AGP SAWTOOTH wont see more than 896mb RAM

It wont see more than 896mb of RAM in any combination of the 4 slots. And whats more, if I put four 256mb chips in, it will only see 512mb. So I currently have 3x256 and 1x128...
This is true with OS 9.1, 10.3 and 10.4...
Any ideas? thx

Hello! Have you checked to see if all the ram is the same spec. i have 4 512 meg pc133 sticks in my Sawtooth and it shows 2 gig of ram. OS 9 will only recognize 1.5 gigs as I understand it. I think that OSX has the ability to "lock out" portions of memory that may be out of spec. Tom

Similar Messages

More than 2GB RAM 1st gen Macbook

Is there any way possible to get more than 2GB RAM in a 1st gen macbook? I have one 2GB stick in right now but if I try to put even the old 512MB in the other slot I get no video. I also tried two 2GB sticks as well. I'm pretty sure the answer is no, but it doesn't hurt to ask and have hope
I have a dell inspiron with Core2 and it wouldn't see 4GBs until I pulled the battery on it. maybe there is a trick for the macbook like that?

I was hoping since it sees one 2GB stick it may like 2? It was a long shot. I just got this one used, so I'm stuck with it for a while. It runs fine with 2GB though.

Will elements 9 recognize more than 4gb ram?

why does elements 9 only show 4gb ram when my system (window 7 professional) has 12 gb & how do I get it to recognized it?
Elements Organizer 9.0.3.0
Core Version: 9.0.3 (20110328.m.11320)
Language Version: 9.0 (20100905.m.9093)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Catalog\
Catalog Size: 73.3MB
Catalog Cache Size: 627.1MB
System:
Operating System Name: 2000
Operating System Version: 6.1 Service Pack 1
System Architecture: Intel CPU Family:6 Model:14 Stepping:5 with MMX, SSE Integer, SSE FP
Built-in Memory: 4GB
Free Memory: 4GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: Not installed
Adobe Reader Version: 9.4
Adobe Acrobat Version: Not installed
CD and DVD drives:
D: (ASUS DRW-24B1ST BUS: 1 ID: 1 Firmware: 1.01)

To follow up on 99jon's post, 2 to the 32nd power is 4.3Gb. Therefore, PSE will not be able to see more than 4Gb. Win7 will do a great job of managing the installed memory, so there's nothing for you to do but relax and run your applications.
Ken
Message was edited by: photodrawken to correct typo.

Problems deploying Windows 7 x64 computers with more than 8GB RAM

SCCM 2012 R2 CU1
Windows 7 x64
We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
- we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
The error shows in 3 different ways – depending of the computer model.
1) BSOD – STOP 0x000000F4. Disk error.
2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently fail every time after the error has begun. If we reduce (remove physically)
the memory to max. 8GB of RAM, they successfully run the Task Sequence. We get the above errors on both Lenovo and HP machines with more than 8GB.
I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
error on both m93p and M83. At least not the BSOD on the M93p ;-)
Tried setting SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
the same problem.
Investigating the smsts.log on a computer with the 0x87D00269 error.
Policy Evaluation failed, hr=0x87d00269 InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
you have not previously used.
Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords. And again why only on computers with more than 8GB RAM.
Anyone else had problems rolling computers with more than 8GB og RAM?
Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
Why does it only affect machines with more than 8GB RAM?
How to get rid of the 0x87D00269 error?
Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
Any help or hints would be appreciated!
Thanks
Anders

We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
Machines with >4GB of RAM
Lenovo ThinkPad T540p failed applying drivers with 80040005
Black screen/white cursor issues intermittently
No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
Daniel Ratliff | http://www.PotentEngineer.com

How can I see more than 6 all day events in the week view without scrolling?

How can I see more than 6 all day events in the week view without scrolling? I need to see all of my all day events at once. I use this for scheduling and comparing of # invoices. Going back and forth to scroll is cumbersome. I just want to be able to expand the top section so I can see everything at once.

Any ideas, anyone?

¿How can I see more than a day in the calendar view of the notification center?

Hi guys! I wanna know if there's any option to see more than a day in the calendar view of the notication center. I swear I saw a friend of mine who could see more than a day in the notification center.
Than

In Settings > Notification Center, try turning "on" all the six buttons under "Today View". Also turn "on" the top two buttons under "Access on Lock Screen". Doing that should show you "Tomorrow" at the bottom of Noticiation Center.

Adding more than 2Gb RAM to MacBook Pro

Do you guys know of any way to put more than 2Gb RAM in an Intel 17" MacBook Pro?
Model Name: MacBook Pro 17"
Model Identifier: MacBookPro1,2
Processor Name: Intel Core Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B03
SMC Version: 1.5f10
I bought this when the 17" models first came out, and have been disappointed in it ever since (I broke my rule of NOT buying the first generation of something). As time has passed, the main problem is the 2Gb limit for RAM. That's NOWHERE near enough, and shame on Apple for that limitation. If there were some way, even a non-standard way, of adding more RAM, I could get reasonable performance from this computer. As it is, this has been a wasted $3600 investment. whew!
Any help or ideas would be appreciated. Thanks! Feel free to email bruce at dbsdesigngroup.com

That's possible...actually likely. I'd love for that to be the case because I could fix it. ::Grin:: It's been this way since I first got it. When it arrived with just 1 Gb RAM, it was virtually unusable. I have a few apps as startup items, but they're just Firefox, Entourage, iNotepad, Linotype Font Explorer (with very few fonts activated), and Stickies. That shouldn't affect things much.
My needs are to use Photoshop, Illustrator and GoLive at the same time, with MSWord, Firefox and Entourage open as well. After the first bit of usage, I end up with 4-6 pageouts and a VERY slow computer. While it's doing the pageouts (which take quite a while), or switching between apps, it's very slow. And it's also extremly slow when Spotlight is indexing, so I disabled that.
I'm just not sure what it might be...nothing in Activity Monitor seems like it would be a culprit. Even in Safe Mode the problem is very evident.
I'll keep exploring and hopefully find something that will make this machine more viable for my use. I really appreciate the input greatly.

If my Mini is running 64 bit can I run more than 4Gb RAM?

I hear ALL over the place that the mini can not use more than 4Gb RAM.
Is this a hardware limitaion of the motherboard/Processor?
OR
Is this due to the fact that mini's run at 32 bit?
You can now easily run modern mini's at 64 bit:
http://blog.leanopen.nl/2010/04/23/doesnt-your-mac-mini-want-to-boot-in-64-bit/
So who knows the REAL answer?
Thanks -
skibum

Most of the Minis are limited to less than 4GB and that is a hardware limitation. The newest Mini with the nVidia video can access more. Apple only supports 4GB because they use matched DIMMs, which on paper have a slight performance improvement over unmatched DIMMs. For whatever reason, Apple doesn't yet support 4GB DIMMs in the Mini. (I suspect that the power requirements or prices for the larger DIMMS may have affected Apple's decision.)
If you do have an appropriate Mini, then you can get compatible 4GB DIMMs from [Macsales|http://eshop.macsales.com/shop/mac-mini> or others. Regardless, although I normally trust Macsales, more than 4GB is not supported by Apple, so you have to take that in to consideration. (i.e.: warranty from Apple or Applecare.)

Is there a way that I can see more than just the next slide in Presentation mode (as an old version of PowerPoint used to do)?

Is there a way that I can see more than just the next slide in Presentation mode (as an old version of PowerPoint used to do)?

Sorry - should have been more specific. As far as I can see, Keynote will only allow me to see the current slide and the next slide on my laptop when I am presenting a slideshow through a projector. But an old version of PowerPoint allowed me to show the current slide....and (adjustable) many more slides ahead (say 10)....so I could simply jump ahead to a 'future' slide and skip several slides in between. Net result being that I was able to matcgh my slides to group discussions rather than stick to a fixed, predetermined slide show.
As much as it pains me, without this facility - PowerPoint (old verson, not current one) is more useful for me! :-((

9.3.1- Not able to see more than 1 errors in application.log file

Hi,
In 9.3.1. version, I am not able to see more than 1 errors in application.log file during dataload without rules files.
If anybody has faced this solution, pls let me know the cause.
Thanks
jazz

Hey Jazz,
in the first row add a rule file with no load file change the path to what you want. then insert a new row add your load file here. it should have the path from the previous row in the error file. Then delete the first row and run. I had to do this for a level zero load and was the only thing I could figure out so far

Music wont play more than a few seconds on some songs

Some of my songs wont play more than a few seconds and some only 30 seconds when i play in WMP they play fine
Purchased at amazon.com
i have tried deleting and re adding file plays in windows media player fully

problem solved Re downloaded fresh files

Why I can't see more than 10 emails at a time

does anyone know why I can't see more than 10 emails at a time?

No idea. It may be a limitation of your email provider. If you go to Settings/mail,contacts,calendar and scroll down to mail there is a setting for the number of messages to show, but the smallest number is 50.
But then again, I'm not sure what you mean by seeing more than 10 at a time. The screen only holds 9 if preview is off, and less if preview is on; you would need a bigger screen to see more.

Could not see more than 1 complex type

Hi ,
I am trying to save data entered in a datagrid by a
webservice call .
I need to send the data (in the dta grid) as a request to the
webservice ,
I will explain how my request object (requestObj) will be(at
the time of sending the request)--
there are three complex levels of data(in xml format)---
first level has the "objA" which is a collection of
"objB"(objects)
"objB" - inturn is a collection of "values".
I have all this data (objA-objB-values) in the requestObj
(finally) , I need to send this requestObj as a request to the
webservice.
The problem is I am not able to find if I am able tosend the
data properly in the requestObj .
Wen I try to check in the debug mode (Flex Builder 3) I could
not see more than 1 complex level that is Iam able to just see the
data in the objA (I need to know if I am able to send the data
properly in the request ).
The data in the objB and values appear to be null (But when I
see the dataProvider of the dtagrid I can see all the data)
2.I even tried to "trace()" the data but as all the data is
in objects I am not able to view the data.
I am trying to resolve this from quite a long time.
Can any one help me out
thanks
Nash

"nash99" <[email protected]> wrote in
message
news:g8a9au$4pd$[email protected]..
> Hi ,
> I am trying to save data entered in a datagrid by a
webservice call .
> I need to send the data (in the dta grid) as a request
to the webservice ,
> I will explain how my request object (requestObj) will
be(at the time of
> sending the request)--
> there are three complex levels of data(in xml format)---
> first level has the "objA" which is a collection of
"objB"(objects)
> "objB" - inturn is a collection of "values".
> I have all this data (objA-objB-values) in the
requestObj (finally) , I
> need
> to send this requestObj as a request to the webservice.
>
> The problem is I am not able to find if I am able tosend
the data properly
> in
> the requestObj .
> Wen I try to check in the debug mode (Flex Builder 3) I
could not see more
> than 1 complex level that is Iam able to just see the
data in the objA (I
> need
> to know if I am able to send the data properly in the
request ).
> The data in the objB and values appear to be null (But
when I see the
> dataProvider of the dtagrid I can see all the data)
>
> 2.I even tried to "trace()" the data but as all the data
is in objects I
> am
> not able to view the data.
>
> I am trying to resolve this from quite a long time.
> Can any one help me out
try trace(thedata.toXMLString())
HTH;
Amy

Why I cannot see more than 200 e-mails

Why I cannot see more than 200 e-mails at my iPad

Thank you King_Penguin. I found. I have multiple e-mail accounts. I can see Load More Messages only when I clik All Accounts. When I go to particularq, let say, Gmail account, I do not see Load More Messages.This mean that I must download more messages from all accounts, even if I need only more messages from particular account. But anyway it is helpfull.
Thanks again
Drazen

Is there any way to see more than the latest three back ups when restoring from iCloud?

I have had my phone set as icloud back up only for a couple months now and it had been backing up fine. But my wifi shut down on the phone and I couldn't back it up via iCloud. (I thought) I backed it up through my computer before taking the phone to the Genius Bar but it didn't work for some reason. And now I lost all my photos that were taken between the time that I had the wifi and when I got the phone replaced. However, I backed up the new phone via iCloud afterwards, with the phone restored to the time before i switched to iCloud backup. And I'm not a 100% sure but I'm sure it's backed up more than 3 times since I got the phone replaced. Is there any way to pick from the past iCloud backups, further back than the latest three?

Welcome to the Apple Community.
I don't believe you can see more than three, unfortunately.

AGP SAWTOOTH wont see more than 896mb RAM

Similar Messages

Maybe you are looking for