AHCI trouble on x120e w/ XP

I've been struggling for a few days with this problem, can anybody offer a fix? I'd appreciate it a lot!
Here's the situation:
I have a new x120e, normal specs (see here). I installed XP because the machine didn't run Windows 7 very smoothly.
I followed this guide (link) to load XP via a USB (because the x120e doesn't have a CD drive). With nlite I slipstreamed my old copy of XP professional 2002 SP3 to include the x120e drivers. After a successful installation XP was up and running. Only catch-- windows won't start unless I enter BIOS and set Serial ATA (under config) to "Compatability" mode instead of AHCI.
As far as I understand it, AHCI should offer better performance, so it would be desirable to get the machine working with that again (responders, please confirm?). In an ideal world, I would have preempted the problem by installing the AHCI driver from a floppy with an F6 install before XP. I don't have a floppy drive so I'm looking for another solution.
I do not I have tried two approaches from guides online:
1) Slipstreaming the driver into the XP installation using Nlite. No luck.
2) Putting the driver into system32\drivers and changing various registry values, as suggest here (link; see post by kaede). The driver/registry approach should have allowed my machine to just recognize the "new" hardware and add it as normal. No luck.
So, can someone knowledgable tell me:
1) If it is indeed advantageous to try to go to all this trouble to enable AHCI?
2) If this is the correct driver (link)? The laptop also has, in the drivers folder, a number of other drivers (WS03x64, WS03x86m, LHx64, LHx86, Win7x64, Win7x86) but I think these are for Vista, 7, and Windows Server 2003.
3) How I might enable AHCI?
Thanks!

Hello,
Have you tried installing a non-nLite'ed version of Microsoft Windows XP Professional SP3 to the ThinkPad X120e's hard disk drive and then tried installing making the appropriate registry change and AHCI driver installation?  If so, what were the results?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
  Deutsche Community   Comunidad en Español Русскоязычное Сообщество

Similar Messages

  • X120e SSD Installation trouble.

    Hello,
    I have recently purchased an X120e and wish to put an SSD in it.  However, since the PCI-e mini port cannot handle msata SSDs, I do not know how to transfer the OS from the included hard drive to the Intel SSD.  Intel has a migration tool, but it requires that both drives be connected to the computer at once. 
    How have other people accomplished this?
    Thanks much,
    El Capitan.

    Hello,
    When cloning a ThinkPad's hard disk drive, I have found it works best to first install the new, blank drive inside the ThinkPad and then connect the old hard disk drive via USB (or a drive bay, if using a model that supports them, like the T-series).  This gets around issues with the new drive not booting successfully (possibly due to differences in drive geometry).
    As an alternate method, one thing I would suggest is that you first make the recovery media using the version of Microsoft Windows preloaded by Lenovo on the original hard disk drive, remove the original hard disk drive, and use the recovery media to install the Lenovo software image to the new SSD.  This avoids any issues from performing a straight disk imaging (problems with alignment due to differences in sector size, bootable drive geometry issues and so forth) and allows you to verify the recovery media works before you actually have a need to use it in an emergency/critical situation.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Trouble AHCI controller - OCZ SSD for HP DM1Z xl303av

    To anyone out there who has upgraded their DM1Z to an SSD how did you successfully do it without the option to change your bios setting to AHCI? I have spent several hours researching and several more experimenting with no luck. It is my understanding that the SSD won't properly work with an IDE controller (which is partially confirmed by my system locking up) yet people have successfully upgraded their HP DM1Z to a SSD. How?  I have already checked to make sure the OCZ SATA 3 drive has the latest firmware and that I have the most current bios updates yet my system is still locking up and IDE is still showing up under the device manager with a standard AHCI controller under it.

    I have the same question - sorry I can't be of help. Just bumping this thread, however...
    I have an OCZ Solid 3 that I'm about to install.... just wondering if it is "worth it".

  • Windows 8 64-bit install on 970a-g46 Mainboard AHCI and NVIDIA DRIVER issues

    My Box:
    MSI 970A-G46
    BIOS 1.9  (AUG 2012) (Tried 1.11 but the nightmare started then)
    AMD FX-6100 (STOCK SPEED AND SETTINGS) WITH OEM HSF
    16GB PATRIOT VIPER 3 (1866) RUNNING @ (1600)
    USED an EVGA 9800GT 1ST AND UPGRADED TO NVIDIA REFERENCE CARD GTX 550 Ti (1GB) WITH SAME ISSUES
    90gb MonsterDigital Daytona SATA III SSD DRIVE (OS and minimal programs)
    Antec HE 550
    I am at a point of pulling my hair out. I decided to upgrade my system to enhance Diablo III game play. I got a combo deal on the mainboard and cpu, and thought the speed of the game caching on a SSD would also help. The first attempt which took a little struggle was Vista 64-bit. Eventually, I was able to get the OS to work with me, and it was smooth.  Since M$ decided to offer the Windows 8 Pro upgrade for only $39.99, I thought, what do I had to lose. Well….lots of time. Now, I am not a newbie, though SSD drives haven’t been more than an interesting thought. So yes, I read many guides on everything from Trim enabled Win 7 and 8, and many other do’s and don’ts. What is driving me to the Netherlands of hell, is the installation and how buggy it has been. It boils down to drivers for the IDE/SATA/AHCI CONTROLLER. First, even thought it “sees”  the SSD on installation drive selection, after pulling the USB installation drive, the system forgets it, and there is a “problem with the boot sector”. If you load the driver from the AMD site, it lets the install occur “fine”, but there is an issue with that driver which causes an irq conflict which leads to D3 audio issues and freeze ups. I did finally get things in order (not sure which driver I choose for that), and things were smooth, except I tried to install the GTX 550 ti and that led to a corrupt file error, which the system runs a check disk and cycles the “preparing to repair” and “diagnosing PC” a few times and never allows me to enter SAFE MODE (shift+f8), to disable the NVIDIA driver that is buggy, and doesn’t allow for the NVIDIA Control Panel to install without losing video, and starts the repair cycles again… Leading to ANOTHER RE-INSTALL...
    My question, for the Windows 8 Pro installation on the 970a-G46 mainboard and then after install is complete, which driver is the correct choice for the AHCI/SATA Controller?  All I find is Win7 64-bit AHCI inf’s, and SB7XX 64-bit inf’s (no SB950 INF). The Driver disk which came with the mainboard is very dated pre Win 8 stuff, ASMEDIA X106 which are not recognized by the OS as written for Win 8. AMD’s latest drivers are the ones causing the IRQ type lags and corruption.
    What version, build and type of Windows 8 installations have you used on this mainboard, and what drivers allowed you install it without the above conflicts? Your input may decrease my insanity… So, thank you in advance…

    Quote from: m0r9h3u5 on 28-January-13, 12:11:16
    I understand what you are telling me,  only the generic drivers deliver subpar results. What is the point of running those drivers instead of windows 8 certified drivers written for said devices. My last install is functioning better, but still windows update fails every attempt, the apps i install (ie. weather bug) on the start screen wont load... to me windows 8 is a big fail....but that is just my view...
    OK...I also own the 970a G46, and my upgrade experience from Win7 x64 AHCI to Win8 x64 AHCI was flawless the first time.  No problems at all.  You are running an AMD chipset board with a nVidia gpu, which means that your chipset drivers are not automatically updated with every gpu driver update you do--this would happen automatically if you owned an AMD gpu because AMD includes them in its gpu driver install packages.  But--all you have to do to get the proper drivers for your motherboard is go here and download them.  You only need the *chipset drivers* from this page--you do not need the RAID drivers, of course.  That's it.  It's no big deal, and back in the days when nVidia was making motherboard chipsets you had to separately download both the motherboard chipset drivers from nVidia and the AMD gpu drivers from AMD if you did not also own a nVidia gpu.
    From your description of your problems it sounds like your installation of Win8 is hosed and you need to format C:\ and clean install from scratch, anyway, so...
    A note about AHCI--the *ideal* way to install the AHCI drivers is prior to installing your OS for the first time, you enter the UEFI and set "AHCI" in the appropriate place, instead of IDE, and *then* you reboot from DVD and install your OS which will automatically install the correct AHCI driver from Windows.  After the driver installation is complete you should then install the updated 970a drivers from AMD as linked above.
    However, it is actually very easy to activate and install AHCI *after* you have installed Windows in normal IDE mode:
    To enable AHCI in existing Windows 8 IDE Installation's
    Caution: Do NOT enable AHCI in UEFI prior to making the following changes in your Registry! If you had AHCI enabled alreadyin UEFI, disable it first and restart your computer!
    Use WinKey + R and type Regedit in the command line and hit the Enter key, this will open the Registration Editor.
    Go to:
        HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/services/iaStorV
        right click on Start, select Modify and set Data Value to 0
    Close Registration Editor and restart computer.
    While booting,  open the UEFI Page and set the SATA Mode to AHCI from IDE
    Save UEFI settings and restart.
    Windows will now install the AHCI drivers automatically and they should work without issues.
    In order to avoid installation problems just like you have been experiencing, here is what I would do in your shoes:
    1) Set UEFI for normal IDE drive mode
    2) Reboot into IDE mode and install your OS
    3) After you have finished with the installation, you should be having no troubles in IDE mode.  Then go to the instructions above on how to properly enable AHCI *after* you have installed Windows 8 in normal IDE mode.
    4) After everything is coming up roses in AHCI mode and you are having no problems, then install the AMD chipset drivers as linked above and you are golden. 
    Those 4 steps worked perfectly for me the first time (the first time I got them right, that is...).
    There's nothing wrong with Win8--this is strictly operator error caused by insufficient research into what AHCI is and how to properly enable it.  The Internet has some bad info on Win8 registry settings for AHCI because of the developer preview and the consumer preview versions of Win8 that Microsoft released to the public prior to the final shipping build--many "instructions" for Win8 are therefore not valid for the shipping version of Win8.  At first I made some of the same goofs that you did, but now you get to benefit from my hard-won experience...  Good luck! Should work like a charm. And, registry AHCI is done differently in Win8 than it is done in Win7 or Vista.  Also, the registry settings relative to AHCI in Windows 8 for AMD are different from the registry values that must be changed for an Intel controller.
    Parenthetically, My FX-6300 (Vishera) will be here in a couple of days! Yeah!

  • Compilation of Lenovo X120e issues and solutions

    Just thought a compilation of issues may be beneficial for folks who own an X120e.
    Screen adjusts brightness automatically without user input depending on content on screen:
    http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/X100e-screen-brightness-increasing-by-itself/td...
    This is caused by Vari-Bright being enabled in the Catalyst Control Center.  With this option enabled, the screen will automatically adjust its brightness depending on what is shown on the screen.  The display brightness is increased when the screen is predominantly white while the display brightness is decreased when the screen is predominantly dark.  An easiest way to see this effect happening is to have two tabs opened in a web browser window.  Set one tab to display a website that is mainly filled with white pixels (such as this Lenovo Forum) and another tab to display a website that is mainly filled with dark pixels (such as http://www.krijtenberg.nl/ ).  Switch between the two, pausing a few seconds in each tab.
    Solution:
    Open the Catalyst Control Center and select the PowerPlay option in the Power section.  Uncheck the Vari-Bright option (or adjust the slider) and click Apply.  Verify that the automatic adjustment is no longer occuring by doing the two tab experiment described above.
    Function keys for brightness control not working after waking from sleep / hibernation in some instances:
    http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-Funtion-keys-for-brightness-not-working/t...
    For my X120e, whenever I have it sleeping or hibernating and change the power source (such as initiating sleep when on power and then waking it up while on battery, or vice versa), the function keys for brightness controls do not work.
    Solution:
    Restarting the machine will bring back functionality of the brightness control keys...
    A way to prevent this from happening in the first place is to wake the X120e in the same power state that the X120e was put to sleep in (wake up from power adapter if slept while connected to power adapter, or wake up from battery if slept while on battery).   
    All we can do now is wait for Lenovo to come up with a fix on their side of things.
    AMD SATA Controller and TRIM for SSD:
    The AMD SATA Controller provided by Lenovo does not support passing of TRIM command according to http://www.hardwarecanucks.com/forum/450343-post35.html for SSDs.  The Lenovo provided AMD SATA Controller is 1.2.1.197, before the official TRIM support in 1.2.1.263.  If you're using a HDD, this is of no concern.
    Solution:
    In order to have support for passing of TRIM command, one has to update the AMD SATA Controller to any version above 1.2.1.263 ( http://sites.amd.com/us/game/downloads/Pages/integrated_win7-64.aspx#3 for Windows 7 64-bit, for example) or uninstall the AMD SATA Controller to revert back to Microsoft's Standard AHCI 1.0 Serial ATA Controller. 
    Disclaimer:  Since the AMD SATA Controller driver linked is not from Lenovo themselves, I'm sure they won't provide any support if something is to occur so try at your own risk.
    As HP79 mentions below, at least according to the update notes, TRIM implementation is implemented for Hudson chipsets as of 1.2.001.263.
    Audio Stutter / Slurring occuring during playback of video/audio:
    http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-Stuttering-Audio/td-p/389023
    This issue can be reproduced (at least on my X120e) by waking the X120e after putting it to sleep.  The symptom is the audio repeating a sound over a span of a second or two during playback and is quite noticable. 
    Solution:
    uEFI Bios version 1.11 seems to deal with the audio stuttering issue.  So far, results lead to positive outcomes.
    Old Solution:
    PWMTR64V.DLL that is loaded at Startup seems to be causing this issue.  Disabling it from launching when starting up seems to cure the Audio Stutter (even after waking up from sleep which was seen to be a pretty reliable way to get the issue to repro).  Start Menu > Launch MSCONFIG from the Search Bar > Select Startup Tab from the System Configuration window > Uncheck Thinkpad Power Manager > Restart. 
    This does not seem to turn off the power manager application itself so settings in Power Manager can be saved and it seems to still be in effect.  However, opening up Power Manager from the notification / taskbar can cause audio stuttering and mouse movement slowdown while it is launching and/or when applying settings.  This is only temporary and is gone when Power Manager is closed. (Thanks kns7977 for the find)
    Pending to see if those who uninstalled Power Manager are able to turn off the offending startup .dll.
    Mouse seems to stutter or stay in place for a moment when moving:
    This seems to be caused by the same issue causing the Audio Stutter / Slurring.  At least at this time, the cause of the issue and solution seems to be the same.
    Emulating Middle Mouse Button with Trackpoint:
    One can set up the middle button between the left and right click button for the TrackPoint to act like pressing a middle mouse button on a standard mouse by changing the scrolling type to Smooth instead of the default Standard. 
    Control Panel > Hardware & Sound > Mouse > UltraNav Tab > Setting for TrackPoint > Setting for Choose Scrolling or Magnifying Glass Function > Smooth.
    Trackpad's two finger gesture being hit or miss:
    The trackpad's two finger scrolling is very hit and miss.
    http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/X120e-Touchpad-issues/td-p/393751
    Solution: Turning off Gesture Filtering may alleviate the problem.  As mentioned in http://forum.notebookreview.com/lenovo-ibm/561751-x120e-owners-thread-24.html#post7323293, it seems that the Gesture Filtering is counteracting any sort of two finger input.
    Get to Mouse Properties by Fn + F8, select Manage Settings.  At Mouse Properties, select the UltraNav tab > Settings for TouchPad.  Expand the Smart Check Settings, highlight Gesture Filtering, and uncheck the Enable Gesture Filtering box and Apply. 
    Screen flickers lines:
    http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-Flickering/td-p/389523
    Had this issue occur on me once, but never seen it happen again.  Unsure what caused or cured it.
    Solution:
    If the flickering is occuring, a restart is all that is needed to alleviate the problem.  Haven't tested if hibernation fixes it, but neither sleep nor turning off the screen with the Power Manager dealt with the flickering.
    3-Cell Battery mentioned as a 40Wh in the Order Page of Lenovo X120e when it is actually rated as 32Wh according to Power Manager:
    http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/X120e-3-cell-40Wh-battery-reported-as-32Wh-by-P...
    Yeah...
    Solution:
    Accept that it's a 32Wh you will get when selecting 3-Cell or go for the 6-Cell if you want more than 32Wh.
    2x2 ABGN Driver from Lenovo triggering Error Code 10:
    http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/X120e-ABGN-Driver-issue-in-Windows-7-Pro-x64/td...
    The Wireless driver from Lenovo's site seems to not work with the 2x2 ABGN wireless when installed on a fresh copy of Windows 7 x64.
    Solution: 
    Not really quite a solution, but one can bypass this by either installing the 32-bit Windows 7 and installing the 32-bit driver, or using the factory recovery disc to install 64 bit windows 7 to have it install drivers that work for x64 windows 7.
     X120e bluescreens after installing LAN Realtek 7.26.902.2010 drivers from Lenovo's Driver download site.
    http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-bluescreen-when-installing-lan-drivers/td...
    The drivers doesn't seem to work and it causes a bluescreen on fresh installed Windows 7 x64.
    Solution:
    As Clicq suggests, Realtek's own drivers from http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy... seems to deal with the issue. 
    Screen quality on the X120e:
    http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-poor-LCD-quality-viewing-angles/td-p/3945...
    The quality of the screen on an X120e is below expectations.
    This is common with low-quality TN panels not helped by glossy displays.  My personal X120e screen likes to bleed certain colors of red.
    Solution (not really): 
    One can use the Windows 7 built-in color calibration tool to adjust the colors to make it more tolerable.  Adjusting your own viewing angle in relation to the screen might deal with some color issues (hard to figure out what's the correct viewing angle because of TN panel's small range of optimal viewing angles).  Also, changing the refresh rate to 60Hz may deal with some headaches due to the screen (as it did for me).
    HDMI Overscan to HDTV issue:
    http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/HDMI-overscan-to-HDTV-issue-on-x120e/m-p/395335
    There is a black border when outputting to HDTV through HDMI.
    Solution:
    AMD's CCC by default sets a specific value for overscan / underscan.  One can http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Output-to-TV-via-HDMI-port-black-border-on-the-... while the device is connected via HDMI (the option is hidden if the HDMI port is not used) and adjust the slider to an acceptable value.
    Skype asserts after 10-20 seconds of video chat:
    http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/x120e-Skype-quits-after-10-20-seconds-of-video/...
    When doing a video chat, the video feed will freeze and then skype will crash to desktop.
    Solution:
    Version 5.3 of Skype seems to be the culprit.  Until Skype itself is fixed, one can use Skype 5.2.60.113 from http://www.filehippo.com/download_skype/changelog/9465/ to bypass this issue.  Just reject any offer to update to 5.3 after installing 5.2, for now.
    If there is anything I missed, please respond and I'll update this post with new information.  These are the ones that I have encountered so far with my Lenovo X120e.  Don't get me wrong, I like my X120e... it's just been a "learning" experience lol
    For a compilation of most X120e issues:
    Compilation of Lenovo X120e issues and solutions

    About the AHCI driver, if you download and open the install file, it'll extract files to where you instructed it to. Look in AMD SB7xx/W764A directory, and there are the AHCI files along with a text file. In that text it shows 
    AMD AHCI controller driver distribution list
    Version 1.2.001.0275, 11/11/2010
    Supported chipsets
    SB700 family
    SB800 family
    Hudson-1/2/3 family
    Revision History
    1.2.001.0275
    -          Memory usage optimization
    -          ZPODD power on incurred 10 sec delay workaround
    -          Potential DMA overrun bug fix
    1.2.001.263
    -          Performance optimization
    -          Boot Optimization
    -          TRIM implementation
    1.2.001.0238
                Renamed
    -     amdsata.inf -> amd_sata.inf
    -     amdsata.cat -> amd_sata.cat
    -     amdsata.sys -> amd_sata.sys
    -     amdxata.sys -> amd_xata.sys
    Added
    -     Zero Power ODD support (if enabled in BIOS; Windows 7 only); the ZPODD is powered off after 60 Sec w/o media inside and tray closed (for tray type ZPODDs)
    -     DAPS support
    -     DIPM Setting Index 3 added to AHCI Link Power Management Settings (in addition to existing Active(0), HIPM(1) and HIPM+DIPM(2) ) and can be chosen to any Power Scheme using the inbox utility powercfg.exe
    1.2.0.197
    -     Robustness improvement during hibernation / de-hibernation

  • MSI GE60 2OE - blocked, Win 8.1 trouble

    First of all, Hello everybody!
    I'm in big trouble with my MSI, I got stuck and don't know what else to do. I have been trying to fix for three days, looking for information, I have read most of sticky post and searching in the forum and I haven't found any working solution.
    I purchased my GE60 2OE about two months ago. I have been used it happily since first day with Win 8.1
    I installed a mSata SSD and removed the old hard disk in order to make a clean install, then I started to install Win 8.1 but I cancelled it just after the installer formats the hard disk (I was installing it on the mSata) in the same installer I erased the partitions created so I could restart the installation from the beginning, but when I cancelled and restarted the installation the problem was there:
       The laptop starts and stops just at the beginning, with a blank screen. When I restart and press F12 or supr, or F11 for selecting boot device, a single line appears but I can't get into the bios neither select any device. I have discovered, that removing any hard disk and starting only with the Usb with Win 8.1 installer, first appears the blue windows logo, after that a blue screen appears: "your pc got into a problem and needs to restart..." "acpi bios error" and immediately reboots in a loop with the same thing. May be it's a error with the uefi Bios and Win 8.1
    The current bios version: E16GCIMS.517 (I updated it, I think it was fine, installation went OK and I restarted the laptop twice)
    The set up in the bios was AHCI, and UEFI.
    Also I remember just before the installation I changed not to display the msi logo, just for trying what happened.
    Well, I have tried with many rescue bootable Usb, linux distributions, and none of then starts, it just freezes at start with a blank screen.
    I can't get into the bios, even I can't flash it, I have tried with bootable usb with bios flashing and nothing.
    I have read that clearing the CMOS may help, but I can't find any jumper or button in the laptop, I have tried to unplug AC, disconnect the motherboard power for few minutes, etc. and no results.
    I don't know what else I can do. Please, any different point of view or any help would be welcome.
    Thank you very much!

    Quote from: Mike1793 on 20-January-14, 01:09:25
    nvm problem solved =D
    Same prob here. I installed win8.1 and the light is orange always. How did u solve this?

  • HOW TO install RAID/ AHCI 975x PUE Driver Guide

    As below on how to install the matrix driver, there is no 'how to install on a system not already preconfigured with raid/AHCI'. This driver creates a F6 Floppy disc, why? because windows will  not recognise your hard in AHCI mode without the driver installed. This is why we get a reboot with AHCI enabled. It gets to a point then when windows loads with no driver it reboots. If you try to load the driver first, the hard ware has not been enabled so there is nothing to install. Reinstall Windows is the only way.
    * 5.  INSTALLING THE SOFTWARE
    5.1 General Installation Notes
    1.  If you are installing the operating system on a system
        configured for RAID or AHCI mode, you must pre-install
        the Intel(R) Matrix Storage Manager driver using the
        F6 installation method described in section 5.3.
    2.  The 'Intel(R) Chipset Software Installation Utility'
        must be installed on the system after a supported
        Microsoft* Windows* operating system has been installed.
    3.  To install the Intel(R) Matrix Storage Manager,
        double-click on the self-extracting and self-installing
        setup file and answer all prompts presented.
    4.  By default, all installed files (readme.txt, help, etc.)
        are copied to the following path:
        <bootdrive>\Program Files\Intel\Intel(R) Matrix Storage Manager
    5.2 InstallShield* Installation from Hard Drive or CD-ROM
    Note: This method is applicable to systems configured for
          RAID or AHCI mode.
    1.  Download the Intel(R) Matrix Storage Manager setup file
        and double-click to self-extract and to begin the setup
        process.
    2.  The 'Welcome' window appears. Click on the Next button
        to continue.
    3.  The 'Uninstallation Warning' window appears. Click on
        the Next button to continue.
    4.  The 'Software License Agreement' window appears. If you
        agree to these terms, click on the Yes button to
        continue.
    5.  The 'Choose Destination Location' window appears.
        Click on the Next button to continue.
    6.  The 'Select Program Folder' window appears.  Click on
        the Next button to continue installing the driver.
    7.  If the InstallShield* Wizard Complete window is shown
        without a prompt to restart the system, click the Finish
        button and proceed to step 8. If it is shown with a
        prompt to restart the system, click 'Yes, I want to
        restart my computer now.' (the default selection) and
        click the Finish button.  Once the system has restarted,
        proceed to step 8.
    8.  To verify that the driver was loaded correctly, refer
        to Section 6.
    5.3 Pre-Installation Using the F6 Method
    Note:
          The Steps 1 and 2 can be skipped if you use the F6 Floppy
          disk utility provided by Intel. This utility can also be
          downloaded from the following website. These methods
          are applicable to systems configured for RAID or
          AHCI mode.
    http://downloadfinder.intel.com/scripts-df/Product_Filter.asp?ProductID=1809   
    1.  Extract all driver files from the installation package.
        See Section 7.2 for instructions on extracting the
        files.
    2.  Create a floppy containing the following files in the root directory:
        iaAhci.inf, iaAhci.cat,
        iaStor.inf, iaStor.cat,
        iaStor.sys, and
        TxtSetup.oem.
    3.  At the beginning of the operating system installation, press F6
        to install a third party SCSI or RAID driver.
    4.  When prompted, select 'S' to Specify Additional Device.
    5.  When prompted, insert the floppy disk you created in
        step 2 and press Enter.
    6.  At this point you should be presented with a selection
        for one of the following depending on your hardware
        version and configuration:
        - Intel(R) 82801GR/GH SATA RAID Controller (Desktop ICH7R/DH)
        - Intel(R) 82801GR/GH SATA AHCI Controller (Desktop ICH7R/DH)
        - Intel(R) 82801FR    SATA RAID Controller (Desktop ICH6R)
        - Intel(R) 82801FR    SATA AHCI Controller (Desktop ICH6R)
        - Intel(R) 82801FBM   SATA AHCI Controller (Mobile  ICH6M)
        - Intel(R) 82801ER    SATA RAID Controller (Desktop ICH5R)
        - Intel(R) 6300ESB    SATA RAID Controller
    7.  Highlight the selection that is appropriate for the
        hardware in your system and press Enter.
    8.  Press Enter again to continue. Leave the floppy disk in
        the system until the next reboot as the software will
        need to be copied from the floppy disk again when setup
        is copying files

    Well I went for it, RAID that is. I borrowed a 300GB SATA II Seagate Barracuda from work to backup to and got started. I shall layout how I did it for those having trouble.
    So my old config was Maxtor SATA II 80 DiamondMax system drive and a Maxtor SATA I 250GB DiamondMax for Data. Now with the 300GB SATA II to backup to and running in IDE mode enhanced with speed disabled in bios. HDTach benchmarking is in above posts for these drives.
    I copied all that data I wanted to extra drive and made a boot floppy and copied the files from the 975xPUE CD for the Intel RAID controller.
    CDROM:\IDE\Intel\ICH7R\Floppy\32
    Now I shut down my system, removed the bachup drive and entered the bios.
    *I set back all my setting to default, no overclock.
    *Integrated peripherals/Onboard JMB361 mode: Disabled JMicron controller
    *Intergrated peripherals/SATA Devices Configuration/SATA Mode/ Set to RAID,
    *SATA Port Speed/Disabled.
    *Set system to boot from CDrom.
    I put in my floppy and the XP CD and rebooted, CTRL +I to enter the Intel RAID setup and first thing I found out was that with my 80GB and 250GB drives in a RAID 0, I was getting 152GB of a logical drive. So I setup the RAID and rebooted.
    80GB+250GB=152GB RAID 0 (I have about 200GB backed up, so I going to have to get another drive, SATA II 300 maybe)
    Now the system booted off the XP CD and as it started to load, it read the floppy and I DID not press F6. I noticed that just before the setup screen the system loaded the driver automatically from the floppy. And low and behold it recognised my hard drive 152GB and I kicked off the install.
    * Note: After Setup had finished formatting the partition, the system loaded the drivers from the floppy again and then started copying files from the CD before restarting to boot from the hard drive. So if you had already removed the floppy, the drivers for the Intel RAID controller would not be loaded and the second stage of install would never get started, blue screen or not recognise you hard drive.
    The rest of the install went very quick and I installed all the drivers and NOW for the juicy bits.
    Ok so I thought, how am I going to read my backup drive which is IDE/SATA on my system if it is in RAID. So I connected the drive to the Jmicron SATA port 5 enabled the JMicron controller in the bios and set it to IDE.
    *NOTE: After I  rebooted the Intel RAID had reverted back to IDE so I had to go back into the bios again and set it back to RAID. When I rebooted I got the Intel RAID slash screen and then the JMicon one showing me the 300GB and asking my to press a button to continue. Quite abit of extra startup time with both enabled.
    Windows loaded fine and both my C: 152GB RAID 0 and D: 300GB were there, but the 300GB was showing as a removable device! I know there is a reg fix for that somewhere.
    Benchmarking: This is the best bit!
    Maxtor Diamond 80GB SATA II and 250GB SATA I = 150GB Logical RAID 0 test with HDTach 3, 8mb test:
               Burst Speed : 320.9 mb/s
               Average Read : 120.3 mb/s
    Now that is some difference from IDE enhanced so well worth the effort!
      IDE:        Burst Speed: 215.3mb/s
                    Average Read: 59.0mb/s
    Now I also tested the Seagate 300GB SATA II drive which is connected to the JMicron controller in IDE mode and the results show that the JMicron does not support SATA II drives but maxes out SATA I: so even if I do buy and extra drive will I be able to add it to the RAID 0 or will I be stuck with SATA I speeds on the JMicrom controller. No doubt I will soon find out.
      Seagate:  Burst Speed: 150.5 mb/s
                    Average Read: 50.5 mb/s
    Thanks for the tip Insomniac34
    Gaucho

  • Real trouble trying to install Catalyst Legacy

    I'm kind of in trouble trying to install catalyst-total-hd234k package from the AUR
    using yaourt to achieve this, enabled the xorg112 package to downgrade, tried pacman directly and makepkg, same result
    It asks a lot of dependencies conflicting with catalyst drivers, so I accept to remove before downgrading to 1.12
    It goes through like if nothing was up after downgrading, package installs without any error
    Following the AMD Catalyst wiki page in here leads me to have a black screen after reboot
    EDIT 2: Process of reproducing the problem I'm facing
    - I enable the xorg112 repository on top of every other in /etc/pacman.conf
    - Downgrade xorg with
    # pacman -S xorg
    :: There are 79 members in group xorg:
    :: Repository xorg112
    1) xf86-input-acecad 2) xf86-input-aiptek 3) xf86-input-evdev 4) xf86-input-joystick 5) xf86-input-keyboard 6) xf86-input-mouse 7) xf86-input-synaptics
    8) xf86-input-vmmouse 9) xf86-input-void 10) xf86-video-apm 11) xf86-video-fbdev 12) xf86-video-intel 13) xf86-video-v4l 14) xf86-video-vesa
    :: Repository extra
    15) xf86-video-ark 16) xf86-video-ast 17) xf86-video-ati 18) xf86-video-cirrus 19) xf86-video-dummy 20) xf86-video-glint 21) xf86-video-i128
    22) xf86-video-mach64 23) xf86-video-mga 24) xf86-video-modesetting 25) xf86-video-neomagic 26) xf86-video-nouveau 27) xf86-video-nv 28) xf86-video-openchrome
    29) xf86-video-r128 30) xf86-video-savage 31) xf86-video-siliconmotion 32) xf86-video-sis 33) xf86-video-tdfx 34) xf86-video-trident 35) xf86-video-vmware
    36) xf86-video-voodoo 37) xorg-bdftopcf 38) xorg-docs 39) xorg-font-util 40) xorg-fonts-100dpi 41) xorg-fonts-75dpi 42) xorg-fonts-encodings 43) xorg-iceauth
    44) xorg-luit 45) xorg-mkfontdir 46) xorg-mkfontscale 47) xorg-server 48) xorg-sessreg 49) xorg-setxkbmap 50) xorg-smproxy 51) xorg-x11perf 52) xorg-xauth
    53) xorg-xbacklight 54) xorg-xcmsdb 55) xorg-xcursorgen 56) xorg-xdpyinfo 57) xorg-xdriinfo 58) xorg-xev 59) xorg-xgamma 60) xorg-xhost 61) xorg-xinput
    62) xorg-xkbcomp 63) xorg-xkbevd 64) xorg-xkbutils 65) xorg-xkill 66) xorg-xlsatoms 67) xorg-xlsclients 68) xorg-xmodmap 69) xorg-xpr 70) xorg-xprop
    71) xorg-xrandr 72) xorg-xrdb 73) xorg-xrefresh 74) xorg-xset 75) xorg-xsetroot 76) xorg-xvinfo 77) xorg-xwd 78) xorg-xwininfo 79) xorg-xwud
    Enter a selection (default=all):
    warning: downgrading package xf86-input-evdev (2.9.1-1 => 2.7.3-1)
    warning: downgrading package xf86-input-joystick (1.6.2-5 => 1.6.1-1)
    warning: downgrading package xf86-input-keyboard (1.8.0-3 => 1.6.2-1)
    warning: downgrading package xf86-input-mouse (1.9.1-1 => 1.8.1-1)
    warning: downgrading package xf86-input-synaptics (1.8.1-1 => 1.6.2-1)
    warning: downgrading package xf86-input-vmmouse (13.0.0-5 => 12.9.0-1)
    warning: downgrading package xf86-input-void (1.4.0-7 => 1.4.0-3)
    warning: downgrading package xf86-video-fbdev (0.4.4-3 => 0.4.3-1)
    warning: downgrading package xf86-video-intel (2.99.917-1 => 2.20.2-2)
    warning: downgrading package xf86-video-v4l (0.2.0-14 => 0.2.0-10)
    warning: downgrading package xf86-video-vesa (2.3.2-5 => 2.3.2-1)
    warning: xf86-video-ark-0.7.5-5 is up to date -- reinstalling
    warning: xf86-video-ast-0.97.0-5 is up to date -- reinstalling
    warning: xf86-video-ati-1:7.5.0-1 is up to date -- reinstalling
    warning: xf86-video-cirrus-1.5.2-4 is up to date -- reinstalling
    warning: xf86-video-dummy-0.3.7-3 is up to date -- reinstalling
    warning: xf86-video-glint-1.2.8-5 is up to date -- reinstalling
    warning: xf86-video-i128-1.3.6-5 is up to date -- reinstalling
    warning: xf86-video-mach64-6.9.4-4 is up to date -- reinstalling
    warning: xf86-video-mga-1.6.3-3 is up to date -- reinstalling
    warning: xf86-video-modesetting-0.9.0-2 is up to date -- reinstalling
    warning: xf86-video-neomagic-1.2.8-3 is up to date -- reinstalling
    warning: xf86-video-nouveau-1.0.11-2 is up to date -- reinstalling
    warning: xf86-video-nv-2.1.20-5 is up to date -- reinstalling
    warning: xf86-video-openchrome-0.3.3-4 is up to date -- reinstalling
    warning: xf86-video-r128-6.9.2-3 is up to date -- reinstalling
    warning: xf86-video-savage-2.3.7-3 is up to date -- reinstalling
    warning: xf86-video-siliconmotion-1.7.7-5 is up to date -- reinstalling
    warning: xf86-video-sis-0.10.7-6 is up to date -- reinstalling
    warning: xf86-video-tdfx-1.4.5-5 is up to date -- reinstalling
    warning: xf86-video-trident-1.3.6-6 is up to date -- reinstalling
    warning: xf86-video-vmware-13.0.2-2 is up to date -- reinstalling
    warning: xf86-video-voodoo-1.2.5-5 is up to date -- reinstalling
    warning: xorg-bdftopcf-1.0.5-1 is up to date -- reinstalling
    warning: xorg-docs-1.7-2 is up to date -- reinstalling
    warning: xorg-font-util-1.3.0-2 is up to date -- reinstalling
    warning: xorg-fonts-100dpi-1.0.3-2 is up to date -- reinstalling
    warning: xorg-fonts-75dpi-1.0.3-2 is up to date -- reinstalling
    warning: xorg-fonts-encodings-1.0.4-4 is up to date -- reinstalling
    warning: xorg-iceauth-1.0.6-1 is up to date -- reinstalling
    warning: xorg-luit-1.1.1-2 is up to date -- reinstalling
    warning: xorg-mkfontdir-1.0.7-2 is up to date -- reinstalling
    warning: xorg-mkfontscale-1.1.1-1 is up to date -- reinstalling
    warning: xorg-server-1.16.3-2 is up to date -- reinstalling
    warning: xorg-sessreg-1.0.8-2 is up to date -- reinstalling
    warning: xorg-setxkbmap-1.3.0-2 is up to date -- reinstalling
    warning: xorg-smproxy-1.0.5-2 is up to date -- reinstalling
    warning: xorg-x11perf-1.5.4-2 is up to date -- reinstalling
    warning: xorg-xauth-1.0.9-1 is up to date -- reinstalling
    warning: xorg-xbacklight-1.2.1-1 is up to date -- reinstalling
    warning: xorg-xcmsdb-1.0.4-2 is up to date -- reinstalling
    warning: xorg-xcursorgen-1.0.6-1 is up to date -- reinstalling
    warning: xorg-xdpyinfo-1.3.1-1 is up to date -- reinstalling
    warning: xorg-xdriinfo-1.0.4-4 is up to date -- reinstalling
    warning: xorg-xev-1.2.1-2 is up to date -- reinstalling
    warning: xorg-xgamma-1.0.5-2 is up to date -- reinstalling
    warning: xorg-xhost-1.0.6-1 is up to date -- reinstalling
    warning: xorg-xinput-1.6.1-1 is up to date -- reinstalling
    warning: xorg-xkbcomp-1.3.0-1 is up to date -- reinstalling
    warning: xorg-xkbevd-1.1.3-2 is up to date -- reinstalling
    warning: xorg-xkbutils-1.0.4-2 is up to date -- reinstalling
    warning: xorg-xkill-1.0.4-1 is up to date -- reinstalling
    warning: xorg-xlsatoms-1.1.1-2 is up to date -- reinstalling
    warning: xorg-xlsclients-1.1.3-1 is up to date -- reinstalling
    warning: xorg-xmodmap-1.0.8-1 is up to date -- reinstalling
    warning: xorg-xpr-1.0.4-2 is up to date -- reinstalling
    warning: xorg-xprop-1.2.2-1 is up to date -- reinstalling
    warning: xorg-xrandr-1.4.3-1 is up to date -- reinstalling
    warning: xorg-xrdb-1.1.0-1 is up to date -- reinstalling
    warning: xorg-xrefresh-1.0.5-1 is up to date -- reinstalling
    warning: xorg-xset-1.2.3-1 is up to date -- reinstalling
    warning: xorg-xsetroot-1.1.1-2 is up to date -- reinstalling
    warning: xorg-xvinfo-1.1.2-2 is up to date -- reinstalling
    warning: xorg-xwd-1.0.6-1 is up to date -- reinstalling
    warning: xorg-xwininfo-1.1.3-1 is up to date -- reinstalling
    warning: xorg-xwud-1.0.4-2 is up to date -- reinstalling
    resolving dependencies...
    looking for conflicting packages...
    Packages (79) xf86-input-acecad-1.5.0-3 xf86-input-aiptek-1.4.1-3 xf86-input-evdev-2.7.3-1 xf86-input-joystick-1.6.1-1 xf86-input-keyboard-1.6.2-1
    xf86-input-mouse-1.8.1-1 xf86-input-synaptics-1.6.2-1 xf86-input-vmmouse-12.9.0-1 xf86-input-void-1.4.0-3 xf86-video-apm-1.2.5-1
    xf86-video-ark-0.7.5-5 xf86-video-ast-0.97.0-5 xf86-video-ati-1:7.5.0-1 xf86-video-cirrus-1.5.2-4 xf86-video-dummy-0.3.7-3 xf86-video-fbdev-0.4.3-1
    xf86-video-glint-1.2.8-5 xf86-video-i128-1.3.6-5 xf86-video-intel-2.20.2-2 xf86-video-mach64-6.9.4-4 xf86-video-mga-1.6.3-3
    xf86-video-modesetting-0.9.0-2 xf86-video-neomagic-1.2.8-3 xf86-video-nouveau-1.0.11-2 xf86-video-nv-2.1.20-5 xf86-video-openchrome-0.3.3-4
    xf86-video-r128-6.9.2-3 xf86-video-savage-2.3.7-3 xf86-video-siliconmotion-1.7.7-5 xf86-video-sis-0.10.7-6 xf86-video-tdfx-1.4.5-5
    xf86-video-trident-1.3.6-6 xf86-video-v4l-0.2.0-10 xf86-video-vesa-2.3.2-1 xf86-video-vmware-13.0.2-2 xf86-video-voodoo-1.2.5-5
    xorg-bdftopcf-1.0.5-1 xorg-docs-1.7-2 xorg-font-util-1.3.0-2 xorg-fonts-100dpi-1.0.3-2 xorg-fonts-75dpi-1.0.3-2 xorg-fonts-encodings-1.0.4-4
    xorg-iceauth-1.0.6-1 xorg-luit-1.1.1-2 xorg-mkfontdir-1.0.7-2 xorg-mkfontscale-1.1.1-1 xorg-server-1.16.3-2 xorg-sessreg-1.0.8-2
    xorg-setxkbmap-1.3.0-2 xorg-smproxy-1.0.5-2 xorg-x11perf-1.5.4-2 xorg-xauth-1.0.9-1 xorg-xbacklight-1.2.1-1 xorg-xcmsdb-1.0.4-2
    xorg-xcursorgen-1.0.6-1 xorg-xdpyinfo-1.3.1-1 xorg-xdriinfo-1.0.4-4 xorg-xev-1.2.1-2 xorg-xgamma-1.0.5-2 xorg-xhost-1.0.6-1 xorg-xinput-1.6.1-1
    xorg-xkbcomp-1.3.0-1 xorg-xkbevd-1.1.3-2 xorg-xkbutils-1.0.4-2 xorg-xkill-1.0.4-1 xorg-xlsatoms-1.1.1-2 xorg-xlsclients-1.1.3-1
    xorg-xmodmap-1.0.8-1 xorg-xpr-1.0.4-2 xorg-xprop-1.2.2-1 xorg-xrandr-1.4.3-1 xorg-xrdb-1.1.0-1 xorg-xrefresh-1.0.5-1 xorg-xset-1.2.3-1
    xorg-xsetroot-1.1.1-2 xorg-xvinfo-1.1.2-2 xorg-xwd-1.0.6-1 xorg-xwininfo-1.1.3-1 xorg-xwud-1.0.4-2
    Total Installed Size: 36.11 MiB
    Net Upgrade Size: -0.52 MiB
    :: Proceed with installation? [Y/n] Y
    (79/79) checking keys in keyring [############################################################] 100%
    (79/79) checking package integrity [############################################################] 100%
    (79/79) loading package files [############################################################] 100%
    (79/79) checking for file conflicts [############################################################] 100%
    (79/79) checking available disk space [############################################################] 100%
    ( 1/79) installing xf86-input-acecad [############################################################] 100%
    ( 2/79) installing xf86-input-aiptek [############################################################] 100%
    ( 3/79) downgrading xf86-input-evdev [############################################################] 100%
    ( 4/79) downgrading xf86-input-joystick [############################################################] 100%
    ( 5/79) downgrading xf86-input-keyboard [############################################################] 100%
    ( 6/79) downgrading xf86-input-mouse [############################################################] 100%
    ( 7/79) downgrading xf86-input-synaptics [############################################################] 100%
    ( 8/79) downgrading xf86-input-vmmouse [############################################################] 100%
    ( 9/79) downgrading xf86-input-void [############################################################] 100%
    (10/79) installing xf86-video-apm [############################################################] 100%
    (11/79) downgrading xf86-video-fbdev [############################################################] 100%
    (12/79) downgrading xf86-video-intel [############################################################] 100%
    (13/79) downgrading xf86-video-v4l [############################################################] 100%
    (14/79) downgrading xf86-video-vesa [############################################################] 100%
    (15/79) reinstalling xf86-video-ark [############################################################] 100%
    (16/79) reinstalling xf86-video-ast [############################################################] 100%
    (17/79) reinstalling xf86-video-ati [############################################################] 100%
    (18/79) reinstalling xf86-video-cirrus [############################################################] 100%
    (19/79) reinstalling xf86-video-dummy [############################################################] 100%
    (20/79) reinstalling xf86-video-glint [############################################################] 100%
    (21/79) reinstalling xf86-video-i128 [############################################################] 100%
    (22/79) reinstalling xf86-video-mach64 [############################################################] 100%
    (23/79) reinstalling xf86-video-mga [############################################################] 100%
    (24/79) reinstalling xf86-video-modesetting [############################################################] 100%
    (25/79) reinstalling xf86-video-neomagic [############################################################] 100%
    (26/79) reinstalling xf86-video-nouveau [############################################################] 100%
    (27/79) reinstalling xf86-video-nv [############################################################] 100%
    (28/79) reinstalling xf86-video-openchrome [############################################################] 100%
    (29/79) reinstalling xf86-video-r128 [############################################################] 100%
    (30/79) reinstalling xf86-video-savage [############################################################] 100%
    (31/79) reinstalling xf86-video-siliconmotion [############################################################] 100%
    (32/79) reinstalling xf86-video-sis [############################################################] 100%
    (33/79) reinstalling xf86-video-tdfx [############################################################] 100%
    (34/79) reinstalling xf86-video-trident [############################################################] 100%
    (35/79) reinstalling xf86-video-vmware [############################################################] 100%
    (36/79) reinstalling xf86-video-voodoo [############################################################] 100%
    (37/79) reinstalling xorg-bdftopcf [############################################################] 100%
    (38/79) reinstalling xorg-docs [############################################################] 100%
    (39/79) reinstalling xorg-font-util [############################################################] 100%
    (40/79) reinstalling xorg-fonts-encodings [############################################################] 100%
    (41/79) reinstalling xorg-mkfontscale [############################################################] 100%
    (42/79) reinstalling xorg-mkfontdir [############################################################] 100%
    (43/79) reinstalling xorg-fonts-100dpi [############################################################] 100%
    Updating font cache... done.
    (44/79) reinstalling xorg-fonts-75dpi [############################################################] 100%
    Updating font cache... done.
    (45/79) reinstalling xorg-iceauth [############################################################] 100%
    (46/79) reinstalling xorg-luit [############################################################] 100%
    (47/79) reinstalling xorg-setxkbmap [############################################################] 100%
    (48/79) reinstalling xorg-xkbcomp [############################################################] 100%
    (49/79) reinstalling xorg-server [############################################################] 100%
    (50/79) reinstalling xorg-sessreg [############################################################] 100%
    (51/79) reinstalling xorg-smproxy [############################################################] 100%
    (52/79) reinstalling xorg-x11perf [############################################################] 100%
    (53/79) reinstalling xorg-xauth [############################################################] 100%
    (54/79) reinstalling xorg-xbacklight [############################################################] 100%
    (55/79) reinstalling xorg-xcmsdb [############################################################] 100%
    (56/79) reinstalling xorg-xcursorgen [############################################################] 100%
    (57/79) reinstalling xorg-xdpyinfo [############################################################] 100%
    (58/79) reinstalling xorg-xdriinfo [############################################################] 100%
    (59/79) reinstalling xorg-xev [############################################################] 100%
    (60/79) reinstalling xorg-xgamma [############################################################] 100%
    (61/79) reinstalling xorg-xhost [############################################################] 100%
    (62/79) reinstalling xorg-xrandr [############################################################] 100%
    (63/79) reinstalling xorg-xinput [############################################################] 100%
    (64/79) reinstalling xorg-xkbevd [############################################################] 100%
    (65/79) reinstalling xorg-xkbutils [############################################################] 100%
    (66/79) reinstalling xorg-xkill [############################################################] 100%
    (67/79) reinstalling xorg-xlsatoms [############################################################] 100%
    (68/79) reinstalling xorg-xlsclients [############################################################] 100%
    (69/79) reinstalling xorg-xmodmap [############################################################] 100%
    (70/79) reinstalling xorg-xpr [############################################################] 100%
    (71/79) reinstalling xorg-xprop [############################################################] 100%
    (72/79) reinstalling xorg-xrdb [############################################################] 100%
    (73/79) reinstalling xorg-xrefresh [############################################################] 100%
    (74/79) reinstalling xorg-xset [############################################################] 100%
    (75/79) reinstalling xorg-xsetroot [############################################################] 100%
    (76/79) reinstalling xorg-xvinfo [############################################################] 100%
    (77/79) reinstalling xorg-xwd [############################################################] 100%
    (78/79) reinstalling xorg-xwininfo [############################################################] 100%
    (79/79) reinstalling xorg-xwud [############################################################] 100%
    - Then I use yaourt (for convenience) to install catalyst-total-hd234k, same happens with catalyst packages when I use catalyst-hd234k repository
    $ yaourt -S catalyst-total-hd234k
    ==> Downloading catalyst-total-hd234k PKGBUILD from AUR...
    x .SRCINFO
    x catalyst-total-hd234k.install
    x fglrx_gpl_symbol.patch
    x cold-fglrx-3.14-current_euid.patch
    x arch_3.13_kernel_acpi_node.patch
    x lano1106_kcl_agp_13_4.patch
    x lano1106_fglrx_intel_iommu.patch
    x foutrelis_3.10_fix_for_legacy.patch
    x gentoo_linux-3.10-proc.diff
    x arch-fglrx-3.8.patch
    x arch-fglrx-3.7.patch
    x 3.5-do_mmap.patch
    x catalyst-hook.service
    x makefile_compat.patch
    x ati_make.sh
    x hook-fglrx
    x arch-fglrx-authatieventsd_new.patch
    x catalyst.conf
    x atieventsd.service
    x atieventsd.sh
    x catalyst.sh
    x lib32-catalyst.sh
    x catalyst_build_module
    x PKGBUILD
    Comment by Vi0L0 (2014-10-09 18:40)
    let me paste form the grill:
    I'm pretty sure that you didn't update catalyst-total-hd234k to version 13.1-28, because there I fixed conflict with ati-dri.
    Comment by doblerone (2014-12-17 19:15)
    During the last update, apparently there are some conflicts between catalyst-libgl and catalyst-total-hd234k. The suggestion is to remove catalyst-total-hd234k.
    Comment by Vi0L0 (2014-12-18 08:14)
    You are probably using libva-xvba-drivers which from yesterday depend on catalyst-libgl, i will add it to provides array after getting back home
    Comment by Vi0L0 (2014-12-18 21:50)
    13.1-29:
    - added catalyst-libgl, opencl-catalyst, lib32-catalyst-libgl and lib32-opencl-catalyst into provides array to satisfy libva-xvba-driver (and maybe other that will come in the future) deps;
    - added linux 3.18 support (i cannot test it actually, i can see it compiles fine though)
    Comment by K3pler (2015-01-05 12:43)
    Planning to replace my ultra outdated x1950pro for a less outdated hd3870 lol.
    And using this driver i probably need to downgrade xorg-server from 1.16 to 1.12 from the aur, right???
    Thanks for your work VioLO
    catalyst-total-hd234k 13.1-29 (mar jun 12 10:59:12 CST 2012)
    ( Unsupported package: Potentially dangerous ! )
    ==> Edit PKGBUILD ? [Y/n] ("A" to abort)
    ==> ------------------------------------
    ==> n
    ==> WARNING: x86_64 system detected
    ==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
    ==> WARNING: OK, lib32-catalyst-utils will be added to the package
    ==> catalyst-total-hd234k dependencies:
    - linux>=3.0 (already installed)
    - linux<3.19 (already installed)
    - linux-headers (already installed)
    - xorg-server>=1.7.0 (already installed)
    - netkit-bsd-finger (already installed)
    - libxrandr (already installed)
    - libsm (already installed)
    - fontconfig (already installed)
    - libxcursor (already installed)
    - libxi (already installed)
    - gcc-libs (already installed)
    - gcc>4.0.0 (already installed)
    - make (already installed)
    - patch (already installed)
    - libxinerama (already installed)
    - mesa>=10.1.0-4 (already installed)
    - lib32-libxext (already installed)
    - lib32-libdrm (already installed)
    - lib32-libxinerama (already installed)
    - lib32-mesa>=10.1.0-4 (already installed)
    - xorg-server<1.13.0 (package found)
    ==> Edit catalyst-total-hd234k.install ? [Y/n] ("A" to abort)
    ==> ---------------------------------------------------------
    ==> n
    ==> Continue building catalyst-total-hd234k ? [Y/n]
    ==> -----------------------------------------------
    ==>
    ==> Building and installing package
    ==> Install or build missing dependencies for catalyst-total-hd234k:
    warning: downgrading package xorg-server (1.16.3-2 => 1.12.4-3)
    resolving dependencies...
    looking for conflicting packages...
    :: xorg-server and xf86-video-ark are in conflict. Remove xf86-video-ark? [y/N] Y
    :: xorg-server and xf86-video-ast are in conflict. Remove xf86-video-ast? [y/N] y
    :: xorg-server and xf86-video-ati are in conflict. Remove xf86-video-ati? [y/N] y
    :: xorg-server and xf86-video-cirrus are in conflict. Remove xf86-video-cirrus? [y/N] y
    :: xorg-server and xf86-video-dummy are in conflict. Remove xf86-video-dummy? [y/N] y
    :: xorg-server and xf86-video-glint are in conflict. Remove xf86-video-glint? [y/N] y
    :: xorg-server and xf86-video-i128 are in conflict. Remove xf86-video-i128? [y/N] y
    :: xorg-server and xf86-video-mach64 are in conflict. Remove xf86-video-mach64? [y/N] y
    :: xorg-server and xf86-video-mga are in conflict. Remove xf86-video-mga? [y/N] y
    :: xorg-server and xf86-video-modesetting are in conflict. Remove xf86-video-modesetting? [y/N] y
    :: xorg-server and xf86-video-neomagic are in conflict. Remove xf86-video-neomagic? [y/N] y
    :: xorg-server and xf86-video-nouveau are in conflict. Remove xf86-video-nouveau? [y/N] y
    :: xorg-server and xf86-video-nv are in conflict. Remove xf86-video-nv? [y/N] y
    :: xorg-server and xf86-video-openchrome are in conflict. Remove xf86-video-openchrome? [y/N] y
    :: xorg-server and xf86-video-r128 are in conflict. Remove xf86-video-r128? [y/N] y
    :: xorg-server and xf86-video-savage are in conflict. Remove xf86-video-savage? [y/N] y
    :: xorg-server and xf86-video-siliconmotion are in conflict. Remove xf86-video-siliconmotion? [y/N] y
    :: xorg-server and xf86-video-sis are in conflict. Remove xf86-video-sis? [y/N] y
    :: xorg-server and xf86-video-tdfx are in conflict. Remove xf86-video-tdfx? [y/N] y
    :: xorg-server and xf86-video-trident are in conflict. Remove xf86-video-trident? [y/N] y
    :: xorg-server and xf86-video-vmware are in conflict. Remove xf86-video-vmware? [y/N] y
    :: xorg-server and xf86-video-voodoo are in conflict. Remove xf86-video-voodoo? [y/N] y
    Packages (23) xf86-video-ark-0.7.5-5 [removal] xf86-video-ast-0.97.0-5 [removal] xf86-video-ati-1:7.5.0-1 [removal] xf86-video-cirrus-1.5.2-4 [removal]
    xf86-video-dummy-0.3.7-3 [removal] xf86-video-glint-1.2.8-5 [removal] xf86-video-i128-1.3.6-5 [removal] xf86-video-mach64-6.9.4-4 [removal]
    xf86-video-mga-1.6.3-3 [removal] xf86-video-modesetting-0.9.0-2 [removal] xf86-video-neomagic-1.2.8-3 [removal] xf86-video-nouveau-1.0.11-2 [removal]
    xf86-video-nv-2.1.20-5 [removal] xf86-video-openchrome-0.3.3-4 [removal] xf86-video-r128-6.9.2-3 [removal] xf86-video-savage-2.3.7-3 [removal]
    xf86-video-siliconmotion-1.7.7-5 [removal] xf86-video-sis-0.10.7-6 [removal] xf86-video-tdfx-1.4.5-5 [removal] xf86-video-trident-1.3.6-6 [removal]
    xf86-video-vmware-13.0.2-2 [removal] xf86-video-voodoo-1.2.5-5 [removal] xorg-server-1.12.4-3
    Total Installed Size: 3.73 MiB
    Net Upgrade Size: -3.31 MiB
    :: Proceed with installation? [Y/n] Y
    (1/1) checking keys in keyring [############################################################] 100%
    (1/1) checking package integrity [############################################################] 100%
    (1/1) loading package files [############################################################] 100%
    (1/1) checking for file conflicts [############################################################] 100%
    (23/23) checking available disk space [############################################################] 100%
    ( 1/22) removing xf86-video-voodoo [############################################################] 100%
    ( 2/22) removing xf86-video-vmware [############################################################] 100%
    ( 3/22) removing xf86-video-trident [############################################################] 100%
    ( 4/22) removing xf86-video-tdfx [############################################################] 100%
    ( 5/22) removing xf86-video-sis [############################################################] 100%
    ( 6/22) removing xf86-video-siliconmotion [############################################################] 100%
    ( 7/22) removing xf86-video-savage [############################################################] 100%
    ( 8/22) removing xf86-video-r128 [############################################################] 100%
    ( 9/22) removing xf86-video-openchrome [############################################################] 100%
    (10/22) removing xf86-video-nv [############################################################] 100%
    (11/22) removing xf86-video-nouveau [############################################################] 100%
    (12/22) removing xf86-video-neomagic [############################################################] 100%
    (13/22) removing xf86-video-modesetting [############################################################] 100%
    (14/22) removing xf86-video-mga [############################################################] 100%
    (15/22) removing xf86-video-mach64 [############################################################] 100%
    (16/22) removing xf86-video-i128 [############################################################] 100%
    (17/22) removing xf86-video-glint [############################################################] 100%
    (18/22) removing xf86-video-dummy [############################################################] 100%
    (19/22) removing xf86-video-cirrus [############################################################] 100%
    (20/22) removing xf86-video-ati [############################################################] 100%
    (21/22) removing xf86-video-ast [############################################################] 100%
    (22/22) removing xf86-video-ark [############################################################] 100%
    (1/1) downgrading xorg-server [############################################################] 100%
    ==> WARNING: x86_64 system detected
    ==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
    ==> WARNING: OK, lib32-catalyst-utils will be added to the package
    ==> Making package: catalyst-total-hd234k 13.1-29 (mié ene 7 22:22:26 CST 2015)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving sources...
    -> Downloading amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 101M 100 101M 0 0 103k 0 0:16:44 0:16:44 --:--:-- 105k
    -> Found catalyst_build_module
    -> Found lib32-catalyst.sh
    -> Found catalyst.sh
    -> Found atieventsd.sh
    -> Found atieventsd.service
    -> Found catalyst.conf
    -> Found arch-fglrx-authatieventsd_new.patch
    -> Found hook-fglrx
    -> Found ati_make.sh
    -> Found makefile_compat.patch
    -> Found catalyst-hook.service
    -> Found 3.5-do_mmap.patch
    -> Found arch-fglrx-3.7.patch
    -> Found arch-fglrx-3.8.patch
    -> Found gentoo_linux-3.10-proc.diff
    -> Found foutrelis_3.10_fix_for_legacy.patch
    -> Found lano1106_fglrx_intel_iommu.patch
    -> Found lano1106_kcl_agp_13_4.patch
    -> Found arch_3.13_kernel_acpi_node.patch
    -> Found cold-fglrx-3.14-current_euid.patch
    -> Found fglrx_gpl_symbol.patch
    ==> Validating source files with md5sums...
    amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip ... Passed
    catalyst_build_module ... Passed
    lib32-catalyst.sh ... Passed
    catalyst.sh ... Passed
    atieventsd.sh ... Passed
    atieventsd.service ... Passed
    catalyst.conf ... Passed
    arch-fglrx-authatieventsd_new.patch ... Passed
    hook-fglrx ... Passed
    ati_make.sh ... Passed
    makefile_compat.patch ... Passed
    catalyst-hook.service ... Passed
    3.5-do_mmap.patch ... Passed
    arch-fglrx-3.7.patch ... Passed
    arch-fglrx-3.8.patch ... Passed
    gentoo_linux-3.10-proc.diff ... Passed
    foutrelis_3.10_fix_for_legacy.patch ... Passed
    lano1106_fglrx_intel_iommu.patch ... Passed
    lano1106_kcl_agp_13_4.patch ... Passed
    arch_3.13_kernel_acpi_node.patch ... Passed
    cold-fglrx-3.14-current_euid.patch ... Passed
    fglrx_gpl_symbol.patch ... Passed
    ==> Extracting sources...
    -> Extracting amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip with bsdtar
    ==> Starting build()...
    Creating directory archive_files
    Verifying archive integrity... All good.
    Uncompressing AMD Catalyst(TM) Proprietary Driver-8.97.100.7....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
    ==> Entering fakeroot environment...
    ==> WARNING: x86_64 system detected
    ==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
    ==> WARNING: OK, lib32-catalyst-utils will be added to the package
    ==> Starting package()...
    patching file etc/ati/authatieventsd.sh
    patching file common/lib/modules/fglrx/build_mod/2.6.x/Makefile
    Hunk #1 succeeded at 68 (offset 2 lines).
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 2136 (offset 30 lines).
    Hunk #2 succeeded at 2153 (offset 30 lines).
    Hunk #3 succeeded at 2170 (offset 30 lines).
    Hunk #4 succeeded at 2183 (offset 30 lines).
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 3710 (offset -182 lines).
    Hunk #2 succeeded at 3744 (offset -182 lines).
    Hunk #3 succeeded at 3767 (offset -182 lines).
    Hunk #4 succeeded at 3780 (offset -182 lines).
    Hunk #5 succeeded at 3826 (offset -182 lines).
    Hunk #6 succeeded at 3865 (offset -182 lines).
    Hunk #7 succeeded at 3883 (offset -182 lines).
    Hunk #8 succeeded at 3908 (offset -182 lines).
    patching file common/lib/modules/fglrx/build_mod/kcl_acpi.c
    patching file common/lib/modules/fglrx/build_mod/drmP.h
    patching file common/lib/modules/fglrx/build_mod/drm_proc.h
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 571 (offset -12 lines).
    Hunk #2 succeeded at 861 (offset -12 lines).
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    patch unexpectedly ends in middle of line
    Hunk #1 succeeded at 34 with fuzz 1.
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 97 with fuzz 2 (offset 4 lines).
    patching file common/lib/modules/fglrx/build_mod/kcl_agp.c
    patching file common/lib/modules/fglrx/build_mod/kcl_acpi.c
    Hunk #1 succeeded at 775 (offset -3 lines).
    patching file common/lib/modules/fglrx/build_mod/firegl_public.c
    Hunk #1 succeeded at 1756 with fuzz 2 (offset -5 lines).
    ==> Tidying install...
    -> Purging unwanted files...
    -> Compressing man and info pages...
    ==> Creating package "catalyst-total-hd234k"...
    -> Generating .PKGINFO file...
    -> Adding install file...
    -> Generating .MTREE file...
    -> Compressing package...
    ==> Leaving fakeroot environment.
    ==> Finished making: catalyst-total-hd234k 13.1-29 (mié ene 7 22:44:01 CST 2015)
    ==> Continue installing catalyst-total-hd234k ? [Y/n]
    ==> [v]iew package contents [c]heck package with namcap
    ==> ---------------------------------------------------
    ==> Y
    [sudo] password for mario:
    [sudo] password for mario:
    loading packages...
    resolving dependencies...
    looking for conflicting packages...
    :: catalyst-total-hd234k and mesa-libgl are in conflict (libgl). Remove mesa-libgl? [y/N] Y
    :: catalyst-total-hd234k and libcl are in conflict. Remove libcl? [y/N] Y
    :: catalyst-total-hd234k and lib32-mesa-libgl are in conflict (lib32-libgl). Remove lib32-mesa-libgl? [y/N] Y
    :: catalyst-total-hd234k and lib32-libcl are in conflict. Remove lib32-libcl? [y/N] Y
    Packages (5) lib32-libcl-1.1-1 [removal] lib32-mesa-libgl-10.4.1-1 [removal] libcl-1.1-4 [removal] mesa-libgl-10.4.1-1 [removal] catalyst-total-hd234k-13.1-29
    Total Installed Size: 222.80 MiB
    Net Upgrade Size: 222.68 MiB
    :: Proceed with installation? [Y/n] Y
    (1/1) checking keys in keyring [############################################################] 100%
    (1/1) checking package integrity [############################################################] 100%
    (1/1) loading package files [############################################################] 100%
    (1/1) checking for file conflicts [############################################################] 100%
    (5/5) checking available disk space [############################################################] 100%
    (1/4) removing lib32-libcl [############################################################] 100%
    (2/4) removing lib32-mesa-libgl [############################################################] 100%
    (3/4) removing libcl [############################################################] 100%
    (4/4) removing mesa-libgl [############################################################] 100%
    (1/1) installing catalyst-total-hd234k [############################################################] 100%
    Building fglrx module for 3.17.6-1-ARCH kernel ...
    Ok.
    Add nomodeset to your kernel line in /boot/grub/menu.lst , ie.:
    kernel /boot/vmlinuz-linux root=/dev/sda1 ro nomodeset
    You can use the tool 'aticonfig' to generate an xorg.conf file.
    --------------------- ^^^^^^^^^ --------------------------------
    fglrx was added into /etc/modules-load.d/catalyst.conf
    atieventsd (needs acpid pkg) on systemd:
    systemctl enable atieventsd
    systemctl start atieventsd
    For more info and troubleshooting visit:
    http://wiki.archlinux.org/index.php/ATI_Catalyst
    ATTENTION!
    To enable 'automatic re-compilation while system shutdown/reboot'
    testing feature run these commands as root:
    systemctl enable catalyst-hook
    systemctl start catalyst-hook
    More info here:
    https://bbs.archlinux.org/viewtopic.php?pid=1255575#p1255575
    Optional dependencies for catalyst-total-hd234k
    qt4: to run ATi Catalyst Control Center (amdcccle) [installed]
    libxxf86vm: to run ATi Catalyst Control Center (amdcccle) [installed]
    opencl-headers: headers necessary for OpenCL development
    acpid: acpi event support / atieventsd [installed]
    linux-lts-headers: to build the fglrx module for the linux-lts kernel
    ==> Checking vote status for catalyst-total-hd234k
    You have already voted for catalyst-total-hd234k
    ==> Packages no longer required by any installed package:
    libepoxy
    - Then, I re-enable catalyst-hook (and optionally atieventsd) to be able to build modules at end and start of pc
    $ sudo systemctl disable catalyst-hook
    Removed symlink /etc/systemd/system/multi-user.target.wants/catalyst-hook.service.
    $ sudo systemctl disable atieventsd
    Removed symlink /etc/systemd/system/multi-user.target.wants/atieventsd.service.
    $ sudo systemctl enable catalyst-hook
    Created symlink from /etc/systemd/system/multi-user.target.wants/catalyst-hook.service to /usr/lib/systemd/system/catalyst-hook.service.
    $ sudo systemctl enable atieventsd
    Created symlink from /etc/systemd/system/multi-user.target.wants/atieventsd.service to /usr/lib/systemd/system/atieventsd.service.
    - Afterwards, I blacklist the radeon module for it not to interfere with fglrx:
    Added "blacklist radeon" on the nano prompt below
    $ sudo nano /etc/modprobe.d/modprobe.conf
    - Then I generate the xorg.conf file, and get the output below with '# aticonfig --initial'
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "Accel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "ColorTiling" # [<bool>]
    #Option "ColorTiling2D" # [<bool>]
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "AccelMethod" # <str>
    #Option "EXAVSync" # [<bool>]
    #Option "EXAPixmaps" # [<bool>]
    #Option "ZaphodHeads" # <str>
    #Option "EnablePageFlip" # [<bool>]
    #Option "SwapbuffersWait" # [<bool>]
    Identifier "Card0"
    Driver "radeon"
    BusID "PCI:1:5:0"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:1:5:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    - Finally I rebuild grub boot to do nomodeset in the kernel
    $ sudo nano /etc/default/grub && sudo grub-mkconfig -o /boot/grub/grub.cfg
    Generating grub configuration file ...
    Found background: /home/mario/Pictures/Wallpapers/974-arch-linux-1366x768-computer-wallpaper.png
    Found linux image: /boot/vmlinuz-linux
    Found initrd image: /boot/initramfs-linux.img
    Found fallback initramfs image: /boot/initramfs-linux-fallback.img
    done
    Then I reboot, only to get to a black screen after the initial dmesg outputs around 10 seconds on boot.
    $ journalctl -xe
    -- Logs begin at lun 2014-12-15 04:28:08 CST, end at mié 2015-01-07 23:07:22 CST. --
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0: [mem 0x100000000-0x13fffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: On node 0 totalpages: 981392
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA zone: 64 pages used for memmap
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA zone: 21 pages reserved
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA zone: 3998 pages, LIFO batch:0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA32 zone: 11176 pages used for memmap
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: DMA32 zone: 715250 pages, LIFO batch:31
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Normal zone: 4096 pages used for memmap
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Normal zone: 262144 pages, LIFO batch:31
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: PM-Timer IO Port: 0x408
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Local APIC address 0xfee00000
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: IRQ0 used by override.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: IRQ9 used by override.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Using ACPI (MADT) for SMP configuration information
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: HPET id: 0x43538301 base: 0xfed00000
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: smpboot: Allowing 4 CPUs, 3 hotplug CPUs
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xaf9f1000-0xafacefff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafacf000-0xafbcefff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafbcf000-0xafbfefff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafc00000-0xdfffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: e820: [mem 0xafc00000-0xdfffffff] available for PCI devices
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Booting paravirtualized kernel on bare hardware
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82752 r8192 d23744 u524288
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: pcpu-alloc: [0] 0 1 2 3
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 966035
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Policy zone: Normal
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8290542b-0457-4fdd-b087-6096554bdcad rw quiet nomodeset
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Checking aperture...
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: No AGP bridge found
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Node 0: aperture [bus addr 0xa4000000-0xa5ffffff] (32MB)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Aperture pointing to e820 RAM. Ignoring.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Your BIOS doesn't leave a aperture memory hole
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Please enable the IOMMU option in the BIOS setup
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: This costs you 64MB of RAM
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: AGP: Mapping aperture over RAM [mem 0xa4000000-0xa7ffffff] (65536KB)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Memory: 3717040K/3925568K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 208528K reserved)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Preemptible hierarchical RCU implementation.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: RCU dyntick-idle grace-period acceleration is enabled.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Dump stacks of tasks blocking RCU-preempt GP.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: NR_IRQS:8448 nr_irqs:456 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: spurious 8259A interrupt: IRQ7.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Console: colour dummy device 80x25
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: console [tty0] enabled
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: allocated 15728640 bytes of page_cgroup
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: hpet clockevent registered
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: tsc: Fast TSC calibration using PIT
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: tsc: Detected 2394.161 MHz processor
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.83 BogoMIPS (lpj=7980536)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: pid_max: default: 32768 minimum: 301
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Core revision 20140724
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: All ACPI Tables successfully acquired
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Security Framework initialized
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Yama: becoming mindful.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys memory
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys devices
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys freezer
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys net_cls
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Initializing cgroup subsys blkio
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: mce: CPU supports 6 MCE banks
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: LVT offset 0 assigned for vector 0xf9
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: process: using AMD E400 aware idle routine
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ftrace: allocating 20687 entries in 81 pages
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: smpboot: CPU0: AMD V160 Processor (fam: 10, model: 06, stepping: 03)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Performance Events: AMD PMU driver.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... version: 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... bit width: 48
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... generic registers: 4
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... value mask: 0000ffffffffffff
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... max period: 00007fffffffffff
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... fixed-purpose events: 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ... event mask: 000000000000000f
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: process: System has AMD C1E enabled
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: process: Switch to broadcast mode on CPU0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: x86: Booted up 1 node, 1 CPUs
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: smpboot: Total of 1 processors activated (4790.83 BogoMIPS)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: devtmpfs: initialized
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PM: Registering ACPI NVS region [mem 0xafacf000-0xafbcefff] (1048576 bytes)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: pinctrl core: initialized pinctrl subsystem
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: RTC time: 5:05:23, date: 01/08/15
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: NET: Registered protocol family 16
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: cpuidle: using governor ladder
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: cpuidle: using governor menu
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: io port [0, ffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: TOM: 00000000c0000000 aka 3072M
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: Fam 10h mmconf [mem 0xe0000000-0xefffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [c0000000, cfffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d0000000, d41fffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4200000, d43fffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4400000, dfffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e0000000, e0ffffff] ==> none
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e1000000, febfffff] ==> [f0000000, febfffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [fec00000, fffeffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [ffff0000, ffffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: TOM2: 0000000140000000 aka 5120M
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: [bus 00-1f] on node 0 link 0
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [io 0x0000-0xffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xc0000000-0xdfffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xf0000000-0xffffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: bus: 00 [mem 0x140000000-0xfcffffffff]
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: bus type PCI registered
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: PCI: Using configuration type 1 for base access
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Module Device)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Device)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Aggregator Device)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: No handler for Region [ECRM] (ffff88013b42ca68) [EmbeddedControl] (20140724/evregion-163)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140724/exfldio-299)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/psparse-536)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/uteval-103)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Interpreter enabled
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: (supports S0 S3 S4 S5)
    ene 07 23:05:30 HP425-Desktop-A-PC kernel: ACPI: Using IOAPIC for interrupt ro

    (EDIT: The outputs are incorrect. First post has them.)
    The output of Xorg last time I booted up with fglrx:
    $ cat /var/log/Xorg.0.log.old
    [ 18.657]
    X.Org X Server 1.16.3
    Release Date: 2014-12-20
    [ 18.657] X Protocol Version 11, Revision 0
    [ 18.657] Build Operating System: Linux 3.18.1-1-ARCH x86_64
    [ 18.657] Current Operating System: Linux HP425-Desktop-A-PC 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
    [ 18.657] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8290542b-0457-4fdd-b087-6096554bdcad rw quiet
    [ 18.657] Build Date: 29 December 2014 01:09:58PM
    [ 18.657]
    [ 18.657] Current version of pixman: 0.32.6
    [ 18.657] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 18.657] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 18.657] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 6 17:29:00 2015
    [ 18.657] (==) Using config file: "/etc/X11/xorg.conf"
    [ 18.657] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 18.657] (==) ServerLayout "X.org Configured"
    [ 18.657] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 18.657] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 18.657] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 18.657] (**) |-->Input Device "Mouse0"
    [ 18.657] (**) |-->Input Device "Keyboard0"
    [ 18.657] (==) Automatically adding devices
    [ 18.657] (==) Automatically enabling devices
    [ 18.657] (==) Automatically adding GPU devices
    [ 18.657] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 18.657] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 18.657] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 18.657] (WW) Disabling Mouse0
    [ 18.657] (WW) Disabling Keyboard0
    [ 18.657] (II) Loader magic: 0x818d80
    [ 18.657] (II) Module ABI versions:
    [ 18.657] X.Org ANSI C Emulation: 0.4
    [ 18.657] X.Org Video Driver: 18.0
    [ 18.657] X.Org XInput driver : 21.0
    [ 18.657] X.Org Server Extension : 8.0
    [ 18.659] (EE) systemd-logind: failed to get session: PID 407 does not belong to any known session
    [ 18.659] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 18.660] (--) PCI:*(0:1:5:0) 1002:9712:103c:1475 rev 0, Mem @ 0xc0000000/268435456, 0xd4300000/65536, 0xd4200000/1048576, I/O @ 0x00005000/256
    [ 18.660] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 18.661] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 18.661] (II) LoadModule: "glx"
    [ 18.661] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 18.662] (II) Module glx: vendor="X.Org Foundation"
    [ 18.662] compiled for 1.16.3, module version = 1.0.0
    [ 18.662] ABI class: X.Org Server Extension, version 8.0
    [ 18.662] (==) AIGLX enabled
    [ 18.662] (II) LoadModule: "fglrx"
    [ 18.662] (WW) Warning, couldn't open module fglrx
    [ 18.662] (II) UnloadModule: "fglrx"
    [ 18.662] (II) Unloading fglrx
    [ 18.663] (EE) Failed to load module "fglrx" (module does not exist, 0)
    [ 18.663] (EE) No drivers available.
    [ 18.663] (EE)
    Fatal server error:
    [ 18.663] (EE) no screens found(EE)
    [ 18.663] (EE)
    Please consult the The X.Org Foundation support
    at [url]http://wiki.x.org[/url]
    for help.
    [ 18.663] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 18.663] (EE)
    The output itself of journalctl -xe
    $ journalctl -xe
    -- Logs begin at Mon 2014-12-15 04:28:08 CST, end at Tue 2015-01-06 17:16:16 CST. --
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 3 base 000100000000 mask FFFFC0000000 write-back
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 4 base 0000FFE00000 mask FFFFFFE00000 write-protect
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 5 base 0000FFF40000 mask FFFFFFFF0000 write-protect
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 6 disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: 7 disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TOM2: 0000000140000000 aka 5120M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: last_pfn = 0xafc00 max_arch_pfn = 0x400000000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Scanning 1 areas for low memory corruption
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Using GB pages for direct mapping
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x00000000-0x000fffff] page 4k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2b000, 0x01b2bfff] PGTABLE
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2c000, 0x01b2cfff] PGTABLE
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2d000, 0x01b2dfff] PGTABLE
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x13fe00000-0x13fffffff] page 1G
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x13c000000-0x13fdfffff] page 1G
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x100000000-0x13bffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x100000000-0x13bffffff] page 1G
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0x00100000-0xaf9f0fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x00100000-0x001fffff] page 4k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x00200000-0x3fffffff] page 2M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x40000000-0x7fffffff] page 1G
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0x80000000-0xaf7fffff] page 2M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0xaf800000-0xaf9f0fff] page 4k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: init_memory_mapping: [mem 0xafbff000-0xafbfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [mem 0xafbff000-0xafbfffff] page 4k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: BRK [0x01b2e000, 0x01b2efff] PGTABLE
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RAMDISK: [mem 0x379a0000-0x37cc7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Early table checksum verification disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: RSDP 0x00000000000F2A70 000014 (v00 HPQOEM)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: RSDT 0x00000000AFBFE038 00003C (v01 HPQOEM SLIC-MPC 00000003 01000013)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: FACP 0x00000000AFBFD000 000074 (v01 HPQOEM 307E 00000003 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: DSDT 0x00000000AFBDE000 01B85D (v01 HPQOEM SB700 00000001 INTL 20060912)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: FACS 0x00000000AFB8F000 000040
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: APIC 0x00000000AFBFC000 000084 (v01 HPQOEM 307E 00000001 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: MCFG 0x00000000AFBFB000 00003C (v01 HPQOEM 307E 00000001 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: SLIC 0x00000000AFBFA000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: HPET 0x00000000AFBDB000 000038 (v01 HPQOEM 307E 00000001 HP 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: SSDT 0x00000000AFBDA000 0001B7 (v01 AMD POWERNOW 00000001 AMD 00000001)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Local APIC address 0xfee00000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Scanning NUMA topology in Northbridge 24
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: No NUMA configuration found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initmem setup node 0 [mem 0x00000000-0x13fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NODE_DATA [mem 0x13fffa000-0x13fffdfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ba00000-ffff88013f5fffff] on node 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Zone ranges:
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA [mem 0x00001000-0x00ffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA32 [mem 0x01000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Normal [mem 0x100000000-0x13fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Movable zone start for each node
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Early memory node ranges
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0x00001000-0x0009efff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0x00100000-0xaf9f0fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0xafbff000-0xafbfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0: [mem 0x100000000-0x13fffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: On node 0 totalpages: 981392
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA zone: 64 pages used for memmap
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA zone: 21 pages reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA zone: 3998 pages, LIFO batch:0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA32 zone: 11176 pages used for memmap
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: DMA32 zone: 715250 pages, LIFO batch:31
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Normal zone: 4096 pages used for memmap
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Normal zone: 262144 pages, LIFO batch:31
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PM-Timer IO Port: 0x408
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Local APIC address 0xfee00000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: IRQ0 used by override.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: IRQ9 used by override.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Using ACPI (MADT) for SMP configuration information
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: HPET id: 0x43538301 base: 0xfed00000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: smpboot: Allowing 4 CPUs, 3 hotplug CPUs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xaf9f1000-0xafacefff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafacf000-0xafbcefff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafbcf000-0xafbfefff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xafc00000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: [mem 0xafc00000-0xdfffffff] available for PCI devices
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Booting paravirtualized kernel on bare hardware
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82752 r8192 d23744 u524288
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcpu-alloc: [0] 0 1 2 3
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 966035
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Policy zone: Normal
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8290542b-0457-4fdd-b087-6096554bdcad rw quiet nomodeset
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Checking aperture...
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: No AGP bridge found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Node 0: aperture [bus addr 0x5728000000-0x5729ffffff] (32MB)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Aperture beyond 4GB. Ignoring.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Your BIOS doesn't leave a aperture memory hole
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Please enable the IOMMU option in the BIOS setup
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: This costs you 64MB of RAM
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: AGP: Mapping aperture over RAM [mem 0xa4000000-0xa7ffffff] (65536KB)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Memory: 3717040K/3925568K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 208528K reserved)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Preemptible hierarchical RCU implementation.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NR_IRQS:8448 nr_irqs:456 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: spurious 8259A interrupt: IRQ7.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Console: colour dummy device 80x25
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: console [tty0] enabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: allocated 15728640 bytes of page_cgroup
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet clockevent registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tsc: Fast TSC calibration using PIT
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tsc: Detected 2393.931 MHz processor
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.35 BogoMIPS (lpj=7979770)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pid_max: default: 32768 minimum: 301
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Core revision 20140724
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: All ACPI Tables successfully acquired
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Security Framework initialized
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Yama: becoming mindful.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys memory
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys devices
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys freezer
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys net_cls
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initializing cgroup subsys blkio
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: mce: CPU supports 6 MCE banks
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: LVT offset 0 assigned for vector 0xf9
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: process: using AMD E400 aware idle routine
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ftrace: allocating 20687 entries in 81 pages
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: smpboot: CPU0: AMD V160 Processor (fam: 10, model: 06, stepping: 03)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Performance Events: AMD PMU driver.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... version: 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... bit width: 48
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... generic registers: 4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... value mask: 0000ffffffffffff
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... max period: 00007fffffffffff
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... fixed-purpose events: 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ... event mask: 000000000000000f
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: process: System has AMD C1E enabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: process: Switch to broadcast mode on CPU0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: x86: Booted up 1 node, 1 CPUs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: smpboot: Total of 1 processors activated (4789.35 BogoMIPS)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: devtmpfs: initialized
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Registering ACPI NVS region [mem 0xafacf000-0xafbcefff] (1048576 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pinctrl core: initialized pinctrl subsystem
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: RTC time: 23:15:36, date: 01/06/15
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 16
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: cpuidle: using governor ladder
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: cpuidle: using governor menu
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: io port [0, ffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TOM: 00000000c0000000 aka 3072M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Fam 10h mmconf [mem 0xe0000000-0xefffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [c0000000, cfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d0000000, d41fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4200000, d43fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [d4400000, dfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e0000000, e0ffffff] ==> none
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [e1000000, febfffff] ==> [f0000000, febfffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [fec00000, fffeffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: node 0 link 0: mmio [ffff0000, ffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TOM2: 0000000140000000 aka 5120M
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: [bus 00-1f] on node 0 link 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [io 0x0000-0xffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xc0000000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [mem 0xf0000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: bus: 00 [mem 0x140000000-0xfcffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: bus type PCI registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: Using configuration type 1 for base access
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Module Device)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Device)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: No handler for Region [ECRM] (ffff88013b42ca68) [EmbeddedControl] (20140724/evregion-163)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140724/exfldio-299)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/psparse-536)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b42b460), AE_NOT_EXIST (20140724/uteval-103)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Interpreter enabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: (supports S0 S3 S4 S5)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Using IOAPIC for interrupt routing
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [APPR] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN0] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN1] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN2] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN3] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Power Resource [PFN4] (off)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xf0000000-0xfffdffff] ignored
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI host bridge to bus 0000:00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: [103c:9602] type 01 class 0x060400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x10: [io 0x6018-0x601f]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x14: [io 0x6024-0x6027]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x18: [io 0x6010-0x6017]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x1c: [io 0x6020-0x6023]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: reg 0x24: [mem 0xd440b000-0xd440b3ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:11.0: set SATA to AHCI mode
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.0: reg 0x10: [mem 0xd440a000-0xd440afff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: reg 0x10: [mem 0xd4409000-0xd44090ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.0: reg 0x10: [mem 0xd4408000-0xd4408fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: reg 0x10: [mem 0xd4407000-0xd44070ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:13.2: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.2: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.5: reg 0x10: [mem 0xd4406000-0xd4406fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.0: reg 0x10: [mem 0xd4405000-0xd4405fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: reg 0x10: [mem 0xd4404000-0xd44040ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x14: [io 0x5000-0x50ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x18: [mem 0xd4300000-0xd430ffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: reg 0x24: [mem 0xd4200000-0xd42fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.1: reg 0x10: [mem 0xd4310000-0xd4313fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.1: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x18: [mem 0xd0010000-0xd0010fff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd000ffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: System wakeup disabled by ACPI
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: acpiphp: Slot [1] registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: PCI bridge to [bus 03-05]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:06:00.0: [14e4:4727] type 00 class 0x028000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:06:00.0: reg 0x10: [mem 0xd2100000-0xd2103fff 64bit]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:06:00.0: supports D1 D2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: PCI bridge to [bus 06]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: on NUMA node 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Enabled 5 GPEs in block 00 to 1F
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: setting as boot device: PCI:0000:01:05.0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: loaded
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vgaarb: bridge control possible 0000:01:05.0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: Using ACPI for IRQ routing
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: pci_cache_line_size set to 64 bytes
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: reserve RAM buffer [mem 0xaf9f1000-0xafffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: e820: reserve RAM buffer [mem 0xafc00000-0xafffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: Initializing
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: domain hash size = 128
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NetLabel: unlabeled traffic allowed by default
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Switched to clocksource hpet
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp: PnP ACPI init
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0400-0x04cf] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x04d0-0x04d1] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x04d6] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0680-0x06ff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x077a] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c00-0x0c01] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c14] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c50-0x0c52] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c6c] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0c6f] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0cd0-0x0cdb] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0220-0x0227] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0260-0x0273] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0800] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0804] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x087f] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0cdc-0x0cdf] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0b00-0x0b0f] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0b20-0x0b3f] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: [io 0x0200-0x027f] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0x000ec000-0x000fffff] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0x00100000-0xbfffffff] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xfeb00000-0xfeb00fff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp 00:04: Plug and Play ACPI device, IDs SYN0177 SYN0100 SYN0002 PNP0f13 (active)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pnp: PnP ACPI: found 5 devices
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:02:00.0: BAR 6: assigned [mem 0xd3200000-0xd321ffff pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: PCI bridge to [bus 03-05]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: PCI bridge to [bus 06]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: PCI bridge to [bus 07]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:00: resource 19 [mem 0xf0000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:02: resource 1 [mem 0xd3200000-0xd41fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd31fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:03: resource 2 [mem 0xd1100000-0xd20fffff 64bit pref]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:06: resource 1 [mem 0xd2100000-0xd21fffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 18 [mem 0xc0000000-0xdfffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_bus 0000:07: resource 19 [mem 0xf0000000-0xffffffff]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP: Hash tables configured (established 32768 bind 32768)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP: reno registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI: CLS mismatch (64 != 32), using 64 bytes
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci 0000:01:05.0: Video device with shadowed ROM
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Unpacking initramfs...
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing initrd memory: 3232K (ffff8800379a0000 - ffff880037cc8000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: Disabling AGP.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: aperture base @ a4000000 size 65536 KB
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: using GART IOMMU.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: microcode: CPU0: patch_level=0x010000c8
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: LVT offset 1 assigned for vector 0x400
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: IBS: LVT offset 1 assigned
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: perf: AMD IBS detected (0x0000001f)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Scanning for low memory corruption every 60 seconds
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: futex hash table entries: 1024 (order: 4, 65536 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Initialise system trusted keyring
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: zpool: loaded
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: zbud: loaded
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: VFS: Disk quotas dquot_6.5.2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: msgmni has been set to 7394
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Key type big_key registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: io scheduler noop registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: io scheduler deadline registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: io scheduler cfq registered (default)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pcieport 0000:00:09.0: irq 26 for MSI/MSI-X
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: mode is 1366x768x32, linelength=5504, pages=0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: scrolling: redraw
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 4160k, total 4160k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Console: switching to colour frame buffer device 170x48
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: fb0: VESA VGA frame buffer device
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: GHES: HEST is not enabled!
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hpet_acpi_add: no address or irqs in _CRS
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Linux agpgart interface v0.103
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: RTC can wake from S4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ledtrig-cpu: registered to indicate activity on CPUs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: TCP: cubic registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 10
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: NET: Registered protocol family 17
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Loading compiled-in X.509 certificates
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: registered taskstats version 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Magic number: 15:578:301
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tty tty30: hash matches
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: rtc_cmos 00:02: setting system clock to 2015-01-06 23:15:37 UTC (1420586137)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: PM: Hibernation image not present or could not be loaded.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing unused kernel memory: 1136K (ffffffff818e2000 - ffffffff819fe000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Write protecting the kernel read-only data: 8192k
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: random: systemd-tmpfile urandom read with 4 bits of entropy available
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: i8042: Detected active multiplexing controller, rev 1.1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: bus type USB registered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usbcore: registered new interface driver usbfs
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usbcore: registered new interface driver hub
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: SCSI subsystem initialized
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usbcore: registered new device driver usb
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci: OHCI PCI platform driver
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: QUIRK: Enable AMD PLL fix
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:12.0: OHCI PCI host controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:12.0: irq 18, io mem 0xd440a000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci: EHCI PCI platform driver
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: libata version 3.00 loaded.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: EHCI Host Controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: debug port 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: irq 17, io mem 0xd4409000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 2-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 2-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 1-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ahci 0000:00:11.0: version 3.0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi host0: ahci
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi host1: ahci
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b100 irq 19
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b180 irq 19
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:13.0: OHCI PCI host controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 3
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:13.0: irq 18, io mem 0xd4408000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: EHCI Host Controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: debug port 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: irq 17, io mem 0xd4407000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 4-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 4-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 3-0:1.0: 5 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: EHCI Host Controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: debug port 1
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: irq 17, io mem 0xd4404000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 5-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 5-0:1.0: 4 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:14.5: OHCI PCI host controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:14.5: irq 18, io mem 0xd4406000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 6-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 6-0:1.0: 2 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:16.0: OHCI PCI host controller
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ohci-pci 0000:00:16.0: irq 18, io mem 0xd4405000
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 7-0:1.0: USB hub found
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: hub 7-0:1.0: 4 ports detected
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usb 2-5: new high-speed USB device number 2 using ehci-pci
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: tsc: Refined TSC clocksource calibration: 2394.005 MHz
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OCA1G, max UDMA/100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata1.00: configured for UDMA/100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54503 CA1G PQ: 0 ANSI: 5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2.00: ATAPI: hp DVDRAM GT30L, mP06, max UDMA/100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ata2.00: configured for UDMA/100
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: scsi 1:0:0:0: CD-ROM hp DVDRAM GT30L mP06 PQ: 0 ANSI: 5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sda: sda1 sda2
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: usb 3-4: new full-speed USB device number 2 using ohci-pci
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: Switched to clocksource tsc
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: random: nonblocking pool is initialized
    Jan 06 17:15:42 HP425-Desktop-A-PC systemd[1]: Cannot add dependency job for unit atieventsd.service, ignoring: Unit acpid.socket failed to load: No such file or directory.
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Sleep Button [SLPB]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: ACPI: Lid Switch [LID]
    Jan 06 17:15:42 HP425-Desktop-A-PC kernel: input:

  • ATI Radeon HD 6520G / 7600M troubles. Glitches, crashing and such.

    I've been am having issues with getting my graphics card to work properly.
    EDIT: tl;dr Running cinnamon with xf86-video-ati is no bueno https://dl.dropbox.com/u/7122698/bbs_ar … adface.png (other stuff happen as well, but this is the most annoying)
    I was using catalyst until recently. When I deemed the glitches and the occasional crashing (which I assumed were caused by the driver) to be too much,
    I decided to switch over to xf86-video-ati.
    While the open source drivers seem to work, they manage to somehow corrupt pixmaps/textures and they manage to hang my computer even more often than the catalyst did.
    I'm running aur/linux-lqx 3.6.4-1-lqx (as well as core/linux 3.6.5-1), extra/xf86-video-ati 1:6.14.6-2, extra/xorg-server 1.13.0-3, extra/gdm 3.6.1-2 and aur/cinnamon 1.6.4-4 . I've
    also moved the damn thing to core/systemd 195-2 with sysvcompat.
    I doubt that the problems are caused by gnome 3.6 having troubles with systemd or ati drivers, as I'm also having texture corruptions in opengl applications (using SDL for init stuff.)
    I'm sure that there is nothing wrong with my cards, as they work fine under windows.
    Right now I'm running using late kms start.
    /etc/X11/ contains configs for twm, xinit and input drivers (all installed by their respective pkgs), as well as the config that I'm using right now:
    /etc/X11/xorg.conf.d/20-radeon.conf
    Section "Device"
    Identifier "UghImSoAngryNow"
    Driver "radeon"
    Option "NoAccel" "on"
    EndSection
    This is, of course, not preferable. However, it fixes nearly all the pixmap corruption problems and I haven't gotten it to die on me yet. Occasionally, my desktop background becomes
    black with lines of varying (read: 50) shades of grey (aka. white noise), before it reloads itself, but haven't crashed yet.
    The wiki page on ATI tells me to try and disable KMS by booting with radeon.modeset=0 or nomodeset. However, this causes Xorg to fall back to xf86-video-vesa, which
    is itself quite glitchy (cursor flickers, all ttys are corrupted (unusable) except for the one I'm on, etc.)
    Any help fixing this would be greatly appreciated.
    (I'll see if I can post screens with the artifacts.)
    Stuff nobody needs:
    $ lspci
    00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex
    00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6520G]
    00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
    00:02.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
    00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
    00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
    00:10.0 USB controller: Advanced Micro Devices [AMD] Hudson USB XHCI Controller (rev 03)
    00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode] (rev 40)
    00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
    00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
    00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13)
    00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01)
    00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11)
    00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40)
    00:14.7 SD Host controller: Advanced Micro Devices [AMD] Hudson SD Flash Controller
    00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
    00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
    00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
    00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
    00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
    00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
    00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
    01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series]
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
    03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    $ cat /var/log/Xorg.0.log # With accel enabled
    [ 10381.855]
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 10381.855] X Protocol Version 11, Revision 0
    [ 10381.855] Build Operating System: Linux 3.6.2-1-ARCH x86_64
    [ 10381.855] Current Operating System: Linux dotfloat-asus 3.6.4-1-lqx #1 ZEN SMP PREEMPT Sun Nov 4 19:35:58 CET 2012 x86_64
    [ 10381.855] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lqx root=UUID=bfd9d0cd-2be7-4539-9dc4-d273dbecbb5d ro resume=/dev/sda6 mem=4G
    [ 10381.855] Build Date: 19 October 2012 03:54:56PM
    [ 10381.855]
    [ 10381.855] Current version of pixman: 0.26.2
    [ 10381.855] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 10381.855] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 10381.855] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 5 22:08:35 2012
    [ 10381.855] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 10381.855] (==) No Layout section. Using the first Screen section.
    [ 10381.855] (==) No screen section available. Using defaults.
    [ 10381.855] (**) |-->Screen "Default Screen Section" (0)
    [ 10381.855] (**) | |-->Monitor "<default monitor>"
    [ 10381.855] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 10381.855] (**) | |-->Device "UghImSoAngryNow"
    [ 10381.855] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 10381.855] (==) Automatically adding devices
    [ 10381.855] (==) Automatically enabling devices
    [ 10381.856] (==) Automatically adding GPU devices
    [ 10381.856] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 10381.856] Entry deleted from font path.
    [ 10381.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 10381.856] Entry deleted from font path.
    [ 10381.856] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 10381.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 10381.856] Entry deleted from font path.
    [ 10381.856] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 10381.856] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 10381.856] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 10381.856] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 10381.856] (II) Loader magic: 0x7fcc20
    [ 10381.856] (II) Module ABI versions:
    [ 10381.856] X.Org ANSI C Emulation: 0.4
    [ 10381.856] X.Org Video Driver: 13.0
    [ 10381.856] X.Org XInput driver : 18.0
    [ 10381.856] X.Org Server Extension : 7.0
    [ 10381.857] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 10381.857] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 10381.858] (--) PCI:*(0:0:1:0) 1002:9647:1043:2122 rev 0, Mem @ 0xb0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
    [ 10381.858] (--) PCI: (0:1:0:0) 1002:6840:1043:2122 rev 0, Mem @ 0xc0000000/268435456, 0xfea20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
    [ 10381.858] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 10381.858] Initializing built-in extension Generic Event Extension
    [ 10381.858] Initializing built-in extension SHAPE
    [ 10381.858] Initializing built-in extension MIT-SHM
    [ 10381.858] Initializing built-in extension XInputExtension
    [ 10381.858] Initializing built-in extension XTEST
    [ 10381.858] Initializing built-in extension BIG-REQUESTS
    [ 10381.858] Initializing built-in extension SYNC
    [ 10381.858] Initializing built-in extension XKEYBOARD
    [ 10381.858] Initializing built-in extension XC-MISC
    [ 10381.858] Initializing built-in extension SECURITY
    [ 10381.858] Initializing built-in extension XINERAMA
    [ 10381.858] Initializing built-in extension XFIXES
    [ 10381.858] Initializing built-in extension RENDER
    [ 10381.858] Initializing built-in extension RANDR
    [ 10381.858] Initializing built-in extension COMPOSITE
    [ 10381.858] Initializing built-in extension DAMAGE
    [ 10381.858] Initializing built-in extension MIT-SCREEN-SAVER
    [ 10381.858] Initializing built-in extension DOUBLE-BUFFER
    [ 10381.858] Initializing built-in extension RECORD
    [ 10381.858] Initializing built-in extension DPMS
    [ 10381.858] Initializing built-in extension X-Resource
    [ 10381.858] Initializing built-in extension XVideo
    [ 10381.858] Initializing built-in extension XVideo-MotionCompensation
    [ 10381.858] Initializing built-in extension XFree86-VidModeExtension
    [ 10381.858] Initializing built-in extension XFree86-DGA
    [ 10381.858] Initializing built-in extension XFree86-DRI
    [ 10381.858] Initializing built-in extension DRI2
    [ 10381.858] (II) LoadModule: "glx"
    [ 10381.859] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 10381.859] (II) Module glx: vendor="X.Org Foundation"
    [ 10381.859] compiled for 1.13.0, module version = 1.0.0
    [ 10381.859] ABI class: X.Org Server Extension, version 7.0
    [ 10381.859] (==) AIGLX enabled
    [ 10381.859] Loading extension GLX
    [ 10381.859] (II) LoadModule: "radeon"
    [ 10381.859] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 10381.859] (II) Module radeon: vendor="X.Org Foundation"
    [ 10381.859] compiled for 1.13.0, module version = 6.14.6
    [ 10381.859] Module class: X.Org Video Driver
    [ 10381.859] ABI class: X.Org Video Driver, version 13.0
    [ 10381.859] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA
    [ 10381.866] (++) using VT number 1
    [ 10381.867] (II) [KMS] Kernel modesetting enabled.
    [ 10381.867] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 10381.867] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 10381.867] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 10381.867] (==) RADEON(0): Default visual is TrueColor
    [ 10381.867] (==) RADEON(0): RGB weight 888
    [ 10381.867] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 10381.867] (--) RADEON(0): Chipset: "SUMO" (ChipID = 0x9647)
    [ 10381.867] (II) RADEON(0): PCIE card detected
    [ 10381.867] (II) Loading sub module "exa"
    [ 10381.867] (II) LoadModule: "exa"
    [ 10381.867] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 10381.906] (II) Module exa: vendor="X.Org Foundation"
    [ 10381.906] compiled for 1.13.0, module version = 2.6.0
    [ 10381.906] ABI class: X.Org Video Driver, version 13.0
    [ 10381.906] (II) RADEON(0): KMS Color Tiling: enabled
    [ 10381.906] (II) RADEON(0): KMS Pageflipping: enabled
    [ 10381.906] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 10382.004] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 10382.044] (II) RADEON(0): Output LVDS has no monitor section
    [ 10382.108] (II) RADEON(0): Output HDMI-0 has no monitor section
    [ 10382.205] (II) RADEON(0): EDID for output VGA-0
    [ 10382.245] (II) RADEON(0): EDID for output LVDS
    [ 10382.245] (II) RADEON(0): Manufacturer: CMO Model: 15a7 Serial#: 0
    [ 10382.245] (II) RADEON(0): Year: 2010 Week: 31
    [ 10382.245] (II) RADEON(0): EDID Version: 1.3
    [ 10382.245] (II) RADEON(0): Digital Display Input
    [ 10382.245] (II) RADEON(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 10382.245] (II) RADEON(0): Gamma: 2.20
    [ 10382.245] (II) RADEON(0): No DPMS capabilities specified
    [ 10382.245] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 10382.245] (II) RADEON(0): First detailed timing is preferred mode
    [ 10382.245] (II) RADEON(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
    [ 10382.245] (II) RADEON(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
    [ 10382.245] (II) RADEON(0): Manufacturer's mask: 0
    [ 10382.245] (II) RADEON(0): Supported detailed timing:
    [ 10382.245] (II) RADEON(0): clock: 69.3 MHz Image Size: 344 x 193 mm
    [ 10382.245] (II) RADEON(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
    [ 10382.245] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
    [ 10382.245] (II) RADEON(0): N156BGE-L21
    [ 10382.245] (II) RADEON(0): CMO
    [ 10382.245] (II) RADEON(0): N156BGE-L21
    [ 10382.245] (II) RADEON(0): EDID (in hex):
    [ 10382.245] (II) RADEON(0): 00ffffffffffff000dafa71500000000
    [ 10382.245] (II) RADEON(0): 1f140103802313780a00259e57529929
    [ 10382.245] (II) RADEON(0): 15505400000001010101010101010101
    [ 10382.245] (II) RADEON(0): 010101010101121b5664500014301022
    [ 10382.245] (II) RADEON(0): 260058c110000018000000fe004e3135
    [ 10382.245] (II) RADEON(0): 364247452d4c32310a20000000fe0043
    [ 10382.245] (II) RADEON(0): 4d4f0a202020202020202020000000fe
    [ 10382.245] (II) RADEON(0): 004e3135364247452d4c32310a200095
    [ 10382.245] (II) RADEON(0): Printing probed modes for output LVDS
    [ 10382.245] (II) RADEON(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
    [ 10382.245] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
    [ 10382.245] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 10382.245] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
    [ 10382.245] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
    [ 10382.245] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
    [ 10382.245] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
    [ 10382.245] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
    [ 10382.309] (II) RADEON(0): EDID for output HDMI-0
    [ 10382.309] (II) RADEON(0): Output VGA-0 disconnected
    [ 10382.309] (II) RADEON(0): Output LVDS connected
    [ 10382.309] (II) RADEON(0): Output HDMI-0 disconnected
    [ 10382.309] (II) RADEON(0): Using exact sizes for initial modes
    [ 10382.309] (II) RADEON(0): Output LVDS using initial mode 1366x768
    [ 10382.309] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 10382.309] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:fba0000
    [ 10382.309] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 10382.309] (==) RADEON(0): DPI set to (96, 96)
    [ 10382.309] (II) Loading sub module "fb"
    [ 10382.309] (II) LoadModule: "fb"
    [ 10382.309] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 10382.309] (II) Module fb: vendor="X.Org Foundation"
    [ 10382.309] compiled for 1.13.0, module version = 1.0.0
    [ 10382.309] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 10382.309] (II) Loading sub module "ramdac"
    [ 10382.309] (II) LoadModule: "ramdac"
    [ 10382.309] (II) Module "ramdac" already built-in
    [ 10382.309] (--) Depth 24 pixmap format is 32 bpp
    [ 10382.309] (II) RADEON(0): [DRI2] Setup complete
    [ 10382.309] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 10382.309] (II) RADEON(0): [DRI2] VDPAU driver: r600
    [ 10382.309] (II) RADEON(0): Front buffer size: 4128K
    [ 10382.309] (II) RADEON(0): VRAM usage limit set to 228182K
    [ 10382.309] (==) RADEON(0): Backing store disabled
    [ 10382.309] (II) RADEON(0): Direct rendering enabled
    [ 10382.379] (II) RADEON(0): Setting EXA maxPitchBytes
    [ 10382.379] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 10382.379] (II) EXA(0): Driver registered support for the following operations:
    [ 10382.379] (II) Solid
    [ 10382.379] (II) Copy
    [ 10382.379] (II) Composite (RENDER acceleration)
    [ 10382.379] (II) UploadToScreen
    [ 10382.379] (II) DownloadFromScreen
    [ 10382.379] (II) RADEON(0): Acceleration enabled
    [ 10382.379] (==) RADEON(0): DPMS enabled
    [ 10382.379] (==) RADEON(0): Silken mouse enabled
    [ 10382.379] (II) RADEON(0): Set up textured video
    [ 10382.379] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [ 10382.379] (II) RADEON(0): [XvMC] Extension initialized.
    [ 10382.379] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 10382.379] (--) RandR disabled
    [ 10382.749] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 10382.749] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 10382.749] (II) AIGLX: enabled GLX_ARB_create_context
    [ 10382.749] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 10382.749] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 10382.749] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 10382.749] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 10382.750] (II) AIGLX: Loaded and initialized r600
    [ 10382.750] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 10382.775] (II) RADEON(0): Setting screen physical size to 361 x 203
    [ 10382.828] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 10382.828] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 10382.828] (II) LoadModule: "evdev"
    [ 10382.828] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 10382.829] (II) Module evdev: vendor="X.Org Foundation"
    [ 10382.829] compiled for 1.13.0, module version = 2.7.3
    [ 10382.829] Module class: X.Org XInput Driver
    [ 10382.829] ABI class: X.Org XInput driver, version 18.0
    [ 10382.829] (II) Using input driver 'evdev' for 'Power Button'
    [ 10382.829] (**) Power Button: always reports core events
    [ 10382.829] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 10382.829] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 10382.829] (--) evdev: Power Button: Found keys
    [ 10382.829] (II) evdev: Power Button: Configuring as keyboard
    [ 10382.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 10382.829] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 10382.829] (**) Option "xkb_rules" "evdev"
    [ 10382.829] (**) Option "xkb_model" "evdev"
    [ 10382.829] (**) Option "xkb_layout" "us"
    [ 10382.864] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
    [ 10382.864] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 10382.864] (II) Using input driver 'evdev' for 'Video Bus'
    [ 10382.864] (**) Video Bus: always reports core events
    [ 10382.864] (**) evdev: Video Bus: Device: "/dev/input/event6"
    [ 10382.864] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 10382.864] (--) evdev: Video Bus: Found keys
    [ 10382.864] (II) evdev: Video Bus: Configuring as keyboard
    [ 10382.864] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input6/event6"
    [ 10382.864] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 10382.864] (**) Option "xkb_rules" "evdev"
    [ 10382.864] (**) Option "xkb_model" "evdev"
    [ 10382.864] (**) Option "xkb_layout" "us"
    [ 10382.865] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 10382.865] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 10382.865] (II) Using input driver 'evdev' for 'Video Bus'
    [ 10382.865] (**) Video Bus: always reports core events
    [ 10382.865] (**) evdev: Video Bus: Device: "/dev/input/event7"
    [ 10382.865] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 10382.865] (--) evdev: Video Bus: Found keys
    [ 10382.865] (II) evdev: Video Bus: Configuring as keyboard
    [ 10382.865] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:20/LNXVIDEO:01/input/input7/event7"
    [ 10382.865] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 10382.865] (**) Option "xkb_rules" "evdev"
    [ 10382.865] (**) Option "xkb_model" "evdev"
    [ 10382.865] (**) Option "xkb_layout" "us"
    [ 10382.866] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 10382.866] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 10382.866] (II) Using input driver 'evdev' for 'Power Button'
    [ 10382.866] (**) Power Button: always reports core events
    [ 10382.866] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 10382.866] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 10382.866] (--) evdev: Power Button: Found keys
    [ 10382.866] (II) evdev: Power Button: Configuring as keyboard
    [ 10382.866] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 10382.866] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 10382.866] (**) Option "xkb_rules" "evdev"
    [ 10382.866] (**) Option "xkb_model" "evdev"
    [ 10382.866] (**) Option "xkb_layout" "us"
    [ 10382.866] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 10382.866] (II) No input driver specified, ignoring this device.
    [ 10382.866] (II) This device may have been added with another device file.
    [ 10382.866] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 10382.866] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 10382.866] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 10382.866] (**) Sleep Button: always reports core events
    [ 10382.866] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    [ 10382.867] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 10382.867] (--) evdev: Sleep Button: Found keys
    [ 10382.867] (II) evdev: Sleep Button: Configuring as keyboard
    [ 10382.867] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
    [ 10382.867] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
    [ 10382.867] (**) Option "xkb_rules" "evdev"
    [ 10382.867] (**) Option "xkb_model" "evdev"
    [ 10382.867] (**) Option "xkb_layout" "us"
    [ 10382.867] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 10382.867] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event11)
    [ 10382.867] (II) No input driver specified, ignoring this device.
    [ 10382.867] (II) This device may have been added with another device file.
    [ 10382.867] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 10382.868] (II) config/udev: Adding input device Chicony CNFA078 (/dev/input/event9)
    [ 10382.868] (**) Chicony CNFA078: Applying InputClass "evdev keyboard catchall"
    [ 10382.868] (II) Using input driver 'evdev' for 'Chicony CNFA078'
    [ 10382.868] (**) Chicony CNFA078: always reports core events
    [ 10382.868] (**) evdev: Chicony CNFA078: Device: "/dev/input/event9"
    [ 10382.868] (--) evdev: Chicony CNFA078: Vendor 0x4f2 Product 0xb23b
    [ 10382.868] (--) evdev: Chicony CNFA078: Found keys
    [ 10382.868] (II) evdev: Chicony CNFA078: Configuring as keyboard
    [ 10382.868] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input9/event9"
    [ 10382.868] (II) XINPUT: Adding extended input device "Chicony CNFA078" (type: KEYBOARD, id 11)
    [ 10382.868] (**) Option "xkb_rules" "evdev"
    [ 10382.868] (**) Option "xkb_model" "evdev"
    [ 10382.868] (**) Option "xkb_layout" "us"
    [ 10382.868] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event12)
    [ 10382.868] (II) No input driver specified, ignoring this device.
    [ 10382.868] (II) This device may have been added with another device file.
    [ 10382.869] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event13)
    [ 10382.869] (II) No input driver specified, ignoring this device.
    [ 10382.869] (II) This device may have been added with another device file.
    [ 10382.869] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
    [ 10382.869] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 10382.869] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
    [ 10382.869] (**) Asus WMI hotkeys: always reports core events
    [ 10382.869] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
    [ 10382.869] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
    [ 10382.869] (--) evdev: Asus WMI hotkeys: Found keys
    [ 10382.869] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
    [ 10382.869] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input8/event8"
    [ 10382.869] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
    [ 10382.869] (**) Option "xkb_rules" "evdev"
    [ 10382.869] (**) Option "xkb_model" "evdev"
    [ 10382.869] (**) Option "xkb_layout" "us"
    [ 10382.869] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 10382.869] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 10382.869] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 10382.870] (**) AT Translated Set 2 keyboard: always reports core events
    [ 10382.870] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 10382.870] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 10382.870] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 10382.870] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 10382.870] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 10382.870] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    [ 10382.870] (**) Option "xkb_rules" "evdev"
    [ 10382.870] (**) Option "xkb_model" "evdev"
    [ 10382.870] (**) Option "xkb_layout" "us"
    [ 10382.870] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
    [ 10382.870] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [ 10382.870] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [ 10382.870] (II) LoadModule: "synaptics"
    [ 10382.870] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 10382.870] (II) Module synaptics: vendor="X.Org Foundation"
    [ 10382.870] compiled for 1.13.0, module version = 1.6.2
    [ 10382.870] Module class: X.Org XInput Driver
    [ 10382.870] ABI class: X.Org XInput driver, version 18.0
    [ 10382.870] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [ 10382.870] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 10382.871] (**) Option "Device" "/dev/input/event10"
    [ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2436
    [ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1044
    [ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    [ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
    [ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [ 10382.894] (**) Option "TapButton1" "1"
    [ 10382.894] (**) Option "TapButton2" "2"
    [ 10382.894] (**) Option "TapButton3" "3"
    [ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 10382.894] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 10382.904] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
    [ 10382.904] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
    [ 10382.904] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 10382.904] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
    [ 10382.904] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.075
    [ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [ 10382.904] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 10382.904] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [ 10382.904] (II) No input driver specified, ignoring this device.
    [ 10382.904] (II) This device may have been added with another device file.
    [ 10382.904] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 10382.904] (II) No input driver specified, ignoring this device.
    [ 10382.904] (II) This device may have been added with another device file.
    [ 10383.047] (II) RADEON(0): EDID vendor "CMO", prod id 5543
    [ 10383.047] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 10383.047] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
    [ 10383.591] (II) RADEON(0): EDID vendor "CMO", prod id 5543
    [ 10383.592] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 10383.592] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
    [ 10397.163] (II) RADEON(0): EDID vendor "CMO", prod id 5543
    [ 10397.163] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 10397.163] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
    [ 10397.460] (II) RADEON(0): EDID vendor "CMO", prod id 5543
    [ 10397.460] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 10397.460] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
    [ 10565.020] (II) RADEON(0): EDID vendor "CMO", prod id 5543
    [ 10565.020] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 10565.020] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
    [ 10567.301] (II) RADEON(0): EDID vendor "CMO", prod id 5543
    [ 10567.301] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 10567.301] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
    [ 10624.571] (II) RADEON(0): EDID vendor "CMO", prod id 5543
    [ 10624.571] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 10624.571] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
    [ 10656.759] (II) UnloadModule: "synaptics"
    [ 10656.759] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 10656.759] (II) UnloadModule: "evdev"
    [ 10656.759] (II) evdev: Asus WMI hotkeys: Close
    [ 10656.759] (II) UnloadModule: "evdev"
    [ 10656.759] (II) evdev: Chicony CNFA078: Close
    [ 10656.759] (II) UnloadModule: "evdev"
    [ 10656.759] (II) evdev: Sleep Button: Close
    [ 10656.759] (II) UnloadModule: "evdev"
    [ 10656.759] (II) evdev: Power Button: Close
    [ 10656.759] (II) UnloadModule: "evdev"
    [ 10656.759] (II) evdev: Video Bus: Close
    [ 10656.759] (II) UnloadModule: "evdev"
    [ 10656.759] (II) evdev: Video Bus: Close
    [ 10656.759] (II) UnloadModule: "evdev"
    [ 10656.759] (II) evdev: Power Button: Close
    [ 10656.759] (II) UnloadModule: "evdev"
    [ 10656.779] Server terminated successfully (0). Closing log file.
    Last edited by dotfloat (2012-11-06 22:21:05)

    Nope. Minecraft seems to run fine, albeit quite slowly:
    https://dl.dropbox.com/u/7122698/bbs_ar … pyface.png
    Cinnamon screenshot: https://dl.dropbox.com/u/7122698/bbs_ar … adface.png
    The rendering errors at the bottom border of the "Cinnamon Settings" window and the white boxes between the chromium tabs. These are more or less permanent, they stay there until the window is destroyed, and reappear quickly after the window is first rendered. The white noise looking things on the chromium window stay there until the window repaints itself. Moving the chromium window causes the white noise to start flickering.
    The screen froze when I opened a nautilus window and tried to resize it. Xorg.0.log doesn't mention any errors.
    This doesn't happen in Cinnamon 2D, so I assume it has something to do with the OpenGL implementation.
    Forcing 7600M by adding
    BusID "PCI:1:0:0"
    to
    /etc/X11/xorg.conf.d/20-radeon.cfg
    causes Xorg to not even start.
    I'm thinking that I've managed to improperly configure the drivers, although I don't see how.
    Screenshot from aur/doomsday running doom shareware: https://dl.dropbox.com/u/7122698/bbs_ar … s_good.png
    The .wad (data file containing all the game's assets) isn't corrupted. The engine itself might be, as the sprites are always corrupted in the same way. Note the barrel on the right side that has parts of a lower resolution version of itself (mipmapping) and blue armour, the light thingy in the middle that contains a lower resolution of itself and a shotgun ammo, and the pillar in the other room that is just not nice to look at. Moving away or towards the sprite (which effectively changes the mipmap level rendered) might make the sprite look as it is supposed to be.

  • RAID BIOS controlling Sytem HDD, not AHCI

    Hey All,
    I have an XW8400 Bios 2.38, adn I enabled the RIAD+AHCI sata emulation (and I did the regedit trick too) .  AHCI bios loads but it says the my System drive ( SATA DRIVE) is being controlled by the RAID BIOS and not AHCI
    I do have a RAID 0  with LSI not the ESB RAID. Is there a way to disbale the ESB RAID bios so the drives will use AHCI only? 
    Salud

    You really had it working before? Weird - it's not supposed to work! The Promise controller supports either 0 or 1. I can't see how you got 0+1.
    And how can the second (bigger) HDD be the "other array" if you've got mirroring in there somewhere? OK, you can maybe fool a single drive into thinking it's a striped array but no way a mirror is anything other than a second drive which is part of the SAME array as the first drive.
    It looks like you have successfully created a mirrored array using the 2 drives (RAID 1). There's no way you have a striped array accross the 2 drives since they have to be the same size for that to work. Mirroring is OK with drives of different sizes. The trouble is, the extra space on the larger drive is just wasted - the total array space is limited to the size of the smaller drive.
    Since the second drive is just a mirror and the extra space is always unusable, it's no surprise you can't see it in XP. You would never want to read or write specifically to the mirror.

  • Troubles importing and linking media in CS5.5

    I am using CS5.5 and having trouble importing media. Importing .mpg or .VOB files (~30mins length, 1GB size) and both cause Prem to hang and not respond. I can leave it for half an hour and still no progress. However, when using a different computer, no troubles.
    This is a clean install of CS5.5. Have cleared media cache.
    Anyone help?

    System Information
    Time of this report: 5/4/2012, 13:26:57
           Machine name: UF-WST006
       Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120305-1505)
               Language: English (Regional Setting: English)
    System Manufacturer: LENOVO
           System Model: 3132A8M
                   BIOS: LENOVO BIOS Rev: 1.0
              Processor: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (4 CPUs), ~3.1GHz
                 Memory: 4096MB RAM
    Available OS Memory: 3944MB RAM
              Page File: 2917MB used, 4969MB available
            Windows Dir: C:\Windows
        DirectX Version: DirectX 11
    DX Setup Parameters: Not found
       User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
        DWM DPI Scaling: Disabled
         DxDiag Version: 6.01.7601.17514 32bit Unicode
    DxDiag Notes
          Display Tab 1: No problems found.
            Sound Tab 1: No problems found.
              Input Tab: No problems found.
    DirectX Debug Levels
    Direct3D:    0/4 (retail)
    DirectDraw:  0/4 (retail)
    DirectInput: 0/5 (retail)
    DirectMusic: 0/5 (retail)
    DirectPlay:  0/9 (retail)
    DirectSound: 0/5 (retail)
    DirectShow:  0/6 (retail)
    Display Devices
              Card name: Intel(R) HD Graphics Family
           Manufacturer: Intel Corporation
              Chip type: Intel(R) HD Graphics Family
               DAC type: Internal
             Device Key: Enum\PCI\VEN_8086&DEV_0102&SUBSYS_307C17AA&REV_09
         Display Memory: 1760 MB
       Dedicated Memory: 128 MB
          Shared Memory: 1632 MB
           Current Mode: 1680 x 1050 (32 bit) (59Hz)
           Monitor Name: Generic PnP Monitor
          Monitor Model: SMS22A450
             Monitor Id: SAM0836
            Native Mode: 1680 x 1050(p) (59.954Hz)
            Output Type: DVI
            Driver Name: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumdx32,igd10umd32,igd10umd32
    Driver File Version: 8.15.0010.2509 (English)
         Driver Version: 8.15.10.2509
            DDI Version: 10.1
           Driver Model: WDDM 1.1
      Driver Attributes: Final Retail
       Driver Date/Size: 8/31/2011 18:53:20, 8312320 bytes
            WHQL Logo'd: Yes
        WHQL Date Stamp:
      Device Identifier: {D7B78E66-4242-11CF-D77D-7610A9C2C535}
              Vendor ID: 0x8086
              Device ID: 0x0102
              SubSys ID: 0x307C17AA
            Revision ID: 0x0009
    Driver Strong Name: oem15.inf:IntelGfx.NTamd64.6.0:iSNBD0:8.15.10.2509:pci\ven_8086&dev_0102
         Rank Of Driver: 00E62001
            Video Accel: ModeMPEG2_A ModeMPEG2_C ModeWMV9_C ModeVC1_C
       Deinterlace Caps: {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
                         {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
                         {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
                         {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
                         {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
                         {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
                         {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
                         {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
           D3D9 Overlay: Supported
                DXVA-HD: Supported
           DDraw Status: Enabled
             D3D Status: Enabled
             AGP Status: Enabled
    Sound Devices
                Description: Speakers (Realtek High Definition Audio)
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0662&SUBSYS_17AA307C&REV_1001
            Manufacturer ID: 1
                 Product ID: 100
                       Type: WDM
                Driver Name: RTKVHD64.sys
             Driver Version: 6.00.0001.6265 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 12/10/2010 20:12:02, 2676328 bytes
                Other Files:
            Driver Provider: Realtek Semiconductor Corp.
             HW Accel Level: Basic
                  Cap Flags: 0xF1F
        Min/Max Sample Rate: 100, 200000
    Static/Strm HW Mix Bufs: 1, 0
    Static/Strm HW 3D Bufs: 0, 0
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: No, No
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
    Sound Capture Devices
    DirectInput Devices
          Device Name: Mouse
             Attached: 1
        Controller ID: n/a
    Vendor/Product ID: n/a
            FF Driver: n/a
          Device Name: Keyboard
             Attached: 1
        Controller ID: n/a
    Vendor/Product ID: n/a
            FF Driver: n/a
    Poll w/ Interrupt: No
    USB Devices
    + USB Root Hub
    | Vendor/Product ID: 0x8086, 0x1C2D
    | Matching Device ID: usb\root_hub20
    | Service: usbhub
    |
    +-+ Generic USB Hub
    | | Vendor/Product ID: 0x8087, 0x0024
    | | Location: Port_#0001.Hub_#0001
    | | Matching Device ID: usb\class_09
    | | Service: usbhub
    Gameport Devices
    PS/2 Devices
    + HID Keyboard Device
    | Vendor/Product ID: 0x04B3, 0x3025
    | Matching Device ID: hid_device_system_keyboard
    | Service: kbdhid
    |
    + Terminal Server Keyboard Driver
    | Matching Device ID: root\rdp_kbd
    | Upper Filters: kbdclass
    | Service: TermDD
    |
    + HID-compliant mouse
    | Vendor/Product ID: 0x17EF, 0x6019
    | Matching Device ID: hid_device_system_mouse
    | Service: mouhid
    |
    + Terminal Server Mouse Driver
    | Matching Device ID: root\rdp_mou
    | Upper Filters: mouclass
    | Service: TermDD
    Disk & DVD/CD-ROM Drives
          Drive: C:
    Free Space: 380.9 GB
    Total Space: 465.7 GB
    File System: NTFS
          Model: ST3500413AS ATA Device
          Drive: Q:
    Free Space: 1.7 GB
    Total Space: 10.0 GB
    File System: NTFS
          Model: ST3500413AS ATA Device
          Drive: E:
          Model: TSSTcorp DVD-RW SH-216AB ATA Device
         Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes
    System Devices
         Name: Intel(R) Management Engine Interface
    Device ID: PCI\VEN_8086&DEV_1C3A&SUBSYS_307C17AA&REV_04\3&11583659&0&B0
       Driver: n/a
         Name: Intel(R) HD Graphics Family
    Device ID: PCI\VEN_8086&DEV_0102&SUBSYS_307C17AA&REV_09\3&11583659&0&10
       Driver: n/a
         Name: Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D
    Device ID: PCI\VEN_8086&DEV_1C2D&SUBSYS_307C17AA&REV_05\3&11583659&0&D0
       Driver: n/a
         Name: 2nd generation Intel(R) Core(TM) processor family DRAM Controller - 0100
    Device ID: PCI\VEN_8086&DEV_0100&SUBSYS_307C17AA&REV_09\3&11583659&0&00
       Driver: n/a
         Name: Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26
    Device ID: PCI\VEN_8086&DEV_1C26&SUBSYS_307C17AA&REV_05\3&11583659&0&E8
       Driver: n/a
         Name: Realtek PCIe GBE Family Controller
    Device ID: PCI\VEN_10EC&DEV_8168&SUBSYS_307C17AA&REV_06\01000000684CE00000
       Driver: n/a
         Name: Intel(R) 6 Series/C200 Series Chipset Family SMBus Controller - 1C22
    Device ID: PCI\VEN_8086&DEV_1C22&SUBSYS_307C17AA&REV_05\3&11583659&0&FB
       Driver: n/a
         Name: High Definition Audio Controller
    Device ID: PCI\VEN_8086&DEV_1C20&SUBSYS_307C17AA&REV_05\3&11583659&0&D8
       Driver: n/a
         Name: Intel(R) 6 Series/C200 Series Chipset Family PCI Express Root Port 6 - 1C1A
    Device ID: PCI\VEN_8086&DEV_1C1A&SUBSYS_307C17AA&REV_B5\3&11583659&0&E5
       Driver: n/a
         Name: Intel(R) 6 Series/C200 Series Chipset Family PCI Express Root Port 1 - 1C10
    Device ID: PCI\VEN_8086&DEV_1C10&SUBSYS_307C17AA&REV_B5\3&11583659&0&E0
       Driver: n/a
         Name: Intel(R) H61 Express Chipset Family LPC Interface Controller - 1C5C
    Device ID: PCI\VEN_8086&DEV_1C5C&SUBSYS_307C17AA&REV_05\3&11583659&0&F8
       Driver: n/a
         Name: Intel(R) 6 Series/C200 Series Chipset Family 6 Port SATA AHCI Controller - 1C02
    Device ID: PCI\VEN_8086&DEV_1C02&SUBSYS_307C17AA&REV_05\3&11583659&0&FA
       Driver: n/a
    DirectShow Filters
    DirectShow Filters:
    WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7601.17514
    WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7601.17514
    WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7601.17514
    MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385
    Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385
    WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7601.17514
    WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7601.17514
    Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385
    Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385
    Ulead DV Writer,0x00000000,0,0,,
    WMT VIH2 Fix,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
    Record Queue,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
    WMT Switch Filter,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
    WMT Virtual Renderer,0x00200000,1,0,WLXVAFilt.dll,15.04.3508.1109
    WMT DV Extract,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
    WMT Virtual Source,0x00200000,0,1,WLXVAFilt.dll,15.04.3508.1109
    WMT Sample Information Filter,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
    Ulead Ogg Parser,0x00600000,1,1,ulOggParserFilter.ax,1.00.0000.0002
    DV Muxer,0x00400000,0,0,qdv.dll,6.06.7601.17514
    Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7601.17713
    Ulead Push Source Filter,0x00000000,0,0,,
    Ulead Sub-Picture Push Source Filter,0x00000000,0,0,,
    Ulead DVSD Push Source Filter,0x00000000,0,0,,
    WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7601.17514
    Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7601.17514
    AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7601.17713
    VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7601.17713
    DV V/A Source Filter,0x00000000,0,0,,
    SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7601.17528
    Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,6.01.7140.0000
    AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
    StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7601.17528
    Ulead DVD Navigator,0x00000000,0,0,UleadDVDNavigator.ax,1.00.0002.0001
    MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
    MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7601.17713
    SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
    Ulead Video Deinterlace Filter,0x00000000,0,0,,
    VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
    DV V/A ACM Source Filter,0x00000000,0,0,,
    MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7601.17528
    Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7601.17514
    SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7601.17528
    Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
    DV Video Source Filter,0x00000000,0,0,,
    Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
    MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7601.17713
    DV Splitter,0x00600000,1,2,qdv.dll,6.06.7601.17514
    Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7601.17713
    Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7601.17514
    Ulead DV Scene Detect,0x00000000,0,0,,
    ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7601.17713
    Video Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
    MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7601.17528
    Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7601.17713
    Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7601.17713
    Video Renderer,0x00400000,1,0,quartz.dll,6.06.7601.17713
    File Writer,0x00200000,1,0,WLXVAFilt.dll,15.04.3508.1109
    Ulead DVD Video decoder 2,0x00000000,0,0,,
    VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7601.17514
    WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7601.17514
    Dib Output,0x00000000,0,0,,
    VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7601.17514
    Dib Receive,0x00000000,0,0,,
    File writer,0x00200000,1,0,qcap.dll,6.06.7601.17514
    iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7601.17514
    iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7601.17514
    Ulead OggVorbis Encoder,0x00400000,1,1,ulOggVorbisEncoderFilter.ax,1.00.0000.0001
    Ulead MPEG Transcoder,0x00000000,0,0,,
    DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7601.17713
    ULead Infinite Pin Tee,0x00200000,1,1,UInfTee.ax,1.00.0000.0011
    Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7601.17713
    Ulead MPEG-4 Encoder,0x00000000,0,0,,
    Ulead MPEG-4 Splitter,0x00000000,0,0,,
    Ulead MPEG-4 Audio Decoder,0x00000000,0,0,,
    Ulead MPEG-4 Video Decoder,0x00000000,0,0,,
    Ulead AMR Audio Decoder,0x00000000,0,0,,
    Ulead MPEG-4 ASP Video Decoder,0x00000000,0,0,,
    AVI Draw,0x00600064,9,1,quartz.dll,6.06.7601.17713
    Ulead DVD Audio decoder 2,0x00200001,1,1,ulDVDAudio.ax,2.00.0000.0057
    RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll,
    Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
    WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7601.17514
    MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
    DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7601.17514
    Ulead DVD Parser,0x00000000,0,0,,
    SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7601.17514
    Null Renderer,0x00200000,1,0,qedit.dll,6.06.7601.17514
    MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7601.17514
    Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7601.17514
    StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7601.17528
    Smart Tee,0x00200000,1,2,qcap.dll,6.06.7601.17514
    Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7601.17713
    AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
    Ulead MPEG Splitter,0x00200002,1,2,ulspmpeg.ax,1.00.0000.0147
    Ulead MPEG Audio Decoder,0x00400000,1,1,ulDVDAudio.ax,2.00.0000.0057
    Ulead MPEG Video Decoder,0x00400000,1,1,uldsmpeg.ax,1.00.0000.0090
    Ulead MPEG Encoder,0x00000000,0,0,,
    Ulead MPEG Audio Encoder,0x00200000,1,1,uleaMPEG.ax,1.00.0000.0022
    Ulead MPEG Muxer,0x00000000,0,0,,
    ULead File Writer,0x00000000,0,0,,
    ULead File Source (Async.),0x00400000,0,1,ulasync.ax,1.00.0000.0018
    Ulead H264 Decoder,0x00000000,0,0,,
    AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7601.17713
    Wave Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
    MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
    Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
    File stream renderer,0x00400000,1,1,quartz.dll,6.06.7601.17713
    Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000
    StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7601.17528
    AVI Mux,0x00200000,1,0,qcap.dll,6.06.7601.17514
    Ulead DV SubTitle Filter,0x00000000,0,0,,
    Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7601.17713
    File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7601.17713
    File Source (URL),0x00400000,0,1,quartz.dll,6.06.7601.17713
    Ulead DVB Parser,0x00000000,0,0,,
    Ulead Audio Dual Channel Filter,0x00000000,0,0,,
    Ulead OggVorbis Decoder,0x00400000,1,1,ulOggVorbisDecoderFilter.ax,1.00.0000.0001
    Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7601.17514
    BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7601.17669
    MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7601.17713
    WDM Streaming Tee/Splitter Devices:
    Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
    Video Compressors:
    WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385
    WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385
    MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385
    DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7601.17514
    MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7601.17713
    Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Audio Compressors:
    WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385
    WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385
    IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
    PCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
    Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
    GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7601.17713
    DV Audio -- NTSC,0x00200000,1,1,quartz.dll,6.06.7601.17713
    DV Audio -- PAL,0x00200000,1,1,quartz.dll,6.06.7601.17713
    MPEG Audio Layer3,0x00200000,1,1,quartz.dll,6.06.7601.17713
    Messenger Audio Codec,0x00200000,1,1,quartz.dll,6.06.7601.17713
    CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
    CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
    MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7601.17713
    PBDA CP Filters:
    PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7601.17528
    PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
    PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
    Midi Renderers:
    Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
    Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7601.17713
    WDM Streaming Capture Devices:
    Realtek HD Audio Line input,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
    Realtek HD Audio Mic input,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
    Realtek HD Audio Stereo input,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
    WDM Streaming Rendering Devices:
    Realtek HD Audio output,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
    BDA Network Providers:
    Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
    Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
    Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
    Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
    Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7601.17514
    Multi-Instance Capable VBI Codecs:
    VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
    BDA Transport Information Renderers:
    BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7601.17669
    MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7601.17514
    BDA CP/CA Filters:
    Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7601.17708
    Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7601.17708
    PTFilter,0x00200000,0,0,EncDec.dll,6.06.7601.17708
    XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7601.17708
    WDM Streaming Communication Transforms:
    Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
    Audio Renderers:
    Speakers (Realtek High Definiti,0x00200000,1,0,quartz.dll,6.06.7601.17713
    Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
    Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7601.17713
    DirectSound: Speakers (Realtek High Definition Audio),0x00200000,1,0,quartz.dll,6.06.7601.17713
    EVR Power Information
    Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality)
      Quality Flags: 2576
        Enabled:
        Force throttling
        Allow half deinterlace
        Allow scaling
        Decode Power Usage: 100
      Balanced Flags: 1424
        Enabled:
        Force throttling
        Allow batching
        Force half deinterlace
        Force scaling
        Decode Power Usage: 50
      PowerFlags: 1424
        Enabled:
        Force throttling
        Allow batching
        Force half deinterlace
        Force scaling
        Decode Power Usage: 0

  • P6-2016 New MoBo but I need to install AHCI drivers for it to work

    Hey I just got a new motherboard for a haswell processor and some new ram. The thing that I'm having trouble with is if I try to boot with the new Motherboard CPU and Ram I will get a 0x7 boot error which means that the boot drive isn't being detcted, after hours and hours of forum searching and my own troubleshooting it seems I need to install the AHCI drivers onto the HDD because HP doesn't install them when they ship the systems because thats not what mode Your computers boot in (so I've seen), but that just so happens to be the mode that my new board boots with, and well without those drivers, I'm sure you can figure it out. So here's what I did next I went onto the intel website and got their AHCI drivers but if I try to install them then it will say that my system does not meet the mnimum requirements to install the software. And well without those drivers.... I've just got $400 of new PC parts just laying on my desk. 
    P.S. I heard you guys will offer a free win 7 copy if I give you a product key or something like that but a clean install is the LAST THING I WANT TO DO!

    HI wizardofozz:
    Thank you for your inquiry.
    To be able to assist you I need some additional details.
    What model P6 do you have?
    What OS are you running?
    What was the complete error message?
    What motherboard did you purchase.
    What Haswell  processor did you install?
    What ram did you install?
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • X120e hard drive replacement

    Well my X120e is ordered, obviously have a little bit to wait lol so I have been investigating the hard drive replacement I will likely get.
    Essentially I have narrowed it down to two choices:
    1. Western Digital Scorpio Black 500GB 7200 RPM - $74.99
    http://www.newegg.ca/Product/Product.aspx?Item=N82E16822136692
    2. Seagate Momentus XT hybrid drive 500GB 7200 RPM + 4GB SSD - $119.99
    http://www.newegg.ca/Product/Product.aspx?Item=N82E16822148591
    (Also considering the 320GB version of both of these, drops the price difference to $35.)
    The price isn't the end of the world but obviously I would only want to spend the cash on the seagate if it is actually worth it.  I have a few questions.
    1.  Is the SSD on the seagate actually quick, or is it more of a gimmick?  Will it give me speed improvements given that it is only running on a 3.0 GB/s connection rather than the 6.0 that most modern SSD's are running on?
    2.  I have heard that people are having issues with the seagate hybrids, anyone have any experience with this?
    3.  One of the most important things to me would be improving boot time, which of these drives is going to give me a noticeable improvement in that? If there is a difference at all.
    4.  General question about replacing the hard drive: Lenovo has optimized windows for improved boot time on their computers (thinkpad experience or something like that??), is there anyway to preserve this after replacing the hard drive?
    5.  Any general thoughts you have on the two drives above, or hard drive replacements in general!
    Thanks! Can't wait to get my thinkpad.

    Yeah, that's what I was hearing about the hybrid drive having some issues.  Though I don't have any first hand experience.
    The Hybrid Drives gain performance boost when the data is sitting in the SSD portion (such as when you restart an OS, the startup for the second and further times would be shorter cause by that time it's using the SSD portion of the hybrid drive).
    http://www.notebookreview.com/default.asp?newsID=5818&review=ssd+vs+hard+drive  Has both the WD Scorpio Black and Seagate Momentus XT in tests.
    Seems the Seagate Momentus outperforms the WD Scorpio Black consistently in multiple tests... Just that hybrid drive issue....  Something to ponder about.
    3.0 GB/s is SATA II while 6.0 GB/s is SATA III which just started coming out.  Supposedly the power saving features of laptops start getting in the way of 200+ MB/s SSD's performance, so SATA 3.0GB/s would be more than enough (since SATA III SSD are in the 500+ MB/s)
    According to the benchmark, Momentus XT has a faster boot time.
    If you make a Factory Recovery disc from the standard HDD that came in your Lenovo X120e, you can use that to install onto your new HDD to get the 'benefits' that Lenovo has added to the Windows 7 partition.  This will require a cd/dvd drive unless there's a way to put the recovery onto the USB.  You can only make one rescue and recovery disc, so the second partition which is to store the rescue and recovery data can be deleted and merged into your main partition after you finish installing the OS and setting it up.
    The thing I'm concerned with is how Windows 7 handles that SSD in the Seagate Hybrid... If it tries to defrag it, then that's a nono cause it will do unnecessary writing to the SSD that doesn't benefit the SSD at all.  Unsure if you'll need to do an 'upgrade' install on top of the lenovo OS rescue and recovery partition to have Windows 7 set up correctly for SSD usage.  You should look into any information about how windows 7 handles hybrid drives (since windows 7 turns off certain services if it recognizes SSD).
    G'luck!
    P.S. If the SSD portion of Seagate Hybrid acts like any other SSD and accepts TRIM command, you should probalby install the latest AMD SATA controller or revert to Microsoft AHCI controller for passing of TRIM command from Windows 7.
    For a compilation of most X120e issues:
    Compilation of Lenovo X120e issues and solutions

  • Troubles with WiFi setup

    Hi there, I am new in the Arch-world, and I am having some troubles in installing this OS.
    I have read every documentation file I found in the web, unfortunately I can't connect the pc to my wifi network.
    First, I used LiLi to create a bootable iso on my IoMega HD.
    I followed (mainly, but not only because I read other resources on the web) the Wiki wireless setup guide, but with no success.
    I have a broadcom wifi card (BCM4313) and according to Ubuntu doc I should not have any troubles.
    Using the "wifi-menu" command, I get this error message:
    Job for netctl@wlp10s0\x2dTNCAPD1D28F.service failed. See 'systemctl status netctl@wlps0\x2dTNCAPD1D28F.service' and 'journalctl -xn' for details.
    Thank you very much!

    cris9288 wrote:
    if those modules aren't loaded then you can proceed to the next steps. For broadcom-wl to work, the other modules (brcmsmac) have to be removed. If you install broadcom-wl from the aur, it will create a file which automatically blackulists those modules. You then have to make sure you load wl, and it's deps (may be loaded automatically) at boot.
    Also, keep in mind that the interface names might be different from the brcmsmac names under the wl module. Always check iwconfig/ip link. The numbers that appear in front of your prompt are the return values from the previous operation, I believe.
    what modules do you have loaded right now? You can check with lsmod.
    When I write # modprobe wl, I get another error message:
    modprobe: FATAL: Module wl not found
    Right now I am unable to take a photo, so this is the list of the modules (note that the list fills the display, so probably there are more mods up):
    lis3lv02d
    mei
    ac
    input_polldev
    battery
    processor
    evdev
    lpc_ich
    nfs
    lockd
    sunrpc
    fscache
    ext4
    crc16
    mbcache
    jbd2
    dm_snapshot
    dm_mod
    squashfs
    loop
    nls_cp437
    vfat
    fat
    usb_storage
    sr_mod
    cdrom
    sd_mod
    rtsx_pci_sdmmc
    mmc_core
    ahci
    libahci
    i915
    libata
    intel_agp
    intel_gtt
    crc32c_intel
    nouveau
    i2c_algo_bit
    mxm_wmi
    ttm
    scsi_mod
    drm_kms_helper
    ehci_pci
    xhci_hcd
    rtsx_pci
    ehci_hcd
    r8169
    mii
    drm
    usbcore
    usb_common
    i2c_core
    wmi
    video
    button

  • Pavilion 15-E055ST AHCI MODE PROBLEM

    Herkese merhabalar. Hp Pavilion 15-E055ST model laptobum var. Samsung SSD 850 EVO 250 GB ürününü aldım. Pc ye taktım. Sata 2 de çalışıyor. Sata 3 e geçiremedim. Biosta da Ahci mod yok. Seçim yapamıyorum. Çözümü nedir bunun?. Chipset HM86 sata 3 desteklemez mi?

    Hi @abdserin1990 
    Welcome to the HP Support Forums!
    I understand that you wish to enable support for AHCI for a replacement hard drive. I have had a bit of trouble finding something direct, but did find this page which may be helpful, even though it is mostly referencing Windows XP.
    HP Notebook PCs - How to Add Serial ATA (SATA) Drives to a Windows Installation
    Also , I found these pages related to drive preparation that should also be useful.
    HP Notebook Hard Drives & Solid State Drives Identifying, Preventing, Diagnosing and Recovering from...
    Preparing Advanced Format hard drives for Microsoft Windows installations on HP Business Notebook PC...
    If you still need more help let me know and I will see what else I can find. What options are you seeing in the BIOS?
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Maybe you are looking for