Agriculture Project - Advise and help needed

Dear Gurus,
I have done extensive preparation work for a project in Agriculture which is based on a cooperative model type from a SD module point of view (5 companies will share means of productions, labour, harvests), those 5 companies will rent the land divided into parcels to another 2 organisations that will not exploit the land but just rent it. 1 of those 2 companies will be trading from a SD perspective with suppliers to buy and sell production.
I am looking for help and advise on how to best implement sales processes in SD.
Being new to this forum and having never worked on an agricultural project, I am not sure if this forum is the best to get ideas, help,and why not set-up an online working group. So if I got mistaken, I apologize in advance and would kindly ask you to put me in the right direction.
Alternatively, I would be very interested to hear where I can get best practices in implementing SD within a cooperative agricultural environment.
Obviously, should you be interested and have some experience in the area above mentioned, I will be happy to give you more details.
Kind regards
Christian

Dear Christian,
You do not have to go to specific details of your process. The generic process can be dealt here.
As a process owner, if you feel the processes are really unique, please let me know so that I can check this with concerned stakeholders of the forum.
This might be of interest to them as the industry vertical here is new.
Do let me know in case of any concerns.
Regards,
Rakesh

Similar Messages

  • I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

    I need advise and help with this problem .
    First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
    At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
    In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
    Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
    trace in Spotlight , Library . Nothing could be find .
    Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
    ''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
    With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
    I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
    Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

    Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
    To remove it, see:
    http://www.thesafemac.com/arg-genieo/
    Do not use the Genieo uninstaller!

  • My project index is pointed to the wrong project library and I need to change it.

    My project index is pointed to the wrong project library and I need to change it.

    All content from the store is tied to the account that downloaded it, so if you download those apps then it should be showin your account's id - if you've updated the email address on your account and it's showing the pre-update email address then try logging out of it on the iPad by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.
    If you haven't changed your email address then has anybody else downloaded or synced apps to your iPad ? If they have then only their id will be able to download updates to them

  • Opinions and help needed Pls.

    I am seeking some opinion and help.
    I need to setup and control both 9i and 10g databases using EM.
    The 9i databases will also be DataGuarded . I have successfully tested this using 9i EM with a repository
    and Intelligent Agents and the DataGuard Wizard to create logical standby databases. An interesting experience.
    Now that our first 10g database is in development, I would like to control it in a similar fashion. It will 'go' production
    in November and will also need to be DataGuarded.
    I am aware that each 10g Instance can have it's 'own' web interface, but to use the Dataguard wizard, I will need to use Grid control.
    Q1. Can someone confirm or refute that Grid control, with it's own applicaton server & DB instance, is permitted
    without ANY additional licenses at all, provided it is being used to control
    other fully licensed EE databases only?
    Q2. As 10gR1 Grid was the first release of the product, and we will be controlling 10gR2 databases (apparently patch 10.1.0.4 can do it),
    do YOU think we should use 10.1.0.4 GC now,
    or just use the 9i EM product and 10g Dataguard Broker command line tool 'DGMRGL' (not tested here yet), and wait for the 10gR2 GC hopefully early next year?
    Below are all the processes that were started by installing 10G grid (10.1.0.3) in Solaris 64.
    I will be attempting to apply the 10.1.0.4 EM Grid patch to this and controlling a 10.2.0.1 DB.
    I have successfully connected to the Grid Control ("as is" installed 10.1.0.3) using netscape.
    ( initially using http://localhost:7780:em which automatically became http://dandrutl02:7780/em/console/logon/sdk/incompatible;jsessionid=c0a89b1fce6b5d53d63770647e38909ad251f1b02be.n65In79Pr6KKaxCNaN0McybtahyM-x4Qc2SLbhiIaN4Iah1vbA5zawSLa3mPn39AahqQb2SHbQnAnwb5pBfzqB1Molbzhk5Imkrzqx0In65In79Pr6KKawaLaxiKc3uPbxeM8OexhOaOgzX5hgbynknvrkLOlQzNp65In0__ ) Click ok a few times.....
    Eventually I get to "http://dandrutl02:7780/em/console/logon/logon" and can login OK.
    I have successfully installed an agent for 10g GC on a remote host, and can control it from the Grid host. It could control
    a 9.2.0.7 instance on the remote host. 10.2.0.1 is also installed on the remote host but no Db has been created yet.
    Now, can someone tell me the commands I need, - and the correct order - to:
    Q3. Stop all Grid Web, application server, database, and local agent processes on the Grid host.
    Q4. Start-up of same.
    Q5. Start and stop of processes for the Grid Agent on the Remote agent host.
    Q6. What is the preference for the installation order of the 10g Agent and Oracle 10gR2 software ?
    Grid master processes
    ============
    /data/oracle/product/10.1.0.4EM/opmn/bin/opmn -d
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    ora_qmn0_REPOS10
    /data/oracle/product/10.1.0.4EM/jdk/bin/java -Xmx256m -Doracle.ias.sysmgmt.logg
    /data/oracle/product/10.1.0.4EM/bin/tnslsnr LISTENER -inherit
    ora_dbw0_REPOS10
    ora_lgwr_REPOS10
    ora_pmon_REPOS10
    ora_reco_REPOS10
    /data/oracle/product/10.1.0.4EM/opmn/bin/opmn -d
    ora_smon_REPOS10
    ora_cjq0_REPOS10
    ora_ckpt_REPOS10
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/jdk/bin/java -server -Djava.security.policy=/da
    /data/oracle/product/10.1.0.4EM/webcache/bin/webcached -A -OPMN -U 1250885641
    /bin/sh -c /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/rotatelogs /data/o
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/rotatelogs /data/oracle/produ
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/rotatelogs /data/oracle/produ
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /bin/sh -c /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/rotatelogs /data/o
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/rotatelogs /data/oracle/produ
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/jdk/bin/java -server -Xnoclassgc -Xmx256m -DORA
    /data/oracle/product/10.1.0.4EM/perl/bin/perl /data/oracle/product/10.1.0.4EM/b
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/bin/emagent
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/jdk/bin/java -server -Djava.security.policy=/da
    oracleREPOS10 (LOCAL=NO)
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    ora_j000_REPOS10
    ora_j001_REPOS10
    ora_j002_REPOS10
    ora_j003_REPOS10
    ora_j004_REPOS10
    ora_j005_REPOS10
    /bin/sh /data/oracle/product/9.2.0.6/bin/dbsnmpwd
    /opt/local/sbin/sshd
    /data/oracle/product/9.2.0.6/bin/dbsnmp
    oracleREPOS10 (LOCAL=NO)
    oracleREPOS10 (LOCAL=NO)
    oracleREPOS10 (LOCAL=NO)
    oracleREPOS10 (LOCAL=NO)
    oracleREPOS10 (LOCAL=NO)
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    oracleREPOS10 (LOCAL=NO)
    -ksh
    oracleREPOS10 (LOCAL=NO)
    /data/oracle/product/agent/bin/emagent
    oracleREPOS10 (LOCAL=NO)
    oracleREPOS10 (LOCAL=NO)
    /data/oracle/product/agent/perl/bin/perl /data/oracle/product/agent/bin/emwd.pl
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/webcache/bin/webcached -OPMN -U 1250885643
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    /data/oracle/product/10.1.0.4EM/Apache/Apache/bin/httpd -d /data/oracle/product
    oracleREPOS10 (LOCAL=NO)
    ora_j006_REPOS10
    oracleREPOS10 (LOCAL=NO)
    oracleREPOS10 (LOCAL=NO)
    Grid AGENT host processes
    ==========
    /data/oracle/product/10.1.0.4EM/bin/emagent
    /data/oracle/product/9.2.0.6/bin/tnslsnr LISTENER -inherit
    -ksh
    /data/oracle/product/10.1.0.4EM/perl/bin/perl /data/oracle/product/10.1.0.4EM/b
    /opt/local/sbin/sshd

    Thank you for the reply, it go me working. Now some additional info and questions.
    On a monitored host were I have both 9.2 and 10.2 databases installed, I was attempting to use just the 10.2 listener and the 10.1.0.4 agent to monitor everything. This worked.
    I Installed 9.2 , 10.2 and 10.1.0.4 Agent software and started a 10.2 listener and 10.1.0.4 agent on a second Unix host.
    But, when I attempted to set up a 9.2 DataGuarded logical databases to the second host, it failed and as far as I can tell it seems to be expecting that I will use a 9.2 listener for 9.2 DB's and a 10.2 listener for 10.2 Db's. (The errors were related to attempting to execute lsnrctl commands against wrong listener version).
    Can someone confirm that Oracle expects that you will use multiple listeners (on different ports of course)?
    I have also had some odd behavior from the 10g Grid application, only corrected by ending the session and restarting, but I am assuming that this is because Grid is still a relatively new product.
    For clarity, I list the order of installation below. Can someone check that I have done it right?
    host 1
    Install 9.2.0.1 software.
    Install Patches to same to get to our production level (9.2.0.4)
    Install several patches related to EM and CritialPatchUpdates etc.
    (as an aside, EM 9.2.0.6 with a management repository will control the above fine)
    Install 10.2.0.1 software
    Created a 9.2 and 10.2 test DB's.
    Configure 10.2 listener for all Db's
    host 2
    Install 9.2.0.1 software.
    Install Patches to same to get to our production level (9.2.0.4)
    Install several patches related to EM and CritialPatchUpdates etc.
    (as an aside, EM 9.2.0.6 with a management repository will control the above fine)
    Install 10.2.0.1 software
    management host
    Install 10.1.0.3 grid control to new database
    (Installes AS , creates a 9.0.? Db for the repository, Agent etc)
    Install 10.1.0.4 grid patch to grid home
    Install 10.1.0.4 grid patch to agent home
    host 1
    Install 10.1.0.3 grid agent
    Install 10.1.0.4 patch to agent
    host 2
    Install 10.1.0.3 grid agent
    Install 10.1.0.4 patch to agent
    Whew! And Oracle thinks this is easy?
    I am seriously considering using 9.2 EM and OMS for the DataGuard on 9.2 Db's only and 10G's database broker command line interface for the 10.2 stuff and banning use of 10g Grid control 10.1.
    I Need a 10gGrid control 2.01 more stable, reliable, simpler, NOW.
    Migrating a 9.2 OMS and repository to 10g Grid when it becomes usable will need to be possible.
    You thoughts?

  • Im doing my final year project here and i need help- karasi

     my name's karasi and im from singapore..currently doing my final year at nanyang polytechnic..diploma in electronics, computer and communications engineering..im new to this labVIEW software as my supervisor just gave me this..my supervisor will be giving my project details next week and im pretty sure tht i really do need alot of help in this to pass my final year project..so any kind helpers who would wanna help me in this would u pls kindly email me at [email protected] thnk you..
    Solved!
    Go to Solution.

    The PCR here is used to monitor and analyze the temperature of the substance. I'm supposed to make a user interface with 4 display of graphs overlapping each other. And the buttons are used to control which graph should come up first. Once when a button is shown, the button should greyed out. I've attached on an example that my supervisor gave me on how it should look like. Thanks! 
    Attachments:
    imgA.jpg ‏75 KB

  • Need some advise and help Transferring files one mac to other

    I have created quite a problem for my self and can not seem to get out of it.
    I transferred my system from the G4 to the new Intel IMAC. Ended up with two accounts on the new Intel IMac. Was told to go to user/ and transfer files from one account to the other. Lost all of my files. Can not get the netscape back on with my bookmarks, Safari does not have any of my stored bookmarks, Quicken, Family Reunion are locked. Have done the permission repair. Still messed up.
    To add to this, I than decided to retransfer from G4 to Intel IMAC, but can not establish a target disk using Firewire. Follow the instructions holding T down and the screen comes up saying to reboot or shut down, it will not go to the target mode. And it does not appear that the G4 has a firewire extension now, it did two days ago. Can any one help?

    The Windows drive is probably formatted NTFS which is not natively writable
    by the Mac. It should be formatted as FAT32 to be usable on both.
    Dave

  • Project advice and help

    Hi all,
    I am going to start on my project for my master program. I was wondering if anyone can help me?
    i  need to know what I can use that is low cost.
    I will be using labview 8.0. I need to communicate with a hardware of anytype.
    what i have in mind is probably a camera, video or something. or even a tv screen/dvd player.
    the idea i have is to read those videos into labview and do some type of compresssion or something.
    i dont know where to start. dont know what pci to use. does anyone have an idea?
    please help me..
    thank you in advance
    Best regards,
    Krispiekream

    Hi there
    I'm not sure what to advise as your description seems a little vague.
    You say you would like to read signals into labVIEW. This sounds great, you can do loads of great stuff in labVIEW with Vision though I would ask do you have the vision toolkits for labVIEW 8.0 or Vision Assistant,  Vision Builder?
    For more information on these I would recommend you look at http://www.ni.com/vision/software.htm
    Hardware - you would like to communicate with hardware of any type?      TVs etc are passive so these yyou cannot easily communicate with image-wise. I think a camara is your best bet though again the method of receiving your signal is somewhat imaterial for this you could just use a saved vidio file. How exactly do you want to compress it?
    If you can give me slightly more clarity then I will try and advise.
    best regards
    Message Edited by GrahamG on 11-29-2007 05:44 AM
    Graham Green
    Technical Marketing Engineer
    National instruments UK & Ireland

  • HT4623 I do not updad iPad, Apple ID and my Password is disabled. Please advise and help enable

    Habibullah Allah Yar.
    Kabul Afghanistan.
    Head of Green Shaheen Group of Company's.
    <Personal Information Edited by Host>

    Note, your personal info out in the open makes it easy for someone to try to steal your identity.  Plus you have spammed the board with it over and over again.  Please don't make more work for the moderators by constantly posting it.
    If you are having trouble with an Apple ID, see https://iforgot.apple.com/password/verify/appleid and that will help get it reset.  If you mean something else, please try to find someone who can better translate your needs.

  • Flash project audio button help needed

    Hi,
    I am just learning Actionscript 3 and trying to create buttons that turn a previous sound off before they turn a new one on. Also I want a button on the front that turns all sound off if it is pressed. I have attached my files in a zip folder.
    The problem is all of my buttons which are inside movieclips just control the one sound. I have a couple more to do. I understand I will need an if statement but somehow I have to control all sounds and I don't quite get it.
    I would really love someone to point me in the right direction. I cannot find a tutorial anywhere and am going crazy.
    I look forward to someones reply,
    Jan

    Jay Robinson2 wrote:
    I've just upgraded to Logic 7.2 as I bought an intel Mac. However, for some reason the audio plays through the macs built in speaker. I've got into preferences>audio>drivers and changed the driver to 'built in line input' but it's still playing through the speaker itself. I never had this problem while i was running previous versions on my old mac
    When i boot up logic it does say something that i've never seen before which could be the cause...' Project Manager database on disk has got wrong version. Rescanning required'.
    Any ideas?
    G5 2.8 Quad Mac OS X (10.5.5)
    Hi,
    Try updating to 7.2.3
    As far as the Manager... try doing a new expanded scan, overnight. This will update the database.
    As far as the built in driver... you are selecting an INPUT.... and you expect it to change the OUTPUT??? Again, you are selecting an INPUT, while expecting the OUTPUT to change.
    The Built in drivers have only 1 output available, And in your case, that is working as expected. When you want to RECORD via either input, that is when you change the driver. You should have two choices : Mic, and Line.
    Cheers

  • Logic needed and help needed in BAPI..

    Hi,
    I am looking 2 BAPI's for posting an accounting doc in GL.
    BAPI_ACC_DOCUMENT_POST
    BAPI_ACC_GL_POSTING_POST
    But in the above mentioned BAPI's I dont find any posting key field.
    Here my scenario is to use the posting keys 40 and 50 for posting's.
    Can any body suggest me how to approach for this.
    Thanks in Advance.
    Message was edited by: KDeepak
    Message was edited by: KDeepak
    Message was edited by: KDeepak

    Hi
    I changed my code to create three documents:
    TABLES: bapiache09, mard.
    DATA: t_items  LIKE STANDARD TABLE OF bapiacgl09 WITH HEADER LINE,
          t_amount LIKE STANDARD TABLE OF bapiaccr09 WITH HEADER LINE,
          t_result LIKE STANDARD TABLE OF bapiret2   WITH HEADER LINE.
    DATA: belnr TYPE belnr_d,
          gjahr TYPE gjahr.
    DATA times TYPE n.
    DO 3 TIMES.
    Header Data
      bapiache09-comp_code   = 'ZN01'.
      bapiache09-doc_date    = sy-datum.
      bapiache09-pstng_date  = sy-datum.
      bapiache09-doc_type    = 'PV'.
    bapiache09-ref_doc_no  = 'BAPI Test'.
      bapiache09-username    = sy-uname.
      bapiache09-bus_act     = 'RFBU'.
      MOVE sy-index TO times.
      CONCATENATE 'BAPI TEST N.' times INTO bapiache09-ref_doc_no.
      REFRESH t_items.
    First Item
      MOVE 1 TO t_items-itemno_acc.
    Account number
      t_items-gl_account = '0012440130'.
    The posting key are 40/50 by default, if you need different keys, set
    the transaction business code here: check hits of table T030B to see
    the link between transaction and posting keys
    *accountgl-acct_key   = 'ACC'. <----
      APPEND t_items.
    Second Item
      MOVE 2 TO t_items-itemno_acc.
    Account number
      t_items-gl_account = '0012440140'.
    The posting key are 40/50 by default, if you need different keys, set
    the transaction business code here: check hits of table T030B to see
    the link between transaction and posting keys
    *accountgl-acct_key   = 'ACC'. <----
      APPEND t_items.
      REFRESH t_amount.
    Set amount
      MOVE 1 TO t_amount-itemno_acc.
      t_amount-currency = 'EUR'.
      MOVE 1000 TO t_amount-amt_doccur.
      APPEND t_amount.
      MOVE 2 TO t_amount-itemno_acc.
      t_amount-currency = 'EUR'.
      MOVE 1000 TO t_amount-amt_doccur.
      t_amount-amt_doccur = t_amount-amt_doccur * -1.
      APPEND t_amount.
      REFRESH t_result.
    check posting
      CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
        EXPORTING
          documentheader = bapiache09
        TABLES
          accountgl      = t_items
          currencyamount = t_amount
          return         = t_result.
      LOOP AT t_result WHERE ( type = 'E' OR
                               type = 'A' ).
        EXIT.
      ENDLOOP.
      IF sy-subrc <> 0.
        REFRESH t_result.
        CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
          EXPORTING
            documentheader = bapiache09
          TABLES
            accountgl      = t_items
            currencyamount = t_amount
            return         = t_result.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      ENDIF.
    Print Message
      LOOP AT t_result.
        WRITE: t_result-message.
    Get Number
        IF t_result-id     = 'RW' AND
           t_result-number = '605'.
          belnr = t_result-message_v2(10).
          gjahr = t_result-message_v2+14(4).
        ENDIF.
      ENDLOOP.
    ENDDO.
    Just as you can see, I insert my code into DO/ENDO cycle and so I re-call the BAPI three times.
    In this situazione I posted document 3 documents and the field AWKEY is correctly filled.
    Max

  • Design Help - Cartoon Lion and Profile - Opinions and Help Needed

    Hey guys!
       FIrst of all, you rock, like all of you! This is one of the best online communities, I always get great help quickly. Thanks!
    Here is what's up, I am creating a "Children's" book for my wife and my one year aniversary (I know, puke, right?). Anywho, one of the charachters is a Lion (Named Louis, if you are interested). I have a great face and body for him but I am not sure about the profile shot... I can't tell if I am being a perfectionist or if it just sucks... What do you all think, what would you do differently? Thanks!
    Here are the PNG's
    Here are links to full size images and PNG's if you really want to dig in. You will notice that everything is layered, this is because I want to work with these as base sprites and then change facial expressions and what not from page to page.
    Lion.png
    Profile-Lion.png
    Lion.PSD
    Profile-Lion.PSD
    Thanks again!

    Ok... here he is with the snout... it certainly looks more realistic, but I am afraid it does not match the art style of the orrigianl where he is facing us. What do you guys think?

  • Creating bootable EXTERNAL HD - advice and help needed please

    Hi all,
    First of all I hope this is the right place to put this topic, if not then please move it to the right place.
    Right, now my problem.
    As I have a few programs that do not work with Snow Leopard yet, but do with Leopard, I wanted to know if it is possible to create a bootable HD (partition) on my external HD without losing all the data that is on there now? I have a 1TB external drive on which I would like to do this, and then install OSX Leopard on it to be able to use the software that is not Snow Leopard compatible yet.
    The software I am talking about is most of the Line 6 software like the Variax Workbench
    Thanks in advance and best regards
    Peter

    If there's ample free space on the ext HD to hold what's on the int HD, then this is the way to do it quickly and not lose anything currently on the ext HD. These steps assume that the ext HD is formatted as Mac OS Extended.
    1. Download and install Carbon Copy Cloner (CCC).
    2. Double-click on the ext HD's Desktop icon, select list view in the Finder window that pops up, CMDSHIFTN (creating an untitled folder), uniquely rename that folder (e.g., Don'tTouch), and put everything currently on the ext HD into that folder.
    3. Launch CCC, select the internal HD as source, select the ext HD as target, select, Backup Everything, uncheck the +Delete items that don't exist on the source+ option, click the Clone button, enter your admin username & password, and click OK.
    4. When CCC reports back with a good cloning, quit CCC, launch System Preferences->Startup Disk->select the ext HD, and click Restart.
    5. If the machine successfully boots with the clone on the ext HD (select Apple icon->About This Mac->Startup Disk->"name of ext HD"), then ensure that it looks and operates exactly like the original did.
    6. Launch Disk Utility, select the int HD, and erase and repartition it to suit your needs.
    7. Launch CCC and reclone the clone to its int HD volume.
    8. Install Leopard onto another int HD volume, include those Leopard-only apps, and you have a dual-boot int HD, but only have the SL volume backed up. As others have noted, you need to consider backing up the other stuff on the ext HD (in "Don'tTouch") and providing for a clone of the new Leopard installation.

  • Advise and help pls

    hello illustrators.
    im trying to achieve the blue symbol going around propotionally around the eclipse with out it having it distort dramaticly,how can i do this?i also would like
    it so seem mapped on it with the bending as its going around.

    hello jacob!
    yes the pattern brush did the trick!!!!i treid to blend and replace spine but it was aweful.the pattern brush wored out better after spacing out the symbol.
    thank you

  • I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

    I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

    Yea I am. I deleted Logic Pro 9 and moved the App to the Trashcan like normal. Then when I go to install it, it says its already Installed. When I do this with other apps; it works fine, the install thing comes back up like it should once you have deleted the app

  • I in need of oracle project costing,project billing and project management setup documents? can you please help me.

    I am in need of project costing and project billing and project management setup documents with screen shoot? Can anyone help me?

    I have no clue about recovering the info, but when you say you save you should always use Save As. That clears unneeded info from the file. With the file size you have, that may be an important need.

Maybe you are looking for