AGPGART, SiS-AGP, Nvidia = Computer Lock

Whenever i have agpgart loaded as a module with sis-agp and nvidia driver set and i startx the computer freezes.. When i use nv it doesnt.. How to solve?

There are several things you can try. The "easiest" would be to change the AGP rate you are currently using, from 8x to 4x or even 2x. The README file NVIDIA supplies gives instructions on how to do that, while using the kernel agpgart, not NVIDIA(s) since the 760 is not supported at this time like you say.
If that doesn't work, try changing the AGP rate in your BIOS.
If that fails, can you change the "AGP drive strength" in your BIOS? Apparently, settings of "0xEA and 0xEE" on VIA based motherboards seem to work best (str8 from the README).
If you're still intent on using the 6629 driver, try recompiling the kernel without the framebuffer entirely. Turn it off.
Outside of that, I've ran across many an SiS related problem on the NVIDIA forums. Some have had good luck by using a driver version before 6106. Try grabbing an older NVIDIA driver and see if that helps. All the newer NVIDIA versions rarely provide any performance gain at all, but are mainly targeted at the newer NVIDIA GPUs. If you're using an older FX or even MX chipset, you won't gain anything from the newer NVIDIA drivers anyway. On my Ti-4600, I've yet to see any performance gain from 4191.

Similar Messages

MSI 648F NEO SiS AGP trouble/wont detect nvidia FX5200

Hi!
I recently did an emergency build using the 648F Neo (my old syntax board died). Everything went well, but when I went online I noticed my graphics were very choppy. I checked my Display settings and noticed that my nvidia fx5200 wasn't even being recognized!
I went to the Device Manager, and saw that the 5200 wasnt listed their, either. However, I did notice that under "System Devices" there was a listing for "SiS Accelerated Graphics Port", and this listing had the yellow-dot-with-an-exclamation-point warning attached to it. However, when I right clicked on it, and checked the driver, it listed the driver as "5.1.2600.2180" , with a driver date of "12/9/2004". I used the driver off the Cd, and off the MSI website, but with no different result.
The device manager also provides me with this info: "This device cannot start. (Code 10)".
When I try to download the nvidia driver, it informs that it could not detect any drivers that are compatible with my current hardware.
Any suggestions?

Here's where we stand:
I got rid of of the drivers i had installed, both AGP and Nvidia.
I started in safe mode, and reinstalled SiS AGP driver ver. 1.21
I then tried to install the nivida drivers.
Same result: "could not find drivers compatible with hardware" etc.,
My device driver screen shows that the Sis Accelerated Graphics Port fails to start ANYTIME I have 1.21 loaded up. Should I try an older version? Even if i dont try to install the nvidia drivers, I still get the exclamation point warning that the SiS AGP failed to start.

SiS AGP drivers with 648 MAX-F and TI-4600 GS

A few days ago I bought a new computer. Here are the specs:
Compucas 6A21B 300W SuperLowNoise
Intel Pentium 4 Northwood 2,4GHz
MSI 648 MAX-F
Kingston 512Mb 333Mhz DDR
Seagate Barracuda ATA V 80Gt 7200rpm
Gainward Geforce4 Ti4600 ultra/750 XP golden sample
windows 2000
I have tried everything to get the SiS AGP drivers work. Every time I start with them I get a white screen with colourful horizontal lines. There is also gray at the bottom of my screen. This picture comes after the windows screen, when it should say preparing network connections and everything. I have service pack 3 and DirectX 9. I have tried many different versions of the drivers from both MSI and Gainward/NVidia. I even upgraded my BIOS. From bios I have tried all the DRAM timing things. Now I have a nice set of drivers on my computer. Is there anything else to do than wait for new drivers? It works fine after I uninstall the AGP drivers. Does the operating system matter?

Did you try the newest drivers from Nvidia's website?
Did you try video card in another system when you had it in the shop, and another video card in your system? I take it you did a clean install of Windows XP. Mine has had no problems in WindowsXP, It's a Chaintech Ti4600. While I do have Windows 2000, I haven't used it on this system so I'm no help there. Also did you try setting BIOS to default settings? Come to think of it, I think it defaults to graphics card in PCI slot, maybe I'm thinking of another board. Don't know if that would make a difference anyway. Can you go into safemode and update or remove the agp drivers and start over? Is this fun or what? Did the AGP drivers you installed, create a Sis agp utility folder in the start menu? That might give you some information about any possible problems. What are the agp voltage readings in the BIOS?
Oops! Checked my BIOS, there is no setting for graphics card in PCI slot. Way too many motherboards. I'd try re-installing XP from scratch, install all sis drivers, install Nvidia drivers, install XP service pack. If that doesn't work, get mad, scream and run out the front door with arms flailing!

K7D Master-L MS-6501 computer locks up when transferring data to external HD

I'm not 100% sure the problem is with the motherboard, but I think I've narrowed it down to the point that the MB could be the problem, and so I figured it was worth a shot to see if anyone else had heard of this problem or perhaps had any suggestions as to what it could be...anyway...
Here's the problem: whenever I try to transfer large data files onto my LaCie 250GB external HD, my computer locks up completely. No CTRL+ALT+DEL. No Pass Go (and certainly no $200 :P). The connection interface is USB 2.0, to which I use the USB 2.0 controller card that came with my MB. When I connected the HD to my laptop (Dell Inspiron 5150, I think), it transferred the files flawlessly. Also, when I connected the drive to my roommate's desktop (another homemade system, though much beefier), it also read from/wrote to the HD without a hitch. I even tried connecting the HD to my laptop, and (since my desktop & laptop are on the same network) mapped the HD onto my desktop as a network drive. Then I transferred 24GB+ of data w/o any lock ups or problems whatsoever. However, when I reconnected the HD back to my desktop and tried transferring a little over 500MB worth of files, it locked up after getting about 75% through. I even tried disconnecting all of USB devices but the HD (and my mouse) and it still locked up after getting so far w/ the transfer.
The issue doesn't seem to be a data-throughput issue, b/c it transferred just fine when the HD was mapped as a network drive, and the drive works flawlessly on other computers, so I don't think the problem is in the drive itself (or the cable). The only time there is an issue is when the HD is connected to my desktop via any USB port (I've tried both the on-board ports as well as the controller card ports). Have any of you guys (or gals) ever heard of such an issue? I hesitate to say it's the ports themselves b/c I've got about 8+ USB devices connected to my computer at any given time, and none of them have any issues communicating back and forth (nor have they ever locked up my machine like it's doing now). A couple of friends have suggested that it might be a driver or BIOS issue, but I can't seem to find any USB driver updates for my MB model (I have only the ones on the disc that came w/ my MB) and the MSI website warns not to flash the BIOS if everything is running ok with your computer (which it is, minus this issue). My BIOS version is 1.6 (probably should've put that w/ my signature :P)
I hope this is enough info to go on. Any help or suggestions would be greatly appreciated. Thanks for your time!

To my knowledge, both of the other systems it was tested on had SP1 installed (I know that's the case on my laptop).
I dunno if it would make a difference, but my laptop has WinXP Home, whereas my desktop has Pro installed.

Computer Locking Up at Random Issue

I am having an issue with the computer locking up when the side panel is in place and I am doing windows updates where its constantly processing and lots of hard drive activity. I am kind of thinking that its something to do with possibly the processor overheating but I am not for sure and would like to ask for advice here from others who have more experience with that this might be able to point me in the right direction.
I have an MS 6590 Ver 1 main board, with an AMD Athlon 2500+ processor. The hard drive is brand spankin new just bought it today April 2nd (WD 160GB). I have a dual fan power supply (Antec 350 watt) and a fan in the front, a fan in the rear, and one on the processor.
I have removed the side panel and am going to leave it off for a while to see if that stops the lock ups, if so then i guess i can assume that overheating is what is causing this, and then i just need to find out what is overheating.
What can I do to try and trouble shoot whats causing the lockups? Anyone have any further advice?
Thanks
Doug

Quote
I have an MS 6590 Ver 1 main board
Which one exactly?
http://global.msi.eu/index.php?func=searchresult&keywords=ms-6590
Quote
The hard drive is brand spankin new just bought it today April 2nd (WD 160GB)
IDE? SATA?
Did you have any problems with the old hard drive?

My computer locked-up, and when rebooted, my itunes library was gone, replaced with a brand new library. Fortunately, my 450 GB iTunes library is still on the computer. Question is how do restore my original library without having to reload folders? Tks

Help! My computer locked-up and had to be rebooted. However, when I restarted it and hooked up my iPod, I noticed my existing iTunes library (all 450 GB of it) was GONE and was replaced by a brand new library. Fortunately my old, 450 GB library is still on my hard drive under iTunes in Windows Explorer. How or why could this have happened, and most importantly how can I restore my old libary without having to manually import allow of my music and hundreds of Podcasts and 16000+ podcast files?
Thanks for any help....

What you're describing is the expected behaviour. I believe though that is also is the easiest way to have all the contents available to both of you at all times. If you have a spacious hard drive you should probably allow this to happen as anything else will be harder to manage.
My suggestion would be the following if you want to try something different.
Store all your music at a location that is accessible by both of you — an example would be to use your Public Folder as the locations where iTunes will go and look for all the media files—. Your wife does have access to it.
In the Finder you will need to move the folder name iTunes Music to the location in your Public Folder (see above). Once that's done, you and your wife will have to go into the iTunes Preferences > Advance Preferences and un-check Copy files to iTunes Media folder when adding to library. From this point on, you can continue to use iTunes as usual. You'll need to tell your wife what has been newly downloaded/imported into your iTunes so she can manually go look for those items in that Public Folder iTunes of yours and import them into her iTunes. She will not duplicate by doing that, but, like I say this is an all-manual work.
She can do the same, so you have access to contents she imported herself. One more downside of this is that both usernames have to be active in your iMac. If yours isn't, she won't be able to access any item (song, book, app) located in your Public Folder's iTunes.
I'm sure there's a way, if you have an router with external hard drive conectivity, for both of you to be able to access —independently— the iTunes Media at all times but I was just reading at another post that doing so can further complicate things.
Hope this helps. Please let me know what you think or decide to do.
Jorge...

Computer locked up after using boot camp

after trying to install windows on my mini mac, my computer locked up, black screen with the words "no bootable devise--insert boot disk and press any key

Hello, try this...
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Printing a PDF & computer locks up

When I print a word doc use "Adobe PDF" as my printer, my computer locks up. I have to use ctrl alt del, open task manager & close Word. Before a Windows update, I could print to an Adobe PDF & the file would be saved to the folder of my choice. Are there any suggestions on how to fix this problem?

Workaround:
Since you have the ability to "print to PDF" I can only assume that you're using Acrobat and NOT Reader to do so, because Reader doesn't have that capability.
Save the doc file with Word, and open Acrobat. Click File>Create>PDF from file and select the doc to create it from.
That's a pain, I know, but it beats a locked up PC.

Computer locks up -have to do hard shut down- after about two times its ok

Seems like the computer locks up on battery or AC. When I shut down with the power button two or three times things seem to work ok for a while. I bought this about two weeks ago and the seller stated that g4's have a problem with processor location that can make computer act up. could this be the problem.

Welcome to Apple Discussions!
When you say the computer locks up, do you mean it freezes and you have to force shut it down? This is not considered normal behavior. It could indicate logic board problems. What the seller told you sounds like BS to me. You might want to consider returning this one and looking for a different one. Even if the problem is intermittent now, it likely will get worse over time. And could be expensive to fix.
Good luck!

TS1394 Can't re-install Leopard. Trying to reinstall the OS because computer locks up. It is a 2008 iMac that came with Leopard. Upgraded to Snow Leopard. Tried to archive and install from original DVD that came with iMac. Installation failed, so tri

Computer locks up, so I want to reinstall the OS. I had upgraded to Snow Leopard.
Tried to do an archive and install from the DVD that came with the computer, but that failed.
Tried to do an erase and install, but the install stops somewhere near the end, 13 minutes to go. Tried several times, same result.
Can't reboot from the install disk, it just ejects the disk and I get the flashing question mark.
Any suggestions will be appreciated.

I think my hard drive is toast. When I boot in single user mode, I get the following text:
CSRHID Transition Driver: start booting in single user... will wait for window server
Then the following text appears, repeating itself over and over, except that the numbers (indicated by "xxxxxxx")
SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
disk1s3: I/O error.
0[level 3] [READUID 0] [Facility com.apple.system.fs] [ErrType IO] [Err No 51] [IDType READ] [PB1kNum xxxxxxxxx] [LB1kNum 0] [FSLogMsgID xxxxxxx] [FSLogMsgOrder First]
0[Level 3] [READUID 0] [Facility com.apple.system.fs] [FSLogMsgID xxxxxxxxxx] [FSLogMsgOrder Last]
These messages keep repeating with the numbers (xxxxxxxxx) changing with each iteration.
Does this indicate a bad hard drive?
Thanks.

Can't update from 10.0.0 to 10.2.8 as screen freezes and computer locks up

Can't update to 10.2.8 as screen freezes and computer locks up when using Pref/view/update/10.2.8 100 meg combo update. I have to wipe disk and reinstall 10.2.0
I can't find a stand alone combo that works with 10.2.0 - indeed I can not find any update for 10.2.0. I do find discussions of the 10.2.1 and 10.2.2 updates, and once one has 10.2.2 there is a combo to get to 10.2.8.
What is the solution - by the way I like 10.2.0 better than prior 9.2.2, and do not mind having to wipe disk and lose 9.2.2. But my wavelan 16 bit wireless PCMIA card, indeed any airport card, no longer is recognized. Indeed I can't find Airport. This is a 10 year old computer and files/docs etc are long gone (but life was good until I decided to move to X this month). How do I correct this lack of wireless (it does connect directly to my Ethernet line so getting on the web is no problem)?

Hello papau. Welcome to Apple Discussions.
You could try the 10.2.6 combo as that will install on 10.2
http://docs.info.apple.com/article.html?artnum=70174
and then 10.2.8 which requires 10.2.6 can be downloaded here.
http://www.apple.com/support/downloads/macosxupdate_.html
Run Repair Permissions in Disk Utility, found in Applications/Utilities/ before you start and once again when you finish.
During the installation process, just wait till the system completes things and not use any other applications until the update is finished.

When I use Preview my computer locks up. Can't use it to view PDFs. Any ideas?

When I use Preview my computer locks up. Can't use it to view PDFs. Any ideas?
I try to save files as a PDF on external hard drives. When I select SAVE AS PDF I get spinning colorwheel and the program I am using locks (Quicken, Quickbooks, Gmail etc.)

There were several /Library/preferences. The only one that had the file was the one under my user name. I deleted it. I was using Quickbooks when the problem started. It is locked. I have to reboot the computer to use it again. I tried SAFARI using the PRINT button then SAVE AS PDF. It didn't work. It locks Safari up. I will reboot and hopefully continue.
P.S. I've done this procedure before and I was able to Save, but then the problem came back.

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

Do you have Parallels installed by any chance? There is a known problem that causes symptoms similar to this. You do not need to actually be running Parallels at the time and nothing in ActivityMonitor would point to Parallels. An update corrects the problem:
http://kb.parallels.com/111541

Why does my computer lock up when some videos start to run?

When I load some videos the video will start for a few seconds then stop. At this point my whole computer locks up and I have to do a restart to get my mail or on the internet.
I have right clicked on the video and disabled the acceleration function. That worked for a while but the problem has started again. When I right click the video it shows that the accelerator is NOT enabled but my computer locks up. Thanks for any help, Hosteen - Nez

http://forums.adobe.com/thread/1195540

AGPGART, SiS-AGP, Nvidia = Computer Lock

Similar Messages

Maybe you are looking for