AGP card switch from old G5 to later G5 - Will it work?

I have a reconditioned G5 from 2005 that I picked up to replace by old crashed and burned G5 from 2003 or so
but it didn't come with a graphics card
NVIDIA GeForce 6600 LE with 128MB of GDDR SDRAM
So I was wondering if i took (cannibalized) the graphics card from my earlier G5 would it work in my later G5?
Anybody ever done that?
But probably I'll have to buy one. Anybody know where I can order G5 graphic cards?
thanks

Hi Ben,
Is it a late or early 2005 G5, the Late ones use PCIe graphics cards like the GeForce 6600 LE & have no AGP slot.
I'm no expert on FCP, but I wonder if it has a pref file from the old G5 that had an AGP card & stored that info in the pref file?
But then again, one of the System Requirements says AGP...
Macintosh computer with 350 MHZ Power PCG processor and AGP graphics card.
http://www.signvideo.com/how-to-set-up-final-cut-pro-4-non-linear-editing.htm

Similar Messages

TS1814 we bought an ipod touch and are having trouble switching from old ipod to the new one

we bought an ipod touch and are having trouble switching from old ipod to the new one

OK.
If you have a question, then explain your issue and ask it.

Do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use laptop. is there problem between apple and FB?

do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use my laptop(non-apple). is there problem between apple and FB?

Facebook apparently has their site coded poorly for tablets with touch screens. Try using the Facebook app. It is not perfect either but it is better than view in a browser lately.

I didn't back up my old iPhone when I got a new one. If I put my SIM card in my old iPhone and backup everything, will it transfer over to my new one?

I didn't back up my old iPhone when I got a new one. If I put my SIM card in my old iPhone and backup everything, will it transfer over to my new one?

Just back it up to your computer using iTunes By connecting it to your compute, launching iTunes, then going to File>Devices>Back Up (transfer purchases of prompted). Then restore the iTunes backup to your new phone.

Hey apple users. if i deaktivate my iphone because i got a new phone, can someome else put thier sin card in my old iphone and then it will work again? or does the phone stop working all together if i deactivate the phone on the support page?

hey apple users. if i deactivate my iphone because i got a new phone, can someome else put thier sin card in my old iphone and then it will work again? or does the phone stop working all together if i deactivate the phone on the support page?

Do this first:
http://support.apple.com/kb/HT5661
Then whoever gets the phone just sets things up again using their Apple ID.

I cannot get my messages/text messages to work om my Hi. I am sending this thru my iPad. Respond and let me know you got it. Fun fun fun. . I did go and try to another Apple ID different from my iPhone but it still will not work. Can anyone help me?

I cannot get my messages/text messages to work om my Hi. I am sending this thru my iPad. Respond and let me know you got it. Fun fun fun. . I did go and try to another Apple ID different from my iPhone but it still will not work. Can anyone help me?

chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

My iPhone 4 is 3 years old, and recently the Flash will only work WHEN it wants to... Anyone got any ideas what I need to do?

My iPhone 4 is 3 years old, and recently the Flash will only work WHEN it wants to... Anyone got any ideas what I need to do? Does it need to be repaird in an Apple store? if so does anyone know roughly how much it would be? Or would a simple Restore work?
Thank you in advance for replies

Take it to an Apple store. Most likely you will have to get a replacement for which you will be charged the replacement fee.
Rice only absorbs water. But it cannot prevent damage to the device.

I inherited an 2003 ipod from my daughter. The controls will not work when it is plugged into a power source. Can anyone help?

I inherited a 2003 ipod from my daughter. The controls will not work when it is plugged into a power source. Can anyone help?

But they work normally when not plugged in? What kind of power source are you plugging it into? It maybe outputting more than what the iPod can handle. I had this happen to an iPod I plugged into a powerstrip that was plugged into the cigarette lighter in a vehicle an experienced the same thing.
B-rock

Switch from MySQL to MS SQL Server, Query not working

I'm sure there is a simple setting somewhere for this, but cannot seem to find it and really would appreciate some assistance. Have an application which uses JDBC to connect to a MySQL DB to run the following query without an issue:
SELECT * FROM users
This returns the desired results. Changed to connect to MS SQL Server 2000 using the JDBC-ODBC bridge and the same query returns no results. The problem, SQL Server wants this query instead:
SELECT * FROM [users]
I don't want to have to change queries depending on the DB, as that is supposed to be one of the advantages of JDBC. Is there a setting in MySQL (or the JDBC driver) to have it work correctly if I pass table names in []? Or is there a setting in MS SQL Server (or in the JDBC, or ODBC) to have it accept queries without the []?
Or is there a different approach that I'm missing which would avoid this whole problem?
Thanks,
Matt

I suspect your database definitions are different. It has nothing to do with your java code.
The bracket syntax is used to indicate the more standard quoted identifiers in standard SQL.
Thus you could do this in oracle and in MS SQL Server...
SELECT * FROM "users"
I suspect that the above will work for your MS SQL Server database and will not work for your Oracle database. However if you created the table in oracle and specifically used "users" (with the double quotes around the name) when creating the table then it would work.
Of course if the database definitions are different it means you must use different SQL for each. Just as if the name of the table was 'other' rather than 'users'.

I took my 16 gb SD card out of my Galaxy S3 and it will not work in my S4...

Just wondering why my SD card will not work in my new phone... Its very frustrating. I took it out of my S3 last night, and put it directly into my new S4 and it wont mount.. I put in a different card and it worked fine@
.. Any way to retrieve all my photos and apps??

See my reply here: Cosmo 3 not recognizing microSD card old content
It's in reference to a different phone, but the same principle applies - the card needs to be formatted in the phone you want to use it in - and formatting erases everything, so copy the info to your computer FIRST, then format the card, and then copy things back. Or, as you did, use a different card. If you want the info form the original card, you'll have to go through the process I outlined above.

Switch to 2X Xeon 5680 6-core, Will this work?

Hello
My current set up of a 8 core 2.26 Xeon mac pro (Early 2009) has been giving me insufficient power for what i need to do. I am not willing to pay for the apple upgrade to only 2.93 for an 8 core, so I am considering upgrading to two six core 3.33 GHz Xeon X5680's, or two six core 2.93 GHz Xeon X5670's. (I chose those because i'm guessing two i7 980 processors won't fit on a Xeon board). Totalling 12 cores.
The question comes down to, will this work, will the processor fit in the socket? If so, what is involved, what risks are there, what changes would need to be made? Would it work on OS X, or would it only run under windows, etc? Or would it not even work at all?
(And i'd rather not buy a PC with that money.)
Thanks
-C

A single 6-core 3.33GHz w/ 3 x 8GB RAM, 4 hard drives, ATI 5870.
http://www.apple.com/macpro/specs.html
Mac Pro 2010 Configuration
Even the Apple Store Special has had the stock 2009 2.66GHz $2149 which can be an excellent value and investment. Very slim pickings lately, that could change after the 9th.
http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro
My 4 yr old Mac Pro doesn't feel any slower or the worse and maybe better than it did originally.
A ton of info on buying, performance, and strategies and how to optimize for photography and other applications:
http://macperformanceguide.com/
Some benchmarks of the newest iMac and others:
http://www.barefeats.com/mbpp16.html
http://www.barefeats.com/imac10g.html
http://www.barefeats.com/imac10c.html
http://www.barefeats.com/imac10.html
http://www.barefeats.com/imi7.html
http://www.barefeats.com/nehal17.html
http://www.anandtech.com/mac/showdoc.aspx?i=3597&p=11

Switching from Old Appraisal System to Management By Objective (MBO)

Dear fellow practitioners,
I have a requirement to switch or migrate from the OLD appraisal system to the NEW appraisal system (MBO).
Does anyone have any information of the implications of switching the value of REPLA in T77SO from blank to 'A' or 'X' when the old appraisal system is already configured previously and is to be replaced by the new appraisal system with similar business requirements?
There is an existing appraisal catalog configured for the old appraisal system. How do I migrate the Appraisal Models in the Appraisal Catalog of the OLD Appraisal system to the NEW Appraisal Catalog in MBO?
I have not been able to find much information with regards to this. Therefore, many thanks in advance to anyone who can shed some light or provide some references to this matter.

Hello,
have a look at note 728542
It was planned to use the switch to replace the appraisal functionality in only one of the applications; technically it's turned out, this was not possible.
For using the usual functionality for appraisals in training and event management (TEM), HAP00 REPLA has to be set to space.
All other settings: X, T, A will cause problems.The reason is that many transactions of TEM delegate work to the central appraisal component and there the swith to MBO functionality is done (in the case X, T and A).
It is however possible to use MBO functionality for personnel appraisals. The transactions of MBO have to be used 'directly'.
These transactions are not part of the menu but can be added to the favorites list.
PHAP_ADMIN_PA
PHAP_CHANGE_PA
PHAP_CREATE_PA
PHAP_PREPARE_PA
PHAP_SEARCH_PA
PHAP_CATALOG_PA
There is no recommended way to load historical appraisal data. You will have to write a customer-specific program for this purpose.
It depends on your specific requirements whether you really need the data in R/3. For example, if you need the data for reporting, it may be easier to load the legacy data directly into BW. If you need them for program logic, e.g. to default values for new appraisals, you could consider loading the data into a customer table and read that table in your implementation of an appropriate user exit.
Hope this help
Sarah

Can't switch from old Blackberry 8703e to new 8530

I installed the Blackberry Desktop Software. I connected the 8703e and the 8530 and tried to switch. The 8530 will shut off during the switch process. Then I get a fatal error from the BDS. Any ideas as to what I'm doing wrong. Is it because one is sooo old and one is soooo new? Thanks.

I don't think the replacement process will be any more complicated than you expect. However, if you want to keep your old Time Machine backup files, you'll have to move them from the old Time Capsule to the new. The current advice seems to be that this is best done by copying the backup image(s) from the old Time Capsule to an external disk, then copying from the external disk to the new Time Capsule. As far as the best way to perform the copying, I believe I saw a recommendation to use Disk Utility's "restore" function.

Switched from old iPhone toa new one. Mail probs.

Hi. Switch to the newer phone. go it home and synced it. Now my primary email no longer works sending or receiving. I use the hosting company Blue Host for my website and email.
Why would it not work on the new phone and not the old one? Did Apple change the new phone?
-Lars

Have you followed these instructions to get the details and settings from your old iPhone onto the new one?
http://support.apple.com/kb/HT2109
Need to restore the new iPhone with the backup of the old one

Lost playlists in switch from old comp to new. What to do?

I switched my files(saved an external HD) to my new iTunes library, but my playlists are gone. How do I get them back? If I plug in my iPod, can I get them back that way, or will they vanish when the iPod syncs?

Chris CA wrote:
I'll post my questions until someone gives me a helpful answer
No need to be rude and clog up the forums with needless duplicate posts.
Stick with one post unelss it's a different topic. That is standard forum etiquette across the internet, not just here.
The information is obviously there, why wouldn't it be able to be transferred?
Apple has not stated why they designed iTunes like they did.
I switched my files(saved an external HD) to my new iTunes library, but my playlists are gone. How do I get them back?
Would you explain exactly, in detail, what you "switched"?
Do you still have access to the old computer?
I downloaded iTunes to the new computer. I wanted to be able to access my files, and I was told, in a diff. topic, that one way to do that was to open iTunes and drag and drop the library file into the open iTunes window. I did this.
I have access to the old computer, but it's badly malfuntioning. Even if I can get it turned on and get access to the files, I'm worried that any files I take from the old HD will infect the new comp with whatever the old comp was infected with.
As for the playlists--couldn't I just use the On The Go function(i.e. make OTG playlists out of everything on the iPods, and just retitle once I plug into the comp?)?

AGP card switch from old G5 to later G5 - Will it work?

Similar Messages

Maybe you are looking for