AHT doesnt start when holding D button?
AHT doest start when holding the D key?
The mid-2011 needs the original installer disc. If you are missing it, call AppleCare.
Similar Messages
-
HT4528 I can't get siri to start when holding down home button?
I can't get siri to start when holding down the home button?
Also, if you want to be able to activate Siri when the iPhone is locked, set Settings > General > Passcode > Siri ON.
-
Why does Satellite Pro A300 not start when the power button is pressed?
Suddenly my new Satellite Pro A300 will not start correctly when the power button is pressed. The situation is this: When I press the power button the Toshiba opening picture (Leading Innovation) appears and disappers quickly. Then there is a black screen for about 30 seconds. Then there is a rectangular frame with the text Microsoft Corporation underneath. And nothing happens however long I wait.
In order to get on with the starting proces I then shut down the computer by pressing down the power button until the computer stops. ("The hard way to shut down")
Now I press the power button shortly to turn on the computer. Then the computer starts normally with the Toshiba opening picture and after a few seconds I am asked to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
What shall I do to get a normal start procedure?When notebook starts normally (after choosing normal mode) shut down your notebook properly using START > Shut down option. Next start should be normal.
When the OS is switched down on irregular way you will be always asked how to start it again (safe or normal mode).
The same happen on my Satellite A300. -
Macbook Pro not starting without Holding Power Button
Hello,
my Macbook Pro (bought March 2008) seems to be dead.
When the power button is pressed (and ONLY IF HELD.. cause if I just push it once it powers up and turns off instantly) it starts and does 2 seconds of normal boot (DVD drive check, HD starts to spin along with the fans) then the power just cuts out and you hear the HD off sound. The LED on the front at this moment keeps flashing and then all goes off.
I tried doing a SMC reset and even a PRAM reset already, but no luck. I've read to try an Hardware Test with the Install DvD so I've inserted it but the MacbookPro powers off before even starting it (The Screen never starts )
What should I do?
Thanks for your help :-SI already tried with the Battery in and without but no luck. I'm sure it's not that kind of problem unfortunally
-
Trouble selecting emails when holding mouse button a fraction too long
I'm setting up a mac mini with Lion installed for an aging friend. When she clicks on a message in Mail she seems to hold the mouse button down a fraction longer than usual and a small image of an envelope appears. The messages does not get selected and therefore does not show up in the preview pane. I'd like to turn off whatever this is or increase the delay time on it. Could you tell me what this is and how to change it?
Thanks,
Derrick (representing Angela)Take a look at System Preferences > Universal Access > Keyboard tab > Slow Keys
You can also adjust the Acceptance Delay.
Regards,
Captfred
Edit: Sorry, try the Mouse & Trackpad tab of Universal Access, Initial Delay. -
My early 2011 15" macbook pro won't run AHT at startup when holding 'D' help???
when i first got my macbook 2 month ago after i put all my stuff onto it i ran a hardware test by resetting the comp and holding 'D' before the chime (i think, not quite sure which botton i pressed it was a while ago) anyway i forgot how to do it so i looked online n it said hold D when restarting, so i did this and nothing happens!!?!?! any advice please?
Since you are using Lion, you better read this thread - https://discussions.apple.com/thread/3217292?start=0&tstart=0 or post in the Lion forum area.
-
my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody
try restoring see guide
http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml -
Im trying to restore my imac as im selling it. Ive followed advice from the internet where when you start it hold down on 'alt' until 2 disks appear but this never happens. I went into Disk Utlity to earse but the earse button is shaded out so it wont let
What OSX was installed when you purchased your Mac? Even though it was installed you should have received the install disk(s) as the Utilities are on those.
If you do not have the install disk you can try contacting Apple and see if they can supply one,(explain you never received at purchase) you will need the build info of your machine, which can be found by clicking the Apple logo in the menu bar>About This Mac>More Info, and it should be in the first window under hardware overview. Model Identifier.
Customer Support:
800-767-2275
Erase instructions
http://support.apple.com/kb/HT3910 -
After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
ThanksAfter iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks -
MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside
Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao. -
[SOLVED]xorg 1.6 crashing when holding any keyboard button.
Hey everybody,
My X keeps crashing when i hold any button, this is really anoying when typing and using backspace or the arrow keys. I'v downgraded to 1.5 again.
i hope someone can help. The linuxwacom packages also isn't compiling anymore.
Last edited by Rio6000 (2009-05-10 05:16:11)My problem is that my X dissapears if i hold about any key board button. Even when i'm typing this post i have to be carefull not to hold the backspace to delete some text.
also i'm running a dual monitor screen setup and when i move my mouse from one screen to the other it passes on to the other screen but it also stays on the first screen.
and i'm not able to see my virtual consoles anymore, it does switch to them but i don't see anything. when my X crashes it's the same, i should be able to see my console but nothing. it does respond however, when i press the up key and then press enter it starts x again because my last command was startx.
i'm running a very minimalistic Openbox with tilda on an updated arch directly updated from the official repo with the nvidia driver.
this is all very anoying
Last edited by Rio6000 (2009-04-13 13:00:07) -
I can get it started when I hold the button down, but then it's extremely slow. What can I do? I ran disk repair yesterday, then it worked fine, right until it just crashed an hour ago while I tried to wake it from 'sleep mode'.
I thankfully got to update my Time Machine on my external harddrive yesterday when I finally got it working.
Anyone who can tell if there's anything I can do to get it up and running again?If this started happening without your having made any changes and without a warning of low disk space, then it's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test or Apple Diagnostics.
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly. -
SC workflow start when pressing button held
Hi,
When we create a SC and then press button hold the approval workflow is started in status waiting. The problem with that is that it already has decided the approvers from the values in the SC when hold was pressed. If we then changes something in the SC that has an impact on the approval it is not considered when we press button order. The workflow continues with the first found approvers.
I have tested to set BBP_WFL_SECURITY to 2 (restart workflow when changes), but this does not seem to have an impact before the SC has been ordered.
Is it possible to turn of the start of the workflow until the button order is pressed? We do not want the workflow to start on hold button and then just wait for the order button to be pressed before continuing..
All tips are appriciated!
Regards,
Kicki WennerboHi,
Which WF are you using for the SC approval?
BR,
Disha. -
I just bought a Airport Time Capsule, time capsule is connected direct from wan to cable modem (it doesnt work). when i connect it to lan port 1, it start working. normal process i know is from cable modem to wan port. 2nd i notice, network is on bridge mode. so my question is how do i make it to work from modem to wan port.
What model is the modem? Is it a pure cable modem or a combined modem router?
This maybe important as the current model TC does have issues with some of the popular cable modems.. SB6121 or 6141 being often the ones complained about here.
If it is a pure cable modem (most will have just one ethernet port). Then power down the modem for 20min. This allows enough time for the MAC address of the first device connected to be lost at the ISP end so it is ready for a new router.
The TC must be in dhcp and nat mode.
Please factory reset the TC and start over.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
By default the TC is in router mode after a reset.
Restart the modem.
The power up the TC and run through the setup utility.
The TC should then be accepted as the main router in the network.
If this fails check the WAN ip address. If it is 10.x.x.x or some other private IP you did not turn off the cable modem for long enough.. Try again only this time leave it off longer. (Some ISP it is just 5min.. some 15.. some will require 60min or overnight). -
my phone turns off and does not turn on, even i tries holding power button n home button for few min.... its shows nothing. i connect it to the computer n it doesnt show in itunes. plz reply wats the prblm wid it
Hi kamalkumar,
I'm sorry to hear you are having issues with your iPhone.
The article below will provide some troubleshooting steps for this issue:
iPhone: Hardware troubleshooting
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged. Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
I hope this information helps ....
Have a great day!
- Judy
Maybe you are looking for
-
I am having a hard time to bridge the actiontec GT704WGB On verizon site there are instructions but they are only for GT704WG without the B. B I beleive is a more latest modem/router combo. Can anyone please help me guiding on how to setup the acti
-
How "windows-ish" is an iMac's USB port?
Hi there, Mac-cognoscenti -- I'm interested in getting a GPS. My son-in-law showed me a pretty powerful-appearing one by Garmin. But when I asked him how you go about updating its sw or map info, he said they only support PCs (yeccch) as the platform
-
Is it a security concern when Flex app in 2 browser tabs share the same session?
This is a common senario. Want to hear from the experts here.
-
Muvo sport 100 and iPod - common file form
Now that santa has brought both, is there a best suggestion for ripping CDs in one format that will accomodate both players? Is MP3 the obvious choice and does that provide reasonable quality? Or I guess the only other common format is WMA? Thanks
-
Error 1406 when attempting ipod update
Hello, I am not the administrator of the family computer. I am one of four users, but I have the ipod and manage the music library. I am unable the update the ipod software from my account. I can download the update, but when I attempt to install I g