hp_accel: laptop model unknown, using default axes configuration
    [ 2.797256] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 2.802959] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.802966] r8169 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.803223] r8169 0000:0b:00.0: irq 46 for MSI/MSI-X
    [ 2.803494] r8169 0000:0b:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011eee000, a0:b3:cc:4b:1a:7e, XID 0c900800 IRQ 46
    [ 2.803496] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.811332] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.815328] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 2.816642] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 2.816644] Copyright(c) 2003-2013 Intel Corporation
    [ 2.816736] iwlwifi 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.816860] iwlwifi 0000:0a:00.0: irq 47 for MSI/MSI-X
    [ 2.817888] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 2.818258] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.818636] platform microcode: Direct firmware load failed with error -2
    [ 2.818639] platform microcode: Falling back to user helper
    [ 2.821802] iwlwifi 0000:0a:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 2.824537] tsc: Refined TSC clocksource calibration: 2394.561 MHz
    [ 2.826546] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.828014] usbcore: registered new interface driver usbhid
    [ 2.828016] usbhid: USB HID core driver
    [ 2.832266] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 2.832334] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 2.832373] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 2.832658] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
    [ 2.832662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.834846] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 2.834848] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 2.834850] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 2.834851] iwlwifi 0000:0a:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
    [ 2.834955] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 2.835666] usbcore: registered new interface driver snd-usb-audio
    [ 2.854044] iTCO_vendor_support: vendor-support=0
    [ 2.854466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.854514] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.854638] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.856761] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.860498] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.860514] platform microcode: Direct firmware load failed with error -2
    [ 2.860516] platform microcode: Falling back to user helper
    [ 2.863566] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.3/input/input10
    [ 2.863734] hid-generic 0003:08BB:2902.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-3/input3
    [ 2.867484] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.867498] platform microcode: Direct firmware load failed with error -2
    [ 2.867500] platform microcode: Falling back to user helper
    [ 2.870088] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870100] platform microcode: Direct firmware load failed with error -2
    [ 2.870102] platform microcode: Falling back to user helper
    [ 2.870542] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870561] platform microcode: Direct firmware load failed with error -2
    [ 2.870563] platform microcode: Falling back to user helper
    [ 2.871275] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871285] platform microcode: Direct firmware load failed with error -2
    [ 2.871288] platform microcode: Falling back to user helper
    [ 2.871938] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871949] platform microcode: Direct firmware load failed with error -2
    [ 2.871952] platform microcode: Falling back to user helper
    [ 2.872242] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.872254] platform microcode: Direct firmware load failed with error -2
    [ 2.872257] platform microcode: Falling back to user helper
    [ 2.872575] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.878423] systemd-udevd[206]: renamed network interface eth0 to eno1
    [ 2.881987] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 2.890802] systemd-journald[157]: Received request to flush runtime journal from PID 1
    [ 2.901323] systemd-udevd[217]: renamed network interface wlan0 to wlo1
    [ 2.908030] ACPI: AC Adapter [ADP1] (on-line)
    [ 2.941825] hub 2-1:1.0: USB hub found
    [ 2.941930] hub 2-1:1.0: 8 ports detected
    [ 3.021509] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 3.061674] intel_rapl: domain uncore energy ctr 8617:8617 not working, skip
    [ 3.074806] lis3lv02d: 8 bits 3DC sensor found
    [ 3.135241] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.142912] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.171642] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 3.233041] nvidia: module license 'NVIDIA' taints kernel.
    [ 3.233045] Disabling lock debugging due to kernel taint
    [ 3.238226] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
    [ 3.238279] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.238457] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
    [ 3.238462] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
    [ 3.356112] media: Linux media interface: v0.10
    [ 3.360422] Linux video capture interface: v2.00
    [ 3.365597] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:033a)
    [ 3.377291] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
    [ 3.377488] usbcore: registered new interface driver uvcvideo
    [ 3.377494] USB Video Class driver (1.1.1)
    [ 3.393157] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.400907] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.425257] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
    [ 3.458983] input: HP WMI hotkeys as /devices/virtual/input/input9
    [ 3.473371] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 3.521478] Bluetooth: Core ver 2.17
    [ 3.521492] NET: Registered protocol family 31
    [ 3.521493] Bluetooth: HCI device and connection manager initialized
    [ 3.521499] Bluetooth: HCI socket layer initialized
    [ 3.521501] Bluetooth: L2CAP socket layer initialized
    [ 3.521505] Bluetooth: SCO socket layer initialized
    [ 3.523209] usbcore: registered new interface driver btusb
    [ 3.597251] r8169 0000:0b:00.0 eno1: link down
    [ 3.597286] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
    [ 3.825665] Switched to clocksource tsc
    [ 4.034513] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2055, fw id: 1107424
    [ 4.062727] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
    [ 4.071722] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071771] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071795] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071832] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071854] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071922] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071944] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.104186] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
    [ 4.107557] mousedev: PS/2 mouse device common for all mice
    [ 4.326086] thermal LNXTHERM:00: registered as thermal_zone1
    [ 4.326092] ACPI: Thermal Zone [TZS0] (69 C)
    [ 4.606281] [Firmware Bug]: No valid trip found
    [ 5.280111] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
    [ 5.283560] random: nonblocking pool is initialized
    [ 5.694087] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.035020] thermal LNXTHERM:02: registered as thermal_zone2
    [ 7.035026] ACPI: Thermal Zone [TZS2] (57 C)
    [ 8.889924] thermal LNXTHERM:03: registered as thermal_zone3
    [ 8.889929] ACPI: Thermal Zone [TZS3] (30 C)
    [ 9.408442] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 10.251376] type=1006 audit(1393624558.679:2): pid=348 uid=0 old auid=4294967295 new auid=120 old ses=4294967295 new ses=1 res=1
    [ 11.338226] traps: gnome-shell[416] trap int3 ip:7f1024ce4289 sp:7fffc13c81f0 error:0
    [ 33.022441] type=1006 audit(1393624581.429:3): pid=439 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=2 res=1
    [ 33.028194] type=1006 audit(1393624581.436:4): pid=440 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=3 res=1
    lsmod
    Module Size Used by
    joydev 9631 0
    mousedev 10247 0
    btusb 19648 0
    bluetooth 326343 2 btusb
    uvcvideo 72804 0
    videobuf2_vmalloc 3304 1 uvcvideo
    videobuf2_memops 2335 1 videobuf2_vmalloc
    videobuf2_core 28243 1 uvcvideo
    videodev 111840 2 uvcvideo,videobuf2_core
    media 11719 2 uvcvideo,videodev
    nvidia 10621191 29
    intel_rapl 11776 0
    x86_pkg_temp_thermal 6991 0
    intel_powerclamp 8802 0
    coretemp 6358 0
    kvm_intel 131532 0
    kvm 396221 1 kvm_intel
    crct10dif_pclmul 4682 0
    crct10dif_common 1372 1 crct10dif_pclmul
    crc32_pclmul 2923 0
    crc32c_intel 14185 0
    ghash_clmulni_intel 4405 0
    aesni_intel 45548 0
    aes_x86_64 7399 1 aesni_intel
    lrw 3565 1 aesni_intel
    gf128mul 5858 1 lrw
    glue_helper 4417 1 aesni_intel
    ablk_helper 2004 1 aesni_intel
    cryptd 8409 3 ghash_clmulni_intel,aesni_intel,ablk_helper
    hid_generic 1153 0
    hp_wmi 7595 0
    sparse_keymap 3146 1 hp_wmi
    arc4 2000 2
    iTCO_wdt 5407 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    mxm_wmi 1467 0
    iwldvm 167738 0
    mac80211 474681 1 iwldvm
    snd_usb_audio 117811 0
    usbhid 40545 0
    snd_usbmidi_lib 19755 1 snd_usb_audio
    hid 90902 2 hid_generic,usbhid
    snd_rawmidi 18742 1 snd_usbmidi_lib
    snd_seq_device 5180 1 snd_rawmidi
    microcode 15216 0
    evdev 11045 11
    psmouse 88171 0
    snd_hda_codec_hdmi 36379 1
    iwlwifi 140193 1 iwldvm
    serio_raw 5009 0
    snd_hda_codec_idt 43508 1
    cfg80211 408199 3 iwlwifi,mac80211,iwldvm
    i2c_i801 11269 0
    rtsx_pci_ms 7258 0
    r8169 58423 0
    memstick 7504 1 rtsx_pci_ms
    rfkill 15651 4 cfg80211,hp_wmi,bluetooth
    mii 4027 1 r8169
    thermal 8556 0
    snd_hda_intel 37352 0
    snd_hda_codec 150017 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
    intel_gtt 12664 0
    drm_kms_helper 35710 0
    snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
    drm 239102 3 drm_kms_helper,nvidia
    battery 7565 0
    snd_pcm 77822 4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    ac 3334 0
    snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    hp_accel 16520 0
    i2c_algo_bit 5391 0
    mei_me 9552 0
    i2c_core 24760 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
    lis3lv02d 11283 1 hp_accel
    input_polldev 2818 1 lis3lv02d
    snd 59029 11 snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    shpchp 25425 0
    mei 62867 1 mei_me
    wmi 8251 2 hp_wmi,mxm_wmi
    video 11425 0
    soundcore 5418 1 snd
    lpc_ich 13368 0
    processor 24620 0
    button 4605 0
    nfs 191568 0
    lockd 76942 1 nfs
    sunrpc 233786 2 nfs,lockd
    fscache 47797 1 nfs
    ext4 473259 2
    crc16 1359 2 ext4,bluetooth
    mbcache 6074 1 ext4
    jbd2 80912 1 ext4
    sr_mod 14930 0
    cdrom 34880 1 sr_mod
    sd_mod 31361 3
    atkbd 16806 0
    libps2 4187 2 atkbd,psmouse
    rtsx_pci_sdmmc 13911 0
    mmc_core 95465 1 rtsx_pci_sdmmc
    ahci 23048 2
    libahci 21698 1 ahci
    libata 172104 2 ahci,libahci
    ehci_pci 3928 0
    xhci_hcd 144553 0
    ehci_hcd 64171 1 ehci_pci
    scsi_mod 132250 3 libata,sd_mod,sr_mod
    rtsx_pci 32241 2 rtsx_pci_ms,rtsx_pci_sdmmc
    usbcore 180208 8 btusb,snd_usb_audio,uvcvideo,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
    usb_common 1648 1 usbcore
    i8042 13366 1 libps2
    serio 10721 6 serio_raw,atkbd,i8042,psmouse

  • [SLOVED] All my USB not work after upgrade system.

    Hello all,
    I'm new in Arch, and i install my system with your LiveCD (2005).
    In the first boot, all work good. But after upgrade (pacman -Syu), all my USB device (Keyboard, Mouse) not work.
    I'm not using (yet) with Xorg, just in command shell (tty1), But i can't press anything cuz my keyboard not work.
    I try to do that (https://bbs.archlinux.org/viewtopic.php … 19#p906119), but no work to me too.
    What i can to do to fix this?
    My dmesg:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
    Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bf564000 (usable)
    BIOS-e820: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
    BIOS-e820: 00000000bf5bb000 - 00000000bf5db000 (reserved)
    BIOS-e820: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
    BIOS-e820: 00000000bf5ec000 - 00000000bf600000 (reserved)
    BIOS-e820: 00000000bf600000 - 00000000bf602000 (usable)
    BIOS-e820: 00000000bf602000 - 00000000bf603000 (ACPI data)
    BIOS-e820: 00000000bf603000 - 00000000bf60b000 (reserved)
    BIOS-e820: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
    BIOS-e820: 00000000bf615000 - 00000000bf63e000 (reserved)
    BIOS-e820: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
    BIOS-e820: 00000000bf681000 - 00000000bf800000 (usable)
    BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
    NX (Execute Disable) protection: active
    DMI 2.6 present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    No AGP bridge found
    last_pfn = 0x23f800 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-E7FFF uncachable
    E8000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask E00000000 write-back
    1 base 200000000 mask FC0000000 write-back
    2 base 0C0000000 mask FC0000000 uncachable
    3 base 23F800000 mask FFF800000 uncachable
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    8 disabled
    9 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009ec00 (usable)
    modified: 000000000009ec00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bf564000 (usable)
    modified: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
    modified: 00000000bf5bb000 - 00000000bf5db000 (reserved)
    modified: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
    modified: 00000000bf5ec000 - 00000000bf600000 (reserved)
    modified: 00000000bf600000 - 00000000bf602000 (usable)
    modified: 00000000bf602000 - 00000000bf603000 (ACPI data)
    modified: 00000000bf603000 - 00000000bf60b000 (reserved)
    modified: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
    modified: 00000000bf615000 - 00000000bf63e000 (reserved)
    modified: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
    modified: 00000000bf681000 - 00000000bf800000 (usable)
    modified: 00000000fed1c000 - 00000000fed20000 (reserved)
    modified: 00000000ff000000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 000000023f800000 (usable)
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000fcda0] fcda0
    init_memory_mapping: 0000000000000000-00000000bf800000
    0000000000 - 00bf800000 page 2M
    kernel direct mapping tables up to bf800000 @ 16000-1a000
    init_memory_mapping: 0000000100000000-000000023f800000
    0100000000 - 023f800000 page 2M
    kernel direct mapping tables up to 23f800000 @ 18000-22000
    RAMDISK: 37c44000 - 37e19ab8
    ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
    ACPI: XSDT 00000000bf5ae068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
    ACPI: FACP 00000000bf5b7ba0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    ACPI: DSDT 00000000bf5ae140 09A5C (v02 ALASKA A M I 00000000 INTL 20051117)
    ACPI: FACS 00000000bf60cf80 00040
    ACPI: APIC 00000000bf5b7c98 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
    ACPI: SSDT 00000000bf5b7d10 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
    ACPI: MCFG 00000000bf5b7e18 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    ACPI: HPET 00000000bf5b7e58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
    ACPI: Local APIC address 0xfee00000
    (13 early reservations) ==> bootmem [0000000000 - 023f800000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0001000000 - 00016d7b38] TEXT DATA BSS ==> [0001000000 - 00016d7b38]
    #2 [0037c44000 - 0037e19ab8] RAMDISK ==> [0037c44000 - 0037e19ab8]
    #3 [00016d8000 - 00016d826b] BRK ==> [00016d8000 - 00016d826b]
    #4 [00000fcdb0 - 0000100000] BIOS reserved ==> [00000fcdb0 - 0000100000]
    #5 [00000fcda0 - 00000fcdb0] MP-table mpf ==> [00000fcda0 - 00000fcdb0]
    #6 [000009ec00 - 00000fca90] BIOS reserved ==> [000009ec00 - 00000fca90]
    #7 [00000fcd24 - 00000fcda0] BIOS reserved ==> [00000fcd24 - 00000fcda0]
    #8 [00000fca90 - 00000fcd24] MP-table mpc ==> [00000fca90 - 00000fcd24]
    #9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
    #10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
    #11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
    #12 [0000018000 - 000001d000] PGTABLE ==> [0000018000 - 000001d000]
    [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x0023f800
    Movable zone start PFN for each node
    early_node_map[5] active PFN ranges
    0: 0x00000010 -> 0x0000009e
    0: 0x00000100 -> 0x000bf564
    0: 0x000bf600 -> 0x000bf602
    0: 0x000bf681 -> 0x000bf800
    0: 0x00100000 -> 0x0023f800
    On node 0 totalpages: 2092659
    DMA zone: 56 pages used for memmap
    DMA zone: 110 pages reserved
    DMA zone: 3816 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 765725 pages, LIFO batch:31
    Normal zone: 17892 pages used for memmap
    Normal zone: 1290780 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a701 base: 0xfed00000
    SMP: Allowing 4 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    PM: Registered nosave memory: 00000000bf564000 - 00000000bf5bb000
    PM: Registered nosave memory: 00000000bf5bb000 - 00000000bf5db000
    PM: Registered nosave memory: 00000000bf5db000 - 00000000bf5ec000
    PM: Registered nosave memory: 00000000bf5ec000 - 00000000bf600000
    PM: Registered nosave memory: 00000000bf602000 - 00000000bf603000
    PM: Registered nosave memory: 00000000bf603000 - 00000000bf60b000
    PM: Registered nosave memory: 00000000bf60b000 - 00000000bf615000
    PM: Registered nosave memory: 00000000bf615000 - 00000000bf63e000
    PM: Registered nosave memory: 00000000bf63e000 - 00000000bf681000
    PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000
    PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
    PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 29 pages/cpu @ffff880008a00000 s89176 r8192 d21416 u524288
    pcpu-alloc: s89176 r8192 d21416 u524288 alloc=1*2097152
    pcpu-alloc: [0] 0 1 2 3
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060321
    Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 8167004k/9428992k available (3449k kernel code, 1058356k absent, 202696k reserved, 1818k data, 484k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:768
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    allocated 83886080 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 3311.105 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.13 BogoMIPS (lpj=11037016)
    Security Framework initialized
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 9 MCE banks
    CPU0: Thermal monitoring enabled (TM1)
    CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
    using mwait in idle threads.
    Performance Events: Nehalem/Corei7 events, Intel PMU driver.
    ... version: 3
    ... bit width: 48
    ... generic registers: 8
    ... value mask: 0000ffffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 00000007000000ff
    ACPI: Core revision 20091214
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
    Booting Node 0, Processors #1
    CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
    #2
    CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
    #3 Ok.
    CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
    Brought up 4 CPUs
    Total of 4 processors activated (26499.22 BogoMIPS).
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
    PCI: not using MMCONFIG
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Executed 1 blocks of module-level executable AML code
    ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
    ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20091214/nsinit-340)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:16.0: reg 10: [mem 0xfe707000-0xfe70700f 64bit]
    pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:16.0: PME# disabled
    pci 0000:00:1a.0: reg 10: [mem 0xfe706000-0xfe7063ff]
    pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.0: PME# disabled
    pci 0000:00:1b.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.5: PME# disabled
    pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.6: PME# disabled
    pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.7: PME# disabled
    pci 0000:00:1d.0: reg 10: [mem 0xfe705000-0xfe7053ff]
    pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.0: PME# disabled
    pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
    pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
    pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
    pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
    pci 0000:00:1f.2: reg 20: [io 0xf090-0xf09f]
    pci 0000:00:1f.2: reg 24: [io 0xf080-0xf08f]
    pci 0000:00:1f.3: reg 10: [mem 0xfe704000-0xfe7040ff 64bit]
    pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
    pci 0000:00:1f.5: reg 10: [io 0xf070-0xf077]
    pci 0000:00:1f.5: reg 14: [io 0xf060-0xf063]
    pci 0000:00:1f.5: reg 18: [io 0xf050-0xf057]
    pci 0000:00:1f.5: reg 1c: [io 0xf040-0xf043]
    pci 0000:00:1f.5: reg 20: [io 0xf030-0xf03f]
    pci 0000:00:1f.5: reg 24: [io 0xf020-0xf02f]
    pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
    pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
    pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
    pci 0000:01:00.1: supports D1 D2
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:03:00.0: reg 10: [io 0xd040-0xd047]
    pci 0000:03:00.0: reg 14: [io 0xd030-0xd033]
    pci 0000:03:00.0: reg 18: [io 0xd020-0xd027]
    pci 0000:03:00.0: reg 1c: [io 0xd010-0xd013]
    pci 0000:03:00.0: reg 20: [io 0xd000-0xd00f]
    pci 0000:03:00.0: reg 30: [mem 0xfe500000-0xfe50ffff pref]
    pci 0000:03:00.0: supports D1 D2
    pci 0000:03:00.0: PME# supported from D1 D2 D3hot
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
    pci 0000:00:1c.5: PCI bridge to [bus 04-04]
    pci 0000:05:00.0: reg 10: [io 0xc000-0xc0ff]
    pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
    pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
    pci 0000:05:00.0: supports D1 D2
    pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:05:00.0: PME# disabled
    pci 0000:00:1c.6: PCI bridge to [bus 05-05]
    pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
    pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
    pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 14 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
    system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
    system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
    system 00:02: [io 0x0290-0x029f] has been reserved
    system 00:07: [io 0x04d0-0x04d1] has been reserved
    system 00:0b: [io 0x0400-0x0453] has been reserved
    system 00:0b: [io 0x0458-0x047f] has been reserved
    system 00:0b: [io 0x0500-0x057f] has been reserved
    system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
    system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
    system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
    system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
    system 00:0c: [io 0x0454-0x0457] has been reserved
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io disabled]
    pci 0000:00:1c.0: bridge window [mem disabled]
    pci 0000:00:1c.0: bridge window [mem pref disabled]
    pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
    pci 0000:00:1c.4: bridge window [mem pref disabled]
    pci 0000:00:1c.5: PCI bridge to [bus 04-04]
    pci 0000:00:1c.5: bridge window [io disabled]
    pci 0000:00:1c.5: bridge window [mem disabled]
    pci 0000:00:1c.5: bridge window [mem pref disabled]
    pci 0000:00:1c.6: PCI bridge to [bus 05-05]
    pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
    pci 0000:00:1c.6: bridge window [mem disabled]
    pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    pci 0000:06:00.0: PCI bridge to [bus 07-07]
    pci 0000:06:00.0: bridge window [io disabled]
    pci 0000:06:00.0: bridge window [mem disabled]
    pci 0000:06:00.0: bridge window [mem pref disabled]
    pci 0000:00:1c.7: PCI bridge to [bus 06-07]
    pci 0000:00:1c.7: bridge window [io disabled]
    pci 0000:00:1c.7: bridge window [mem disabled]
    pci 0000:00:1c.7: bridge window [mem pref disabled]
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.5: setting latency timer to 64
    pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.6: setting latency timer to 64
    pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1c.7: setting latency timer to 64
    pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:06:00.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
    pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
    pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
    pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
    pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    pci_bus 0000:06: resource 3 [io 0x0000-0xffff]
    pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff]
    pci_bus 0000:07: resource 6 [io 0x0000-0xffff]
    pci_bus 0000:07: resource 7 [mem 0x00000000-0xffffffffffffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    UDP hash table entries: 4096 (order: 5, 131072 bytes)
    UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    NET: Registered protocol family 1
    pci 0000:01:00.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1878k freed
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff88000979e000 - ffff88000d79e000
    software IO TLB at phys 0x979e000 - 0xd79e000
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1304838033.699:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 15956
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:01.0: setting latency timer to 64
    pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
    pcieport 0000:00:1c.0: setting latency timer to 64
    pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
    pcieport 0000:00:1c.4: setting latency timer to 64
    pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
    pcieport 0000:00:1c.5: setting latency timer to 64
    pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
    pcieport 0000:00:1c.6: setting latency timer to 64
    pcieport 0000:00:1c.6: irq 28 for MSI/MSI-X
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 484k freed
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:1f.2: version 2.13
    ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    ata_piix 0000:00:1f.2: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 20
    ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 20
    ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
    ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
    ata_piix 0000:00:1f.5: setting latency timer to 64
    scsi2 : ata_piix
    scsi3 : ata_piix
    ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 20
    ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 20
    pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pata_acpi 0000:03:00.0: setting latency timer to 64
    pata_acpi 0000:03:00.0: PCI INT A disabled
    ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
    ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata1.01: ATA-6: WDC WD1200JD-00GBB0, 02.05D02, max UDMA/100
    ata1.01: 234441648 sectors, multi 16: LBA48
    ata1.01: applying bridge limits
    ata1.00: configured for UDMA/133
    ata1.01: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
    scsi 0:0:1:0: Direct-Access ATA WDC WD1200JD-00G 02.0 PQ: 0 ANSI: 5
    ata2.01: failed to resume link (SControl 0)
    ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.01: SATA link down (SStatus 0 SControl 0)
    ata2.01: link offline, clearing class 3 to NONE
    ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max MWDMA2
    ata2.00: configured for MWDMA2
    ata2.00: qc timeout (cmd 0xa0)
    ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
    ata2.01: failed to resume link (SControl 0)
    ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.01: SATA link down (SStatus 0 SControl 0)
    ata2.01: link offline, clearing class 3 to NONE
    ata2.00: configured for MWDMA2
    ata2.00: qc timeout (cmd 0xa0)
    ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
    ata2.00: limiting SATA link speed to 1.5 Gbps
    ata2.00: limiting speed to MWDMA2:PIO3
    ata2.01: failed to resume link (SControl 0)
    ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata2.01: SATA link down (SStatus 0 SControl 0)
    ata2.01: link offline, clearing class 3 to NONE
    ata2.00: configured for MWDMA2
    ata2.00: qc timeout (cmd 0xa0)
    ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
    ata2.00: disabled
    ata2.00: hard resetting link
    ata2.01: hard resetting link
    ata2.01: failed to resume link (SControl 0)
    ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata2.01: SATA link down (SStatus 0 SControl 0)
    ata2.01: link offline, clearing class 3 to NONE
    ata2: EH complete
    pata_via 0000:03:00.0: version 0.3.4
    pata_via 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pata_via 0000:03:00.0: setting latency timer to 64
    scsi4 : pata_via
    scsi5 : pata_via
    ata5: PATA max UDMA/133 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 16
    ata6: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 16
    sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    sd 0:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    sd 0:0:1:0: [sdb] Write Protect is off
    sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
    sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb2 sdb3 sdb4 < sdb5 >
    sda: sda1 sda2
    sd 0:0:1:0: [sdb] Attached SCSI disk
    sda3
    sd 0:0:0:0: [sda] Attached SCSI disk
    EXT4-fs (sdb5): mounted filesystem with ordered data mode
    <30>udev[901]: starting version 167
    Adding 7030776k swap on /dev/sdb2. Priority:-1 extents:1 across:7030776k
    Thanks a lots.
    Last edited by KingYes (2011-05-08 11:03:55)

    FYI, the latest installation CD version is "2010.05". It's best to use the latest. Get it from http://www.archlinux.org/download/
    I'm not sure but I believe all other LiveCDs are custom made outside of the official Archlinux development team.
    I recommend downloading the CD I mentioned and follow this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide
    I've installed arch many times on different hardware and the only time I lost mouse and keyboard was after I removed "10-evdev.conf" and "10-quirks.conf" from /etc/X11/xorg.conf.d/. I copied both back from backups, rebooted and m&k were functional again. My guess is  "10-evdev.conf" was the file I needed. Check both these files exist.

  • Youtube and Pandora not working

    Youtube, Pandora and other streaming services are not working on any of my browsers. THey just show a blank screen. I tried all the methods on this website and nothing worked. I have no clue what's going on.
    System Information
    Time of this report: 4/7/2013, 15:59:46
           Machine name: TOMIWA_PC
       Operating System: Windows 8 Pro 32-bit (6.2, Build 9200) (9200.win8_gdr.130108-1504)
               Language: English (Regional Setting: English)
    System Manufacturer: Dell Inc.
           System Model: Inspiron 1720                  
                   BIOS: Phoenix ROM BIOS PLUS Version 1.10 A09
              Processor: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz (2 CPUs), ~2.4GHz
                 Memory: 3072MB RAM
    Available OS Memory: 3070MB RAM
              Page File: 2106MB used, 2051MB available
            Windows Dir: C:\WINDOWS
        DirectX Version: DirectX 11
    DX Setup Parameters: Not found
       User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
        DWM DPI Scaling: Disabled
         DxDiag Version: 6.02.9200.16384 32bit Unicode
    DxDiag Notes
          Display Tab 1: No problems found.
            Sound Tab 1: No problems found.
            Sound Tab 2: No problems found.
              Input Tab: No problems found.
    DirectX Debug Levels
    Direct3D:    0/4 (retail)
    DirectDraw:  0/4 (retail)
    DirectInput: 0/5 (retail)
    DirectMusic: 0/5 (retail)
    DirectPlay:  0/9 (retail)
    DirectSound: 0/5 (retail)
    DirectShow:  0/6 (retail)
    Display Devices
              Card name: NVIDIA GeForce 8600M GT (Microsoft Corporation - WDDM v1.2)                                
           Manufacturer: NVIDIA
              Chip type: GeForce 8600M GT
               DAC type: Integrated RAMDAC
            Device Type: Full Device
             Device Key: Enum\PCI\VEN_10DE&DEV_0407&SUBSYS_01F21028&REV_A1
         Display Memory: 1520 MB
       Dedicated Memory: 241 MB
          Shared Memory: 1279 MB
           Current Mode: 1440 x 900 (32 bit) (60Hz)
           Monitor Name: Generic PnP Monitor
          Monitor Model: unknown
             Monitor Id: LPL0000
            Native Mode: 1440 x 900(p) (60.042Hz)
            Output Type: Internal
            Driver Name: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
    Driver File Version: 9.18.0013.0286 (English)
         Driver Version:
            DDI Version: 10
         Feature Levels: 10.0,9.3,9.2,9.1
           Driver Model: WDDM 1.2
    Graphics Preemption: DMA
    Compute Preemption: DMA
      Driver Attributes: Final Retail
       Driver Date/Size: 6/27/2012 22:06:16, 15385960 bytes
            WHQL Logo'd: Yes
        WHQL Date Stamp:
      Device Identifier: {D7B71E3E-4747-11CF-8672-FF211CC2C435}
              Vendor ID: 0x10DE
              Device ID: 0x0407
              SubSys ID: 0x01F21028
            Revision ID: 0x00A1
    Driver Strong Name: nv_LH.inf:23f60d05b1bcf62a:Section018:9.18.13.286:pci\ven_10de&dev_0407&subsys_01f21028
         Rank Of Driver: 00E30001
            Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
            DXVA2 Modes: DXVA2_ModeMPEG2_IDCT  DXVA2_ModeVC1_IDCT  DXVA2_ModeWMV9_IDCT  DXVA2_ModeH264_VLD_NoFGT 
       Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
           D3D9 Overlay: Supported
                DXVA-HD: Supported
           DDraw Status: Enabled
             D3D Status: Enabled
             AGP Status: Enabled
    Sound Devices
                Description: Speakers (High Definition Audio Device)
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: HDAUDIO\FUNC_01&VEN_8384&DEV_76A0&SUBSYS_102801F2&REV_1002
            Manufacturer ID: 1
                 Product ID: 65535
                       Type: WDM
                Driver Name: HdAudio.sys
             Driver Version: 6.02.9200.16496 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 1/8/2013 23:57:47, 277504 bytes
                Other Files:
            Driver Provider: Microsoft
             HW Accel Level: Basic
                  Cap Flags: 0xF1F
        Min/Max Sample Rate: 100, 200000
    Static/Strm HW Mix Bufs: 1, 0
    Static/Strm HW 3D Bufs: 0, 0
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: No, No
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                Description: Digital Audio (S/PDIF) (High Definition Audio Device)
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: HDAUDIO\FUNC_01&VEN_8384&DEV_76A0&SUBSYS_102801F2&REV_1002
            Manufacturer ID: 1
                 Product ID: 65535
                       Type: WDM
                Driver Name: HdAudio.sys
             Driver Version: 6.02.9200.16496 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 1/8/2013 23:57:47, 277504 bytes
                Other Files:
            Driver Provider: Microsoft
             HW Accel Level: Basic
                  Cap Flags: 0xF1F
        Min/Max Sample Rate: 100, 200000
    Static/Strm HW Mix Bufs: 1, 0
    Static/Strm HW 3D Bufs: 0, 0
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: No, No
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
    Sound Capture Devices
                Description: Microphone (High Definition Audio Device)
      Default Sound Capture: Yes
      Default Voice Capture: Yes
                Driver Name: HdAudio.sys
             Driver Version: 6.02.9200.16496 (English)
          Driver Attributes: Final Retail
              Date and Size: 1/8/2013 23:57:47, 277504 bytes
                  Cap Flags: 0x1
               Format Flags: 0xFFFFF
    DirectInput Devices
          Device Name: Mouse
             Attached: 1
        Controller ID: n/a
    Vendor/Product ID: n/a
            FF Driver: n/a
          Device Name: Keyboard
             Attached: 1
        Controller ID: n/a
    Vendor/Product ID: n/a
            FF Driver: n/a
          Device Name: Microsoft Hardware USB Wireless Mouse
             Attached: 1
        Controller ID: 0x0
    Vendor/Product ID: 0x045E, 0x00E1
            FF Driver: n/a
    Poll w/ Interrupt: No
    USB Devices
    + USB Root Hub
    | Vendor/Product ID: 0x8086, 0x2832
    | Matching Device ID: USB\ROOT_HUB
    | Service: usbhub
    | Driver: usbhub.sys, 2/2/2013 05:00:12, 332520 bytes
    | Driver: usbd.sys, 9/20/2012 02:34:12, 18664 bytes
    Gameport Devices
    PS/2 Devices
    + HID Keyboard Device
    | Vendor/Product ID: 0x0A5C, 0x4502
    | Matching Device ID: HID_DEVICE_SYSTEM_KEYBOARD
    | Service: kbdhid
    | Driver: kbdhid.sys, 7/25/2012 22:36:28, 23040 bytes
    | Driver: kbdclass.sys, 7/25/2012 23:42:33, 39664 bytes
    |
    + Standard PS/2 Keyboard
    | Matching Device ID: *PNP0303
    | Service: i8042prt
    | Driver: i8042prt.sys, 7/25/2012 22:36:23, 89600 bytes
    | Driver: kbdclass.sys, 7/25/2012 23:42:33, 39664 bytes
    |
    + PS/2 Compatible Mouse
    | Matching Device ID: *PNP0F13
    | Service: i8042prt
    | Driver: i8042prt.sys, 7/25/2012 22:36:23, 89600 bytes
    | Driver: mouclass.sys, 7/25/2012 23:42:15, 39152 bytes
    |
    + HID-compliant mouse
    | Vendor/Product ID: 0x0A5C, 0x4503
    | Matching Device ID: HID_DEVICE_SYSTEM_MOUSE
    | Service: mouhid
    | Driver: mouhid.sys, 7/25/2012 22:36:28, 20992 bytes
    | Driver: mouclass.sys, 7/25/2012 23:42:15, 39152 bytes
    |
    + Microsoft USB Wireless Mouse (Mouse and Keyboard Center)
    | Vendor/Product ID: 0x045E, 0x00E1
    | Matching Device ID: HID\VID_045E&PID_00E1&Col02
    | Upper Filters: Point32
    | Service: mouhid
    | Driver: point32.sys, 1/29/2013 18:13:14, 44144 bytes
    | Driver: mouhid.sys, 7/25/2012 22:36:28, 20992 bytes
    | Driver: mouclass.sys, 7/25/2012 23:42:15, 39152 bytes
    | Driver: WdfCoInstaller01011.dll, 9/28/2012 22:52:10, 1629040 bytes
    Disk & DVD/CD-ROM Drives
          Drive: C:
    Free Space: 63.3 GB
    Total Space: 225.6 GB
    File System: NTFS
          Model: WDC WD2500BEVS-75UST0
          Drive: D:
    Free Space: 5.7 GB
    Total Space: 10.2 GB
    File System: NTFS
          Model: WDC WD2500BEVS-75UST0
          Drive: E:
          Model: MATSHITA DVDRWBD UJ-110 ATA Device
         Driver: c:\windows\system32\drivers\cdrom.sys, 6.02.9200.16384 (English), 7/25/2012 22:33:53, 135680 bytes
    System Devices
         Name: Mobile Intel(R) PM965/GM965/GL960/GS965 Express Processor to DRAM Controller - 2A00
    Device ID: PCI\VEN_8086&DEV_2A00&SUBSYS_01F21028&REV_0C\3&18D45AA6&0&00
       Driver: n/a
         Name: Ricoh 1394 OHCI Compliant Host Controller
    Device ID: PCI\VEN_1180&DEV_0832&SUBSYS_01F21028&REV_05\4&1237F73F&0&08F0
       Driver: C:\WINDOWS\system32\DRIVERS\1394ohci.sys, 6.02.9200.16384 (English), 7/25/2012 22:33:52, 173056 bytes
         Name: Dell Wireless 1395 WLAN Mini-Card
    Device ID: PCI\VEN_14E4&DEV_4315&SUBSYS_000B1028&REV_01\4&BA17ADC&0&00E1
       Driver: C:\WINDOWS\system32\DRIVERS\BCMWL63.SYS, 5.100.0245.0020 (English), 6/2/2012 10:31:32, 4704256 bytes
       Driver: C:\WINDOWS\system32\drivers\vwifibus.sys, 6.02.9200.16384 (English), 7/25/2012 22:35:21, 18944 bytes
         Name: Intel(R) ICH8M LPC Interface Controller - 2815
    Device ID: PCI\VEN_8086&DEV_2815&SUBSYS_01F21028&REV_02\3&18D45AA6&0&F8
       Driver: C:\WINDOWS\system32\DRIVERS\msisadrv.sys, 6.02.9200.16384 (English), 7/25/2012 23:42:14, 15088 bytes
         Name: Base System Device
    Device ID: PCI\VEN_1180&DEV_0592&SUBSYS_01F21028&REV_12\4&1237F73F&0&0BF0
       Driver: n/a
         Name: Intel(R) ICH8 Family USB Universal Host Controller - 2832
    Device ID: PCI\VEN_8086&DEV_2832&SUBSYS_01F21028&REV_02\3&18D45AA6&0&EA
       Driver: C:\WINDOWS\system32\drivers\usbuhci.sys, 6.02.9200.16420 (English), 9/20/2012 01:30:39, 24576 bytes
       Driver: C:\WINDOWS\system32\drivers\usbport.sys, 6.02.9200.16420 (English), 9/20/2012 02:34:12, 379624 bytes
       Driver: C:\WINDOWS\system32\drivers\usbhub.sys, 6.02.9200.16518 (English), 2/2/2013 05:00:12, 332520 bytes
         Name: Standard SATA AHCI Controller
    Device ID: PCI\VEN_8086&DEV_2829&SUBSYS_01F21028&REV_02\3&18D45AA6&0&FA
       Driver: C:\WINDOWS\system32\DRIVERS\storahci.sys, 6.02.9200.16384 (English), 7/25/2012 23:42:18, 66288 bytes
         Name: Intel(R) ICH8 Family SMBus Controller - 283E
    Device ID: PCI\VEN_8086&DEV_283E&SUBSYS_01F21028&REV_02\3&18D45AA6&0&FB
       Driver: n/a
         Name: Intel(R) ICH8 Family USB Universal Host Controller - 2835
    Device ID: PCI\VEN_8086&DEV_2835&SUBSYS_01F21028&REV_02\3&18D45AA6&0&D1
       Driver: C:\WINDOWS\system32\drivers\usbuhci.sys, 6.02.9200.16420 (English), 9/20/2012 01:30:39, 24576 bytes
       Driver: C:\WINDOWS\system32\drivers\usbport.sys, 6.02.9200.16420 (English), 9/20/2012 02:34:12, 379624 bytes
       Driver: C:\WINDOWS\system32\drivers\usbhub.sys, 6.02.9200.16518 (English), 2/2/2013 05:00:12, 332520 bytes
         Name: Intel(R) 82801 PCI Bridge - 2448
    Device ID: PCI\VEN_8086&DEV_2448&SUBSYS_01F21028&REV_F2\3&18D45AA6&0&F0
       Driver: C:\WINDOWS\system32\DRIVERS\pci.sys, 6.02.9200.16384 (English), 7/25/2012 23:42:15, 191216 bytes
         Name: NVIDIA GeForce 8600M GT (Microsoft Corporation - WDDM v1.2)                                
    Device ID: PCI\VEN_10DE&DEV_0407&SUBSYS_01F21028&REV_A1\4&21A7BA7D&0&0008
       Driver: C:\WINDOWS\system32\DRIVERS\nvlddmkm.sys, 9.18.0013.0286 (English), 6/27/2012 22:06:16, 10900840 bytes
       Driver: C:\WINDOWS\system32\nvd3dum.dll, 9.18.0013.0286 (English), 6/27/2012 22:06:16, 15385960 bytes
       Driver: C:\WINDOWS\system32\nvwgf2um.dll, 9.18.0013.0286 (English), 6/27/2012 22:06:16, 12170600 bytes
         Name: Mobile Intel(R) PM965/GM965/GL960/GS965 Express PCI Express Root Port - 2A01
    Device ID: PCI\VEN_8086&DEV_2A01&SUBSYS_01F21028&REV_0C\3&18D45AA6&0&08
       Driver: C:\WINDOWS\system32\DRIVERS\pci.sys, 6.02.9200.16384 (English), 7/25/2012 23:42:15, 191216 bytes
         Name: Intel(R) ICH8 Family PCI Express Root Port 2 - 2841
    Device ID: PCI\VEN_8086&DEV_2841&SUBSYS_01F21028&REV_02\3&18D45AA6&0&E1
       Driver: C:\WINDOWS\system32\DRIVERS\pci.sys, 6.02.9200.16384 (English), 7/25/2012 23:42:15, 191216 bytes
         Name: Intel(R) ICH8 Family USB Universal Host Controller - 2830
    Device ID: PCI\VEN_8086&DEV_2830&SUBSYS_01F21028&REV_02\3&18D45AA6&0&E8
       Driver: C:\WINDOWS\system32\drivers\usbuhci.sys, 6.02.9200.16420 (English), 9/20/2012 01:30:39, 24576 bytes
       Driver: C:\WINDOWS\system32\drivers\usbport.sys, 6.02.9200.16420 (English), 9/20/2012 02:34:12, 379624 bytes
       Driver: C:\WINDOWS\system32\drivers\usbhub.sys, 6.02.9200.16518 (English), 2/2/2013 05:00:12, 332520 bytes
         Name: Intel(R) ICH8 Family PCI Express Root Port 1 - 283F
    Device ID: PCI\VEN_8086&DEV_283F&SUBSYS_01F21028&REV_02\3&18D45AA6&0&E0
       Driver: C:\WINDOWS\system32\DRIVERS\pci.sys, 6.02.9200.16384 (English), 7/25/2012 23:42:15, 191216 bytes
         Name: Intel(R) ICH8M Ultra ATA Storage Controllers - 2850
    Device ID: PCI\VEN_8086&DEV_2850&SUBSYS_01F21028&REV_02\3&18D45AA6&0&F9
       Driver: C:\WINDOWS\system32\DRIVERS\intelide.sys, 6.02.9200.16384 (English), 7/25/2012 23:42:33, 16624 bytes
       Driver: C:\WINDOWS\system32\DRIVERS\pciidex.sys, 6.02.9200.16384 (English), 7/25/2012 23:42:15, 41200 bytes
       Driver: C:\WINDOWS\system32\DRIVERS\atapi.sys, 6.02.9200.16384 (English), 7/25/2012 23:42:31, 22768 bytes
       Driver: C:\WINDOWS\system32\DRIVERS\ataport.sys, 6.02.9200.16384 (English), 7/25/2012 23:42:31, 158448 bytes
         Name: Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836
    Device ID: PCI\VEN_8086&DEV_2836&SUBSYS_01F21028&REV_02\3&18D45AA6&0&EF
       Driver: C:\WINDOWS\system32\drivers\usbehci.sys, 6.02.9200.16420 (English), 9/20/2012 02:34:12, 64232 bytes
       Driver: C:\WINDOWS\system32\drivers\usbport.sys, 6.02.9200.16420 (English), 9/20/2012 02:34:12, 379624 bytes
       Driver: C:\WINDOWS\system32\drivers\usbhub.sys, 6.02.9200.16518 (English), 2/2/2013 05:00:12, 332520 bytes
         Name: High Definition Audio Controller
    Device ID: PCI\VEN_8086&DEV_284B&SUBSYS_01F21028&REV_02\3&18D45AA6&0&D8
       Driver: C:\WINDOWS\system32\DRIVERS\hdaudbus.sys, 6.02.9200.16420 (English), 9/20/2012 01:29:43, 62464 bytes
         Name: Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A
    Device ID: PCI\VEN_8086&DEV_283A&SUBSYS_01F21028&REV_02\3&18D45AA6&0&D7
       Driver: C:\WINDOWS\system32\drivers\usbehci.sys, 6.02.9200.16420 (English), 9/20/2012 02:34:12, 64232 bytes
       Driver: C:\WINDOWS\system32\drivers\usbport.sys, 6.02.9200.16420 (English), 9/20/2012 02:34:12, 379624 bytes
       Driver: C:\WINDOWS\system32\drivers\usbhub.sys, 6.02.9200.16518 (English), 2/2/2013 05:00:12, 332520 bytes
         Name: SDA Standard Compliant SD Host Controller
    Device ID: PCI\VEN_1180&DEV_0822&SUBSYS_01F21028&REV_22\4&1237F73F&0&09F0
       Driver: C:\WINDOWS\system32\DRIVERS\sdbus.sys, 6.02.9200.16496 (English), 1/9/2013 20:02:20, 158952 bytes
       Driver: C:\WINDOWS\system32\DRIVERS\dumpsd.sys, 6.02.9200.16496 (English), 1/9/2013 20:02:15, 104168 bytes
         Name: Intel(R) ICH8 Family USB Universal Host Controller - 2831
    Device ID: PCI\VEN_8086&DEV_2831&SUBSYS_01F21028&REV_02\3&18D45AA6&0&E9
       Driver: C:\WINDOWS\system32\drivers\usbuhci.sys, 6.02.9200.16420 (English), 9/20/2012 01:30:39, 24576 bytes
       Driver: C:\WINDOWS\system32\drivers\usbport.sys, 6.02.9200.16420 (English), 9/20/2012 02:34:12, 379624 bytes
       Driver: C:\WINDOWS\system32\drivers\usbhub.sys, 6.02.9200.16518 (English), 2/2/2013 05:00:12, 332520 bytes
         Name: Broadcom 440x 10/100 Integrated Controller
    Device ID: PCI\VEN_14E4&DEV_170C&SUBSYS_01F21028&REV_02\4&1237F73F&0&00F0
       Driver: C:\WINDOWS\system32\DRIVERS\bcm4sbxp.sys, 4.60.0000.0000 (English), 7/25/2012 18:49:36, 46080 bytes
         Name: Intel(R) ICH8 Family PCI Express Root Port 4 - 2845
    Device ID: PCI\VEN_8086&DEV_2845&SUBSYS_01F21028&REV_02\3&18D45AA6&0&E3
       Driver: C:\WINDOWS\system32\DRIVERS\pci.sys, 6.02.9200.16384 (English), 7/25/2012 23:42:15, 191216 bytes
         Name: Base System Device
    Device ID: PCI\VEN_1180&DEV_0843&SUBSYS_01F21028&REV_12\4&1237F73F&0&0AF0
       Driver: n/a
         Name: Ricoh xD-Picture Card Controller
    Device ID: PCI\VEN_1180&DEV_0852&SUBSYS_01F21028&REV_12\4&1237F73F&0&0CF0
       Driver: C:\WINDOWS\system32\DRIVERS\rixdptsk.sys, 6.00.0001.0000 (Japanese), 11/14/2006 18:35:20, 37376 bytes
       Driver: C:\WINDOWS\system32\rixdicon.dll, 5/6/2005 20:06:00, 16480 bytes
         Name: Intel(R) ICH8 Family USB Universal Host Controller - 2834
    Device ID: PCI\VEN_8086&DEV_2834&SUBSYS_01F21028&REV_02\3&18D45AA6&0&D0
       Driver: C:\WINDOWS\system32\drivers\usbuhci.sys, 6.02.9200.16420 (English), 9/20/2012 01:30:39, 24576 bytes
       Driver: C:\WINDOWS\system32\drivers\usbport.sys, 6.02.9200.16420 (English), 9/20/2012 02:34:12, 379624 bytes
       Driver: C:\WINDOWS\system32\drivers\usbhub.sys, 6.02.9200.16518 (English), 2/2/2013 05:00:12, 332520 bytes
    DirectShow Filters
    DirectShow Filters:
    WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.02.9200.16384
    WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.02.9200.16384
    WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.02.9200.16384
    MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.02.9200.16384
    Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.02.9200.16496
    WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.02.9200.16384
    WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.02.9200.16384
    Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.02.9200.16384
    Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.02.9200.16384
    WMT MuxDeMux Filter,0x00200000,0,0,WMM2FILT.dll,2.06.4037.0000
    WMT VIH2 Fix,0x00200000,1,1,WLXVAFilt.dll,16.04.3505.0912
    Record Queue,0x00200000,1,1,WLXVAFilt.dll,16.04.3505.0912
    WMT Switch Filter,0x00200000,1,1,WLXVAFilt.dll,16.04.3505.0912
    WMT Virtual Renderer,0x00200000,1,0,WLXVAFilt.dll,16.04.3505.0912
    WMT DV Extract,0x00200000,1,1,WLXVAFilt.dll,16.04.3505.0912
    WMT Virtual Source,0x00200000,0,1,WLXVAFilt.dll,16.04.3505.0912
    WMT Sample Information Filter,0x00200000,1,1,WLXVAFilt.dll,16.04.3505.0912
    DV Muxer,0x00400000,0,0,qdv.dll,6.06.9200.16384
    Color Space Converter,0x00400001,1,1,quartz.dll,6.06.9200.16384
    WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.9200.16384
    AVI Splitter,0x00600000,1,1,quartz.dll,6.06.9200.16384
    WMT AudioAnalyzer,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.9200.16384
    SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.9200.16384
    Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,12.00.9200.16429
    AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.9200.16384
    WMT Format Conversion,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.9200.16384
    WMT Black Frame Generator,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.9200.16384
    WMT Screen Capture filter,0x00200000,0,1,WMM2FILT.dll,2.06.4037.0000
    MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.9200.16384
    SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.9200.16384
    VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.9200.16384
    MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.9200.16384
    Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.9200.16384
    SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.9200.16384
    Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,12.00.9200.16384
    Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.9200.16384
    MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.9200.16384
    WMT Import Filter,0x00200000,0,1,WMM2FILT.dll,2.06.4037.0000
    DV Splitter,0x00600000,1,2,qdv.dll,6.06.9200.16384
    Bitmap Generate,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.9200.16384
    WMT VIH2 Fix,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    Record Queue,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    WMT Audio Mixer,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,12.00.9200.16384
    ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.9200.16384
    Video Renderer,0x00800001,1,0,quartz.dll,6.06.9200.16384
    Frame Eater,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.9200.16384
    Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.9200.16384
    Video Port Manager,0x00600000,2,1,quartz.dll,6.06.9200.16384
    Video Renderer,0x00400000,1,0,quartz.dll,6.06.9200.16384
    File Writer,0x00200000,1,0,WLXVAFilt.dll,16.04.3505.0912
    VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.9200.16384
    WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.9200.16384
    WMT Sample Information Filter,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.02.9200.16384
    File writer,0x00200000,1,0,qcap.dll,6.06.9200.16384
    WMT Log Filter,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    WMT Virtual Renderer,0x00200000,1,0,WMM2FILT.dll,2.06.4037.0000
    DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.9200.16384
    Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.9200.16384
    AVI Draw,0x00600064,9,1,quartz.dll,6.06.9200.16384
    Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,12.00.9200.16384
    WST Pager,0x00200000,1,1,WSTPager.ax,6.06.9200.16384
    WMT DirectX Transform Wrapper,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.9200.16384
    DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.9200.16384
    9x8Resize,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    Allocator Fix,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    SampleGrabber,0x00200000,1,1,qedit.dll,6.06.9200.16384
    Null Renderer,0x00200000,1,0,qedit.dll,6.06.9200.16384
    WMT Virtual Source,0x00200000,0,1,WMM2FILT.dll,2.06.4037.0000
    MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.9200.16384
    Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.02.9200.16384
    WMT Interlacer,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.9200.16384
    Smart Tee,0x00200000,1,2,qcap.dll,6.06.9200.16384
    Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.9200.16384
    AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.9200.16384
    Uncompressed Domain Shot Detection Filter,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.9200.16384
    Wave Parser,0x00400000,1,1,quartz.dll,6.06.9200.16384
    MIDI Parser,0x00400000,1,1,quartz.dll,6.06.9200.16384
    Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.9200.16384
    File stream renderer,0x00400000,1,1,quartz.dll,6.06.9200.16384
    Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,12.00.8506.0000
    StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.9200.16384
    AVI Mux,0x00200000,1,0,qcap.dll,6.06.9200.16384
    Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.9200.16384
    File Source (Async.),0x00400000,0,1,quartz.dll,6.06.9200.16384
    File Source (URL),0x00400000,0,1,quartz.dll,6.06.9200.16384
    WMT DV Extract,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    AudioRecorder WAV Dest,0x00200000,0,0,WavDest.dll,
    AudioRecorder Wave Form,0x00200000,0,0,WavDest.dll,
    SoundRecorder Null Renderer,0x00200000,0,0,WavDest.dll,
    WMT Switch Filter,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    WMT Volume,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    Stretch Video,0x00200000,1,1,WMM2FILT.dll,2.06.4037.0000
    Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.9200.16384
    Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.02.9200.16384
    BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.9200.16384
    MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.9200.16384
    WDM Streaming Tee/Splitter Devices:
    Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.02.9200.16384
    Video Compressors:
    WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.02.9200.16384
    WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.02.9200.16384
    MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.02.9200.16384
    DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.9200.16384
    MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.9200.16384
    Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.9200.16384
    Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.9200.16384
    Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.9200.16384
    Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.9200.16384
    Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.9200.16384
    Audio Compressors:
    WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.02.9200.16384
    WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.02.9200.16384
    IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.9200.16384
    PCM,0x00200000,1,1,quartz.dll,6.06.9200.16384
    Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.9200.16384
    GSM 6.10,0x00200000,1,1,quartz.dll,6.06.9200.16384
    CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.9200.16384
    CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.9200.16384
    MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.9200.16384
    Audio Capture Sources:
    Microphone (High Definition Audio Device),0x00200000,0,0,qcap.dll,6.06.9200.16384
    PBDA CP Filters:
    PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.9200.16384
    PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.9200.16384
    PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.9200.16384
    Midi Renderers:
    Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.9200.16384
    Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.9200.16384
    WDM Streaming Capture Devices:
    Laptop Integrated Webcam,0x00200000,0,1,ksproxy.ax,6.02.9200.16384
    HD Audio Microphone,0x00200000,1,1,ksproxy.ax,6.02.9200.16384
    WDM Streaming Rendering Devices:
    HD Audio Headphone/Speakers,0x00200000,1,1,ksproxy.ax,6.02.9200.16384
    HD Audio SPDIF out,0x00200000,1,1,ksproxy.ax,6.02.9200.16384
    BDA Network Providers:
    Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.9200.16384
    Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.9200.16384
    Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.9200.16384
    Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.9200.16384
    Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.9200.16384
    Video Capture Sources:
    Laptop Integrated Webcam,0x00200000,0,1,ksproxy.ax,6.02.9200.16384
    Multi-Instance Capable VBI Codecs:
    VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.9200.16384
    BDA Transport Information Renderers:
    BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.9200.16384
    MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.9200.16384
    BDA CP/CA Filters:
    Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.9200.16384
    Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.9200.16384
    PTFilter,0x00200000,0,0,EncDec.dll,6.06.9200.16384
    XDS Codec,0x00200000,0,0,EncDec.dll,6.06.9200.16384
    WDM Streaming Communication Transforms:
    Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.02.9200.16384
    Audio Renderers:
    Speakers (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.9200.16384
    Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.9200.16384
    Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.9200.16384
    DirectSound: Digital Audio (S/PDIF) (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.9200.16384
    DirectSound: Speakers (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.9200.16384
    Digital Audio (S/PDIF) (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.9200.16384
    Preferred DirectShow Filters
    [HKEY_LOCAL_MACHINE\Software\Microsoft\DirectShow\Preferred]
    <media subtype GUID>, [<filter friendly name>, ]<filter CLSID>
    MEDIASUBTYPE_WMAUDIO_LOSSLESS, WMAudio Decoder DMO, CLSID_CWMADecMediaObject
    MEDIASUBTYPE_MPG4, Mpeg4 Decoder DMO, CLSID_CMpeg4DecMediaObject
    MEDIASUBTYPE_WVC1, WMVideo Decoder DMO, CLSID_CWMVDecMediaObject
    WMMEDIASUBTYPE_WMSP2, WMSpeech Decoder DMO, CLSID_CWMSPDecMediaObject
    {64687664-0000-0010-8000-00AA00389B71}, DV Video Decoder, CLSID_DVVideoCodec
    MEDIASUBTYPE_h264, Microsoft DTV-DVD Video Decoder, CLSID_CMPEG2VidDecoderDS
    MEDIASUBTYPE_MPEG1AudioPayload, MPEG Audio Decoder, CLSID_CMpegAudioCodec
    {78766964-0000-0010-8000-00AA00389B71}, Mpeg4s Decoder DMO, CLSID_CMpeg4sDecMediaObject
    MEDIASUBTYPE_WMAUDIO3, WMAudio Decoder DMO, CLSID_CWMADecMediaObject
    MEDIASUBTYPE_WMV2, WMVideo Decoder DMO, CLSID_CWMVDecMediaObject
    MEDIASUBTYPE_MPEG2_AUDIO, Microsoft DTV-DVD Audio Decoder, CLSID_CMPEG2AudDecoderDS
    {64697678-0000-0010-8000-00AA00389B71}, Mpeg4s Decoder DMO, CLSID_CMpeg4sDecMediaObject
    WMMEDIASUBTYPE_MP3, MP3 Decoder DMO, CLSID_CMP3DecMediaObject
    MEDIASUBTYPE_mp42, Mpeg4 Decoder DMO, CLSID_CMpeg4DecMediaObject
    MEDIASUBTYPE_MSS1, WMV Screen decoder DMO, CLSID_CMSSCDecMediaObject
    MEDIASUBTYPE_WVP2, WMVideo Decoder DMO, CLSID_CWMVDecMediaObject
    MEDIASUBTYPE_WMV1, WMVideo Decoder DMO, CLSID_CWMVDecMediaObject
    MEDIASUBTYPE_WMVP, WMVideo Decoder DMO, CLSID_CWMVDecMediaObject
    MEDIASUBTYPE_WMV3, WMVideo Decoder DMO, CLSID_CWMVDecMediaObject
    MEDIASUBTYPE_WMVR, WMVideo Decoder DMO, CLSID_CWMVDecMediaObject
    MEDIASUBTYPE_MJPG, MJPEG Decompressor, CLSID_MjpegDec
    MEDIASUBTYPE_mp43, Mpeg43 Decoder DMO, CLSID_CMpeg43DecMediaObject
    MEDIASUBTYPE_MSS2, WMV Screen decoder DMO, CLSID_CMSSCDecMediaObject
    {64737664-0000-0010-8000-00AA00389B71}, DV Video Decoder, CLSID_DVVideoCodec
    WMMEDIASUBTYPE_WMAudioV8, WMAudio Decoder DMO, CLSID_CWMADecMediaObject
    {44495658-0000-0010-8000-00AA00389B71}, Mpeg4s Decoder DMO, CLSID_CMpeg4sDecMediaObject
    WMMEDIASUBTYPE_WMSP1, WMSpeech Decoder DMO, CLSID_CWMSPDecMediaObject
    MEDIASUBTYPE_RAW_AAC1, Microsoft DTV-DVD Audio Decoder, CLSID_CMPEG2AudDecoderDS
    MEDIASUBTYPE_MP43, Mpeg43 Decoder DMO, CLSID_CMpeg43DecMediaObject
    {6C737664-0000-0010-8000-00AA00389B71}, DV Video Decoder, CLSID_DVVideoCodec
    MEDIASUBTYPE_AVC1, Microsoft DTV-DVD Video Decoder, CLSID_CMPEG2VidDecoderDS
    MEDIASUBTYPE_MPEG1Payload, MPEG Video Decoder, CLSID_CMpegVideoCodec
    {20637664-0000-0010-8000-00AA00389B71}, DV Video Decoder, CLSID_DVVideoCodec
    MEDIASUBTYPE_MPEG_ADTS_AAC, Microsoft DTV-DVD Audio Decoder, CLSID_CMPEG2AudDecoderDS
    MEDIASUBTYPE_MP42, Mpeg4 Decoder DMO, CLSID_CMpeg4DecMediaObject
    {58564944-0000-0010-8000-00AA00389B71}, Mpeg4s Decoder DMO, CLSID_CMpeg4sDecMediaObject
    MEDIASUBTYPE_mpg4, Mpeg4 Decoder DMO, CLSID_CMpeg4DecMediaObject
    MEDIASUBTYPE_m4s2, Mpeg4s Decoder DMO, CLSID_CMpeg4sDecMediaObject
    MEDIASUBTYPE_MP4S, Mpeg4s Decoder DMO, CLSID_CMpeg4sDecMediaObject
    MEDIASUBTYPE_M4S2, Mpeg4s Decoder DMO, CLSID_CMpeg4sDecMediaObject
    MEDIASUBTYPE_mp4s, Mpeg4s Decoder DMO, CLSID_CMpeg4sDecMediaObject
    MEDIASUBTYPE_MPEG1Packet, MPEG Video Decoder, CLSID_CMpegVideoCodec
    {5634504D-0000-0010-8000-00AA00389B71}, Mpeg4s Decoder DMO, CLSID_CMpeg4sDecMediaObject
    MEDIASUBTYPE_H264, Microsoft DTV-DVD Video Decoder, CLSID_CMPEG2VidDecoderDS
    {7634706D-0000-0010-8000-00AA00389B71}, Mpeg4s Decoder DMO, CLSID_CMpeg4sDecMediaObject
    MEDIASUBTYPE_MPEG2_VIDEO, Microsoft DTV-DVD Video Decoder, CLSID_CMPEG2VidDecoderDS
    MEDIASUBTYPE_WMVA, WMVideo Decoder DMO, CLSID_CWMVDecMediaObject
    MEDIASUBTYPE_MSAUDIO1, WMAudio Decoder DMO, CLSID_CWMADecMediaObject
    MEDIASUBTYPE_MPEG_LOAS, Microsoft DTV-DVD Audio Decoder, CLSID_CMPEG2AudDecoderDS
    MEDIASUBTYPE_DVD_LPCM_AUDIO, Microsoft DTV-DVD Audio Decoder, CLSID_CMPEG2AudDecoderDS
    Media Foundation Transforms
    [HKEY_LOCAL_MACHINE\Software\Classes\MediaFoundation\Transforms]
    <category>:
      <transform friendly name>, <transform CLSID>, <flags>, [<merit>, ]<file name>, <file version>
    Video Decoders:
      Microsoft MPEG Video Decoder MFT, {2D709E52-123F-49B5-9CBC-9AF5CDE28FB9}, 0x1, msmpeg2vdec.dll, 12.00.9200.16429
      DV Decoder MFT, {404A6DE5-D4D6-4260-9BC7-5A6CBD882432}, 0x1, mfdvdec.dll, 6.02.9200.16384
      Mpeg4s Decoder MFT, CLSID_CMpeg4sDecMFT, 0x1, mp4sdecd.dll, 6.02.9200.16496
      Microsoft H264 Video Decoder MFT, CLSID_CMSH264DecoderMFT, 0x1, msmpeg2vdec.dll, 12.00.9200.16429
      WMV Screen decoder MFT, CLSID_CMSSCDecMediaObject, 0x1, wmvsdecd.dll, 6.02.9200.16384
      WMVideo Decoder MFT, CLSID_CWMVDecMediaObject, 0x1, wmvdecod.dll, 6.02.9200.16384
      MJPEG Decoder MFT, {CB17E772-E1CC-4633-8450-5617AF577905}, 0x1, mfmjpegdec.dll, 6.02.9200.16384
      Mpeg43 Decoder MFT, CLSID_CMpeg43DecMediaObject, 0x1, mp43decd.dll, 6.02.9200.16384
      Mpeg4 Decoder MFT, CLSID_CMpeg4DecMediaObject, 0x1, mpg4decd.dll, 6.02.9200.16384
    Video Encoders:
      H264 Encoder MFT, {6CA50344-051A-4DED-9779-A43305165E35}, 0x1, mfh264enc.dll, 6.02.9200.16420
      WMVideo8 Encoder MFT, CLSID_CWMVXEncMediaObject, 0x1, wmvxencd.dll, 6.02.9200.16384
      WMVideo9 Encoder MFT, CLSID_CWMV9EncMediaObject, 0x1, wmvencod.dll, 6.02.9200.16384
      Microsoft MPEG-2 Video Encoder MFT, {E6335F02-80B7-4DC4-ADFA-DFE7210D20D5}, 0x2, msmpeg2enc.dll, 12.00.9200.16384
    Video Effects:
      Frame Rate Converter, CLSID_CFrameRateConvertDmo, 0x1, mfvdsp.dll, 6.02.9200.16384
      Resizer MFT, CLSID_CResizerDMO, 0x1, vidreszr.dll, 6.02.9200.16384
      VideoStabilization MFT, {51571744-7FE4-4FF2-A498-2DC34FF74F1B}, 0x1, MSVideoDSP.dll, 6.02.9200.16384
      Color Control, CLSID_CColorControlDmo, 0x1, mfvdsp.dll, 6.02.9200.16384
      Color Converter MFT, CLSID_CColorConvertDMO, 0x1, colorcnv.dll, 6.02.9200.16384
    Video Processor:
      Microsoft Video Processor MFT, {88753B26-5B24-49BD-B2E7-0C445C78C982}, 0x1, msvproc.dll, 12.00.9200.16420
    Audio Decoders:
      Microsoft Dolby Digital Plus Decoder MFT, {177C0AFE-900B-48D4-9E4C-57ADD250B3D4}, 0x1, MSAudDecMFT.dll, 6.02.9200.16384
      WMAudio Decoder MFT, CLSID_CWMADecMediaObject, 0x1, WMADMOD.DLL, 6.02.9200.16384
      Microsoft AAC Audio Decoder MFT, CLSID_CMSAACDecMFT, 0x1, MSAudDecMFT.dll, 6.02.9200.16384
      GSM ACM Wrapper MFT, {4A76B469-7B66-4DD4-BA2D-DDF244C766DC}, 0x1, mfcore.dll, 12.00.9200.16451
      WMAPro over S/PDIF MFT, CLSID_CWMAudioSpdTxDMO, 0x1, WMADMOD.DLL, 6.02.9200.16384
      Microsoft MPEG Audio Decoder MFT, {70707B39-B2CA-4015-ABEA-F8447D22D88B}, 0x1, MSAudDecMFT.dll, 6.02.9200.16384
      WMSpeech Decoder DMO, CLSID_CWMSPDecMediaObject, 0x1, WMSPDMOD.DLL, 6.02.9200.16384
      G711 Wrapper MFT, {92B66080-5E2D-449E-90C4-C41F268E5514}, 0x1, mfcore.dll, 12.00.9200.16451
      IMA ADPCM ACM Wrapper MFT, {A16E1BFF-A80D-48AD-AECD-A35C005685FE}, 0x1, mfcore.dll, 12.00.9200.16451
      MP3 Decoder MFT, CLSID_CMP3DecMediaObject, 0x1, mp3dmod.dll, 6.02.9200.16384
      ADPCM ACM Wrapper MFT, {CA34FE0A-5722-43AD-AF23-05F7650257DD}, 0x1, mfcore.dll, 12.00.9200.16451
    Audio Encoders:
      MP3 Encoder ACM Wrapper MFT, {11103421-354C-4CCA-A7A3-1AFF9A5B6701}, 0x1, mfcore.dll, 12.00.9200.16451
      WM Speech Encoder DMO, CLSID_CWMSPEncMediaObject2, 0x1, WMSPDMOE.DLL, 6.02.9200.16384
      Microsoft MPEG-2 Audio Encoder MFT, {46A4DD5C-73F8-4304-94DF-308F760974F4}, 0x1, msmpeg2enc.dll, 12.00.9200.16384
      WMAudio Encoder MFT, CLSID_CWMAEncMediaObject, 0x1, WMADMOE.DLL, 6.02.9200.16384
      Microsoft AAC Audio Encoder MFT, {93AF0C51-2275-45D2-A35B-F2BA21CAED00}, 0x1, mfAACEnc.dll, 6.02.9200.16384
      Microsoft Dolby Digital Encoder MFT, {AC3315C9-F481-45D7-826C-0B406C1F64B8}, 0x1, msac3enc.dll, 6.02.9200.16384
    Audio Effects:
      AEC, CLSID_CWMAudioAEC, 0x1, mfwmaaec.dll, 6.02.9200.16384
      Resampler MFT, CLSID_CResamplerMediaObject, 0x1, resampledmo.dll, 6.02.9200.16384
    Multiplexers:
      Microsoft MPEG2 Multiplexer MFT, {AB300F71-01AB-46D2-AB6C-64906CB03258}, 0x2, mfmpeg2srcsnk.dll, 12.00.9200.16437
    Others:
      Microsoft H264 Video Remux (MPEG2TSToMP4) MFT, {05A47EBB-8BF0-4CBF-AD2F-3B71D75866F5}, 0x1, msmpeg2vdec.dll, 12.00.9200.16429
    Media Foundation Enabled Hardware Categories
    [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows Media Foundation\HardwareMFT]
    EnableDecoders = 0
    EnableEncoders = 1
    EnableVideoProcessors = 1
    Media Foundation Byte Stream Handlers
    [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows Media Foundation\ByteStreamHandlers]
    [HKEY_LOCAL_MACHINE\Software\Classes\MediaFoundation\MediaSources\Preferred]
    <file ext. or MIME type>, <handler CLSID>, <brief description>[, Preferred]
    .3g2, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    .3gp, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    .3gp2, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    .3gpp, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    .aac, {926F41F7-003E-4382-9E84-9E953BE10562}, ADTS Byte Stream Handler, Preferred
    .ac3, {46031BA1-083F-47D9-8369-23C92BDAB2FF}, AC-3 Byte Stream Handler, Preferred
    .adt, {926F41F7-003E-4382-9E84-9E953BE10562}, ADTS Byte Stream Handler, Preferred
    .adts, {926F41F7-003E-4382-9E84-9E953BE10562}, ADTS Byte Stream Handler, Preferred
    .asf, {41457294-644C-4298-A28A-BD69F2C0CF3B}, ASF Byte Stream Handler, Preferred
    .avi, {7AFA253E-F823-42F6-A5D9-714BDE467412}, AVI Byte Stream Handler, Preferred
    .dvr-ms, {65964407-A5D8-4060-85B0-1CCD63F768E2}, dvr-ms Byte Stream Handler, Preferred
    .dvr-ms, {A8721937-E2FB-4D7A-A9EE-4EB08C890B6E}, MF SBE Source ByteStreamHandler
    .ec3, {46031BA1-083F-47D9-8369-23C92BDAB2FF}, AC-3 Byte Stream Handler, Preferred
    .m2t, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    .m2ts, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    .m4a, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    .m4v, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    .mod, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    .mov, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    .mp2v, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    .mp3, {A82E50BA-8E92-41EB-9DF2-433F50EC2993}, MP3 Byte Stream Handler, Preferred
    .mp4, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    .mp4v, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    .mpa, {A82E50BA-8E92-41EB-9DF2-433F50EC2993}, MP3 Byte Stream Handler, Preferred
    .mpeg, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    .mpg, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    .mts, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    .nsc, {B084785C-DDE0-4D30-8CA8-05A373E185BE}, NSC Byte Stream Handler, Preferred
    .sami, {7A56C4CB-D678-4188-85A8-BA2EF68FA10D}, SAMI Byte Stream Handler, Preferred
    .smi, {7A56C4CB-D678-4188-85A8-BA2EF68FA10D}, SAMI Byte Stream Handler, Preferred
    .tod, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    .ts, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    .tts, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    .vob, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    .wav, {42C9B9F5-16FC-47EF-AF22-DA05F7C842E3}, WAV Byte Stream Handler, Preferred
    .wm, {41457294-644C-4298-A28A-BD69F2C0CF3B}, ASF Byte Stream Handler, Preferred
    .wma, {41457294-644C-4298-A28A-BD69F2C0CF3B}, ASF Byte Stream Handler, Preferred
    .wmv, {41457294-644C-4298-A28A-BD69F2C0CF3B}, ASF Byte Stream Handler, Preferred
    .wtv, {65964407-A5D8-4060-85B0-1CCD63F768E2}, WTV Byte Stream Handler, Preferred
    audio/3gpp, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    audio/3gpp2, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    audio/aac, {926F41F7-003E-4382-9E84-9E953BE10562}, ADTS Byte Stream Handler, Preferred
    audio/aacp, {926F41F7-003E-4382-9E84-9E953BE10562}, ADTS Byte Stream Handler, Preferred
    audio/eac3, {46031BA1-083F-47D9-8369-23C92BDAB2FF}, AC-3 Byte Stream Handler, Preferred
    audio/L16, {3FFB3B8C-EB99-472B-8902-E1C1B05F07CF}, LPCM Byte Stream Handler, Preferred
    audio/mp3, {A82E50BA-8E92-41EB-9DF2-433F50EC2993}, MP3 Byte Stream Handler, Preferred
    audio/mp4, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    audio/mpa, {A82E50BA-8E92-41EB-9DF2-433F50EC2993}, MP3 Byte Stream Handler, Preferred
    audio/mpeg, {A82E50BA-8E92-41EB-9DF2-433F50EC2993}, MP3 Byte Stream Handler, Preferred
    audio/mpeg3, {A82E50BA-8E92-41EB-9DF2-433F50EC2993}, MP3 Byte Stream Handler, Preferred
    audio/vnd.dlna.adts, {926F41F7-003E-4382-9E84-9E953BE10562}, ADTS Byte Stream Handler, Preferred
    audio/vnd.dolby.dd-raw, {46031BA1-083F-47D9-8369-23C92BDAB2FF}, AC-3 Byte Stream Handler, Preferred
    audio/wav, {42C9B9F5-16FC-47EF-AF22-DA05F7C842E3}, WAV Byte Stream Handler, Preferred
    audio/x-aac, {926F41F7-003E-4382-9E84-9E953BE10562}, ADTS Byte Stream Handler, Preferred
    audio/x-m4a, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    audio/x-mp3, {A82E50BA-8E92-41EB-9DF2-433F50EC2993}, MP3 Byte Stream Handler, Preferred
    audio/x-mpeg, {A82E50BA-8E92-41EB-9DF2-433F50EC2993}, MP3 Byte Stream Handler, Preferred
    audio/x-ms-wma, {41457294-644C-4298-A28A-BD69F2C0CF3B}, ASF Byte Stream Handler, Preferred
    audio/x-wav, {42C9B9F5-16FC-47EF-AF22-DA05F7C842E3}, WAV Byte Stream Handler, Preferred
    video/3gpp, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    video/3gpp2, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    video/avi, {7AFA253E-F823-42F6-A5D9-714BDE467412}, AVI Byte Stream Handler, Preferred
    video/mp4, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    video/mpeg, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    video/msvideo, {7AFA253E-F823-42F6-A5D9-714BDE467412}, AVI Byte Stream Handler, Preferred
    video/vnd.dlna.mpeg-tts, {40871C59-AB40-471F-8DC3-1F259D862479}, MPEG2 Byte Stream Handler, Preferred
    video/x-m4v, {271C3902-6095-4C45-A22F-20091816EE9E}, MPEG4 Byte Stream Handler, Preferred
    video/x-ms-asf, {41457294-644C-4298-A28A-BD69F2C0CF3B}, ASF Byte Stream Handler, Preferred
    video/x-ms-wm, {41457294-644C-4298-A28A-BD69F2C0CF3B}, ASF Byte Stream Handler, Preferred
    video/x-ms-wmv, {41457294-644C-4298-A28A-BD69F2C0CF3B}, ASF Byte Stream Handler, Preferred
    video/x-msvideo, {7AFA253E-F823-42F6-A5D9-714BDE467412}, AVI Byte Stream Handler, Preferred
    Media Foundation Scheme Handlers
    [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows Media Foundation\SchemeHandlers]
    [HKEY_LOCAL_MACHINE\Software\Classes\MediaFoundation\MediaSources\Preferred]
    <URL type>, <handler CLSID>, <brief description>[, Preferred]
    file:, {477EC299-1421-4BDD-971F-7CCB933F21AD}, File Scheme Handler, Preferred
    http:, {44CB442B-9DA9-49DF-B3FD-023777B16E50}, Http Scheme Handler
    http:, {9EC4B4F9-3029-45AD-947B-344DE2A249E2}, Urlmon Scheme Handler
    http:, {E9F4EBAB-D97B-463E-A2B1-C54EE3F9414D}, Net Scheme Handler, Preferred
    httpd:, {44CB442B-9DA9-49DF-B3FD-023777B16E50}, Http Scheme Handler, Preferred
    httpnd:, {2EEEED04-0908-4CDB-AF8F-AC5B768A34C9}, Drm Scheme Handler, Preferred
    https:, {37A61C8B-7F8E-4D08-B12B-248D73E9AB4F}, Secure Http Scheme Handler, Preferred
    httpsd:, {37A61C8B-7F8E-4D08-B12B-248D73E9AB4F}, Secure Http Scheme Handler, Preferred
    httpt:, {E9F4EBAB-D97B-463E-A2B1-C54EE3F9414D}, Net Scheme Handler, Preferred
    httpu:, {E9F4EBAB-D97B-463E-A2B1-C54EE3F9414D}, Net Scheme Handler, Preferred
    mcast:, {E9F4EBAB-D97B-463E-A2B1-C54EE3F9414D}, Net Scheme Handler, Preferred
    mms:, {E9F4EBAB-D97B-463E-A2B1-C54EE3F9414D}, Net Scheme Handler, Preferred
    ms-appdata:, {CFC81939-3886-4ACF-9692-DA58037AE716}, MsAppData Scheme Handler, Preferred
    ms-appx-web:, {8DB0224B-3D65-4F6F-8E12-BEB4B78B8974}, MsAppxWeb Scheme Handler, Preferred
    ms-appx:, {8DB0

    BUMP. I've got the same issue. Came after an adobe AIR crash. Anyone have a solution. I see that there were 293 views before me, so if anyone has a solution or a guess, it seems that it could be very helpful. I, for one, would be quite grateful.
    Thanks.

  • Apple 23 Cinema not working with nvidia 5200...help!!!

    Hey all!
    I have an Apple 23" Cinema that is not working with my Windows XP machine using an NVIDIA 5200 128meg graphics card. The montior, when booting Windows, just flashes its power light 3 times...goes off...then repeats the sequence.
    So, I tried a Dell 2007WFP with the XP machine using the DVI port of the card. When booting, it seems like it's going to fire up the monitor (shows splash screen and Windows logo) but then goes blank when it hits the desktop.
    Oddly enough, when I plug in my Apple 30" into the DVI port of the NVIDIA card, it works just great. No fuss or muss (other than a resolution change).
    The 23" also works fine with my MacPro BTW so I know the monitor is golden.
    Any takers on this one?
    Thanks in advance!

    Hi Talon, I just accidentally came across your thread. Maybe I can help. I own a 23-inch cinema HD display but mine is ADC and I have to run mine through an ADC to DVI adapter.
    Anyways on to the discussion...
    The nvidia 5200 is a rather old-ish card (or chipset). The feature set in these older cards are not necessarily symmetrically reciprocal (what?) throughout the feature set. In other words, the feature may work in one mode and not in the another mode...etc...
    You may have seen these specs on your 5200 card/chipset:
    +Dual RAMDACs (up to 400 MHz) for display resolutions up to and including 2048×1536 @ 85Hz+
    and thought this would be great, my resolution is less than that @ 1920x1200 on my 23-inch cinema display. However I believe this may be referring only to the vga output signal and not the DVI. Read on...
    Further down in the specs for the 5200 card/chipset you'll see:
    +DVI support for compatibility with nextgeneration flat panel displays with resolutions up to and including 1600×1200+
    Unfortunately, this is not enough resolution to power your 23-inch display at 1920x1200. Windows may even show the resolution 1920x1200 as available (if you're able to get to the screen) but what I think it's not telling you, it that in order for you to be able to use that resolution you'll need to switch to dual mode DVI, and the card does this automatically.
    For example: 640x800 to 1600x1200 uses single mode DVI and anything above that (like our 23-inch cinema HD monitors @ 1920x1200) +using this particular card/chipset+ will be using dual mode DVI whether the monitor can support that mode or not. From my experience with my HD cinema it uses single mode DVI.
    As someone said above your 23-inch is in *single mode DVI* and from my experience only accepts *single mode DVI input* from the graphics card.
    From my understanding of the specs and your description of the delimma, I would suppose that you are able to get the 30 inch display to work because the 30 inch is a *dual mode DVI monitor* and your graphics card does work in dual DVI mode up to your 30-inch resolution but ONLY in dual DVI mode.
    Here are the specs on it:
    http://www.nvidia.com/page/pg_20040109440047.html
    I hope this helps you out.
    If you were to ask my recommendation, I'd go buy a new video card that has higher resolution on the single mode DVI output. I can tell you that my ATI 2600 HD Pro (AGP) (windows version, not mac only) has two DVI ports that are both dual mode DVI capable but also dumb down to single mode DVI signaling at high enough resolution to support our 23-inch cinema HD single mode DVI displays.
    Good luck!
    Dibit

  • KM4M-L Video not working (1337 needs help)

    KM4M-L
    2500XP
    2-512Mb Corsair 3200 XMS
    ONBOARD VIDEO OUT NOT WORKING.
    AGP VIDEO OUT NOT WORKING.
    Brand new MB and components.
    Computer is POSTing ... I think (I can hear the beep and the keyboard lights up.)
    I have tried all configurations and know all other components to be FINE.  (i.e. monitor, PSU, and RAM are WORKING)
    I have reset the CMOS jumper.  I have RTFM.
    Problem exists between user and solution.  Is it my MB and has anyone else had this problem?  I think this is a defective MB.  This is my last ditch effort before I RMA it.
    Thanks!

    thanks for the suggestions, gents. (even though one was insulting)
    I mean.. the CPU comment I can understand a mistake but, the RAM comment?!  We all know that RAM will run at a lower speed than its rating in accordance with the MB.
    I already have an Nforce2 system.  This system is SFF.  The link you provided is ATX.
    PSU is Antec Smart Power 350W.  This PSU works in other systems.
    Yeah, I had both power plugs connected. (4pin and ATX)
    I am going to replace the CPU with a 266Mhz FSB and see is that helps.

  • Copy to disk utility not working right

    My disk utility not work like it used to, it does not show up a disk when I put it in the drive. And I can't copy to disk anymore. A blank disk shows up as a removeable drive instead of a blank disk on the disk utility...??? I need to fix this so I can back-up my files and free up some space, help please?
    Dual 1.42 GHz PowerPC G4   Mac OS X (10.3.9)   2MB L3 cache per procesor 1.5 GB DDR SDRAM extra 250G HD

    Hi-
    The last time I saw a similar problem to yours, he was also running Panther. I advised reinstalling the 10.3.9 combo update, and his woes were gone.
    http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
    Another thought is to check System Preferences/CD's & DVD'S, and check your selection nuder "When you insert a blank CD" (or DVD).
    Running Disk Utility from the install disk, and repairing permissions is also another possible fix.
    G4 AGP(450)Sawtooth   Mac OS X (10.4.8)   2ghzPPC,1.62gbSDRAM, ATI9800, DVR-109,(IntHD)120&160,LaCie160,23"Cinema Display

  • Acer C710 - USB Ports not working with patched kernel

    I have an...
    Acer C710-844G01ii
    I have replaced the original SSD with a Mushkin 120GB SSD (MKNSSDCR120GB-7)
    I've used John Lewis' script at https://johnlewis.ie to flash the firmware. It works great. It loads 64 bit dual arch iso (2014.10.01) written to a USB flashdrive (Well, I'm actually using SD card in a USB reader. Not sure if that makes a difference) without having to utilize the workaround listed on the Chromebook wiki page (https://wiki.archlinux.org/index.php/Ch … stallation). I just create a regular arch bootable usb and it seems to work fine. I can use the bootable USB tools. I can install arch to the hard disk fine. (I did this a couple of times on the original SSD that came with the chromebook before I replaced it, so I know it works without having to change the SSD).
    The problem I'm having occurs after I install the patched kernel (linux-chromebook-3.16.4-1-x86_64 or linux-mainline-chromebook-3.17-1-x86_64 I've tried them both. Both times I wiped the hard drive and went through the entire install process from scratch). After booting, everything loads up fine except that I lose functionality of my USB ports. The custom BIOS still reads the arch bootable USB if I choose to boot into it. If I boot from the hard drive though, as soon as the patched kernel loads, the USB ports are not working.
    The output of
    dmesg | tail
    is the same before and after inserting a flash drive into a usb port.
    Running the command
    lsusb
    gives output
    unable to initialize libusb: -99

    Updated the system, now using arch kernel 3.17.1-1
    Problem still exists.
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.17.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=572dffe4-4501-4df5-967f-c535313cfa24 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acee3fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000acee4000-0x00000000af9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Google Parrot/Parrot, BIOS 4.0-6588-g4acd8ea-dirty 09/04/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-back
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0AD000000 mask FFF000000 uncachable
    [ 0.000000] 1 base 0AE000000 mask FFE000000 uncachable
    [ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
    [ 0.000000] 3 base 0C0000000 mask FF0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 write-combining
    [ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xacee4 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] reserving inaccessible SNB gfx pages
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
    [ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
    [ 0.000000] [mem 0x14f400000-0x14f5fffff] page 2M
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
    [ 0.000000] [mem 0x14c000000-0x14f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
    [ 0.000000] [mem 0x100000000-0x14bffffff] page 2M
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x40200000-0xacee3fff]
    [ 0.000000] [mem 0x40200000-0xacdfffff] page 2M
    [ 0.000000] [mem 0xace00000-0xacee3fff] page 4k
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x379a0000-0x37cc7fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F6DD0 000024 (v02 CORE )
    [ 0.000000] ACPI: XSDT 0x00000000ACFEF0E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: FACP 0x00000000ACFF2720 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
    [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20140724/tbfadt-618)
    [ 0.000000] ACPI: DSDT 0x00000000ACFEF250 0034C7 (v02 COREv4 COREBOOT 20110725 INTL 20140114)
    [ 0.000000] ACPI: FACS 0x00000000ACFEF210 000040
    [ 0.000000] ACPI: HPET 0x00000000ACFF2820 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: APIC 0x00000000ACFF2860 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: MCFG 0x00000000ACFF28C0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: SSDT 0x00000000ACFF3900 000818 (v02 CORE COREBOOT 0000002A CORE 0000002A)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
    [ 0.000000] NODE_DATA [mem 0x14f5fa000-0x14f5fdfff]
    [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ac00000-ffff88014ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x14f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
    [ 0.000000] node 0: [mem 0x40200000-0xacee3fff]
    [ 0.000000] node 0: [mem 0x100000000-0x14f5fffff]
    [ 0.000000] On node 0 totalpages: 1032322
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 158 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10988 pages used for memmap
    [ 0.000000] DMA32 zone: 703204 pages, LIFO batch:31
    [ 0.000000] Normal zone: 5080 pages used for memmap
    [ 0.000000] Normal zone: 325120 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xada00000-0xaf9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x508
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xacee4000-0xaf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
    [ 0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88014f200000 s86848 r8192 d23744 u1048576
    [ 0.000000] pcpu-alloc: s86848 r8192 d23744 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016032
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=572dffe4-4501-4df5-967f-c535313cfa24 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3981852K/4129288K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 147436K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [ 0.000000] NR_IRQS:8448 nr_irqs:440 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1097.469 MHz processor
    [ 0.000073] Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.39 BogoMIPS (lpj=3658230)
    [ 0.000078] pid_max: default: 32768 minimum: 301
    [ 0.000089] ACPI: Core revision 20140724
    [ 0.005690] ACPI: All ACPI Tables successfully acquired
    [ 0.008808] Security Framework initialized
    [ 0.008819] Yama: becoming mindful.
    [ 0.009391] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.011193] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.012001] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.012017] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.012360] Initializing cgroup subsys memory
    [ 0.012370] Initializing cgroup subsys devices
    [ 0.012374] Initializing cgroup subsys freezer
    [ 0.012378] Initializing cgroup subsys net_cls
    [ 0.012382] Initializing cgroup subsys blkio
    [ 0.012420] CPU: Physical Processor ID: 0
    [ 0.012422] CPU: Processor Core ID: 0
    [ 0.012432] mce: CPU supports 7 MCE banks
    [ 0.012454] CPU0: Thermal monitoring enabled (TM1)
    [ 0.012472] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [ 0.012675] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
    [ 0.014781] ftrace: allocating 20674 entries in 81 pages
    [ 0.037109] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.070117] smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.070132] TSC deadline timer enabled
    [ 0.070178] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.070223] ... version: 3
    [ 0.070226] ... bit width: 48
    [ 0.070228] ... generic registers: 8
    [ 0.070230] ... value mask: 0000ffffffffffff
    [ 0.070232] ... max period: 0000ffffffffffff
    [ 0.070234] ... fixed-purpose events: 3
    [ 0.070237] ... event mask: 00000007000000ff
    [ 0.090307] x86: Booting SMP configuration:
    [ 0.090312] .... node #0, CPUs: #1
    [ 0.103535] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.103559] x86: Booted up 1 node, 2 CPUs
    [ 0.103563] smpboot: Total of 2 processors activated (4391.78 BogoMIPS)
    [ 0.105926] devtmpfs: initialized
    [ 0.112736] pinctrl core: initialized pinctrl subsystem
    [ 0.112812] RTC time: 0:25:43, date: 10/27/14
    [ 0.112986] NET: Registered protocol family 16
    [ 0.113224] cpuidle: using governor ladder
    [ 0.113230] cpuidle: using governor menu
    [ 0.113291] ACPI: bus type PCI registered
    [ 0.113295] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.113438] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.113443] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.113650] PCI: Using configuration type 1 for base access
    [ 0.124189] ACPI: Added _OSI(Module Device)
    [ 0.124193] ACPI: Added _OSI(Processor Device)
    [ 0.124196] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.124199] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.130313] ACPI: Interpreter enabled
    [ 0.130327] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    [ 0.130336] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    [ 0.130364] ACPI: (supports S0 S3 S4 S5)
    [ 0.130367] ACPI: Using IOAPIC for interrupt routing
    [ 0.130407] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.136949] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.136960] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.137053] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.137240] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
    [ 0.137249] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.137502] PCI host bridge to bus 0000:00
    [ 0.137507] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.137512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.137515] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.137519] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.137523] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.137526] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.137529] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.137533] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.137536] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.137540] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.137543] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.137547] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.137550] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.137553] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.137557] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.137560] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 0.137564] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
    [ 0.137567] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 0.137583] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [ 0.137752] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
    [ 0.137774] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
    [ 0.137786] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.137796] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
    [ 0.138004] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.138046] pci 0000:00:16.0: reg 0x10: [mem 0xe0706100-0xe070610f 64bit]
    [ 0.138188] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.138353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.138392] pci 0000:00:1a.0: reg 0x10: [mem 0xe0705800-0xe0705bff]
    [ 0.138555] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.138624] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.138714] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.138746] pci 0000:00:1b.0: reg 0x10: [mem 0xe0700000-0xe0703fff 64bit]
    [ 0.138900] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.138967] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.139051] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
    [ 0.139207] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.139354] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
    [ 0.139506] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.139671] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.139708] pci 0000:00:1d.0: reg 0x10: [mem 0xe0705c00-0xe0705fff]
    [ 0.139869] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.139938] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.140021] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
    [ 0.140331] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.140373] pci 0000:00:1f.2: reg 0x10: [io 0x1060-0x1067]
    [ 0.140391] pci 0000:00:1f.2: reg 0x14: [io 0x1070-0x1073]
    [ 0.140409] pci 0000:00:1f.2: reg 0x18: [io 0x1068-0x106f]
    [ 0.140427] pci 0000:00:1f.2: reg 0x1c: [io 0x1074-0x1077]
    [ 0.140444] pci 0000:00:1f.2: reg 0x20: [io 0x1040-0x105f]
    [ 0.140461] pci 0000:00:1f.2: reg 0x24: [mem 0xe0705000-0xe07057ff]
    [ 0.140568] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.140707] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.140738] pci 0000:00:1f.3: reg 0x10: [mem 0xe0706000-0xe07060ff 64bit]
    [ 0.140781] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
    [ 0.140941] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.140981] pci 0000:00:1f.6: reg 0x10: [mem 0xe0704000-0xe0704fff 64bit]
    [ 0.141361] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
    [ 0.141432] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
    [ 0.141586] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
    [ 0.141772] pci 0000:01:00.0: supports D1 D2
    [ 0.141776] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.146966] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.146982] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
    [ 0.147186] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
    [ 0.147261] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit pref]
    [ 0.147314] pci 0000:02:00.0: reg 0x18: [mem 0xe0510000-0xe051ffff 64bit pref]
    [ 0.147412] pci 0000:02:00.0: reg 0x30: [mem 0xe0600000-0xe06007ff pref]
    [ 0.147646] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.147839] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
    [ 0.147913] pci 0000:02:00.1: reg 0x10: [mem 0xe0520000-0xe052ffff 64bit pref]
    [ 0.148270] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
    [ 0.153657] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.153672] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
    [ 0.153686] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
    [ 0.153903] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
    [ 0.153995] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
    [ 0.154081] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
    [ 0.154165] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
    [ 0.154248] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
    [ 0.154330] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.154413] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.154495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.155375] ACPI: Enabled 1 GPEs in block 00 to 3F
    [ 0.155452] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.155654] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.155658] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.155664] vgaarb: loaded
    [ 0.155666] vgaarb: bridge control possible 0000:00:02.0
    [ 0.155751] PCI: Using ACPI for IRQ routing
    [ 0.159478] PCI: pci_cache_line_size set to 64 bytes
    [ 0.159577] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    [ 0.159581] e820: reserve RAM buffer [mem 0xacee4000-0xafffffff]
    [ 0.159584] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
    [ 0.159796] NetLabel: Initializing
    [ 0.159799] NetLabel: domain hash size = 128
    [ 0.159801] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.159829] NetLabel: unlabeled traffic allowed by default
    [ 0.159874] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.159885] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.161931] Switched to clocksource hpet
    [ 0.171668] pnp: PnP ACPI init
    [ 0.171847] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.171852] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.171857] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.171861] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.171865] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.171869] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.171873] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.171877] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.171881] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.171885] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
    [ 0.171891] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.172584] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.172590] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.172671] system 00:02: [io 0x0500-0x057f] could not be reserved
    [ 0.172676] system 00:02: [io 0x0480-0x04bf] has been reserved
    [ 0.172681] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.172727] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.172802] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.172844] pnp: PnP ACPI: found 5 devices
    [ 0.181140] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.181153] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
    [ 0.181169] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.181179] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
    [ 0.181187] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
    [ 0.181201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.181205] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.181209] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.181212] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.181216] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.181219] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.181223] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
    [ 0.181226] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
    [ 0.181230] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
    [ 0.181233] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
    [ 0.181237] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
    [ 0.181240] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
    [ 0.181243] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
    [ 0.181247] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
    [ 0.181250] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
    [ 0.181254] pci_bus 0000:00: resource 19 [mem 0xafa00000-0xfebfffff]
    [ 0.181257] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
    [ 0.181262] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
    [ 0.181266] pci_bus 0000:02: resource 1 [mem 0xe0600000-0xe06fffff]
    [ 0.181269] pci_bus 0000:02: resource 2 [mem 0xe0500000-0xe05fffff 64bit pref]
    [ 0.181319] NET: Registered protocol family 2
    [ 0.181671] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.181835] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.181980] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.182017] TCP: reno registered
    [ 0.182031] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.182066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.182162] NET: Registered protocol family 1
    [ 0.182192] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.182773] PCI: CLS 64 bytes, default 64
    [ 0.182860] Unpacking initramfs...
    [ 0.302677] Freeing initrd memory: 3232K (ffff8800379a0000 - ffff880037cc8000)
    [ 0.302693] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.302698] software IO TLB [mem 0xa8ee4000-0xacee4000] (64MB) mapped at [ffff8800a8ee4000-ffff8800acee3fff]
    [ 0.302960] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.303038] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
    [ 0.303051] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
    [ 0.303148] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.303201] Scanning for low memory corruption every 60 seconds
    [ 0.303637] futex hash table entries: 512 (order: 3, 32768 bytes)
    [ 0.303657] Initialise system trusted keyring
    [ 0.304287] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.307213] zpool: loaded
    [ 0.307219] zbud: loaded
    [ 0.307572] VFS: Disk quotas dquot_6.5.2
    [ 0.307644] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.307867] msgmni has been set to 7783
    [ 0.307975] Key type big_key registered
    [ 0.308262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.308317] io scheduler noop registered
    [ 0.308322] io scheduler deadline registered
    [ 0.308380] io scheduler cfq registered (default)
    [ 0.308697] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    [ 0.308978] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    [ 0.309161] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.309165] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 0.309172] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.309208] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.309212] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.309215] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
    [ 0.309223] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.309253] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.309285] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.309344] vesafb: mode is 1366x768x32, linelength=5504, pages=0
    [ 0.309346] vesafb: scrolling: redraw
    [ 0.309350] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.309380] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004780000, using 4160k, total 4160k
    [ 0.315773] Console: switching to colour frame buffer device 170x48
    [ 0.321847] fb0: VESA VGA frame buffer device
    [ 0.321882] intel_idle: MWAIT substates: 0x21120
    [ 0.321884] intel_idle: v0.4 model 0x2A
    [ 0.321887] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.322122] GHES: HEST is not enabled!
    [ 0.322261] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.323099] Linux agpgart interface v0.103
    [ 0.323175] rtc_cmos 00:03: RTC can wake from S4
    [ 0.323405] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.323444] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.323464] Intel P-state driver initializing.
    [ 0.323700] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.323974] TCP: cubic registered
    [ 0.324249] NET: Registered protocol family 10
    [ 0.324810] NET: Registered protocol family 17
    [ 0.325630] Loading compiled-in X.509 certificates
    [ 0.325667] registered taskstats version 1
    [ 0.326469] Magic number: 2:425:406
    [ 0.326624] rtc_cmos 00:03: setting system clock to 2014-10-27 00:25:43 UTC (1414369543)
    [ 0.326771] PM: Hibernation image not present or could not be loaded.
    [ 0.328979] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
    [ 0.328984] Write protecting the kernel read-only data: 8192k
    [ 0.334234] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
    [ 0.336362] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    [ 0.352574] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.355532] systemd-udevd[47]: starting version 216
    [ 0.387858] ACPI: bus type USB registered
    [ 0.387913] usbcore: registered new interface driver usbfs
    [ 0.387936] usbcore: registered new interface driver hub
    [ 0.388039] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.388042] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.391270] usbcore: registered new device driver usb
    [ 0.392129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.392223] sdhci: Secure Digital Host Controller Interface driver
    [ 0.392228] sdhci: Copyright(c) Pierre Ossman
    [ 0.392414] ehci-pci: EHCI PCI platform driver
    [ 0.392656] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.392671] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.392674] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
    [ 0.392714] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.393158] sdhci-pci 0000:02:00.1: No vmmc regulator found
    [ 0.393163] sdhci-pci 0000:02:00.1: No vqmmc regulator found
    [ 0.395522] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
    [ 0.397372] SCSI subsystem initialized
    [ 0.400613] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.400649] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0705800
    [ 0.402598] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.402906] libata version 3.00 loaded.
    [ 0.408631] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.408994] hub 1-0:1.0: USB hub found
    [ 0.409010] hub 1-0:1.0: 3 ports detected
    [ 0.409474] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.409486] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.409509] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.413433] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.413449] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0705c00
    [ 0.421967] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.422311] hub 2-0:1.0: USB hub found
    [ 0.422325] hub 2-0:1.0: 3 ports detected
    [ 0.422611] ahci 0000:00:1f.2: version 3.0
    [ 0.422819] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
    [ 0.422858] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.422890] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
    [ 0.422896] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
    [ 0.425306] scsi host0: ahci
    [ 0.427777] scsi host1: ahci
    [ 0.430423] scsi host2: ahci
    [ 0.431139] scsi host3: ahci
    [ 0.431256] ata1: SATA max UDMA/133 abar m2048@0xe0705000 port 0xe0705100 irq 26
    [ 0.431260] ata2: DUMMY
    [ 0.431262] ata3: DUMMY
    [ 0.431265] ata4: DUMMY
    [ 0.475720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.715469] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.748738] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.760911] ata1.00: ATA-8: MKNSSDCR120GB-7, 582ABBF0, max UDMA/133
    [ 0.760921] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 0.770881] ata1.00: configured for UDMA/133
    [ 0.771363] scsi 0:0:0:0: Direct-Access ATA MKNSSDCR120GB-7 BBF0 PQ: 0 ANSI: 5
    [ 0.782066] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 0.782627] sd 0:0:0:0: [sda] Write Protect is off
    [ 0.782637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.782810] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.785152] sda: sda1 sda2 sda3
    [ 0.786014] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 0.839907] hub 1-1:1.0: USB hub found
    [ 0.840119] hub 1-1:1.0: 4 ports detected
    [ 0.935913] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 0.945475] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.069643] hub 2-1:1.0: USB hub found
    [ 1.069827] hub 2-1:1.0: 4 ports detected
    [ 1.148949] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 1.233928] usb 1-1.1: string descriptor 0 read error: -22
    [ 1.290134] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 1.305272] tsc: Refined TSC clocksource calibration: 1097.506 MHz
    [ 1.315437] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 1.344309] systemd-udevd[136]: starting version 216
    [ 1.352295] systemd-journald[119]: Received request to flush runtime journal from PID 1
    [ 1.607498] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.610413] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    [ 1.610471] ACPI: Lid Switch [LID0]
    [ 1.610565] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 1.610572] ACPI: Power Button [PWRB]
    [ 1.610653] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
    [ 1.610657] ACPI: Sleep Button [TPAD]
    [ 1.610758] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 1.610763] ACPI: Power Button [PWRF]
    [ 1.626490] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X
    [ 1.645724] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.645942] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
    [ 1.653739] thermal LNXTHERM:00: registered as thermal_zone0
    [ 1.653745] ACPI: Thermal Zone [THRM] (0 C)
    [ 1.660772] [Firmware Bug]: battery: (dis)charge rate invalid.
    [ 1.665282] ACPI: Battery Slot [BATX] (battery present)
    [ 1.666038] ACPI: AC Adapter [AC] (on-line)
    [ 1.681337] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20140724/utaddress-258)
    [ 1.681351] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681358] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
    [ 1.681364] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681367] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
    [ 1.681374] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681376] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
    [ 1.681382] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681385] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 1.688249] [drm] Initialized drm 1.1.0 20060810
    [ 1.691201] pps_core: LinuxPPS API ver. 1 registered
    [ 1.691207] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 1.700706] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 1.701200] PTP clock support registered
    [ 1.706524] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 1.752871] tg3.c:v3.137 (May 11, 2014)
    [ 1.753314] Adding 8167872k swap on /dev/sda2. Priority:-1 extents:1 across:8167872k SSFS
    [ 1.757127] Bluetooth: Core ver 2.19
    [ 1.757151] NET: Registered protocol family 31
    [ 1.757154] Bluetooth: HCI device and connection manager initialized
    [ 1.757166] Bluetooth: HCI socket layer initialized
    [ 1.757170] Bluetooth: L2CAP socket layer initialized
    [ 1.757180] Bluetooth: SCO socket layer initialized
    [ 1.771585] usbcore: registered new interface driver btusb
    [ 1.771864] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
    [ 1.777240] cfg80211: Calling CRDA to update world regulatory domain
    [ 1.812626] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 1.812635] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.812640] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 1.812643] sound hdaudioC0D0: mono: mono_out=0x0
    [ 1.812646] sound hdaudioC0D0: inputs:
    [ 1.812650] sound hdaudioC0D0: Internal Mic=0x1b
    [ 1.812654] sound hdaudioC0D0: Mic=0x19
    [ 1.819178] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:89:84:c7:a0:92
    [ 1.819187] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
    [ 1.819192] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [ 1.819196] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
    [ 1.834640] media: Linux media interface: v0.10
    [ 1.845475] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input7
    [ 1.849543] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 1.850477] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 1.850623] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 1.851058] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 1.851353] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 1.860140] iTCO_vendor_support: vendor-support=0
    [ 1.861704] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.861764] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
    [ 1.862721] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.863690] Linux video capture interface: v2.00
    [ 1.875723] usbcore: registered new interface driver ath3k
    [ 1.914247] tg3 0000:02:00.0 enp2s0f0: renamed from eth0
    [ 1.926001] systemd-udevd[145]: renamed network interface eth0 to enp2s0f0
    [ 1.938186] usb 1-1.1: USB disconnect, device number 3
    [ 1.944872] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336)
    [ 1.953353] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
    [ 1.953679] usbcore: registered new interface driver uvcvideo
    [ 1.953684] USB Video Class driver (1.1.1)
    [ 1.997073] intel_rapl: Found RAPL domain package
    [ 1.997080] intel_rapl: Found RAPL domain core
    [ 1.997083] intel_rapl: Found RAPL domain uncore
    [ 1.999325] [drm] Memory usable by graphics device = 2048M
    [ 1.999330] [drm] Replacing VGA console driver
    [ 1.999337] checking generic (d0000000 410000) vs hw (d0000000 10000000)
    [ 1.999340] fb: switching to inteldrmfb from VESA VGA
    [ 1.999399] Console: switching to colour dummy device 80x25
    [ 2.006114] i915 0000:00:02.0: irq 29 for MSI/MSI-X
    [ 2.006130] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 2.006133] [drm] Driver supports precise vblank timestamp query.
    [ 2.006275] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 2.010165] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:1f.3/i2c-0/0-0067/input/input14
    [ 2.014824] mousedev: PS/2 mouse device common for all mice
    [ 2.037823] ath: phy0: ASPM enabled: 0x43
    [ 2.037831] ath: EEPROM regdomain: 0x6c
    [ 2.037834] ath: EEPROM indicates we should expect a direct regpair map
    [ 2.037838] ath: Country alpha2 being used: 00
    [ 2.037840] ath: Regpair used: 0x6c
    [ 2.044014] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 2.044617] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90004980000, irq=17
    [ 2.050867] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
    [ 2.054438] fbcon: inteldrmfb (fb0) is primary device
    [ 2.054543] Console: switching to colour frame buffer device 170x48
    [ 2.054559] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 2.054563] i915 0000:00:02.0: registered panic notifier
    [ 2.066878] systemd-udevd[145]: renamed network interface wlan0 to wlp1s0
    [ 2.070905] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
    [ 2.125455] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
    [ 2.154830] tg3 0000:02:00.0: irq 30 for MSI/MSI-X
    [ 2.154842] tg3 0000:02:00.0: irq 31 for MSI/MSI-X
    [ 2.154849] tg3 0000:02:00.0: irq 32 for MSI/MSI-X
    [ 2.714571] Switched to clocksource tsc
    [ 2.714588] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
    [ 2.731648] usb 1-1.1: string descriptor 0 read error: -22
    [ 2.850571] random: nonblocking pool is initialized
    lsusb
    Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 004: ID 04f2:b336 Chicony Electronics Co., Ltd
    Bus 001 Device 005: ID 0489:e04e Foxconn / Hon Hai
    Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  • On my iPad is the App of TomTom not working because of GPS failure??

    Can Apple help me out?
    In the App-store there was no information about the GPS and the iPad, so i bought the TomTom-App... and that's not working without GPS and the iPad2 has no GPS.... I feel not happy

    I take it then that you have the iPad 2 wifi only model and not the wifi + 3G.
    iPad wifi + 3G has what is known as AGPS and works well with TomTom application on the iPad model with 3G. You would need some sort of external gps receiver to work with the iPad wifi model only.
    For example the iPod touch without Gps can use the tomtom car kit with it's built in gps chip inside the kit.
    Know one can help you here as this is a forum for Apple users.
    Contact Apple store and request a refund.

Maybe you are looking for

  • How do I stop an Apple ID popping up on my iPhone?

    My phone got taken in the park a few months ago, so I was using my dad's spare iPhone, and when I came to buy a new one I got the option to restore my new phone to the one that got stolen. Any way this girls Apple ID keeps on popping up on my phone a

  • Trying to get EDI Invoices working for purchasing

    I am trying to setup inbound Invoice processing using an INVOIC01 IDOC, Process Code INVL. As far as I can tell from my searches on the internet and from other sources, I have a syntactically correct IDOC and all of my config is correct, however I ge

  • Acceleration API in Parallels with SLS guest (and Rosetta support)

    Hi, after reading a lot about Rosetta's support to get it to work on my brand new MacBook Pro, I bought Parallels 8 in a Bundle and a copy of Snow Leopard Server from Apple to install on it and finally get Rosetta working. Great ! But... A lot of my

  • Can't import photos from iPhone into iPhoto

    If i try to do a batch import, it says there's a problem downloading an image. If I try to import one image, it says the file is in an recognizable format. It's a jpg. Any ideas how I can get my photos and videos off my iPhone and why it won't import

  • Simulate PO pricing

    Hello all, I am facing a bit of a challenge in finding a FM that would allow me to get the current price of a PO item (simulate pricing) that fits my requirements.  I have tried BAPI_PO_CREATE1 in test mode and ME_PO_PRICE_SIMULATION, which do what I