Agregated value in original report in not same as the drill down report

Hello experts,
I have a issue with the drill down reports.
Agregated value in the main report is not equal to the agregarated value in the drill down report.
In my report I have a sales for jan 2011,feb 2011 so on
For jan 2011 it is some thing $56000
when I click on this amount it giving the detail level for each region sales and at the end it is giving the total sales for jan 2011 as $98000
My question is why there such difference in the total amount when we are drilling down?
Please help me in this regard. I am new to obiee.

hello
do you have any filters on this report that would related to measures?
if so, remove these filters and see if you still get different values;
rgds

Similar Messages

Problem in accessing the drill down report via RRI

Hi guru's,
          ThanX in advance for all the stuff you are providing.
I have a problem with the drill down report.I have two reports Q1 and Q2 where Iam navigating to Q2 from Q1 via RRI.But when I try to drill down to the Report Q2 It gets into an unending state of query execution(to say shortly it gets struck).
This report was working fine earlier.But very Recently I encountered this problem.I started debugging the query at RSRT.For the report Q1 just goes fine but when I drill down to Q2 it gets struck.This is the part of code where the report end up in an unending state.Infact it gets struck exactly while calling the method...
"CALL METHOD g_sx_buffer-r_request->read_data"
Fetch the data, using the wait command only with the second parse
    IF g_s_session_prptys-use_wait = rs_c_false
      OR i_mode = rrx1_c_grid_get_mode-wait_fetch.
Is data available
CALL METHOD g_sx_buffer-r_request->read_data
        EXCEPTIONS
          x_message     = 8
          no_processing = 1.
      CASE sy-subrc.
        WHEN 1.
    Necessary for drill to level
     raise no_processing.
        WHEN 8.
          RAISE x_message.
Can Some one help me out to know what happens at this part of code that is causing the error.
ThanX A Lot,
Regards,
Sukumar

Its better you raise an OSS message on this problem.

Report Painter - cannot hide an element selected for the drill-down report

Dear Experts
I am using report painter to modify a report by trying to hide a row but getting the following error.
You cannot hide an element that you selected for the drill-down list
Message no. K7186
Diagnosis
You cannot hide elements that have already been selected for the drill-d
System Response
The function was canceled.
Procedure
Deselect the relevant row or column from the drill-down list.
It says to deselect the relevant row from the drill-down list, but not able to find out how do i do it.
kindly please help me to solve it
thanks in advance
Suresh

Hi,
If you are asking me whether i am trying to hide the row in the report painter form or in the output of the report, then, yes i am trying it in the report painter.
I copied this standard form '0SAPRATIO-01' for Cash Flow statements-Indirect method(tcode FSI5) and trying to modify the copied one. I tried to hide an existing row but it gave me the above message.
any help?
Suresh
Edited by: rasuresh on Aug 10, 2010 12:44 PM

[Extend DBI] specify the drill-down report for the custom report column

Hi,
I realized two custom reports by using the extend DBI tools:
1st report displays the sum of invoices amounts grouped by Operating Units.
2nd report display the details of invoices for all Operating Units
In the 1st report I specified a link on the column Operating Units to drill-down at 2nd report.
The problem is how specified the drill-down link so that the 2nd report display only the detail of invoices for the selected Operating Unit?
Thanks.

Adding the time dimenstions like Year, Quarter, Period, Week is quite possible.
Steps would be:
1. make sure your data source (Table/View has these columns). If you don't have them you can generate them by joining the date of the data table with FIII_TIME_DAY.
2. Map these new columns to appropriate Dimesnions. (Lile Enterprise Year, Enterprise Quarter etc.)
Once you have done these two your report will work for the Time Dimensions.
I dont think its possible to get the Prior Period functionality unless you use a generated datasource.
Regards,
Sudeep

User can't open the drill down report in EIS

Hi Everybody,
Please help me from this problem.I am using EIS for DRILL DOWN Report generating.But few user can't able to do the report.
Please show the path how i can resolve the issue.
Regards,
999

What kind of error message (if any) are they getting when they attempt to use the drill through?

Question on the drill down report in BI Answers

In BI Answers, I can drill down a summary report based on the hierarchy defined in the Repository. For example, I have a hierarchy of 5 levels, level 1 to level 5. Now column level 1, level 2, and level 3 are shown and clickable. Click on level 1, level 4 column and data is shown. But level 4 column is shown after level 1 instead of after level 3. Is it possible that when click on level 1 , level 4 column will appear after level 3?

Don't post the same question twice...
Is rollup possible in BI Anwsers report?

Drill-down to line items in drill-down report (FGI0)

Dear All,
I have a problem regarding executing drill down report in FGI0
When executing the drill down report FGI0 , I try to drill down to the line items from Goto-> line items but it's deemed & I can't run it.
I searched a lot and found only one link but didn't help
Customized drill-down report cannot go to line item level (FGI4 and FGI1)
Please help as it's very important issue

this is due to authorisation limit.
Ithink you do not have the access to view the 2009 GL balances.

Drill down report issues

Is there a solution for displaying fields only on the drill down report with out it displaying on the top main report.
Main report columns:
case id casename location Assignee Asigneegroup
when i click on case id drill down report appears
Drill down report columns:
Task id taskname Assignee assignee group
my question is that i dont want to see Assignee and assignee group on the main report, I just want to see those columns on drill down report. If i remove those 2 columns on the main report (drill up report), then those columns are not appearing on the drill down report as well.

i think a drillfilter will solve the problem
try to add a column and add drillfilter in this column
good luck
Amr

Unable to create a drill through or drill down report

Hello I am new to report builder (or any SQL related tools) and I am still learning to do a many things.
Background: I have managed to design a pie-chart report that shows Number of Assets, and when they were maintained. The fields I have for the table seven columns
Asset ID (e. 123456), Accepted On Date(dd/mm/yyyy), Last Serviced on Date(dd/mm/yyyy), Min. Service interval per year (e.g 1,2,3,4) Overall Risk Score (between 0-16), Risk Category (e.g Green or Orange), maintenance
Compliance (e.g Compliant or No Proof)
I get an extract in .rdl format from our Asset Database (CRM) which includes Asset ID, Accepted On Dates, Last Serviced on Date, Min Service Interval per year, Overall Risk Score
I add calculated field of Risk Category as Orange or Green, where an overall risk score > 8 will make the Asset ID fall in the Orange Category and any risk < 8 will be Green Category
The second calculated field is the Maintenance Compliance, where I have added formula when certain conditions between Accepted On Date(dd/mm/yyyy), Last Serviced on Date(dd/mm/yyyy) and Min. Service interval per year, are
met. When they are met, it is "Compliant", when not met it is "No Proof".
The pie chart has
Values as Count(Risk Category)
category Groups (Risk category) + (Maintenance Compliance)
Probelm: I am trying to design a drill down or a drill through report where if I click on the slice, the table displayed below will only contain values (or rows) corresponding to that region. So, if I click on Green - Compliant,
then a table should appear which shows only asset values which have Risk category value Green and Maintenance Compliance Value as Compliant
Please let me know if anyone can help     (Link Copy Paste in browser: https://drive.google.com/file/d/0BzjF_kUloVtkSUk0YlZDbFVYR3c/edit?usp=sharing)
Note: I am doing this report offline, as the server connection does not work. So i usually edit the .rdl file and then upload it to the server to check if it runs

Hello Alisa
Thank you for the response. I tried doing the following, and I am pretty sure I must be doing something wrong because of my inexperience with SQL tools.
But I get an error while I try to upload it onto the server. I have uploaded my files here
https://drive.google.com/folderview?id=0BzjF_kUloVtkSjhCd3J6VU11alk&usp=sharing
Is it possible to check these. The files are (.rdl file, error log text file, screen shot of error when uploading to server)
Also, in your explanation you mentioned
Add a dataset (DataSet1) in the report with the corresponding fields (when I try to add another data set(DS1) with the values shown in DSMain (my main report), it does not allow populate the query fields of the main report (DSMain). So I have to manually
add all query field + the two calculated fields (Risk_Category & Maintenance_Compliance). Add another dataset (DataSet2) with RiskCategory, MaintenanceCompliance two fields (I added another Dataset and named it as DS2, and copied the same Calculated
fields from DSMain (main report) for Risk_Category & Maintenance_Compliance
Add two parameters (RiskCategory, MaintenanceCompliance) in the report, get these Available value from DataSet2 fields.( two parameters appears new
RiskCategory --> Dataset-DS2, Value Field- Risk_Category, Label Field: Risk_Category
MaintenanceCompliance --> Dataset-DS2, Value Field- Maintenance_Compliance, Label Field: Maintenance_Compliance
3. Add two filters of DataSet1. Please refer to the following values:
Expression: [RiskCategory]
Operator: =
Value: [@RiskCategory](I am not sure I have clearly understood this part. As my values in Dataset 1 (DS1) are the same as the main report (DSMain), the query + calculated fields are the same. Hence my Dataset 1 (DS1) will also have a Calculated field
as Risk_Category and Maintenance_Compliance. And do I have to add these values as filters in DataSet2 (DS2) ? In which am actually manually typing Expression: [RiskCategory]
Operator: =
Value: [@RiskCategory]
Expression: [MaintenanceCompliance]
Operator: =
Value: [@MaintenanceCompliance]
Main Report
3. Add the subreport below “Specify a report”. (I had to give a random name as 'DrillThrough' in this field. Am I doing something wrong)
4. Click Add icon to add parameter to run the subreport. Please refer to the following values:
Name: RiskCategory (Note: This is parameter name in the subreport.)      Value: RiskCategory
Name: MaintenanceCompliance         Valeu: MaintenanceCompliance
(I had to manually type the Name & Value fields, as they did not appear in the drop down list when I click on add)
I am sure by now you must have realised how amateur I am with this tool
Please let me know
Thank you once again for being patient
Silent_Tracker

Adding a characteristics to AR Drill down report for line items

I have raised an OSS note on this, but they deem this to be consulting.
I have an AR drill down report for line items
It calls the structure RFRRD20.
I need to add a value into the characteristics so I can use it in the drill down report.
I have appended the structure, added a value in TKAF for the field, and it still does not show.
Has anybody done something similar?
I am sure this is easy, but only when you know how, so if you know how to do it please can you let me know.
thanks
Mark

Hi Mark
    I am also in the same situation where i need to add two characteristics (invoice date, due date) to the AR drill down reports. I added them to the structure and TKAF table as you did, but still could not get them to the drill down reports (FDI5 or FI1).
   From your posts, i see that SAP's response was that it is not possible to add characteristics to AR drilldown reports? Did they mention any reasons or OSS notes? How did you handle your requirement, were you able to work around?
   Your suggestions would be highly appreciated.
Thanks
Vamsi

Multi-Use Drill Down Reports?

Hi,
I'm just starting out with reporting in SSRS so this may be a silly question but I'm struggling to find a way to do what I want :)
I have a large graphical report with several top 10 reports on different a cube. (eg. top 10 number of events, top ten numbers of computers affected)
I want drill down reports for both the Event Name and Computer Name, also to be able to click on the header of the report and get a complete unrestricted report. I have created a drill down report that has all the data and if I choose one item (say computer
name) I can drop down to the drill down and filter the table in that with the computer name and return any results for that computer. I cant figure out how to have a secondary link that passes a wildcard to returns all results. I'd also like to have the ability
to send an event name to the same drill down and a wildcard for the computer name. However I cant figure out how to get the filter on the table to accept any wildcards.
I dont want to have to create multiple reports for each of the different drilldowns, is this possible? (Easy to understand answers for a newbie if possible :) )

Hi Chris_C2000,
If I understand correctly, you have configure “Go to report” action in your report. It is Drillthrough in SSRS. You want to pass a value link to the corresponding report. We can add parameters in the drillthrough report, then pass parameters values to the
report.
I have create a simple report in my test environment. Suppose we have the same dataset (DataSet1) in main report and subreport with two fields: CalendarYear, SalesAmount. Please refer to it.
Subreport:
Add a table in the report body, fill with CalendarYear, SalesAmount fields.
Add another dataset (DataSet2) with CalenderYear field.
Add a parameter (CalenderYear) get Available Values from DataSet2 CalenderYear field.
Add filter in the DataSet1, with values below:
Expression: [CalenderYear]
Operator: =
Value: [@CalenderYear]
Main report:
Add a chart in the report, fill SalesAmount in the Values dialog box, CalenderYear in the Category Groups dialog box.
Right click the bar in the chart, click Series Properties.
Click Action in the left pane. Select “Go to report” option.
Select the subreport below “Specify a report” prompt.
Click Add icon below, and fill with following values:
Name: CalenderYear Value: [CalenderYear]
Then, when we preview the report, we can click the specific bar link to the subreport get the corresponding data.
Reference:
http://technet.microsoft.com/en-us/library/aa337477(v=sql.105).aspx
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Drill down reports from Before Report Trigger

Hallo,
I am using reports 6.08 and I want to run several subreports from the parameter form of a master report. However when I call srw.run_report() from the Before Report Trigger with batch=no I get the error message ... When I use batch=yes I cannot use destype=srcreen. When I use the same call from a button trigger it works fine.
How can I call a drill down report from the Before Report Trigger?
The master report should not create a report itself; only the drill down report should be visible. How can I exit the master report without raising an exception after running the drill down report?
Thanks a lot - Ulrich

Ulrich,
The only place where it is valid to call a report using srw.run_report() with a destype=Screen (or Preview) is from a button of an already run report (to provide drill down capabilities).
In your situation where you're really only using Reports as a parameter form (in the master case) I would suggest that you look to use a real Oracle Form as the master driver, and run_product calls to generate the required reports.
Hope this helps,
Danny

Copy/export a drill down report created by CXR0 in PRD

Hi Gurus,
I am trying to copy/export a drill down report created by CXR0 in PRD ( can not move transport from PRD to QAC, transport doesnot allow ) to QAC and DEV, is there any other way to export / import , download /upload option to transfer report or form from the drill down report.
Please help

Hi Amit,
I think you are right, I got same type of information from other basis source that drill down report cannot be exported or imported, only way to move by transport.
Still I wait for your confirmation,
Al Mamun

Unable to pass parameter from a hyperlink in drill down report

Hi,
I have created a drill down report.
Master report has a column with hyperlink
with url to call detail report.
"http://webserver/dev60cgi/RWCGI60.EXE?item+the_prodid=200376"
when i see the detail report i get the value of the_prodid parameter as null.
any help will be highly appreciated.

Thanks very much.
It worked for me also.
Now i am getting here something new
i have wrriten a function which returs javascript and i this is being passed to report using before report trigger.
I am using
SRW.SET_BEFORE_REPORT_HTML(SRW.TEXT_ESCAPE,HTML_Text) tag to do this.
When i run this report from report builder it works fine but when this is invoked from
a report server i get a blank page and the window status says tranferrring data from webserver nothing comes up.
Now when i remove the contents of before report trigger it works fine.
my before report trigger conetenst are
function Before_Report return boolean is
HTML_Text VarChar2(32000);
begin
HTML_Text := '<html> ' | |chr(10)| |
mainpagejavascript| |
'<body dir=LTR bgcolor="#ffffff">'| |chr(10); -- for 6i the body tag dir=&Direction would work and be set at runtime
SRW.SET_BEFORE_REPORT_HTML(SRW.TEXT_ESCAPE,HTML_Text);
return (TRUE);
end;
mainpagejavascript function returns
<script language="javascipt">
function test()
alert("I have a problem");
</script>
can anybody help me out in this.
Thanks in advance
shailesh
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Haithem Abdelkefi:
Yes, the drill down works.
We have a field with this Format Trigger.
function F_EQP_GRPFormatTrigger return boolean is
begin
srw.set_hyperlink (:p_url| |'&report=INP-A2.2.rep&p_eqp_grp='| |:eqp| |'&desformat='| |:desformat);
return (TRUE);
end;
Haithem<HR></BLOCKQUOTE>
null

HTML Drill Down Report

Hi,
I am using CR4E Ver 2.0.11.r1346.
I am producing HTML drill down report. My code for the same looks like..
CrystalReportViewer crystalReportViewer = new CrystalReportViewer();
                    crystalReportViewer.setOwnPage(false);
                    crystalReportViewer.setPrintMode(CrPrintMode.ACTIVEX);
                    crystalReportViewer.setReportSource(reportClientDocument.getReportSource());
                    HttpServletRequest request = (HttpServletRequest) parameters.get("httpServletRequest");
                    HttpServletResponse response = (HttpServletResponse) parameters.get("httpServletResponse");
                    String htmlContent = crystalReportViewer.getHtmlContent(request, response, request.getSession().getServletContext());
                    output.setContent(htmlContent.getBytes());
For some reasons, I can not use
crystalReportViewer.processHttpRequest
My code generates the HTML report as expected but the drill down reports do NOT work. I tried to inspect and got that the HTML generated by
getHtmlContent
does not have the script tag
event.js
. I added this script manually in generated content and tried to debug through, but it does not work.
Any clues?

Thanks.
I tried using
processHttpRequest
This generates the same report but Drill down does NOT work.
The code in my action class is...
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
//Get the report source object that this viewer will be displaying.
IReportSource reportSource = (IReportSource)(httpServletRequest.getAttribute("ReportSource"));
if (null != reportSource && servletContext != null) {
     viewer.setReportSource(reportSource);
     //Render the report.
     viewer.processHttpRequest(httpServletRequest, httpServletResponse,
               servletContext,
               null);
Any clue?

Agregated value in original report in not same as the drill down report

Similar Messages

Maybe you are looking for