AGV 7.5

I have the BEFW11S4 router, the problem I am having is that I can not use the my lap top if I have my anti virus along with the fire wall on line at the same time. How do I get them to work together. Thanks in advance for any help you can give me.
fccuman

Does this occur when playing all types of music (MP3, AAC, etc)? Yes, all types
What do you mean by ANYTHING? Anything within iTunes, anything in any application? Anything in any application
Does the same issue happen if you play music in the Finder? Yes
Do you have any iTunes plugins or add-ons installed? No
Are you using Sound Enhancer in iTunes? Does the issue go away if you turn it off? Turned it off and still have the issue
Does the issue occur if you quit all applications except iTunes? Yes

Similar Messages

Satellite A300D-15B - Switched off and charging issue

Hi
I have a Satellite A300D-15B, running Windows 7 32bit, which bought quite recently used. I have encountered a couple of problems which I hope someone can help me with!
Firstly, the day I got the machine, it switched suddenly, but turned back on immediately and seemed to be ok. Afterwards, 3 weeks later (saturday 2nd July) I was installing some software when I got a virus warning from AGV, within a few moments the machine again turned off suddenly. Unfortuanetly this time it would not turn back on and the charge/AC supply lights would not come on. After doing some research I found that disconnecting the BIOS battery and dissipating the power enabled me to turn the machine on. Is there any known issues which could be causing this?
Secondly, once I had got the laptop to turn on after the sudden shutdown on staurday, I have found the charger still wont register as being plugged in unless i use the folling procedure.
1) diconnect the mains fuse cable from the transformer block
2) remove the battery
3) plug in the DC jack
4) reconnect the mains cable to the transformer which causes the mains light on the laptop to turn on.
5) reconnect the battery
The laptop then charges normally, I am using it to write this post.
I have to use this process everytime the machine is unplugged from the the mains or charger, which is irritating and also a worry that there could be big problems on the horizon.
Any help would be hugely appreciated.
cheers
John

Hi
I upgraded it to 7, the first time it shut down was the first time it was switched on after the recovery disc had been used. Could that be an out of date driver on original settings? Then upgrading to 7 giving similar problems?
I upgraded to 7 not a fresh install, which I never usually do.
The charger is a genuine unit not a 3rd party, I won't use them as I've had issues in the past. I'm just concerned it's a mainboard problem given the shutdown and subsequent strange charging behaviour. Do these have EEPROM's in the chargers and maybe clearing the CMOS has caused a recognition problem?
Cheers
J

My Macbook is running really slow - help (Etrecheck report included)

I have a Macbook Pro, and it runs insanely slow. Trying to do something simple like surfing the net and listening to Itunes generally results in the spinning wheel coming up after every clicked link. Excel will cause a 45 second spinning wheel when doing something simple like =2+2. I don't use this machine for anything too complicated and I'm just finding it runs extraordinarily slow. Any advice is welcome.
Problem description:
Mac is running slow
EtreCheck version: 2.1.5 (108)
Report generated December 26, 2014 at 7:49:49 PM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 26 days 0:16:38
Disk Information: ℹ️
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (64.27 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.BlackBerry.driver.USBCDCNCM (1.0.10 - SDK 10.7) [Support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (2.2.7 - SDK 10.7) [Support]
[loaded] com.rim.driver.BlackBerryVirtualPrivateNetwork (1.0.18 - SDK 10.8) [Support]
/Library/Parallels/Parallels Service.app
[not loaded] com.parallels.kext.prl_hid_hook (7.0 15107.796624) [Support]
[not loaded] com.parallels.kext.prl_hypervisor (7.0 15107.796624) [Support]
[not loaded] com.parallels.kext.prl_netbridge (7.0 15107.796624) [Support]
[not loaded] com.parallels.kext.prl_usb_connect (7.0 15107.796624) [Support]
[not loaded] com.parallels.kext.prl_vnic (7.0 15107.796624) [Support]
Startup Items: ℹ️
AvgNetShieldLoader: Path: /Library/StartupItems/AvgNetShieldLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.avg.LinkScannerAgent.plist [Support]
[loaded] com.citrix.AuthManager_Mac.plist [Support]
[running] com.citrix.ReceiverHelper.plist [Support]
[running] com.citrix.ServiceRecords.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[invalid?] com.parallels.desktop.launch.plist [Support]
[loaded] com.parallels.DesktopControlAgent.plist [Support]
[running] com.parallels.vm.prl_pcproxy.plist [Support]
[running] com.rim.BBLaunchAgent.plist [Support]
[running] com.rim.blackberrylink.BlackBerry-Link-Helper-Agent.plist [Support]
[running] com.rim.PeerManager.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.avg.apiServices.plist [Support]
[running] com.avg.avginfosd.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.parallels.desktop.launchdaemon.plist [Support]
[running] com.rim.BBDaemon.plist [Support]
[not loaded] com.rim.nkehelper.plist [Support]
[running] com.rim.tunmgr.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.valvesoftware.steamclean.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.7.0 - SDK 10.7 [Support]
SharePointBrowserPlugin: Version: 14.1.0 [Support]
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 [Support]
Safari Extensions: ℹ️
AVG LinkScanner [Installed]
3rd Party Preference Panes: ℹ️
Citrix ShareFile Sync [Support]
Flash Player [Support]
Java [Support]
LinkScannerSettings [Support]
MacFUSE [Support]
Tuxera NTFS [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
 4% WindowServer
 1% HP Device Monitor
 0% Google Chrome
 0% fontd
 0% prl_disp_service
Top Processes by Memory: ℹ️
155 MB Google Chrome
131 MB Google Chrome Helper
120 MB softwareupdated
99 MB mds_stores
94 MB Finder
Virtual Memory Information: ℹ️
843 MB Free RAM
1.68 GB Active RAM
576 MB Inactive RAM
892 MB Wired RAM
35.64 GB Page-ins
1.24 GB Page-outs

I was hoping to get some more air-play on this. No one can help?
It is a long holiday weekend for many helpers here so responses will be slower---happens every major holiday. Lots of people traveling and not checking in.
Your first major problem is that you have AVG anti-virus installed. Such pieces of dreck do not offer enough protection to justify the performance problems they cause.
If you no longer use a Blackberry device, uninstall the many support files for it that are eating resources.
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 26 days 0:16:38
Try a restart every once in a while. That clears out a lot of crud that builds up.
The RAM usage results suggests that more RAM might help with your usage patterns. See how the computer behaves after restarting and evicting AGV, then we can judge whether you need more RAM. Your MBP can handle up to 16GB RAM and installation is a 10-15 minute job you can do at home.
Mid-2012 13-inch MacBook Pro non-Retina; 2.5Ghz i5 processor; OS10.9.5; 8GB RAM

How to use two monitors with my Mac mini

Hello,
I have a Mac mini and using a 20" Samsung Monitor with it which works well. I also have my 40" LCD Samsung telly, set up next to it. Whenever i watch a DVD using my Mac i have to swap over the cables. Is there a way of getting the right cables etc and making it so i would be able to watch a dvd on the 40" and still use the 20" surfing the net etc. I had a similar set up with my old windows laptop, but cant seem to work out how do it with the mac. Both monitors have modern sockets, the 40in has HDMI/DVI IN and AGV, the 20" has AGV and HDCP/DVI IN. Many thanks.

To the best of my knowledge there is no way to use dual displays on the Mini. You may be able to find some adapter that will allow you to physically connect two displays, but they will be mirrored, not spanned.
To do what you describe would take spanning, which the Mini is not capable of doing. Unless something has changed recently,..

Call web service from pl/sql

Dear All,
I have web service where I need to take picture as binary stream and insert it in the blob.
Which is the best way to call web service and store picture as binary stream (jpg file) into blob?
Kind regards,
E.

Thank you very much for helping me to invoke web service into my database.
I got message, now I need to decode picture from base64binary. Is there any way to do it trough pl/sql or I need use java?
My database is 10g.
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/">
<SOAP-ENV:Body>
<ns1:getFileResponse xmlns:ns1="urn:getfile1">
<return xsi:type="xsd:base64Binary">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</return>
</ns1:getFileResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>

Problem with FileItem of File Upload?

Hi Everybody,
I wrote a mail program using JSP as the front end and Servlet at the backend and inorder to upload the files from the client machine to the server machine i used the FileItem and DiskFileUpload interfaces...
But i am getting a problem ... if i use FileItem i cant use the "req (of type HttpServletRequest)" related methods and even if i use they will return null.
Is there any chance that i can use both FileItem and Request methods in the same servlet?
Is there any chance that i can find out the Client Machine IP Address using FileItem?
Thanks in advance

Hi,
I upload the par file using the browser and i am able to upload using the path sysAdmin>support->adminconsole.
But i ma unable to deploy the PAR from NWDS.
I implement the actions what you suggested and i agve some name like epserver as alias after this .I am got 502 error now also..
[28.12.06 / 19:29] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > No Information java.io.IOException: Server returned HTTP response code: 502 for URL: http://hddlgsdmnk-20:50100/irj/servlet/prt/portal/prteventname/upload/prtroot/com.sap.portal.runtime.system.console.ArchiveUploader?login_submit=on&j_user=epuser&j_password=Abcd1234&j_authscheme=default&uidPasswordLogon=Log%20on at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:800) at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.readResponse(DeployEngine.java:361)at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.uploadPar(DeployEngine.java:433)
Regds
Phani

I was just given a Mid 2009 MacBook Pro. It does not have a system on it.

I have my original disks from my early 2009 MacBook Pro. When I try to use the OS Install disk to install 10.5, which is what the early MacBook came with, it won't boot the computer. I have the upgrade to 10.6.3, but it will not work either, since it is only an upgrade.
I have 10.6.8 backed up to an external disk, but I want to have a different administrator name so we don't get confused. I have used the backup to at least get the mid 2009 working. I am unable to do an Erase and Install, which is what I want to do, even though there is nothing there.
Here is the Hardware Overview from the mid 2009:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i5
Processor Speed: 2.53 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0A
SMC Version (system): 1.58f16
Serial Number (system): W8******AGV
Hardware UUID: 42CB960E-B011-5E7A-A0A9-26E4E9B8FBCB
Sudden Motion Sensor:
State: Enabled
Here is the Hardware Overview from the Early 2009:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP51.007E.B06
SMC Version (system): 1.41f2
Serial Number (system): W8*******1GA
Hardware UUID: 5D4EE93E-2E82-5554-934D-308E301FDC5E
Sudden Motion Sensor:
State: Enabled
Is there any fix? Are the earlier, early 2009 disks incompatible with the mid 2009? Am I stuck with having the same Administrator for two computers? Does anyone have any suggestions?
There are compelling reasons that I don't want to upgrade past 10.6. I won't be able to get at MOST of my data because of Apple no longer supporting Rosetta. I have two other computers running Mountain Lion and Mavericks, but want to keep 10.6.8 on the MacBook Pros early and mid 2009.
<Personal Information Edited by Host>

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
 Snow Leopard General Requirements
 1. Mac computer with an Intel processor
 2. 1GB of memory
 3. 5GB of available disk space
 4. DVD drive for installation
 5. Some features require a compatible Internet service provider;
 fees may apply.
 6. Some features require Apple’s iCloud services; fees and
 terms apply.
Or you can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers.
It's possible that even the retail copy of Snow Leopard will not work because that model came with a special build of Snow Leopard. You cannot install Leopard on that model.
Original OS
Mac OS X 10.6.3 (10D2063a)
Maximum OS
Latest release of OS X

R/3 and EP connectivity Problem

Hi Everbody,
Plz can anyone will help me out ,
i have problem ina acessing BAPI with EP, i have tried the connectivity which they have provided in SDN but still iam unable to connect....
plz can anyonw will give me idea apart from the setting whatever we have in SDN any other setting need to be done .. plz let me know....
below setting what i ahve done......
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
After installing Sneak Preview SAP NetWeaver '04, you might want to try it by deploying J2EE application, portal application, or etc using SAP NetWeaver Developer Studio. However, in order to deploy and run Web Dynpro application with Adaptive RFC, System Landscape Directory (SLD) must be configured.
Assumption
1. SLD has not been configured
2. It is stopped
3. The OS is Windows Server 2003 Enterprise Edition named ' sapnw2k3ent'
4. ABAP system is installed at ' sape50'
Instruction Steps
1. Enter http://localhost:50000/sld with user ' admin' and password ' admin' 
2. Enter Administration page by clicking at navigation bar 
3. Enter Server Setting page 
4. Fill your hostname, sapnw2k3ent, in Object Server field and click Set button in section Server Parameters 
5. Go back to Administration page and start server
6. Enter Import page. Fill c:\usr\sap\J2E\SYS\global\sld\model\cr_content.zip in File field. 
7. Click on button ' Import CR Content from Server' and wait for a while. There are 25866 objects to be imported.
8. Enter Data Supplier Bridge page
9. Set Update local SLD to true, RFC Gateway server to sape50 and click on button ' Start Bridge'
10. Start Visual Administrator at C:\usr\sap\J2E\JC00\j2ee\admin\go.bat
11. If this is the first time for Visual Administrator, you have to create new connection with port 50004 
12. In Global Configuration -> Server -> Services -> Security Provider, set SynchPermissionsWithDatabase to true
13. Select Cluster -> J2E -> Server -> Services -> SLD Data Supplier
14. In Runtime tab page, select HTTP Settings tab page
15. Fill below information
<tbody> Host localhost
Port 50000
User admin
Password admin</tbody>
16. Go back to Information tab page and click on trigger button
17. Close Visual Administrator
18. Go to Home -> Technical Landscape via web browser and choose Technical System Type as 'Web AS Java'
19. You should see J2E instance right here 
20. Start SAP Logon and enter tcode rz70
21. Enter localhost in Host field and sapgw00 in Service field
22. Click on Proposal button and choose Yes in confirmation dialog 
23. Click on Activate button
24. Click on Start Data Collection button and choose Yes in confirmation dialog
25. You should get RFC call successful 
26. Go to Home -> Technical Landscape via web browser again and choose Technical System Type as 'Web AS ABAP'
27. You should see E50 instance right now 
You are ready to deploy JCo application! Enjoy programming.
i got stopped at 7th step whre its asking me password ...
when i agve it compeleted 50% then got disconnected
i did all above settings which are mentioned above , but still did not got success . plz help me its an urgent
Anajli

Hi Anjali,
Generally it takes more than half an hour to Import CR Content from Server.
If this fails, there should be network connectivity failure or some connectivity issue. I dont think there is any problem with portal or SLD.
As you say >>i got stopped at 7th step whre its asking me password ...
This clearly indicates there is a connectivity failure that asks for the password. Check whether you have set any time out option.
Regards,
venkat.

How to upload html files using Weblogic Bulkloader

I hav uploaded image files using bulkloader.
however with html files am facing a prob.
only the file structure gets created but there is no html file present inside.
in
Filename.html.md.properties i agv the followin
nodeType=html
lifecyclestatus=2
File=C:\ContentRepository\a.html
encoding=UTF-8
charset=us-ascii
mimeType = text/html
shud i add some more properties...

You have to do this your self by either (as vinod said) using a different component (not present in adf) or implementing this:
1) allow the user to select multiple filenames (somehow)
2) zip them together
3) upload the zip
4) unpack the zip on the server
5) work with the files
Timo

Minisap 4.6 login Problem

Hi All,
I have installed minisap 4.6c in my pc... my os is Win XP service pack 2.... i faced the following problem when i tried to logon..
description : MBS
SID :MBS
application server : my pc name or IP address
sap system : R/3
system number : 00
I first execute Start SAP MBS engine.. then i tried to logon but it showed the following error message:
Sapgui.exe
Failed to set socket option TCP_NODELAY (setsockopt)
An operation was attempted on something that is not a socket.
Pls Help me...It is very very important to me
Thanks
Message was edited by:
Keshri Shailendra

thanks alot !!!!
Now I have found the answer i just uninstall the AGV internet security and now it is working properly............

ORACLE 8 CRASH .....reason not known

I have Oracle 8.0.5 installed as a server which is used for a cleint-server application. Suddenlly the datafile which was of 3.5 GB was truncated to 150 MB. ALso now Oracle could not be started. AGve the following message
ORA-01200: actual file size of num is smaller than correct size of num blocks
I had enogh space on my drive. so i wonder why this happened. PLease help n advice.
i have Oracle installed as well as all datafiles on the same drive ( main,index,rollbak) since i have only one drive with logical partisons...just for information./
Thanks

There must be a virus problem with your Server
<BLOCKQUOTE>quote:<HR>Originally posted by vishal singh:
I have Oracle 8.0.5 installed as a server which is used for a cleint-server application. Suddenlly the datafile which was of 3.5 GB was truncated to 150 MB. ALso now Oracle could not be started. AGve the following message
ORA-01200: actual file size of num is smaller than correct size of num blocks
I had enogh space on my drive. so i wonder why this happened. PLease help n advice.
i have Oracle installed as well as all datafiles on the same drive ( main,index,rollbak) since i have only one drive with logical partisons...just for information./
Thanks <HR></BLOCKQUOTE>
null

Help with Data Block Based on Procedure--getting compilation error

I am trying to create a datablock based on a procedure , but im getting errors in compilation:
Errors are :
1) identifier 'HSM_WSH_DEL_UTIL.DEL_TBL' must be declared
2)PL/SQL ERROR 320 at line 7, column 27
the declaration of the type of this expression is incomplete or malformed
ANy Help would be appreciated !
Heres my pkg spec and body for the data block:
CREATE OR REPLACE PACKAGE hsm_wsh_del_util IS
TYPE del_record is record
(delivery_id number);
TYPE del_tbl is table of del_record INDEX BY BINARY_INTEGER;
procedure do_query(p_del IN OUT del_tbl);
END hsm_wsh_del_util ;
CREATE OR REPLACE PACKAGE BODY hsm_wsh_del_util IS
procedure do_query(p_del IN OUT del_tbl)
IS
idx number :=1;
CURSOR DELIVERY IS
SELECT DELIVERY_ID
FROM abc_deliveries;
begin
FOR CUR IN DELIVERY LOOP
p_del(idx).delivery_id :=cur.delivery_id;
idx:= idx+1;
END LOOP;
end do_query;
END hsm_wsh_del_util;
Edited by: 981170 on Mar 13, 2013 1:08 PM

Hi,
Yes I did use the wizard,
I agve it the package.proc name for query.
it pulled up the field delivery ID,
Hit finish, because I do not need update/delete/inserts.
the query data source columns and arguments was defaulted correctly.
THe QUERY-PROCEDURE was built by default.
It is giving me an error though: wrong number or types of arguments in call to POPULATE_BLOCK..
DECLARE
bk_data HSM_WSH_DEL_UTIL.DEL_TBL;
BEGIN
hsm_wsh_del_util.do_query(bk_data);
PLSQL_TABLE.POPULATE_BLOCK(bk_data, 'NEW_DELIVERIES');
END;

Can't update Photoshop to 14.1.1 release

As per title.
I tried almost everything. I uninstalled the Creative Cloud updater, and reinstalled. I removed the temp files from the hidden MAC folders.
But, still I keeping on getting the error message I'm not connected to the internet and, of course, I am.
In order to verify the proper connection (as well as the firewall setup and things like that), I've tried downloading another software (in this case was the Extended toolkit) and enerything went smoothly with no errors whatsoevere.
So, looks like it's just the Photoshop update which is not working (error's screen shot attached).
Any ideas?
I run on a MBP updated few days ago to the last ML 10.8.5 (could it be the reason?).
Alessandro.
P.S.: Right now, I'm connected wireless through the company server/connection, but it hasn't ever been a problem to update softwares.

Very last news... Bridge CC update notification arrived and there was no problems updating it.
At this poi I think there is definetely something wrong with my installation.
I'll remove Photoshop and reinstall it, see if it'll solve it.
By the way, this is the aamu log:
09/17/13 10:32:59:280 | [INFO] | | UPDATER | CORE | | | | 251195 | >>> Adobe Updater Log Begin >>>
09/17/13 10:32:59:280 | [INFO] | | UPDATER | CORE | | | | 251195 | UpdaterCoreImpl::InitLogFile : Application Version 7.0.0.70
09/17/13 10:32:59:280 | [INFO] | | UPDATER | CORE | | | | 251195 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = /Users/alessandro/Library/Application Support/Adobe/AAMUpdater/1.0/aamu.log
09/17/13 10:32:59:280 | [INFO] | | UPDATER | CORE | | | | 251195 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
09/17/13 10:32:59:280 | [INFO] | | UPDATER | CORE | | | | 251195 | Stepped into << UCInitialize >> call
09/17/13 10:32:59:281 | [INFO] | | UPDATER | CORE | | | | 251195 | UCInitialize : AAM is launched via CCM.
09/17/13 10:32:59:281 | [INFO] | | UPDATER | CORE | | | | 251195 | Stepped into << UCSetUpdateEnginePath >> call
09/17/13 10:32:59:360 | [INFO] | | UPDATER | CORE | | | | 251195 | Returning from << UCSetUpdateEnginePath >> call error = 0 retVal = 1
09/17/13 10:32:59:361 | [INFO] | | UPDATER | CORE | | | | 251195 | Stepped into << UCSetDeploymentEnginePath >> call
09/17/13 10:32:59:437 | [INFO] | | UPDATER | CORE | | | | 251195 | Returning from << UCSetDeploymentEnginePath >> call error = 0 retVal = 1
09/17/13 10:32:59:438 | [INFO] | | UPDATER | CORE | | | | 251195 | Returning from << UCInitialize >> call error = 0 retVal = 1
09/17/13 10:32:59:438 | [INFO] | | UPDATER | CORE | | | | 251195 | Stepped into << UCSetProxyInfo >> call
09/17/13 10:32:59:438 | [INFO] | | UPDATER | CORE | | | | 251195 | UCSetProxyInfo : WARNING - Failed to updated data into preference file = U1M1UNKNOWN43
09/17/13 10:32:59:438 | [INFO] | | UPDATER | CORE | | | | 251195 | Returning from << UCSetProxyInfo >> call, retVal = 1
09/17/13 10:33:00:518 | [INFO] | | UPDATER | CORE | | | | 244766 | Stepped into << UCDownloadUpdates >> call
09/17/13 10:33:00:519 | [INFO] | | UPDATER | CORE | | | | 244766 | UCDownloadUpdates : call from CCM
09/17/13 10:33:00:519 | [INFO] | | UPDATER | CORE | | | | 244766 | Stepped into << AdobeUpdaterCreateThread >> API
09/17/13 10:33:00:519 | [INFO] | | UPDATER | CORE | | | | 244766 | Returning from << AdobeUpdaterCreateThread >> API
09/17/13 10:33:00:519 | [INFO] | | UPDATER | CORE | | | | 244766 | StartUpdateInstallerSubsystem : Waiting for IPC thread to instantiate IPC channel.
09/17/13 10:33:00:519 | [INFO] | | UPDATER | CORE | | | | 251256 | ThreadInstallRequestHandler : Creating new IPC Object for Install control
09/17/13 10:33:00:519 | [INFO] | | UPDATER | CORE | | | | 251256 | ThreadInstallRequestHandler : Acquiring kSyncUpdaterCoreIPCRecvPacketWaitKey Lock before re intializing IPC Channel.
09/17/13 10:33:00:529 | [INFO] | | UPDATER | CORE | | | | 244766 | StartUpdateInstallerSubsystem : LaunchUpdateInstallerAsAdmin before.
09/17/13 10:33:00:529 | [INFO] | | UPDATER | CORE | | | | 244766 | LaunchUpdateInstallerAsAdmin: UpdateInstaller utility path is : = /Applications/Utilities/Adobe Application Manager/UWA/Adobe Application Manager (Updater)
09/17/13 10:33:00:602 | [INFO] | | UPDATER | CORE | | | | 244766 | LaunchUpdateInstallerAsAdmin: sCmdLineArgs1 is : = -mode=productupdate
09/17/13 10:33:00:602 | [INFO] | | UPDATER | CORE | | | | 244766 | LaunchUpdateInstallerAsAdmin: sCmdLineArgs2 is : = -appDataDir=/Users/alessandro/Library/Application Support/Adobe/AAMUpdater/1.0
09/17/13 10:33:00:602 | [INFO] | | UPDATER | CORE | | | | 244766 | LaunchUpdateInstallerAsAdmin: sCmdLineArgs3 is : = -deploymentEnginePath=/Applications/Utilities/Adobe Application Manager/DECore/Setup.app/Contents/MacOS/Setup
09/17/13 10:33:00:690 | [INFO] | | UPDATER | CORE | | | | 244766 | LaunchUpdateInstallerAsAdmin: UpdateInstaller launch executed successfully using launcher.
09/17/13 10:33:00:690 | [INFO] | | UPDATER | CORE | | | | 244766 | StartUpdateInstallerSubsystem : Releasing kSyncUpdaterCoreIPCRecvPacketWaitKey Lock.
09/17/13 10:33:00:690 | [INFO] | | UPDATER | CORE | | | | 244766 | StartUpdateInstallerSubsystem : Acquiring kSyncUpdaterCoreIPCInitializationWaitKey Lock before intializing IPC Channel.
09/17/13 10:33:00:690 | [INFO] | | UPDATER | CORE | | | | 251256 | ThreadInstallRequestHandler : Initializing IPC channel for Install control
09/17/13 10:33:00:728 | [INFO] | | UPDATER | CORE | | | | 251256 | ThreadInstallRequestHandler : Releasing kSyncUpdaterCoreIPCInitializationWaitKey Lock after IPC Channel.
09/17/13 10:33:00:728 | [INFO] | | UPDATER | CORE | | | | 244766 | StartUpdateInstallerSubsystem : Acquiring kSyncUpdaterCoreIPCAckPacketWaitKey Lock before re intializing IPC Channel.
09/17/13 10:33:00:728 | [INFO] | | UPDATER | CORE | | | | 251256 | NotifyResultToInstallerSubSystem : Sending packet with id = 9
09/17/13 10:33:00:780 | [INFO] | | UPDATER | CORE | | | | 244766 | StartUpdateInstallerSubsystem : Received ACK from Update Installer subsystem for Initialization.
09/17/13 10:33:00:780 | [INFO] | | UPDATER | CORE | | | | 244766 | SetDownloadUpdatesInProgress : = 1
09/17/13 10:33:00:780 | [INFO] | | UPDATER | CORE | | | | 244766 | Returning from << UCDownloadUpdates >> call error = 0 retVal = 1
09/17/13 10:33:00:781 | [INFO] | | UPDATER | CORE | | | | 251289 | ThreadDownloadUpdates: Downloading installer for update refID: AdobePhotoshopCCSupport-14.0/14.1.1
09/17/13 10:33:00:781 | [INFO] | | UPDATER | CORE | | | | 251289 | getValidationType: Going for AGV validation for the downloaded installer
09/17/13 10:33:00:787 | [INFO] | | UPDATER | CORE | | | | 251289 | ThreadDownloadUpdates:: Initializing Download
09/17/13 10:33:00:788 | [INFO] | | UPDATER | CORE | | | | 251289 | GDEDownloader:: GDEInitialize Successful
09/17/13 10:33:00:789 | [INFO] | | UPDATER | CORE | | | | 251289 | GDEDownloader:: GDEInitDownloader Successful
09/17/13 10:33:00:893 | [INFO] | | UPDATER | CORE | | | | 251289 | GDEDownloader:: GDEGetFileSize Successful
09/17/13 10:33:00:893 | [INFO] | | UPDATER | CORE | | | | 251289 | ThreadDownloadUpdates:: Starting Download
09/17/13 10:33:01:032 | [INFO] | | UPDATER | CORE | | | | 251289 | GDEDownloader:: Download Successfully Started
09/17/13 10:33:01:669 | [INFO] | | UPDATER | CORE | | | | 251289 | ThreadDownloadUpdates:: ERROR: Error while downloading, Trying to Handle
09/17/13 10:33:01:669 | [INFO] | | UPDATER | CORE | | | | 251289 | ThreadDownloadUpdates:: ERROR: No Network
09/17/13 10:33:01:809 | [INFO] | | UPDATER | CORE | | | | 251289 | GDEDownloader:: GDE Closed
09/17/13 10:33:01:809 | [INFO] | | UPDATER | CORE | | | | 251289 | ThreadDownloadUpdates:: ERROR: Download Stopped
09/17/13 10:33:01:866 | [INFO] | | UPDATER | CORE | | | | 244766 | SetDownloadUpdatesInProgress : = 0
09/17/13 10:33:01:866 | [INFO] | | UPDATER | CORE | | | | 244766 | SetDownloadUpdatesInProgress : = 0
09/17/13 10:33:01:866 | [INFO] | | UPDATER | CORE | | | | 244766 | UCGetprogress : Updates download returning state for reffId = AdobePhotoshopCCSupport-14.0/14.1.1
09/17/13 10:33:01:866 | [INFO] | | UPDATER | CORE | | | | 244766 | UCGetprogress : Updates download returning state = 43
09/17/13 10:33:01:866 | [INFO] | | UPDATER | CORE | | | | 244766 | UCGetprogress : Updates download returning outError = 212
09/17/13 10:33:01:866 | [INFO] | | UPDATER | CORE | | | | 244766 | UCGetprogress : Updates download returning percent = 0
09/17/13 10:33:01:866 | [INFO] | | UPDATER | CORE | | | | 244766 | UCGetprogress : Updates download returning unique error code string = U43M1D212
09/17/13 10:33:02:006 | [INFO] | | UPDATER | CORE | | | | 236256 | Stepped into << UCTerminate >> call.
09/17/13 10:33:02:006 | [INFO] | | UPDATER | CORE | | | | 236256 | EndUpdateInstallerSubsystem : Sent Packet kID_Done to Installer sub-system.
09/17/13 10:33:02:006 | [INFO] | | UPDATER | CORE | | | | 236256 | Entering into <<TerminateUpdaterCoreIPCAndWaitforThread>>.
09/17/13 10:33:02:006 | [INFO] | | UPDATER | CORE | | | | 236256 | TerminateUpdaterCoreIPCAndWaitforThread : Setting both IPC loop control variable to false.
09/17/13 10:33:02:006 | [INFO] | | UPDATER | CORE | | | | 236256 | TerminateUpdaterCoreIPCAndWaitforThread : Waiting for ThreadInstallRequestHandler to complete.
09/17/13 10:33:02:006 | [INFO] | | UPDATER | CORE | | | | 236256 | Stepped into << AdobeUpdaterWaitOnThread >> API
09/17/13 10:33:02:068 | [INFO] | | UPDATER | CORE | | | | 251256 | ThreadInstallProgressHandler : Terminating IPC channel for Install control
09/17/13 10:33:02:068 | [INFO] | | UPDATER | CORE | | | | 251256 | ThreadInstallProgressHandler : Releasing IPC Object for Install control
09/17/13 10:33:02:068 | [INFO] | | UPDATER | CORE | | | | 236256 | Returning from << AdobeUpdaterWaitOnThread >> API
09/17/13 10:33:02:068 | [INFO] | | UPDATER | CORE | | | | 236256 | Returning from <<TerminateUpdaterCoreIPCAndWaitforThread>>.
09/17/13 10:33:02:069 | [INFO] | | UPDATER | core | ETSAnalytics | | | 236256 | Waiting for the async thread to get the task completed
09/17/13 10:33:02:072 | [INFO] | | UPDATER | core | ETSAnalytics | | | 251255 | Async thread is completed. Now exiting from function.
09/17/13 10:33:02:074 | [INFO] | | UPDATER | CORE | | | | 236256 | Returning from << UCTerminate >> call with value = 1
09/17/13 10:33:02:074 | [INFO] | | UPDATER | CORE | | | | 236256 | UpdaterCoreImpl::ShutdownLogFile : Going to call ShutdownESDLogFile()
09/17/13 10:33:02:074 | [INFO] | | UPDATER | CORE | | | | 236256 | <<< Adobe Updater Log End <<<

Anti Virus for Leopard.

Hi I'm looking for some advice with regard to Anti Virus Software on my new iMac. I'm not adverse to paying but if I can get a free ware AV program that would be great. ive here mentioned AGV and Avria, the former seems to be Windows only and the latter only has a freeware (Home) version on Windows. The mac version is 60 days, then you pay... Also are all these and other AV programs all ok on Leopard?
Many Thanks
Harry

Never shutting your Mac down properly (i.e. letting it sleep is NOT shutting it down) will effect your performance more unless you open up a program directly effected by a virus (macros are infamous for clogging up the various Mac MS Office versions).
There are a few holes known to Firefox, partially because it is one of the most prevalent browsers out there and there are many accessories for it. Safari has fewer security warnings, though there are a few websites (a few very major ones at that) that are optimized for it and will not display properly; if you like Safari, use it primarily and keep another browser (like Firefox) on for situations when you come to a site that won't load correctly in Safari. I should note that I am still on 10.4.11 and use Firefox as it has more features I personally use/like, in addition to regularly running Virex 7.2 with weekly-updated definitions. I do wish AVG would come to Mac though.
Overall, you don't want to be unprotected just because OS X is only indirectly affected by viruses, nor do you want to be a digital Typhoid Mary and spread infections to other OSes through laziness or complete self-centeredness- and it's not just Windows users which are effected.

Questions for experienced users

For all experienced users, a few observations and questions:
1) Is it really true that Compressor 2 takes over 24 hours to encode a 15 minutes piece of 1080i HD video from FCE into an H.264? or am I doing something wrong in the settings?
2) The same piece of video encodes a QT movie in 2 hours but the artifacts make the video look extremely unprofessional (to put it mildly).
3) It cannot be true that after spending this much money on professional equipment, that I receive results this poor. I see that others have voiced the same frustrations with Compressor 2 and DVDSP4, HD video etc. What I am referring too specifically is poor encoding in Compressor ( the answer "get a different piece of software" is not acceptible) and DVD's that have artifacts that make the results look worse in quality that amature video from several years back,
this is why I and others depend on sage counsel from more experienced users. so people with condescending or sarcastic pseudo answers need not reply here.
4) Please recommend a workflow that does not produce artifacts from 1080i HD video, to FCE 3.0.1, to DVDSP4 ( via QT 7 or Compressor 2) using the system speced below.
5) Please also recommend a workflow of the same for video that can go out on the web or for cell phone content. ( refer to the problems with H.264 with web content, and any info you may have on the 3G content)
Thanks
BBP/BR

Well, Mikey and PQRTV or whatever really got to the heart of the reason why I placed that line in my first post:
I got my mac system about a year ago. before I got the system, my cousin the computer genius lovingly teased me because I literally didn't know what a jump drive was. 8 months later, I gave a presentation at the apple store about filmmaking with the mac. my point?
using the mac system as a (professional) tool does require a new thought process ( coming from the PC windows lower ****). I too look(ed) for quick fixes, but a little bit of time with FCE, DVDSP4, Compressor, etc. teaches U very quickly that things take time and patience and study. having no previous IT or computer background, it was and still is a challenge, but I get it more now.
in general, just keep in mind that a post may be from someone who 1) might be new to the idea that You have to think a bit differently when trying to execute processes with a mac/professional system, 2) might not have a whole lot of IT experience ( mac makes it really easy to get Your arms in up to Your elbows really quickly), and 3) is after all a human being who is, when they posted, 4)most likely sleep deprived, working on a dead line and stressed at level 11.
and Yo PD, I thought the weeding video quip was kinda funny but snide. we can at some point "philosofahzize" about what kind of hussle one sometimes has to get into to keep the rent paid while pursuing the real dream.
And as my man Mikey pointed out ( and I'm sure PDFTV and others will agree), authoring, filmmaking, graph design, music, is all an ART FORM and CRAFT and it takes dedication and perseverence to "master" just ONE aspect, let alone those of us who write, produce, shoot, edit, author, burn, make the soundtrack for, make the poster for and finance our own projects. ( raise a fist and go "yeah" if U feel me on that!)
so if U are a newbie, KEEP THAT IN MIND when U are about to pound Your head or the computer or both against the wall becuase it doesn't happen the first time You try.
ANYWHOOOO
I exported the 1080i HD video ( 10 minutes long) from FCE 3.0.1 compression type 1080i60, current frame rate, key frames every 24 frames ( we shot with that cineframe funtion on the camera) and checked frame reordering. data rate automatic and NOT prepared for web streaming. sound: uncompressed 48kHz ( I wanted to take it into DVDSP4) I got a GREAT LOOKING but rather large (1.45 GB) QT movie . my subtitles at the bottom made in FCE looked a bit fuzzy at full screen size, but the Live Type looked GREAT. NO ARTIFACTS in any size. BUT UNFORTUNATELY, DVDSP4 agve me an "imcompatable asset" message when I tried to import it. ( and by the way, it took 2hrs and 10 min to process to QT movie)
SOOOOO.....
From FCE I exported the file to compressor 2, setting: the 90 minute best quality 16:9 MPEG 2 6.2 mbps 2 pass setting. this bad boy LOOKS GREAT and took a whopping 10 HOURS to compress. but my sound file didn't come out (?) so I exported QT movie sound only from FCE and this took 10 seconds. brought them into DVDSP4 and got myself a pretty kick a@@ looking widescreen SD video.
oh, my DVSP4 settings? 4:3 letter box, encode on import ( although since it was already an MPEG2 it was no sweat) with 6.0 mbps min and 7.5 max.
I'll keep in touch on other posts with more experiences. Thanks for the help!
and with this post concider the question offically, answered!
peaceBBP/BR
www.blackbusterproductions.com
www.blackdawnrecords.com

AGV 7.5

Similar Messages

Maybe you are looking for