AGP new hard drive help

I want to install a lager HD and I know that the ATA66 has a max of 128GB on the sawtooth. Now I remembered seeing a firewire (FW) port on the motherboard and I was wondering if anyone knows if I can use that connection as the internal HD. If I am right i think I can go as high as 200GB using FW.
Any input would be appreciated

Look at these links.
What Macs natively support large IDE drives? (over 128GB formatted)
http://forums.xlr8yourmac.com/action.lasso?-database=faq.fp3&-layout=FaqList&-re sponse=answer.faq.lasso&-recordID=34188&-search
How Big a Hard Drive Can I Put in My iMac, eMac, or Power Mac?
http://lowendmac.com/macdan/05/1024.html
Using 128 GB or Larger ATA Hard Drives
http://docs.info.apple.com/article.html?artnum=86178
The Power Mac Storage FAQ
http://www.omgili.com/preview/aHR0cDovL2ZvcnVtcy5tYWNubi5jb20vc2hvd3RocmVhZC5waH A/dD0yNDYzOTE=
 Cheers, Tom
PS - SpeedTools ATA Hi-Cap Support Driver: Allows the use of extended capacity ATA drives (drives greater than 128 Gigabytes in size) on older (Pre Mirrored Door) G4 and G3 Macintoshes running MacOS X versions 10.2 and later. Cost $24.95
http://www.speedtools.com/ATA6.shtml

Similar Messages

Install new hard drive HELP !!!

Hello, I just install a new 500gb hard drive into my uni mb replacing my 160gb. I have nothing really important to save from my previous hard drive. I am starting from scratch. After installing the new hard drive and inserting the disc 1 and press 'c'. Follow the screen instruction but only get to step 3 where screen ask ' SELECT A DESTINATION'. I have waited for 30 mins and all i see was the same screen. I am unable to click on options and continue cos they were greyed out. The only button that is nor grey is the 'go back'.
I am eagerly trying to get this new hard drive installed. What should i do next. Have tried the restart and all i am able to continue is until the Select a destination page.
Hope to get a good advice from here and .......
Thanking you in advance for all help and assistance.

Finally get the new hard drive installed from sratched. Once again many thanks to ypw. Once i clear the 'select a destination' step, the rest comes easy even for a novice like me.
Just for those who are curious to know the model of the hard drive that I installed. It is Hitachi 5K500 B-500. Choose this over the more popular WD Scorpion blue that most people are using.

Needs new hard drive- help required.

Hello all.
For reasons that don't really matter- my hard drive has become corrupt- I believe it is the recovery partition on the hard drive. The device won't restore to factory nor will it update. Sometimes I have to unplug it and plug it in just to get movies to play.
Basically- I need to rebuild a new hard drive with the Apple TV OS on it- and all 3 partitions, but I don't know:
1. Where to get the OS.
2. How to create that recovery partition successfully
I'm pretty sure if I could get a .dmg of the OS or whatever form it will come in that I can just load those files into the boot partition. The 3rd partition is just empty for storage, and trickiest of all (to me) is the apple recovery partition.
My Apple TV is a couple years old so it's out of warranty.
Thanks in advance.

1. Where to get the OS.
You can get the Apple TV OS! Just use a network sniffer while the Apple TV download the update and you'll find the address of the Apple server to go to download the OS on your mac. It appears that Apple only provides the 2 most recent versions of the Apple TV OS (As of today 3.01 and 2.4). Alternatively, you can google to find the address of the Apple Server. This info has been on the net forever and I just make sure to download a copy of the Apple TV OS each time a new version is released.
2. How to create that recovery partition successfully
I haven't yet use it to upgrade my Apple TV drive (waiting to be out of warranty) but the instructions available on the net to upgrade the drive should help on how to use the OS images instead of cloning a previous Apple TV drive.
I'd greatly appreciate if you could share your experience on how you got it done. This will also be very useful to go back to previous version of the OS higher than the version in the recovery partition.

No device list...new hard drive HELP

hard drive crashed...new hard drive now itunes doesnt recognize shuffle...computer does though? Can someone help me? i get a message saying the device is synched to another library, but there is no device list just library store and playlists so i cant get to the shuffle to dhange the settings to manually synch....help please.

Click OK to erase and hit return on your keyboard. That will wipe out the contents of the shuffle and let you reload it from the library...

New hard drive help (first timer)

alright, i bought a new hard drive to install into my macbook pro, as i am running out of space on my current hard drive, i bought a new one from OWC and it came with this little "instant external" pack to make the hard drive into an external so i can prepare it for making it the main hard drive. my dilemma is that i dont have my snow leopard recovery disks anymore, i must of lost them when i moved, is there anyway to put snow leopard onto the external(but going to be the new main hard drive)?
if not, is there a way i can make new recovery disks?

I am assuming your new drive is a lot bigger than your old one. So why not simply clone your boot drive on to the the new drive mounted in an external enclosure?
You can use any backup utility capable of cloning a bootable backup. Carbon Copy Cloner and Super Duper are two such utilities. I believe even Disk Utility's Restore function can do it too.
Once you have the clone, remove it from the enclosure and stick it in your machine.

NOT POSSIBLE TO START UP PAST GREY SCREEN, WOULD A NEW HARD DRIVE HELP

I have attempted all the different ways to startup past the grey screen but with no success, would a new hard drive rectify this problem?

What model MacBook do you have? What operating system is installed on it? Specifically, what things have you tried so far?
While installing a new hard drive would very likely fix this, it is probably overkill. It may be that all you need to do is reinstall the operating system.
Do you have an install DVD that came with the computer?
Best of luck.

New Hard Drive Help

Hey,
My Hp g56 notebook's hdd is getting close to having an imminent failure.. Which is my fault.. I dropped it.. again. Yeah, I'll be the first to admit I am kinda clumpy. This is the second time I've had to replace the hdd due to impact trama to the laptop. I carry is everywhere for work.
This weekend I'll be buying a new one and want to know if there are any recommended HDD or SSD out there that are less pronned to damage when dropped. Preferable ones below the price of 150 dollars.
This question was solved.
View Solution.

Hi,
Since HDD's use mechanical parts they are more easy to "die" than SSD's. Some computers have some sorts of shock protection, they use sensors to reduce the impact (such as military rated machines) but they are more expensive than our normal laptops.
For $150, you can buy a SSD for around 120Gb to 200Gb.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

Help restore new hard drive via time machine back up in time capsule

I have followed Pondini's How Do I Restore My Entire System from a backup on Time Capsule. I get all the way to section G with No Problem. I get to section H and my new Hard Drive does not appear in the Select a Destination box. The icon indicating the system is calculating the size of the volume keeps moving. Finally it stops searching/calculating and just offers the button "go back". For some reason it doesnt recognize my new HD. I open Disk Utility and perform a check and the hard drive appears to be working fine. Any help would be greatly appreciated.

Are you sure you formatted the new drive properly, per section (c) there?
If that's not right, you can't install OSX on it.

Please help! Cannot access TC backups on new hard drive with Lion!

I know this seems like a generic posting, and believe me that I have searched through countless posts to find the situation most similar to mine. To start, the basic story (I am pretty computer illiterate, so excuse the lack of terminology):
-My computer was working slow, beach balling, etc. two weeks ago - took to Apple Genius Bar for help and they suggested need for new hard drive. I already had a hard drive crash in January, but since I have had a Time Capsule running Time Machine since September 2009, I hooked it right up and restored from a backup with no issue... so I wasn't worried about this. I waited to make sure that I had the most recent backup (and needed to use my computer for law school for a couple days), so I turned it in a day later immediately after a complete incremental backup via TM on my TC.
-Got my computer back from the Apple "depot" with new hard drive and hard drive cable.
-Had an extremely hard time getting my TC to link to my computer and via AppleCare phone help, realized that Apple had given me back my computer with Leopard, and they said that I needed to go back to the store to get a Lion reinstall since the backups had been done in Lion.
-Went back to Apple store, reinstalled Lion... they told me there would be no issue once I got home and hooked up to TC. Connected to TC via ethernet and went through "set up" procedure as if it was new computer - could never get past the "Select the Disk" page. Either it was beach-balling or just sitting there, and I couldn't click continue or anything.
-Called AppleCare again, they said to try it through Migration Assistant instead of Set Up... again, could not connect to TC. They said it was too complicated to do over the phone and sent me back to the store...
-By now, I am on vacation and spent 5, yes FIVE, hours at another store trying to migrate the data to no avail. I obviously don't know everything they tried, but I know they tried installing each operating system since Leopard, going through set up and migration assistant, and doing a disk repair of the TC. None of this worked. Every single time my TC connects and you can see the title of the drive ("Data") and the two separate backups ("emilysmac" was my old computer and "emilysmacbookpro" was the dummy one we tried to make). Emilysmacbookpro was accessible with no data on it, but once we clicked on emilysmac it just said "connecting" forever and never did anything.
Basically:
-300GB of my TC shows that it has been used, so I know something is there.
-I can also pull up the data on another computer, and it shows files dated from September 2009 up to the date I last updated, but they do not look how they used to - they are "Unix Executable" files and cannot open through Time Machine.
I have a really hard time thinking that my TC AND my computer hard drive failed at the same time - which is actually what Apple suggested to me. Is there anything that anyone knows that will help?! I am desperate here! This TC had backups of all my music, pictures and law school work over the past 2.5 years. Any help would be much appreciated!

PS I have also looked through Pondini's site, but I am not sure if I am missing something since I don't totally understand all of it. Thanks again!

Help! Still get error message after installing new hard drive

The original problem is below and thought that it would help to include it to see the initial problem.
I went out and bought a new hard drive (500gb) and installed it in my laptop. I went to use the restore disks and I got the same exact error mentioned below. I used a set of disks that I copied from the original recovery disk and it still did the same. What is the error code and how can I fix this!!
Please help!!
I have a Satellite A215-S7444 laptop and everytime I go to restore the drive to it's factory settings using the Toshiba recovery wizard I get the following error: ERROR: 03-EEEE-000, AN ERROR HAS OCCURRED, PRESS [OK] TO TURN OFF COMPUTER.
Just a note, I have used my recovery disks to restore the factory settings before with no problems at all, now I get this message. All the files are accesible on the CD and I have no virus' on my computer.
Lastly, the image part of the drive (The one that is like 1.5 gb) which is usually visible is not any more and has not been for a bit when you should see it when you open "My computer". You can however see it when I go to "Administrative Tools-Computer Management." It states that the drive is Healthy (EISA Configuration), type is basic, and there is no file system associated with the drive and there is no drive letter for it either.

Thanks for your quick reply! I was wondering if anyone would reply!
I made the copies on a suggetion that the original may be scratched or something so I figured what the heck? I did format the hard drive though. It is a Seagate 500gb hard drive. I only formatted the whole drive and figured that the restore disks would make the additional partition.
Aside from that, it's the same error message that I had on the original drive. The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean. What can be causing the error message, and what IS the error message?
Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
Thanks again for replying!

HT1386 I have had to have a new hard drive fitted to my Apple Mac and now I can't sync my music with my iPhone, it thinks it's a new computer. Please help, What do I do?

I have had to have a new hard drive fitted and now I cannot sync my Iphone with my Apple Mac, thinks it's a new computer. Any ideas Please?
Alan C

I keep this as a copy and paste. It's the same process for Mac as it is for a PC. Read it over and see what you think. Post back if you have questions.
The following was copied from this thread. This is essentially what you want to accomplish.
https://discussions.apple.com/message/11527071#11527071
1) Without connecting your iPad to your laptop, start iTunes. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your Mac and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on iTunes / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
Read this thread and the support links as well. There are apps that you can purchase that will allow you to transfer photos from the iPad to your PC. Look at Photo Transfer App in the App store and you can search for others as well.
https://discussions.apple.com/message/13016026#13016026
This support site will help you with transferring iTunes music to your new computer.
http://support.apple.com/kb/HT4527

HT1329 Hi All - My hard drive failed and I am trying to move all my music from my ipod to the new hard drive. I am operating on Win 7 64 bit. Can anyone help please?

Hi All,
My hard drive crashed and is no longer usable. I just installed a new drive however, I am not finding any way to export my recorded CD's from the Ipod touch to the new hard drive. Can anyone help please? I thought by enabling syc with Ipod woudl do it but to no avail.
Thanks

I used a 3rd party program called copytrans http://www.copytrans.net/ that is not free to move my library from my ipod to my itunes library when I had to start from scratch. After that happened I started backing up my music that purchased from the itunes store to a dvd so I would always have it if things went south. Now I always backup my purchased digital music to an optical disc just in case plus everythng else I have is on retail cd's so I can just rebuild my library from scratch again if I have to. You should also regularly back up your itunes media folder to another disc so your entire library will be backed up just in case you should lose your program drive.

I have installed new hard drive to iMac intel 2007 model and all I get on the screen is a grey question mark, tried system disk and now that's stuck in drive and just spinning around, any help please

Sorry put all question on subject line. As I said fitted new hard drive, but all I get is a folder with a flashing grey question mark. Tried system disk but that is now just spinning around in DVD drive and I can't get it out. Any help with these problems would help

Sounds like the new drive is not being recognized. Could be it's a SATA3 drive with a 6Gb/s transfer rate and needs to be jumpered down to 3. But if the 2007 is 1.5, it may not work at all, even if jumpered down. Other possibility is a not properly secured cable or a cable that's come loose from the logic board.
What is the model of the 2007 Mac? What's the new drive? Did you do the installation or was it done by a shop?
You can find your model here. Look next to Standard Hard Drive:
http://www.everymac.com/systems/apple/imac/index-imac.html
Message was edited by: WZZZ

AGP new hard drive help

Similar Messages

Maybe you are looking for