Agreements Not Being Picked For SFTP Protocol in Oracle 11G

Hi Anuj ,
PFB the Details of the Issue :
Agreements are not being picked for SFTP protocol even though From TP , To TP , Document Type and Revision are picked correctly .
We are running on MLR11 , Version : 11.1.1.4.0 . Also we have set b2b.useCPAid to false in EM Properties so that Agreement is picked based on DocType Name , Revision and Partner Id's .
Also when we used File Protocol its working Fine . The problem exists for SFTP Protocol .
Error Code : B2B-50547
Error Description     Machine Info: (gwl09072appg084) Description: Agreement not found for trading partners: FromTP TestEbxml, ToTP BTGS with document type rqRequestServiceRequest-1.0-INBOUND.
Patch Level : 14114625
Regards,
Rohith

Hi Anuj ,
Thanks for the reply .
Yes we are setting the Filename Format explicitly in the LC . As far as we have understood , naming convention FromTP_MSGID.xml
is used to identify the TP and also MSGID is used to avoid duplicates and identification xpath is set to identify the Action .
When we are using %FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%_%TIMESTAMP%.xml , All parameters are identified as expected and Agreements are also being picked when we are using File Protocol . Only when we are trying with SFTP Prtocol , even though all values are being picked correctly , only agreement is not being picked . Could you please help ?
Regards,
Rohith

Similar Messages

  • File not being picked by adapter

    My Source file name is xml_a1_en.xml
    the test files are of name xml_a1_02_en_2010.xml , xml_a1_03_en_2010.xml
    the files are not being picked up by adapter..Is the naming convention wrong for the test files or any reason?

    Hi Mr.King,
    I am assuming your OS is Unix system right?
    If yes -> check the file permission?
    if Only Reading: permission should be 664
    Move the file after reading: 775
    Regards,
    Senthilprakash

  • Large files not being picked by FTP adapter

    Hello,
    In our integration scenario, files from the AS400 (legacy system) are placed at a FTP location from where the XI picks up the file for processing. We have FTP communication channel.
    The file has about 8000 records is in binary format. When the file was placed it was not being picked up after the mentioned polling period of 60 secs. After manually inserting about 300 records which makes the file size smaller, the file is picked up bu XI and processed without error. With the 8000 records the file size was 2.5 MB.
    Thank you

    Please provide a J2EE trace at logging severity "Debug" for the location
    "com.sap.aii.adapter.file". Please do the following:
    - increase logging severity to "Debug"
    - set log levels to ERROR for all components
    - ONLY set log level to DEBUG for "com.sap.aii.adapter.file"
    - reproduce the problem and gather the defaultTrace.trc immediately
      after you reproduce
    - remember to reset the logging severity after you have reproduced as
      leaving it on "Debug" can cause performance problems in your system.
    Also the ftp server logs will be needed in this case.

  • In Production Order Old Raw Material Batch No. not being picked (FIFO)

    Hi,
    We have activated Batch Management for ROH type of Materials with Split Valuation and the Strategy applied is FIFO.
    We have generated many such batches and consumed too, but lately out of many ROH mateials, 2 ROH who have Old Batches are not being picked and the Batch which is recently created is being picked at the time of Production Order Release.
    We have not done any changes into the Master Data nor the config during this period.
    Can anyone help what can be the issue ?
    Thanks in advance,
    Harris Panchal

    Hi,
    Actually our requirement is that we want to sort out the Batch as per the Earliest one and consume the earliest first, i.e. FIFO strategy.
    For that the MM Consultant has configured the following Charac:
    1. Stock Determination: Priority
    2. Value Assignment Type
    3. Batch Number
    Which I am feeling should be changed and to be as per the following:
    1. Created On
    2. Batch Number
    In OMCV, Classification is active with following option:
    4     Classification in foreground for new batches only for the following movements: 101, 309, 310, 561
    3     Classification always in foreground (all batches)   for the following movements: 321, 501
    Requesting your valuable inputs,
    Thanks and regards,
    Harris

  • What's the error?  Longtime site not being picked up by Google

    This site has been up for a year and is not being picked up by Google. What is the problem?
    Any suggestions much appreciated.
    www.elspethcameron.com

    +(sorry for my english, it usually is better than that I think/hope)+
    Ok... Let's see...
    www.elspethcameron.ca is just a forwarding url with cloaking (masking, masking the real url) enabled so it's not dynamic it doesn't change when visiting different pages. It is listed in google
    http://www.google.ch/search?hl=en&q=site%3Awww.elspethcameron.ca&btnG=Search&met a=
    but there is no content under this url because it is just forwarding visitors to the real website, just like a link would do that.
    The real website is, at least partially, on google with its content as you can see here
    http://www.google.ch/search?hl=en&q=site%3Aweb.mac.com%2Felspethcameron%2F&btnG= Search&meta=
    The other parts of the website are not indexed by google. I think that is because google is not able to crawl the nav bar because it is javascript rendering. You could make a second nav bar by your own and put it on the bottom of the page. Simply add a text field and put normal links in it to the other websites. Google will then follow them next time indexing your page.
    In addition to that you should watch the thread I posted before. Note that by making your sitemap you don't use www.elspethcameron.ca but the real url.
    Regards,
    Cédric

  • Ship-To Address not getting picked for one particular user

    Hi SRM Gurus,
    I am working on SRM5.0 system with ECC6.0 as backend.
    For one particular SRM user, the Ship-To address number which has been maintained in his attributes through transaction PPOMA_BBP, as default delivery address, is not populated when he creates a SC.
    This default ship-to address is not seen while creating the cart even though the address can be found via the F4 search help in the same SC.
    Can anyone tell me why this is happening for one particular user?
    Please note that this problem is occuring even when the user is shopping for self and creating a new SC (no copying from template). So SAP note 1055203 is not valid in my case.
    I have checked the ADRC table, and this address number exists. Infact, when I assign this address number to some other user's Ship-To attribute, this default delivery address is picked in the SC.
    So, I understand that the problem is not with the address, but with the linking of this address number to this user. I even tried deleting and re-assigning the address number in the attribute to this user. But, it doesnot work still.
    Can anyone help me out?
    Thanks n Regards,
    Ancy

    Ship to address not being picked from attributes for any user it was being picked from Org address data , and I had reset the value
    now , when I am trying to create a SC and I have tried to add delivery address  bby 2 types .
    1. By adding through the portal
    2> i have tried to add the same throgh ppomabbp in user attributes "Delivery address"
    I have also made it default however when I raise the SC it again shows me as blank :
    I am not too sure how do I populate the value that I need . Please see below still the delivery address is blank !!

  • TS1363 My new IPod is not being picked up by my computer.  What should I do?

    My new IPOD is not being picked up by my computer.  What should I do?

    @vic_suav, thanks for the additional information. Could you please try to see if this does the trick?
    Quit iTunes on your PC, switch your iPhone on and make sure it's not locked, before connecting it to your computer. Then wait a minute or two until the "Download Photos" dialogue box pops up. When that happens, launch iTunes and wait a minute or two until iPhone shows up as a connected device.
    If the above doesn't work, follow the steps in 'How to restart the Apple Mobile Device Service (AMDS) on Windows' to restart the Apple Mobile Device Service, here: http://support.apple.com/kb/TS1567
    Otherwise, please try a different USB port on your PC. Then in your Windows 7, click Start and choose Control Panel. Click "Uninstall a program". Then verify that Apple Mobile Device Support is visible in the list of currently installed programs. If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. For removing and reinstalling iTunes, QuickTime, and other software components for Windows Windows 7, follow these steps: http://support.apple.com/kb/HT1923
    if all of the above fail, you can try some of the troubleshooting steps outlined in 'iOS Device not recognized in iTunes for Windows' article: http://support.apple.com/kb/TS1538
    Let me know how it goes. Good luck!

  • Delivery document not being picked while creating shipment document

    Dear All,
    Issue is regarding creation of shipment document.
    As i am creating shipment document in VT01N, am unable to get the delivery doc . ie., delivery document is not picked in shipment creation.
    I have created a sales order, picking is completed n saved, PGI not yet been done.
    Am unable to create a shipment document due to delivery document not being picked.
    i/p's will be of great help.
    with regards,
    Vijayashree

    Dear all,
    The issue is solved.
    As the Route was not picking in Sales Order so the delivery was not picked in shipment creation.
    Route determination setting was not correct.
    Regards,
    Vijayashree

  • Item in sales order not being picked into picking list

    Hi Gurus,
    Could you please tell me the possible reasons as why an item in the sales order which has enough stock not being picked into the picking list?
    Many Thanks
    Choudry

    Hi
    Delivery creation that is selection date is controlled by the schedule line of the line item in the sales order
    Try by changing the schedule lines in sales order in VA02
    there you try to change the delivery date to past
    It might be possible if you had enough stocks at that time
    Regards
    Raja

  • Suppliers which are active and not being involved for a long time

    Hi All,
    Is there any way we can find suppliers which are active but not being used for a long time (for a specific duration) . i.e being involved in no open POs or no invoices processed or no payments made.
    Please advice.
    Thanks

    Hi Abhi,
    I have created some queries for the same. COuld you help me if I am going in the rite direction.
    I have created a query to find the suppliers which are not being used in the POs for the past one year by using the below query: But for invoices and payments to be included, I am finding it a bit difficult....need help..............
    --FINAL QUERY                                  
    SELECT vendor_id, vendor_name, creation_date, last_update_date
    FROM po_vendors v
    WHERE v.end_date_active IS NULL
    AND v.enabled_flag = 'Y'
    AND NOT EXISTS (
    SELECT 1
    FROM po_headers_all h
    WHERE h.vendor_id = v.vendor_id
    AND h.creation_date(+) BETWEEN (SYSDATE - 365) AND (SYSDATE))
    ORDER BY vendor_id DESC
    Is it possible to send me the program so that it would be helpful for me to use it.
    email: [email protected]
    Help Greatly appreciated.
    Thanks
    Aman

  • HT1807 I am out of the country. I turned my cellular data off and connected to wiFi . However, it is still showing that i am connected to a network.  How dan i be sure that i am not being charged for roaming?network , I am still showing a network

    I am out of the country. I turned my cellular data off and connected to wiFi . However, it is still showing that i am connected to a network.  How can i be sure that i am not being charged for roaming?

    Make sure data roaming and cellular data is turned off.  If you don't want to receive calls or SMS then put your phone in airplane mode and reactivate WiFi

  • Fairly new battery not charging after not being used for a while

    My computer (Elitebook 2530p) has not been used for a while, perhaps a month or two. The battery used to hold for over 3 hours of light use.
    Now, the battery won't charge with the message "0% available (plugged in, not charging)"
    I can't find a battery refresh utility in the BIOS, or any way to interact with the battery. Is there something I'm missing? Should the battery just go dead after not being used for a while?
    Update: fixed typo

    I've run the HP battery check and got the code REOOW. Battery is dead, and I am out of warranty. I can't think of any possible reason why this should have happened.
    What does this code (REOOW) mean?

  • Notifications are not being generated for any emails that have rules applied to them.

    Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

    In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
    that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria.  PLease check
    1) whether your rule has trun on alert supression
    2) Close the alert, craised by rule,  and do it again
    Roger

  • [svn:osmf:] 14928: Fix bug FM-468: Initial and max indices not being respected for RTMP MBR.

    Revision: 14928
    Revision: 14928
    Author:   [email protected]
    Date:     2010-03-22 17:35:43 -0700 (Mon, 22 Mar 2010)
    Log Message:
    Fix bug FM-468: Initial and max indices not being respected for RTMP MBR.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-468
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/net/NetStreamSwitchManager.as
        osmf/trunk/framework/OSMFTest/org/osmf/net/TestNetStreamSwitchManager.as

  • Programs which are not being executed for a specific period

    Hi,
    We are planning to do the application upgrade in few months,with respect to that we would like to find out what all programs/transactions(standard or custom) which are not being executed for a specific period.What is the way to find this?
    Regards,
    Sam

    Hi Sam,
    You can use st03 and defice theprograme name and period to sotp the activity.
    Regards,
    Anil

Maybe you are looking for