AGP problems with FX 5600 256

Help,
        I bought my VTD FX5600 card with 256mb ddr ram about 2 months ago and I noticed it's not running in AGP mode.  I know it's an AGP card but when I run dxdiag it says "AGP Texture Acceleration: Not Available" and when I installed the specail MSI driver for it, I cant check the little box for 8x AGP mode.  I do have a motherboard that supports 8x and the card does so i dont know whats wrong.  Any help would be great.

here are some more screenshots that say it's not an agp card but i promise it is.
the pictures work but you may have to type in the adress in your browser.. dunno whats wrong with em

Similar Messages

  • MOVED: [Athlon64] AGP problem with my new MSI K8N NEO4-F

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] AGP problem with my new MSI K8N NEO4-F

    Yes I managed exactly that. I've been out of the computer building business for a while so I didn't know the graphics ports had changed.
    I will invest in a graphic card as well, thanks for putting me on track 
    (The manual sais something about the port supporting 8x agp though? )

  • [Athlon64] AGP problem with my new MSI K8N NEO4-F

    Hey!
    Just bought a MSI K8N NEO4-F and got a serious problem with the AGP port, the graphics card wont work!
    When I install my radeon 9700 pro I can't get a picture, everything else works including a pci graphics card.
    I don't have a diskette drive so I haven't upgraded the bios yet, but I find it hard to belive that you have to upgrade to get a picture.

    Yes I managed exactly that. I've been out of the computer building business for a while so I didn't know the graphics ports had changed.
    I will invest in a graphic card as well, thanks for putting me on track 
    (The manual sais something about the port supporting 8x agp though? )

  • Seriuos problem with FX 5600

    hi...recently got an FX5600XT-VTDR128 and it was ok but in capturing.....i was surprised to see the large number of dropped frames when capturing using vertual dub.....i use 25 frames per second and tried diffrent frame rates but still same problem.(frames dropped over 200 frame per minute)
    my computer is P3 1.2GHZ with 256 SDRAM.....is that a problem to capture without dropping any frames......pls advice.
    thank u.

    thank u for yr advice......will upgrade soon....

  • G4 AGP, problems with Graphic Cards and booting from Install DVD

    I bought a G4 AGP (with DVD) on Ebay. It has Mac OS9.2 installed and its working correctly so far. It has an additional GraphicsCard in a PCI Slot, on which the Monitor is connected.
    1. The AGP Card doesn't give any output signal... I wondered if this would be the reason that somebody installed the additional Card...
    2. The AGP Card doens't show up in the Profiler... is this normal? According to other users this seems to be a common issue...
    3. I would like to install X 10.4, but when booting from CD, the process stops after a few seconds... and there is no signal on none of the video cards. I tried to remove one or the other card but no luck...
    the firmware is uptodate and the Install DVD is correct aswell, I just bought it from AppleStore...
    I don't have any original CDs available, so I cant run a hardware test.
    Anybody?
    G4 AGP   Mac OS 9.2.x  

    The AGP Card doesn't give any output signal... I wondered if this would be the reason that somebody installed the additional Card...
    Probably. I'd take out the bad original card and replace it with the additional card. Then, check and see if that's what caused the problem. Then only other choice is to take it to the Apple store and have them check it out.
    I don't have any original CDs available, so I cant run a hardware test.
    You can either contact the seller and complain about the missing disks or buy replacement disks for your machine. Give 1-800-MY-APPLE a call. The AHT disk should cost about $20. I don't know what the others would run.

  • Problem with X11 running 256 colors finally SOLVED!

    Good morning all.
    Last August I posted thread regarding X11 not working with 256 colors.
    http://discussions.apple.com/thread.jspa?messageID=2161056

    Apple did it in the 10.4.9 update, but that slipped by me until I saw this post (so thanks!!!)

  • MS6398 AGP problem

    Trying to install new 845 Ultra board in existing system. Have old Viper V770U AGP video card. Board will not boot. Tried newer GeForce 440 AGP card. Same thing. Currently have old PCI card and at least it boots. Not sure which voltage the AGP cards are. (How can you tell?). Board's BIOS is at v 3.0 out of the box. Haven't run LiveUpdate yet. Are there any reports of AGP problems with these cards?

    Thank you very much for your help. I have already tried everything that you write. I have reinstalled windows many times and put my computer completely apart and put it togheter again pice by piece but with no luck.
    The guide that the error meassage refer to did not follow with the card but I have read ATI`s guides on theyre homepage. http://www.ati.com/support/manualpdf/Getting_Startedx800.pdf
    I have read the manuals many times and done everything. It was only one thing that was written that was new to me and that was a little pin/or jumper or so on the back of the card. It was for changing between pal and ntsc. I have tried every combinations but with no luck.
    Now I am using a completly clean windows installation, but all the software based issues are not related to the fact that the PC will just not boot with the card installed. I have even cleaned all the new cables and taken away dust and so on. I am 23 years old now and have had computers  since  I was 10 years old(I guess 10 or 15 differnt) but never had any trouble that I could not solve. This hover I find strange. I will ship the card back to the reseller in one day or to.
    I am lucky that a norwegian law grants me all the money back (about 400 US dollars) in 2 weeks after buy no matter what the reason is. I only have to pay for shipping.

  • Problem with I-trigue 5600 . Please help!

    hi,
    My I-trigue 5600 worked perfectly for over 4 years. Buy recently, my rear right channel stoped working I 've tried everything : all satellites work poperly,drivers are ok, I tested it on 2 computers. There is still the same problem. Unfortunately Creative dosn't have after-guarantee service.. So, I tried to open subwoofer, but the inerity is too complicated with many areas flooded with glue or isolation. I tried also to buy another subwoofer / i believe it must have small damage , but the rest of speakers work great and the voice of subwoofer is good as well/ but there is problem with buying a subwoofer separately. Becouse there are only auctions on net.
    So , what I supposed to do? Does Creative have separated spare parts to my subwoofer? Can I buy another subwoofer anywhere?
    Can I replace my sub to similar from another speakers system and which one would be suitable.
    I don't want to change my speakers. They are the best for me, but defect of one chanell is annoying. Really.
    I wanted to buy x-fi elite pro ,but now it's pointless.
    Please help me
    Despere Makary

    Hey! I've got the same problem with the same kind of speakers! When im listening to something volume is coming down and after a some time its coming back to its previous level! Coming back to its normal level can be forced by turning the speakers on and off! thats all i've discovered...
    i also heard that some of creative speakers have kind of (f**k i dont know the word in english :P ) which works like that: when subwoofer is hot it automatially turns the volume lower to save your speakers from burning form hot :P or something like this :P
    hmm... what i discovered that is no matter what i connect as source of music! effect of volume is the same
    or maby you discovered the reason of this?
    ps.
    sory for my very unperfect english...

  • MSI FX5600XT problems with agp 4x and other stuff

    Well
    I just bought myself a MSI FX5600XT-TD128
    I had a Hercules (guillemot) GEFORCE2 PRO (clock higher than GTS and slower than Ultra).
    I'm not sure if my previous videocard (the gf2pro) would run stable @ 4x or run @ 4x at all.. I know my motherboard is capable of agp 4x, the old videocard I am not sure it was..
    WEll, I bought the msi, plugged in and no post.
    so I take the card out, put it back in, posted... 5mins later, crash..
    No post..
    So I put the old videocard in (gf2pro) and disable agp4x in the bios, plug the msi back in and running so far stable...
    My motherboard is an IWILL KK266 (via kt133a).. very nice motherboard running on a not-so-compatible-with-it athlon xp 1600+ (1.4ghz)
    The mobo problems with the cpu (processor) are limited to having to press 'reset' switch to boot (or else pc will power up but no boot).
    Well my question is, is the agp 4x problem related to this msi video card in general, or to a faulty video card I *might* have (so I can exchange this one) or is it related to the motherboard???
    Also, can someone explain to me the diferences between FX5600, FX5600XT AND FX5600 ULTRA?
    Also, explain to me please the 'V,T,D,R' models differences too?
    And Last but not least, what is the best driver for the fx5600xt and winxp??
    I'm running msi latest (53.03, I installed it just to test em), I had nvidia's 52.16 prior to that.
    Thanks for all ur help

    Quote
    The mobo problems with the cpu (processor) are limited to having to press 'reset' switch to boot (or else pc will power up but no boot).
    This can also be from a weak PSU, which would be even further taxed by adding the power hungry FX card.
    Might need a stronger PSU.

  • Some problem with my FX 5600 256MB VTDR

    hi i have samo problem with my new vga card ;
    1) media centre deluxe 2 runtime problem! i have fly video Tv card and mediadc 2 is crashing because of the fly video driver! ( my opinion!) Is there any driver that can run both Fly Video and MDC 2 with no problems!
    2) after installing the nvidia certificated driver , 45.23, msi clock settings doesn't work! it is run only with 44.03 drive.
    3) when i set antialiasing mode more than 4x, my sistem is restarted while i am playing game!
    how can i solve those problems??
    there is no overclock
    MSI 865pe neo2 -s Mobo
    p4 2.4 (533mhz 512kb cache) & 2.43Mhz
    1*256Mb kingstone memory 2.5,3,3,8
    MSI geforce Fx 5600 vtdr 256Mb
    Fly Video Tv card
    nvida 44.03 detenator driver
    windows Xp prof
    seagate 40gb ata IV
    430W everest power sup.
    +3.3V=3.25
    +5.0= 5.05
    +12= 12.10
    vcore=1.55

    DMA 02                     Exclusive      Standart disket denetleyicisi (floppy controller)
        DMA 03                     Exclusive      ECP Yaz1c1 Balant1 Noktas1 (LPT1)
        DMA 04                     Exclusive      Dorudan Bellek Eri_imi (memory) Denetleyicisi
        IRQ 00                     Exclusive      Sistem Saati (System Clock)
        IRQ 01                     Exclusive      Standard 101/102Tu_lu ya da Microsoft Natural PS/2 Klavye
        IRQ 03                     Exclusive      0leti_im Balant1 Noktas1 (COM2)
        IRQ 04                     Exclusive      0leti_im Balant1 Noktas1 (COM1)
        IRQ 06                     Exclusive      Standart disket(floppy) denetleyicisi
        IRQ 08                     Exclusive      Sistem CMOS/Gerçek Zaman Saati
        IRQ 0A                     Shared         Universal Serial Bus (USB) Denetleyicisi
        IRQ 0B                     Shared         Intel(R) 82801EB SMBus Controller - 24D3
        IRQ 0C                     Exclusive      PS/2 Uyumlu Fare
        IRQ 0D                     Exclusive      Say1sal Veri 0_lemcisi
        IRQ 0E                     Exclusive      BirinciI IDE Kanal1
        IRQ 0F                     Exclusive      0kincil IDE Kanal1
        IRQ 10                     Shared         Intel(R) 82801EB USB Universal Host Controller - 24D2
        IRQ 10                     Shared         Intel(R) 82801EB USB Universal Host Controller - 24DE
        IRQ 10                     Shared         NVIDIA GeForce FX 5600
        IRQ 11                     Shared         C-Media AC97 Audio Device
        IRQ 12                     Shared         Studio WDM Video Capture
        IRQ 12                     Shared         Intel(R) 82801EB USB Universal Host Controller - 24D7
        IRQ 13                     Shared         INCA SoftK56 Data Fax Voice Speakerphone CARP
        IRQ 13                     Shared         Intel(R) 82801EB USB Universal Host Controller - 24D4
        IRQ 14                     Shared         Microsoft ACPI-Uyumlu Sistem
    ok!
     here is irq sources!

  • Major problems with Creative Nomad MuVo NX (256 MB)

    Hello, I recently brought a Creative Nomad MuVo NX (256 MB) it hasn?t been more than two months and I?m already having problems with the MP3 player. This is a little hard to explain but, the headphone jack (where the headphones connect to the player) whenever it moves (to the left, right, up, or down) the sound dies, or gets very staticy. There is no way I can play music this way, as the connection moves a lot. Is there anyways I can fix this? I hear that Creative will replace my product if it'ss withen 90 days. I also have proof of purchase, and original retail box materials.

    obiant, this has been a problem frequently with some older models of the Zen Extra, although I have not heard of this in a Nomad Muvo. What happened with the Zen Extra is the headphone Jack was just soldered on to the motherboard with nothing to hold it on. After awhile the soldering job on the jack would loosen and sometimes break off. After a awhile creative then added a piece of plastic to keep the soldering from loosing. This may be you problem and if it is I?m surprised that creative would make that mistake twice. You should email Creative tech support to see what they think, they can also arrange to have the player sent to them for repairs.
    I hope you get it working or fixed.
    Email for creative tech support: http://us.creative.com/support/custs.../emailform.asp
    Torstein.
    Please help me with my post:? A Petition to ask Creative to update the firmware of the Zen Touch to Include EAX capabilities.[/b]

  • Problems with AGP and voltage

    HI i have a problem with my VGA card MSI Ge FOrce4 Ti4200 TD8X, the card is agp 8 but voltage in BIOS is 1,5V (like AGP 4). Can anybody help me????????,
    Thanks

    Don't worry about the BIOS Voltage Being 1.5 (instead of .8 for AGP 8X) as thre is no such BIOS setting for .8 Voltage ..The reason for this is that all AGP 8X Vidio Cards Reduce the Voltage from 1.5 to .8 on the Vidio Cards themselves with the Vidio Cards Own Electronics ......So do Not worry 1.5 Volts in the BIOS is the Correct Voltage for an AGP 8X Vidio Card .............Sean REILLY875

  • 6147 problem with AGP controller

    I have loaded W2000 onto a packard bell club 70 which has a MSI-6147 motherboard.
    Device manager is reporting a problem with the PCI to AGP controller, error 12, not enough resources.
    Have tried a number of forums for help (Microsoft, Packard Bell) and have been advised to update bios. I believe my current bios is V2.0, dated 08/30/1999, and cannot find a newer one available.
    Any advice on bios would help. Any advice on AGP controller problem would make my xmas.
    Thanks

    I've checked the PB site and they have a number of bios listed for club range but none match what my m/c is telling me, which is
    08/30/1999;440BX-W977-2A69KM4EC-00
    Award Modular Bios v4.51PG
    W6147P2 v2.0 083099
    Looking on the link you left me the latest bios listed is v1.8.
    Would you also recommend a bios upgrade as the likely solution to my problem or are there other known problems with W2000 on this M'board?
    Thanks

  • Help needed quick with AGP problems

    i bought a Radeon 9600 256MB vidcard from Sapphire today, and when i tried it in my K7N2 Delta ILSR, the system would boot, load windows, hang, then refuse to boot unless i removed the radeon ... since i dont have any onboard video, i've been using an Nvidia Vanta before the radeon, any ideas what the prob might be?
    help would be very much appreciated

    Quote
    Originally posted by skzillz
    where can i find the list of recommended memory modules for the Delta ILSR?
    and what are some of the recommended PSU's also plz
    thanks for ur help btw, i had solved the problem by moving the memory from one slot to another, does this give u any idea about any underlying problem with the motherboard??
    I've already given you the top 2 PSU choices, and Bonz has linked you to his sticky on RAM choices. Please read what's been given to you already. As far as RAM I would recommend a good quality Mushkin or Corsair.   Run this to test your memory Memtest
    Good Luck
    Bob

  • MSI GF 6600 AGP AND problem with clocks

    Hello,
    I've got a big problem with saving clocks in my graphic card. Neither RivaTuner nor coolbits don't work - after rebooting computer the clocks are reseted and forced to default values.
    I'm using fw 71.89 (previously 71.84).

    Winter,
    Run Driver Cleaner and get rid of all the old Drivers. Then install the latest nVidia ForceWare Drivers. From there try to set the clock speeds you want. (Make sure you set it to apply at startup.)
    Remember that there are two speeds, one for 2D and another for 3D.
    Take Care,
    Richard

Maybe you are looking for