AHH!  FLOATING AUDIO METER FAILS TO REGISTER EACH FRAME'S LEVEL!

I have a problem regarding the floating audio meter - ie, the small 2 track meter that usually sits next to the tools strip in the standard window setup. For some reason, when I scroll along clips in my timeline (using the left/right arrow keys) it doesnt show the levels of each individual frame, nor does it produce the sound that should be heard from that specific frame. This is a huge problem for me, as I am trying hard to sync up clips to music, and I am now stuck with just guessing where I should cut it based on intuition. Also, along with the floating audio meter, the actual audio mixer doesn't register the levels either when trying to move frame by frame. I must make it clear that when in preview(play) mode, the audio does register and can be seen moving along with the sounds produced, but when i press space(stop) it(the level of audio) simply stays put, and does NOT change from the time that I last stopped playing the sequence.
If I am being to confusing, I am trying to be able to (while moving frame by frame with the arrow keys) see and literally hear each individual frame in efforts to make synchronizing a **** of a lot easier and more practical.
This has never been a problem before, and has just recently burdened me. I have tried restarting the settings/preferences, starting new projects, looking in the manual, etc. No dice. Can someone please help me restore FCP's ability to hear each frames audible material, as well as witness each specific decibel level of the individual frames as I arrow across?

Well...
if you make sure scrubbing is on, that would help.
You can also turn on the waveforms in the timeline tracks.
That should help too.

Similar Messages

  • Connection betw. Sound Pref/VoiceOver Level/Floating Audio Meter

    In working with the Voice Over tool, and trying to get my levels right, a few questions came up:
    1. Do the settings in Apple Pref > Sound > Input need to be checked/verified each time a recording is made? (They seem to be reverting to some default setting on my system between recordings.)
    2. How do the "Input volume" and "Input level" in Apple Pref > Sound > Input affect the "Level" in the "Input" section of the Voice Over Tool, and FCE's general "Floating Audio Meter"?
    3. What's the relationship between the "Level" meter bar in the Voice Over Tool Bench and FCE's general Floating Audo Meter?
    4. In the Voice Over Tool under "Headphones": How does headphone volume/db affect overall levels/mix?
    *Thanks for helping me get a consolidated view on how these elements interact.*

    Well...
    if you make sure scrubbing is on, that would help.
    You can also turn on the waveforms in the timeline tracks.
    That should help too.

  • How do I apply a filter to a video clip? (Without having to do it individually to each frame)

    How do I apply a filter to a video clip? (Without having to do it individually to each frame)

    put levels on which you want to apply the filter, you will see them in the time line as a group ten apply filter, you can also adgust them all in time line...
    sam

  • Error message on restart: Failed to register application management beans

    We are receiving an error when deploying custom task flows to the spaces instance in our Development environment and are experiencing the following problems:
    Custom taskflow instances are all being "overwritten" by a single parameter (we have a webcam 'widget' each space points do a different location, but when we deploy they all suddenly point to the same place - this is not reflected in the parameters for the instance of the task flow).
    Errors we are finding when we deploy:
    Message Level     1
    Relationship ID     0
    Component     xx_xx_Spaces
    Module     oracle.webcenter.webcenterapp.internal.view.webapp
    Host     xx.xx.com
    Host IP Address     xx.xx.xx.xx
    Thread ID     [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'
    ECID     014fc7558b241cc9:-13d743d3:1367e1ed952:-8000-000000000001096f
    Supplemental Detail     javax.management.InstanceAlreadyExistsException: oracle.webcenter.community:name=LoadTranslationsMXBeanImpl,type=LoadTranslationsMXBeanImpl,Application=webcenter,ApplicationName=webcenter,ApplicationVersion=11.1.1.4.0
    at com.sun.jmx.mbeanserver.Repository.addMBean(Repository.java:453)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.internal_addObject(DefaultMBeanServerInterceptor.java:1484)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:963)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:917)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
    at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterAppContextListener.createAndRegisterMBeans(WebCenterAppContextListener.java:389)
    at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterAppContextListener.contextInitialized(WebCenterAppContextListener.java:233)
    at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
    at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)..
    Message Level     1
    Relationship ID     0
    Component     xx_xx_Spaces
    Module     oracle.webcenter.webcenterapp.internal.view.webapp
    Host     xx.xx.com
    Host IP Address     xx.xx.xx.xx
    Thread ID     [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'
    ECID     014fc7558b241cc9:-13d743d3:1367e1ed952:-8000-000000000001096f
    Message     Failed to register application management beans
    I have searched please help.
    Edited by: jrickoi on Apr 6, 2012 2:38 PM
    Edited by: jrickoi on Apr 6, 2012 3:02 PM

    I have no idea except to suggest you contact them.

  • DTSAGENT.DLL failed to register when trying to install CRRuntime_32bit_13_0_7

    Hello together,
    maybe some can help me with an installing issue with CRRuntime_32bit_13_0_7.
    When i try to run the setup i get the error:
    Error 1904. Module C:\Program Files\SAP BusinessObjects\Crystal
    Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dtsagent.dll failed to register.
    HRESULT -1073741819. Contact your support personnel.
    I found something following the link: http://scn.sap.com/thread/1948999 but it didn´t really fix my problem. I think it´s a problem with the constellation of McAfee that is also using the dtsagent.dll
    I welcome each comment, feedback and each suggestion which could help me to fix this problem.
    Thanks
    Chris

    Hi Chris,
    This issue has been discussed many times before. Please use the top right corner search box.
    I searched for "error, 1904, install, crystal, visual studio" keywords and here are the results.
    http://search.sap.com/ui/scn#query=error%2C+1904%2C+install%2C+crystal%2C+visual+studio&startindex=1&filter=scm_a_site%28scm_v_Site11%29&filter=scm_a_modDate%28*%29&timeScope=all
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

  • Software installation external audio interface fails Terratec dmx6 fire usb

    Software installation external audio interface fails Terratec dmx6 fire usb.
    Dear Apple Power User in this forum,
    here is a question for some of us experts.
    I have a external usb audio interface Terratec, Model: DMX 6 fire USB.
    http://www.terratec.net/en/products/technical-data/produktetechnische_daten_en3246.html
    0. There should be after install enclosing software an control app in the app folder, but it isnt there. Why?
    1. the attached installer protocol seems to be normal. isnt it?
    2. the usb audio hardware appears in system profiler.
    3. there isnt the audio hardware in audio-midi-setup! Why?
    4. one of the installed content is visibil in activity monitor as an extension "35 DMX6FireService root 0,0 1 964,00 KB 18,55 MB 22 Intel 00.01 176,00 KB 184,00 KB 73 72"
    5. an other part is in the system-library-extension folder "TTDMX6fire.kext"
    6. other files i am not capacity to find....
    7. and there is the app missing in apps folder! Whitout that it can not work.
    8. Software is for 10.5 and 10.6 32-bit tested from the vendor!?
    9. My MacBookPro early 2008 2.4ghz is capabel of 64bit but is default in 32 mode says apple spec, also my osx 10.5.8 newest updates should be 32 bit. Isnt it?
    10. installation tested whit disconnected/connected ext. volumes or display or these audio interface, whith repaired permissions, on two different macs (second is iMac), whit reboot,
    11. tested on different usb ports, usb port test passed whith other equipment,
    12. on windows xp all works.
    13. tested on a new admin user, same problem.
    14. searched whith terminal command line in applications, nothing.
    15. get software from cd and homepage, no effect.
    16. asked vendor: "until now never had problems like that"
    any ideas? please help!
    for testing or showing the installer look here:
    http://www.terratec.net/en/driver-and-support/driver_21300.html?selectproduct=DM X%206Fire%20USB
    Installation Protocol:
    Dec 25 00:08:39 cadas-macbook-pro /System/Library/CoreServices/Installer.app/Contents/MacOS/Installer[400]: vm_allocate: 0, 0x5800000 - 0x25800000
    Dec 25 00:08:39 cadas-macbook-pro /System/Library/CoreServices/Installer.app/Contents/MacOS/Installer[400]: vm_protect: 0
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: @(#)PROGRAM:Install PROJECT:Install-388
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: @(#)PROGRAM:Installer PROJECT:Installer-281
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Hardware: MacBookPro4,1 @ 2.40 GHz (x 2), 4096 MB RAM
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Running OS Build: Mac OS X 10.5.8 (9L30)
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: TMPDIR=/var/folders/gC/gCDdYZuFE98Z28wIB40BeE+TI/-Tmp-/
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: SHELL=/bin/bash
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: HOME=/Users/cada
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: USER=cada
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: LOGNAME=cada
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: DISPLAY=/tmp/launch-MQSZjG/:0
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: SSHAUTHSOCK=/tmp/launch-x3IAC1/Listeners
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: ApplePubSub_SocketRender=/tmp/launch-YalWkk/Render
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: _CF_USER_TEXTENCODING=0x1F5:0:3
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: SECURITYSESSIONID=a1b410
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: COMMAND_MODE=unix2003
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: DMX6fireUSB Installation Log
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Opened from: /Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg
    Dec 25 00:08:39 cadas-macbook-pro installdb[402]: started (uid 96)
    Dec 25 00:08:39 cadas-macbook-pro installdb[402]: Opened receipt database on '/' with schema 17.
    Dec 25 00:08:45 cadas-macbook-pro installdb[402]: done. (0.004u + 0.003s)
    Dec 25 00:09:10 cadas-macbook-pro runner[403]: Administrator authorization granted.
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: =============================================================================== =
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: User picked Standard Install
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Choices selected for installation:
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "DMX6fireUSB"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "DMX6FireUSBCpl"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#dmx6fireusbcpl.pkg : com.terratec.dmx6fireusb.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#ttdmx6fire.pkg : com.terratec.dmx6fireusb1.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "TTDMX_6fire_CUSTOMEXT"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#ttdmx6firecustomext.pkg : com.terratec.dmx6fireusb2.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "TTDMX6fire"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#ttdmx6fire-1.pkg : com.terratec.dmx6fireusb3.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "DMX6FireService"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#dmx6fireservice.pkg : com.terratec.dmx6fireservice3.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "LaunchDaemon"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#comterratecdmx6fire.pkg : com.terratec.dmx6fireusb4.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: =============================================================================== =
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: It took 0.00 seconds to summarize the package selections.
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#dmx6fireusbcpl.pkg
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#ttdmx6fire.pkg
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#ttdmx6firecustomext.pk g
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#ttdmx6fire-1.pkg
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#dmx6fireservice.pkg
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#comterratecdmx6fire.pk g
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: _installNextPackage of 1
    Dec 25 00:09:15 cadas-macbook-pro installdb[405]: started (uid 96)
    Dec 25 00:09:15 cadas-macbook-pro installdb[405]: Opened receipt database on '/' with schema 17.
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Starting installation:
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Preparing volume "250GB_MBPro2" for installation
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Configuring volume "250GB_MBPro2"
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Preparing disk for local booted install.
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Free space on "250GB_MBPro2": 11,6 GB (12495523840 bytes).
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Create temporary directory "/private/tmp/dmx6fireusb.pkg.400aysS6s"
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Running install actions
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Processing dmx6fireusbcpl:
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: It took 0.06 seconds to create the install plan for dmx6fireusbcpl.
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: run preupgrade script for dmx6fireusbcpl
    Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.pCJk/./preflight[408]: : deleting previous Kernel Extensions
    Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.pCJk/./preflight[408]: PID: 43
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: Initializing new flat-package receipt.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: Extracting...
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: 20 of 20 files written in 0.05 seconds.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: 408 kilobytes installed at 7.5 MB/s.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb.pkg.bom"
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing ttdmx6fire:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.03 seconds to create the install plan for ttdmx6fire.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: Initializing new flat-package receipt.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: Extracting...
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: 9 of 9 files written in 0.01 seconds.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: 92 kilobytes installed at 11.5 MB/s.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb1.pkg.bom"
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing ttdmx6firecustomext:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for ttdmx6firecustomext.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: Initializing new flat-package receipt.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: Extracting...
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: 9 of 9 files written in 0.01 seconds.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: 80 kilobytes installed at 9.7 MB/s.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb2.pkg.bom"
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing ttdmx6fire-1:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for ttdmx6fire-1.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: run preupgrade script for ttdmx6fire-1
    Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.MEBZ/./preflight[424]: : deleting previous Kernel Extensions
    Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.MEBZ/./preflight[424]: PID:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: Initializing new flat-package receipt.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: Extracting...
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: 9 of 9 files written in 0.03 seconds.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: 832 kilobytes installed at 26.2 MB/s.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb3.pkg.bom"
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing dmx6fireservice:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for dmx6fireservice.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: Initializing new flat-package receipt.
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: Extracting...
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: 2 of 2 files written in 0.01 seconds.
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: 136 kilobytes installed at 13.4 MB/s.
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireservice3.pkg.bom"
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Processing comterratecdmx6fire:
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for comterratecdmx6fire.
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: Initializing new flat-package receipt.
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: Extracting...
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: 2 of 2 files written in 0.01 seconds.
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: 8 kilobytes installed at 1.0 MB/s.
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb4.pkg.bom"
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Removing temporary directory "/private/tmp/dmx6fireusb.pkg.400aysS6s"
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finalize disk "250GB_MBPro2"
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Notifying system of updated components
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Touched '/System/Library/Extensions'
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: _installNextPackage of 0
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]:
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: ** Summary Information **
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Operation Elapsed time
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: -----------------------------
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: script 0.29 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: zero 0.02 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: install 1.42 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: validate 0.01 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: os 0.00 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: extract 0.87 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: receipt 0.05 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: disk 1.01 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: config 0.19 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]:
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Starting installation:
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finalizing installation.
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Registering applications
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Touched '/Applications/./DMX6FireUSBCpl.app'
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Touched '/Applications/.'
    Dec 25 00:09:19 cadas-macbook-pro Installer[400]: IFDInstallController 868C80 state = 5
    Dec 25 00:09:19 cadas-macbook-pro Installer[400]: Displaying 'Install Succeeded' UI.
    Dec 25 00:09:24 cadas-macbook-pro installdb[405]: done. (0.026u + 0.040s)

    solved whith the old driver vom archive of vendor: "DMX6Fire_USBMac.1.00c.dmg" thats for 10.5.x for me works.
    The newest from the vendor delivered driver 1.22 (marked for 10.5 and 10.6) seems to not work under 10.5.

  • The Messaging Engine failed to register the adapter for "WCF-BasicHttp"

    Hi,
    I have a strange problem with BizTalk 2013 on Windows 2012.
    It is with exposing an orchestration or schema as a web service, I always get the error "The Messaging Engine failed to register the adapter for 'WCF-BasicHttp' "
    This happens also am sure I did the followings:
    -Enabled the receive location
    -Have separate pool for each web service
    -The pool user is part of the Isolated Group & IIS_Users group
    -The user has access to BizTalk databases
    I tried the procedure on different environment, and it works just fine, what is causing this on this environment really I don't know!!
    Is there something I should do on the IIS?

    I just resolved it, the issue was with the server name exceeding 15 characters; which resulted in mismatch in credentials, since Windows will only take the first 15 characters.
    So, I shortened the server name to 15 characters, and everything now works fine.
    Thanks again,

  • Audio meter

    I am trying to do a sound mix and so far I have trouble seeing anything on the built in audio meters. I digitized via AJA breakout box from Beta SP and I understand that my 0dB on the Beta tape is now a -12 dB on the audio meter. The only trouble is that the meters are so small in the -24dB to -12 dB range that it is virtually impossible to tell anything. Is there a way to calibrate or expand them ?

    Try using the Audio Mixer (Tools->Audio Mixer). You can stretch it out longer making it much easier to see. Not only does it show the two main output channels but also each individual track level you have selected.
    -DH

  • Server 2012 R2 - The system failed to register host (A or AAAA) resource records (RRs) for network adapter

    We seem to be having an issue recently after introducing new Windows Server 2012 R2 servers where they fail to register DNS correctly. The Windows Firewall is off and the servers are on the same VLAN with no firewalls between them.
    When I do an ipconfig /registerdns or wait 24 hours for the system to try we get the following error:
    The system failed to register host (A or AAAA) resource records (RRs) for network adapter
    with settings:
               Adapter Name : {4A0ECF05-193F-4BEA-AA46-BEC593BA752B}
               Host Name : SRV-DATA
               Primary Domain Suffix : internal.local
               DNS server list :
    192.168.0.50, 192.168.0.42
               Sent update to server : <?>
               IP Address(es) :
                 192.168.0.99
    The reason the system could not register these RRs was because the DNS server contacted refused the update request. The reasons for this might be (a) you are not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative
    for this name does not support the DNS dynamic update protocol.
    To register the DNS host (A or AAAA) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
    On our DNS server we have set for the internal.local zone Secure Updates only so that looks good because it is Active Directory that should be handling this authentication to update the record I assume. Just to mention that when also doing an ipconfig /regsiterdns
    the update fails within a few seconds. 
    Source: DNS Clients Events
    Event ID: 8018
    User: NETWORK SERVICE
    This issue is only affecting Windows Server 2012 R2 clients and testing with Windows Server 2008 R2 clients works no issues. So is this a mis-configuration or a bug with Windows 2012 R2? I have checked all DNS settings on client / server which all look good
    to me so reaching out now to see if anyone has any ideas?
    Environment:
    - Windows Server 2012 R2 Domain Controllers (Forest/Domain Levels 2012 R2)
    - Windows Server 2012 R2 Client machines (Physical and Virtual)
    - Windows Server 2008 R2 Client machines (Physical and Virtual)

    The zone is configured as "Secure Only"
    The PDC is the SOA for the zone
    I dont have a packet capture from the DC, only the client. 
    The query you asked me to run is too long to paste in here, however this is the DNS zone it cannot update:
    NotifyServers                     : 
    SecondaryServers                  : {10.2.0.3, 10.2.0.5}
    AllowedDcForNsRecordsAutoCreation : 
    DistinguishedName                 : DC=internal.local,cn=MicrosoftDNS,DC=ForestDnsZones,DC=internal,DC=local
    IsAutoCreated                     : False
    IsDsIntegrated                    : True
    IsPaused                          : False
    IsReadOnly                        : False
    IsReverseLookupZone               : False
    IsShutdown                        : False
    ZoneName                          : internal.local
    ZoneType                          : Primary
    DirectoryPartitionName            : ForestDnsZones.internal.local
    DynamicUpdate                     : Secure
    IsPluginEnabled                   : False
    IsSigned                          : False
    IsWinsEnabled                     : False
    Notify                            : NoNotify
    ReplicationScope                  : Forest
    SecureSecondaries                 : TransferToSecureServers
    ZoneFile                          : 
    PSComputerName                    : 
    CimClass                          : root/Microsoft/Windows/DNS:DnsServerPrimaryZone
    CimInstanceProperties             : {DistinguishedName, IsAutoCreated, IsDsIntegrated, IsPaused...}
    CimSystemProperties               : Microsoft.Management.Infrastructure.CimSystemProperties

  • Getting "querypanel.dll failed to register" on Windows 7 32 bit machine

    Trying to move from CR 2008 SP2 to CR 2008 SP3.
    For the CR 2008 SP2 version of our application, which runs our Crystal .rpt files, we used Visual Studio 2005.  we then created a Visual Studio .msi file, using the merge module (CRRuntime_12_2), to install this application on a target machine that had .NET Framework 2.0 and VC++ Redistributable 2005 SP1 installed. If these two latter prerequisites were not installed, our install would fail because the CEReportSource.dll could not be registered.
    After installing CR SP3 on my development machine, we created a new Visual Studio project, again using Visual Studio 2005. I used CRRuntime_12_3 as the merge module and everything else was the same.
    I was getting this same error message "CEReportSource.dll failed to register" when I attempt to install the SP3 version of the app on the very same machine on which I previously successfully installed the SP2 version. I found an answer in these forums to install Microsoft Visual C++ 2005 SP1 update. Even this did not help. When I installed  MS VC++  2008 Redistributable - x86 9.0.30729.17, finally the problem of "CEReportSource.dll failed to register"  went away on XP and Vista machines.
    Now I am trying to install my program on Windos 7 32 bit machine and I get "querypanel.dll failed to register".
    Q1. By installing S VC++  2008 Redistributable - x86 9.0.30729.17, the problem of "CEReportSource.dll failed to register" did not occur. Is this the right thing to do. I am not sure why VC++ 2005 SP1 did not fix the issue.
    Q2.What do we need in order to prevent "querypanel.dll failed to register" error on Windows 7 32 bit machine.
    Thanks for your time.

    Moved to .NET SDK forum.
    Search here, lots of info on distribution. Likely caused by MS updated the C++ runtime to include security updates. Go to MS's site and download the latest C++ distribution package with enhanced security.
    If you use the CR MSI package rather than the Merge Modules it should work.
    Thank you
    Don
    Edited by: Don Williams on Nov 9, 2010 2:16 PM

  • When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password

    When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password

    See
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
    http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
    which also apply to Mtn Lion and Macericks.

  • DNS failing to register

    Background
    all Server 2012 VMs...1 domain controller, multiple member servers.  I have only one member server that is having DNS issues.  The problem was first discovered while trying to gpupdate /force, which failed stating there's a lack of network connectivity
    with the domain controller, event ID 1129.  I looked in the event logs further and there were event ID 8020 "the system failed to register host (A AAA) resource records for network adapter with settings....", there were also events where the
    time service could not sync with the DC. 
    From there I dropped the server from the domain, and then rejoined it without issue.  It still was having the same errors.  I looked in the DNS Manager on the DC, and the record with that IP address had the wrong host name.  I deleted it,
    and attempted to have the server register the record.  I followed ipconfig /flushdns, and ipconfig /registerdns. Still having the same issues. 
    It is part of the domain, trust relationships seem fine.  Any thoughts?  I can't find anything anywhere on that event ID. 

    Seems like too few info to decide what is your problem. My very first guess is that there is error in VM settings. Make sure that VMs has disabled time synchronization with host. Secon problem may stem from possible port blocking (try without fw) and third
    problem in VM may be caused by wrongly setting IP DNS in NIC parameters.
    Also start with dcdiag to find the health of AD. Do not remember to delete DNS cache whenever you do any chnages is DNS settings.
    Here are references that may help:
    https://technet.microsoft.com/en-us/library/cc727335(v=ws.10).aspx
    If you use DHCP from network router (which is wrong configuration):
    https://support.microsoft.com/en-us/kb/2459530
    HTH
    Milos

  • What's wrong with the audio meter?

    Let me start off by saying that I know the problem I am going to report is a little bit complicated, if my limited grasp of English makes it even harder to understand, please let me know. I'll elaborate on it further.
    At first, I was very happy with the CS6 because the audeo meter at the bottom right can show the volume of video EVEN WHEN i scrub through the clip in the viewer monitor. It is vital to me,because I am so used to editing based on the fluctuance of volume as I edited on FCP .However, I find the audio meter in premiere pro is kind of wonky. when I press left arrow or right arrow to move frame by frame, the the audio meter acts very strangely...I am not sure how to discribe it in words, but I'll give it a try here:
    In FCP 7,the audio meter shows the volume in a very simple way: when I play the video frame by frame, the audio meter fluctuate correspondingly, to show the volume of that individual frame.
    In PP, when I try to play frame by frame, the audio meter gives no reaction in the first couple of frames, then fluctuate . The most mind boggling thing is that when I stop playing the clip, instead of staying as the volume of the frame where I stop (as FCP does), the audio meter in PP slowly falls down to nothing. What gives?  Can I have an audio meter in PP acting just like the one in FCP?  Can anyone give me a hint of what's going on here? Thank you in advance!!

    if you want the peaks to stay, right click on the audio meter and choose static peaks.
    Todd recorded a great video about the audio meter and mixer here:
    http://www.video2brain.com/en/lessons/changes-to-the-audio-mixer-and-audio-meters-panels
    this migh help.
    as for the meter not moving the first few frames, i think, i can't help you.
    and keep smiling

  • I receive the message "Error:  Failed to register" when installing Adobe Flash Player 11.5.502.135 o

    I receive the message "Error:  Failed to register" at the end of attempting to reinstall Adobe Flash Player 11.5.502.135 (after a complete uninstall of all Adobe programs) on my older machine running Windows XP and the older browser IE 7.    I have tried the offline download installer and my Google Chrome browser setting is "allow all sites to run Java".  I allowed the program to run from my AVG firewall dialog box.  Windows firewall did not ask.  I am logged in as administrator.  What should I do because some programs prompt me for this install in order for some functions to work correctly.

    See if this topic contains a solution for your problem: How do I fix Windows permission problems with Flash Player?

  • Apple's Audio Units Fail Validation in Yosemite

    Why do Apple's audio units fail validation in Yosemite
    Anyone else having this problem ?
    What's the fix ?
    Even Logic Pro X 10.0.7 can't validate Apple's AU plugs.
    [Rant:  i have never been so disappointed with a Mac OS as i am with YO.  Most of my midi/audio/video programs will not work because of the validation of AU/VST plugs.  I am this close to trashing Yosemite .  It reminds me of my OS 9 days: if you even looked in the wrong direction the system stop working.]

    are there any AU plugs here, in the components folder...?

Maybe you are looking for

  • Button not Displaying in JRE 1.4.2

    We have one Applet with Image button and it used to work fine with JRE 1.4.1. If I install JRE 1.4.2 in my Machine Image Buttons are not displaying. We coded as follows public class ImageButton extends JButton { private Image image = null ; private A

  • How to take off scroll lock

    i cant drag items to certain areas, any help as to why?

  • Has anyone implemented successfully BTE 00001820?

    Hello, I really do not know what is wrong in my case: - copy sample function module SAMPLE_PROCESS_00001820 to a new z function module and in a new group; in the function i inserted a code that updates a z table. In se37 the function modifies the tab

  • Form Designer ES 8.2 files are two large

    When saving a form made with the adobe version 9 of designer 8.2 the files are 5 times larger than the previous version. With the last version I could do a save-as and not include fonts and the file size was manageable now that option is not availabl

  • Stop xjc generating entire include file

    I have defined a whole bunch of elements in a schema (m_fields.xsd). Another schema (myclass.xsd) uses an <xsd:include> to include m_fields and points to some of its fields (using ref="m_fields fieldname"). My problem is this : when I use xjc.bat to