AGPS for N95 - alternatives to download via GPRS?

I am running Garmin Mobile XT on my N95. It's cool. I have the following questions.
1. For Assisted GPS, what is the Positioning Server? Is it supl.nokia.com?
2. For Access point, I am given only a list of GPRS connections. Is there any way I can add my WiFi connection?
3. The amount is small, but with AGPS enabled, each time I turn on GPS, it incurs data of 1KB sent and 4KB received. I read that for other devices using AGPS or similar solutions, you can download the AGPS data using your internet connection. How do I do this for the N95?
4. How does the AGPS for N95 actually work? Does it download a set of data everytime you turn on GPS or every x number of days? If it is the latter, then I can simply enable AGPS every x number of days and disable AGPS in the interim.

Thanks for the explanation. If the N95 AGPS merely works in the way you have explained (i.e. AGPS just uses a distant server to do the number crunching much faster after the various satellites have been located by the internal GPS receiver), then the following conclusions can be drawn:
1. It will be activated everytime you turn on GPS and not once every x days (seems to be the case)
2. The amouht of data transmitted will be the same or similar every time (seems to be the case)
3. It will not be possible to download the AGPS data via other means beforehand.
4. Since AGPS works only AFTER the device has located the various satellites, it doesn't really help in satellite acquisition although it helps in the calculation thereafter. This means any increase in speed is marginal since I don't think it takes too long to calculate without AGPS?
I had read that in some forms of AGPS, it downloads orbital data of the satellites to enable the device to achieve a lock much faster. That is why it is possible to download the data beforehand via internet and other means, and that the device needs this updated information only once every few days and not everytime you turn on GPS.

Similar Messages

  • I am using an iphone 3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.

    HEY GUYS I AM USING AN IPHONE  3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.
    AND ALSO I HAVE HEARD THAT THE IPHONE 3G CANNOT BE UPDATED TO IOS 4.2!IS IT TRUE???
    PLEASE HELP ME.

    This means that the phone you have was software unlocked to use on any carrier, or hacked. When you installed the update it restored the lock that originaly came with your phone. Not much you can do now. Apple will not support hacked phones. You will need to find out the carrier your phone is locked to and see if they offer official unlocking, or start googling to see if you can find a way to unlock 4.2.

  • I have pages 4.1 on my iMac and they tell me I have to download Pages for my iPhone to store in iCloud, etc; but when I go to the Apple Store to download via my iPhone it only gives me a Pages 1.6 or something like the version.  ?

    I have pages 4.1 on my iMac and they tell me I have to download Pages for my iPhone to store in iCloud, etc; but when I go to the Apple Store to download via my iPhone it only gives me a Pages 1.6 or something like the version.  ? 

    Thank you.  So it is ok to download the different number.  Also, someone just emailed me saying that iCloud is really not a storage.  Does one have to get SugarSync, etc. then?

  • Where can I download other language for N95? And h...

    Where can I download other language for N95? And how?
    Thanks

    You can't.
    Nokia care points can add languages for you.

  • Patch download via wget fails for some patchid's

    Hi,
    downloading via wget(1) from http://sunsolve.sun.com/private-cgi/pdownload.pl?target=<patchid> fails with "ERROR 404: Not Found" for certain patchid's (i.e. 119689 or 125081), for these, one now has to specify also the patch's revision (i.e. 119689-04), it seems like patchid links to its latest patches are missing. (btw, I've also mention this along with other patch problems in another post at the administration/maintenance forum)
    Would there be a reason/explaination for this?
    Thanks.

    Please note this forun is for issue with Sun Update Connection-System / Hosted, Patch Manager & PatchPro software products. To get help with wget please use the from below:
    http://sunsolve.sun.com/show.do?target=feedback_form

  • Can't download via the direct link for IE (HTTP 403 Forbidden)

    Win7 Pro SP1 32-bit
    IE 10.0.9200.16635
    When I try to download/install from  http://get.adobe.com/flashplayer/ I get the "cannot contact reliable source", so I then tried the Direct link for ActiveX/IE:
    http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_ax.exe
    and I get a HTTP 403 Forbidden. I have also tried that link in Firefox and Opera, but all I get is an empty page. I've also tried with antivirus off, firewall off etc... no luck.
    BUT... If I try the second direct link(Plug-in/All other browsers)
    http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe
    it works in both IE, Firefox and Opera.
    Then I started up an old XP PC just to compare, and the download ActiveX version were succesful.
    Why doesn't the direct link for ActiveX work on my Win7 PC, regardless what browser I use?
    (I have never had any problems with updating/installing Flash Player before, on any computer including my Win7) 

    Maybe I was unclear: The "Direct Links" I referred to, ARE the offline installer links.
    The link Flash Player for ActiveX (Internet Explorer) doesn't work(forbidden access),
    but the link Flash Player Plug-in (All other browsers) works.
    BTW, is there perhaps any other URL to a offline installer, besides the one that doesn't work on my PC?
    (http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_ax.exe)
    Added screenshot of trying to download offline installer

  • Sync via GPRS

    Hi all.
    Did anyone performed a sync via GPRS?
    I am using MAU on Psion with PPC2003 and my sync is running endless.
    The data were reset on the client befor syncing so it is a fully download.
    In netwaver Administrator I can see that the sync is finished after 2 minutes and this was one hour ago.
    When I look into the data folder I do not see any SyncBo related files.
    Any ideas?
    Cheers,
    Sascha

    Hi Karthick.
    I am sorry I do not know all the details. This is all managed by the clients company.
    As far as I know the client has a contract with E-Plus which is a large service provider (mobile phones) in germany. So they get SIM cards which are installed in the devices. The mobile phone numbers of these cards are then registered at the services provider side and the client side to define which numbers are allowed to access the connection thrue the access point.
    To reach the access point the provider sets up something like a vpn tunnel which can be access by the registerd SIM cards.
    I do not know the costs, sorry.
    On the device you have to enter the access point and user data in the connection profile for you SIM card / GPRS.
    So you should contact some service providers located in you country to find out how everything is set up and how much it costs.
    Cheers,
    Sascha

  • Synchronization via GPRS not stable

    Hi all,
    we're working on MI 7.0 SP11 with MAU 1.0. For synchronization we will use cradle as well as GPRS. Using cradle, sync works fine. But when we sync via GPRS, the connection doesn't seem to be stable.
    Since a loss of connection causes the device to sync endless, we set the following parameters:
    MobileEngine.Sync.TerminateConnectionEnabled true
    MobileEngine.Sync.ConnectionTimeout               180000   (3 minutes)
    MobileEngine.Sync.WaitForResultsTimeout         1800000 (30 minutes)
    MobileEngine.Packaging.Activated                      TRUE
    MobileEngine.Packaging.MaxPackageSize          2
    Still we're not really happy with synchronization via GPRS. Terminating connection seems to work only between upload and download and timeout doesn't really work as well.
    Does anyone have experience with sync via GPRS and is willing to share her/his knowledge on that topic? Any help is appreciated.
    Thanks an Best Regards,
    Uwe

    Hi Karthik,
    we're working with Vodafone cda (CorporateDataAccess). We use the same access for quite a lot of employees with mobile mail and intranet access (Nokia Communicator). With that, I haven't heard about any problems regarding reliability.
    We were able to reproduce the sync problem yesterday. What we found out, is that the sync stops after sending the outboud file. The device then usually waits for the inbound file. In our case, the inbound file is received but the mobile device doesn't recognize this. Is get's stuck in the following loop and then just stops (doesn't refresh the screen anymore):
    [20070613 08:55:12:261] D [MI/Sync                  ] End: Dumping file /MI/sync/HOERTER.U/out/package.out
    [20070613 08:55:12:265] I [MI/Sync                  ] Outbound file size for user HOERTER.U is 20087
    [20070613 08:55:12:268] P [MI/Sync                  ] Do not use http proxy (system properties update)
    [20070613 08:55:12:281] P [MI/Sync                  ] Use following gateway for synchronization: http://sapwie.xxxxxx.de:8043
    [20070613 08:55:12:289] I [MI/Sync                  ] GzipDataCompression: Gzip data compression is switched on
    [20070613 08:55:13:001] P [MI/Sync                  ] Sending outbound file compressed to server.
    [20070613 08:55:13:020] P [MI/Sync                  ] Outbound file was compressedly sent.
    [20070613 08:55:20:944] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20070613 08:55:20:947] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20070613 08:55:20:951] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20070613 08:55:20:957] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20070613 08:55:31:221] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20070613 08:55:31:224] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20070613 08:55:31:228] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20070613 08:55:31:235] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20070613 08:55:41:511] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20070613 08:55:41:516] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20070613 08:55:41:519] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20070613 08:55:41:527] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20070613 08:55:51:827] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20070613 08:55:51:831] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20070613 08:55:51:835] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20070613 08:55:51:842] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20070613 08:56:02:146] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20070613 08:56:02:149] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20070613 08:56:02:153] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20070613 08:56:02:160] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20070613 08:56:12:462] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20070613 08:56:12:467] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20070613 08:56:12:471] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20070613 08:56:12:479] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20070613 08:56:24:954] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20070613 08:56:24:959] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20070613 08:56:24:963] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20070613 08:56:24:971] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20070613 08:56:35:347] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20070613 08:56:35:350] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20070613 08:56:35:353] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20070613 08:56:35:359] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    [20070613 08:56:45:757] D [MI/Core                  ] Set current application to 'MOBILEENGINE_JSP'
    [20070613 08:56:45:760] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:doGet(...) called
    [20070613 08:56:45:764] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:getEvent() done with event name = ''
    [20070613 08:56:45:770] D [MI/API/Runtime/JSP       ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
    In case of a successful sync, it should continue like this:
    [20070613 10:42:01:472] P [MI/Sync                  ] Receiving inbound file compressed from server.
    [20070613 10:42:01:674] P [MI/Sync                  ] Inbound file was compressedly received.
    [20070613 10:42:01:678] I [MI/Sync                  ] Inbound file size for user HOERTER.U is 26957
    [20070613 10:42:01:680] P [MI/Sync                  ] Synchronisation successfully connected
    [20070613 10:42:01:685] D [MI/Sync                  ] Begin: Dumping file /MI/sync/HOERTER.U/in/inbound.sync
    Any idea why the device stops? We have that problem with different devices so it shouldn't be related to modem or hardware. We also tried to change parameter icm/conn_timeout but that didn't really have an effect.
    Best Regards,
    Uwe

  • How to STOP syncing with Outlook via GPRS?

    I use an unlocked iPhone 3G with a prepaid mobile card.
    Everytime I open my Calendar function on the iPhone (just to see the days and dates) the iPhone attempts to sync over the air with my Outlook account calendar via GPRS.
    This costs a bomb on the prepaid card, and I want to stop the sync function.
    Would someone kindly tell me how to STOP the iPhone from syncing with my Outlook Calendar?

    If calendar events are synced over the air, this means you are accessing an Exchange account or a MobileMe account.
    If you don't want to sync calendar events over the air with the account, you need to turn Calendars off for over the air syncing for the account preferences on your iPhone. This will erase all calendars and calendar events from your iPhone and you will need to sync direct with a supported application on your computer via the iTunes sync process. If an Exchange account with Outlook on a Winblows PeeCee, this will not be possible.

  • Is there any way to get my music that I've downloaded via different apps or made via my MusicStudio to show up on my music app?

    I have been researching and trying different apps all night and I've ended up spending four dollars that I ended up wasting. I'm sure there's a very easy answer.  I have an iPad, it is the newest iOS software, my question is, is there anyway to get the music that I've downloaded on say Amazon or that I've made via my MusicStudio app to show up in my music on my iPad without having to then download it to my computer to get on iTunes to transfer from my computer to my iPad again?  I've got the music on my iPad, but both of the apps that I use to make a video with the music just use the native music app to search for the music on the iPad and shows the some 69 songs that I've either downloaded via iTunes or transferred from my laptop to my iPad. it won't show any of the other stuff that is on there. Is there any app that I could get that will help me to add music to my  native music app so we'll show up or is there anything I can do other then transferring it from iTunes on my laptop back to my iPad?
    Thanks.

    You will need to go via your computer's iTunes - to get music into the Music app you either need to download it directly on the iPad from the iTunes store app, or sync it from your computer's iTunes

  • I bought photoshop from pc world, it was a download via activation code my computer has broken and had to be replaced how do i re download program as i no longer have the scratch card

    i bought photoshop from pc world, it was a download via activation code my computer has broken and had to be replaced how do i re download program as i no longer have the scratch card

    you just need your serial number.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I purchased Adobe Acrobat XI Pro on a CD but didn't realize that my new computer doesn't have a CD drive. Is there a way to download via the web using the serial number on my CD?

    I purchased Adobe Acrobat XI Pro on a CD but didn't realize that my new computer doesn't have a CD drive. Is there a way to download via the web using the serial number on my CD?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

  • Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow

    hi all,
    i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
    not able to figure out the actual issue and how to solve it.
    can anyone suggest?
    below is the details of the short dump
    Short text
        Exception condition "UNKNOWN_TRANSCAT" raised.
    What happened?
        The current ABAP/4 program encountered an unexpected
        situation.
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
         exception
        condition "UNKNOWN_TRANSCAT".
        Since the exception was not intercepted by a superior
        program, processing was terminated.
        Short description of exception condition:
        For detailed documentation of the exception condition, use
        Transaction SE37 (Function Library). You can take the called
        function module from the display of active calls.
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "RAISE_EXCEPTION" " "
        "CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
        "SORT_TRANSACTIONS"
        or
        "CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
        or
        "SBIE0001 " "UNKNOWN_TRANSCAT"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
        3. If the problem occurs in a problem of your own or a modified SAP
        program: The source code of the program
           In the editor, choose "Utilities->More
        Utilities->Upload/Download->Download".
        4. Details about the conditions under which the error occurred or which
        actions and input led to the error.

    Hi,
    It seems like some routine are there and check your rotines , transformation etc.
    Regards
    sivaraju

  • New firmware update v20 for N95 8GB

    According to some sites the new firmware for the n95 8gb will have some good new features which will be out soon. here they are.
    Changes/improvements made from MCU SW 15.0.015 to version 20.0.016
    New features:
    • Automatic Screen Rotation (ASR)
    • Support for new combo memory added
    Browser:
    • Improvement when creating a voice call from WAP page.
    • Improvements to embedded video functionality in browser.
    • Sending email via browser flash plugin improvements.
    Messaging:
    • Mail in HTML format handling from Gmail IMAP server improved.
    Connectivity:
    • WLAN connection stability improvements
    • BT connection stability improvements with certain BT headsets
    • USB connection stability improvements
    Telephony:
    • Voice call handling improvements after certain type U.S.S.D message receiving.
    • Stability improvements to gallery for case when there s lot of content in Gallery
    • Improvements to switch application
    • Voicemail icon handling improvements
    Localization corrections:
    • Deletion of all contacts now possible even more than 6000 contacts in phonebook
    • Startup functionality improvements
    Message Edited by wah007 on 01-Apr-2008 10:24 PM

    05-Apr-2008 01:46 AM
    jericho wrote:
    So let us all hope that the sensitivity is just right or we have to wait for a new release to fix it or settle for 3rd party apps.
    So, V.20 for N95-2 isnt just an april fools joke?
    no its not a april fools joke. It is real.
    I hope it fixes the video stuttering as my phone does that too.
    Message Edited by wah007 on 05-Apr-2008 02:28 PM

  • Making pdf content downloadable via link in Iview problem

    Hi,
    I have been having problems with the following scripting code, where I have a link that when clicked makes a PDF file stored in the KM downloadable to the users local area.The file does download to the users desktop but when opened, the content is corrupt. So when a user clicks the view link the PDF document is loaded into the browser iframe with no issues. However when they click the download link they get the attached error.The file can be viewed properly through an  iframe in an iview on the portal but when downloaded via this script 'token missing' errors occur.
    I have pasted the code and would appreciate any help offered.
    Thanks
    Rebecca
    pResponse.write("<a onClick=\"blur(); downloadDoc('" + fileIds<i> +  "'); return false;\" href=\"javascript: void(0);\">");
                                       pResponse.write("<img src=\"" + docURL + downloadGif + "\" border=0 width=\"16\" height=\"20\" alt=\"Download\"></a></td>");
                                       pResponse.write("</tr>");
                             pResponse.write("</table>");
    Generate the link to use for file downloads
                             IPortalComponentURI componentURI = pRequest.createPortalComponentURI();
                             componentURI.setContextName(downloadPCDPath);
                             String uri = componentURI.toString();
                             pResponse.write("<script>");
                             pResponse.write("function downloadDoc(docToDownload)");
                             pResponse.write("{");
                             pResponse.write("document.getElementById('downprint').src = '" + componentURI.toString() + "?rid=' + docToDownload; ");
                             pResponse.write("}");
                             pResponse.write("</script>");
                             pResponse.write("<script><!--\n");
                             pResponse.write("function changeURL(newurl) {\n");
                             pResponse.write("this.location.href = newurl;\n");
                             pResponse.write("}\n");
                             pResponse.write("//--></script>");
                             pResponse.write("<iframe name=\"downprint\" src=\"\" style=\"width: 0; height: 0;\"></iframe>");
                        } //end if
                   printStyle(pResponse);
              } catch (AccessDeniedException ex) {
                   ex.printStackTrace();
                   mDbUtil.writeException(ex, pResponse );
              } catch (ResourceException ex) {
                   ex.printStackTrace();
                   mDbUtil.writeException(ex, pResponse );
              } catch(Exception ex) {     
                   ex.printStackTrace();
                   mDbUtil.writeException(ex, pResponse );

    I am not quite sure what this is supposed to be doing, however, a better method would be to have a custom component which accepts a RID to a resource. This component would then read the content of the PDF (using its bytes) and write these bytes out to the HttpServletResponse output stream. You need to make sure that the HTTP header content-disposition is also set correctly (can't remember exactly what this should be, however, a quick google search should return the correct results).
    This should be all you need to do I believe. Let me know if you need any help with this further
    D

Maybe you are looking for

  • User-defined fields in cost calculation

    Hi, I'm working with process order in customer service process. I would like to make a cost precalculation based on a user-defined field. To let you know. I created a new user-defined field. I affected to it a new parameter ID so that this user-defin

  • The steps to create a Web Service

    Does anyone have a recommended set of steps to follow to create a web service. These steps do not have to be full blown tutuorials. Simple one liners will do. For example, 1) Write the interface and methods 2) Write or generate the WSDL 3) etcetera..

  • EPrint capable ?

    Im new to this, so forgive me if Im incorrect in asking for advice on this forum and I should be somewhere else? I have just learned of the Google Cloud Print and need to know if anyone knows if my printer would be ePrint capable? I have an HP PSC 13

  • Failed to find element.

    Hi all, Some times while playback I am facing on issue like failed to find element. like Navigation failed:Failed to find element window(index=0).frame(name="contentFrame" | index=1).form(name="QUERYTEXTCOMPONENTS" | index=5).formelement[INPUT](index

  • Solaris 9 unable to detect HP LTO drives (Sun Storagetek SL500)

    Hi I have recently zone an LTO4 drive to my Solaris 9 server. I have done the following: i) Edit lpfc.conf on the FCP bindings & rebooted the server. ii) Add the below entry in st.conf file. Based on HP guide: tape-config-list = "HP Ultrium 4","HP Ul