AGTCTL - Heterogeneous Agent error 28591

I am currently trying to load the agent control program on a SPARC, oracle 10g enviroment, but it keeps failing with the message:
$ agtctl
AGTCTL: Release 10.2.0.1.0 - Production on Thu Jul 17 15:47:21 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ORA-28591: agent control utility: unable to access parameter file
ORA-28591: agent control utility: unable to access parameter file
I have since assigned both the variables the error talks about:
$ echo $TNS_ADMIN
/export/home/oracle/product/10.2.0/db_1/network/admin
$ echo $AGTCTL_ADMIN
/export/home/oracle/product/10.2.0/db_1/hs/admin
Can anyone shed some light on how I get the agent control program to work?

Eric,
Thanks for opening the new thread, it is easier to work on the problem.
Your configuration is not correct.
In initODBCEXCEL.ora you have -
set ODBCINI=/asis/mis/oracle11g/product/11.1.0/db_1/hs/admin/initODBCEXCEL.ora
but this should point to an odbc.ini file on the Linux system that has details of the ODBC driver that is used for the connection.
As far as I know there is no ODBC driver for Excel available for Linux but I may be wrong.
But, for the connection to work you need an ODBC driver for Excel installed on Linux and then refer to it in the configuration.
Have a look at this note in My Oracle Support -
How to Setup DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX) (Doc ID 561033.1)
If you don't have an suitable ODBC driver on Linux then this won't work.
If there is no driver for Excel on Linux then you could install DG4ODBC on the Windos machine where Excel is installed and connect to the gateway there from your RDBMS on Linux.
See these notes depending on your Windows version -
How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit (Doc ID 466225.1)
How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on 64bit Windows Operating Systems (Doc ID 1266572.1)
There should be an Excel driver on the Windows machine where it is installed, or you should be able to download it from Microsoft.
Regards,
Mike

Similar Messages

Multi Mapping - BPM - Block 1 ( No Agent ) Error -- Help Please ?

I am trying the the BPM scenario using Integration Process
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00 in
the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
I am using a File Sender Adapter and Receiver Adapter .
It is Successfully picked up the File but nothing is happening after that .
I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
I have checked in SWWL my Integration Process Return code is "0"
Can you please tell tell me how to solve this ?
Can you please tell me this scenario is like Multiple Purchase Order Items to One Purchase Order
Here they have given ID adn OverAllNumber . For ex. In one xml file I am sending
ID as A100
OverAllNumber as 120
next 5 minutes putting the another file with contents
ID as A100
OverAllNumber as 130
My Question is
Will TWO files wiil come as Output in File Receiver or one file merged as like follows ?
ID as A100
OverAllNumber as 120
ID as A100
OverAllNumber as 130
I am not Clear in this please give some suggestions .
Best Regards.,
V.Rangarajan

Hi Raj,
          Thanks for ur reply.
While defining the receiver determination, sender agreement, receiver agreeement , Interface determination which Interfaces areu using?
                   Yes
+ by the way which pattern u are following the basis component , is it BpmPatternCollectMessage?+
              No . I have taken example as
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00
in the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
The steps Which i have followed in BPM are
1. Block with Deadlkine branch and Exception handler( as TimeOut Exception)
Block Start and Block End as New Transaction
2. Inside Block infinite Loop which contains Receive step ( Actives the Correlation ) and Multiline Container element which appends the Messages with CollectMessage
3. Transformation Step
It creates the New Transaction and Interface Maping from CollectMessage List to New Mesage
4. Send Step
               It sends the New Message . It creates the New Transaction .
Best Regards .,
V.Rangarajan

Block1 (No agent) Error in BPM ?

Hi friends ,
 I am trying the the BPM scenario using Integration Process
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00 in the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
I am using a File Sender Adapter and Receiver Adapter .
It is Successfully picked up the File but nothing is happening after that .
I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
I have checked in SWWL my Integration Process Return code is "0"
Can you please tell tell me how to solve this ?
Can you please tell me this scenario is like Multiple Purchase Order Items to One Purchase Order
Here they have given ID adn OverAllNumber . For ex. In one xml file I am sending
ID as A100
OverAllNumber as 120
next 5 minutes putting the another file with contents
ID as A100
OverAllNumber as 130
My Question is
Will TWO files wiil come as Output in File Receiver ?
 I am Clear in this please give some suggestions
Best Regards.,
V.Rangarajan
Best Regards.,
V.Rangarajan

Hi,
 Thanks for your reply.
 once the files are connected in the transformation step you will use a N:1 mappping.
 Yes , i have done as same . I have set deadline as 15 minutes .
My doubt is
 if N:1 
First File
ID as A100
OverAllNumber as 120
next 5 minutes putting the another file with contents
SecondFile
ID as A100
OverAllNumber as 130
 Then what will be the output ?
 will it be like this
 ID as A100
 OverAllNumber as 130
 I am not clear in this Please tell me !
 If possible please give some suggestion to clear this Block1 (No agent) Error in BPM ?
Regards.,
V.Rangarajan

JAM Agent ERROR: Can't connect to Console 141.144.184.78:3600: Connection r

Hi
I am trying to connect to AD4j , but I am getting the following error during server start up.Please help me in resolving the issue.
JAM Agent ERROR: Can't connect to Console 141.144.184.78:3600: Connection refused
JAM Agent: Port is 62751
Pandu

Check accessibility of ports 3600 and 62751 if you have a firewall

Oracle 10.2.0.4 Agent error

Users,
Any idea on solving below agent error which is throwing for all versions of DB's:
Thread-120121 WARN recvlets.aq: Duplicate threshold key instance_throughput.logons_ps. for [oracle_database <sid>]
Oracle On HPUX
Monitored Targets Agent: 10.2.0.4
Monitored Targets DB: 9.2.0.3, 10.2.0.3, 11.1.0.7
Cheers,

Hi,
hava look there maybe it helps you
Re: Agent errors
Regards,
Tom

(No Agent) Error

Hi Experts,
I have done a BPM in my system. There is no error in the design and configration. A work Flow was created for My BPM . When i try to execute the BPM it is not successful . When i go and check the work flow , the first step itself has a error saying (No Agent) Error . What is a agent ?
Do i have to assign it for every work flow ?
How do i solve this issue ?
Regards,
Vignesh

Hello Perumal,
Please check in transaction SXI_CACHE if your IP return code is 0. If not then re-import your BPM into Integration directory again.
Go to Transaction SWWL and delete the Work Item related to this BPM and then execute your interface again.
If the problem still persists you can refer to workflow diagnostic transaction SWUD.
Note: Apply OSS note on SP20. 1017845
With Regards,
Vidya

No Agent Error in WS50000041

hi Experts,
I have a similar problem as given in this link below
No Agent Error in WS50000041
plz give me a valid solution.

Hi,
Check the OM side.
Trigger the rule of 0168 and find out whether it can able to find the correct manager or not.
If it fails then the workflow will not work. In order to make the 0168 work. you need to assign the manager for the employee correctly.
Thanks
Yogesh

Failed to start e-TEST agent: error starting agent: \ne-TEST process ...

Hi,
wihout changing the version or so we suddenly we experience the following error at status page (although the monitored web-page is fine):
Current alert: Failed to start e-TEST agent: error starting agent: \ne-TEST process has not established socket in 30 seconds.
Any ideas?
Thanks in advance

Hi emposadi,
It looks like the e-Load server is having trouble communicating with the agent. Are you running the load test using an agent on the same machine or remote machine? You might want to see if a process has grabbed a port that the server communicates with the agent on. I would reboot the machines in question, shut down the Empirix Application Server and verify that ports 1099 and 9001 are not in use. Those are the ports that e-Load uses to communicate with the agent.
-GateCity_QA

Orphaned Agent Error - Unexpected Agent Exit. Code = 128

Hello,
I am currently running tests using the Load Testing Tool bundled with Oracle Application Testing Suit, to run performance tests for a web services application. Everything was running smoothly until I tried to run a total of 2000 users (200 users across 10 agent machines), which started to cause the tool to return "Orphaned Agent" errors ("Unexpected Agent exit. Code = 128" or "Unexpected Agent exit. Code = 1"). The Orphaned Agent errors aren't occuring right away, after user ramp up, it can be another 5 minutes or so before they are actually occuring. CPU and memory usage on the agent machines is not being maxed out (approx 30% usage).
I am using build 8.50.0260 of OATS.
I have checked the EmpStart.log file, and I am getting the following exception:
ERROR [EmpStartMain] oracle.oats.empstart.PortListener
java.io.EOFException
at java.io.DataInputStream.readInt(Unknown Source)
at oracle.oats.utilities.DHAgreementHelper.performKeyAgreement(DHAgreementHelper.java:159)
at oracle.oats.utilities.SecureServerSocket.accept(SecureServerSocket.java:41)
at oracle.oats.empstart.PortListener.readFromSocket(PortListener.java:121)
at oracle.oats.empstart.PortListener.run(PortListener.java:84)
at java.lang.Thread.run(Unknown Source)
ERROR [EmpStartMain] oracle.oats.empstart.PortListener
java.net.SocketException: Software caused connection abort: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(Unknown Source)
at java.net.SocketOutputStream.write(Unknown Source)
at java.io.DataOutputStream.write(Unknown Source)
at java.io.FilterOutputStream.write(Unknown Source)
at oracle.oats.utilities.DHAgreementHelper.performKeyAgreement(DHAgreementHelper.java:156)
at oracle.oats.utilities.SecureServerSocket.accept(SecureServerSocket.java:41)
at oracle.oats.empstart.PortListener.readFromSocket(PortListener.java:121)
at oracle.oats.empstart.PortListener.run(PortListener.java:84)
at java.lang.Thread.run(Unknown Source)
Hopefully someone can point me in the right direction :)
Michael

Hi Alex,
Thank-you for your prompt response. I reduced the number of agents I was using to 5, with 400 users on each (2000 users total). I then changed the Tools > Options > Scenario Defaults to use Java Mode and updated the maximum heap size to both 512 and 1024, however the error still occurs.
Here is the log from one of the agent machines
INFO | jvm 1 | 2009/11/24 15:47:38 | INFO [AgentProcess] Launched process 3753803 for agent agId12902_rnd1409932225
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [AgentProcess] Exited process 3753803 for agent agId12902_rnd1409932225
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [ProcessRunner] Agent x33620:1099:queue/AgentPoolNotificationQueue:agId12902_rnd1409932225 exited, code = 128
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Messenger Loaded....
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Try server=x33620:1099 queue=queue/AgentPoolNotificationQueue
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Got ConnectionFactory
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Got queue queue/AgentPoolNotificationQueue
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Created queue connection.
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Created queue session.
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Connected to server=x33620:1099 queue=queue/AgentPoolNotificationQueue
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Try server=x33620:1099 queue=queue/AgentPoolNotificationQueue
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Got ConnectionFactory
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Got queue queue/AgentPoolNotificationQueue
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Created queue connection.
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Created queue session.
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Messenger] Connected to server=x33620:1099 queue=queue/AgentPoolNotificationQueue
INFO | jvm 1 | 2009/11/24 15:52:03 | INFO [Request] [Host:x33620;Port:1099;Requestor ID:null;Requestor Key:JBOSS-x33620-1099;Requestor Queue:queue/AgentPoolNotificationQueue;Request ID:131;Request:stopagent;] - authentication successfull
INFO | jvm 1 | 2009/11/24 15:52:03 | ERROR [EmpStartMain] Unknown agent ID: agId12902_rnd1409932225
So it looks as though the memory is OK, however, for some reason half-way through the test the agent ID becomes unknown. This error is the same across all the agents.
Thanks in advance,
Michael

MSS: No Agent Error - WS50000041-urgent

Hi All,
In MSS, in Personal Change Request, when I am triggering work flow WS50000041, it gives an error in workflow, that is
"No Agent Error".
Do anyone have any idea how to rectify this issue.
Its urgent
Thanks
Rohit G

Hi Rohit,
Please have a look over the note 646601 in this regard.
Best Regards,
Deepak...

Heterogeneous 11g Error

Hi,
I am trying to configure HS for Excel file. I am getting following error:
SQL> select table_name from all_tables@ODBCEXCEL;
select table_name from all_tables@ODBCEXCEL
ERROR at line 1:
ORA-28513: internal error in heterogeneous remote agent
ORA-02063: preceding line from ODBCEXCEL
Heres my setup:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit (Linux)
Excel file (ODBC "ODBCEXCEL" setup in Windows XP)
initODBCEXCEL.ora
HS_FDS_CONNECT_INFO = ODBCEXCEL
HS_FDS_TRACE_LEVEL = Debug
#HS_FDS_SHAREABLE_NAME = <full path name of odbc driver manager or driver>
#HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so
# ODBC specific environment variables
set ODBCINI=/asis/mis/oracle11g/product/11.1.0/db_1/hs/admin/initODBCEXCEL.ora
tnsnames.ora
ODBCEXCEL =
(DESCRIPTION =
 (ADDRESS_LIST =
 (ADDRESS = (PROTOCOL = TCP)(HOST = SG6666i1)(PORT = 1521))
 (CONNECT_DATA =
 (SID = ODBCEXCEL)
 (HS = OK)
listener.ora
(SID_DESC =
(SID_NAME = ODBCEXCEL)
(ORACLE_HOME = /asis/mis/oracle11g/product/11.1.0/db_1)
(PROGRAM = dg4odbc)
TNSPING
[oracle11@asistest hs]$ tnsping ODBCEXCEL
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-JUL-2012 15:56:55
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
/asis/mis/oracle11g/product/11.1.0/db_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = SG6666i1)(PORT = 1521))) (CONNECT_DATA = (SID = ODBCEXCEL)) (HS = OK))
OK (0 msec)
Heres the output from ODBC Tracing
dg4odbcODBCEXCE 1e88-1cd4 ENTER SQLAllocHandle
SQLSMALLINT 1 <SQL_HANDLE_ENV>
SQLHANDLE 00000000
SQLHANDLE * 01E5FFD4
dg4odbcODBCEXCE 1e88-1cd4 EXIT SQLAllocHandle with return code 0 (SQL_SUCCESS)
SQLSMALLINT 1 <SQL_HANDLE_ENV>
SQLHANDLE 00000000
SQLHANDLE * 0x01E5FFD4 ( 0x01b21c18)
dg4odbcODBCEXCE 1e88-1cd4 ENTER SQLSetEnvAttr
SQLHENV 01B21C18
SQLINTEGER 200 <SQL_ATTR_ODBC_VERSION>
SQLPOINTER 0x00000003
SQLINTEGER -6
dg4odbcODBCEXCE 1e88-1cd4 EXIT SQLSetEnvAttr with return code 0 (SQL_SUCCESS)
SQLHENV 01B21C18
SQLINTEGER 200 <SQL_ATTR_ODBC_VERSION>
SQLPOINTER 0x00000003 (BADMEM)
SQLINTEGER -6
dg4odbcODBCEXCE 1e88-1cd4 ENTER SQLAllocHandle
SQLSMALLINT 2 <SQL_HANDLE_DBC>
SQLHANDLE 01B21C18
SQLHANDLE * 01E5FFD8
dg4odbcODBCEXCE 1e88-1cd4 EXIT SQLAllocHandle with return code 0 (SQL_SUCCESS)
SQLSMALLINT 2 <SQL_HANDLE_DBC>
SQLHANDLE 01B21C18
SQLHANDLE * 0x01E5FFD8 ( 0x01b21cc0)
dg4odbcODBCEXCE 1e88-1cd4 ENTER SQLSetConnectAttr
SQLHDBC 01B21CC0
SQLINTEGER 102 <SQL_ATTR_AUTOCOMMIT>
SQLPOINTER 0x00000000
SQLINTEGER -5
dg4odbcODBCEXCE 1e88-1cd4 EXIT SQLSetConnectAttr with return code 0 (SQL_SUCCESS)
SQLHDBC 01B21CC0
SQLINTEGER 102 <SQL_ATTR_AUTOCOMMIT>
SQLPOINTER 0x00000000
SQLINTEGER -5
dg4odbcODBCEXCE 1e88-1cd4 ENTER SQLFreeHandle
SQLSMALLINT 2 <SQL_HANDLE_DBC>
SQLHANDLE 01B21CC0
dg4odbcODBCEXCE 1e88-1cd4 EXIT SQLFreeHandle with return code 0 (SQL_SUCCESS)
SQLSMALLINT 2 <SQL_HANDLE_DBC>
SQLHANDLE 01B21CC0
dg4odbcODBCEXCE 1e88-1cd4 ENTER SQLFreeHandle
SQLSMALLINT 1 <SQL_HANDLE_ENV>
SQLHANDLE 01B21C18
dg4odbcODBCEXCE 1e88-1cd4 EXIT SQLFreeHandle with return code 0 (SQL_SUCCESS)
SQLSMALLINT 1 <SQL_HANDLE_ENV>
SQLHANDLE 01B21C18Please help. Many Thanks!
Regards,
Eric

Eric,
Thanks for opening the new thread, it is easier to work on the problem.
Your configuration is not correct.
In initODBCEXCEL.ora you have -
set ODBCINI=/asis/mis/oracle11g/product/11.1.0/db_1/hs/admin/initODBCEXCEL.ora
but this should point to an odbc.ini file on the Linux system that has details of the ODBC driver that is used for the connection.
As far as I know there is no ODBC driver for Excel available for Linux but I may be wrong.
But, for the connection to work you need an ODBC driver for Excel installed on Linux and then refer to it in the configuration.
Have a look at this note in My Oracle Support -
How to Setup DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX) (Doc ID 561033.1)
If you don't have an suitable ODBC driver on Linux then this won't work.
If there is no driver for Excel on Linux then you could install DG4ODBC on the Windos machine where Excel is installed and connect to the gateway there from your RDBMS on Linux.
See these notes depending on your Windows version -
How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit (Doc ID 466225.1)
How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on 64bit Windows Operating Systems (Doc ID 1266572.1)
There should be an Excel driver on the Windows machine where it is installed, or you should be able to download it from Microsoft.
Regards,
Mike

OBIEE 11g (11.1.1.6) Agent Error : Error Codes: AGEGTYVF

Hi Team,
I have migrated an application from OBIEE 10g (10.1.3.4)
I am facing an error in some of the iBots (Agents) migrated to 11g. Is it related to any Oracle Bug??
I am using 11.1.1.6.0 in a Windows Server 2008 R2 Standard machine.
Here is the error detail:
Eventually succeeded, but encountered and resolved errors...
Number of skipped recipients: 1 of 2
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: oracle.xdo.template.fo.area.TableArea cannot be cast to oracle.xdo.template.fo.area.TableBody.
Error Codes: AGEGTYVF
Location: saw.rpc.mis.read, saw.subsystem.portal.pdf, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/administrator/Agents/Daily Reports
...Trying Agent Get Response Content loop again.... Sleeping for 8 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: oracle.xdo.template.fo.area.TableArea cannot be cast to oracle.xdo.template.fo.area.TableBody.
Error Codes: AGEGTYVF
Location: saw.rpc.mis.read, saw.subsystem.portal.pdf, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/administrator/Agents/Daily Reports
...Trying Agent Get Response Content loop again.... Sleeping for 4 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: oracle.xdo.template.fo.area.TableArea cannot be cast to oracle.xdo.template.fo.area.TableBody.
Error Codes: AGEGTYVF
Location: saw.rpc.mis.read, saw.subsystem.portal.pdf, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/administrator/Agents/Daily Reports
Exceeded number of request retries for method GetResponseContent.
-Pratim

Hi,
What resolution you had applied to resolve this issue?
Please share resolution with me as i am also facing. the agent is working file if select Excel,html etc.. the error with if i select PDF format.
Thank you,

System launchd agent error starting/stopping system processes

I installed PHP 5.4 via brew package manager. I kept the system Apache & configured it to work with this version of PHP rather than the system copy. I used launchctl (sudo launchctl load -w /System/Library/LaunchDaemons/org.apache.httpd.plist) to load apache automatically on boot. I created a Sites folder for Mountain Lion and opened http://localhost/index.php and got the standard PHP 5.4 system config page showing that everything is working fine. I checked my system logs just to be sure nothing was out of the ordinary and I am seeing these errors in my log even though everything seems to be fine and I am not seeing system crashes, slow runtimes, etc:
9/5/12 2:38:51.292 PM com.apple.launchd[1]: (org.freeradius.radiusd[3055]) Exited with code: 1
9/5/12 2:38:51.292 PM com.apple.launchd[1]: (org.freeradius.radiusd[3055]) Exited with code: 1
9/5/12 2:38:51.292 PM com.apple.launchd[1]: (org.freeradius.radiusd) Throttling respawn: Will start in 10 seconds
9/5/12 2:38:56.686 PM com.apple.launchd[1]: (org.isc.named[3056]) Exited with code: 1
9/5/12 2:38:56.686 PM com.apple.launchd[1]: (org.isc.named) Throttling respawn: Will start in 10 seconds
9/5/12 2:39:01.328 PM com.apple.launchd[1]: (org.freeradius.radiusd[3057]) Exited with code: 1
9/5/12 2:39:01.328 PM com.apple.launchd[1]: (org.freeradius.radiusd) Throttling respawn: Will start in 10 seconds
9/5/12 2:39:06.700 PM com.apple.launchd[1]: (org.isc.named[3058]) Exited with code: 1
9/5/12 2:39:06.700 PM com.apple.launchd[1]: (org.isc.named) Throttling respawn: Will start in 10 seconds
9/5/12 2:39:11.359 PM com.apple.launchd[1]: (org.freeradius.radiusd[3060]) Exited with code: 1
9/5/12 2:39:11.359 PM com.apple.launchd[1]: (org.freeradius.radiusd) Throttling respawn: Will start in 10 seconds
9/5/12 2:39:16.715 PM com.apple.launchd[1]: (org.isc.named[3061]) Exited with code: 1
9/5/12 2:39:16.715 PM com.apple.launchd[1]: (org.isc.named) Throttling respawn: Will start in 10 seconds
9/5/12 2:43:17.060 PM named[3171]: starting BIND 9.8.1-P1 -f
9/5/12 2:43:17.060 PM named[3171]: built with '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--prefix=/usr' '--sysconfdir=/private/etc' '--localstatedir=/private/var' '--enable-atomic=no' '--with-openssl=yes' '--with-gssapi=yes' '--enable-symtable=none' 'CC=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/u sr/bin/cc' 'CFLAGS=-arch i386 -arch x86_64 -g -Os -pipe -gdwarf-2 ' 'LDFLAGS=-arch i386 -arch x86_64 -framework IOKit -framework CoreFoundation' 'CXX=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/ usr/bin/c++' 'CXXFLAGS=-arch i386 -arch x86_64 -g -Os -pipe '
9/5/12 2:43:17.064 PM named[3171]: /private/etc/named.conf:4: open: /etc/rndc.key: file not found
9/5/12 2:43:17.064 PM named[3171]: loading configuration: file not found
9/5/12 2:43:17.064 PM named[3171]: exiting (due to fatal error)
9/5/12 2:43:17.065 PM com.apple.launchd[1]: (org.isc.named[3171]) Exited with code: 1
9/5/12 2:43:17.065 PM com.apple.launchd[1]: (org.isc.named) Throttling respawn: Will start in 10 seconds
9/5/12 2:43:22.164 PM com.apple.launchd[1]: (org.freeradius.radiusd[3173]) Exited with code: 1
9/5/12 2:43:22.164 PM com.apple.launchd[1]: (org.freeradius.radiusd) Throttling respawn: Will start in 10 seconds
9/5/12 2:43:27.075 PM named[3174]: starting BIND 9.8.1-P1 -f
Process: SleepServicesD [48]
Path: /System/Library/CoreServices/SleepServicesD
Identifier: SleepServicesD
Version: 1.43
Code Type: X86-64 (Native)
Parent Process: launchd [1]
User ID: 0
Date/Time: 2012-09-05 07:47:33.363 -0400
OS Version: Mac OS X 10.8.1 (12B19)
Report Version: 10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
Assertion failed: (ret == kIOReturnSuccess), function -[PowerStateTracker init], file /SourceCache/SleepServicesD_executables/SleepServicesD-1.43/SleepServicesD/Powe rStateTracker.m, line 148.
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x00007fff8cbbe212 __pthread_kill + 10
1 libsystem_c.dylib 0x00007fff897deb34 pthread_kill + 90
2 libsystem_c.dylib 0x00007fff89822dfa abort + 143
3 libsystem_c.dylib 0x00007fff89823dd5 __assert_rtn + 146
4 SleepServicesD 0x000000010ce44e09 0x10ce43000 + 7689
5 SleepServicesD 0x000000010ce43e75 0x10ce43000 + 3701
6 libdyld.dylib 0x00007fff87b2b7e1 start + 1
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff8cbbed16 kevent + 10
1 libdispatch.dylib 0x00007fff8bba8e26 _dispatch_mgr_invoke + 883
2 libdispatch.dylib 0x00007fff8bba8a2a _dispatch_mgr_thread + 54
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x0000000000000006 rcx: 0x00007fff52dbcd28 rdx: 0x0000000000000000
rdi: 0x0000000000000707 rsi: 0x0000000000000006 rbp: 0x00007fff52dbcd50 rsp: 0x00007fff52dbcd28
 r8: 0x00007fff77590278 r9: 0x0000000000000094 r10: 0x0000000020000000 r11: 0x0000000000000206
r12: 0x000000010ce4e16e r13: 0x000000010ce4e050 r14: 0x00007fff77591180 r15: 0x000000010ce4e06a
rip: 0x00007fff8cbbe212 rfl: 0x0000000000000206 cr2: 0x00007fff77589fe8
Logical CPU: 0
Binary Images:
 0x10ce43000 - 0x10ce50fff SleepServicesD (1.43) <0FDAEB5E-4E24-3836-AFBD-81E309DEB0DC> /System/Library/CoreServices/SleepServicesD
 0x7fff6ca43000 - 0x7fff6ca7793f dyld (210.2.3) <A40597AA-5529-3337-8C09-D8A014EB1578> /usr/lib/dyld
 0x7fff87083000 - 0x7fff870d4fff com.apple.SystemConfiguration (1.12 - 1.12) <7A8300B5-F5B3-39F0-A4B2-4C0C293FA29F> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
 0x7fff871b7000 - 0x7fff871dbff7 libc++abi.dylib (24.2) <340E7C7B-DC93-3AA2-B015-B1C9541EC255> /usr/lib/libc++abi.dylib
 0x7fff87314000 - 0x7fff87315ff7 libSystem.B.dylib (169.3) <365477AB-D641-389D-B8F4-A1FAE9657EEE> /usr/lib/libSystem.B.dylib
 0x7fff87382000 - 0x7fff873a3ff7 libCRFSuite.dylib (33) <736ABE58-8DED-3289-A042-C25AF7AE5B23> /usr/lib/libCRFSuite.dylib
 0x7fff8754e000 - 0x7fff875fffff com.apple.LaunchServices (539 - 539) <04FA5C61-6349-3841-9609-B650B6222800> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
 0x7fff87772000 - 0x7fff877a8fff libsystem_info.dylib (406.17) <4FFCA242-7F04-365F-87A6-D4EFB89503C1> /usr/lib/system/libsystem_info.dylib
 0x7fff877d8000 - 0x7fff87827ff7 libcorecrypto.dylib (106) <57BC99C6-3C3F-344C-BDD6-25E845D956F2> /usr/lib/system/libcorecrypto.dylib
 0x7fff87935000 - 0x7fff87936ff7 libdnsinfo.dylib (453.16) <38A3E0F4-E34C-3D45-A2C9-4CDE2DF007BD> /usr/lib/system/libdnsinfo.dylib
 0x7fff87aca000 - 0x7fff87b27ff7 com.apple.AE (645 - 645) <9C3E54BA-EE6B-3F02-8775-9C4AF40F40CD> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
 0x7fff87b29000 - 0x7fff87b2cff7 libdyld.dylib (210.2.3) <F59367C9-C110-382B-A695-9035A6DD387E> /usr/lib/system/libdyld.dylib
 0x7fff893df000 - 0x7fff8944cfff com.apple.datadetectorscore (4.0 - 269.1) <C94C372B-3821-3A46-A8C2-091AB1CFF7F4> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
 0x7fff897c9000 - 0x7fff89895fef libsystem_c.dylib (825.24) <16B6B86C-53EE-36E8-AC2B-4AADC1008098> /usr/lib/system/libsystem_c.dylib
 0x7fff89e95000 - 0x7fff89e96fff liblangid.dylib (116) <864C409D-D56B-383E-9B44-A435A47F2346> /usr/lib/liblangid.dylib
 0x7fff89ec4000 - 0x7fff89ec7fff com.apple.TCC (1.0 - 1) <DE7ECAC3-BD08-323A-9C12-EE4A49B72871> /System/Library/PrivateFrameworks/TCC.framework/Versions/A/TCC
 0x7fff8a2ae000 - 0x7fff8a421ff7 com.apple.CFNetwork (596.1 - 596.1) <62830510-738D-3719-AD51-68E816B13BB7> /System/Library/Frameworks/CFNetwork.framework/Versions/A/CFNetwork
 0x7fff8a438000 - 0x7fff8a440ff7 libsystem_dnssd.dylib (379.27.1) <B9F7B01D-8FAF-3CA5-909E-4D52B8D2DD8A> /usr/lib/system/libsystem_dnssd.dylib
 0x7fff8a914000 - 0x7fff8a97dfff libstdc++.6.dylib (56) <EAA2B53E-EADE-39CF-A0EF-FB9D4940672A> /usr/lib/libstdc++.6.dylib
 0x7fff8a989000 - 0x7fff8a989fff com.apple.CoreServices (57 - 57) <9DD44CB0-C644-35C3-8F57-0B41B3EC147D> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
 0x7fff8a9a5000 - 0x7fff8a9a7fff libquarantine.dylib (52) <4BE2E642-A14F-340A-B482-5BD2AEFD9C24> /usr/lib/system/libquarantine.dylib
 0x7fff8b648000 - 0x7fff8b656ff7 libsystem_network.dylib (77.10) <0D99F24E-56FE-380F-B81B-4A4C630EE587> /usr/lib/system/libsystem_network.dylib
 0x7fff8bab4000 - 0x7fff8bae5fff com.apple.DictionaryServices (1.2 - 184) <B37F9A90-8954-3DEC-A216-8ABB15C615A1> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
 0x7fff8bba4000 - 0x7fff8bbb9ff7 libdispatch.dylib (228.18) <0B6B6E7F-4D8A-3F3B-A4BF-6CF34638DBBB> /usr/lib/system/libdispatch.dylib
 0x7fff8bbbc000 - 0x7fff8bbbcfff libOpenScriptingUtil.dylib (148) <4DB14EC4-422C-3AE8-83BF-354FEC197FD3> /usr/lib/libOpenScriptingUtil.dylib
 0x7fff8bbbd000 - 0x7fff8bc3efff com.apple.Metadata (10.7.0 - 707.1) <ED39A710-1D87-3207-BB7D-4465B2673C1D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
 0x7fff8bd19000 - 0x7fff8bd26fff libbz2.1.0.dylib (29) <CE9785E8-B535-3504-B392-82F0064D9AF2> /usr/lib/libbz2.1.0.dylib
 0x7fff8bd82000 - 0x7fff8bd8afff liblaunch.dylib (442.21) <224CB010-6CF8-3FC2-885C-6F80330321EB> /usr/lib/system/liblaunch.dylib
 0x7fff8bd8b000 - 0x7fff8bd8cfff libsystem_blocks.dylib (59) <D92DCBC3-541C-37BD-AADE-ACC75A0C59C8> /usr/lib/system/libsystem_blocks.dylib
 0x7fff8bdc2000 - 0x7fff8bdc7fff libcompiler_rt.dylib (30) <08F8731D-5961-39F1-AD00-4590321D24A9> /usr/lib/system/libcompiler_rt.dylib
 0x7fff8c7ee000 - 0x7fff8cb05ff7 com.apple.CoreServices.CarbonCore (1037 - 1037) <5127E2AB-AE98-3393-AEF6-CA8C1090F921> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
 0x7fff8cbaa000 - 0x7fff8cbabff7 libremovefile.dylib (23.1) <DBBFAF35-AC78-3856-92F6-6E4FD9DF14A2> /usr/lib/system/libremovefile.dylib
 0x7fff8cbac000 - 0x7fff8cbc7ff7 libsystem_kernel.dylib (2050.9.2) <F646589B-13F8-3685-8C17-92C77993AE86> /usr/lib/system/libsystem_kernel.dylib
 0x7fff8d38e000 - 0x7fff8d3a5fff com.apple.GenerationalStorage (1.1 - 132.1) <EAB41613-0145-3CE5-AA60-A8A791A3EE22> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
 0x7fff8d600000 - 0x7fff8d601fff libDiagnosticMessagesClient.dylib (7) <56A70657-E8C2-3804-AB87-77DC100512A4> /usr/lib/libDiagnosticMessagesClient.dylib
 0x7fff8e379000 - 0x7fff8e3a4fff libxslt.1.dylib (11.3) <441776B8-9130-3893-956F-39C85FFA644F> /usr/lib/libxslt.1.dylib
 0x7fff8e3a5000 - 0x7fff8e3aafff libcache.dylib (57) <65187C6E-3FBF-3EB8-A1AA-389445E2984D> /usr/lib/system/libcache.dylib
 0x7fff8e580000 - 0x7fff8e58fff7 libxar.1.dylib (105) <370ED355-E516-311E-BAFD-D80633A84BE1> /usr/lib/libxar.1.dylib
 0x7fff8fb43000 - 0x7fff8fb49fff libmacho.dylib (829) <BF332AD9-E89F-387E-92A4-6E1AB74BD4D9> /usr/lib/system/libmacho.dylib
 0x7fff8fb96000 - 0x7fff8fb9dfff libcopyfile.dylib (89) <876573D0-E907-3566-A108-577EAD1B6182> /usr/lib/system/libcopyfile.dylib
 0x7fff8fb9e000 - 0x7fff8fefaff7 com.apple.Foundation (6.8 - 945) <0C972F73-0C07-3384-98F2-B176E0289494> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
 0x7fff8ffbd000 - 0x7fff8ffbfff7 libunc.dylib (25) <92805328-CD36-34FF-9436-571AB0485072> /usr/lib/system/libunc.dylib
 0x7fff900df000 - 0x7fff900edff7 libkxld.dylib (2050.9.2) <4BEE9BC3-3708-330E-89D6-03E715D712CC> /usr/lib/system/libkxld.dylib
 0x7fff90313000 - 0x7fff90410fff libsqlite3.dylib (138) <8D6A6805-1494-30D1-9F2A-F58FA3C0D7EE> /usr/lib/libsqlite3.dylib
 0x7fff9044b000 - 0x7fff904d8ff7 com.apple.SearchKit (1.4.0 - 1.4.0) <C7F43889-F8BF-3CB9-AD66-11AEFCBCEDE7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
 0x7fff905f7000 - 0x7fff9070fa27 libobjc.A.dylib (532) <9FA80CDA-97F4-3801-8879-0C1B976BC5CA> /usr/lib/libobjc.A.dylib
 0x7fff90767000 - 0x7fff90772fff libsystem_notify.dylib (98.5) <C49275CC-835A-3207-AFBA-8C01374927B6> /usr/lib/system/libsystem_notify.dylib
 0x7fff9084e000 - 0x7fff90855fff com.apple.NetFS (5.0 - 4.0) <82E24B9A-7742-3DA3-9E99-ED267D98C05E> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
 0x7fff90856000 - 0x7fff90868ff7 libz.1.dylib (43) <2A1551E8-A272-3DE5-B692-955974FE1416> /usr/lib/libz.1.dylib
 0x7fff90904000 - 0x7fff90904fff libkeymgr.dylib (25) <CC9E3394-BE16-397F-926B-E579B60EE429> /usr/lib/system/libkeymgr.dylib
 0x7fff90988000 - 0x7fff9099ffff com.apple.CFOpenDirectory (10.8 - 151.10) <FFBBA538-00B5-334E-BA5B-C8AD6CDCDA14> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
 0x7fff91197000 - 0x7fff9119dfff com.apple.DiskArbitration (2.5 - 2.5) <348AC0CC-6BCE-3416-9141-A5C1164EDDFF> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
 0x7fff912a3000 - 0x7fff9148cfff com.apple.CoreFoundation (6.8 - 744) <47AEA7C7-EF9B-3FC6-AEBF-CE02FC650301> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
 0x7fff9194b000 - 0x7fff91959fff libcommonCrypto.dylib (60026) <2D6537F5-1B5E-305C-A1CF-D1FA80CA3939> /usr/lib/system/libcommonCrypto.dylib
 0x7fff91cb1000 - 0x7fff91cbeff7 com.apple.NetAuth (4.0 - 4.0) <F5BC7D7D-AF28-3C83-A674-DADA48FF7810> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
 0x7fff91cbf000 - 0x7fff91cc5ff7 libunwind.dylib (35.1) <21703D36-2DAB-3D8B-8442-EAAB23C060D3> /usr/lib/system/libunwind.dylib
 0x7fff91cc6000 - 0x7fff91d33ff7 com.apple.framework.IOKit (2.0 - 755.9.7) <9B7C5E7A-3F7A-3E70-8179-4384992B84E0> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
 0x7fff91f9d000 - 0x7fff9226aff7 com.apple.security (7.0 - 55178.0.1) <8102877E-C866-33D4-A947-02FC7F4BAA95> /System/Library/Frameworks/Security.framework/Versions/A/Security
 0x7fff924c7000 - 0x7fff9256dfff com.apple.CoreServices.OSServices (557 - 557) <F5955FD8-E6E1-359F-9D9D-381E55E3EF37> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
 0x7fff925a2000 - 0x7fff9260aff7 libc++.1.dylib (65.1) <20E31B90-19B9-3C2A-A9EB-474E08F9FE05> /usr/lib/libc++.1.dylib
 0x7fff92615000 - 0x7fff92643ff7 libsystem_m.dylib (3022.6) <B434BE5C-25AB-3EBD-BAA7-5304B34E3441> /usr/lib/system/libsystem_m.dylib
 0x7fff928ad000 - 0x7fff928aeff7 libsystem_sandbox.dylib (220) <3C3B03CF-C525-3CB3-8557-62E91B93AC95> /usr/lib/system/libsystem_sandbox.dylib
 0x7fff934b2000 - 0x7fff934c5ff7 libbsm.0.dylib (32) <F497D3CE-40D9-3551-84B4-3D5E39600737> /usr/lib/libbsm.0.dylib
 0x7fff934c6000 - 0x7fff934cafff libpam.2.dylib (20) <C8F45864-5B58-3237-87E1-2C258A1D73B8> /usr/lib/libpam.2.dylib
 0x7fff934d7000 - 0x7fff93523ff7 libauto.dylib (185.1) <73CDC482-16E3-3FC7-9BB4-FBA2DA44DBC2> /usr/lib/libauto.dylib
 0x7fff93524000 - 0x7fff93546ff7 libxpc.dylib (140.37) <C552985C-2171-3136-A1B9-3AB21CBF7C4A> /usr/lib/system/libxpc.dylib
 0x7fff93547000 - 0x7fff93644ff7 libxml2.2.dylib (22.3) <47B09CB2-C636-3024-8B55-6040F7829B4C> /usr/lib/libxml2.2.dylib
 0x7fff9380f000 - 0x7fff93a0ffff libicucore.A.dylib (491.11.1) <17E8B610-6B16-3F91-B49C-7CAE0D08E9CF> /usr/lib/libicucore.A.dylib
External Modification Summary:
Calls made by other processes targeting this process:
 task_for_pid: 0
 thread_create: 0
 thread_set_state: 0
Calls made by this process:
 task_for_pid: 0
 thread_create: 0
 thread_set_state: 0
Calls made by all processes on this machine:
 task_for_pid: 21
 thread_create: 0
 thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=79.5M resident=36.3M(46%) swapped_out_or_unallocated=43.2M(54%)
Writable regions: Total=40.1M written=332K(1%) resident=408K(1%) swapped_out=0K(0%) unallocated=39.7M(99%)
REGION TYPE VIRTUAL
=========== =======
MALLOC 31.3M
MALLOC guard page 32K
STACK GUARD 56.0M
Stack 8712K
VM_ALLOCATE 8K
__DATA 3240K
__LINKEDIT 52.8M
__TEXT 26.7M
__UNICODE 544K
shared memory 12K
=========== =======
TOTAL 179.1M

1. Mae sure that the ports you have specified in the Communiation tab are not specified anywhere else, either in PCo or in another application on the PCo worstation. For testing, set either MII or Legacy and use the same port number for each, just don't chec both boxes at the same time.
The Legacy and MII port settings must be different, or you should receive an error in PCo. As Steve mentioned, a port address can only be used once by any application on a given server. Multiple PCo agents using the same port will cause a conflict as will trying to use the same port for both Legacy and MII connector for a single agent. MII 11.5 only supports the Legacy (UDC) Connector, so I suggest that you do not select the MII connector check box and leave the port setting blank. Select Legacy connector and set a port address for that connector.
To determine if a port is available to use, you can open a command prompt and use the command netstat -a -o to list all the ports which are in use. Please note, this is only active ports.
2. I think you will need to get the compatibility issue between xMII 11.5 and PCo 2.1 answered by the PCo team; I have no way of testing this.
MII 11.5 should work with PCo 2.1. Configure the PCo agent to use the Legacy connector. Create a UDC data server in MII and Pco should work like the UDS.
Regards
Chris Carney

Policy Agent Error

Version:
Solaris: 8
IS 6.0
Policy Agent 2.0
Webserver: iWS 6.0
I installed the agent, configured a policy protecting the resources on the webserver. When I access any resource, it throws me a login page (as it should). Once I submit the credentials, I get a 403 error on the page. The agent logs show the following:
2003-01-30 13:38:23.168 Error 4355:42b508 PolicyEngine: am_policy_evaluate: InternalException in Service::construct_auth_svc with error message:Application authentication failed during service creation. and code:20
2003-01-30 13:38:23.168 Warning 4355:42b508 PolicyAgent: am_web_is_access_allowed(http://server.sub.com:8081/index.html, GET) denying access: status = access denied (20)
2003-01-30 13:38:23.169 -1 4355:42b508 PolicyAgent: validate_session_policy() access denied to unknown user
At the same time I can see the user session active under the IS console.
Can somebody help me here?
Thanks

ahhh, what shared secret did you use to install. You should of used the amldapuser account password rather than amadmin
Use the cryptutil to hash that password and stick it in the AMAgent file. Restart and all will be well.
Steve

XML to EXCEL with Conversion agent error: XML to EXCEL PROCCES FAILD

Hello,
I have scenario from Oracle database to Excel.
For this scenario I use with conversion agent by itemfield to transfer data from XML to EXCEL.
The scenario not worked.
Few points:
1. I add the conversion agent module to SAP XI receiver communication channel.
2. When I change the scenario to oracle to xml (without using conversion agent) the scenario works OK.
3. When I drag the CME file to the studio I found the error message: XML to EXCEL PROCCES FAILD.
4. I use with conversion agent in other scenario (EDI to IDOC) without any problem.
5. I'm not found any clue for this problem in XI RWB.
Elad

hi Elad,
to do the conversion,you have to define a module and import it into you CC.
also see nexts blog
Yet another "from database or internal table to Excel"
Reading Excel Data from Java Using HSSF API
Reading Excel line items using the jExcel API
Read Excel instead of XML through FileAdapter
Thanks
Rodrigo

AGTCTL - Heterogeneous Agent error 28591

Similar Messages

Maybe you are looking for