Agp/pci clock locking help please

i have the 865pe neo, using patriot memory with winbond 5ns chip, have no problem running at 250mhz in corecenter, however when i try to o/c in bios, when with the agp/pci clock locked, i can still it increasing up to 80mhz/xxxmhz as i increase the front bus speed of the cpu, anyone having the same problem with this board? will new bios fix this? by the way , i can't manually change the agp/pci clock , it's grayed out and "locked" this ths only option available under "apg/pci clock" there's no manual setting, soeone please help i can bring this board back to get the 875p if thats needed
thanks fo ryou help

Hi tgn,
MSI have this feature locked to prevent us from o/c the CPU multipiler settings. Can't say that whether this is good or bad for o/clockers like us. Unlike Abit which unlocks everything, MSI keep settings to what the mobo detects the CPU model is, i.e, if you're running a P4 2.4, then your Multipiler settings will be 18x with 133 FSB x 4 to make 2400+- MHz, try calculating the mathematics way and you'll know how far you can o/c to.
Corecenter o/cing is another way MSI sets as it will directly show you the speed your CPU is running at vs the multipiler settings.
All the Best... :D!!!

Similar Messages

MSI Pro2-C (6562) - How to lock AGP/PCI clock ?

hi,
I use the BIOS 1.1 with this card, and can't lock the AGP/PCI Clock (66/33)
Is there an utility which can do that, or is it possible with the BIOS 1.2 ?
thx

-> LINK to the MB specifications.
MSI Pro2-C / MS-6562_i845
With this bios (1.1), I can't lock the agp/pci clock to 66.66/33.33 and when the FSB is about 105, pci extensions are out.
So, I would like to know if it's possible to lock agp/pci clock with the BIOS 1.2 (or maybe another bios), or if it's possible to do that with software (and if yes, which software)
CPU is p4 willamette 1.7 (17*100) and I think it would be possible to reach a fsb around 120 (@2040 Mhz) if I can lock agp/pci clock.
thanks for your help
and sorry for my english, i'm french

Lock agp/pci clock with software

hi,
I have a MSI pro2-C (MS-6562 100 rev0.4) and can't lock the agp/pci clock with bios.
Do you know a software which do that ?
thx
winxp sp2
pentium4 1.7 willamette

-> LINK to the MB specifications.
MSI Pro2-C / MS-6562_i845
With this bios (1.1), I can't lock the agp/pci clock to 66.66/33.33 and when the FSB is about 105, pci extensions are out.
So, I would like to know if it's possible to lock agp/pci clock with the BIOS 1.2 (or maybe another bios), or if it's possible to do that with software (and if yes, which software)
CPU is p4 willamette 1.7 (17*100) and I think it would be possible to reach a fsb around 120 (@2040 Mhz) if I can lock agp/pci clock.
thanks for your help
and sorry for my english, i'm french

Agp/pci frequency lock at 33 mhz ??

how can i lock the agp/pci frequency at 33 mhz when i overclock p4 1.8a to 2.4 at fsb=133 and vcore at 1.425.... because windows xp can't start up . it keeps rebooting the pc ,,, please help
i have msi 645 ultra ddr333 ms-6547 mobo

That board and chip really only supports 100fsb :D
anything over and its overclocked!!!!! ;(
there is no stuff in tha bios to lock agp or pci ;(
Most people think overclocking is ok ?( Just buy faster next Time 8o 8o

Cannot install lion. "The Disk is Locked" help please!

I was hoping someone could help me. I just downloaded the Mac OS X Lion and when trying to install, it says there is an error with the disk and that it is locked and cannot install. Does someone know how I can fix this? Now I am also worried that I have lost my files. PLEASE HELP! Thank you!

Try to Repair it, per #6 in Using Disk Utility.
If it's still locked, this might help: https://discussions.apple.com/message/11044944?messageID=11044944#11044944?messa geID=11044944

Mac with boot camp. i got problem with the clock .. help please ..

hi. im using macbook pro. my mac hav been install with boot camp. so now i run two operating system. mac n windows 7 (64 bits) but i can set my clock time correctly for both my OS.. how can i solved this .? i hav doing google search about this... but i found nothing.. can sumone help me

Your OSX psrtition and your Boot Camp partition are completely separate. You can reinstall Mavericks without affecting Boot Camp and you can redo Boot Camp without affacting OSX.

My Powerbook sounds like a clock! Help please.

A few hours ago my Powerbook started clicking like a clock. About every second it clicks. The sound is coming from the rear of the unit, or the rear left, or the bar that connects the main unit to the display; it's hard to tell. It's pretty loud too.
What's going on?
It can't be dying! I have an interview tomorrow and need to finish my presentation.
Thanks for any help.

BACK UP YOUR DATA NOW!!!
Ok, now that your done backing up trying running the hardware diagnositc utility that is found on one of the discs that come with the computer. Also if you can tell us when the clicking started what was happening with the computer or if you can cause the clicking to start or stop (determine causality)

Creative sb audio pci (wdm) --need help please-

guys i need that driver for windows 7 32bit
thanks

Check your software (eg WinDVD) that comes bundle with your soundcard for option such as dolby prologic II or any upmix feature. This function will channel stereo source to all yr speaker.
If still cannot, maybe u should try a simple diagnostic method. Try connecting the rear speakers to the front channel of yr soundcard. Test for sound from yr rear speaker. If there is sound, that means yr speaker is ok, problem may be due to yr software or soundcard. Likewise do the same testing method on yr front/sub speaker.
U can also try playing DVD to test for 5.1 channel output. However, make sure your software have the dolby digital(AC3) or DTS decoding function. From what i know, winDVD and PowerDVD(cinema) have this function.
Hope this can help.

HT201210 i have forgotten my password now my phone is locked,,help please

i have forgotten the password formy iphone 4 and amnowlocked out of it,any ideas if restore is not working through i tunes?

IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
Please get the iPhone iOS 4 user guide.
Please Get the iPhone User Manual for iOS 5

IPHONE 4 LOCKED HELP PLEASE

If I buy an Iphone 4 and its locked by carrier is it still possible to listen to music,connect to wifi,buy and play apps,watch videos facte time etc
PLZ HELP

yeah it will be 100% like an ipod touch then apart from being fatter and more expensive

MSI 280X Voltage Locked - Help Please

hi guys
I purchased an MSI 280X Gaming OC GFX and would like to undervolt it
I read on forums to try this bios: techpowerup.com/vgabios/146769/msi-r9280x-3072-131009.html
which i did with ATIflash in DOS, i switched to position 2 on the small switch (switch left direction to back of case), it flashed and said successful but when i boot its just a black screen and no output
when i put the switch back to position 1 (switch right direction to front of case) it works fine with the original bios (015.042.000.003.000000 )
any ideas why i cant boot from switch position 2 with an older bios? is my card faulty?
my card s/n is: 602-v277-44sb13121xxxx
my aim is to flash an older bios so i can get voltage control in After Burner
many thanks!

Quote from: flobelix on 26-January-14, 08:25:56
Don't know. Ask MSI: >>How to contact MSI.<<
There is nother vbios supporting more features than current vbios TV277MH.380 you provided. To have backup simply flash it on the bricked one. If you can boot your system with onboard/integrated gpu or you have an old spare vga for display boot with the R9 280x switched to the bricked vbios and flash the vbios with your saved one.
That's great. Do you a link to this other vbios please?

K8T Neo AGP/PCI lock - never here?

Anandtech states on their review:
"We contacted MSI, who told us this will be included in an upcoming BIOS upgrade."
Have we ever seen this AGP/PCI clock lock?

Via themselves reported that in the K8T chipset they could not get it to work. That is why they built the K8T pro chipset. The Neo systems with the original K8T chipsets can not nor ever will have PCI/AGP lock.

PT880 and AGP/PCI Lock---is this it??

Have visited Viarenea and others----supposedly Via has instituted an AGP/PCI Lock for the first time on their chipsets and the PT880 board is the first to have it.
I found this in the Manual----Frequency/Voltage controls in Bios:
Page 3-28
AGP Frequency
This item is used to configure the AGP frequency. Settings: From 66.9 to
100.9 at 1 increment.
Am not sure----but I believe this setting to be the long absent AGP/PCI lock setting that Via was notorious for NOT having----but supposedly fixed with this chipset.
This sounds very similar to Bios settings on various NForce2 boards that DOES lock the AGP/PCI bus
Anybody know anything about this?
Basically, an AGP/PCI lock is ESSENTIAL for any kind of serious overclocks.
Thanks----John

You are Absolutely Correct "johnrr6", This is VIA's new AGP/PCI Bus Lock/Divider .....And it is About Time!!!..........Sean REILLY875

Do k8t neo fis2r have agp/pci lock?

Hi
I just read a test of my motherboard (MSI k8t neo fis2r).
I was written that the motherboard had a agp/pci lock.
Does it so? I dont want to damage my 9800xt with to high agp bus so i need to know! please

Simple fix... Don't overclock the system clock or what people mistakenly reffer to as the Front Side Bus (FSB)... The issue is not just with the motherboard but rather with the VIA K8T-800 chipset. The Hyperthreading, PCIO, and AGP are all tied to the system clock so when you change that clock everything is affected. Some things can handle it and some things can't. If you leave the system clock alone then there are no worries.

AGP/PCI Lock

I just wanted to know if there is a working agp/pci lock for the K9t NEO-fis2r out yet. If not, does anyone know when this might be included in a bios revision, or is it just a pipe dream?
Any help would be greatly appreciated!
Thanks

k9t should be k8t sorry hehe

Agp/pci clock locking help please

Similar Messages

Maybe you are looking for