AGPM 4.0 SP2 Configure AGPM Server connection

Hi,
I've got some problems configuring AGPM 4.0 SP2 in my environment.
In my Test-Lab I have a Windows server 2008 R2 Domain and 2 Windows 2012 R2 Server.
One Windows 2012 R2 Server is AGPM Server and the other one is the AGPM Client.
After installation of the application I want to configure an AGPM Server connection on the AGPM Client.
But there is no AGPM pane or section.
The eventlog shows, that the installation were sucessfull.
Any ideas why I can't see the AGPM section on GPMC?
Regards kwakS
Greets kwaks

I've got an idea, but I want to have some feedback. :)
My forest has a child domain. And I want to install AGPM into the child domain.
Could this be a reason why it's not working?
Greets kwaks

Similar Messages

  • Help (pleeeease) with configuring FTP server connection

    HI...I am so frustrated. You have to understand that I am not completely stupid, but I just cannot understand the process which will allow me to connect to a **^&-**** FTP server!!!
    Here's the deal:
    Me, graphic designer, designing among other things, websites.
    Dreamweaver, the software program that I use to design websites.
    So, I design a site, and configure it to upload via FTP. I get the FTP hostname, username, password info from the intended Internet Service Provider, and load that info into the required fields in the Site Manager window. Everything is great until I try to connect to the server....it just won't do it! I get error messages that state flatly that I cannot connect to the remote server, for reasons that are as bland as "username and password information incorrect". I have called the ISP to determine if I am using the correct username, password blah blah blah, and everything checks out on their end. It seems that everyone else but me can connect to a bloody FTP server! Harrumph.
    So...what can I do? Is it that something in the System Preferences panel needs to be adjusted to allow me access to FTP? I have fiddled around a little in there, but don't change anything, because I don't know what TCP/IP, proxy settings, etc. MEANS!!! All I did was allow FTP access (duh).
    Another point of interest is permissions...somewhere along the way, during my long and convoluted journey with this problem, a message came up that mentioned that. Permissions. Don't know what that means either.
    Is there anyone out there that can help me?? I am so confused, and just need a little education. I would greatly appreciate any advice or information. Thanks! Janelle
    iMacG4   Mac OS X (10.4.7)  

    Hi Janelle: I assume the domain is georgeponzini.com
    1. http://georgeponzini.com/index.htm works so we know you have an index.htm page uploaded to the server but it contains no information at all, like you uploaded a completely blank page, no title, no code, nothing, nada...
    2. http://georgeponzini.com/index.html does not exist, you never uploaded a page so what we see is an error page, saying such a file does not exist.
    3. The link you have ftp-dom.earthlink.net/ is for uploading directly from a browser but I could not get it to work in Safari but does work in Firefox, which you can consider downloading and using.
    4. If you can upload from your Control Center at Earthlink.net, that's a no brainer, this is the option to take, you cannot make any errors doing it this way. But that we'll figure out next... It's ok you do not see a public_html folder you are probably already in it when you log in. Where you given instructions to upload into the WEBDOCS/ folder, if so you did that right.
    BTW - have you checked with Earthlink that Control Center will work on a Mac using Safari asa browser
    5. Your index.htm page/file is NOT where you upload to, the index.htm IS the 'Home Page' or 'Index Page'. You're seeing a white page because it contains no information, but you must have uploaded a file/page named index.htm (see 1 above)
    6. If you have files/pages uploaded in the correct area, see if you can rename any file index.html - I am sure you can do this at the Control Center, if not do this on your computer and use 'save as' > index.html - upload this file/page and see if it displays
    Let me know what happens, Rick
    iMac G5 iSight 20" - 30G iPOD - HP Pav 15" WS and Toshiba Sat 17" WS   Mac OS X (10.4.7)   Canon 20D & A620

  • AGPM 4.0 SP2 no "Submit Deploy Request" pop-up

    Hi - I'm in the process of deploying AGPM 4.0 SP2 in a 2008R2/Win7 Ent environment, using "least privilege" scenario as described here:
    http://blogs.technet.com/b/askds/archive/2008/12/16/agpm-least-privilege-scenario.aspx
    This is a new install.  I installed the AGPM server on a non-DC 2008R2 member server.  I also added Group Policy MMC & AGPM client to this server, and everything works fine & as-expected from an RDP session on this server.
    On our Win7 Ent desktops, we have the RSAT tools, and the AGPM client.  At first, all of the buttons were grayed out in "Change Control," even for the AGPM Admins role group members, but the same userid's could RDP to the AGPM server and all
    functionality was available.  There was no dropped traffic logged by our network or host-based firewalls.  Somehow this part resolved it itself.
    Now, when someone who has Reviewer,Editor permissions tries to deploy a controlled GPO from their Win7 Ent desktop, we just get a pop-up titled "Deploy GPO" and message "Are you sure you want to deploy the selected GPOs?".  There
    is a "Restore Links" checkbox & an Advanced button that are grayed out.  But Yes & No buttons are available.  I hit Yes, the "AGPM Progress" window comes up, and Status goes to "1 actions could not be processed." 
    And nothing happens. I've rebooted the workstation & tried again - same result.
    When I attempt this same deployment, via same userid, from the AGPM server, I get a "Submit Deploy Request" window that sends an email to the address configured, and moves the GPO to the Pending tab.
    I should note that I logon to my Win7 workstation with my non-privileged account, and right-click "run as administrator" on Group Policy Management, but when I RDP to the server, I logon with my privileged account directly.
    I am not seeing any dropped network traffic at all.  Any ideas of what could be going wrong?  Thanks!

    Hi,
    I’m glad to hear that you have resolved the issue. If there is anything else I can do for you, please do not hesitate to let me know. I will be very happy to help.
    Best Regards,
    Andy Qi
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Andy Qi
    TechNet Community Support

  • AGPM 4.0 SP2 Editors cannot open "Windows Firewall with Advanced Security" area of a GPO

    When attempting to Edit a checked-out GPO in AGPM, & navigating to "Computer Configuration\Policies\Windows Settings\Security Settings\Windows Firewall with Advanced Security\Windows Firewall with Advanced Security - LDAP://CN...." Editors
    get:
    "There was an error opening the Windows Firewall with Advanced Security snap-in
    An error occurred while trying to open the policy.
    Error: The system cannot find the path specified
    Code 0x3"
    This happens with GPOs that existed prior to AGPM install where the GPO was "controlled", and with new Controlled GPOs created within AGPM.  A workaround is to grant the user Full Control within AGPM (and have them re-launch Group Policy Management
    MMC via Shift right-click "Run as different user"), but this circumvents the Change Control we are attempting to use AGPM for.  Any ideas of how to fix this, or how to file a bug report?
    Also, changes made to Incoming Firewall rules do not show up in the AGPM Settings or Differences reports.  I'd imagine this is related to the known issue described on the Release Notes page here:
    http://technet.microsoft.com/en-us/library/dn458958.aspx

    Hi Fabian - Thanks for the response.  I checked & the AGPM Server is on a subnet that was not mapping to any AD Site.  Based on its subnet/location, it actually should be in the same Site as the PDCe.  I added a new Subnet definition to
    AD & waited until "nltest /dsgetsite" was reporting the correct Site on the AGPM Server.  Now, with just Editor role, I can access the Advanced Firewall area of a checked out GPO from my AGPM Client, which is correctly in a different AD Site. 
    I think this might have solved it.
    Should this requirement be added to AGPM documentation?  "AGPM Server must be installed on a server that is in the same AD Site as the DC holding the PDCe role."
    Thanks for the tip!

  • SQL Server Configuration Manager – Cannot connect to WMI provider – Invalid class [0x80041010]

    look at this post am getting the same
    http://social.msdn.microsoft.com/Forums/en-US/sqlkjmanageability/thread/4c8ca86c-105f-4f0a-ac18-6e33dda2bc46
    but when I tried the solution given there , It is not working
    the error I am getting is mofcomp is not recognized as internal or external command
    I tried in  C:\program files\Microsoft sql server\90\shared  and in Windows\system32
    I am getting the same error

    Hi sql393,
    Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 servers with SQL Server Configuration Manager. Invalid class [0x80041010].
    The solution is to go to a command prompt and then run mofcomp.
     C:\Program Files\Microsoft SQL Server\90\Shared>mofcomp "C:\Program Files\Microsoft SQL Server\90\Shared\sqlmgmproviderxpsp2up.mof"
    For more information, please refer to
    http://blogs.msdn.com/b/echarran/archive/2006/01/03/509061.aspx
    http://msmvps.com/blogs/martinpoon/archive/2009/11/27/sql-server-configuration-manager-cannot-connect-to-wmi-provider-invalid-class-0x80041010.aspx.
    Thanks,
    Maggie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

  • Verifying Server Connection in Configuration Manager

    I am trying to deploy ES3 on Weblogic 10.3.6 and am having a problem with Configuration Manager. When I Verify Server Connection, the CM spins for a bit then comes back with a ALC-LCM-100-011 error, Cannot Connect to Application Server.
    In the CM log there is this:
    com.adobe.livecycle.cdv.CDVInternalException[ALC-LCM-100-011]: Cannot connect to application server.
    Application server host or port may be invalid.
    Caused by: java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.mbeanservers'
    I know the info is correct, in fact when I intentionally use a wrong password or account the CM immediately returns that the info is wrong.
    My WL architecture has a WL domain with distributed development and staging managed servers (no clusters). The Admin server is standalone, as are the two managed servers. I am attempting to install on one of the managed servers.
    Any hints here? Thanks!

    See the link http://help.adobe.com/en_US/livecycle/10.0/PrepareInstallSingle/WS624e3cba99b79e1229e967b2 12eea97f932-7ffe.html . It has the below text :-
    Two primary startup scenarios are available for WebLogic:
    Using Node Manager and configuring through the Administration Server (recommended)
    Directly starting the Managed Servers with configurations in the StartManagedWebLogic scripts
    To use the automatic configuration features of Configuration Manager (the recommended option), you must use the Node Manager and configure through the Administration Server.
    If you are directly starting the Managed Servers, you can still use the automatic configuration features of Configuration Manager. However, you must manually enter the Configuration Manager changes into the StartManagedWebLogic scripts. For the appropriate steps, see Installing and Deploying LiveCycle for WebLogic .
    I think, if you want to use configuration manager for authomatically configuring the managed servers, you have to supply the admin server port while verifying the connection for weblogic server.

  • Unable to connect siebel gateway name server during configuration enterprise server

    Hi,
    when I try to configure Siebel enterpise after entering the port of the gateway server name I get the following error: "Unable to connect gateway server name".
    I perform the following steps:
    1) Configuration Gateway Server Name
         Entered port TCP/IP = 2320
         Enable automaticaly start server gateway name server
         Show pop up "Configuration siebel succesful"
    2) Configuration Enterprise Server
         Entered name account authentication gateway server name = SADMIN
         Entered passoword account authentication gateway server name = SADMIN
         Entered name host gateway server name = VDIMTNSIEBEL01 (name my machine)
         Entered port TCP/IP gateway server name = 2320
         show pop up error : "Unable to connect gatawey server name"
    I can not find the log file in order to understand the issue.
    When I try to connect to the gateway from the browser with the url
    vdimtnsiebel01:2320 I get this screen mode:
    ???@??????? ?????????? ????????QÈ  ??? ??????????? ??? ??? ? ?h????
    and writes this log in the file "C:\siebel\8.1.1.0.0\ses\gtwysrvr\log\NameSrvr.log
    SisnapiLayerLog Error 1 0000001151c810a0:0 2013-06-25 10:11:27   4980: [SISNAPI]: Rx msg len=0 peer=VDIMTNSIEBEL01.ISCVDI.LOCAL avail=325 Hello expected session=13
    474554202F66617669636F6E2E69636F
    20485454502F312E310D0A486F73743A
    207664696D746E73696562656C30313A
    323332300D0A557365722D4167656E74
    3A204D6F7A696C6C612F352E30202857
    696E646F7773204E5420362E313B2057
    4F5736343B2072763A32312E30292047
    65636B6F2F3230313030313031204669

    Hi,
    Please clarify me the following.
    You specified the login name as 'SADMIN'. Is this the login id, that you used for your Operating System? "Entered name account authentication gateway server name" expects you to enter the NT login, not the DB login.
    You may also expected to specify your network name, if your login id is specific to a network. e.g Oracle\Rajkumar assuming that Oracle is your network and Rajkumar is the user name.
    You may not expected to have the DSN created, as Gateway may not be interested in knowing which DB you are connected to. And you neither enter the 'DB name' anywhere in the 'Gateway Server Configuration', if my understanding is right.
    Please confirm.
    Below pages are for reference (not directly relevant to your question):
    http://docs.oracle.com/cd/B40099_02/books/SiebInstWIN/SiebInstCOM_Prep18.html
    Bookshelf v8.0: Requirements for Siebel Gateway Name Server Installation and Configuration
    Thanks.
    Regards,
    Rajkumar Raju

  • Configuring Sender HTTPS Connection -- Server/Client Authentification

    Hello together,
    I need to configure an HTTPS Sender Connection with client and server authentication. I have already check the documentation however I am still not sure about the particular steps. My questions are as follows:
    - Do I configure the HTTPS connection on the ABAP or JAVA stack?
    - Is it necessary to setup an HTTP sender communication channel
    - How does the URL look like (compared to HTTP connection)?
    I have provided XI certificates to the client and the client has provided the certificates to me already. So I guess I have to import them somehow on XI.
    Any help is appreciated!
    Thank you very much.

    Hi
    Please follow below steps for HTTPS configuration as sender
    You need to use either SOAP adapter or XI Adapter for HTTPS connectivity.
    Here configure the Security Check for Inbound Messages.
    Refer below links
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/4f/0a1640a991c742e10000000a1550b0/frameset.htm
    XI3.0: Soap Sender with HTTPS
    SAP Security Guide XI, HTTP and SSL
    http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/97/818a4286031253e10000000a155106/frameset.htm
    No configuration is required in the adapter-specific sender channel configuration (inbound) of the Integration Directory.
    The authentication/authorization is performed by the J2EE Engine and therefore needs to be configured with the Visual Administrator. This configuration is described in the J2EE Engine Administration Manual and is outlined in the following section.
    When a message is to be sent to the Adapter Engine (and ultimately to the Integration Server), the J2EE Engine serves as the SSL Server and presents its server certificate to the client as part of the SSL handshake procedure.
    Client-Side Configuration (Required)
    The public certificate of the trusted authority (CA) that signed the public certificate of the SSL server needs to be imported to the list of trusted certificates of the SSL client. This allows the SSL client to accept the certificate of the server in the SSL handshake.
    Server-Side Configuration (Optional)
    If basic authentication is used, no additional configuration is required on server side.
    If client certificate authentication is requested or required by selection of the corresponding option in the SSL service and configuration of the ClientCertLoginModule in the SecurityProvider service (using the J2EE Administration Tool), additional configuration steps are required.
    If the server certificate check on the client side is successful, the client sends its public certificate to the server as part of the SSL handshake (when requested). The server needs to map the certificate to a user for authentication and will then check the authorization based on the security roles of the user.
    Perform the following steps to allow the J2EE engine to map the client certificate to a user:
           1.      Import the CA cert of the client certificate to the list of trusted certificates (TrustedCAs keystore view in the keystore service) and import the client cert to an arbitrary keystore view.
           2.      Map the client certificate to an existing user with role SAP_XI_APPL_SERV_USER by using the Visual Administrator, SecurityProvider service, UserManagement tab page.
    Refer below link
    Here u go
    http://help.sap.com/saphelp_nw04/helpdata/en/65/6a563cef658a06e10000000a11405a/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm

  • SLD Configuration error: Dispatcher running but no server connected!

    Hi Gurus,
    In t-code solman_setup under SLD configuration, the error dispatcher running but no server connected is prompted in the web browser.
    Also, I've noticed that in SAP MMC the server0 in AS Java Process table has a return code error of -11113.

    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -XX:MaxNewSize=341M
    -> arg[  4]: -XX:NewSize=341M
    -> arg[  5]: -XX:MaxPermSize=512M
    -> arg[  6]: -XX:PermSize=512M
    -> arg[  7]: -XX:SurvivorRatio=2
    -> arg[  8]: -XX:TargetSurvivorRatio=90
    -> arg[  9]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 10]: -XX:+HandlePromotionFailure
    -> arg[ 11]: -XX:+UseParNewGC
    -> arg[ 12]: -XX:+DisableExplicitGC
    -> arg[ 13]: -XX:+UseTLAB
    -> arg[ 14]: -XX:+PrintGCTimeStamps
    -> arg[ 15]: -XX:+PrintGCDetails
    -> arg[ 16]: -verbose:gc
    -> arg[ 17]: -Dsun.io.useCanonCaches=false
    -> arg[ 18]: -Djava.awt.headless=true
    -> arg[ 19]: -Djco.jarm=1
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 23]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 24]: -Djava.security.policy=./java.policy
    -> arg[ 25]: -Dsys.global.dir=G:\usr\sap\SMP\SYS\global
    -> arg[ 26]: -Dapplication.home=G:\usr\sap\SMP\DVEBMGS00\exe
    -> arg[ 27]: -Djava.class.path=G:\usr\sap\SMP\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SMP\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=C:\j2sdk1.4.2_17-x64\jre\bin\server;C:\j2sdk1.4.2_17-x64\jre\bin;C:\j2sdk1.4.2_17-x64\bin;G:\usr\sap\SMP\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;G:\usr\sap\SMP\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=2048M
    -> arg[ 30]: -Xmx2048M
    -> arg[ 31]: -Xms2048M
    -> arg[ 32]: -Xss2M
    -> arg[ 33]: -DLoadBalanceRestricted=no
    -> arg[ 34]: -Djstartup.mode=JCONTROL
    -> arg[ 35]: -Djstartup.ownProcessId=2184
    -> arg[ 36]: -Djstartup.ownHardwareId=E1203704103
    -> arg[ 37]: -Djstartup.whoami=server
    -> arg[ 38]: -Djstartup.debuggable=no
    -> arg[ 39]: -Xss2m
    -> arg[ 40]: -DSAPINFO=SMP_00_server
    -> arg[ 41]: -DSAPSTART=1
    -> arg[ 42]: -DCONNECT_PORT=64999
    -> arg[ 43]: -DSAPSYSTEM=00
    -> arg[ 44]: -DSAPSYSTEMNAME=SMP
    -> arg[ 45]: -DSAPMYNAME=solmanprd_SMP_00
    -> arg[ 46]: -DSAPPROFILE=G:\usr\sap\SMP\SYS\profile\SMP_DVEBMGS00_solmanprd
    -> arg[ 47]: -DFRFC_FALLBACK=ON
    -> arg[ 48]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 49]: -DSAPSTARTUP=1
    -> arg[ 50]: -DSAPSYSTEM=00
    -> arg[ 51]: -DSAPSYSTEMNAME=SMP
    -> arg[ 52]: -DSAPMYNAME=solmanprd_SMP_00
    -> arg[ 53]: -DSAPDBHOST=SOLMANPRD
    -> arg[ 54]: -Dj2ee.dbhost=SOLMANPRD
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 3032] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 3384] Tue Nov 30 16:51:03 2010
    [Thr 3384] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 3384] Tue Nov 30 16:51:04 2010
    [Thr 3384] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 3384] Tue Nov 30 16:51:05 2010
    [Thr 3384] JLaunchISetClusterId: set cluster id 1030850
    [Thr 3384] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 3384] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    Tue Nov 30 16:51:12 2010
    10.572: [GC 10.572: [DefNew: 174592K->11860K(261888K), 0.0496237 secs] 174592K->11860K(2009856K), 0.0496873 secs]
    Tue Nov 30 16:51:16 2010
    14.788: [GC 14.788: [DefNew: 186452K->15631K(261888K), 0.0420753 secs] 186452K->15631K(2009856K), 0.0421219 secs]
    Tue Nov 30 16:51:20 2010
    18.420: [GC 18.420: [DefNew: 190223K->19899K(261888K), 0.0434161 secs] 190223K->19899K(2009856K), 0.0434632 secs]
    Tue Nov 30 16:51:27 2010
    25.759: [GC 25.819: [DefNew: 194491K->28552K(261888K), 0.0664462 secs] 194491K->28552K(2009856K), 0.0665127 secs]
    [Thr 2512] Tue Nov 30 16:51:28 2010
    [Thr 2512] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 2512] **********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'
    for additional information and trouble shooting.
    [Thr 2512] JLaunchCloseProgram: good bye (exitcode = -11113)

  • While Configuring Siebel Server we are getting "Unable to Connect to Gateway server" error in siebel 8.2.2.14

    Hi
    While Configuring Siebel Server we are getting "Unable to Connect to Gateway server" error in siebel 8.2.2.14
    Our OS is windows 2008 R2 64 bit,Orcale client is 11g 32 bit and Oracle DB is in 11g.We are also able to connect to DB using ODBCSQL.
    Please help.
    Regards
    Shuvendu

    Hello Shuvendu,
    Thanks for using Oracle Communities.
    About your error, there could be many reasons, To start with, please have following knowledge article to know possible reasons.
    C028: "Unable to Connect to the Siebel Gateway Name Server" Logged By Configuration Wizard (Doc ID 1391312.1)
    I hope it helps.
    Best Regards,
    Chetan
    P.S. If any one of the provided responses has been correct or helpful it would be great if you could mark them as appropriate.

  • The amount of data that was returned by data connection has exceeded the maximum limit that was configured by server admin

    Hi There,
    When i try to view info-path form item getting warning (This issue is not with all items but for some of them...)
    "The amount of data that was returned by data connection has exceeded the maximum limit that was configured by server admin............."
    Thanks in advance!!
    Regards
    Vikas Mishra
    Vikas Mishra

    HI Vikas,
    to resolve this do this from central admin
    Ensure to follow the below steps.
                                             i.    Open
    the central administration
                                            ii.    Go
    to General Application Settings
                                           iii.    InfoPath
    Form Services
                                          iv.    Configure
    InfoPath Form Services
                                           v.    Click
    on Data Connection Response Size
                                          vi.    By
    default it is 1500 kilobytes
                                         vii.    Change
    the Response Size in kilobytes (Increase the number).
    Kind Regards,
    John Naguib
    Senior Consultant
    John Naguib Blog
    John Naguib Twitter
    Please remember to mark this as answered if it helped you

  • How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

    how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

    Hi ,
     Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA  outside interface . 
    Accordingly you can configure NAT 
    HTH
    Sandy . 

  • ASA 5505 configured for WebVPN connecting to Citrix Web Interface

    ASA 5505 configured for WebVPN connecting to Citrix Web Interface.
    i have a ASA 5505 that I am attempting to configure for WebVPN with passthrough into Web Interface .  The user authenticates into WebVPN OK and gets the option to click on the Citrix Link (which is i add bookmark  citrix server http:// 172.30.40.5.) i enter the citrix and then for example  i want to open to outlook it can not open. (when i want to open some application no application is open)).there is no alarm at asa. how i solve this issue?
    thanks.

    Teymur,
    Can you confim that after disabling the ssl/tls on the Citrix server (secure connectivity) that you are getting exactly the same error.  It is possible that it is generating a different error.
    The bug where we have see the existing error was CSCtf06303 but that has been fixed in 8.4.1.  Can you confirm the exact version of code you are running on the ASA.
    If you have confirmed the above two notes it may be adventageous to open a TAC case as we may need to do some live additional troubleshooting.
    Thanks
    -Jay

  • Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

    "[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
    After patches applied on patch Tuesday the database reports the above error. 
    All accounts are domain accounts and SQLServer uses Windows auth.
    DCDIAG show no errors
    All servers and DC have been restarted,
    Message in db log confirms the connection is being denied due to trust.
    Event log shows same rejection
    Protocols enabled: named pipes, tcpip, memory
    TESTS:
    PortQry: "
    TCP port 1433 (ms-sql-s service): LISTENING"
    Connect with domain admin accounts works from multiple clients systems to DB.
    Cannot connect with newly created domain admin account
    Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
    New standard user also fails to connect.
    NOTES:
    I removed the SSL patch and the IE security update to see if that was an issue.
    ¯\_(ツ)_/¯

    Has someone left the company or has an account of some nature been dropped/replaced?
    Please click "Mark As Answer" if my post helped. Tony C.
    Hi Tony,
    Srry but No.  We just installed the monthly updates.
    I went back and found I had missed removing a patch.  I missed the rollup for Windows Server 2003:
    Event Type: Information
    Event Source: NtServicePack
    Event Category: None
    Event ID: 4382
    Date:  3/12/2015
    Time:  12:26:04 PM
    User:  NETTEST\admin
    Computer: DATA1
    Description:
    Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
    After I removed that is still didn't work but after about five minutes it started working.
    I guess I ned to report that to MS after I research what might be changed to make the patch work.
    Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
    Thanks for replying.
    Well - maybe this will help someone else.
    Thanks again for replying Tony
    ¯\_(ツ)_/¯

  • Sql Server Connection Issues

    After reinstalling Windows Server 2008 R2 EE my SQL 2008 R2 Sp2 Instances have some connection issues.
    The server were installed under the same hostname, but he got a new sid in my active directory.
    On the server there one DB Engine MSSQLSERVER, two named Reporting Services for MS crm 4.0 and SCOM and one Analysis Services Instance.
    The DB Engine will collect Data from another DB, before writing to Analysis Services.
    Here are the problems on the server:
    When I connect via SSMS remotly, I sometimes get this error: Failed to connect to server <hostname> ... Named Pipes Provider, error 40 - Could not open a connection to SQL Server - Error 5
    Both RS Instances have many event log errors like "Report Server (Instance) cannot connect to the report server database.". RS Reports are working fine, but sometimes the rendering is taking a long
    time.
    The DB Engine Agent Job to collect Data sometimes throw the following error: An OLE DB error has occurred. Error code: 0x80004005.  An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 10.0"  Hresult:
    0x80004005  Description: "Unable to complete login process due to delay in opening server connection".  End Error  Error: 2013-12-10 06:03:40.41     Code: 0xC00291EC
    User use Excel to connect to the Cube on my server. Often they got timeout errors. When they connect again it will work.
    Are there any solutons on this?
    Thanks a lot!

    Hello,
    The server were installed under the same hostname, but he got a new sid in my active directory.
    Did you connect to SQL Server instance with Windows authentication? Since the SID of domain account is changed, the SQL Server instace may cannot verify the login account which stored in the master with old SID. In that case, please try to connect
    SQL Server with SQL authentication and then readd the domian as login the instance.
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

Maybe you are looking for